A-dec 372L or 572L Dental Light on an A-dec Performer Dental Chair INSTALLATION GUIDE
|
|
|
- Tracey Wright
- 6 years ago
- Views:
Transcription
1 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair INSTALLATION GUIDE Contents Before You Begin Remove the Covers Choose the Procedure Install the Rigid Arm Remove the Halogen Dental Light Install the LED Dental Light on the Back Mount Install the LED Dental Light on the Front Mount Connect the LED Dental Light to the Power Supply Prepare and Adjust the Dental Light Test the Dental Light Reinstall the Covers Regulatory Information L 37L A-dec LED Dental Light on an A-dec Performer Dental Chair Rev B
2 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Before You Begin IMPORTANT This installation guide explains how to install a 37L or 57L dental light on a new A-dec Performer dental chair and how to replace a previously installed halogen dental light with a new LED dental light. NOTE The instructions in this installation guide apply equally to both the 37L and 57L dental lights, except where noted. ATTENTION Circuit boards are sensitive to static electricity. Electrostatic Discharge (ESD) precautions are required when touching a circuit board or making connections to or from the circuit board. Circuit boards should be installed only by an electrician or qualified service person. Recommended Tools 5/6" socket and ratchet () /", 5/8", 3/4" and 5/6" combination wrenches Diagonal cutters Phillips head screwdriver Hex key set Antistatic wrist strap Remove the Covers CAUTION When removing or replacing covers, take care not to damage any wiring or tubing. Verify that the covers are secure after replacing them.. Plug the chair into the mains supply.. Raise the chair to the full base up position. WARNING Failure to turn off or disconnect the power before you begin this procedure can lead to product damage and result in serious injury or death. 3. Unplug the chair from the mains supply Rev B
3 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Remove the Stop Plate Press on one side of the stop plate and pull it away from the lift arm. Remove the Single Piece Floor Box Cover Lift the end of the cover up over the pins on the floor box cover frame. Slide the slots in the end of the cover away from the chair and up over the pins. Choose the Procedure If you are installing a dental light on a new chair, continue with Install the Rigid Arm on page 4. If you are replacing a halogen light with a new LED dental light, continue with the Remove the Halogen Dental Light on page Rev B 3
4 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Install the Rigid Arm Perform the procedure appropriate to your installation: Install the Rigid Arm on the Back Mount Install the Rigid Arm on the Front Mount Install the Rigid Arm on the Back Mount Perform this step if you are installing a dental light on a new A-dec Performer chair. Recommended Tools /4" hex key 3/4" socket and ratchet Task. Plug in the chair. ATTENTION Circuit boards are sensitive to static electricity. Electrostatic Discharge (ESD) precautions are required when touching a circuit board or making connections to or from the circuit board. Circuit boards should be installed only by an electrician or qualified service person. To provide access to the back mount, use the jumper to move the chair back down (BKDN). Back Mount Location 3 Unplug the chair Rev B
5 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Task. Remove the rigid arm from the dental light box. Insert the two bushings into the end of the rigid arm. Bushings Task 3. Remove the tubing from the end of the pivot bolt. Install a Nord-Lock washer onto the pivot bolt. Washer NOTE The Nord-Lock washer consists of two pieces glued together. Do not separate the two pieces Rev B 5
6 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Task 4. Place the lower post into position and insert the pivot bolt. Pivot Bolt Tighten the pivot bolt until the arm is secured firmly in place and does not rotate easily Rev B
7 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Task 5. On the bottom of the pivot bolt, install and securely tighten the jam nut. Jam Nut Next Step Continue with Install the LED Dental Light on the Back Mount on page Rev B 7
8 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Install the Rigid Arm on the Front Mount Perform this step if you are installing a dental light on a Performer dental chair for the first time. Recommended Tools /4" hex key 3/4" socket and ratchet Task. Remove the rigid arm from the delivery system/light box. Insert the two bushings into the end of the rigid arm. Bushings Task. Remove the tubing from the end of the pivot bolt. Install a Nord-Lock washer onto the pivot bolt. NOTE The Nord-Lock washer consists of two pieces glued together. Do not separate the two pieces. Washer Rev B
9 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Task 3. Place the lower post into position and start the pivot bolt. Tighten the bolt until the arm is secured firmly in place and does not rotate easily. Task 4. On the bottom of the pivot bolt, install and securely tighten the jam nut. Jam Nut Next Step Continue with Install the LED Dental Light on the Front Mount on page Rev B 9
10 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Remove the Halogen Dental Light Recommended Tools Phillips head screwdriver Diagonal cutters Disconnect an A-dec Performer Dental Light from the Power Supply Task Disconnect the dental light circuit board from the power supply by removing the two cable adaptors. Disconnect the dental light wires from the terminal strips on the dental light circuit board. Disconnect the data line from the dental light relay circuit board and from the data line connector on the chair circuit board. Use a Phillips head screwdriver to remove the screw that secures the dental light relay circuit board to the power supply. Remove the dental light relay circuit board from the power supply Disconnect an A-dec 57 Dental Light from the Power Supply Task Disconnect the power supply from the dental light relay circuit board by removing the red cable adaptor from the power supply. Disconnect the dental light wires from the dental light relay circuit board. Disconnect the data line from the data line connector on the dental light relay circuit board. Use a Phillips head screwdriver to remove the screw that secures the dental light relay circuit board to the power supply. Remove the dental light relay circuit board from the power supply Rev B
11 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Remove the Halogen Dental Light Wiring Task. Remove the cable tie that secures the wiring and tubing just in front of the mount bolt. Task. Back-Mount Rigid Arm Front-Mount Rigid Arm Back-Mount Tubing Wraps If you are installing the LED dental light on the front-mount rigid arm, remove the two wraps that surround the halogen light wiring and tubing that comes out of the rigid arm. If you are installing the LED dental light on the back-mount rigid arm: () Remove the wrap that surrounds the halogen light wiring and tubing that comes out of the back-mount rigid arm. () Remove the wiring and tubing that comes out of the front-mount rigid arm Rev B
12 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Task 3. Remove the halogen dental light wiring from the floor box, up the lift arm and back to the rigid arm. Task 4. Lift the halogen light out of the lower post. Set the light aside Rev B
13 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Install the LED Dental Light on the Back Mount Recommended Tool /8" hex key Task. Insert and fully seat the bearing into the lower post. Task. Place the trim cover on top of the bearing. Route the wiring through the rigid arm Rev B 3
14 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Task 3. Insert the LED light into the lower post. Task 4. If the dental chair has a delivery system: Insert the water bottle mounting screw through the lower post. Route the water bottle tubing through the lower post. 3 Use a /8" hex key to secure the water bottle housing Rev B
15 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Task 5. CAUTION To prevent binding and damaging the umbilical, make sure there is a generous service loop below the upper structure. Route the dental light cable and water bottle tubing through the upper structure and lift arm to the floor box. Service Loop Next Step Continue with Connect the LED Dental Light to the Power Supply on page Rev B 5
16 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Install the LED Dental Light on the Front Mount Task. Insert and fully seat the bearing into the lower post. Task. Place the trim cover on top of the bearing. Route the wiring into the lower post and out of the slot on the bottom of the post Rev B
17 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Task 3. Insert the light into the lower post. Task 4. If the dental chair has a delivery system: Insert the water bottle mounting screw through the lower post. Route the water bottle tubing through the lower post and out of the slot on the bottom of the post. 3 Use a /8" hex key to secure the water bottle housing Rev B 7
18 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Task 5. Wiring and Tubing from Back Mount Wraps CAUTION To prevent damaging the wiring and tubing, provide a generous service loop under the pivot bolt and jam nut. Route the wiring and tubing under the upper structure to the back side of the lift arm. Starting at the slot in the lower post, install two wraps around the wiring and tubing. If there is tubing from equipment installed at the back-mount, include it in the wrap. Task 6. Use a cable tie to secure the wiring and tubing just in front of the mount bolt. CAUTION To prevent damaging the wiring and tubing, be sure to maintain the service loop when you secure the cable tie Rev B
19 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Task 7. Route the wiring and tubing down the lift arm and to the floor box Rev B 9
20 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Connect the LED Dental Light to the Power Supply Connect the 37L with Touchpad Functionality or 57L Dental Light Connections With a Delivery System Connections Without a Delivery System Peel off the protective paper from the adaptor board. Attach the adaptor board to the top of the power supply. Connect the black and gray wires as shown above. If a delivery system is installed: () Disconnect the delivery system black and gray wires from the power supply. 3 4 () Connect the supplied WAGO connectors and wires to the 0 V and 4 V terminals on the power supply. Connect the black wire to 0 V. Connect the gray wire to 4 V. (3) Connect the delivery system and light cable black wires to the WAGO connector with the black wire. (4) Connect the delivery system and light cable gray wires to the WAGO connector with the gray wire. If a delivery system in not installed: Connect the black wire to the 0 V terminal on the power supply and the light cable gray wire to the 4 V terminal. Connect the colored wires to the positions on the adaptor board as labeled; brown to BRN, red to RED, and orange to ORN. Connect a data line from the adaptor board to a port on the chair circuit board Rev B
21 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Connect the 37L without Touchpad Functionality to the Power Supply Connect the dental light power cable black wire to the 0 V terminal on the power supply and the gray wire to the 4 V terminal Rev B
22 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Prepare and Adjust the Dental Light Adjust the Dental Light Flexarm Counterbalance Recommended Tools Phillips head screwdriver 5/64" hex key /" combination wrench NOTE Complete this procedure to minimize the amount of unintentional dental light flexarm movement when adjusting the position of the light.. Remove the end cap on the flexarm.. Remove the three screws that secure the cover. 3. Remove the cover. 4. Adjust the nut on the end of the spring. If the dental light drifts up, turn the nut counterclockwise. If the dental light drifts down, turn the nut clockwise. 5. Set the cover back onto the flexarm (but do not reattach it yet). Check for drift. 6. Repeat steps 4 and 5 until drift is eliminated. 7. Reinstall the screws that secure the cover and reinstall the end cap NOTE An optional travel stop limit kit (p/n ) can be installed to limit the upward and downward motion of the flexarm Rev B
23 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Adjust the Dental Light Rigid Arm Tension Check the movement of the dental light rigid arm. If the rigid arm moves too easily, tends to drift out of position or is too difficult to move, use the following procedures to adjust the tension on the rigid arm. Front Mount Dental Light Recommended Tool 5/6" socket and ratchet Task. Place the dental light in working position. Loosen the jam nut on the pivot bolt. Pivot Bolt Jam Nut 3 4 Tighten or loosen the pivot bolt as needed. Tighten the jam nut on the pivot bolt Rev B 3
24 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Rear Mount Dental Light Recommended Tools 5/3" and /4" hex keys Task. 3 4 Remove the four screws that secure the seat upholstery to the chair. Lift the seat upholstery off the chair. Plug the chair into the mains supply. To provide access to the back mount tension adjustment, lower the back all the way down. Task. Check that the rigid arm is secured firmly in place and does not rotate easily. If necessary, tighten or loosen the bolt Rev B
25 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Task 3. On the bottom of the pivot bolt, check the jam nut. If necessary, tighten the jam nut. Jam Nut Task Raise the back. Align the four threaded inserts in the seat upholstery with the holes in the chair casting. Use four screws to secure the seat upholstery to the chair. Unplug the chair from the mains supply Rev B 5
26 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Adjust the Dental Light Rotation Tension Recommended Tool 7/64" hex key Test the rotation tension of the light head. If it needs to be adjusted, follow the directions for the type of tension that you will adjust. Adjust the Vertical Tension To adjust the tension, turn the screw. Clockwise increases the tension Rev B
27 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Adjust the Horizontal and Diagonal Tension Task. Remove the two screws securing the driver housing cover. Grasp the driver housing and use your thumbs to push the driver housing cover away from the driver housing Rev B 7
28 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Task. To adjust horizontal tension, rotate the friction adjustment. Clockwise increases the tension. To adjust diagonal tension, turn the setscrew. Clockwise increases the tension Rev B
29 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Test the Dental Light Perform the test procedure appropriate to your light: A-dec 57L Procedure A-dec 37L Procedure Test the Dental Light Using the Touchpad Reinstall the Driver Housing Cover A-dec 57L Procedure Task.. Plug the chair into the mains supply.. Turn on the light. 3. Press the mode button to test the light in each mode. 4. For each mode, verify that the correct light on the driver housing cover is illuminated. If it doesn t work properly, check the wiring connections. 3 4 Cure-Safe High Medium Low Next Step See Test the Dental Light Using the Touchpad on page Rev B 9
30 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide A-dec 37L Procedure Task.. Plug the chair into the mains supply.. 37L Dental Light with Touchpad Functionality: Press the power button several times to verify the light turns on and off. Leave the light off. 37L Dental Light without Touchpad Functionality: Press the power button repeatedly to verify the light cycles between high, composite/low, and off intensity modes. If it doesn t work properly, check the wiring connections. NOTE If you installed a dental light without touchpad functionality and you inadvertently press the dental light button on the touchpad, the indicator light will turn on. To turn off the indicator light, press and hold the dental light button Rev B
31 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Test the Dental Light Using the Touchpad To verify the light turns on and toggles between intensity modes (37L with touchpad functionality: high and composite/low; 57L: high, medium, and low, plus cure-safe mode), repeatedly press and release. To turn off the light, press and hold the button. NOTE When the 37L with touchpad functionality is in the composite/low mode or the 57L is in the cure-safe mode, the light indicator on the touchpad flashes. To disable the auto on/off feature, press and hold and (or and on the deluxe touchpad) at the same time for three seconds. One beep indicates that the auto on/off function is off. To re-enable, repeat this step. Three beeps indicate that the auto on/off feature is activated. Standard Touchpad A-dec 300 Deluxe Touchpad 3 Unplug the chair from the mains supply Rev B 3
32 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Reinstall the Driver Housing Cover Task. CAUTION When removing or replacing covers, take care not to damage any wiring. Verify that the covers are secure after replacing them. Position the driver housing cover so the keyhole fits around the post; then push the driver housing cover into position with your palm. Use two screws to secure the cover Rev B
33 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Reinstall the Covers CAUTION When removing or replacing covers, take care not to damage any wiring or tubing. Verify that the covers are secure after replacing them. Reinstall the Single Piece Floor Box Cover Slide the slots in the end of the cover down over the pins and toward the chair. Slide the slots in the end of the cover down over the pins on the floor box cover frame. Install the Stop Plate Reinstall the stop plate Rev B 33
34 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Rev B
35 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Rev B 35
36 A-dec 37L or 57L Dental Light on an A-dec Performer Dental Chair Installation Guide Regulatory Information Regulatory information mandated by agency requirements is provided in the Regulatory Information, Specifications, and Warranty document (p/n ), which is available in the Document Library at Product Models and Versions Covered in this Document Model Versions Description 37L, 57L A Dental Light Performer 8000 B Dental Chair WAGO is a registered trademark of the WAGO Corporation. Nord-Lock is a registered trademark of Nord-Lock International AB. A-dec Headquarters 60 Crestview Drive Newberg, OR 973 USA Tel: Within USA/CAN Tel: Outside USA/CAN Fax: A-dec Inc. makes no warranty of any kind with regard to the content in this document including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. ÍvÈ.Ç&]È.00kÎ Rev B Copyright 07 A-dec Inc. All rights reserved. IGgrphpor7
A-dec Dental Light on an A-dec 200 Dental Chair INSTALLATION GUIDE
A-dec 57-00 Dental Light on an A-dec 00 Dental Chair INSTALLATION GUIDE Install the Dental Light CAUTION When removing or replacing covers, take care not to damage any wiring. Verify that the covers are
A-dec Dental Light on an A-dec 200 Dental Chair I NSTALLATION GUIDE
A-dec 371-00 Dental Light on an A-dec 00 Dental Chair I NSTALLATION GUIDE Install the Dental Light 1 3 4 1. Insert and fully seat the bearing in the support center post.. Place the trim cover on top of
N4i Installation Manual. (picture of N4i screen)
N4i Installation Manual (picture of N4i screen) 1 Table of Contents N4i Computer Parts List... 4 Netpulse Stabilizer Bar Parts List... 6 Hardware List... 7 Tools Needed for Installation... 7 N4i Assembly
The Bowflex Conquest Home Gym Assembly Instructions
The Bowflex Conquest Home Gym Assembly Instructions P/N 001-6841 Rev C (04/2007) Table of Contents Before You Start... 2 Tools You Will Need / Hardware Chart... 3 Parts List... 4 Weight and Multi-carton
INSTRUCTION MANUAL LEG PRESS (NEW MODEL) OPTION OF K2 GYM
INSTRUCTION MANUAL LEG PRESS (NEW MODEL) OPTION OF K2 GYM QUESTION? As a quality home gym supplier we are committed to your complete satisfaction. If you have questions, or find missing or damaged parts,
weight.detach/bench ITEM NO: 76310
weight.detach/bench ITEM NO: 76310 OWNER S MANUAL IMPORTANT: Read all instructions carefully before using this product. Retain this owner s manual for future reference. The specifications of this product
WEIGHT SYSTEM EXERCISER User s Manual
Model No. 831.14934.0 Serial No. Write the serial number in the space above for reference. WEIGHT SYSTEM EXERCISER User s Manual Serial Number Decal Assembly Operation Maintenance Part List and Drawing
CROSS TRAINING MAGNETIC TREADMILL
CROSS TRAINING MAGNETIC TREADMILL SF-T7615 USER MANUAL IMPORTANT : Read all instructions carefully before using this product. Retain this manual for future reference. For customer service, contact support@sunnyhealthfitness.com
USER'S MANUAL QUESTIONS? CAUTION. Model No. WEEVSY Serial No. Write the serial number in the space above for reference.
Model No. WEEVSY30810.0 Serial No. Write the serial number in the space above for reference. USER'S MANUAL Serial Number Decal (under the seat) QUESTIONS? If you have questions, or if there are missing
SlideDriver 50VF. Modbus Controlled VFD Replacement Kit (MX4210, MX4211) REQUIRED TOOLS PARTS WORK SAFELY!
SlideDriver 50VF Modbus Controlled VFD Replacement Kit (MX420, MX42) The following instructions are intended to assist the user in the installation of post-202 manufactured VFDs for use on the SlideDriver
OWNER S MANUAL. BODYCRAFT 7699 Green Meadows Dr., Lewis Center, Ohio Tel:
OWNER S MANUAL BODYCRAFT 7699 Green Meadows Dr., Lewis Center, Ohio 43035 Tel: 800.990.5556 1 www.bodycraft.com SAFETY INSTRUCTION WARNING: To reduce the risk of serious injury, read the following safety
LEG PRESS ADAPTER KIT FOR GS1/GS2 GYM SYSTEM
LEG PRESS ADAPTER KIT FOR GS/GS GYM SYSTEM WARNING: Read and follow all directions for each step to insure proper assembly of this product. USER S GUIDE CLASS H PART # 780 REV. A Version: GS-LPA-0 Revision:
DELUXE HOME GYM HG Model HG Retain This Manual for Reference OWNER'S MANUAL
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Important Assembly Information DELUXE HOME GYM HG 8250 Care and Maintenance Parts List Warranty Ordering
SelectTech 3.1 Bench Assembly / Owner s Manual
SelectTech 3.1 Bench Assembly / Owner s Manual This product is compliant with the applicable CE requirements. Congratulations on your commitment to fitness and your purchase of the Bowflex SelectTech 3.1
TWISTING STAIR STEPPER WITH BANDS
TWISTING STAIR STEPPER WITH BANDS NO. 068 USER MANUAL IMPORTANT! Please retain owner s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN
TORNADO AIR BIKE SF-B2706 USER MANUAL
TORNADO AIR BIKE SF-B2706 USER MANUAL IMPORTANT! Read all instructions carefully before using this product. Retain owner s manual for future reference. For customer service, please contact: support@sunnyhealthfitness.com
SC916 StairClimber. Assembly Manual PN A. Nautilus Bowflex Schwinn Fitness StairMaster Universal Nautilus Institute
SC916 StairClimber Nautilus Bowflex Schwinn Fitness StairMaster Universal Nautilus Institute PN 001-7201-040208A Table of Contents Model SC916 Specifications...2 Safety Warnings...3 Safety Warning Labels...4
Bowflex Home Gym- PR1000
Bowflex Home Gym- PR1000 Prepared for Bowflex Prepared by Christine Pfeiffer April 29, 2013 Table of Contents Table of Contents... iii Introduction... 1 Warnings/Preparation Before Assembly... 3 Basic
The Bowflex Xceed Plus Home Gym Assembly Manual
The Bowflex Xceed Plus Home Gym Assembly Manual P/N 001-6907 Rev. D (06/12/2007) Congratulations on your commitment to fitness and your purchase of the Bowflex Xceed Plus home gym. Before assembling your
Owner s Manual & Exercise Guide
Owner s Manual & Exercise Guide Distributed by: Thane International, Inc., La Quinta, CA 92253 Thane Direct Canada, Inc., Toronto, ON. Thane Direct UK Ltd., Admail 68, PL1 1AD w w w. t h a n e. c o m Copyright
IMPORTANT: Please read and follow all instructions thoroughly before using your AB SHREDDER. Maximum user weight is 100 KG. KEEP BODY PARTS, HANDS AND FEET AWAY FROM THE SEAT, WHEELS AND THE CURVED TRACK
TWISTING STAIR STEPPER WITH BANDS NO. 068 USER MANUAL
TWISTING STAIR STEPPER WITH BANDS NO. 068 USER MANUAL IMPORTANT: Read all instructions carefully before using this product. Retain owner s manual for future reference. For customer service, please contact:
IC031 Magnetic Belt Drive Performance Indoor Cycle Bike
IC031 Magnetic Belt Drive Performance Indoor Cycle Bike USER MANUAL IMPORTANT: Read all instructions carefully before using this product. Retain owner s manual for future reference. For customer service,
USER S MANUAL QUESTIONS? CAUTION. Visit our website at.
Model No. NTCCBE950 Serial No. Write the serial number in the space above for future reference. USER S MANUAL Serial Number Decal (under seat) QUESTIONS? As a manufacturer, we are committed to providing
Programmable 998 Programmable Upright Bike (PC)
Programmable 998 Programmable Upright Bike (PC) ITEM NO: 998 OWNER S MANUAL IMPORTANT: Read all instructions carefully before using this product. Retain this owner s manual for future reference. The specifications
SUNNY MAGNETIC EXERCISE BIKE
SUNNY MAGNETIC EXERCISE BIKE SF-B910 IMPORTANT! Please read the manual carefully before assembling and using the bike. For Customer Service, please contact: support@sunnyhealthfitness.com IMPORTANT SAFETY
TWIST STEPPER NO. 045
TWIST STEPPER NO. 045 IMPORTANT: Read all instructions carefully before using this product. Retain owner s manual for future reference. For customer service, please contact: support@sunnyhealthfitness.com
OWNER S MANUAL MODEL: ACH0011
OWNER S MANUAL MODEL: ACH0011 Table of Contents Page Exploded View Part List Important Safety Information Before You Start Assembly Instruction 3 4 5 6 7 Console 11 Monitoring Heartrate 12 Warranty / Service
BH Fitness T4 / T6 SPORT Treadmill Owner s Manual
BH Fitness T4 / T6 SPORT Treadmill Owner s Manual BEFORE YOU BEGIN It is very important to become familiar with the frequently used components of your treadmill. Computer Console Circuit Breaker ON/OFF
CONTENTS. page 2. page 2. page 3. page 4. page 5-7. page page 12 PRECAUTIONS OPERATING INSTRUCTION EXPLODED DRAWING PARTS LIST
CONTENTS PRECAUTIONS OPERATING INSTRUCTION EXPLODED DRAWING PARTS LIST ASSEMBLY INSTRUCTIONS MONITOR INSTRUCTION MANUAL WARRANTY INFORMATION page 2 page 2 page 3 page 4 page 5-7 page 8-11 page 12 1 PRECAUTIONS
A m e r i c a s D e n t a l E q u i p m e n t C o m p a n y. Rev 2/15. D a n s e r e a u
A m e r i c a s D e n t a l E q u i p m e n t C o m p a n y Rev 2/15 D a n s e r e a u (8 0 0 )423-5657 / WWW.DHPDENTAL.COM DANSEREAU HEALTH PRO DUCTS, INC. AM ERIC A S DENT AL EQU I PMENT COMPAN Y Dansereau
Sunny Magnetic Exercise SF-B910
Sunny Magnetic Exercise SF-B910 Bike IMPORTANT: PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE BIKE For Customer Service, please contact: support@sunnyhealthfitness.com Important Safety Information
AIR WALKER TRAINER USER MANUAL SF-E902
AIR WALKER TRAINER USER MANUAL SF-E902 IMPORTANT: Read all of the instructions carefully before using this product. Retain the owner s manual for future reference. For customer service, please contact:
6-8 Assembly Instructions 8 Maintenance and Treatment 9-10 Warm Up Exercises
Table of Contents 2 Precautions 3 Operation Instruction 4 Parts List 5 Overview Drawing / Hardware Packing List 6-8 Assembly Instructions 8 Maintenance and Treatment 9-10 Warm Up Exercises 1. Precautions
Owners manual. HTR 1.0 Exercise Bike. T +31 (0) E W ENG. Fitness Benelux
HTR 1.0 Exercise Bike Owners manual Fitness Benelux Uw partner in fitness T +31 (0)74-7600219 E service@fitnessbenelux.nl W www.fitnessbenelux.nl INDEX Safety instruction 3 Assembly instruction 4-9 Exploded
USER S MANUAL QUESTIONS? CAUTION. For a great selection of new CD and MP3 workouts. Visit our website at. or call
Model No. RBBE950 Serial No. Write the serial number in the space above for future reference. USER S MANUAL Serial Number Decal (Under Seat) QUESTIONS? As a manufacturer, we are committed to providing
MARCY DIAMOND ELITE UTILITY BENCH MD-440. Model MD-440. Retain This Manual for Reference OWNER'S MANUAL
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Identifier MARCY DIAMOND ELITE UTILITY BENCH MD-440 Assembly Instruction Parts List Warranty
MAGNETIC ELLIPTICAL TRAINER SF-E905 USER MANUAL
MAGNETIC ELLIPTICAL TRAINER SF-E905 USER MANUAL IMPORTANT! Read all instructions carefully before using this product. Retain owner s manual for future reference. For customer service, please contact: support@sunnyhealthfitness.com
FITNESS #1 HOME
TROJAN MY SPACE MY TIME CAUTION READ ALL PRECAUTIONS AND INSTRUCTIONS IN THIS MANUAL BEFORE USING THIS EQUIPMENT. KEEP THIS MANUAL FOR FUTURE REFERENCE WARRANTY 0861 876526 0861 TROJAN #1 HOME SOUTH AFRICA
USER S MANUAL CAUTION ACTIVATE YOUR WARRANTY CUSTOMER CARE. Model No. GGSY Serial No.
www.workoutwarehouse.com Model No. GGSY24613.0 Serial No. Write the serial number in the space above for reference. USER S MANUAL Serial Number Decal (under the seat) ACTIVATE YOUR WARRANTY To register
Motorised Treadmill Model No: JI1625
BODYWORX Motorised Treadmill Model No: JI1625 Retain this owner s manual for future reference Read and follow all instructions in this owner s manual Version A 1 TABLE OF CONTENTS OVERVIEW DRAWING 2 ASSEMBLY
CIRCUIT ZONE ELLIPTICAL
CIRCUIT ZONE ELLIPTICAL SF-E386 USER MANUAL IMPORTANT! Please retain owner s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU
Thank you for purchasing the AB COASTER. Our customer service staff is ready to help and to answer any questions.
Thank you for purchasing the AB COASTER. Our customer service staff is ready to help and to answer any questions. Our phone number is: 908-879-2713 The Ab Coaster Company, 173 Route 206, P.O. Box 9 Chester,
SPG-200 SPIN BIKE OWNER S MANUAL
SPIN BIKE OWNER S MANUAL Product may vary slightly from the item pictured due to model upgrades Read all instructions carefully before using this product. Retain this owner s manual for future reference.
SAFETY LABELS CAUTION: PINCH POINT. Make sure locking pin is fully engaged before beginning forward and side lift exercises.
CONTENTS 3 Important Safety Information 4 Assembly Instructions 6 Adjusting the Seat 6 Getting On and Off the Ab Coaster Pro 7 Ab Coaster Pro Exercises a. Forward Lift b. Side Lift (Obliques) c. Free-Style
USER MANUAL CAUTION. MADE IN CHINA 2015 Body Action Enterprise Co., Ltd. All rights reserved.
USER MANUAL CAUTION MADE IN CHINA 05 Body Action Enterprise Co., Ltd. All rights reserved. READ ALL PRECAUTIONS AND INSTRUCTIONS IN THIS MANUAL BEFORE USING THIS EQUIPMENT AND KEEP THIS FOR FUTURE REFERENCE
Owner s Manual. Model# IMPORTANT: Read all instructions carefully before using this product. Retain this owner s manual for future reference.
Swing Stepper Owner s Manual Model#91306 IMPORTANT: Read all instructions carefully before using this product. Retain this owner s manual for future reference. The specifications of this product may vary
ROWER-442 ROWING MACHINE OWNER S MANUAL
ROWING MACHINE OWNER S MANUAL Product may vary slightly from the item pictured due to model upgrades Read all instructions carefully before using this product. Retain this owner s manual for future reference.
MODEL# , Feb.
INVERSION TABLE with Memory Foam OWNER S MANUAL MODEL#75164 2011, Feb. CAUTION: Weight on this product should not exceed 160kgs (350lbs). CAUTION: Exercise of a strenuous nature, as is customarily done
USER'S MANUAL QUESTIONS?
Model No. WL000 QUESTIONS? USER'S MANUAL As a manufacturer, we are committed to providing complete customer satisfaction. If you have questions or find that there are missing or damaged parts, we will
Thank you for purchasing the AB COASTER. Our customer service staff is ready to help and to answer any questions.
Thank you for purchasing the AB COASTER. Our customer service staff is ready to help and to answer any questions. Our phone number is: 908-879-2713 The Ab Coaster Company, 173 Route 206, P.O. Box 9 Chester,
SelectTech 4.1 Bench Assembly / Owner s Manual
SelectTech 4.1 Bench Assembly / Owner s Manual This product is compliant with the applicable CE requirements. Table of Contents Important Safety Instructions...3 Safety Warning Labels and Serial Number...4
WEIGHT BENCH EXERCISER User s Manual
Model No. 81.19.0 Serial No. Write the serial number in the space above for reference. WEIGHT BENCH EXERCISER User s Manual Serial Number Decal Assembly Operation Maintenance Part List and Drawing Sears,
OWNER S MANUAL MODEL#75165
INVERSION TABLE with Memory Foam OWNER S MANUAL MODEL#75165 2011, July CAUTION: Weight on this product should not exceed 136kgs (300lbs). CAUTION: Exercise of a strenuous nature, as is customarily done
IMPORTANT SAFETY NOTICE:
Dear Customer, Please read this instruction very carefully before using this item. You will find important information regarding safety of your magnetic bike. IMPORTANT SAFETY NOTICE: Note the following
USER'S MANUAL QUESTIONS? CAUTION. Model No. WETL Serial No. Write the serial number in the space above for reference. Serial Number Decal
Model No. WETL20709.0 Serial No. Write the serial number in the space above for reference. USER'S MANUAL Serial Number Decal QUESTIONS? If you have questions, or if there are missing parts, please contact
WEIGHT BENCH EXERCISER User s Manual
Model No. 81.15962.0 Serial No. Write the serial number in the space above for reference. WEIGHT BENCH EXERCISER User s Manual Serial Number Decal Assembly Operation Maintenance Part List and Drawing Sears,
SelectTech 4.1 Bench. Assembly Manual
SelectTech 4.1 Bench Assembly Manual Table of Contents Important Safety Instructions...3 Safety Warning Labels and Serial Number...4 Specifications...5 Before Assembly...5 Parts...6 Hardware...7 Tools...7
841T. Adventure4 Adventure5 TREADMILL OWNER S MANUAL
841T Adventure4 Adventure5 TREADMILL OWNER S MANUAL Read the treadmill guide before using this owner s manual. ASSEMBLY WARNING There are several areas during the assembly process that special attention
ULTR A SERIES G7-S51
ULTR A SERIES G7-S51 PROPER USAGE 1. Do not exceed weight limits of the exercise device.. If applicable, set safety stops to appropriate height. 3. If applicable, adjust seat pads, leg pads, foot pads,
ULTR A SERIES G7-S23
ULTR A SERIES G7-S3 PROPER USAGE 1. Do not exceed weight limits of the exercise device.. If applicable, set safety stops to appropriate height. 3. If applicable, adjust seat pads, leg pads, foot pads,
OWNER S MANUAL. Gravity Model 5402
OWNER S MANUAL Gravity 4000 Model 5402 The specifications of this product may vary from this photo and are subject to change without notice. IRONMAN, IRONMAN TRIATHLON and M-DOT are registeved trademarks
MAGNETIC ELLIPTICAL TRAINER SF-E3608 USER MANUAL
MAGNETIC ELLIPTICAL TRAINER SF-E3608 USER MANUAL WARNING! Your elliptical trainer is not designed for reverse pedaling. Failure to comply with this warning may result in permanent damage to your new equipment.
Magnet Power, Recumbent Bike OWNER S MANUAL R23500-C
Magnet Power, Recumbent Bike OWNER S MANUAL R23500-C Table of Contents 2 Precautions 3 Operating Instruction 4 Parts List 5 Overview Drawing 6 Hardware Packing List 6 Assembly Instructions 9 Adjustment
R25 Recumbent Bike ASSEMBLY & PARTS MANUAL
V2 R25 Recumbent Bike ASSEMBLY & PARTS MANUAL MA902 Recreation Supply Inc. Model No. R25 V2 P.O. BOX 181 BODYCRAFT is a division of Recreation Supply Sunbury, OH 43074 www.bodycraft.com 800-990-5556 info@bodycraft.com
ULTR A SERIES G7-S13
ULTR A SERIES G7-S13 PROPER USAGE 1. Do not exceed weight limits of the exercise device.. If applicable, set safety stops to appropriate height. 3. If applicable, adjust seat pads, leg pads, foot pads,
BH Fitness T8 SPORT Treadmill Owner s Manual
BH Fitness T8 SPORT Treadmill Owner s Manual BEFORE YOU BEGIN It is very important to become familiar with the frequently used components of your treadmill. User Safety: SECTION 1 IMPORTANT SAFETY INSTRUCTIONS
IGS-02 CALF RAISE BENCH. Model IGS-02. Retain This Manual for Reference OWNER'S MANUAL
NOTE: Please read all instructions carefully before using this product Safety Notice Hardware Identifier Assembly Instruction IGS-02 CALF RAISE BENCH Exploded Diagram Parts List Warranty Ordering Parts
Bio Mechanical Hoof Tester Operator s Manual
Bio Mechanical Hoof Tester Operator s Manual Introduction: To inform the user, this manual will begin with a set of reference figures outlining the components of the Bio Mechanical Hoof Tester. The manual
Important Safety Information
Important Safety Information We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. Please read the information below carefully before using this
X-plode MULTI-PURPOSE WEIGHT LIFTING BENCH
X-plode MULTI-PURPOSE WEIGHT LIFTING BENCH by Progression Fitness Table of Contents ATTENTION: Read all precautions and instructions in this manual before using this equipment Safety precautions--------------------------------------------------------
USER'S MANUAL ORDERING REPLACEMENT PARTS QUESTIONS?
ORDERING REPLACEMENT PARTS If you encounter any difficulties or problems with this product, contact the ICON Fitness Lifestyle Ltd. office, or write: ICON Fitness Lifestyle Ltd. Greenwich House 223 North
USER MANUAL - EN. IN 5729 Exercise Bike insportline Xbike
USER MANUAL - EN IN 579 Exercise Bike insportline Xbike CONTENT IMPORTANT SAFETY PRECAUTIONS... 3 CHECK LIST (CONTACT PACKAGE)... 4 VIEW... 6 ASSEMBLY INSTRUCTION... 6 EXPLODED VIEW... 0 PARTS LIST...
Assembling and Maintaining the StretchTrainer
Assembling and Maintaining the StretchTrainer Edition Information ASSEMBLING AND MAINTAINING THE STRETCHTRAINER P/N 38875-112 rev B Copyright August 2014 Precor Incorporated. All rights reserved. Specifications
Active Imaging TM transducers: Active Imaging 3-IN-1 Active Imaging SideScan
Active Imaging TM transducers: Active Imaging 3-IN-1 Active Imaging SideScan Installation manual ENGLISH www.simrad-yachting.com www.lowrance.com 1 Preface Warning: It is your sole responsibility to install
USER MANUAL EN IN 6447 Climber For Home Use insportline SM-3276
USER MANUAL EN IN 6447 Climber For Home Use insportline SM-3276 Product May Vary Slightly From Picture MADE IN TAIWAN CONTENTS SAFETY INSTRUCTION... 3 ASSEMBLY PARTS... 4 HARDWARE IDENTIFICATION CHART...
Table of Contents. Product Safety Part Drawing & Contents Hardware & Tools Assembly Adjustment
Ver.1 Table of Contents Product Safety.. 01. Part Drawing & Contents..... 02. Hardware & Tools.. 03. Assembly... 04. Adjustment... 10. Trouble Shooting & Maintenance.. 11. Computer... 12. Warm Up... 19.
MANUAL WALKING TREADMILL SF-T1408M USER MANUAL
MANUAL WALKING TREADMILL SF-T1408M USER MANUAL IMPORTANT: Please read this manual carefully before using the product. Retain owner s manual for future reference. For Customer Service, please contact: support@sunnyhealthfitness.com
Valencia Pedicle Screw Surgical Technique
Valencia Pedicle Screw Surgical Technique VALENCIA CIRCUIT TABLE OF CONTENTS Design Rationale Indications for Use Surgical Technique 1. Pedicle Preparation 2. Screw Insertion 3. Rod Placement 4. Locking
Manual. HTR 2.0 Ergometer Hometrainer. T +31 (0) e w
HTR 2.0 Ergometer Hometrainer Manual For questions or missing parts please contact Fitness Benelux: Fitness Benelux Uw partner in fitness twekkelerweg 263 7553 lz Hengelo the netherlands T +31 (0)74-7600219
MAGNETIC ELLIPTICAL TRAINER SF-E3608 USER MANUAL
MAGNETIC ELLIPTICAL TRAINER SF-E3608 USER MANUAL WARNING! Your elliptical trainer is not designed for reverse pedaling. Failure to comply with this warning may result in permanent damage to your new equipment.
E. SelectTech 5.1 Bench Owner s / Assembly Manual
000-6189.080118.E SelectTech 5.1 Bench Owner s / Assembly Manual Congratulations on your commitment to fitness and your purchase of the Bowflex SelectTech 5.1 Bench. Before assembling your Bowflex SelectTech
Welch Allyn Connex Vital Signs Monitor 6000 Power Supply Replacement
Welch Allyn Connex Vital Signs Monitor 6000 Power Supply Replacement Replace the power supply in a 6000 series Welch Allyn Connex Vital Signs Monitor. Geschrieben von: Sam Lionheart ifixit CC BY-NC-SA
Analog Selector Instructions
M Panadent Corporation 580 S. Rancho Avenue Colton, California 92324, USA Tel: (909) 783-1841 USA & Canada (800) 368-9777 Analog Selector Instructions Raise and lock incisal pin (arrow) at least 5mm above
MARCY Magnetic-Resistance Upright Bike
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Pack Assembly Instruction Parts List Warranty MARCY Magnetic-Resistance Upright Bike ME-708
WEIGHT BENCH EXERCISER User s Manual
Model No. 831.15964.1 Serial No. Write the serial number in the space above for reference. WEIGHT BENCH EXERCISER User s Manual Serial Number Decal (under frame) Assembly Operation Maintenance Part List
SF-T4400 TREADMILL USER MANUAL
SF-T4400 TREADMILL USER MANUAL IMPORTANT: Read all instructions carefully before using this product. Retain owner s manual for future reference. For customer service, please contact: support@sunnyhealthfitness.com
Aerobic Lateral Trainer
Aerobic Lateral Trainer Assembly Manual HLT2500 IMPORTANT SAFETY INFORMATION READ ALL INSTRUCTIONS BEFORE USING THIS OWNER S MANUAL CONTAINS ASSEMBLY, OPERATION, MAINTENANCE AND SAFETY INFORMATION. IN
The specifications of this product may vary from this photo and are subject to change without notice. For Customer Service, please contact:
Elliptical Bike SF-E1114 The specifications of this product may vary from this photo and are subject to change without notice. For Customer Service, please contact: support@sunnyhealthfitness.com. Important
BIKE EXERCISER User s Manual
Model No. 831.21952.3 Serial No. Write the serial number in the space above for reference. BIKE EXERCISER User s Manual Serial Number Decal (under frame) Assembly Operation Maintenance Part List and Drawing
USER S MANUAL QUESTIONS? CAUTION. Visit our website at Model No. PFEVEL33020 Serial No. Serial Number Decal
Model No. PFEVEL020 Serial No. USER S MANUAL Serial Number Decal QUESTIONS? As a manufacturer, we are committed to providing complete customer satisfaction. If you have questions, or if there are missing
SelectTech 3.1 Bench Assembly / Owner s Manual
SelectTech 3.1 Bench Assembly / Owner s Manual Congratulations on your commitment to fitness and your purchase of the Bowflex SelectTech 3.1 Bench. Before assembling your Bowflex SelectTech 3.1 Bench please
Articulator Instructions
M Panadent Corporation 580 S. Rancho Avenue Colton, California 92324, USA Tel: (909) 783-1841 USA & Canada (800) 368-9777 Raise and lock incisal pin and support pin (arrow) at least 5mm above incisal table.
IMPORTANT INFORMATION - PLEASE READ. Table of Contents. Introduction. General Information
IMPORTANT INFORMATION - PLEASE READ Introduction Congratulations! Welcome to the world of the ELLIPTICAL CROSS TRAINER. The ELLIPTICAL CROSS TRAINER is one of the finest and most comprehensive pieces of
Exercise can present a health risk. Consult a physician before beginning any exercise program with this equipment.
OWNER S MANUAL Product may vary slightly from picture MADE IN TAIWAN Exercise can present a health risk. Consult a physician before beginning any exercise program with this equipment. If you feel faint
R3 & C3 Exercise Bikes Owners Manual Version 1.3
R3 & C3 Exercise Bikes Owners Manual Version 1.3 page Welcome to LifeSpan............................ 1 Specifications................................. 3 Limited Home Use Warranty.......................
TR1120 OWNER S MANUAL
TR1120 OWNER S MANUAL IMPORTANT: For maximum effectiveness and safety, please read this owner s manual before using your BodyCraft treadmill. Retain this owner s manual for future reference. 1. It is the