INNOVATION SEPTEMBER JANUARY

Transcription

1 INNOVATION SEPTEMBER JANUARY 2019

2 Tetric Evo-Line The Tetric Evo line of products combines clinical reliability and durability with innovation. The four composites of the Tetric Evo family provide high-quality aesthetic restorations for all cavity classes. Gains in efficiency can be achieved by using the correct combination of composites, depending on the specific cavity class. All four composites are now offered together in new system kits, which include an overview of their indications and possibilities of combination to enable users to see which material is best used when and where. Each system kit comprises: Tetric EvoCeram sculptable, for conventional layering techniques Tetric EvoFlow flowable, for conventional layering techniques Tetric EvoCeram Bulk Fill sculptable, application in increments of up to 4 mm Tetric EvoFlow Bulk Fill flowable, application in increments of up to 4 mm Adhese Universal VivaPen the universal adhesive system The kits are available in cavifils or syringes. A suitable solution for every cavity class Non-discoloured dentin Moderately discoloured dentin Severely discoloured dentin Class I + II < 2 mm Tetric EvoCeram Tetric EvoFlow or Tetric EvoCeram Dentin + Tetric EvoCeram Tetric EvoFlow or Tetric EvoCeram Dentin + Tetric EvoCeram Class I + II 2 4 mm Tetric EvoCeram Bulk Fill Tetric EvoFlow Bulk Fill + Tetric EvoCeram Tetric EvoFlow or Tetric EvoCeram Dentin + Tetric EvoCeram Class I + II 4 mm Tetric EvoCeram Bulk Fill Tetric EvoFlow Bulk Fill + Tetric EvoCeram Tetric EvoFlow (Dentin) + Tetric EvoCeram Bulk Fill Class I + II 4 6 mm Tetric EvoFlow Bulk Fill + Tetric EvoCeram Tetric EvoFlow Bulk Fill + Tetric EvoCeram Tetric EvoFlow (Dentin) + Tetric EvoCeram Bulk Fill Class I + II > 6 mm Tetric EvoFlow Bulk Fill + Tetric EvoCeram Bulk Fill Tetric EvoFlow Bulk Fill + Tetric EvoCeram Bulk Fill Tetric EvoFlow (Dentin) + Tetric EvoFlow Bulk Fill + Tetric EvoCeram Bulk Fill

3 1 x Tetric Evo-Line System Kit Cavifil + 1 x Tetric EvoCeram Cavifil, 20 x 0.2g A2* + 1 x Tetric EvoCeram Cavifil, 20 x 0.2g A3* 1 x Tetric Evo-Line System Kit Syringe + 1 x Tetric EvoCeram Syringe, 3g A2* + 1 x Tetric EvoCeram Syringe, 3g A3* + 1 x Tetric EvoFlow Syringe, 3g A3* 4 x Tetric EvoFlow Syringe, 2g each, any shade or 4 x Tetric EvoFlow Cavifil, 20 x 0.2g each, any shade or 4 x Tetric EvoFlow Bulk Fill Syringe, 2g each, any shade or 4 x Tetric EvoFlow Bulk Fill Cavifil, 20 x 0.2g each, any shade and get 1 pc. of the same product (in the same delivery form)* OFFER - OFFER - OFFER - OFFER 4 x Tetric EvoCeram Syringe, 3g each, any shade or 4 x Tetric EvoCeram Cavifil, 20 x 0.2g each, any shade or 4 x Tetric EvoCeram Bulk Fill Syringe, 3g each, any shade or 4 x Tetric EvoCeram Bulk Fill Cavifil, 20 x 0.2g each, any shade and get 1 pc. of the same product (in the same delivery form)*

4 OFFER - OFFER - OFFER - OFFER Bluephase Style Bluephase Style is on an ergonomic mission. Whilst it is grounded in the proven technologies of the Bluephase range, it incorporates optimised features. Bluephase Style offers a high light intensity (new at 1,200 mw/cm2) for short curing times as well as a compact and ergonomic shape that comfortably fits the hands of women and men. Click & Cure This is how it works: Turn around charging base, remove power cord, attach to handpiece, resume work as usual. TRADE-IN RETURN 1 x old curing light and get a discount of: when purchasing a new Bluephase curing light 1 x Bluephase Style or 1 x Bluephase Style blue or 1 x Bluephase Style pink or 1 x Bluephase Style green or 1 x Bluephase 20i (G2) Advantages Polywave LED with halogen-like broadband spectrum of 385 to 515 nm Suitable for all materials Large treatment field due to 10-mm light probe Shortened light probe, enabling access to all tooth surfaces without extreme opening of the mouth Click & Cure for battery-independent emergency corded operation Available in 4 colors: grey, pink, blue and now also in green

5 OFFER - OFFER - OFFER - OFFER Cementation Dentists are finding it increasingly difficult to make the right choice amidst an ever growing selection of cementation and restoration materials. Which cement is suitable for which material and which indication? Variolink Esthetic and SpeedCEM Plus are fully coordinated product systems which are suited for the cementation of a broad spectrum of different types of restoration. Both materials complement each other optimally: Variolink Esthetic is an aesthetic light- and dual-curing luting composite for the permanent cementation of demanding ceramic and composite restorations. aesthetic restorations SpeedCEM Plus is a self-adhesive resin cement that is ideally suited for the cementation of opaque restorations made of zirconium oxide ceramics. 1 x Variolink Esthetic DC System Kit IPS e.max + 1 x OptraGate Small Refill/80* 1 x Multilink Automix Refill 9g, any shade + 1 x Multilink Primer A+B Refill 2 x 3g*

6 Fluor Protector S Homogeneous Formula - Fluor Protector S s active ingredient is Ammonium fluoride. In solution the concentration is 7700ppm increases to just under 30,000ppm of fluoride after drying. Homogeneous meaning the fluoride content is evenly distributed throughout the product. Low Viscosity - Excellent flow into fissures and interdentally, soaking into the enamel surface. Economical & Hygienic Delivery Form - Fluor Protector S s dispensing tube allows precise dosing and minimises waste. One 7g sufficient for 30 full adult dentitions. Aesthetics and Comfort - Fluor Protector S varnish is clear leading to better patient compliance. Colophony & Latex Free - It does not contain colophony, which is contraindicated in patients who have asthma or allergies, particularly if they have been hospitalised with their condition. Available with latex free packaging Fluor Protector S Duraphat* Clinpro White Varnish* *Not a registered trade mark of Ivoclar Vivadent AG Ml Varnish* Bifluorid 10%* Alkaline-soluble fluoride on the enamel surface one hour after the application of various fluoride varnishes (Ivoclar Vivadent, R&D 2011) OFFER - OFFER - OFFER - OFFER 1 x OptraGate Assortment + 1 x Fluor Protector S Starter Kit 1 x 4g* 1 x Cervitec F Refill tube, 7g 1 x Fluor Protector S Refill, 7g + 1 x OptraGate Junior Assortment* / blue + pink / 20+20* Adhese Universal Adhese Universal is a single-component, light-cured adhesive for direct and indirect bonding procedures that features compatibility with all etching techniques: self-etch, selective-enamel-etch and total-etch. Adhese Universal is available in the unique VivaPen delivery form for fast and convenient direct intra-oral application with minimal waste to optimse cost-effectiveness. 1 x Adhese Universal System VivaPen 1 x 2 ml + 1 x VivaPen Snap-On Cannulas Refill 100*

7 ALL YOU NEED FOR RESTORATIONS IN A SINGLE VISIT The coordinated products out of one hand cover an extensive range of indications and offer all that is needed for treatment in a single visit. The benefits: durable, aesthetic and accurate restorations paired with efficient and time-saving workflows. 1 Average biaxial flexural strength, over a period of 10 years 2 Typical mean value of biaxial flexural strength of IPS e.max ZirCAD LT 3 Typical mean value of biaxial flexural strength R&D Ivoclar Vivadent, Schaan, Liechtenstein

8 IPS e.max CAD 3 x IPS e.max CAD (HT, MT, LT, MO) C14/I12 (5pcs each) + 1 x Monobond Etch & Prime Refill 5g* 3 x IPS e.max CAD Refills for CEREC and inlab, 5pcs each (HT, MT, LT, MO) I x Tetric CAD Refills, 5pcs each (HT, MT) I12* 3 x IPS e.max CAD Refills for CEREC and inlab, 5pcs each (HT, MT, LT, MO) C x Tetric CAD Refills, 5pcs each (HT, MT) C14* OFFER - OFFER - OFFER - OFFER 4 x IPS e.max CAD for CEREC and inlab, 5 pcs each, same size and same translucency (HT, MT, LT, MO) C14/I12 + and get 1 pc. of the same size and same translucency for free* IPS e.max ZirCAD 4 x IPS e.max ZirCAD LT C17 (5 pcs each), any shade + 1 x Ivoclean Refill 5g* + 1 x SpeedCEM Plus Refill yellow, opaque or transparent 9g* IPS Empress CAD 3 x IPS Empress CAD for CEREC and inlab, 5 pcs each, same size and same translucency + and get 1 pc. of the same size and same translucency for free* Tetric CAD 3 x Tetric CAD Refills, 5 pcs each + 1 x Adhese Univ. System VivaPen 1 x 2 ml/100*

9 OFFER - OFFER - OFFER - OFFER Programat CS2 CS2 Advantages: Colour touch screen and proven membrane-sealed keypad QTK2 muffle technology with SiC bottom reflector Easy operation; specially developed for use in the dental practice Automatic double-range temperature calibration (ATK2) Remote diagnostics via Internet, and data log files Software updates via USB flash drive Power-saving technology OSD display Integrated tong holder Double valve vacuum technology 1 x Programat CS2 + 1 x Vacuum Pump VP5* + 1 x IPS e.max CAD Crystallization Kit* Programat CS3 1 x Programat CS3 + 1 x Vacuum Pump VP5* + 1 x IPS e.max CAD Crystallization Kit* CS3 Advantages: Firing and crystallization furnace with integrated DSA function for the digital analysis of the tooth shade. Colour touch screen in combination with the proven membrane-sealed keypad. Operating concept specially developed for the dental practice. QTK2 muffle technology with SiC bottom reflector Automatic double-range calibration (ATK2): Integrated power-save function (Power-Save Technology) OSD display Programat WLAN Kit for wireless data transfer (software updates, PrograBase x 10) Modern interfaces (USB, ethernet, SD card reader) Double valve vacuum technology

10 SR Vivodent S PE SR Vivodent S PE is a distinctive anterior tooth for sophisticated needs. The PE layers and high shade intensity impart a very lifelike appearance. Exceptional design Each of the 16 upper and 8 lower moulds is specifically designed to suit the characteristics of each individual tooth. The moulds fulfil the essential requirements of modern denture teeth. Highly cross-linked DCL material The new teeth are made entirely of highly cross-linked DCL polymer (Double Cross-Linked). This material displays a higher compressive strength but a similar flexibility to that of conventional PMMA. As a result, extended denture longevity can be expected. 60 x SR Vivodent S PE set of 6, any shade + 20 x SR Orthotyp S PE set of 8, any shade + 1 x SR Vivodent S PE Shade Guide* + 1 x tooth Cabinet with 4 Drawers* OFFER - OFFER - OFFER - OFFER Ivobase Injector IvoBase Injector permits a fully automated, controlled injection and polymerisation procedure of special PMMA resins which are coordinated with the system. The chemical shrinkage of the resin is entirely compensated during polymerisation thanks to the patented temperature control in the flask and the heater. This enables the fabrication of denture bases featuring high accuracy of fit and precision. The injector has been especially developed for the IvoBase material and permits excellent restorations. The IvoBase Injector can also be used for the tried-and-tested SR Ivocap material. 1 x IvoBase Injector + 1 x IvoBase Flask Set* + 1 x IvoBase Hybrid Kit 20 Pink-V* + 1 x IvoBase HI Kit 20 Pink-V*

11 HIGHLIGHT HARMONIOUS RESULTS WITH IPS E.MAX ZIRCAD MT MULTI The polychromatic IPS e.max ZirCAD MT Multi discs provide an ideal blend of high strength and natural aesthetics. Their exceptional properties are based on two decisive factors: the special material composition and the integrated progression of shade and translucency. Unlike other zirconia discs available on the market, IPS e.max ZirCAD MT Multi is composed of two different basic materials: 4Y-TZP with medium translucency (MT) and 5Y-TZP with high translucency (HT). The unique combination of these two components provide the discs with an optimum brightness in the dentin area and high translucency in the incisal area. In addition, the discs offer a high flexural strength of 850 MPa (typical mean value) and are suitable for the fabrication of three-unit bridges in the posterior region (Type II, Class 4 material). HT 5Y-TZP HT 4Y-TZP

12 OFFER - OFFER - OFFER - OFFER The IPS e.max ZirCAD MT Multi discs feature a balanced progression of shade and translucency. The progression is modelled on the dentin and enamel layers of the natural tooth and produces an accurate match to the A-D shade guide. Given their outstanding aesthetic properties, IPS e.max ZirCAD MT Multi restorations can be finalised easily and efficiently using the glazing technique. It goes without saying that the restorations can additionally be customised using the materials of the IPS Ivocolor range in the staining technique or the Effect Liquids in the infiltration technique - as wished or required. 3 x IPS e.max ZirCAD LT 10mm, any shade or 3 x IPS e.max ZirCAD LT 12mm, any shade or 3 x IPS e.max ZirCAD LT 14mm, any shade or 3 x IPS e.max ZirCAD LT 16mm, any shade or 3 x IPS e.max ZirCAD LT 18mm, any shade or 3 x IPS e.max ZirCAD LT 20mm, any shade or 3 x IPS e.max ZirCAD LT 25mm, any shade or 3 x IPS e.max ZirCAD MT 14mm, any shade or 3 x IPS e.max ZirCAD MT 18mm, any shade or 3 x IPS e.max ZirCAD MT Multi 16mm, any shade or 3 x IPS e.max ZirCAD MT Multi 20mm, any shade 1 x pc. of the same product for free 5 x Viteo Base, any shade and any size 1 x Multilink Hybrid Abutment Refill HO 0 or 1 x Multilink Hybrid Abutment Refill MO 0 5 x Viteo Base, any shade and any size and get 1 pc. of the same shade and size free*

13 OFFER - OFFER - OFFER - OFFER Telio CAD Telio CAD are cross-linked PMMA blocks and discs. This material allows you to produce temporary crowns, bridges and hybrid abutment crowns. The industrial polymerisation process makes the material very homogeneous. This means Telio CAD can be easily processed. 3 x Telio CAD LT Discs 16mm / 1, any shade or 3 x Telio CAD LT Discs 20mm / 1, any shade or 3 x Telio CAD LT Discs 25mm / 1, any shade 1 x pc. of the same product for free Colado CAD Colado CAD Ti2 are pure titanium discs. They are suitable for the production of crowns and bridge frameworks for the anterior and posterior region. Depending on the situation and the indication, you can use the light-curing laboratory composite SR Nexco to veneer the restorations. The CTE range of Colado CAD Ti2 is 9.6 x 10-6/K. Colado CAD Ti5 are discs made from a titanium alloy. Use these discs to mill crowns, large-span bridges and implant-supported superstrucutres. The laboratory composite SR Nexco allows you to veneer restorations individually according to the patient s requirements. The CTE range of Colado CAD Ti5 is 10.3 x 10-6/K. 3 x Colado CAD CoCr mm / 1 or 3 x Colado CAD CoCr mm / 1 or 3 x Colado CAD CoCr mm / 1 or 3 x Colado CAD CoCr mm / 1 or 3 x Colado CAD CoCr mm / 1 or 3 x Colado CAD CoCr mm / 1 or 3 x Colado CAD CoCr mm / 1 or 3 x Colado CAD CoCr mm / 1 1 x pc. of the same product for free 3 x Colado CAD Ti mm / 1 or 3 x Colado CAD Ti mm / 1 or 3 x Colado CAD Ti mm / 1 or 3 x Colado CAD Ti mm / 1 or 3 x Colado CAD Ti mm / 1 or 3 x Colado CAD Ti mm / 1 or 3 x Colado CAD Ti mm / 1 or 3 x Colado CAD Ti mm / 1 or 3 x Colado CAD Ti mm / 1 or 3 x Colado CAD Ti mm / 1 or 3 x Colado CAD Ti mm / 1 or 3 x Colado CAD Ti mm / 1 1 x pc. of the same product for free

14 IPS Style The patented metal-ceramic material IPS Style offers dental labs maximum efficiency, easy handling and lifelike aesthetics. This is the first material in the history of dental ceramics to contain oxyapatite crystals. These crystals reflect a high amount of incident light and therefore give restorations a naturallooking depth. Oxyapatite crystals are contained in all the shaded components, ranging from the opaquer to the incisal materials. This allows the translucency or opacity of the restoration to be controlled as needed. The additionally contained leucite and fluorapatite crystals and the coordinated glass phases impart this low-fusing mixed-glass ceramic with unique handling and optical properties. 15 x IPS Style Ceram Refill, 100g each, any shade + 6 x IPS Ivocolor Essence, 1.8g* each + 6 x IPS Ivocolor Shade Dentin, 3g* each + 3 x IPS Ivocolor Glaze Paste, 3g* each 15 x IPS Style Ceram Refill, 20g each, Dentin or Incisal, any shade + 2 x IPS Ivocolor Essence, 1.8g* each + 2 x IPS Ivocolor Shade Dentin, 3g* each + 1 x IPS Ivocolor Glaze Paste, 3g* OFFER - OFFER - OFFER - OFFER IPS Style comprises components for single and multiple layer techniques. The materials are all matched to the stains and glazes of the versatile IPS Ivocolor assortment.

15 OFFER - OFFER - OFFER - OFFER Programat Ceramic Furnaces The current Programat furnace platform offers users a choice of three innovative models to suit their specific requirements. The Programat P310 meets the requirements for a straightforward ceramic furnace without too many additional functions. The Programat P510 has been designed for daily use and features an integrated infrared camera and a host of additional innovative features. The Programat P710 is the premium furnace in the X10 series designed to meet the most exacting requirements. It leaves virtually nothing to be desired. All three furnaces are equipped with the QTK2 muffle technology and SiC bottom reflector to ensure optimum firing results. Various communication interfaces (USB, Ethernet, SD card, WLAN, Bluetooth, etc) Automatic double-range temperature calibration (ATK2) Vacuum parameter assistant for automatic parameter selection Infrared thermal imaging camera FEATURES PDF viewer Large cooling tray Modern acoustic signals OSD 2 operating and progress display Multimedia capabilities (pictures, MP3, videos) Easy operation via colour touch screen Diverse diagnostics, maintenance and test programs Integrated timer DSA Digital Shade Assistant for digital shade matching 1 x Programat P510 QTK2 muffle technology for a homogeneous heat distribution Up to 700 individual programs 1 x Programat P x Vacuum Pump VP5* + 1 x IPS Ivocolor Starter Kit* + 1 x Vacuum Pump VP5* + 1 x IPS Ivocolor Starter Kit* 1 x Programat P x Vacuum Pump VP5* + 1 x IPS Ivocolor Starter Kit*

16 Programat Press Furnaces The Programat EP 3010 is characterised by cost effectiveness and high-quality press and firing results. In addition, the Programat EP 3010 is optimally coordinated with Ivoclar Vivadent press ceramic materials such as IPS e.max Press. In comparison to its predecessor model EP 3000, the operation of the Programat EP 3010 has become even simpler due to the new colour touch display, the modern icons, the intuitive menu-based navigation and the proven membrane-sealed keypad. The Programat EP 5010 combines hightech and modern design in a very efficient and user-friendly furnace. In addition, the Programat EP 5010 is optimally coordinated with Ivoclar Vivadent press ceramic materials such as IPS e.max Press. The Programat EP 5010 is a premium combination furnace of the latest generation of the Programat series and may be used as both a press and a ceramic furnace. This highly innovative, efficient and user-friendly furnace model optimally combines sophisticated design and advanced technology. OFFER - OFFER - OFFER - OFFER 1 x Programat EP x Programat EP x Vacuum Pump VP5* + 1 x IPS Ivocolor Starter Kit* + 1 x Vacuum Pump VP5* + 1 x IPS Ivocolor Starter Kit*

17 IPS PressVEST Premium Its high stability permits the processing of materials with different expansion behavior including milled and printed wax or resin as well as conventional build-up wax. Additional benefits include minimal reaction layer and highly accurate details and fit. 1 x IPS PressVEST Premium Powder, 5kg 1 x IPS PressVEST Premium Liquid, 1l + 1 x IPS e.max Press Refill, 5 pcs, any shade* OFFER - OFFER - OFFER - OFFER MULTI HT MT LT MT HO IMPULSE 3 x IPS e.max Press Refill, 5 pcs each, same size and same translucency and get 1 pc. of the same size and same translucency for free* 4 x IPS e.max Press Refill, 5 pcs each, any shade + 1 x IPS e.max Press Multi Refill, 5 pcs, any shade* 6 x IPS e.max Ceram, 20g, Dentin or Incisal any shade + 1 x IPS e.max Press Refill, 5 pcs any shade*

18 *Will be delivered to you directly by Ivoclar Vivadent AG. Changes and possible errors are reserved. The special offers are valid until 31/01/2019 as long as stocks last. These offers cannot be combined with any other promotional offers or special pricing. Your order with your data will be forwarded to your dealer and will be considered binding once the agreement between you and your dealer regarding the prices and conditions has been concluded. The special offers can only be obtained from participating dealers. All free items will be sent on receipt of copy invoice, send copy invoices to please allow 28 days for delivery. Ivoclar Vivadent processes your personal data for customer care, order processing and marketing purposes within the scope of its own ordinary business activities, if necessary in cooperation with its affiliated companies (available at You have the right to object to this processing at any time by contacting In the event of an objection, your personal data will be deleted unless it its stipulated by law to be stored beyond this time. E&EO