UNITED s Tool Holder Bushings and Accessories
|
|
- Isabella Casey
- 5 years ago
- Views:
Transcription
1 Tool Holder ushings s Tool Holder ushings and ccessories You Will Want to Hold With These! HT Tool Holder ushing with Long Slots H Split ushing With lat HJ With 4 learance Holes HH Knurled Head ollet HP Headless ollet HJ With learance Holes HS Plain Soft ondition for ustom Holes LH Liner ushing U-TH Tap Holder U-T Tool ollar H ollet Holder ushing S oring ar Sleeve S Necked Down for oolant 70 Holding Power That Will Hold You ll Ways!
2 ollet ushings Single Piece onstruction or ll Screw Machines, utomatic N, Turrets and Second Operation Machines There is a Solution to your lost rings, bushings and missing parts! Simply specify s SINLE PIEE solid construction, precision ground, close tolerance TOOL HOLDER USHINS with 4 SPLITS TWO WYS. Tool Holder ollet ushings - HH - HP Does your Tool Holder ushings Inventory resemble this? They collapse concentrically and grip tools 360º in solid or floating holders. If so, take that stuff and shelve it! Reduce the searching and assembly costs with perfect alignment bushings for your rown & Sharpe, cme, Hardinge, utomatic N Machines, Turrets and Lathes. HH Knurled Head Type vailable in complete size ranges in both Knurled Head and Plain Headless Styles. HP Plain Headless Type 1 Single Piece onstruction 6 Heat Treated lloy Steel 2 ollapses oncentrically T.I.R MX I. D. TOLERNES OR OLLET TOOL HOLDER USHINS 7 Perfect lignment 3 rips Tool 360º Up to 1/ to Sizes learly Marked 4 Precision round Nominal /4 to to latted Entire Length to it Set Screw 5 Precision round Nominal - See chart: Over to Long Life WOODRU VE. DOWNEY, TELEPHONE (562) / (800) IN / (800) X (562) / (800)
3 Tool Holder ollet ushings Type HP 4 SPLITS TWO WYS 360º RIP oncentric HP 1 Single Piece onstruction 6 Heat Treated lloy Steel 2 ollapses oncentrically T.I.R MX 7 Perfect lignment 3 rips Tool 360º 8 Sizes learly Marked 4 Precision round Nominal latted Entire Length to it Set Screw 5 Precision round Nominal -- See inset chart. 10 Long Life Holds un Drills, ounterbores, Taps, enter Drill Reamers, Step Drills, End Mills and hamfer Tools Plain Headless complete range of sizes from #80 to 1-1/2" DRILL RNE SIZE OVERLL/ by 16ths STNDRD DRILL SIZE NSI Y 64ths N S I 1/2 3/4 15/16 1-1/4 2" 2-1/2 NOMINL DEIML NOM. DEIML SYMOL #80 - # / HP I. D. TOLERNES OR OLLET TOOL HOLDER #68-3/ / HP USHINS #55-1/ / HP Up to 1/ to /4 to to #52 - # / HP Over to #42 - # / HP #9 - L / HP M - 11/ / HP S - 7/ / HP /32 - # / HP #9 - L / HP M - 7/ / HP /64-1/ / HP /16 - # / HP #42 - # / HP #9 - L / HP M - 11/ / HP S - 5/ / HP /8 - # " HP / " HP S - 13/ " HP /16-1" / HP /8-1-1/ / HP /2-1-1/ / HP /8-1-1/ " HP Holding Power That Will Hold You ll Ways! Standard Drill & Reamer Sizes INH DEIML INH DEIML / / / / D,2460 1/ E / / H I J K / L M / / N / O P / / Q R / S T / / U / V W / X / Y / Z / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / "
4 INH DEIML INH DEIML / / / / D,2460 1/ E / / H I J K / L M / / N / O P / / Q R / S T / / U / V W / X / Y / Z / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / " HH Holds Drills, Reamers, enter Drills, urr Tools Tool Holder ollet Head ushings - HH WOODRU VE. DOWNEY, TELEPHONE (562) / (800) IN / (800) X (562) / (800) Standard Drill & Reamer Sizes 4 SPLITS TWO WYS HH ONE-PIEE PREISION ONENTRI SPLIT USHINS TOOL HOLDER OLLET USHINS OR WIDE VRIETY O JOS DRILL RNE SIZE OVERLL/ by 16ths STNDRD DRILL SIZE NSI Y 64ths N S I 1/2 3/4 15/16 1-1/4 2" 2-1/2 NOMINL DEIML NOM. DEIML SYMOL #80 - # / HH #68-3/ / HH #55-1/ / HH #52 - # / HH #42 - # / HH #9 - L / HH M - 11/ / HH Up to.2500 Over.2500 to S - 7/ / HH Over /32 - # / HH #9 - L / HH M - 7/ / HH /64-1/ / HH /16 - # / HH #42 - # / HH #9 - L / HH M - 11/ / HH S - 5/ / HH I. D. TOLERNES OR OLLET TOOL HOLDER 1/8 - # " HH / " HH S - 13/ " HH /16-1" / HH /8-1-1/ / HH /2-1-1/ / HH to to to 5/8-1-1/ " HH
5 Tool Holder ushings HJ and H Styles Tool Holder ushings S HJ and H HJ Select your machine size and tool size to order from chart. HJ ETURES: OMINTION O H ND HJ S LERNE HOLES OR SET SREWS SPLIT WITH MILLED LT STOKED IN STNDRD ORE SIZES combined the standard style split bushing and J set screw clearance bushing for the new DUL PURPOSE HJ TOOL HOLDER USHINS. The improved Tool Holder with clearance holes and split milled flat is for either or J style and is now the industry leader! SETS Style HJ shown. Styles H and HJ are also available in Sets, furnished with wooden storage blocks. TOOL HOLDER USHIN SETS NO. of INSIDE DIMETERS UD-HJ /2 6 1/2-5/8-3/4-7/ /4 UD-HJ /4 7 1/2-5/8-3/4-7/ /4-1-1/2 UD-HJ /4-7/ /4-1-1/2-1-3/4 UD-HJ /2 8 3/4-7/ /4-1-1/2-1-3/ /4 74 HJ STNDRD ORE SIZES SPEIL SIZES MIN MX ORE ORE USH DI. Under DI. X UNDER to enter Line Holding Power That Will Hold You ll Ways! Y HOLE to enter Line UD-HJ /4, 5/16, 3/8, 1/2, 3/4 (7 thru 20mm) /4 1-3/16 3/16 1/2 3/4 5/8 2 UD-HJ /8, 1/2, 5/8, 3/4, 7/8, 1 (10 thru 26mm) /4 2-1/4 1-7/16 1/4 9/16 1 3/4 2 UD-HJ /2, 5/8, 3/4, 7/8, 1, 1-1/4 (13-33mm) /2 2-1/2 1-11/16 1/4 11/16 1-1/8 7/8 2 UD-HJ /2, 5/8, 3/4, 7/8, 1, 1-1/4, 1-1/2 (13-39mm) / /8 5/16 3/4 1-1/4 7/8 2 UD-HJ /4, 7/8, 1, 1-1/4, 1-1/2, 1-3/4 (20-45mm) /2 2-3/8 5/16 3/4 1-1/2 1 2 UD-HJ /4, 7/8, 1, 1-1/4, 1-1/2, 1-3/4, 2, 2-1/4 (20-58mm) / /8 3/8 7/8 1-3/4 1-1/4 2 UD-HJ , 1-1/4, 1-1/2, 1-3/4, 2, 2-1/4, 2-1/2 (26-64mm) /2 3-5/8 7/ /4 4 UD-HJ , 1-1/4,1-1/2, 1-3/4, 2, 2-1/4, 2-1/2, 3 (26-77mm) /2 5-1/4 4 1/2 1-1/4 2-1/2 1-1/4 4 ORDERIN EXMPLE: OR HJ (SPLIT TYPE) WITH 1-1/2" ND 1", SPEIY: UD-HJ " USHIN lack Oxide, Hardened and round H STNDRD ORE SIZES SPEIL SIZES MIN MX ORE ORE H USH DI. Under DI. X UNDER to enter Line UD-H /4, 5/16, 3/8, 1/2 (7 thru 13mm) /4 1-1/2 1 3/16 N/ N/ N/ N/ UD-H /4, 5/16, 3/8, 1/2, 3/4 (7 thru 20mm) /4 1-3/16 3/16 N/ N/ N/ N/ UD-H /8, 1/2, 5/8, 3/4, 7/8, 1 (10-26mm) /4 2-1/4 1-7/16 1/4 N/ N/ N/ N/ UD-H /2, 5/8, 3/4, 7/8, 1, 1-1/4 (13-33mm) /2 2-1/2 1-11/16 1/4 N/ N/ N/ N/ UD-H /2, 5/8, 3/4, 7/8, 1, 1-1/4, 1-1/2 (13-39mm) / /8 5/16 N/ N/ N/ N/ UD-H /4, 7/8, 1, 1-1/4, 1-1/2, 1-3/4 (20-45mm) /2 2-3/8 5/16 N/ N/ N/ N/ UD-H /4, 7/8, 1, 1-1/4, 1-1/2, 1-3/4, 2, 2-1/4 ( / /8 3/8 N/ N/ N/ N/ UD-H , 1-1/4, 1-1/2, 1-3/4, 2, 2-1/4, 2-1/2 (26-64mm) /2 3-5/8 7/16 N/ N/ N/ N/ UD-H , 1-1/4, 1-1/2, 1-3/4, 2, 2-1/4, 2-1/2, 3 ( /2 5-1/4 4 1/2 N/ N/ N/ N/ ORDERIN EXMPLE: OR H (SPLIT TYPE) WITH 1-1/2" ND 1", SPEIY: UD-H " USHIN lack Oxide, Hardened and round Y HOLE to enter Line Z HOLE SIZE Z HOLE SIZE NO. O HOLES H Split ushings were manufactured for versatile systems and all sizes of N Lathes, Turrets and huckers. Heat treated and precision ground concentric, the H Tool Holder adapts drills, boring bars and all shank tools. Select your machine size and tool size and order from chart. H ETURES: SPLIT TYPE MILLED LT DPTS ROUND SHNK TOOLS to STNDRD TURRET or TOOL HOLDERS NO. O HOLES
6 Tool Holder ushings S HJ and HS Tool Holder ushings HJ and HS Styles HJ ETURES: NO-SPLIT TYPE HJ LERNE HOLES OR SET SREWS STOKED IN STNDRD ORE SIZES HJ USHINS WITH 2 OR 4 HOLES HJ ushings clamp directly on the tool through the clearance holes for positive alignment of your cutting tool edges. Hardened and ground concentric. HJ STNDRD ORE SIZES SPEIL SIZES MIN MX ORE ORE USH DI. Under DI. X UNDER to enter Line Y HOLE to enter Line UD-HJ /4, 5/16, 3/8, 1/2 (7 thru 13mm) /4 1-1/2 1 3/16 1/2 3/4 1/2 2 UD-HJ /4, 5/16, 3/8, 1/2, 3/4 (7 thru 20mm) /4 1-3/16 3/16 1/2 3/4 5/8 2 UD-HJ /8, 1/2, 5/8, 3/4, 7/8, 1 (10 thru 26mm) /4 2-1/4 1-7/16 1/4 9/16 1 3/4 2 UD-HJ /2, 5/8, 3/4, 7/8, 1, 1-1/4 (13-33mm) /2 2-1/2 1-11/16 1/4 11/16 1-1/8 7/8 2 UD-HJ /2, 5/8, 3/4, 7/8, 1, 1-1/4, 1-1/2 (13-39mm) / /8 5/16 3/4 1-1/4 7/8 2 UD-HJ /4, 7/8, 1, 1-1/4, 1-1/2, 1-3/4 (20-45mm) /2 2-3/8 5/16 3/4 1-1/2 1 2 UD-HJ /4, 7/8, 1, 1-1/4, 1-1/2, 1-3/4, 2, 2-1/4 ( / /8 3/8 7/8 1-3/4 1-1/4 2 UD-HJ , 1-1/4, 1-1/2, 1-3/4, 2, 2-1/4, 2-1/2 (26-64mm) /2 3-5/8 7/ /4 4 UD-HJ , 1-1/4, 1-1/2, 1-3/4, 2, 2-1/4, 2-1/2, 3 ( /2 5-1/4 4 1/2 1-1/4 2-1/2 1-1/4 4 ORDERIN EXMPLE: OR HJ WITH 1-1/2" ND 1", SPEIY: UD-HJ " USHIN lack Oxide, Hardened and round Z HOLE SIZE NO. O HOLES HS ETURES: SOT ONDITION LNK (No Hole) PREISION ROUND ENTERS OTH ENDS MILLED LT HS YOU SPEIY DIMENSION! SOT ONDITION DO IT YOURSEL TOOL HOLDER USHINS HS ushings have no holes so you can drill them to your special needs. enters are soft solid ready to fit to odd size requirements or last minute need. We can ship the same day as you call. Ideal for all sizes of drills, reamers, bucking bars and shank tools. Ready to machine to your specifications. HS SOLID - NO HOLE STNDRD ORE SIZES SPEIL SIZES MIN MX ORE ORE USH DI. Under WOODRU VE. DOWNEY, TELEPHONE (562) / (800) IN / (800) X (562) / (800) DI. X UNDER to enter Line Y HOLE to enter Line UD-HS SOT SOLID NO HOLE DO IT YOURSEL! 3/4 1-1/2 1 3/16 N/ N/ N/ N/ UD-HS SOT SOLID NO HOLE DO IT YOURSEL! 1 1-3/4 1-3/16 N/ N/ N/ N/ N/ UD-HS SOT SOLID NO HOLE DO IT YOURSEL! 1-1/4 2-1/4 1-7/16 3/16 N/ N/ N/ N/ UD-HS SOT SOLID NO HOLE DO IT YOURSEL! 1-1/2 2-1/2 1-11/16 1/4 N/ N/ N/ N/ UD-HS SOT SOLID NO HOLE DO IT YOURSEL! 1-3/ /8 5/16 N/ N/ N/ N/ UD-HS SOT SOLID NO HOLE DO IT YOURSEL! 2 3-1/2 2-3/8 5/16 N/ N/ N/ N/ UD-HS SOT SOLID NO HOLE DO IT YOURSEL! 2-1/ /8 3/8 N/ N/ N/ N/ UD-HS SOT SOLID NO HOLE DO IT YOURSEL! 3 4-1/2 3-5/8 7/16 N/ N/ N/ N/ UD-HS SOT SOLID NO HOLE DO IT YOURSEL! 3-1/2 5-1/4 4 1/2 N/ N/ N/ N/ ORDERIN EXMPLE: OR HS WITH 1-1/2", SPEIY: UD-HS USHIN lack Oxide, Hardened and round Z HOLE SIZE NO. O HOLES 75
7 HZ - H Tool Holder ushings Tool Holder ushings With Elongated Slots Made by US uilt to Last! HZ its all Turrets huckers N N Machines. Hardened Precision round oncentric Universally accepted INH STNDRD ORE SIZES MM USH DI. INH MM Under DI UD-HZ /8-1/2-5/8-3/4-7/8-1 10, 12, 16, 20, / /16 5/8 2-5/8 UD-HZ /8-1/2-5/8-3/4-7/ /4 10, 12, 16, 20, 25, / /4 1-3/4 3/4 2-7/8 UD-HZ /2-5/8-3/4-7/ /4-1-1/2 12, 16, 20, 25, / /2 2-1/8 3/4 3-1/8 UD-HZ /2-5/8-3/4-7/ /4-1-1/2-1-3/4 12, 16, 20, 25, 32, 40, /4 2-3/8 3/4 3-3/8 UD-HZ /8-3/ /4-1-1/2-1-3/ /4 16, 20, 25, 32, 40, 45, / /4 2-7/8 3/4 3-7/8 UD-HZ /4-1-1/2-1-3/ /4-2-1/2 25, 32, 40, 50, /4 3-5/8 3/4 4-3/8 UD-HZ /4-1-1/2-1-3/ /4-2-1/2-3 25, 32, 40, 50, / / /8 UD-HZ /2-1-3/ /4-2-1/2-3 40, 50, 60, 65, /4 4-1/ /8 of SLOT S LON SLOTS LLOW SET SREWS TO HOLD TOOL IRMLY HT Precision oncentrically round lack Oxided dapts to all Drills, Reamers and oring ars INH STNDRD ORE SIZES MM USH DI. INH MM Under DI UD-HT /4-5/16-3/8-1/2-5/8-3/4 8, 10, 12, 16, /4 1-3/16 3/16 2-3/8 UD-HT /8-1/2-5/8-3/4-7/8-1 10, 12, 16, 20, / /4 1-7/16 1/4 2-7/8 UD-HT /8-1/2-5/8-3/4-7/ /4 10, 12, 16, 20, 25, / /8 1-11/16 1/4 3 UD-HT /2-5/8-3/4-7/ /4-1-1/2 12, 16, 20, 25, 32, / /2 2-1/8 5/16 3-1/8 UD-HT /2-5/8-3/ /4-1-1/2-1-3/4 12, 16, 20, 25, 32, 40, /8 5/16 3-5/8 UD-HT / /4-1-1/2-1-3/ /4 20, 25, 32, 40, 45, / /2 2-7/8 3/8 4-1/8 UD-HT /4-1-1/2-1-3/ /4-2-1/2 25, 32, 40, 50, 60, /8 7/16 4-5/8 UD-HT /4-1-1/2-1-3/ /4-2-1/2-3 25, 32, 40, 50, 60, / /4 3-5/8 7/16 5 of SLOT S 76 Holding Power That Will Hold You ll Ways!
8 New ollet Holder ushing s Superior Quality by Design H ollet Holder ushing its all screw machines, lathes, turrets. Ideal for N ccommodates all drills, reamers, counterbores, end mills H 5-ollet Holder ushing LK OXIDE INISH This unique tool holds all sizes of 5 ollets for every conceivable drill, reamer, counterbore, end mill, core drill and countersink. Provides clean concentric grip and location omplete flexibility to your machines! USH DI. INH MM DI LOK NUT U-H / /4 2 1/2 1-7/16 x 7/8 U-H / /4 2-1/4 1/2 1-11/16 x 7/8 U-H /4 2-1/2 1/2 1-15/16 x 7/8 U-H / /4 3 1/2 2-7/16 x 7/8 Screw Holes learance Split with lat dapts with all tools LH Tool Holder Liner ushing H 2 HOLES LK OXIDE INISH onvenient Easily used Most important To Hold Let s Liner Do It! SPEIY INH STNDRD ORE SIZES MM USH DI. INH MM OVERLL DIMENSIONS D E HOLES H SIZE NO. SPEIL ORE SIZE MIN MX U-LH /8-1/2-5/8-3/4-7/ /4 10, 12, 16, 20, 25, / /4 1-5/8 7/8 2 3/8 1-1/4 U-LH /2-5/8-3/4-7/ /4-1-1/2 12, 16, 20, 25, 32, / /8 1-5/8 7/8 2 3/8 1-1/2 U-LH /8-3/ /4-1-1/2-1-3/4-2 16, 20, 25, 32, 40, 45, / /2 7/ /2 2 U-LH / /4-1-1/2-1-3/ /4 20, 25, 32, 40, / /2 7/ /2 2-1/ WOODRU VE. DOWNEY, TELEPHONE (562) / (800) IN / (800) X (562) / (800)
9 Tap Tool Holder ushings Tap Holder ushings Precision Made by US Quality to Last! U-TH SPEIY TP SIZE TP HOLDER USHINS Sometimes referred to as 'K' type Tap Holder ushings. INDUSTRY USH TYPE USHIN DI. MIN TP MX TP MX PIPE TP USHIN DI s precision milled bushings are hard ground and concentric. Manufactured to close tolerances for maximum grip and minimum slippage. TP SIZES VILLE SPEIY WHEN ORDERIN U-TH K 1 8 5/8 1/8 PIPE 15/16 1-3/16 3/ /8-1/4-5/16-3/8-7/16-1/2-9/16-5/8 U-TH K 1-1/4 1/4 1-1/4 1 PIPE 1-3/16 1-7/16 1/4 1/4 thru 5/8-11/16-3/4-13/16-7/8-15/ /8-1-1/4 U-TH K 1-1/2 1/4 1-1/4 1 PIPE 1-5/ /16 1/4 1/4 thru 5/8-11/16-3/4-13/16-7/8-15/ /8-1-1/4 ORDERIN EXMPLE INLUDES TP SIZE: U-TH /4-20 U-T TOOL OLLRS SREWS RE PROVIDED Tool ollars are designed for use with oring ars, oring ar Sleeves, Spindle shaft leveling collars, and preset type tooling. ollars are hardened and ground with black oxide finish. Excellent Stop Jam collar nuts for all leveling tools and leveling pad threaded shanks. Special sizes and metric sizes are available on request. 78 STNDRD ORE SIZES INH MM Holding Power That Will Hold You ll Ways! USH DI. U-T /4 U-T / /4 3/4 U-T / /2 3/4 U-T / /4 3/4 U-T /4 U-T / /4 3/4 U-T / /2 3/4 U-T / /4 3/4 U-T U-T / /2 1 U-T
10 oring ar Sleeves or N -- N -- TURRETS -- LTHES -- HUKERS TOUH and WER RESISTNT -- YERS O DEPENDILITY oring ar Sleeves U-S S ORIN R SLEEVES DI. 2 1 OVERLL (ractions) (1/64ths) (1/16ths) SMLL DI. Necked Down allowing coolant to pass Precision round, oncentrically Hardened and round 1 2 OVERLL lack Oxide inish oring ar Sleeves adapt to and support most all oring ars, Shank type tools, Drills, Reamers, and ounterbores to any N Machines and conventional Turrets and Lathes. They are the extensions for hard to reach areas. 90º Spacing between flat and set screws, allowing clamping from top or bottom assures aligned clamping. The necked down boring bar IN. MM IN. MM LENT H D LEN. E 1 1ST 2 2ND SREW IN. MM IN. MM OVERLL D LEN. LO. E 1 1ST SREW 2 2ND SREW SREW SIZE U-S /4 1/4 6 3/ /2 3/8 3/ U-S /6 5/16 8 3/ /2 3/8 3/ U-S /8 3/8 10 3/ /2 3/8 3/ U-S /2 1/2 12 3/ /8 3/ U-S /16 5/ /4 7/16 7/8 1/4-28 U-S /8 3/ /4 7/16 7/8 1/4-28 U-S /2 1/ /16 7/8 1/4-28 U-S /8 3/ / /2 1-1/2 3/8 7/8 1/4-28 U-S /2 1/ / /2 2 7/16 1 1/4-28 U-S /8 5/ / /2 2 7/16 1 1/4-28 U-S /4 3/ / /2 2 7/16 1 1/4-28 U-S /8 7/ / /2 2 7/ U-S / /2 2 7/ U-S /8 3/ / /2 3/8 7/8 1/4-28 U-S /2 1/ / /16 1 5/16-24 U-S /8 5/ / /16 1 5/16-24 U-S /4 3/ / /2 7/16 1 5/16-24 U-S /8 7/ / /2 7/16 1 5/16-24 U-S / /16 1 5/16-24 U-S /2 1/ / /2 7/16 1 5/16-24 U-S /8 5/ / /2 7/16 1 5/16-24 U-S /4 3/ / /2 7/16 1 3/8-24 U-S /8 7/ / /16 1 3/8-24 U-S / /16 1 3/8-24 U-S /8 5/ /16 1 7/16-20 U-S /4 3/ /4 1/2 1 7/16-20 U-S /8 7/ /16 1 7/16-20 U-S /2 1 1/2-20 U-S /4 1-1/ /2 1 1/2-20 U-S /8 5/ / /2 1/2 1 1/2-20 U-S /4 3/ / /2 1 1/2-20 U-S / /2 1/2 1 1/2-20 U-S /4 1-1/ / /2 1 1/2-20 U-S /2 1-1/ / /2 1 1/2-20 U-S /2 3-1/2 1/2 1 1/2-20 U-S /4 1-1/ /2 4 1/2 1 1/2-20 U-S /2 1-1/ /2 4 1/2 1 1/2-20 U-S /4 1-3/ /2 4 5/8 1-1/4 1/2-20 U-S /2 4 1/2 1 1/2-20 U-S /2 1-1/ /32 1-7/8 5/8-18 U-S /4 1-3/ /8 1-7/8 5/8-18 U-S /32 1-3/4 5/8-18 U-S /2 2-1/ /8 2 5/8-18 U-S /4 1-1/4 5/ WOODRU VE. DOWNEY, TELEPHONE (562) / (800) IN / (800) X (562) / (800)
11 Spacer ushings With NEW P/Ns ROR SPIN OLLR USHINS rbor Spacing ollar ushings ROR SPER USHINS assure accurate positioning of milling cutters. These close-tolerance ollar ushings are furnished with Standard Keyways. Hardened and ground. Rockwell Edges are chamfered. aces are ground parallel. Ends parallel & flat within.0005 Ends square to within.001 T.I.R. KEY WIDTH KEY DEPTH ±.005 lso known as ollar ushings Sold in Sets of 15 from 1/8" to 3" (SEE ITEMS LISTED Y OLUMNS ELOW.) NEW PRT NUMERS ELOW: Specials are available on request. or Separately KEYWY SIZES WIDTH 1/8 1/8 1/8 1/4 5/16 3/8 1/2 1/2 D DEPTH 1/16 1/16 1/16 3/32 1/8 5/32 3/16 3/16 E ELOW x x 5/8 x 1" 3/4 x 1-1/8 x 7/8 x 1-3/8 x 1" x 1-1/2 x 1-1/4 x 1-3/4 x 1-1/2 x 2-1/8 x 2" x 2-3/4 x 2-1/2 x 3-1/4 1/8 S S S S S S S S /16 S S S S S S S S /4 S S S S S S S S /16 S S S S S S S S /8 S S S S S S S S /16 S S S S S S S S /2 S S S S S S S S /8 S S S S S S S S /4 S S S S S S S S /8 S S S S S S S S " S S S S S S S S /4 S S S S S S S S /2 S S S S S S S S OMPLETE SETS Y P/N INLUDE 2" S S S S S S S S " S S S S S S S S S LL OVE S LL OVE S LL OVE S LL OVE S LL OVE S LL OVE S LL OVE S LL OVE 80 Holding Power That Will Hold You ll Ways!
Original Chiksan Swivel Joints
Original hiksan Swivel Joints Steamlined bore minimizes flow restrictions Smooth, round bore design minimizes turbulence and pressure drop, Longsweep and TripleStep swivel joints have extralong radius
More informationDescription The 4000 Series offers up to 8600 in-lb of torque and 25 gpm (continuous ratings). This is the corner stone of the Char-Lynn line.
Highlights Features ety of mounting flanges and output shafts options Benefits motor into a system tough applications Applications Description The 0 Series offers up to 0 in-lb of torque and gpm (continuous
More informationFittings & Accessories
Fittings & Accessories Adalet offers a range of fittings and accessories for use in general purpose or industrial locations. These fittings and accessories are used in conjunction with our industrial electrical
More informationSelect. GT 500 DZ Premium PM Cobalt FIREX Coated Drills. NEW for Premium quality, competitively priced high-performance cutting tools
Select GT 500 DZ Premium PM Cobalt FIREX Coated Drills NEW for 2011 Premium quality, competitively priced high-performance cutting tools The Tool Company Select Overview and Table of Contents: Powdered
More informationDescription The 4000 Series offers up to 8600 in-lb of torque and 25 gpm (continuous ratings). This is the corner stone of the Char-Lynn line.
Highlights Features displacements, a variety of mounting flanges and output shafts Reliable, proven design High efficiency Environmental protection options Benefits Flexiblilty in designing this motor
More informationTable of Contents. Flexi-Overdenture Characteristics
A s with Flexi-Post Flexi-Overdenture has the unique threaded split shank that creates maximum retention with minimum stress to the root. It is manufactured in stainless steel for the direct/non-coping
More informationPre-Operative Planning. Positioning of the Patient
Surgical Technique Pre-Operative Planning Decide upon the size and angle of the barrel plate to be used from measuring the x-rays. To maximise the sliding action when using shorter lag screws, the Short
More informationOrthotics. capability from a minimum inventory of interconnecting modular components.
Orthotics The integrated KFO system was designed to give the orthotist maximum prescriptionfilling capability from a minimum inventory of interconnecting modular components. KFO is a completely modular
More informationWear sleeves. General
Wear sleeves General..................................................................... 332 SKF SPEEDI-SLEEVE.......................................................... 333 Features...................................................................
More informationversatile SOLUTION for COMPLEX fractures
hand plating system versatile SOLUTION for COMPLEX fractures hand plating system hps provides everything you need to treat the personality of the fracture. hps includes 53 different plates, 5 screw designs,
More informationversatile SOLUTION for COMPLEX fractures
hand plating system versatile SOLUTION for COMPLEX fractures hps advantages Minimizing soft tissue irritation and adhesions The hps plates are highly polished to reduce surface microroughness, resulting
More informationACFT EQUIPMENT LIST (1 X LANE REQUIREMENT)
During IOC and FOC beginning 01 OCT 18 and ending 30 SEP 20, the standard ACFT equipment set will reside at the battalion level, which will consist of fifteen lanes. ACFT equipment found within a single
More informationSKF SPEEDI-SLEEVE. and large diameter wear sleeves
SKF SPEEDI-SLEEVE and large diameter wear sleeves Contents The SKF rand now stands for more than ever efore, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark
More information10. Clockmaker's supplies
10. 1. Clockmakers supplies Twist drills. Taps & Dies. Screws & nuts. Winding keys. Pins & bushes. Dial silvering. Abrasives & lubricants. Cleaning fluids. HSS METRIC TWIST DRILLS A quality high speed
More informationFlexi-Flange Fiber. Instruction Book for Flexi-Flange Fiber Posts IMPORTANT: Read pages 7 through 12 for Technique first. ESSENTIAL DENTAL SYSTEMS
ESSENTIAL DENTAL SYSTEMS IMPORTANT: Read pages 7 through 12 for Technique first. Caution: Federal law restricts this device to sale by or on the order of a licensed dentist. Flexi-Flange Fiber Instruction
More informationAdjustable Dumbbells selection
We take the hassle out of ordering online and importing into Bermuda... We will get it for you!!!!!! Adjustable Dumbbells selection Bowflex SelectTech 1090s DumbBells $1,110.00 delivered Each dumbbell
More informationOPTIONAL/ADDITIONAL INSTRUMENTS
20 Elevated 6320-36-22 20 Elevated Rim Liner, 36mm OD x 22mm ID 6320-80-22 20 Elevated Rim Liner, 80mm OD x 22mm ID 6320-42-26 20 Elevated Rim Liner, 42mm OD x 26mm ID 6320-80-26 20 Elevated Rim Liner,
More informationC6L/C120L Lockbolt Grade 5.8/8.8
T: +44 (0) 1562 513910 F: +44 (0) 1562 69666 E: sales@rivco.co.uk W: www.rivco.co.uk Vibration Resistant Provides total resistance to vibratory loosening giving greataer reliability in service. 6L/120L
More informationThe CerviFix System. Including the StarLock Components. CerviFix Clamp and Screw. StarLock Clamp and Screw
The CerviFix System Including the StarLock Components CerviFix Clamp and Screw StarLock Clamp and Screw The CerviFix System The CerviFix System is a comprehensive set of implants, including clamps, screws,
More informationRATCHETS RATCHET ACCESSORIES DENTAL PRODUCTS PRODUCT CATALOG A company of the KLINGEL GROUP
RATCHETS RATCHET ACCESSORIES DENTAL PRODUCTS PRODUCT CATALOG 0 A company of the KLINGEL GROUP Contents Universal ratchet without torque function General information All ratchets are available with different
More informationTrilogy Acetabular System
Trilogy Acetabular System Surgical Technique Versatility in a proven design Trilogy Acetabular System 1 Trilogy Acetabular System Surgical Technique Table of Contents Acetabular Reaming 2 Component Sizing
More informationTrilogy Acetabular System
Trilogy Acetabular System Surgical Technique Versatility in a proven design Trilogy Acetabular System 1 Trilogy Acetabular System Surgical Technique Table of Contents Acetabular Reaming 2 Component Sizing
More informationHARDINGE WORKHOLDING. HCAC Collet Adaptation Chucks
HARDINGE WORKHOLDING HCAC Collet Adaptation Chucks 800-843-8801 www.hardinge.com Hardinge HCAC Collet Adaptation Chucks Why would I want to use collets on my jaw-chuck lathe? To Increase Productivity over
More informationTriathlon TS Knee System. Surgical Protocol
Triathlon TS Knee System Surgical Protocol Triathlon TS Knee System Surgical Protocol Table of Contents Acknowledgments..........................................................2 Exposure...................................................................4
More informationOPERATIVE TECHNIQUE SKS Total Knee Replacement
OPERATIVE TECHNIQUE SKS Total Knee Replacement Femoral preparation A40577 1 2 5 1: Alignment rod A30049 + A30124 2: Centromedullary rod A40224 4: T-handle A40232 6: Femoral measuring device A40411 + A40414
More informationIntramedullary Nail Systems
Intramedullary Nail Systems TianJin ZhengTian Medical Instrument Co., td. A Company of NATON Medical Group Facility Add: East of Guihuazhi oad, West of Jingyi oad, Airport Economic Zone, Tianjin, 0008,
More informationTrade-In / Trade-Up Price List
IR100615 Barbell Rack,57inx32inx31in Barbell Rack,57inx32inx31in 82.00 $ 347.03 310 IR101066A Storage Rack,3+2 Tier. High grade steel pipe with 3mm thick for better load-bearing. Perfect design for mass
More informationBowflex Home Gym- PR1000
Bowflex Home Gym- PR1000 Prepared for Bowflex Prepared by Christine Pfeiffer April 29, 2013 Table of Contents Table of Contents... iii Introduction... 1 Warnings/Preparation Before Assembly... 3 Basic
More information1 Service factor Determine the required service factor from tables 9 and 10 on pages 87 and 88.
SKF Couplings SKF Flex Couplings SKF Flex Couplings are designed to accommodate misalignment and shock loads and dampen vibration levels. These easy to install, maintenance-free couplings are available
More informationcontents the smarter case approach reasons to choose simplyintegrated 5 system overview 6 ordering 7 mount-free implants 8-9
simply fixed angled contents the smarter case approach 3-4 3 reasons to choose simplyintegrated 5 system overview 6 ordering 7 mount-free implants 8-9 SMART PACK prosthetics 10 simplyinteractive details
More informationTrilogy Acetabular System
Trilogy Acetabular System Surgical Technique Versatility in a proven design Trilogy Acetabular System 1 Trilogy Acetabular System Surgical Technique Table of Contents Acetabular Reaming 2 Component Sizing
More informationOFFICE DIAL BEZEL, 18" With brass liner, 18" flange and fitted glass. Screw on with four quarter point
7. 1. Bezels & Glass Bezels & Glass. Rough edged round and square glass. Round and oval domes with bases. BRASS BEZEL FOR AMERICAN CLOCKS The size is the outside diameter. Because the brass is thin, the
More informationAK FIXATOR SYSTEM AK1
AK FIXATOR DESCRIPTION AK FIXATOR SYSTEM AK1 UNISORB 'S Model AKII Agile Fixator Mount has been developed specifically to meet industry's demand for a cost effective, truly "agile," machinery installation
More informationZimmer NexGen MIS Tibial Component. Cemented Surgical Technique IMAGE TO COME
Zimmer NexGen MIS Tibial Component Cemented Surgical Technique IMAGE TO COME Zimmer NexGen MIS Tibial Component Cemented Surgical Technique 1 Zimmer NexGen MIS Tibial Component Cemented Surgical Technique
More informationPatella Planing System
REFERENCE GUIDE AND SURGICAL TECHNIQUE Patella Planing System SPECIALIST INSTRUMENTS AN ONLAY PATELLA PREPARATION SYSTEM TECHNIQUE FOR PRIMARY PATELLAR RESURFACING The Specialist 2 Patellar Planer System
More informationSwishPlant. SwishPlant System Catalog. 4.8mmD mmD. 4.8mmD mmD. 3.7mmD mmD. 6.5mmD
SwishPlant System Catalog ------------ 4.1mmD ------------ 3.7mmD ------------ 3.3mmD SwishPlant 6.5mmD ------------ 6.5mmD ------------ 5.7mmD Table of Contents SwishPlant Fixture Mount Packaging Page
More informationLegacy TM. System Catalog. Legacy TM 1 Legacy TM 2 Legacy TM 3 Legacy TM 4
Legacy TM System Catalog Legacy TM 1 Legacy TM 2 Legacy TM 3 Legacy TM 4 Table of Contents Page # Design, Surface & Dimensions 1-5 6-13 Legacy TM 1, Legacy TM 2, Legacy TM 3 & Legacy TM 4 s Labeling &
More informationBAK/C Cervical Anterior Interbody Fusion System
Surgical Technique BAK/C Cervical Anterior Interbody Fusion System The Comfortable Choice for Cervical Fusion BAK/C Cervical Surgical Technique 1 The BAK/C Cervical Fusion System is an alternative to conventional
More informationBiomet Large Cannulated Screw System
Biomet Large Cannulated Screw System s u r g i c a l t e c h n i q u e A Complete System for Simplified Fracture Fixation 6.5mm & 7.3mm The Titanium, Self-drilling, Self-tapping Large Cannulated Screw
More informationMultipower. User Guide E S S E N T I A L S T R E N G T H
E L E M E N T E S S E N T I A L S T R E N G T H User Guide The identification plate of and manufacturer, affixed to the frame behind the barbell rack, gives the following details: A B C D E Name and address
More informationWILL FIT THESE CABLES APPROXIMATE DIAMETER AWG CONDUCTORS AWM " -.187" ".375".330".406"
WIRE MNGEMENT STRIN RELIEF USHINGS STRIGHT-THRU STRIN RELIEF USHINGS For Round ables DESIGNTION WILL FIT THESE LES WG PPROXIMTE DIMETER PRT NUMER LK MXIMUM PNEL HOLE DIMETER "" NTI- ROTTION WM ----.15"
More informationPRIMARY POROUS PATELLA WITH TRABECULAR METAL. Surgical Technique
PRIMARY POROUS PATELLA WITH TRABECULAR METAL Surgical Technique 1 SURGICAL TECHNIQUE FOR NEXGEN PRIMARY POROUS PATELLA * WITH TRABECULAR METAL CONTENTS PREPARE THE PATELLA............... 2 Patella Reamer
More informationWIRE MANAGEMENT STRAIN RELIEF BUSHINGS STRAIGHT-THRU STRAIN RELIEF BUSHINGS WIRE MANAGEMENT, STRAIN RELIEFS. For Round Cables
WIRE MNGEMENT STRIN RELIEF USHINGS For Round ables STRIGHT-THRU STRIN RELIEF USHINGS DESIGNTION WILL FIT THESE LES WG PPROXIMTE DIMETER PRT NUMER LK MXIMUM PNEL HOLE DIMETER "" NTI- ROTTION WM ----.15"
More informationSurgical Technique. Proximal Humerus Locking Plate
Surgical Technique Proximal Humerus Locking Plate PERI-LOC Upper Extremity Locked Plating System 3.5mm & 4.5mm Proximal Humerus Locking PlatesCatalog Infor Table of Contents Introduction.........................................................2
More informationDHS Plate 135º. DHS Platte 135º
Section of hip fixation plate compression system DHS Plate 3º DHS Platte 3º Plaque de DHS 3º Indication : The compression hip plate is primarly indicated for intertrochanteric fractures. However, it can
More informationDistal Cut First Femoral Preparation
Surgical Technique Distal Cut First Femoral Preparation Primary Total Knee Arthroplasty LEGION Total Knee System Femoral preparation Contents Introduction...3 DCF femoral highlights...4 Preoperative planning...6
More informationCorrection System. Surgical Technique
Nextra Hammertoe Correction System Surgical Technique Maximized Bone Purchase* Stable and Secure Phalanx Optimized Screw Design Adjustable Bone-to-Bone Apposition Progressive Ratchet Tightening Mechanism
More informationRUBBER WATERBLAST HOSES
up to 15, PSI (1 Bar) RUBBER WATERBLAST HOSES These high pressure hose assemblies combine rugged construction, dependability and safe performance. Designed specifically for waterblast applications Lightweight
More informationCorrection System. Surgical Technique
Nextra Hammertoe Correction System Surgical Technique Maximized Bone Purchase* Stable and Secure Phalanx Optimized Screw Design Adjustable Bone-to-Bone Apposition Progressive Ratchet Tightening Mechanism
More informationTRIAL COMPONENTS SURGICAL TECHNIQUE REAMING THE TIBIAL AND FEMORAL INTRAMEDULLARY CANAL
Ref. no. 99.27.2TRIALS TRIAL COMPONENTS SURGICAL TECHNIQUE CLINICAL INDICATION This technique is indicated in the case of revisions with significant bone loss when minimal or any resection of bone is required.
More informationSwissPlant Prosthetic Catalog. SwissPlant
SwissPlant Prosthetic Catalog Contoured Snap-On Angled Contoured Ball Attachment Gold/Plastic Castable Locator Attachment Plastic Temporary Screw Receiving Plastic Non-Engaging Castable Narrow Titanium
More informationHAMMER STRENGTH MTSAB ABDOMINAL CRUNCH. Customer Support Services PARTS LIST. Page 1
HAMMER STRENGTH MTSAB ABDOMINAL CRUNCH Page Customer Support Services PARTS LIST Contents PAGE COMPONENT ASSEMBLY COMPONENT ASSEMBLY LEGEND RIGHT SIDE ASSEMBLY RIGHT SIDE ASSEMBLY LEGEND LOWER ARM ASSEMBLY
More informationNEMA FRAME DIMENSIONS* FOOT-MOUNTED AC MACHINES
32 NEMA FRAME DIMENSIONS* FOOT-MOUNTED AC MACHIN KEYSEAT S 2F BA "H" DIA. 4 - HOL E E D V N-W U R * Dimensions in inches Frame Keyseat DIGNATION D E 2F BA H** U N-W V min R min S 42 2.62 1.75 1.69 2.06
More information(12) Patent Application Publication (10) Pub. No.: US 2014/ A1
(19) United States (12) Patent Application Publication (10) Pub. No.: US 2014/0287886 A1 Patti US 20140287886A1 (43) Pub. Date: Sep. 25, 2014 (54) (71) (72) (21) (22) (60) PROTECTOR FOR EXERCISE BAR Applicant:
More informationINTRAMEDULLARY NAILING TIBIA AND FEMUR 1.3 TIBIAL AND FEMORAL NAILING FEMORAL NAILING WITH RETROGRADE INSERTION IMPLANTS AND OPERATING MANUAL
1.3 TIBIA AND FEMORA NAIING FEMORA NAIING WITH RETROGRADE INSERTION IMPANTS AND OPERATING MANUA INTRAMEDUARY NAIING TIBIA AND FEMUR Medical Products Manufacturing and Trading td. General informations
More informationIntroduction. Table of Contents
Introduction Centurion NDT, in its continual effort as a leader in NDT technology, has designed a series of transducer products to service the Ultrasonic testing industry. These products contain the latest
More informationinsafe System - Directions for Use
insafe System - Directions for Use 1. Sharps Container Fitting 1a Remove protective covers from the adhesive pads. 1b Position the base on a smooth clean worktop and push down firmly to secure. 1c Slide
More informationBasic Trocar System. Basic transbuccal instrumentation system for simplified intraoral plate and screw application.
Basic Trocar System. Basic transbuccal instrumentation system for simplified intraoral plate and screw application. Lightweight, ergonomic design Allows placement of three screw sizes Size-specific, colorcoded
More informationTechnique Guide. DHS Blade. For osteoporotic bone.
Technique Guide DHS Blade. For osteoporotic bone. Table of Contents Introduction Features and Benefits 2 Indications and Contraindications 4 Clinical Cases 5 Surgical Technique Implantation 6 Implant
More informationLongevity Offset and Oblique Liners. Surgical Technique
Longevity Offset and Oblique Liners Surgical Technique Longevity Offset & Oblique Liners Surgical Technique 1 Introduction Complete Acetabular System Joint instability is an important issue in both primary
More informationTrochanter Stabilization Plate for DHS Implants
Extends DHS Plate Construct to Help Stabilize Greater Trochanter Trochanter Stabilization Plate for DHS Implants Surgical Technique Table of Contents Introduction Trochanter Stabilization Plate for DHS
More informationSurgical procedure. METS Modular Proximal Humerus
Surgical procedure METS Modular Proximal Humerus Surgical Procedure Contents 1.0 2.0 3.0 4.0 Device information 2 3 1.1 Product overview 1.2 Indications 1.3 bsolute contra-indications 1.4 Relative contra-indications
More informationSurgical Technique. Clavicle Locking Plate
Surgical Technique Clavicle Locking Plate PERI-LOC Locked Plating System Clavicle Locking Plate Surgical Technique Table of Contents Introduction...2 Indications...3 Plate Features...3 Patient Positioning...4
More informationZimmer NexGen Trabecular Metal Tibial Tray
Zimmer NexGen Trabecular Metal Tibial Tray Surgical Technique Zimmer NexGen Trabecular Metal Tibial Tray Surgical Technique Give Bone A Solid Hold Zimmer NexGen Trabecular Metal Tibial Tray Surgical Technique
More informationSurgical Technique International Version. Clavicle Locking Plate
Surgical Technique International Version Clavicle Locking Plate PERI-LOC Upper Extremity Locked Plating System Clavicle Surgical Techniquefor Table of Contents Introduction........................................................2
More informationGSG YOUR SOURCE FOR SPECIAL GAGES MORE TECHNICAL INFORMATION AVAILABLE AT GSG WEB SITE
GASTONBURY ggg NEED IT FAST REDINE SERVICE AVAIABE OVER 4,000 THREAD ITEMS IN STOCK WWW.AGE.COM YOUR SOURCE FOR SPECIA GAGES MORE TECHNICA INFORMATION AVAIABE AT WEB SITE Table of Contents Index Products
More informationCHARLOTTE. 7.0 Multi-Use Compression Screw System SURGICAL TECHNIQUE
CHARLOTTE 7.0 Multi-Use Compression Screw System SURGICAL TECHNIQUE Contents Chapter 1 1 Chapter 2 2 Chapter 3 3-9 Chapter 4 10-12 Appendix A 13-14 Design Rationale Screw Behavior Surgical Technique Procedure
More informationACL Reconstruction for BTB Grafts
Transtibial ACL Reconstruction System for BTB Grafts Surgical Technique Designed in conjunction with John C. Garrett, M.D., Atlanta, GA ACL Reconstruction for BTB Grafts Reference Anatomical Constants
More informationOSS Orthopedic Salvage System Compress Device. Surgical Technique
OSS Orthopedic Salvage System Compress Device Surgical Technique Table of Contents Quick Reference Guide... 2 Device Description... 3 Resection... 4 No Face Adapter Provisional Construct... 4 Canal Preparation...
More informationPediatric LCP Plate System. For osteotomies and fracture fixation of the proximal and distal femur.
Pediatric LCP Plate System. For osteotomies and fracture fixation of the proximal and distal femur. Angular stability Intraoperative correction and flexibility Universal design Indications The Pediatric
More informationPILLAR P E E K S P A C E R S Y S T E M
PILLAR SA P E E K S P A C E R S Y S T E M PILLAR SA P E E K S P A C E R S Y S T E M 1 IMPLANT SIZES 2 3-6 7-8 8 DIMENSIONS / INSTRUMENTS INSTRUMENTS, PART NUMBERS, GRAFT VOLUME & HEIGHTS ANTERIOR & POSTERIOR
More informationService Set Training Presentation English. André Breisinger BU Prosthetics
Service Set Training Presentation English André Breisinger BU Prosthetics Intended use The Service Set is intended for restoring a Straumann implantabutmentsystem, where the prosthetic component is damaged
More informationQUALITY WEATHERPROOF ELECTRICAL EQUIPMENT
MIDWEST ELETRI PRODUTS, IN IR ONDITIONIN DISONNETS Metallic & Non-Metallic QULITY WETHERPROOF ELETRIL EQUIPMENT / DISONNETS P065P1 PPLITION INFORMTION rticle 440 of the National Electrical ode applies
More informationSteri-Oss Compatible Components
Original Non-Hex & Direct To The Implant Impression opings nalogs IMPRESSION OPING To Fit Implant The impression coping for the Steri-Oss Original Non-Hex implant is used to take an impression of the implant
More informationIntra Medullary Interlocking Nailing System
Intra Medullary Interlocking Nailing System www.orthotraumaint.co.uk Interlocking Intra Medullary Nails for lower extremity fractures INDICATIONS: Stable and unstable Femoral Shaft fractures Femur Nailing
More informationMedium External Fixator Pediatric Femoral Shaft Frame. Using medium multi-pin clamps.
Medium External Fixator Pediatric Femoral Shaft Frame. Using medium multi-pin clamps. Technique Guide Part of the Medium External Fixation System MRI Information Synthes Medium External Fixation devices
More informationMedium External Fixator Humeral Shaft Frame. Modular frame for upper extremity use.
Medium External Fixator Humeral Shaft Frame. Modular frame for upper extremity use. Technique Guide Part of the Medium External Fixation System MRI Information Synthes Medium External Fixation devices
More informationSP-300 OWNER S MANUAL
OWNER S MANUAL Product may vary slightly from the item pictured due to model upgrades Read all instructions carefully before using this product. Retain this owner s manual for future reference. NOTE: This
More informationHigh Grade Universal Testing Machines
ALTENMARKT 180, 8280 FÜRSTENFELD TEL.: +43 3382-54060-0 FAX: -27 AUSTRIA, EUROPE WWW.MESSPHYSIK.COM BETA Series High Grade Universal Testing Machines FIELD PROVEN SOLUTIONS - Application examples BETA
More informationExternal Skeletal Fixation (ESF)
External Skeletal Fixation (ESF) Technique for fracture repair in animals Introduction External Skeletal Fixation is a versatile and effective technique for fracture repair in animals, rigidly stabilizing
More informationNEW NEW. An Extended Solution for Narrow Ridges
NEW mm NEW An Extended Solution for Narrow Ridges NICE System: An Extended Solution for Narrow Ridges Quality Alpha-Bio Tec presents an advanced new NARROW implant solution for narrow alveolar ridges and
More informationPEEK SS Columns & Guard Columns
PEEK SS Columns & Guard Columns ~ Stainless Steel Analytical Columns ~ PEEK Columns ID 2.1, 4.0, 4.6 & 7.5 mm ~ Jour-Guard Cartridges Stainless Steel or PEEK ~ Stainless Steel End Fittings 1/4 OD Columns
More informationAnatomical Shoulder System
Anatomical Shoulder System Adjustable. Convertible. Compatible. Anatomical Shoulder System by Zimmer This unique system is like an individually produced prosthesis specifically designed for each patient.
More informationSurgical Technique. Distal Humerus Locking Plate
Surgical Technique Distal Humerus Locking Plate PERI-LOC Locked Plating System Distal Humerus Locking Plate Surgical Technique Table of Contents Introduction...2 Indications...3 Plate Features...3 Patient
More informationSurgical Technique. 3.5mm and 4.5mm Lateral Proximal Tibia Locking Plates
Surgical Technique 3.5mm and 4.5mm Lateral Proximal Tibia Locking Plates PERI-LOC Periarticular Locked Plating System 3.5mm and 4.5mm Lateral Proximal Tibia Locking Plate Surgical Technique Contents Product
More informationSection 25 NT VT4 Spare Parts Documentation
Section 5 NT VT4 Spare Parts Documentation The spare parts documentation is organised as follows: 1. A comprehensive list of all spare parts (the parts are schematically / with exploded diagrams number
More informationSP450 OWNER S MANUAL
OWNER S MANUAL Product may vary slightly from the item pictured due to model upgrades Read all instructions carefully before using this product. Retain this owner s manual for future reference. NOTE: This
More informationExpansion screws. Perfect in form, function and design.
EN Expansion screws. Perfect in form, function and design. Contents. 08 Standard screws. 10 Special screws. 14 Processing instructions removable appliance technique. hyrax screws. Variety screws. Processing
More informationLaboratory Ergonomics Self- Evaluation Checklist. Standing & Sitting Benches Yes No Change/Modification Comments
Standing & Sitting Benches Yes No Change/Modification Comments 1. Is the height of the bench appropriate for the work performed? A. Work should be positioned close to elbow height (36-40 ) B. Work should
More informationANATOMIC SURGICAL TECHNIQUE. 5 in 1. Conventional instrumentation 07/11/2013
ANATOMIC SURGICAL TECHNIQUE 5 in 1 Conventional instrumentation PRO.GB.933/1.0 Octobre 2013 2 Tibial step 3 Intramedullary technique - Based on the preoperative plan, drill the medullary canal with the
More informationThe Bowflex Conquest Home Gym Assembly Instructions
The Bowflex Conquest Home Gym Assembly Instructions P/N 001-6841 Rev C (04/2007) Table of Contents Before You Start... 2 Tools You Will Need / Hardware Chart... 3 Parts List... 4 Weight and Multi-carton
More information28 Surgical Technique
Surgical Technique 10 12 14 16 18 20 22 24 28 26 Technique described by James L. Guyton, MD Campbell Clinic Memphis, Tennessee James W. Harkess, MD Campbell Clinic Memphis, Tennessee David G. LaVelle,
More informationGraftLink All-Inside ACL
Surgical Technique GraftLink All-Inside ACL GraftLink All-Inside ACL Reconstruction with ACL TightRope ABS GraftLink Minimally Invasive ACL Reconstruction The GraftLink technique provides the ultimate
More informationA novel cementless option. Zimmer NexGen Trabecular Metal Primary Patella Surgical Technique
A novel cementless option Zimmer NexGen Trabecular Metal Primary Patella Surgical Technique Zimmer Trabecular Metal Primary Patella 1 Zimmer NexGen Trabecular Metal Primary Patella Surgical Technique
More informationSystem. Humeral Nail. Surgical Technique
System Humeral Nail Surgical Technique Contents IMPLANT FEATURES 2 1. INDICATIONS 3 2. PRE-OPERATIVE PLANNING 3 3. PATIENT POSITIONING & FRACTURE REDUCTION 3 4. INCISION 4 5. ENTRY POINT 4-6 6. PROXIMAL
More informationPart 2: Internal Tri-Channel Connection. Nobel Biocare Compatible Components. Tri-Channel Internal Connection Implants
Select Part 2 Internal Tri-Channel Connection Replace Select NobelSpeedy Replace NobelReplace and compatible implants listed below Select Part 2 contains only the Tri-Channel Internal Connection compatible
More informationInterActive System Catalog
InterActive System Catalog Table of Contents Page # Implant Design & Surface 1 2-3 2 Implant Dimensions Fixture Mount & IQity Impression Technique 3 4-5 InterActive Implants Selection Chart 10-11 6-7 8
More information2.7 mm/3.5 mm LCP Distal Fibula Plate System. Part of the Synthes locking compression plate (LCP) system.
2.7 mm/3.5 mm LCP Distal Fibula Plate System. Part of the locking compression plate (LCP) system. Anatomically contoured Multiple screw options for fixedangle support Coaxial holes minimize screw head
More informationSide Channel R ing Blower
Side Channel R ing Blower ------------------------------------- INSTRUCTION MNUL ------------------------------------ RB20../ 30../ 40../ 50../ 60 / 80.. SERIES CONTENT PGE 1. SFETY REQUIREMENT... 1 2.
More informationPRODUCT SCHEDULE FOR CERTIFICATE CE JRI ORTHOPAEDICS LIMITED
HIP STEM (Class III) Active Stem Active H-AC Stem / 09mm - 16mm Cemented Hemiarthroplasty (formally LOL 127) Cemented Hemiarthroplasty Stem / X-X-Small - Large Cemented Hemiarthroplasty Stem - Long / Small
More information