Tank Armor SERIES 390. Chemical Resistance. 1, 1, 1-Trichloroethane (Trichloroethane) FC, OC. Aluminum Sulfate (49%) IS, TS, SC, FC,

Transcription

1 Tank Armor SERIES 390 (IS) - Immersion Service (TS) - Temporary Storage (SC) - Secondary Containment (FC) - Frequent Contact () - Occasional Contact (NR) - Not Recommended (NT) - Not Tested (PC) - Please Call *Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only. Chemical 1, 1, 1-Trichloroethane (Trichloroethane) Aluminum Chloride Aluminum Sulfate Aluminum Sulfate (49%) (Alum) Aluminum Sulfate, saturated solution Ammonium Carbonate Ammonium Chloride Ammonium Chloride (50%) Ammonium Hydroxide (10%) Ammonium Hydroxide (20%) Ammonium Hydroxide (30%) Ammonium Hydroxide (5%) Ammonium Nitrate (10%) Ammonium Nitrate (20%) Ammonium Nitrite (56%, 83%) Ammonium Phosphate (46%) Ammonium Sulfamate Ammonium Sulfate Intended Use FC, Page 1 of 11

2 Ammonium Sulfate (50%) Ammonium Sulfate (6%) Ammonium Sulfate (8.3%) Ammonium Thiosulfate (60%) Animal Oil Aqua Ammonia ASTM Reference (Fuels A & C) Aviation Gas Barium Chloride (50%) Barium Hydroxide (50%) Benzene Blood Borax Boric Acid (5%) Boric Acid (dry) Boric Acid Solution (25%) Butric Acid Butyl Acrylate Butylbenzyl Phthalate Calcium Chloride Page 2 of 11

3 Calcium Hydroxide (30%) (Lime Slurry) Calcium Hypochlorite Calcium Hypochlorite (5%) Calcium Sulfate Carbon Tetrachloride Castor Oil Caustic Potash Chlorowax 40 Citric Acid (=< 50%) Cola* Copper Chloride Copper Liquor Copper Nitrate Copper Sulfate (10%) Copper Sulfate (20%) Copper Sulfate (50%) Copper Sulfate (dry) Corn Oil* Crude Oil (Sour) Crude Oil (Sweet) PC Page 3 of 11

4 Cymene Detergent (Chiffon) Diacetone Alcohol Dibutyl Phthalate Diesel Fuel (Diesel Oil, Fuel Oil) Diethanolamine Diethylene Glycol Dioctyl Phthalate Dipropylene Glycol Essential Oil Ethanol (Ethyl Alcohol, Denatured Alcohol) Ethyl Hexyl Acrylate Ethyl Tert-Butyl Ether (ETBE) Ethylene Glycol Ferric Chloride Ferric Sulfate (20%) Formaldehyde (37%) Fruit Juices* Gasohol E10 (10% Ethanol) Gasohol E15 (15% Ethanol) Page 4 of 11

5 Gasohol E30 (30% Ethanol) Gasohol E50 (50% Ethanol) Gasoline (Reformulated) Gasoline (Unleaded) Gasoline (w/etbe, 15% max) Gasoline (w/tame, 15% max) Gasoline (w/tba, 15% max) Gasoline (w/wtbe, 15% max) Gelatine* Glycerin Heptane Heptanol Hexane Hexylene Glycol Hydraulic Fluid (Hydraulic Oil) Hydrochloric Acid (10%) Hydrochloric Acid (20%) Hydrochloric Acid (30%) Hydrochloric Acid (37%) Hydrochloric Acid (5%) Hydroquinone TS, SC, FC, TS, SC, FC, TS, SC, FC, TS, SC, FC, Page 5 of 11

6 Isobutyl Alcohol Isooctane Isophorone Isopropyl Alcohol Jet A Fuel JP-4 Aviation Fuel JP-5 Aviation Fuel Kerosene Lactic Acid (10%) Lactic Acid (2%) Lead Acetate Linseed Oil Lubricating Oil (SAE 5W-40, et al) (Motor Oil) Magnesium Chloride Magnesium Chloride (50%) Magnesium Hydroxide (50%) Mercury Methanol (Methyl Alcohol) Milk* Mineral Oil NR Page 6 of 11

7 Mineral Spirits Naphtha Naphthalene Naphthenic Acid n-butyl Alcohol (1-Butanol) (Butanol (Normal)) Nitric Acid (10%) Nitric Acid (25%) Nitric Acid (5%) n-octyl Alcohol (Octanol) Nonanol Nonyl Phenol n-propyl Alcohol (Propyl Alcohol) Oleic Acid Palm Oil Paralydehyde Parrafin Wax Perchloroethylene Petroleum Oil Phosphoric Acid (10%) Phosphoric Acid (25%) PC Page 7 of 11

8 Phosphoric Acid (43%) Phosphoric Acid (5%) Phthalic Acid (all) Picric Acid (conc) Pine Oil Polyethylene Glycol Potassium Carbonate Potassium Chlorate Potassium Chloride Potassium Nitrate Potassium Sulfate Propyl Acetate Propylene Glycol Silicic Acid Silicone Fluids Sodium Bicarbonate Sodium Carbonate Sodium Carbonate (slurry) Sodium Chlorate (50%) Sodium Chloride (sat'd) (Brine, Water (Sea), Salt Brine, Water (Salt 20%)) Page 8 of 11

9 Sodium Dichromate (all) Sodium Formate (50%) Sodium Hydrosulfite (5-50%) Sodium Hydroxide (=< 50%) (Caustic Soda) Sodium Hypochlorite (15%) Sodium Hypochlorite (5% - Bleach) (Bleach) Sodium Nitrate (40%) Sodium Nitrate (dry) Sodium Peroxide Sodium Phosphate (10%) Sodium Phosphate (50%) Sodium Silicate Sodium Sulfate (6%) Sodium Sulfide (all) Sodium Thiosulfate (30%) Solvesso 100 Sorbital* Soya Fatty Acids Soybean Oil* Sulfur Dioxide (dry) SC, FC, Page 9 of 11

10 Sulfur Dioxide (wet) Sulfur Trioxide (dry) Sulfuric Acid (10%) (Sulphuric Acid (10%)) Sulfuric Acid (5%) (Sulphuric Acid (5%)) Sunflower Oil* Tall Oil Tall Oil (fatty acid) Tallow Tannic Acid Tertiary-Amyl Methyl Ether (TAME) Tertiary-Butyl Alcohol (TBA) (Butanol (Tertiary)) Tetrachloroethylene Toluene Trichloroethylene Triethanolamine Triethylene Glycol Turpentine Vegetable Oil* Vinegar* Water (<200 F) Water (deionized, non-potable) (Water (Demineralized, Non-potable)) PC FC, TS, SC, FC, Page 10 of 11

11 Water (distilled, non-potable) Water (fresh, non-potable) Xylene Zinc Bromide Zinc Chloride (40%) Chemical resistance information herein is provided for the purpose of establishing a general profile of the coating. Test performance results were obtained in a controlled environment and the Tnemec Company makes no claim that these tests, or any other tests, accurately represent all environments. Application, environmental and design factors, chemical temperatures, and chemical mixtures can significantly impact coating performance, so due care should be exercised in the selection and use of the coating. Contact your Tnemec representative to review full project details before coating is selected. Tnemec Company Incorporated 6800 Corporate Drive Kansas City, Missouri TNEMEC1 Fax: /8/2014 Page 11 of 11