DATE IN: JUL 27, 2016 REPORT NUMBER: DATE OUT: AUG 02, 2016 PAGE: 1 of 11

Transcription

1 DATE OUT: AUG 02, 2016 PAGE: 1 of 11 Applicant: Hundred Power Industries Limited OVERALL RATING Contact: Sophia Zeng No.13 Futai South Road, Ping Xi Community, Address: Ping Xi Street, Ping Di Town, Longgang District, Shenzhen, China TEL : -- FAX: -- sophia@handredpower.com Copy To: -- FAIL -- X Sample Information Product Description: LIGHT UP NEWTONS CRADLE WITH MIRROR Item Number: GT-623 Purchase Order Number: -- No. of Sample Submitted: -- Country of Origin: China Country of Destination: -- Buyer: -- Manufacturer: -- Testing Status Pre- Production Production Pre- Test Retest Previous Report No.: For and on behalf of Modern Testing Services (Dongguan) Limited HO Kuen Chun, James Manager, Art and Craft Division

2 DATE OUT: AUG 02, 2016 PAGE: 2 of 11 Test Result Summary Test Requested Physical and Mechanical Requirements (ASTM F Standard Consumer Safety Specification for Toy Safety) Federal Hazardous Substances Act Regulations, 16 CFR (c)(6)(vi) Flammable Solid EN71 Part 1: 2014, Safety of toys Part 1: Mechanical and Physical Properties EN71 Part 2: A1: 2014, Safety of toys Part 2: Flammability Total Lead Content U.S. Consumer Product Safety Improvement Act of 2008 (CPSIA), Title I, Section 101 Soluble Heavy Metals Content in Similar Surface Coating Materials and Toys Substrate Materials ASTM F Section (2) & (2)(b) Phthalates Content U.S. Consumer Product Safety Improvement Act of 2008 (CPSIA), Title I, Section 108 Migration of Certain Elements EN 71-3:2013+A1:2014 Result TEST RESULTS: 1. Physical and Mechanical Requirements (ASTM F Standard Consumer Safety Specification for Toy Safety) AGE GRADE EVALUATION: Client requested age grade: Ages 8 and up Labeled age grade: Not Declared Appropriate age grade: Not Applicable Age grade for testing: Ages 8 and up SUBCLAUSE REQUIREMENT RESULT 4.1 Material Quality P Stuffing materials visual NA 4.4 Electrical/Thermal Energy 120V NA 4.5 Sound Producing Toys NA 4.6 Small Objects NA 4.7 Accessible Edges NA 4.8 Projections NA 4.9 Accessible Points NA 4.10 Wires or rods NA 4.11 Nails and Fasteners P 4.12 Plastic Film NA

3 DATE OUT: AUG 02, 2016 PAGE: 3 of Folding Mechanisms and Hinges NA 4.14 Cords and Elastics in Toys NA 4.15 Stability and Over-Load Requirements NA 4.16 Confined Spaces NA 4.17 Wheels, Tires, and Axles NA 4.18 Holes, Clearance, and Accessibility of Mechanisms NA 4.19 Simulated Protective Devices NA 4.20 Pacifiers NA 4.21 Projectile Toys NA 4.22 Teethers and Teething Toys NA 4.23 Rattles NA 4.24 Squeeze Toys NA 4.25 Battery-Operated Toys P 4.26 Toys Intended to be Attached to a Crib or Playpen NA 4.27 Stuffed and Beanbag Type Toys NA 4.28 Stroller and Carriage Toys NA 4.30 Toy Gun Marking NA 4.31 Balloons NA 4.32 Certain Toys with Nearly Spherical Ends NA 4.33 Marbles NA 4.34 Balls NA 4.35 Pompoms NA 4.36 Hemispheric Shaped Objects NA 4.37 Yo Yo Elastic Tether Toys NA 4.38 Magnets NA 4.39 Jaw Entrapment in Handles and Steering Wheels NA 5.3 Safety labeling Requirements NA 5.4 Aquatic Toys NA 5.5 Crib and Playpen Toys NA 5.6 Mobiles NA 5.7 Stroller and Carriage Toys NA 5.8 Toys Intended to be Assembled by an Adult NA 5.9 Simulated Protective Devices NA 5.10 Toys with Functional Sharp Edges or Points NA 5.11 Small Objects, Small Balls, Marbles, and Balloons NA 5.12 Toys Caps NA

4 DATE OUT: AUG 02, 2016 PAGE: 4 of Art Materials NA 5.15 Battery Operated Toys NA 5.16 Promotional Materials P 5.17 Magnets NA 6.1 Instructional Literature - Definition and Description P 6.2 Crib and Playpen Toys NA 6.3 Mobiles NA 6.4 Toy intended to be Assembled by an Adult NA to Battery Operated Toys NA 6.6 Toys in Contact with Food NA 7.1 Producer s Markings P 7.2 Battery-Powered Ride-On Toys NA 2. Federal Hazardous Substances Act Regulations, 16 CFR (c)(6)(vi) Flammable Solid TEST METHOD REQUIREMENT RESULT 16 CFR Flammable solid ASTM F Annex A5 Notes: Burnt rate shall be 0.1 inch / sec P P = Pass F = Fail NA = Not applicable NR = Not requested 3. EN71 Part 1:2014, Safety of toys Part 1: Mechanical and Physical Properties AGE GRADE EVALUATION: Client requested age grade: Age 8 and up Labeled age grade: Not Declared Appropriate age grade: Not Applicable Age grade for testing: Age 8 and up SUBCLAUSE REQUIREMENT RESULT 4 GENERAL REQUIREMENTS P 4.1 Material cleanliness P 4.2 Assembly NA 4.3 Flexible plastic sheeting NA 4.4 Toy Bags NA 4.5 Glass P 4.6 Expanding materials NA 4.7 Edges P 4.8 Points and metallic wires P

5 DATE OUT: AUG 02, 2016 PAGE: 5 of Protruding parts NA 4.10 Parts moving against each other NA 4.11 Mouth actuated toys and other toys intended to be put in the mouth NA 4.12 Balloons NA 4.13 Cords of toy kites and other flying toys NA 4.14 Enclosures NA 4.15 Toys intended to bear the mass of a child NA 4.16 Heavy immobile toys NA 4.17 Projectiles NA 4.18 Aquatic toys and inflatable toys NA 4.19 Percussion caps specifically designed for use in toys and toys using percussion caps NA 4.20 Acoustics NA 4.21 Toys containing a non-electrical heat source NA 4.22 Small balls NA 4.23 Magnets NA 4.24 Yo-yo balls NA 4.25 Toys attached to food NA 5 TOYS INTENDED FOR CHILDREN UNDER 36 MONTHS NA 5.1 General requirements NA 5.2 Soft-filled toys and soft-filled parts of a toy NA 5.3 Plastic sheeting NA 5.4 Cords, chains and electrical cables in toys NA 5.5 Liquid-filled toys NA 5.6 Speed limitation of electrically-driven ride-on toys NA 5.7 Glass and porcelain NA 5.8 Shape and size of certain toys NA 5.9 Toys comprising monofilament fibres NA 5.10 Small balls NA 5.11 Play figures NA 5.12 Hemispheric-shaped toys NA 5.13 Suction cups NA 5.14 Straps intended to be worn fully or partially around the neck NA 6 PACKAGING NA 7 WARNING AND INSTRUCTION FOR USE See Note 7.1 General. P 7.2 Toys not intended for children under 36 months NA 7.3 Latex balloons NA 7.4 Aquatic toys NA 7.5 Functional toys NA

6 DATE OUT: AUG 02, 2016 PAGE: 6 of Hazardous sharp functional edges and points NA 7.7 Projectiles NA 7.8 Imitation protective masks and helmets NA 7.9 Toy kites NA 7.10 Roller skates, inline skates, skateboards and certain other ride-on toys NA 7.11 Toys intended to be attached to or strung across a cradle, cot, or perambulator 7.12 Liquid-filled teethers NA 7.13 Percussion caps specifically designed for use in toys NA 7.14 Acoustics NA 7.15 Toy bicycles NA 7.16 Toys intended to bear the mass of a child NA 7.17 Toys comprising monofilament fibres NA 7.18 Toy Scooters NA 7.19 Rocking horse and similar toys NA 7.20 Magnetic/electrical experimental sets NA 7.21 Toys with electrical cables exceeding 300mm in length NA 7.22 Toys with cords or chains intended for children of 18 months and over but under 36 months Note to Clause 7: The manufacturers obligations set out in the text of the note in EN71-1:2011 Clause 7 is for information only and the indents do not constitute requirements of this European Standard. The information is not exhaustive and Directive 2009/48/EC and the associated guidance documents should be consulted for further details. - The manufacturer s and importer s name, registered trade name or registered trade mark and the address at which the manufacturer can be contacted must be indicated on the toy or, where that is not possible, on its packaging or in a document accompanying the toy. - Manufacturers must ensure that their toys bear a type, batch, serial or model number or other element allowing their identification, or where the size or nature of the toy does not allow it, that the required information is provided on the packaging or in a document accompanying the toy. - Manufacturers and importers must ensure that the toy is accompanied by instructions and safety information in a language or languages easily understood by consumers, as determined by the Member State concerned. NA NA 4. EN71 Part 2: A1: 2014, Safety of toys Part 2: Flammability SUBCLAUSE REQUIREMENT RESULT 4 REQUIREMENTS P 4.1 General P 4.2 Toys to be worn on the head NA 4.3 Toy disguise costumes and toys intended to be worn by child in play NA 4.4 Toys intended to be entered by a child NA 4.5 Soft-filled toys NA Note: P = Pass F = Fail NA = Not Applicable NR = Not Request

7 DATE OUT: AUG 02, 2016 PAGE: 7 of 11 COMPONENT BREAKDOWN LIST: Test Item Component Description 1 White coating ( On switch ) 2 Black coating ( On back of mirror ) 3 Black plastic ( Frame / Switch / Base) 4 Black foam ( Holder on bottom of base ) 5 Transparent plastic ( Base of light ) 6 Transparent glass ( Excluding coating )( Mirror ) 7 Transparent glass ( Light ) 8 Black metal ( Screw on base ) 9 Red wire 10 Copper wire 11 White plastic with green printing and silvery plate ( PCB ) 5. Total Lead Content U.S. Consumer Product Safety Improvement Act of 2008 (CPSIA), Title I, Section 101 Test Item Accessibility (Remark 1) Accessible as received Accessible as received Accessible as received Accessible as received Accessible as received Classification Total Lead (Pb) (ppm) Result Limit Conclusion Paint or similar surface coating <10 90 Accessible substrate < Accessible substrate < Accessible substrate < Accessible substrate < Method: 1) Lead in paint and other similar surface coatings: The test is conducted according to the US CPSC Standard Operating Procedure for Determining Lead (Pb) in Paint and Other Similar Surface Coatings, April 26, 2009 (CPSC-CH-E ) 2) Lead in metals: The test is conducted according to the US CPSC Standard Operating Procedure for Determining Total Lead (Pb) in Children s Metal Products (Including Children s Metal Jewelry), December 4, 2008 (CPSC-CH-E ) 3) Lead in other non-metal materials including plastics, glass and leather material: The test is conducted according to the US CPSC Standard Operating Procedure for Determining Total Lead (Pb) in Non-Metal Children s Products, February 1, 2009 (CPSC-CH-E ) Remark: 1) The accessibility of the submitted sample after use and abuse isverified according to 16 CFR to (h). 2) Test is performed on the specified item(s) that is / are excluded from the material listed under 16 CFR (d) as per client s declaration. Note: ppm = part per million = mg/kg (milligram per kilogram) < = less than

8 DATE OUT: AUG 02, 2016 PAGE: 8 of Soluble Heavy Metals Content in Similar Surface Coating Materials and Toys Substrate Materials ASTM F Section (2) & (2)(b) Test Mass of Trace Result Soluble Heavy Metals (mg/kg) Item Amount (mg) Sb As Ba Cd Cr Pb Hg Se Conclusion <10 <10 32 <10 <10 <10 <10 < <10 <10 <10 <10 <10 <10 <10 <10 3 NA <10 <10 <10 <10 <10 <10 <10 < <10 <10 27 <10 <10 <10 <10 <10 5 NA <10 <10 27 <10 <10 <10 <10 <10 11 NA <10 <10 <10 <10 <10 <10 <10 <10 Limit for Surface Coatings and Substrates Other Than Modeling Clay Limit for Modeling Clays Sb = Antimony, As = Arsenic, Ba = Barium, Cd = Cadmium, Cr = Chromium, Pb = Lead, Hg = Mercury, Se = Selenium Method: ASTM F Section (surface coatings) / ASTM F Section (substrate material). The heavy metals content was determined by Inductively Coupled Argon Plasma Spectrometer / Inductively Coupled Plasma Mass Spectrometer. Remark: 1. All the reported results are adjusted analytical results with the analytical correction shown in the following table. Element Sb As Ba Cd Cr Pb Hg Se Analytical correction (%) The received sample(s) contained component(s) of less than 10mg on one single sample, therefore such component(s) was not tested for soluble heavy metals content as specified in clause (2) / (2) of this standard. 3. The accessibility of the submitted sample is verified according to ASTM F before and after abuse. 4. The material type of tested component(s) is / are classified as below per clause 8.3 of this standard. Material Type Classification Paint and other similar surface-coating materials 1-2 Test Item Polymeric and similar materials 3-5,11 Note: mg/kg = milligram per kilogram mg = milligram < = less than NA = Not applicable

9 DATE OUT: AUG 02, 2016 PAGE: 9 of Phthalates Content U.S. Consumer Product Safety Improvement Act of 2008 (CPSIA), Title I, Section 108 Result(%) (Remark) Test Item Part A Part B Conclusion DBP BBP DEHP DNOP DIDP DINP 1+2 <0.005 <0.005 <0.005 <0.005 <0.005 < <0.005 <0.005 <0.005 <0.005 <0.005 < <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 Limit List of Phthalates: Chemical Name CAS No. Chemical Name CAS No. Dibutyl phthalate (DBP) Di-n-octyl phthalate (DNOP) Butyl benzyl phthalate (BBP) Di-iso-decyl phthalate (DIDP) Di-2-ethylhexyl phthalate (DEHP) Di-iso-nonyl phthalate (DINP) Method: The test is conducted according to the US CPSC Standard Operation Procedure for Determination of Phthalates, April 1, 2010 (CPSC-CH-C ) Remark: Children toys and childcare articles shall meeting the requirement of Part A. Children toys that can be placed in a child s mouth or childcare articles shall meet the requirements of both Part A and B. Note: % = percentage < = less than 8. Migration of Certain Elements EN 71-3:2013+A1:2014 Category III: Scraped-off materials Migration Extractable Elements Result (mg/kg) Limit(mg/kg) Test Item Mass of Trace Amount (mg) NA 14.8 NA NA - Aluminum (Al) < Antimony (Sb) <10 <10 <10 <10 <10 < Arsenic (As) <10 <10 <10 <10 <10 <10 47 Barium (Ba) 32 <10 < < Boron (B) <100 <100 <100 <100 <100 < Cadmium (Cd) <5 <5 <5 <5 <5 <5 17 Chromium (III) (Cr III) <10 <10 <10 <10 <10 < Chromium (VI) (Cr VI) <0.15 <0.15 <0.15 <0.15 <0.15 < Cobalt (Co) <10 <10 <10 <10 <10 < Copper (Cu) <10 <10 <10 <10 <10 < Lead (Pb) <10 <10 <10 <10 <10 <10 160

10 DATE OUT: AUG 02, 2016 PAGE: 10 of 11 Migration Extractable Elements Result (mg/kg) Limit(mg/kg) Test Item Manganese (Mn) <10 <10 <10 <10 <10 < Mercury (Hg) <10 <10 <10 <10 <10 <10 94 Nickel (Ni) <10 <10 <10 <10 <10 < Selenium (Se) <10 <10 <10 <10 <10 < Strontium (Sr) <10 <10 <10 <10 <10 < Tin (Sn) <0.8 <0.8 <0.8 <0.8 <0.8 < Organic Tin <3 <3 <3 <3 <3 <3 12 Zinc (Zn) <10 <10 <10 23 <10 < Conclusion - Method: EN 71-3:2013+A1:2014. The heavy metals content was determined by Inductively Coupled Plasma Mass Spectrophotometer (ICP-MS). For samples of migrated chromium content lower than migration limit of Chromium (VI), no speciation test for Chromium (III) and chromium (VI) were conducted. The results were derived from that of total chromium. For samples of migrated tin content calculated as tributyl tin lower than migration limit of organic tin, no organic tin test was conducted. The results were derived from that of Tin. Remark: 1. The material categories of tested item(s) are classified as below per clause 4.1 of this standard. Category I: Dry, brittle, power like or pliable materials Compressed paint tablets, materials intended toleave a trace or similar materials in solid formappearing as such in the toy (e.g. the cores ofcolouring pencils, chalk, crayons) Pliable modelling materials, including modellingclays and plaster Category II: Liquid or sticky materials Liquid paints, including finger paints, varnishes,lacquers, liquid ink in pens and similar materials inliquid form appearing as such in the toy (e.g. slimes, bubble solution) Glue sticks Category III: Scraped-off materials Coatings of paints, varnishes, lacquers, printing inks, polymers, foams and similar coatings Polymeric and similar materials, includinglaminates, whether textile reinforced or not, butexcluding other textiles Paper and paper board Textiles, whether natural or synthetic Glass, ceramic, metallic materials Other materials whether mass coloured or not (e.g. wood, fibre board, hard board, bone andleather) 2. The accessibility of the submitted sample is verified according to EN71-1 before and after abuse. Note: mg/kg = milligram per kilogram mg = milligram < = less than NA = Not applicable

11 DATE OUT: AUG 02, 2016 PAGE: 11 of 11 NOTE: If there is question or concern regarding this report, please contact the appropriate laboratory person below: General question & concern: Technical question & concern: Michelle Xiao Customer Service Coordinator (86) Ext. 885 HO Kuen Chun, James Manager (86) Ext. 819 This test report is governed by the Terms and Conditions, available on request or accessible at Attention is especially drawn to the limitations of liability, indemnification and jurisdictional provisions defined therein. This report is issued strictly based on the testing of the samples submitted by you. The test results in this report only refers to the sample(s) actually tested and does not refer or be deemed to refer to the bulk from which such sample(s) may be said to have been obtained from. In the event that MTS was requested to survey and test any bulk quantity of samples, MTS, in the absence of any contrary written instructions, performed random sampling of bulk for testing purposes. This report is not a recommendation for any specific course of action. Other than the expressed warranties made in the Terms and Conditions of the MTS Test Request Form, MTS makes no other warranties or representations either express or implied with respect to this report. In no circumstances whatsoever shall MTS be liable for any consequential, special or incidental damages arising out of or in connection with this report. This test report shall not be reproduced without the prior written permission of MTS.

12