Steri-Oss Compatible Components

Transcription

1 Original Non-Hex & Direct To The Implant Impression opings nalogs IMPRESSION OPING To Fit Implant The impression coping for the Steri-Oss Original Non-Hex implant is used to take an impression of the implant body. The flat sided titanium impression coping transfers the thread timing. When the UM insert is used as a tissue extension, the standard line of UM components are indicated. Small Diameter Steri-Oss Non-Hex (Flat Top) Implant Medium Diameter Steri-Oss Non-Hex (Flat Top), also fits 3.5 and 4.0 Non-Hex Implant Description Order # Order # Impression oping To Fit Steri-Oss Original Non-Hex Implant Impression oping Non-Hex () IMPLNT NLOGS To Fit Implant The brass analogs are used for the fabrication of a master model. They replicate the fitting surface and the internal threads of the implant body. Description Order # Order # Implant ody nalog, rass () Part 3: onnection opyright 2007 ttachments International, Inc., San Mateo, 230

2 Original Non-Hex & Direct To The Implant UL ylinder, Screw & Plug UL, YLINDER, SREW & PLUG (SP) The UL abutment system is the most widely used restorative concept for single or bridge type restorations. The UL for Steri-Oss allows only bridge (non-hex) and bar type overdenture possibilities. Each UL SP includes the castable plastic abutment (cylinder),.050" hex screw, and the patented occlusal plug. The UL abutment is also referred to a SP, ylinder, Screw and Plug. For Steri-Oss Hex-Loc implant components refer to the ranemark / UL section of this manual. Small Diameter Steri-Oss Non-Hex (Flat Top) Implant Medium Diameter Steri-Oss Non-Hex (Flat Top), also fits 3.5 and 4.0 Non-Hex Implant Description Order # Order # UL ylinder, Screw & Plug (SP) UL, Non-Hex cylinder,.050" hex screw & plug, () UL, Non-Hex cylinder,.050" hex screw & plug, () PRTS UL, Plastic butment (ylinder) Only UL, Screw Only, Titanium.050" Hex (fits both & ) USE WITH Impression opings To Fit Implant Implant ody nalog, rass TOOLS Hex Drivers for all.050" Screws, Healing aps, and Guide Pins Hex Lab Driver Hex DDS.050" Driver12mm, Long For Steri-Oss Hex-Loc compatible components see Steri-Oss Part 3 External For Steri-Oss -4.5 Hex-Loc compatible components, refer to the ranemark Part 1 RP / UL of this manual. For Steri-Oss 5.0 Hex-Loc compatible components, refer to the Steri-Oss Part 3 External Replace 5.0 section of this manual. opyright 2007 ttachments International, Inc., San Mateo, 231

3 Original Non-Hex & Direct To The Implant Direct Titanium Posts DIRET TITNIUM SREW-IN POSTS The direct titanium abutment post screws into the implant body and may be secured with Teflon tape or thread adhesive. The tapered posts can be altered like a preparation. Grinding on the titanium post should be done outside of the oral cavity. Fabricate a soft tissue model whenever preparations are made in the laboratory. If the final restoration is to be retrievable, then consider set screws. die will refine the cast threads. Small Diameter Steri-Oss Non-Hex (Flat Top) Implant Medium Diameter Steri-Oss Non-Hex (Flat Top), also fits 3.5 and 4.0 Non-Hex Implant Description Dimensions Order # Order # Direct Titanium Posts () Direct Titanium Posts 2.0mm x 12mm N/ Direct Titanium Posts 3.0mm x12mm N/ USE WITH: Impression oping Implant ody nalog Note: Dimension refers to gingival vertical section before taper begins, overall height is 12mm. For Steri-Oss Hex-Loc compatible components see Steri-Oss Part 3 External For Steri-Oss -4.5 Hex-Loc compatible components, refer to the ranemark Part 1 RP / UL of this manual. For Steri-Oss 5.0 Hex-Loc compatible components, refer to the Steri-Oss Part 3 External Replace 5.0 section of this manual. Part 3: onnection opyright 2010 ttachments International, Inc., urlingame, 235

4 Original Non-Hex & Indirect omponents UM System UM UTMENT The UM butment (tissue extension), like the PME butment, is an intermediate component made to fit between the implant and the restoration. The UM has a standardized fitting surface, which allows the UM restorative components to be interchangeable regardless of the implant type. The UM Healing ap protects the UM until the restoration is delivered. The ridge Tapered UM Impression oping trans- UM OMPONENTS fers the UM position while the Hex UM Impression oping transfers the hex orientation of the UM butment. The UM nalog replicates the UM for the model. The UM Hex or Non-Hex Plastic ylinders are used to make frameworks for bridges or bars. The UM L System is used for a passive fit technique. For restorations the fit directly to the implant refer to the Direct UL System for the specific implant type. D E E F Healing ap Impression oping Impression oping nalog SP SP L ylinder Tapered 1 piece Hex 2 piece rass Hex yl, Hex screw Non-Hex yl, Hex Screw Description Dimensions Intended Use Order # Order # D E F UM butment Tissue Extension Height Tissue Extension / butment UM, butment H=1.5mm N/ UM, butment H=2.0mm UM, butment H=3.0mm UM, butment H=4.0mm UM, butment H=5.0mm UM, butment H=6.0mm UM, butment H=7.0mm N/ omponents To Fit UM butment / Tissue Extension Healing ap Tissue Healing / Management One Thread Size Fits ll UMs UM Healing ap H=2.0mm ø=4.5mm UM Healing ap H=4.0mm ø=4.5mm UM Healing ap H=6.0mm ø=4.5mm Impression oping Impression Taking / Transfer Timing UM Impression oping Tapered, one piece UM Impression oping Hex with.050" Hex Guide Pin, two piece nalog Model Fabrication UM nalog, rass SP (ylinder, Screw & Plug) rown & ridge / ar Restorations UM Hex ylinder (blue), Ti.050" Hex Screw & Occlusal Plug UM Hex ylinder (blue), Ti Slot Screw & Occlusal Plug UM Non-Hex ylinder (yellow), Ti.050" Hex Screw & Occlusal Plug UM Non-Hex ylinder (yellow), Ti Slot Screw & Occlusal Plug L ylinder (Passive Fit) ars / Fixed Detachable UM L ylinder, Ti.050" Hex Screw, Waxing Sleeve & Spacer NOTE: Slot Screws (# ) may be ordered separately. PRTS (Refer to UM Section of Manual for complete parts & tools) UM.050" Hex Titanium Screw, only UM, Short ar ylinder only, Red opyright 2007 ttachments International, Inc., San Mateo, 233

5 Original Non-Hex & Indirect omponents PME System PME UTMENT The PME butment (tissue extension), like the UM butment, is an intermediate component made to fit between the implant and the restoration. The PME, a tissue extension made by Steri- Oss, fits directly to the implant. The non-hex cylinder fits the PME and is fastened with the titanium.050" hex screw. Ti healing cap and a 1-piece Ti tapered impression coping are now available. Two analogs are available, a stainless steel and a copper analog. The copper PME analog may be used with EDM Spark Erosion process. For restorations the fit directly to the implant refer to the Direct UL System for the specific implant type. OMPONENTS TO FIT PME D Impression oping nalog, SS or opper ylinder & Screw Description Dimensions Intended Use Order # Order # omponents To Fit PME butment / Tissue Extension Healing ap Tissue Healing / Management PME Healing ap, Titanium H=3.0mm ø=4.5mm Impression oping Impression Taking / Transfer Timing PME Tapered One Piece Impression oping, Titanium nalog Model Fabrication PME nalog, Stainless Steel PME nalog for EDM Spark Erosion only, opper Non-Hex ylinder & Screw rown & ridge / ar Restorations PME Non-Hex Plastic ylinder &.050" Hex Screw PME Non-Hex Plastic ylinder only PME.050" Hex Screw only INSERTION TOOLS IO-TORQ Tip ORS / D Hex 2.5mm IO-TORQ Wrench 30 N/cm IO-TORQ Socket IO-TORQ dapter for Nobel iocare Wrench LT/R Latch Tip ORS / D Hex 2.5mm LT/R R Hand Driver LT/R R Handle / Socket D Part 3: onnection opyright 2007 ttachments International, Inc., San Mateo, 234

6 Original Non-Hex & Dalla ona & ORS Overdenture ttachments OVERDENTURE STUD TYPE TTHMENTS Three types of overdenture attachments are most commonly used to directly screw into the implant the Dalla ona, the ORS, (O-Ring system) and the Locator (listed on separate page). onnectors are made of titanium. Dalla ona male, ORS male and Locator female are sold separately by tissue height. The D Female Kit includes 1 adjustable female, 1 spacer and 1 brass analog. The ORS Female Kit includes 1 gold plated retainer ring, 3 white final & 3 red processing O-Rings and 1 brass analog. Locators are listed on separate page. D D ORS ORS or llegro Implant Female Kit Optional for D Small Diameter Steri-Oss Non-Hex (Flat Top) Implant Medium Diameter Steri-Oss Non-Hex (Flat Top), also fits 3.5 and 4.0 Non-Hex Implant Description Tissue Height Order # Order # Dalla ona () Dalla ona, male only H=1mm Dalla ona, male only H=2mm Dalla ona, male only H=3mm Dalla ona, male only H=4mm Dalla ona, male only H=5mm H Dalla ona, male only H=6mm Dalla ona, male only H=7mm N/ Dalla ona, Implant Ti Female Kit, includes Female, Spacer & nalog llegro, Implant Female Kit (option for Dalla ona female) () includes Metal Housing, 4 Females, Spacer & rass nalog ORS, O-Ring System () ORS, male only H=1mm N/ ORS, male only H=2mm N/ ORS, male only H=3mm ORS, male only H=4mm ORS, male only H=5mm H ORS, male only H=6mm ORS, male only H=7mm N/ ORS, Implant Female Kit includes Retainer Ring, nalog & 3 red processing & 3 white final O-Rings PRTS & TOOLS For complete list of Dalla ona, llegro & ORS Parts and Tools refer to next page. For Locators for Steri-Oss Non-Hex System refer to pages opyright 2010 ttachments International, Inc., urlingame, 242

7 Steri-Oss Original Non-Hex & ompatible omponents Dalla ona, ORS & llegro Parts & Tools for Overdenture Stud Type ttachments OVERDENTURE STUD TYPE TTHMENT PRTS & TOOLS Two types of overdenture attachments are most commonly 1 spacer and 1 brass analog. The llegro Female Kit is used to directly screw into the implant the Dalla ona and offered as an option for the Dalla ona System. The ORS the ORS, (O-Ring system). onnectors are made of titanium. Female Kit includes 1 gold plated retainer ring, 3 white final & Dalla ona males and ORS males are sold separately by tissue height. The D Female Kit includes 1 adjustable 3 red processing O-Rings and 1 brass analog. female, PRTS Description Dimensions Order # DLL ON FOR IMPLNTS Dalla ona, Implant Female Kit: includes Female, Spacer & rass nalog Dalla ona, Resilient Female, Gold FH=3.1mm Dalla ona, Resilient Female, Titanium FH=3.4mm Dalla ona, Resilient Female, Plastic (4) FH=3.5mm Dalla ona Hex nalog, rass (2) Dalla ona Hex Spacer, rass (2) PV Ring (6), replacement ring for Dalla ona female LLEGRO FOR IMPLNTS llegro, Implant Female Kit (option for Dalla ona female) includes Metal Housing, 4 Females, Implant Spacer & rass nalog ORS FOR IMPLNTS ORS, Retainer Rings (6) H=2.0mm ø=5.1mm ORS, ombo O-Rings: 6 blue, 6 red (processing), 6 wt, 6 blk Outside ø=4.5mm Inside ø=1.4mm ORS, Implant Female Kit: includes Retainer Ring, rass nalog and 3 red processing & 3 white final O-Rings O-Ring Hex nalog, rass (2) TOOLS IO-TORQ Wrenches, Socket & Driver IO-TORQ Wrench 10 N/cm IO-TORQ Wrench 20 N/cm IO-TORQ Wrench 30 N/cm IO-TORQ Wrench 35 N/cm IO-TORQ Socket IO-TORQ Extension IO-TORQ ORS / Dalla ona Tip/Driver LT/R DRIVER LT/R R Hand Driver LT/R R Handle / Socket LT/ R ORS / Dalla ona Tip Dalla ona ctivating Tool, lue Dalla ona Deactivating Tool, Yellow LLEGRO (for replacement parts see llegro OD section page 99) llegro OD/DE Micro/Regular Insertion Tool Dalla ona ctivating Tool Dalla ona Deactivating Tool Part 3: onnection opyright 2010 ttachments International, Inc., urlingame, 243

8 Original Non-Hex & Overdenture ar Restorations Insertion Drivers IDEL R SYSTEM There are numerous options for implant bar restorations available today. To simplify your search, we have selected the most proven and popular systems on this page. For a complete listing of all bar system components, refer to the ar and lip Quick Reference harts. Most implant bar restorations involve from 2 to 5 implants. The ideal implant bar system incorporates a bar and retentive clips in the anterior section and locking pin attachments distally for support and stability. The Hader-EDS ar Master kit is the preferred choice. The M Gold lips may be used as an alternative. The locking SwissLoc NG is the preferred distal attachment to prevent lift-off and still provide resiliency. The Lew is a viable alternative. For Laser Welding Technique, use only titanium bars and posts. Recommended parts needed for a successful bar restoration. For a complete listing of Ideal ar Restoration parts see ranemark Section. PPM ar 0 degree SwissLoc ttachments Hader-EDS lips Hader-EDS ar Hader-EDS Housing Description Order # HDER-EDS R MSTER KIT Master Kit includes 6 yellow plastic clips, 6 metal housings, 2 seating tools and 2 short plastic bars (50mm) SWISSLO NG TTHMENT SwissLoc NG 4.0 mm *L=4.5mm Housingø=3.4mm Plungerø=1.5mm X SwissLoc NG 6.0 mm *L=6.8mm Housingø=3.4mm Plungerø=1.5mm X SwissLoc NG 7.5 mm *L=8.0mm Housingø=3.4mm Plungerø=1.5mm X PPM PLSTI R PTTERNS (50mm) PPM ar 0 degree (3 short 3.7mm, 3 tall 8.0mm), blue PPM ar 2 degree (3 short 3.7mm, 3 tall 8.0mm), red PPM ar 4 degree (3 short 3.7mm, 3 tall 8.0mm), yellow INSERTION DRIVERS The IO-TORQ (-T) and LT/R Systems were designed to facilitate the insertion of implant components. The IO- TORQ insertion tips may be utilized with the IO-TORQ hand held socket or the IO-TORQ wrenches. The LT/R (latch type) tips are used with right angle handpiece type drivers. IO-TORQ LT / R D E F G Socket Extension Slot Hex ORS UM sht UM long D E F Handle Slot Hex ORS UM Description Order # Order # IO-TORQ LT/R Driver Hand Held Socket / Handle () IO-TORQ Extension () N/ IO-TORQ dapter for Nobel iocare Torque Wrench N/ Slot Tip Short Slot Tip Long () Hex Tip Short Hex Tip Long (D) ORS / DD / PME Tip (E) Locator Tip, Short Locator Tip, Long UM Tip Short (F) UM Tip Long (G) N/ Note: For Slot Screws do not exceed 10 N/cm of torque. opyright 2007 ttachments International, Inc., San Mateo, 237

9 Original Non-Hex & Tools STNDRD DRIVERS, -T WRENHES & LT/ R DRIVER D Description Order # Standard Drivers and FG Drivers DDS.050" Hex Driver () DDS Slot Screwdriver () Lab.050" Hex Driver () Friction Grip Driver (D) IO-TORQ Wrenches & LT / R Driver IO-TORQ Wrench 10 N/cm IO-TORQ Wrench 20 N/cm IO-TORQ Wrench 30 N/cm IO-TORQ Wrench 35 N/cm LT / R Driver REMERS The carbide reamers are used to refine the internal access hole of a castable cylinder. They also refine the seat for the head of the screw. Each carbide reamer and Pin Vise are sold separetly. The Pin Vise will fit all carbide reamers. (E) LPPING TOOLS The Lapping tools are used with diamond polishing paste to refine the fitting surface of the cast cylinder. We recommend that you use it not more than 5-6 times. For superior restorations, you may want to use the 1 micron white diamond lapping paste. (F) Pin Vise Description Order # Reamer, UM butment arbide.0880" (also fits IMZ & Paragon UL ylinders) (requires Pin Vise ) Pin Vise for arbide Reamers " Description Order # Steri-Oss / Integral Lapping Tool and Guide Pin, & UM, Lapping Tool and Guide Pin F Reamer E Part 3: onnection opyright 2007 ttachments International, Inc., San Mateo, 238