Saturday, June 21 th, 2014

Transcription

1 Saturday, June 21 th, :00-15:30 Session 1: Ultrasonic Testing for Railway Wheel-set Session Chair: Prof. Christian Boller 14:00-14:30 14:30-14:50 Wolfgang KAPPES 1, Werner BÄHR 1, Wolfgang SCHÄFER 1, Thomas SCHWENDER 1,Andreas KNAM 2, Frank KNAPP 2 1 Fraunhofer Institute for Non-destructive Testing IZFP, Saarbrücken, Germany; 2 NDT Systems GmbH, Stutensee, Germany Innovative Solution for Ultrasonic Fabrication Test of Railroad Wheels Chaoyong PENG 1, Xiaorong GAO 1, Qiuyue JIANG 2, Jidong HU 2, Dongdong WU 2 1 School of Physical Science and Technology, Southwest Jiaotong University, Chengdu, Sichuan Province, China; 2 Chengdu Lead Science & Technology Co., Ltd., Chengdu, Sichuan Province, China Research on railway axle press press-fit defects detection ability Aleksandra Ziaja 1, Li Cheng 1, Zhongqing Su 1, Wieslaw J. Staszewski 2, Tadeusz Uhl 2, Pawel Packo 2 1 Department of Mechanical Engineering, The Hong Kong Polytechnic University, 14:50-15:10 15:10-15:30 Hung Hom, Kowloon, Hong Kong; 2 Department of Robotics and Mechatronics, AGH University of Science and Technology, Al. Mickiewicza 30, Krakow, Poland Elastic waves characteristics in thick-walled hollow cylinders with internal/external surface excitation for train axle monitoring Yu Zhang 1, jianping PENG 1, Xiaorong Gao 1, Chaoyong Peng 1 1 Nondestructive Testing Research Center, Southwest Jiotong University Application of phased array ultrasonic inspection for EMUs' wheel set

2 15:50-18:00 Session 2: Ultrasonic Testing Method in Railway Session Chair: Prof. GAO Xiaorong 15:50-16:20 16:20-16:40 16:40-17:00 Ni Yiqing (The Hong Kong Polytechnic University (HKPU) FBG-based dynamic strain monitoring of boggies in high-speed trains during in-service operation for fatigue assessment Philippe Benoist 1, Philippe Bredif 2 1 M2M 2 CEA Application of phased array techniques to rail inspection Z Fan 1,2, M Lowe 2 1 School of Mechanical & Aerospace Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore ; 2 Department of Mechanical Engineering, Imperial College London, SW7 2AZ, UK Improving ultrasonic phased array imaging of heterogeneous austenitic welds by measuring weld stiffness map Ming HONG 1, Qiang WANG 2, Zhongqing SU* 1,3 1 Department of Mechanical Engineering, The Hong Kong Polytechnic University, Hong Kong S.A.R., China; 2 College of Automation, Nanjing University of Posts and Telecommunications, 17:00-17:20 17:20-17:40 Nanjing, China; 3 The Hong Kong Polytechnic University Shenzhen Research Institute, Shenzhen, China A Guided Wave Approach for Real-time Health Monitoring of High-Speed Train Bogie Frames Lu ZHAO 1, John RUDLIN 1 1 NDT Section, TWI Ltd, Cambridge, UK Development of an advanced ultrasonic inspection tool for rapid volumetric examination of aluminothermic rail welds 17:40-18:00 Plenary discussion Chairman: Christian Boller Guests: Wolfgang KAPPES, Philippe Benoist, Xiaorong Gao, Z Fan, Ni Yiqing Topics: (1)The requirement and new development on railway wheel and axle (2)Ultrasonic testing (phased array) technology and application in Railway

3 Sunday, June 22 nd, :00-15:30 Session 3: Electromagnetic Method in Railway Session Chair: Prof. TIAN Guiyun 14:00-14:30 14:30-14:50 14:50-15:10 Christian Boller, Peter Starke and Gerd Dobmann Chair of NDT & Quality Assurance, Saarland University, Saarbrücken/Germany Combination of PHYBAL and Electromagnetic NDT for Enhanced Management of Ageing Steel Railway Infrastructure Shi Yongsheng Infrastructure Inspection Institute of China Academy of Railway Sciences, China In-service Rail Damage's Conventional Ultrasonic Testing and Evaluation Methods in China Jianping PENG 1,2, Guiyun Tan 2, Li WANG 1, Xiaorong GAO 1, Zeyong Wang 1, Yu ZHANG 1 1 School of Physical Science and Technology, Southwest Jiaotong University, Chengdu, People s Republic of China; 2 School of Electrical and Electronic Engineering, Newcastle University, Newcastle upon Tyne,NE1 7RU, United Kingdom Rolling Contact Fatigue detection and Characterisation Using Eddy Current Pulsed Thermography Long Wang 1, Changxi Wang 1, Tie Gang 1, Jinghong Yang 2, Xinmeng Zhang 2, Changqing Xia 2, Zhanqi Yan 2, Yan Jiang 2 1 State Key Laboratory of Advanced Welding and Joining, Harbin Institute of 15:10-15:30 Technology, Harbin, China 2 CNR Changchun Railway Vehicles co., Ltd, Changchun, China A Study of Phased Array Ultrasonic Technology Applied to Friction Stir Weldings on High-Speed Train

4 15:50-18:00 Session 4: Optics And Other Methods In Railway Session Chair: Prof. Gerd Dobmann Chanju Kim 1,2, Ata Mahjoubfar 1,3, Akio Yazaki 1,4, Jacky Chan 1, Keisuke Goda 1,5, Masahiro Watanabe 4, Bahram Jalali 1,3,6,7 1 Department of Electrical Engineering, University of California, Los Angeles, California 90095, USA; 2 Advanced Photonics Research Institute, Gwangju Institute of Science and Technology, Gwangju , South Korea; 3 California NanoSystems Institute, University of California, Los Angeles, 15:50-16:20 California 90095, USA; 4 Yokohama Research Laboratory, Hitachi, Ltd., Kanagawa , Japan; 5 Department of Chemistry, University of Tokyo, Tokyo , Japan; 6 Department of Bioengineering, University of California, Los Angeles, California 90095, USA; 7 Department of Surgery, David Geffen School of Medicine, University of 16:20-16:40 16:40-17:00 California, Los Angeles, California 90095, USA Ultrafast Surface-Inspecting Laser Scanner Yangkai, Gaoxiaorong, Dailixin, Xieliming, Zhangyu, Pengchaoyong, Peng jianping College of physical science and technology, Southwest Jiaotong University, Chengdu Sichuan , China Research on the principle of railway wheel out-of-roundness on-line dynamic detecting system based on Laser measurement Qiang LIU 1,2, Bogdan PIWAKOWSKI 2, Zoubeir LAFHAJ 1, Kahina AGRED 3 1 Laboratoire de Mécanique de Lille, Ecole Centrale de Lille, Cité Scientifique - CS 20048, Villeneuve d'ascq Cedex, France ; 2 Institut d Electronique, Microélectronique et Nanotechnologies, Ecole Centrale de Lille, CitéScientifique - CS 20048, Villeneuve d'ascq Cedex, France ; 3 Laboratoire Matériaux et Durabilitédes Constructions, UniversitéToulouse III, 135, Avenue de Rangueil Toulouse Cedex 4, France Automated non-contact NDT by ultrasonic surface waves Peng Chaoyong 1, Zhang yu 1,Yang kai 1,Gao Xiaorong 1, Zhao Bo 2 17:00-17:20 ( 1 School of Physical Science and Technology, Southwest Jiaotong University, Chengdu, Sichuan Province, China; 2 Chengdu Lead Science & Technology Co., Ltd., Chengdu, Sichuan Province, China) Dynamic ultrasonic inspection technology for CRH high speed train and application in China 17:20-17:40 Christian Boller 1,2, Xiaorong Gao 3 1 Chair of NDT & Quality Assurance, Saarland University, Saarbrücken /

5 Germany 2 Dresden International University, Dresden/Germany 3 Southwest Jiatong University, Chengdu/China International Double Degree Academic Education in NDT at Master Level 17:40-18:00 Plenary discussion Chairman: Gerd Dobmann Guests: TIAN Guiyun, Christian Boller, Shi Yongsheng, Jianping PENG Topics: Railway defects and detection technologies