February / March Shape your dental future DISCOVER THE DIGITAL MATERIAL DIVERSITY. Connected to you.

Transcription

1 February / March 2018 Shape your dental future DISCOVER THE DIGITAL MATERIAL DIVERSITY Connected to you

2 Crown & Bridge IPS e.max IPS e.max ZirCAD MT Multi The aesthetic disc For highly aesthetic monolithic restorations with natural colour gradient Fewer manual process steps to achieve excellent aesthetics Possibility of fabricating 3-unit anterior and posterior bridges ZirCAD innovative Monolithic 25% O IPS e.max 850 MPa 1 Shade and translucency gradient Efficiency combined with lifelike aesthetics HT MT sthetic Ae Monolithic This makes the difference IPS e.max ZirCAD MT Multi are discs with a natural-looking shade and translucency progression. The distinctive quality of the material composition is the slightly higher opacity of the dentinal area (medium translucency) in comparison with the highly translucent competitive materials. This results in a sufficiently high brightness and lifelike light reflection in the dentinal area. As a result of the special powder formulation, IPS e.max ZirCAD MT Multi has higher flexural strength and higher fracture toughness than competitive materials. Therefore, restorations with reduced wall thicknesses can be fabricated. For the incisal layer, raw materials with a high translucency are used, which ensures lifelike translucency in the incisal area. To achieve a suitable A-D shade, the incisal area is stained differently depending on the tooth shade. IPS e.max ZirCAD MT The creative disc For aesthetic monolithic anterior and posterior 3-unit restorations Maximum customisation due to individual characterisation by infiltration before sintering Strength: 850 MPa 1 2 Wall thickness: 0.8 / 1.0 mm 3 Shades: BL1, A1, A2, A3, B1, B2, C2, D2 Thicknesses: 16 and 20 mm Creative Monolithic MT Efficient IPS e. ZirC Strength: 850 MPa 1 Wall thickness: / 1.0 mm 3 Shades: BL, A1, A2, A3, B1, B2, C2, D2 Thicknesses: 14 and 18 mm 850 MPa 1 High flexibility and efficient fabrication Perfect reproducibility of A-D shades Infiltration technique Pre-shaded IPS e.max ZirCAD MT Colouring Liquid Starter Kit A D colouring and Effect colouring Liquids. Contains: IPS e.max ZirCAD MT Colouring Liquids 3 A-D shades, 60ml (A1, A2, A3) 5 Effect shades, 15ml (Blue, Violet, Grey, Orange, Brown) 3 Indicators, 15ml (Blue, Red, Yellow) 3 Brushes (No.1, 3 and 5) Various accessories EN 25% OFF RRP IPS e.max ZirCAD Colouring Liquid Brush The perfect infiltration brushes Brush No Brush No Brush No. 5 25% OFF RRP 2

3 Crown & Bridge and versatile ZIRCONIUM OXIDE FF RRP ZirCAD Discs IPS e.max ZirCAD MO The classic disc Especially suitable for the fabrication of multiple unit bridges due to an excellent flexural strength of 1,150MPa 1 and high fracture toughness Effective masking of discoloured tooth structure and metal cores MO Frameworks Classic Strength: 1,150 MPa Wall thickness: / 0.6 mm 3 Shades: 0, 1, 2, 3, 4 Thicknesses: 10, 14, 18, 20 and 25 mm 1,150 MPa 1 Ideal for layering, press-on and CAD-on technique Veneered with IPS emax Ceram max AD Individual Strength: 1,200 MPa 1 2 Wall thickness: 0.4 / 0.6 mm 3 Shades: 0, 1, 2, 3, 4, sun, sun chroma and BL, A1, A2, A3, B1, C2, D2 Thicknesses: 10, 12, 14, 16, 18, 20 and 25 mm Monolithic LT Frameworks Allrounder IPS e.max ZirCAD LT The all-round disc Tooth-preserving preparation due to high strength values low wall thicknesses Minimally invasive crowns Especially suitable for long-span bridges due to an excellent flexural strength of 1,200 MPa 1 and high fracture toughness 1,200 MPa 1 For frameworks and monolithic restorations Variety of techniques Monolithic method, infiltration, partial Veneering and complete veneering Veneered with IPS emax Ceram 1 Typical mean value of biaxial flexural strength dependent on the translucency level, R&D Ivoclar Vivadent, Schaan, Liechtenstein 2 Anterior tooth 3 Posterior tooth Programat S The exceptional sintering furnace Sintering processes of up to 1,600 C Sintering of single frameworks in 75 minutes and of bridge frameworks in 90 minutes Integrated speed programs for fully anatomical restorations with a high translucency Compact design and weight of only 27 kg EA $18,097 RRP $21,290 15% OFF RRP Up to 1,600 C Speed sintering programmes Fast and efficient IPS e.max ZirCAD LT Colouring Liquid Starter Kit A D colouring and Effect colouring Liquids. Contains: IPS e.max ZirCAD LT Colouring Liquids 3 A-D shades, 60ml (A1, A2, A3) 5 Effect shades, 15ml (Blue, Violet, Grey, Orange, Brown) 3 Indicators, 15ml (Blue, Red, Yellow) 3 Brushes (No.1, 3 and 5) Various accessories EN 25% OFF RRP 3

4 Crown & Bridge IPS e.max Shade Navigation App 5 easy steps to find the correct shade and translucency level The new IPS e.max Shade Navigation App finds the correct shade and level of translucency for all IPS e.max restorations. Just 5 clicks to find the right solution - for an optimum shade match. 5 steps FREE Download 1. Enter the tooth shade 2. Enter the indication 3. Enter the die shade 4. Enter the layer thickness SNA 5. Enter the material many options Compare your result Create and print a protocol Share your result for a perfect result! For an optimum shade match NEW UPDATE with IPS e.max ZirCAD Precise translucency and shade recommendation Virtual result representation Easy shade communication IPS e.max Shade Communication Pack OFFER 1 Contains: 1x IPS Natural Die Material Shade Guide 1x Shade Communication Flowchart $59.00 RRP $67.00 OFFER 2 Contains: 1x IPS Natural Die Material 9x Shades - ND1, ND2, ND3, ND 4, ND5, ND6, ND7, ND8, ND9 1x IPS Natural Die Separator 20 ml 5x IPS Natural Die Material Shade Guide 5x Shade Communication Flowcharts Various accessories SPECIAL OFFERS $ RRP $

5 Case Study IPS e.max System Dr. Glen Liddelow & Szabi Hant Dr. Glen Liddelow Specialist Prosthodontist, Perth, Australia Szabi Hant MDT Dental Ceramist, Photographer Perth, Australia When work becomes passion, craft becomes art Crown & Bridge IPS e.max Press veneers veneered with IPS e.max Ceram, 14 and 24 IPS e.max Press veneers monolithic Initial situation with old direct composite restorations. Aesthetically not ideal high gum line and variable teeth proportions. Composite restorations removed and some orthodontic treatment to improve teeth positions. Invisalign Orthodontics Chris Orloff. Veneer preparation on teeth Tooth stump 22 slightly discoloured. Photoshop Smile design. Using a outcome photograph to show to the patient our plan for the final. Digital Shade Map for IPS e.max layering Compare shade guides to the temporaries to determine the final shade/brightness. The try in after the first ceramic build up. Aesthetic check model to simulate the intraoral situation. Evaluation of the final restorations on the aesthetic check model. Checking masking and shade. The final IPS e.max restorations on the stone check model. Final IPS e.max Press restorations Final result after two weeks 5

6 Digital Turn your lab digital 3Shape E-scanners In today s digital era, a solid CAD/CAM system has become essential for even the most cost-conscious labs. With its new affordable E scanners, 3Shape makes advanced CAD/CAM accessible to labs of all sizes while raising the bar for entry-level solutions. Best value for money Get advanced scanning features and CAD design workflows at an affordable price Fast scanning High scan speeds let you complete more cases in less time Latest technologies 5 MP cameras, Blue LED and multi-line scanning for optimal detail capture and accuracy Choose the scanner that suits your lab E1 The entry-level model for laboratories with a low amount of full-contour CAD/CAM indications E2 More productivity for laboratories with a medium amount of CAD/ CAM production E3 The all-round scanner for CAD/CAM laboratories covering a large range of indications Register for our 3Shape / Ivoclar Vivadent events at dentevents.com.au E Scanner range from $17,500 +GST Be a TRIOS Ready Lab and receive a 3Shape Articulator FREE! Visit us at ADX Sydney March 2018 to 6

7 Digital Mill your cases in-house PrograMill PM7 Powerful and unrivalled YOUR BENEFITS Watt power for excellent results - Servomotors for the highest level of speed - Intuitive operation and touch-screen display - Integrated CNC PC and intelligent machine management - Ioniser and automatic self cleaning Active Air Suction Ivoclar Digital Team Excellence in sales and support Ivoclar Vivadent supports you with an extensive Digital Team to help your business become digital ready. Our Asia Pacific team have a detailed background in digital dentistry, along with the requisite knowledge to cover all your digital needs, from 3D Printing through to Digital Dentures. 12 FULL TIME TEAM MEMBERS 8 in Australia and New Zealand 4 in Philippines discover our SPECIALS and TRADE-IN deals! 7

8 Crown & Bridge Programat P510 The Programat P510 combines high-tech and modern design in a very efficient and user-friendly furnace. Integrated infrared thermal camera ensures an optimum predrying process DSA (Digital Shade Assistant) function for digital shade matching Large colour touch screen and proven membrane-sealed keypad QTK2 muffle technology with SiC bottom reflector Automatic double-range temperature calibration (ATK2) Remote diagnostics via Internet, and data log files OSD display of operating and progress status EA - includes pump $8,495 RRP $9,990 The integrated thermographic camera detects infrared rays and measures the temperature directly at the surface of the fired object. This technology opens up a host of new possibilities for controlling the furnace drying and closing processes. Programat EP 3010 The Programat EP 3010 is characterised by cost effectiveness and high-quality press and firing results. In addition, the Programat EP 3010 is optimally coordinated with Ivoclar Vivadent press ceramic materials such as IPS e.max Press. FPF function: Fully automatic Press Function for optimum press results Programs are optimally coordinated with Ivoclar Vivadent materials QTK2 muffle technology with SiC bottom reflector for homogeneous heat distribution Colour touch screen and proven membrane-sealed keypad for easy operation Electronic press drive with force sensor produces high-quality press results. No compressed air connection required Crack Detection System detects cracks in the investment ring Fully automatic press function Due to the new patented and fully automatic press function, pressing is now even easier and more economical. All you need to do is put the investment ring into the furnace and press the start button - everything else is performed by the furnace itself. It chooses the press program, automatically heats the press chamber to the appropriate temperature and presses the fluid ceramic into the investment ring at the right time. Even post-pressing and cooling are controlled fully automatically simply by touching a button. IPS e.max Press EA - includes pump $13,369 RRP $15,725 IPS Ivocolor Universal stains and glazes IPS Ivocolor is a universal range of Stain and Glaze materials for the press, CAD and layering ceramics from Ivoclar Vivadent. Individual freedom in customising restorations due to select colour compositions Streamlined handling due to an innovative paste formulation High gloss obtainable at firing temperatures as low as 710 C Untainted gloss results no grey or white discolouration Areas of application Surface characterisation of restorations Adjusting the brightness of layering materials Customisation of cut-backs Shade characterisations in the layering technique Individually shaded gingiva IPS e.max ZirCAD MT Multi crown glazed with IPS Ivocolor 15% OFF RRP IPS Ivocolor Shade Dentine Shade Incisal IPS Ivocolor Essence Essence Basic SD 0 SD 1 SD 2 SD 3 SD 4 SD 5 SD 6 SD 7 SD 8 SI 1 SI 2 SI 3 E 01 E 02 E 03 E 04 E 05 E 06 E 07 E 08 E 09 E 10 E 11 E 12 E 13 E 14 E 15 E 16 E 17 E 18 E 19 E 20 E 21 E 22 E 23 8

9 Ivoclar Vivadent has the teeth range you need! Prosthetics SR Phonares II Exceptional lifelike aesthetics Innovative tooth mould concept - soft or bold - youthful, universal or mature Anatomical interdental closure to avoid black triangles Optimal setup of anterior teeth due to proximal set & fit design The premium selection Vivodent S DCL State-of-the-art DCL material shows excellent wear behaviour Available in 16 A-D, 4 BL shades Lifelike layering design Large selection of moulds - Vivodent & Vivodent Plus The trusted original DCL selection SR Vivodent S PE Extraordinary design flexibility due to 15 individual anterior moulds Vibrant shades due to optimised PE layering combined with highly cross-linked DCL polymer for durability Beautiful layering concept wrapped around proximally The optimised Pearl Effect selection Spend Over $500 at RRP on ProBase acrylics and Get 10 Cards of any Ivoclar Vivadent teeth for Free *! * Applies to any ProBase or Triplex Hot & Cold Standard Packs. Only one offer per customer. Spend excludes GST and must be on one invoice. Ivostar/Gnathostar Available in A-D and Chromascop shades Harmonised layering of PMMA structure The economically optimised selection ProBase High standard of quality with regard to processing properties, accuracy of fit and stability of shape and colour. NEW! Launch Vivodent S DCL Shade Guide 16 A-D and 4 Bleach Shades For more information contact our Technical Department on 1300 IVOCLAR 9

10 Investments Equipment Inject the Best Technology into your Laboratory IvoBase Injector The IvoBase Injector permits a fully automated, controlled injection and polymerisation procedure of special PMMA resins which are coordinated with the system. The chemical shrinkage of the resin is entirely compensated during polymerisation due to the patented temperature control in the flask and the heater. This enables the fabrication of denture bases featuring high accuracy of fit and precision. The injector has been especially developed for the IvoBase material and permits excellent restorations. BONUS with your Ivobase Package Purchase! RECEIVE $1,000 towards our 3 day Advanced Prosthetic Training Digital BPS SEMCD on June 2018 in Schaan, Liechtenstein with Dr Jiro Abe. For more information, please contact Arnie Jabour on PLUS Receive $1,000 worth of Ivoclar Vivadent Teeth EA $9,900 RRP $13,500 Includes 2 flasks, glove and checking set and a free box of Ivobase Hybrid or High Impact acrylic Motion Alginate Mixer A harmonious alginate mixer that produces perfectly mixed alginate Long-lasting, enhanced motor delivering high-speed torsion and ensures fine mixing PC-made casing, which is light and resistant to heat Streamlined and compactly designed 3 types of memory settings allows user to set different mixing duration $1,190 RRP $1,353 PLUS 5x Chromax Packets FREE Sil-Tech Putty Versatile silicone for laboratory use Easy application due to soft consistency Excellent reproduction of anatomical details reduces preparation time and labour costs Easy use based on mixing control Dimensionally stable and tear resistance Well-balanced final hardness resists deformation AN 40ml Gel Activator $19.50 RRP $ AN 5kg Putty $ RRP $ Sil-Tech Super Shore A Hardness 95 Vinyl Polysiloxane impression material for the dental laboratory. Hard putty for flasking dentures AN 1kg A + B Putty $ RRP $

11 Digital Consumables The most trusted source for gypsums rock solid! SCANNABLE SCANNABLE Ultirock Golden Brown Premium scannable die stone kg $ ea RRP $ Lean Rock Ivory Quick setting, high strength die stone kg $ ea RRP $ Quickstone Pink Lab Stone With consistent handling properties and smooth creamy mix kg $59.00 ea RRP $ Economy Model Stone Buff An economical dental stone for general purpose use kg $45.00 ea RRP $89.00 FastFire 15 Universal phosphate investment for all C&B alloys. Liquid not included x 60g Sachets $ RRP $ MainStay Articulator System Pin and Pinless No external walls Strong hinges Built-in support rods Mainstay pins Stable fit with pin or pinless system $89.00 ea RRP $ Full Arch Pin Anterior Pin Full Arch Pin OR Anterior Pin Each set includes 25 Articulators, 100 MainStay Pins & 3 Support Rods $ ea RRP $ Full Arch Pin Anterior Pin Quadrant Pin OR Pinless Quadrant Pin includes 50 Articulators, 100 MainStay Pins & 3 Support Rods. Quadrant Pinless includes 50 Articulators & 3 Support Rods. Asiga MAX The Asiga MAX offers exceptional productivity in a small footprint. With 62μm HD print precision, it is optimised for orthodontics, crown & bridge, surgical guides, dental models, custom trays, and partial dentures in lab and clinical environments. DETAX Freeprint Materials Materials for fabricating cast objects, dental models, orthodontic apparatuses, implantology, X-ray templates and occlusal splints, temporary crowns & bridges, individual impression and functional trays and base resin plates. Buy 3, Get 1 FREE! * NEW! Contact your local Ivoclar Vivadent Technical Specialist for more information * Includes all Freeprint materials. Free item to be of equal or lesser value. le++ b++biocompati 11

12 Ivoclar Vivadent Professional Development 2018 BPS & Suction-Effective Mandibular Complete Dentures Digital 2-day Technical Certification Course Tue 20 - Wed Feb - South Australia Tue 17 - wed 18 April - Sydney Tue 22 - Wed 23 May - Victoria Tue 24 - Wed 25 July - Brisbane 3Shape and Ivoclar Digital training nights Arnie Jabour & Stephen McGlynn Look forward into the transition from analogue to digital Removable Prosthetics. You will follow the BPS system protocols to produce precision complete dentures. BPS SEMCD Tray design and Gnathometer set-up techniques including digital workflows, will be demonstrated. The importance of the current BPS SEMCD technical procedures, in the new rapid digital production of removable dentures, which integrates the BPS Clinical treatment steps in the dental practice with the digital denture manufacturing processes in the lab, will be demonstrated. Workshops on characterisation and aesthetic techniques for precision dentures, will equip you with new skills in premium denture delivery. Both Stephen and Arnie have spent the past 4 years practicing Dr Abe s Suction Denture Impression method and completed Master Instructor training with Dr Abe. This experience enables them to teach these techniques, and combining them with the new Digital CAD and Manufacturing process. To register for this event, and to see the full calendar of courses and programmes for Australia, please visit: Save the date Melbourne VIC: February 6 Perth WA: February 22 Adelaide SA: March 1 Sydney NSW: March 7 Brisbane QLD: March 8 Presenter Joseph Tavella Dental Technician, 3Shape Product Specialist DON T MISS OUT Register today at dentevents.com.au March 2018 International Convention Centre, Sydney Come visit us at Stands 70, 71 & 72 dlausales@ivoclarvivadent.com HEAD OFFICE VIC, TAS & SA 1-5 Overseas Drive Noble Park North VIC 3174 Ph: +61 (0) Fx: +61 (0) NSW & ACT OFFICE 25 Cleg Street Artarmon NSW 2064 Ph: +61 (0) Fx: +61 (0) WA & NT OFFICE 134 Charles Street West Perth WA 6005 Ph: +61 (0) Fx: +61 (0) QLD OFFICE 3 / 53 Southgate Avenue, Cannon Hill QLD 4170 Ph: +61 (0) Fx: +61 (0) Valid 1 February 31 March 2018 Correct at time of print Descriptions & data constitute no warranty of attributes. All discounts are off RRP unless stated otherwise. Equipment offers with consumables must be all on one invoice. Free goods of equal or lesser value.