ANSECO PASS TEST REPORT. Test Report # 6 pes. Your Pnrl11er i11 Producl Snfely. 14H December 15, 2014 Page 1 of 11. Recipient: Recipient

Transcription

1 Your Pnrl11er i11 Producl Snfely Date Received : IESDNG Page 1 of 11 SAMPLE INFORMATION: Description: Assortment: SKU/style No.: Factory/Supplier/Vendor: Country of Distribution: Quantity Submitted: Testing Period: Flying Twirler 3PKS X 7IN 3 Colors: (Neon Green I Neon Orange I Neon Yellow) & Orange color straw G16933 I United States 6 pes 12/09/ /15/2014 Purchase Order Number: Toy Co./Agency: Country of Origin: Labeled Age Grade: Recommended Age Grade: Tested Age Grade: 1701 China 4+ Over 4 years of age Over 4 years of age OVERALL RESULT: Refer to page 2 for test result summary and appropriate notes. ANSECO GROUP (HK) LIMITED ANSECO GROUP (HK) LIMITED Vincent Chow Wai Kit Manager, Chemical Laboratory Joseph Kwan Tsz Hung Assistant Manager, Physical Laboratory Tile test result(s) and cancfusion(s) in til is repor t relate to the sample(s) tested as described herein. This test report may nat be reproduced in whole or in part, without written approval of ANSECO Group (HK} Limited. # Test is not cover ed under ACLASS (Certifi cate II ) accredited listed scope. ACLA SS is recognized by I LAC, APLAC and IAAC as a signatory of multilateral r ecognition arrangements that facilitate acceptance of test internationally. ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, Kwal Fung Crescent, Kwai Chung N.T., Hong Kong Tel: Fax:

2 Your Pnrluer ;, Product Snfety I SDNO Page 2 of 11 At the request of the client, the following tests were conducted: CONCLUSION TEST(S) COUCTED CPSIA Section 106 & ASTM F Clause 4.3.5, Soluble Elements in Substrate Materials CPSIA Section 101, Total Lead in Substrate Materials CPSIA Section 108, Phthalates- Mouthable (DBP, BBP, DEHP, DnOP, DINP, DIDP) California Proposition 65, Phthalates (DBP, BBP, DEHP, DINP, DIDP, DnHP) CPSIA Section 106, Mandatory Toy Safety Standard ASTM F963-11, Mechanical Hazards 16 CFR 1500 Federal Hazardous Substances Act (FHSA_1 Mechanical Hazards ASTM F Labeling 16 CFR and ASTM F963-11, Section 4.2, Flammability of Solids 19 CFR , Country of Origin# CPSIA Section 103, Tracking Labels for Children's Products# Uniform Packaging and Labeling Regulation# The test result(s) and conc/usion(s) In this report relate to the somp/e(s) tested as described herein. This test report may not be reproduced In whole or in port, without written approval of ANSECO Group (HK) Limited. #Test is not covered under ACLASS {Certificate II ) accredited listed scope. ACLASS Is recognized by I LAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test Internationally. ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, 3842 Kwal Fung Crescenl, Kwai Chung N.T., Hong Kong Tel: Fax:

3 Your Pnrl 11er i111'roducl Safely Test Report# Date Received : IESl!NO Page 3 of 11 CPSIA Section 106 & ASTM F Clause 4.3.5, Soluble Elements in Substrate Materials Substrate Materials Other than Modeling Clay Analysis performed by Inductively Coupled Plasma-Mass Spectrometry to determine compliance with the above referenced regulation and standard. [Referenced Test Method: ASTM F Clause 8.3.5] Specimen No Test Item Result Result Result (ppm) (ppm) (ppm) Soluble Sb Soluble As Soluble Ba Soluble Cd Soluble Cr Soluble Pb Soluble Hg Soluble Se Conclusion 4 5 Result Result (ppm) (ppm) Limit Soluble (ppm) Note: Sb = Antimony; As = Arsenic; Ba = Barium; Cd = Cadmium; Cr =Chromium; Pb = Lead; Hg =Mercury; Se = Selenium ppm (Parts per million) = mg/kg (Milligrams per kilogram) L T = Less than = Not detected (Reporting Limit = 2ppm) Remark: Test portion of Specimen #1 found on single sample is 31.9 mg. The test result(s) and canclusian(s) in this report relate ta tire sample{s) tested as described herein. Tlris test report may nat be reproduced in whale ar in part, without written approval of ANSECO Group (HK) Limited. #Test Is not covered under ACLASS (Certificate II ) accredited listed scope. ACLASS is recognized by I LAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally. ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, Kwai Fung Crescent, Kwal Chung N.T., Hong Kong Tel: Fax:

4 Your Pnrt11er i11 Product Snfely IESDNQ Page 4 of 11 CPSIA Section 106 & ASTM F Clause 4.3.5, Soluble Elements in Substrate Materials Substrate Materials Other than Modeling Clay Analysis performed by Inductively Coupled Plasma-Mass Spectrometry to determine compliance with the above referenced regulation and standard. [Referenced Test Method: ASTM F Clause 8.3.5] Specimen No Result Result Result Test Item (ppm) (ppm) (ppm) Soluble Sb Soluble As Soluble Ba Soluble Cd Soluble Cr 2 Soluble Pb Soluble Hg Soluble Se Conclusion Note: Sb = Antimony; As = Arsenic; Ba = Barium; Cd = Cadmium; Cr = Chromium; Pb = Lead; Hg = Mercury; Se = Selenium ppm (Parts per million) = mg/kg (Milligrams per kilogram) LT = Less than = Not detected (Reporting Limit = 2ppm) Result Result (ppm) (ppm) Limit Soluble (ppm) The test result(s) ond conclusion(s) in this report relate to the sample(s) tested as described herein. This test report moy not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited. #Test is not covered under ACLASS (Certificate# ) accredited listed scope. ACLASS is recognized by I LAC, APLAC and IAAC as a signatory of multilater al r ecognition arrangements that facilitate acceptance o f test internationally. ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, Kwai Fung Crescenl, Kwai Chung N.T., Hong Kong Tel: Fax:

5 Your Pnrluer ill Product Snfety J(mNO AT Page 5 of 11 CPSIA Section 101, Total Lead in Substrate Materials Analysis performed by Inductively Coupled Plasma Optical Emission Spectrometry to determine compliance with the above referenced regulation. [Referenced Test Method: CPSC-CH-E (Non-Metal)] Specimen No Test Item Result Result Result (ppm) (ppm) (ppm) Total Pb Conclusion Result Result (ppm) (ppm) Limit Total (ppm) 100 Note: Pb =Lead ppm (Parts per million) = mg/kg (Milligrams per kilogram) LT = Less than = Not detected (Reporting Limit= 20ppm) Composite results are based on specimen of least mass resulting in highest potential concentration. The test result(s) and cancluslon(s) in this report relate to the sample(s) tested os described herein. This test report may not be reproduced In whole or In port, without written approval of ANSECO Group (HK) Limited. # Test is not covered under ACLASS (Certificate II ) accredited listed scope. ACLASS Is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally. ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, <wal Fung Crescent, Kwal Chung N.T., Hong Kong Tel: Fax: CS-HK REOOS ansecogroup.com Ver.Ol

6 Your Pnrluer iu Product Safely nmnq Test Report# Page 6 of 11 CPSIA Section 108, Phthalates- Mouthable (DBP, BBP, DEHP, DnOP, DINP, DIDP) Analysis performed by Gas Chromatography/Mass Spectrometry to determine compliance with the above referenced regulation. [Referenced Test Method: CPSC-CH-C ] Specimen No Test Item Result Result Result Result Result (ppm) (ppm) (ppm) (ppm) (ppm) DBP BBP DEHP DnOP DINP DIDP Conclusion Limit (ppm) Note: DBP = Dibutyl phthalate; BBP = Benzyl butyl phthalate; DEHP = Di-(2-ethylhexyl) phthalate DINP = Diisononyl phthalate, DIDP = Diisodecyl phthalate; DnHP = Di-n-hexyl phthalate ppm (Parts per million) = mg/kg (Milligrams per kilogram) = % w/w (Percent by weight) LT = Less than = Not detected (Reporting Limit = 120ppm) Composite results are based on specimen of least mass resulting in highest potential concentration. The test result{s) and canclus/on(s) In tllis report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or In part, without written approval of ANSECO Group (HK) Limited. #Test Is not covered under ACLASS (Certificate# ) accredited listed scope. ACLASS Is recognized by I LAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally. ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, Kwal Fung Crescent, Kwai Chung N.T., Hong Kong Tel: Fax: CS HK-REOOS ansecogroup.com Ver.Ol

7 Your Pnrluer i11 Produd Snfely JESDNQ AT Page 7 of 11 California Proposition 65, Phthalates (DBP, BBP, DEHP, DI NP, DIDP, DnHP) Analysis performed by Gas Chromatography/ Mass Spectrometry to determine compliance with the above referenced regulation. [Referenced Test Method: CPSC-CH-ClOOl-09.3] Specimen No Test Item Result Result Result Result Result (ppm) (ppm) (ppm) (ppm) (ppm) DBP BBP DEHP DINP DIDP DnHP Conclusion Limit (ppm) * Note: DBP = Dibutyl phthalate; BBP = Benzyl butyl phthalate; DEHP = Di-(2-ethylhexyl) phthalate DINP = Diisononyl phthalate, DIDP = Diisodecyl phthalate; DnHP = Di-n-hexyl phthalate ppm (Parts per million) = mg/kg (Milligrams per kilogram) = % w/w (Percent by weight) LT = Less than = Not detected (Reporting Limit = 120ppm) Composite results are based on specimen of least mass resulting in highest potential concentration. Remark: *On 20 December 2013, diisononyl phthalate (DINP) was added onto the Prop 65 list of chemicals as a chemical known to the state of California to cause cancer. DINP is among the phthalates commonly used as plasticisers in various polyvinyl chloride (PVC) products such as wire and cable coatings, wall coverings, roofing, coated fabrics, self-adhesive films and automobile parts. Starting 20 December 2014 local California Attorney-generals and non-governmental organizations will be allowed to begin enforcement actions against businesses and manufacturers that fail to warn consumers about exposure to DINP. The test result(s) and concluslon(s) In tills report relate to the somple(s} tested as described herein. T/Jis test report may not be reproduced In whole or in part, without written approval of ANSECO Group (HK} Limited. #Test is not covered under ACLASS (Certificate #I ) accredited listed scope. ACLASS is recognized by I LAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test Internationally. ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, Kwal Fung Crescent, Kwai Chung N.T., Hong Kong Tel: Fax:

8 Your Partner iu Produd Safety 1 Date of I ssue: T SDNQ Page 8 of 11 CPSIA Section 106, Mandatory Toy Safety Standard ASTM F963-11, Mechanical Hazards 16 CFR 1500, Federal Hazardous Substances Act (FHSA), Mechanical Hazards Mechanical hazards evaluated as described in 16 CFR and ASTM F963-11, as applicable. Test Conclusion Observation Impact No Sharp Edges or Sharp Points Torque No Sharp Edges or Sharp Points Tension No Sharp Edges or Sharp Points Other Applicable ASTM F Sections Section Test Conclusion 4.1 Material Quality 4.7 Accessible Edges 4.9 Accessible Points 4.18 Holes, Clearances and Accessibility of Mechanisms 5.16 Promotional Materials 7.1 Producers Markings 16 CFR and ASTM F963-11, Section 4.2, Flammability of Solids Test Conclusion Observation Flammability of Solids The burn rate is less than or equal to 0.1 in/sec. 19 CFR , Country of Origin# Country of Origin Test Conclusion Observation Present on packaging and can be read easily by consumer at the point of sale The t est result(s) and canc/us/on(s) In tills report relate to the sample(s) tested as described herein. This test report may not be reproduced In whole or in part, without written approval of ANSECO Group (HK) Limited. # Test is not covered under ACLASS (Certificate H ) accredited listed scope. ACLASS is recognized by JLAC, APLAC and IAAC as a signatory of multilateral recognition arrangement s that facilitate acceptance of test internationally. ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, <wai Fung Crescent, Kwai Chung N.T., Hong Kong Tel: Fax:

9 Your Pnrt11er i11 Product Safety TESQHG Page 9 of 11 CPSIA Section 103, Tracking Labels for Children's Products# Requirement Conclusion Observation Manufacturer or private labeler listed, location & date of manufacture, including batch, run Information was present. number and/or other identifying characteristics Uniform Packaging and Labeling Regulation# Test Conclusion Observation Declaration of Identity The packaging contains the declaration of identity Declaration of Responsibility The packaging contains the declaration of responsibility Tile test result(s) and conc/usion(s) in this report relate to the sample(s) tested os descr ibed herein. This test report may not be reproduced in whale or in part without written approval of ANSECO Group (HK) Limited. #Test is not covered under ACLASS (Certificate # ) accredited listed scope. ACLASS is recognized by I LAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test int ernat ionally. ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, Kwai Fung Crescent, Kwai Chung N.T., Hong Kong Tel: Fax:

10 Your Part11er i11 Product Safety Test Report# IESDNQ Page 10 of 11 SPECIMEN DESCRIPTION: Specimen No. Specimen Description Location 1 Black printed transparent plastic with adhesive 2 Orange plastic 3 Green plastic 4 Yellow plastic 5 Orange PVC 6 Red soft plastic 7 Green soft plastic 8 Yellow soft plastic 9 Translucetn glue Sticker of flying twirlers Flying twirler Flying twirler Flying twirler Handle of flying twirlers End of flying twirlers End of flying twirlers End of flying twirlers Glue of end of flying twirlers The test result{s) and canclusion{s) in this report rela te to the sample{s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval af ANSECO Group {HK) Limited. #Testis not covered under ACLASS (Certificate II ) accredited listed scope. ACLASS is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements t hat facilitate acceptance of test Internationally. ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, 3842 Kwai Fung Crescenl, Kwal Chung N.T., Hong l<ong Tel: Fax: CS HK REOOS ansecogroup.com Ver.Ol

11 Your Pnrl uer in Product Safety IW!!Ia AT Page 11 of 11 SAMPLE PHOTO: -End Report- The test result(s) and canclusian(s) In tills report relate to the sample(s) tested as described herein. Tills test report may not be reproduced In whole or In part, without written approval of ANSECO Group (HK) Umited. #Test is not covered under ACLASS {Certificate II ) accredited listed scope. ACLASS is recognized by I LAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test Internationally. ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, Kwai Fung Crescenl, Kwai Chung N.T., Hong l<ong Tel: Fax: