AnyOne. Contents. XPEED 04 AnyOne Concept 05 AnyOne Features 06 AnyOne Fixture Product. AnyOne Abutment Options

Transcription

1 AnyOne Contents XPEED 04 AnyOne Concept 05 AnyOne Features 06 AnyOne Fixture Product - Fixture / Normal Thread 08 / Deep Thread 09 / Special Length 09 - Cover Screw & Healing Abutment 09 AnyOne Abutment Options - Fixture level prosthesis 11 - Abutment level / Solid Abutment prosthesis 18 / Abutment prosthesis 22 / Multi-unit prosthesis 26 / Flat Abutment prosthesis 31 - Overdenture prosthesis / Meg-Rhein System 34 AnyOne Surgical drilling sequence 38 AnyOne Surgical kit - Surgical kit layout 40 - Stopper Drill kit 45 - Prosthetics kit 46 - BonEx kit 48 Extra Option Product - i-gen 51 - MEG-TORQ/ MEGA ISQ 53 - EZ Seal kit 55

2 AnyOne 02 /03 AnyOne T.O.P concept based implant system. AnyOne can be enjoyed by anyone...from the beginner to the most experienced implantologists. Easy and convenient "Regular Thread" or "Deep Thread" for stronger initial fixation "Special 7mm" essential for special case Bevel 2mm 5mm Nerve For Hard Bone Easy and Simple placement for all cases. 3.5, 4.0, 4.5, 5.0, 6.0, 7.0 For Soft Bone New improved design of Deep Thread with the same core diameter., extended thread length giving substantially stronger initial stability for soft bone application. 4.5, 5.5, 6.5, 7.5, 8.0 For Irregular Ridge Can even be used for non-uniform bone loss with low ridge compensating by Bevel. 4.5, 5.0, 6.0, 7.0 Ca2+ ions are incorporated onto the S-L-A surface through a unique hydrothermal treatment. This treated surface activates the osteoblasts in living organisms creating a secure bone matrix layer that is combined with PO3-4 ions. XPEED provides a fast and secure osteointegration over the entire surface of the fixture.

3 S - L - A surface with Ca 2+ Incorporation MegaGen has developed surface treatment based on S - L - A technique with calium incorporation process. Calcium ion creates a CaTiO3 nanostructure on the surface, and activates osteoblasts in the live bone.the name of this unique specialized surface treatment is XPEED. Bigger BIC resulting bigger removal torque after osseointegration XPEED demonstrates bigger BIC and requires bigger removal torque than the RBM or conventional S-L-A surface treatments. % Ncm Bone to implant contact(bic) S-L-A Removal torque Fast & Strong Osseointegration RBM Histological analysis S-L-A Test result after 4weeks with rabbit RBM Histological sections of Ti implants with XPEED, S-L-A, RBM surfaces shows the XPEED makes the highest BIC. Bone contact was measured over surface of Ti implants. 0 S-L-A RBM Blue colored surface as the evidence of purity Cell attachment During the manufacture process of XPEED treatment, the S-L-A surface is completely neutralized to remove any acid residue. The blue color of XPEED surface is the symbol of purity. Nano-thickness XPEED is different from conventional HA coating technique. Because ca 2+ ions are incorporated XPEED will not result peeling or absorption after fixture placement. 0.5 ~ 0.7um Implant HA coating 5~10um Implant S-L-A with nano Ca 2+ incorporation

4 AnyOne 04/05 AnyOne s concept is T.O.P AnyOne implant system was developed to be Tissue friendly, Operator friendly, Patient friendly(t.o.p)... From the novice clinician to the expert, all can appreciate the benefits that AnyOne offers. The ease of implant placement, the initial stability, excellent soft & hard tissue response and overall shorter treatment time are just a few reasons that AnyOne will become your implant of choice. Patients can expect minimally invasive surgery with less pain, shorter healing time, and a more esthetic final restoration. The AnyOne implant system truely offers a better experience and satisfaction to both the dentist and the patient. 1. Tissue friendly Improved surface treatment - Better crestal bone response due to stress reduction design. Better cancellous bone response due to evenly distributed stress. Better soft tissue response thanks to the bio-friendly S-line shape. 2. Operator friendly Simplified surgical protocol giving predictable initial stability Simplified & compatible, single platform prosthetics Secure osteointegration with shortened healing times High compressive strength 3. Patient friendly Minimally invasive surgery Shorter recovery and treatment time. Enhanced esthetic results.

5 AnyOne Features Advanced fixture design allows easier drilling in any bone density while ensuring initial stability. Ø7.0 Ø6.0 Ø3.5 Simplified surgical protocol with predictable initial stability Diversed prosthetic options provide convenient solutions The convenience of a single prosthetic connection for all fixture sizes with an 11 degree internal hex connection. Stress reduction on crestal bone Less stress More stress Stress distribution on cancellous bone - Placing fixture into the alveolar bone is easier to control due to the straight upper portion of the fixture. - Crestal bone loss is minimized by reducing stress in the cortical bone. - Thanks to Megagen s unique and super self- tapping design, better initial stability can be attained in any compromised bone situation. The design enables progressive bone condensing, gentle ridge expansion, maximized compressive force resistance and minimized shear force production.

6 AnyOne 06/07 Esthetic & Customized prosthesis AnyOne s cement-retained abutments have a sloped shoulder margin making them ideal for CAD/CAM zirconia prosthetics. Excellent soft tissue response ZrN coating - All abutment cuffs are treated with ZrN coating to ensure excellent aesthetics under the tissue. - The biological S-line provides seamless natural-looking and more functional emergence profile. A B C High compressive strength 1. Wall thickness > Small size (unit : mm) Company A Company B AnyOne Ø3.5 A B C > Regular size (unit : mm) Company A Company B AnyOne A B C Fatigue test Load(Kgf) - can be used to molar area without a concern for fracturing. - AnyOne fixtures have wide parallel-wall design, making them more resistant to fracture than most of other commercialized fixtures. - AnyOne can be used in most cases, reducing the need for GBR Compressive strength 102 Company A Company B AnyOne Performed compressive strength test to compare compression load of AnyOne Fixture with other companies fixture using universal testing machine -R&D center in Megagen Implant Co.,Ltd.(2012) System Fatigue limit AnyOne (Ø3.5 X L7.0mm) Company C (Ø3.6 X L7.0mm) 360.3N 318.2N 1200 AnyOne Company C Load(N) Number of Cycles 360.3N 318.2N Performed fatigue test to compare fatigue limit of AnyOne Fixture with other company fixture using fatigue test machine -R&D center in Megagen Implant Co.,Ltd.(2012)-

7 AnyOne Fixture Product 1) Fixture Normal Thread - Cover Screw included Length(mm) 7.0 IF3507C 8.5 IF3508C Ø3.9 Ø IF3510C 11.5 IF3511C L 13.0 IF3513C Ø IF3515C 7.0 IF4007C 8.5 IF4008C Ø IF4010C 11.5 IF4011C 13.0 IF4013C 15.0 IF4015C 7.0 IF4507C 8.5 IF4508C Ø IF4510C 11.5 IF4511C 13.0 IF4513C 15.0 IF4515C 7.0 IF5007C 8.5 IF5008C Ø IF5010C 11.5 IF5011C 13.0 IF5013C 15.0 IF5015C 7.0 IF6007C Ø IF6008C Ø IF6010C 11.5 IF6011C 13.0 IF6013C Ø IF7007C 8.5 IF7008C Ø7.3 Ø IF7010C 11.5 IF7011C 13.0 IF7013C Ø7.0

8 AnyOne 08/09 Deep Thread - Cover Screw included Length(mm) 7.0 IF4507DC 8.5 IF4508DC Ø IF4510DC 11.5 IF4511DC 13.0 IF4513DC L 15.0 IF4515DC 7.0 IF5507DC 8.5 IF5508DC Ø IF5510DC 11.5 IF5511DC 13.0 IF5513DC 15.0 IF5515DC 7.0 IF6507DC 8.5 IF6508DC Ø5.8 Ø IF6510DC 11.5 IF6511DC 13.0 IF6513DC 15.0 IF6515DC 7.0 IF7507DC 8.5 IF7508DC Ø6.8 Ø IF7510DC 11.5 IF7511DC 13.0 IF7513DC Ø IF7515DC 7.0 IF8007DC Ø IF8008DC Ø IF8010DC 11.5 IF8011DC 13.0 IF8013DC Ø7.5 Special Length - Cover Screw included (mm) Length(mm) IF4507SC Ø4.8 Ø5.3 Ø6.3 Ø IF5007SC Ø6.0 IF6007SC 7 Ø7.0 IF7007SC Ø6.0 Ø7.0

9 2) Cover Screw & Healing Abutment Cover Screw Height(mm) 0.5 CS Used for two stage surgical protocol. Protects the inner portion and platform of the fixture after placing. Uses a Hand Driver (1.2 Hex). H Healing Abutment (mm) Height(mm) 3.0 HA HA4040 H 5.0 HA HA HA HA HA HA HA HA HA HA HA HA5560 Ø HA HA HA6540 Ø HA HA6560 Ø HA HA7540 Ø HA HA7560 Ø HA8540 Ø HA HA8560 Ø HA HA9550 Ø HA9560 Creates the emergence profile of the gingival tissue during healing. Uses a Hand Driver (1.2 Hex).

10 AnyOne 10/11 AnyOne Abutment Options 1) Fixture level prosthesis EZ Post Milling Abutment Angled Abutment Gold Abutment CCM Abutment Temporary Abutment [Titanium] Temporary Abutment [POM] Fuse Abutment Lab Analog Impression Coping [Transfer / 2piece] Impression Coping [Transfer / 1piece] Impression Coping [Pick-up / Hexed] Impression Coping [Pick-up / Non-hexed] Ø3.5 Ø6.0 Ø7.0

11 AnyOne Abutment Options 1) Fixture level prosthesis EZ Post (Hex) - Abutment Screw(AS20) included Profile Ø6.5 Cuff Height(mm) 1.5 Post Height(mm) EP4514HT 2.5 EP4524HT 3.5 EP4534HT 4.5 EP4544HT 5.5 EP4554HT 1.5 EP5514HT 2.5 EP5524HT EP5534HT 4.5 EP5544HT 5.5 EP5554HT 1.5 EP6514HT 2.5 EP6524HT 3.5 EP6534HT 4.5 EP6544HT 5.5 EP6554HT Ø C.H Profile Ø6.5 Cuff Height(mm) 1.5 Post Height(mm) EP4515HT 2.5 EP4525HT 3.5 EP4535HT 4.5 EP4545HT 5.5 EP4555HT 1.5 EP5515HT 2.5 EP5525HT EP5535HT 4.5 EP5545HT 5.5 EP5555HT 1.5 EP6515HT 2.5 EP6525HT 3.5 EP6535HT 4.5 EP6545HT 5.5 EP6555HT 5.5 C.H Cement retained restoration Cuffs of EZ Post are treated with a ZrN coating, to ensure excellent aesthetics under the tissue. Biological S-line provides a seamless natural-looking and more functional emergence profile. Post Height : 4.0, 5.5mm Profile :,, Ø6.5 Cuff Height : 1.5, 2.5, 3.5, 4.5, 5.5mm Recommend Torque : 35Ncm Thread diameter (mm) Length (mm) Ø6.5

12 AnyOne 12/13 EZ Post (Non-hex) - Abutment Screw(AS20) included Profile Ø6.5 Cuff Height(mm) 1.5 Post Height(mm) EP4514NT 2.5 EP4524NT 3.5 EP4534NT 4.5 EP4544NT 5.5 EP4554NT 1.5 EP5514NT 2.5 EP5524NT EP5534NT 4.5 EP5544NT 5.5 EP5554NT 1.5 EP6514NT 2.5 EP6524NT 3.5 EP6534NT 4.5 EP6544NT 5.5 EP6554NT Ø C.H Profile Ø6.5 Cuff Height(mm) 1.5 Post Height(mm) EP4515NT 2.5 EP4525NT 3.5 EP4535NT 4.5 EP4545NT 5.5 EP4555NT 1.5 EP5515NT 2.5 EP5525NT EP5535NT 4.5 EP5545NT 5.5 EP5555NT 1.5 EP6515NT 2.5 EP6525NT 3.5 EP6535NT 4.5 EP6545NT 5.5 EP6555NT Cement retained restoration EZ Post cuffs are treated with a ZrN coating, to ensure excellent aesthetics under the tissue. Biological S-line provides a seamless natural-looking and more functional emergence profile. Post Height : 4.0, 5.5mm Non-Hex Abutments do not provide anti-rotation and are contra-indicated for single unit restorations. Profile :,, Ø6.5 Cuff Height : 1.5, 2.5, 3.5, 4.5, 5.5mm Recommend Torque : 35Ncm Ø C.H

13 Fuse Abutment Design concept of Fuse Abutment Similar to a customized abutment for excellent esthetics! Various Angle : Straight Perfect margin fitness with a prosthetic cap Scalloped outline S-line Mesio-distal Labio-lingual Elliptical Occlusal view like a natural tooth Displacement(mm) Micro-movement test of implant Fuse Abutment area D1 D2 D3 D Force(N) Performed compressive strength test to evaluate the micro-movement for bone density using universal testing machine -R&D center in Megagen Implant Co.,Ltd.(2012)- Compressive strength(n) Rationale of Fuse Abutment Compressive strength test of Fuse Abutment 150 Average < 180N 100 Specimen 1 Specimen 2 50 Specimen 3 Specimen 4 Specimen Displacement(mm) Performed compressive strength test to evaluate the yield strength for Fuse Abutment using universal testing machine -R&D center in Megagen Implant Co.,Ltd.(2012)- In 1992, Brunski JB. reported that an implant may have higher possibility of fibrous-intergration than osseo-integration between bone and implant surface when movements more than100um occurs on the fixture during osseointegration period. (John B. Brunski, Biomechanical factors affecting the bone-dental implant interface. Clinical Materials, Vol. 10, ) Therefore, the implant is needed to be protected not to move when immediate loading is carried out. However, it is not easy to manage loading on the fixture, even when we use a resin temporary with a titanium cylinder. It was thought that it s partly because of the metal component of temporary cylinder, which can deliver excessive forces to the fixture. This is one of the reasons which make clinicians hesitate the immediate loading procedure. So it is necessary to develop a special temporary cylinder. It should be broken under the force which can lead fibrointegration or failure of osseointegration to protect the fixture. and it will be preferred if it is easy to make a temporary crown on this particular temporary cylinder. We tried to measure the force causing movement of 100μm on a fixture which was placed securely into adequate density of bone without defect. First, Any- Ridge implants were placed into the internationally recognized standard bone block with more 40Ncm torque force and an abutment was connected on each implant. Instron was used to measure the force to move a fixture 100μm. The average force was 220N (22.4 kgf). Therefore, If the new temporary abutment can be fractured under this force, it may protect the fixture from movement or failure. From this experiment, we could developed a special temporary abutment which has lower fracture threshold of less than 200 N (20.4 kgf). It was named as Fuse Abutment. Also it has an anatomic profiles to make temporary prosthetics more esthetic.

14 AnyOne 14/15 Fuse Abutment - Abutment Screw(AS20)+Fuse cap included C. H P. H Labiolingual Mesiodistal (mm) (mm) Type 5.5 Straight AOFAP5535P AOFAA5315P 7 25 AOFAA5325P Labio-lingual Mesio distal Mesio distal P.H C.H Labio-lingual Milling Abutment - Abutment Screw(AS20) included Profile Cuff Height(mm) 1.5 Post Height(mm) Type MA4015HT 2.0 MA4520HT 2.0 Hex MA5520HT 4.0 MA5540HT 9.0 C.H 2.5 MA6525HT Ø MA6540HT MA4015NT Ø MA4520NT 2.0 Non- MA5520NT 4.0 Hex MA5540NT Ø MA6525NT 4.0 MA6540NT Ø6.5 Used for abutment design by customized milling. Milling Abutments are treated with a ZrN coating, to ensure excellent aesthetics under the tissue. Available in both hex and Non-Hex, in four diameters (,, & Ø6.5) and in various cuff heights. Recommend Torque : 35Ncm Angled Abutment - Abutment Screw(AS20) included Profile Cuff Height (mm) Post Height (mm) Type Angle 15 o 25 o Hex Nonhex 15 o AA4215HT 25 o AA4225HT 15 o AA4415HT 25 o AA4425HT 15 o AA5215HT 25 o AA5225HT 15 o AA5415HT 25 o AA5425HT 15 o AA4215NT 25 o AA4225NT 15 o AA4415NT 25 o AA4425NT 15 o AA5215NT 25 o AA5225NT 15 o AA5415NT 25 o AA5425NT 2 different angulations (15, 25 ) - Available in two diameters ( & ) and in two cuff heights (2.5 & 4.5mm). Cuffs of Angled Abutment are treated with a ZrN coating, to ensure excellent aesthetics under the tissue. Height of minimized screw head helps to prevent milling problems. Profile s :, Cuff Height : 2.5, 4.5mm Recommend Torque : 35Ncm 15 o 25 o C.H

15 AnyOne Abutment Options 1) Fixture level prosthesis Gold Abutment - Abutment Screw(AS20) included Profile Cuff Height (mm) Post Height (mm) Type Hex Non-hex GA4515HT GA4515NT P.H For fabrication of customized abutment for either screw or cement retained restorations. Available in both hex (red) and non-hex (white) Melting point of gold alloy : 1400~1450 Threaded sleeves allow for better retention of resin or wax. Recommend Torque : 30Ncm C.H CCM Abutment - Abutment Screw(AS20) included Profile Cuff Height (mm) Post Height (mm) Type Hex Non-hex CA4515HT CA4515NT P.H Useful to make a customized abutment in difficult situations. Can be casted with non-precious alloys (Ni-Cr, Cr-Co alloys). Non-precious melting temperature : Depend on Manufacturer Threaded sleeves for convenient Resin / Wax-up. Melting temperature of CCM : C.H Temporary Abutment (Titanium) - Abutment Screw(AS20) included Profile Height(mm) 11.0 Type Hex Non-hex TA4511HT TA4511NT H For making provisional restoration. Available in both hex and non-hex. Grooved surface on abutment post allows for better retention of resin or wax. Temporary Abutment (POM) - Abutment Screw(AS20) included Profile Height(mm) 11.0 Type Hex Non-hex TA4511HPT TA4511NPT H For making chairside provisionals for the aesthetic zone. Especially useful for immediate placement after extraction. Available in both hex and non-hex. Lab Analog Type Color Small Magenta LA350H Regular & Wide Blue LA400H Replicates the fixture. Magenta analog for Ø3.5 fixture. Blue analog for all fixture sizes for ~Ø6.0. Type

16 AnyOne 16/17 Impression Driver * Separate sale item. Type Short *Long TCMID TCMIDE For used for closed tray(transfer) technique Impression Driver seats the Impression Coping with a friction fit and only requires finger pressure to tighten. Impression Coping (Transfer type) - Guide Pin included in two piece type Profile Height (mm) Type (1.2 Hex) 12.0 IT4012HT IT4012HHT 16.0 IT4016HT IT4016HHT 12.0 IT4512HT IT4512HHT 16.0 IT4516HT IT4516HHT 2piece 12.0 IT5512HT IT5512HHT 16.0 IT5516HT IT5516HHT 12.0 IT6512HT IT6512HHT Ø IT6516HT IT6516HHT 12.0 IT4012N IT4012NH 16.0 IT4016N IT4016NH 12.0 IT4512N IT4512NH 16.0 IT4516N IT4516NH 1piece 12.0 IT5512N IT5512NH 16.0 IT5516N IT5516NH 12.0 IT6512N IT6512NH Ø IT6516N IT6516NH s correspond to Healing Abutment diameters. Available in one piece (non-hex) or two piece (hex) and two heights. Used for Closed Tray (Transfer) technique. Impression Coping design ensures easy and accurate transfer of fixture position. Flat surface of Impression Coping aligns with the flat of the hex within the fixture. Impression Driver and Hand Driver(1.2Hex) should be used to ensure Impression Coping is properly tightened. 2piece Ø6.5 1piece Ø6.5 Impression Coping (Pick-up type) - Guide Pin included Profile Height(mm) Type 12.0 IP4012HT 16.0 IP4016HT 7.0 IP4507HT 12.0 IP4512HT Hex 7.0 IP5507HT 12.0 IP5512HT Ø IP6507HT 12.0 IP6512HT 12.0 IP4012NT 16.0 IP4016NT 7.0 IP4507NT 12.0 IP4512NT Non-Hex 7.0 IP5507NT 12.0 IP5512NT Ø IP6507NT 12.0 IP6512NT Used for open tray technique. Most beneficial for multiple fixtures that will be splinted together. Square body design ensures stability within the impression and accurate transfer of fixture position. Hex Ø6.5 Non-Hex Ø6.5

17 AnyOne Abutment Options 2) Abutment level : Solid Abutment prosthesis Burn-out Cylinder Lab Analog Snap Impression Coping Comfort Cap Solid Abutment EZ Post EZ Post and Solid Abutments have the same post size making the Snap Impression Coping and Analog suitable for both. Ø3.5 Ø6.0 Ø7.0

18 AnyOne 18/19 Solid Abutment Profile Cuff Height(mm) 1.5 Post Height(mm) SL SL40254 C.H SL SL SL SL SL SL40355 C.H 4.5 SL SL SL SL SL SL45454 C.H 5.5 SL SL SL SL SL SL C.H 1.5 SL SL SL SL SL45557 Cement retained restoration only. Solid Abutment should be placed into patient s mouth before taking impression. Should be tightened with Solid Driver and Hand Driver. Recommend Torque : 35Ncm Profile :,,, Ø6.5 Cuff Height : 1.5, 2.5, 3.5, 4.5, 5.5mm Post Height : 4.0, 5.5, 7.0mm 7.0 C.H

19 AnyOne Abutment Options 2) Abutment level : Solid Abutment prosthesis Solid Abutment Profile Cuff Height(mm) Post Height(mm) 1.5 SL SL SL55354 C.H 4.5 SL SL SL SL SL SL SL C.H 1.5 SL SL SL SL65454 Ø6.5 Ø SL SL SL C.H SL SL SL65555 Cement retained restoration only. Solid Abutment should be placed into patient s mouth before taking impression. Should be tightened with Solid Driver and Hand Driver. Recommend Torque : 35Ncm Profile :,,, Ø6.5 Cuff Height : 1.5, 2.5, 3.5, 4.5, 5.5mm Post Height : 4.0, 5.5, 7.0mm Ø C.H Comfort Cap Profile Post Height(mm) 4.0 CC CC CC CC CC4570 P.H 4.0 CC CC5555 P.D Ø CC CC6555 Protects a Solid Abutment and minimizes irritation to tongue and oral mucosa. Easily make a temporary crown by resin build up. Color coded according to post heights. [Yellow : P.H 4.0mm, White : P.H 5.5mm, Pink : P.H 7.0mm]

20 AnyOne 20/21 Snap Impression Coping Profile Post Height(mm) 4.0 SIC SIC SIC SIC SIC4570 P.H(7.0) 4.0 SIC SIC5555 P.D Ø SIC SIC6555 Used for precise Impression Coping on Solid Abutment. Color coded for 3 different post heights. [Yellow : P.H 4.0mm, White : P.H 5.5mm, Pink : P.H 7.0mm] Do not use if Solid Abutment has been modified. Lab Analog Profile Height(mm) 4.0 LA4040P 5.5 LA4055P LA4540P 5.5 LA4555P 7.0 LA4570P 4.0 LA5540P 5.5 LA5555P Ø6.5 Ø LA6540P 5.5 LA6555P Used for Solid Abutment Used only if Solid Abutment was not modified. Burn-out Cylinder Profile Type BC4070S Single BC4570S BC5570S Ø6.5 BC6570S BC4070B Bridge BC4570B BC5570B Ø6.5 Ø6.5 BC6570B Precise fit with post of Solid Abutment, EZ Post, Lab Analog. Easy to wax up providing accurate margins and clean burnout. Available in both hex (red) and non-hex (white).

21 AnyOne Abutment Options 2) Abutment level : Abutment prosthesis Gold Cylinder Plastic Cylinder CCM Cylinder EZ Post Cylinder Temporary Cylinder Lab Analog Impression Coping [Transfer] Impression Coping [Pick-up] Abutment Healing Cap Ø3.5 Ø6.0 Ø7.0

22 AnyOne 22/23 Abutment Profile Cuff Height(mm) Ø OA4015 C.H 2.5 OA4025 Ø OA OA OA4055 Ø OA OA5025 Ø OA OA OA OA6015 Ø OA6025 Ø OA OA OA6055 Compatible with AnyRidge, EZ Plus and ExFeel internal system. Used to make multiple screw-retained prosthetics. Compatible with Strauman s Abutment system. Recommend Torque : 35Ncm Maximum path Angle : 70 Healing Cap - Cylinder Screw (IRCS200) included Profile AANOHC4000T IHC400T Ø6.0 AANOHC6000T Protects Abutment and minimizes irritation to tongue and oral mucosa. P.D Impression Coping (Transfer) - Guide Pin included Profile Ø6.0 Height (mm) Type AAOITO4010T AAOITN4010T AAOITO4012T AAOITN4012T AAOITO5010T AAOITN5010T AAOITO5012T AAOITN5012T AAOITO6010T AAOITN6010T AAOITO6012T AAOITN6012T Ø6.0

23 AnyOne Abutment Options 2) Abutment level : Abutment level Impression Coping (Pick-up) - Guide Pin included Profile Height (mm) Type AAOIPO4010T AAOIPN4010T AAOIPO4012T AAOIPN4012T Ø AAOIPO5010T AAOIPN5010T AAOIPO5012T AAOIPN5012T AAOIPO6010T AAOIPN6010T AAOIPO6012T AAOIPN6012T Ø6.0 Lab Analog Profile Ø3.8 AANOLA4000 Ø4.8 IOA300 Ø5.8 AANOLA6000 P.D Temporary Cylinder - Cylinder Screw (IRCS200) included Profile Type AANOTCO4010T AANOTCN4010T AANOTCO5010T AANOTCN5010T Ø6.0 AANOTCO6010T AANOTCN6010T Ø6.0 EZ Post Cylinder - Cylinder Screw (IRCS200) included Profile Post Height(mm) Type 5.5 AAOECO4005T 7.0 AAOECO4007T 5.5 AAOECN4005T 7.0 AAOECN4007T AAOECO5005T 7.0 AAOECO5007T 5.5 AAOECN5005T 7.0 AAOECN5007T Ø AAOECO6005T 7.0 AAOECO6007T 5.5 AAOECN6005T 7.0 AAOECN6007T Ø6.0

24 AnyOne 24/25 Gold Cylinder - Cylinder Screw (IRCS200) included Profile Type AANGCO4000T AANGCN4000T 12 Ø6.0 IOGO100T IOGN100T AANGCO6000T AANGCN6000T For customizing abutment for screw retained multi-unit restoration. - Available in both octa(red) and non-octa(white) Melting point of gold alloy : 1400~1450 Threaded sleeves allow for better retention of resin or wax. Available in three diameters (, & Ø6.0). Recommend torque : 30Ncm Ø6.0 CCM Cylinder - Cylinder Screw (IRCS200) included Profile Type AANCCO4000T AANCCN4000T 12 AANCCO5000T AANCCN5000T Ø6.0 AANCCO6000T AANCCN6000T Useful to make a customized abutment in difficult situations. Can be casted with non-precious alloys (Ni-Cr, Cr-Co alloys). Non-precious melting temperature : Depend on Manufacturer Threaded sleeves for convenient Resin / Wax-up. Melting temperature of CCM : Ø6.0 Plastic Cylinder - Cylinder Screw (IRCS200) included Profile Type AAOTCO4010TT AAOTCN4010T 10 Ø6.0 IOPH100T IOPN100T AAOTCO6010T AAOTCN6010T Economical option Used for customizing abutment for screw retained multi-unit restorations. - Available in both octa(red) and non-octa(white) Threaded sleeves allow for better retention of resin or wax. Ø6.0

25 AnyOne Abutment Options 2) Abutment level : Multi-unit prosthesis EZ Post Cylinder Glod Cylinder CCM Cylinder Plastic Cylinder Temporary Cylinder Lab Analog Impression Coping [Transfer] Impression Coping [Pick-up] Multi-unit Abutment [Straight] Multi-unit Angled Abutment [17 ] Multi-unit Angled Abutment [29 ] Healing Cap Ø3.5 Ø6.0 Ø7.0

26 AnyOne 26/27 Muti-unit Angled Abutment (17 ) - Abutment Screw (MUAS20) included Cuff Height (mm) Type 1.0 MU50117HT 2.0 MU50217HT Hex 3.0 MU50317HT Hex C.H 4.0 MU50417HT 1.0 MU50117NT 2.0 MU50217NT Non-Hex 3.0 MU50317NT 4.0 MU50417NT Non-Hex Muti-unit Angled Abutment (29 ) - Abutment Screw (MUAS20) included Cuff Height (mm) Type 1.0 MU50129HT 2.0 MU50229HT Hex 3.0 MU50329HT Hex C.H 4.0 MU50429HT 1.0 MU50129NT Non-Hex 2.0 MU50229NT Non-Hex 3.0 MU50329NT 4.0 MU50429NT Muti-unit Abutment (Straight) - Muti-unit Abutment Screw included. Cuff Height (mm) Type 1.5 MU5015HT 2.5 MU5025HT Hex 3.5 Hex MU5035HT C.H 4.5 MU5045HT 5.5 MU5055HT 1.5 MU5015NT 2.5 MU5025NT Non-Hex 3.5 Non-Hex MU5035NT 4.5 MU5045NT 5.5 MU5055NT Healing Cap Profile REC600

27 AnyOne Abutment Options 2) Abutment level : Multi-unit level Impression Coping (Transfer) Profile Ø4.8 RITE480 Non-Hex Ø4.8 Impression Coping (Pick-up) - Guide Pin (RICG150) included Height (mm) 9.4 RIEH480T RIEN480T 9.4 Hex Non-Hex Ø4.8 Lab Analog Profile Ø4.8 RELA300 Hex Non-Hex Temporary Cylinder - Cylinder Screw (TASH140) included Profile Ø4.8 ETH100T ETN100T Ø4.8 EZ Post Cylinder - Cylinder Screw (TASH140) included Profile RCA900T RCA800T Hex Non-Hex

28 AnyOne 28/29 Hex Non-Hex Gold Cylinder - Cylinder Screw (TASH140) included Profile Ø4.8 Sleeve color Red White REGC200T REGC100T Ø4.8 Hex Non-Hex CCM Cylinder - Cylinder Screw (TASH140) included Profile Ø4.8 Sleeve color Pink Yellow RCA5013HT RCA5013NT Useful to make a customized abutment in difficult situations. Can be casted with non-precious alloys (Ni-Cr, Cr-Co alloys). Non-precious melting temperature : Depend on Manufacturer Threaded sleeves for convenient Resin / Wax-up. Melting temperature of CCM : Ø4.8 Hex Non-Hex Plastic Cylinder - Cylinder Screw (TASH140) included Profile Ø5.2 Sleeve color Red White RPEH100T RPEN100T Ø5.2

29 Multi-unit Abutment Various Cuff Straight : 1.5, 2.5, 3.5, 4.5, 5.5mm Angled : 1, 2, 3, 4mm Prosthetics compatibillity 3i Multi-unit Abutment Regular Abutment(MegaGen) Various Angle Straight, 17, 29 Multi-unit Abutment Design Concept MEGAGEN IMPLANT develops the special abutment named as Multi-unit Abutment, which can be the solution for the patients with no teeth. With 4 fixtures placed onto patient s ridge and over-denture placed onto those four fixtures, a patient who has no teeth can fully recover his or her dental condition. Multi-unit Abutments are composed of 2 x straight type abutment for anterior position and 2 x angled type abutment on posterior position. Features You could see how Multi-unit Abutment functions and what benefits you could get by using Multi-unit Abutment with the points below: 2 fixtures which are slantly implanted on posterior position are Osseo-integrated with cancellous bone. These fixtures function as dispersing vertical load on alveolar bone. Multi-unit Abutment is only 4 fixtures + 4 abutments. It means that dental surgeon has enough places for surgery. Therefore, it will be easy for you to find and place 4 fixtures onto ridge where abundant cancellous bone exists. Doctor use bone material if patients have no enough alveolar bone. However, Multi-unit Abutment s angle fixture can overcome the client s insuf ficient bone by getting good holding strength by its angle. In addition, angle fixture is used to avoid touching a patient s maxillary nerve and mandibular sinus. Using 4 fixtures means shortened healing time. Also, it leads to lessened inconvenience. Doctor s Benefits Doctor could enjoy Multi-unit Abutment s benefits described as below: It can be used with its cylinder. It means that doctor can change or replaces the final prosthetic easily. Multi-unit Abutment has two type of angle fixture: 17, 29. It means that doctor has various options to one s angle taste. Multi-unit Abutment has various cuff heights (1~5.5): it means that doctor can be flexible from prosthetic angle and fixture s placement depth with cuff s variety. MegaGen s Multi-unit Abutment is perfectly compatible with Multi-unit Abutment made by 3I. MegaGen s Multi-unit Abutment is perfectly compatible with MegaGen s ExFeel External Regular Abutment.

30 AnyOne 30/31 AnyOne Abutment Options 2) Abutment level prosthesis : Flat Abutment prosthesis Flat EZ Post Cylinder Flat Glod Cylinder Flat CCM Cylinder Flat Plastic Cylinder Flat Temporary Cylinder Flat Lab Analog Flat Impression Coping [Transfer] Flat Impression Coping [Pick-up] Flat Healing Abutment Flat Cover Screw Flat Abutment Ø3.5 Ø6.0 Ø7.0

31 AnyOne Abutment Options 2) Abutment level : Flat Abutment prosthesis Flat Abutment Cuff Height (mm) 1.5 FA FA FA FA FA3555 C.H Ø3.5 Ø3.5 Flat Cover Screw Profile 1.0 Ø3.5 FCS3510 Flat Healing Abutment Height (mm) 2.0 FHA FHA FHA404 H Flat Impression Coping - Guide Pin included Height (mm) 9.5 FIT4012T 12.0 FIP4012T Flat Lab Analog Height (mm) 12.0 FLA Ø3.5

32 AnyOne 32/33 Flat Temporary Cylinder - Flat Cylinder Screw (FAS) included Profile FTC4012T Flat EZ Post Cylinder - Flat Cylinder Screw (FAS) included Height (mm) 5.5 FEC4005T FEC4007T Flat Gold Cylinder - Flat Cylinder Screw (FAS) included Profile Profile (mm) Ø3.8 FGC4012T Ø3.8 Flat CCM Cylinder - Flat Cylinder Screw (FAS) included Profile Ø3.8 FCC4012T Useful to make a customized abutment in difficult situations. Can be casted with non-precious alloys (Ni-Cr, Cr-Co alloys). Non-precious melting temperature : Depend on Manufacturer Threaded sleeves for convenient Resin / Wax-up. Melting temperature of CCM : Ø3.8 Flat Plastic Cylinder - Flat Cylinder Screw (FAS) included Profile FPC4012T

33 AnyOne Abutment Options 3) Overdenture prosthesis : Meg-Rhein Overdenture System Retentive Cap Set Lab Analog Impression Coping Meg-Rhein Abutment Ø3.5 Ø6.0 Ø7.0

34 AnyOne 34/35 Meg-Rhein Meg-Rhein Package Cuff Height (mm) - 1 Meg-Rhein Abutment - 1 Plastic Carrier - 1 Stainless Steel Housing - 3 Retentive Caps (Black, Yellow, Pink) 0 DR00 1 DR01 2 DR02 C.H DR03 4 DR04 5 DR05 6 DR06 Perfect compatibility with the Rhein83 from Italy. Recommend torque : 35Ncm. Meg-Rhein Option 4 Retentive Caps (White) 140CET White cap(1.8kg) - For refill (4ea/pack) 4 Retentive Caps (Violet) 140CEV Violet cap(2.7kg) - For refill (4ea/pack) 2 Stainless Steel Housing 2ea/pack 141CAE

35 Meg-Rhein Option 2 Stainless Steel Housings 2ea/pack 141CAE Insertion Tool 085IAC Removal Tool 091EC 90 Stainless Impression Coping (Pick-up) 044CAIN 2ea/pack Italy - Rhein83 products. For accurate (pick-up type) impression. Metal with groove design to prevent from swaying. 5.5 Lab Analog To make denture model. PLA

36 AnyOne 36/37 Overdenture System Meg-Rhein Package * A plastic carrier can be used as an impression coping. Pink Cap Yellow Cap Meg-Rhein Abutment with a Plastic Carrier Black Cap Stainless Steel Housing Advantage 1. Small & Easy-to-use Housing System 2. Tilting Angle & Various Retentive Caps of the Meg-Rhein 3. Low Reduction Rate & Uniform Variance of Retentive Force 2.1mm 4.4mm Meg-Rhein 30º Before After (1,000cycles) 27% 38% 49% % mm mm Product K & L 0 Meg-Rhein Product K Product L Product P 2.3mm 5.2mm Product P *Smaller & more convenient than others, with proven Italian technology. Yellow (0.6kg) Pink (1.2kg) White (1.8kg) Violet (2.7kg) * Seperate purchase available upon request Retentive force (kg) R 2 =0.85 1,000 Cycles R 2 (Coefficient of determination) becomes more reliable when it is close to 1.

37 AnyOne Surgical drilling sequence Surgical drilling sequence - AnyOne fixtures offer optimum initial stability when used with the following drill sequence guide. AnyOne implants should be placed 0.5mm subcrestally. Initial Drill Ø2.8 Final Drill Ø3.3 IF mm Ø3.5 Fixture Ø3.5 drilling sequence Ø3.5 Ø mm 10.0mm 10.0mm is the fixture length and the Shaping Drills are 0.59 longer than the fixture, so total drill depth is 10.59mm. Initial Drill Ø2.8 Ø3.3 Final Drill Ø3.6 IF mm Fixture drilling sequence 9.5mm 10.0mm 10.0mm is the fixture length and the Shaping Drills are 0.68 longer than the fixture, so total drill depth is 10.68mm. Initial Drill Ø2.8 Ø3.3 Ø3.6 Final Drill Ø4.2 IF mm Fixture drilling sequence 9.5mm 10.0mm 10.0mm is the fixture length and the Shaping Drills are 0.85 longer than the fixture, so total drill depth is 10.85mm.

38 AnyOne 38/39 Initial Drill Ø2.8 Ø3.3 Ø3.6 Ø4.2 Final Drill Ø4.8 IF mm Fixture drilling sequence 9.5mm 10.0mm 10.0mm is the fixture length and the Shaping Drills are 0.89 longer than the fixture, so total drill depth is 10.89mm. Initial Drill Ø2.8 Ø3.3 Ø3.6 Ø4.2 Ø4.8 Final Drill Ø5.8 IF mm Ø6.0 Fixture Ø6.0 drilling sequence Ø6.0 Ø mm 10.0mm 10.0mm is the fixture length and the Shaping Drills are 0.94 longer than the fixture, so total drill depth is 10.94mm. Initial Drill Ø2.8 Ø3.3 Ø3.6 Ø4.2 Ø4.8 Ø5.8 Final Drill Ø6.9 IF mm Ø7.0 Fixture Ø7.0 drilling sequence Ø7.0 Ø mm 10.0mm 10.0mm is the fixture length and the Shaping Drills are 0.94 longer than the fixture, so total drill depth is 10.94mm.

39 AnyOne Surgical Kit layout 1) Surgical Kit layout(kaoin3003) Ratchet Wrench Direction Indicator Dense Drill Path Finder Initial Drill Drill Extension Hand Driver Shaping Drill Handpiece Connector Ratchet Connector

40 AnyOne 40/41 Shaping Drill Each drill has depth marking lines from 7.0mm to 15.0mm The dual marking system (grooves and laser markings) provides visual and radiographic depth verification during surgery. 0.5mm Subcrestal concept 9.5mm Fixture length 7.0mm 8.5mm 10.0mm 11.5mm 13.0mm 15.0mm 0.89mm Y length Drill Ø2.8 Ø3.3 Ø3.6 Ø4.2 Ø4.8 Ø5.8 Ø6.9 Y length Actual drill length : Drill lengths do not normally include the Y dimension of the drill. Shaping Drill markings are 0.5mm longer than the fixture so fixtures will automatically be placed 0.5mm subcrestally if the drilling protocol is followed. If placing a x 10mm length fixture, the required bone depth would be 10.89mm. For example : 0.5mm(subcrestal concept) mm(Y dimension of drill tip) + 9.5mm (fixture length) Dense Drill To control initial stability in dense bone (type I & II), use the Dense Drill to remove and shape the cortical bone. D2 Bone In type ll bone, drill to the first line. D1 Bone In type l bone, drill to the second line. Handpiece & Ratchet Connector Gingival level 4mm The platform line of the Handpiece Connector or the Ratchet Connector must be seated flush with the fixture platform. 3mm Bone level 0.5mm Gingival level 3mm Fixture level 0.5mm Fixture level : Placement should be 0.5mm subcrestal. Gingival level : Line is 3mm above the bone level line and 3.5mm above the platform line

41 Surgical Components Initial Drill * Separate sale item. Ø1.8 Length(mm) 33 ID1818S 38 *ID1818M 43 *ID1818L Used to pierce the cortical bone initially. Side cutting feature allows for changing the angle of the initial osteotomy if needed. Advisable to go into the bone to the full length of a fixture. L Shaping Drill * Separate sale item. Length(mm) 33 SD2018S Ø *SD2018M 43 *SD2018L 33 SD2518S Ø *SD2518M 43 *SD2518L 33 SD2818S Ø *SD2818M 43 *SD2818L 33 SD3318S Ø *SD3318M 43 *SD3318L 33 SD3618S Ø *SD3618M 43 *SD3618L 33 SD4218S Ø *SD4218M 43 *SD4218L 33 SD4818S Ø *SD4818M 43 *SD4818L 33 SD5818S Ø *SD5818M 43 *SD5818L 33 SD6918S Ø *SD6918M 43 *SD6918L Each drill has depth marking lines from 7.0mm to 15.0mm. The dual marking system(grooves and laser markings) provides visual and radiographic depth verification during surgery. AITiN coating on drills : Enhanced corrosion resistance and abrasion resistance. Ø2.0 Ø3.3 Ø4.8 Ø2.5 Ø3.6 Ø5.8 Ø2.8 Ø4.2 Ø6.9 L Dense Drill Type Ø3.9 DD39 Ø4.3 DD43 Ø4.8 DD48 Long Ø5.3 DD53 Ø6.3 DD63 Ø7.3 DD73 Used to remove and shape cortical bone to control initial stability in dense bone (type I & II). AITiN coating on drills : Enhanced corrosion resistance and abrasion resistance. 33

42 AnyOne 42/43 Handpiece Connector * Separate sale item. System AnyOne Type *Ultra-short Short HCU25 HCS25 Long HCL25 MiNi Short Long HCS17 HCL17 Used with Handpiece to remove fixture from ampule and to place the fixture. Spring type connection allows for easy and secure pick-up and positioning of the fixture. First mark on the shaft indicate the position of the fixture platform, For second mark, the bottom of the black line is 3mm and the top of the black line is 4mm(from fixture platform). Especially useful in flapless surgery. AnyOne MiNi Ratchet Connector * Separate sale item. System Type *Ultra-short RCU25 AnyOne Short RCS25 Long RCL25 MiNi Short Long RCS17 RCL17 Used for inserting or removing a fixture with the Ratchet Wrench. Check to make sure the Ratchet Connector is completely seated into the Ratchet Wrench before using. Excessive force can cause damage to internal hex of fixture. Marks on the shaft indicate the position of fixture platform. Bottom of the black line is 3mm and top of black line is 4mm(from fixture platform). Especially useful in flapless surgery. AnyOne MiNi Hand Driver (1.2 Hex) * Separate sale item. Length(mm) Type 5 *Ultra-short TCMHDU Short TCMHDS Long TCMHDL *Extra-long TCMHDE1200 Used for all Cover Screws, all abutment screws and all Healing Abutments. Available in 4 lengths for added convenience. Hand Driver can be directly inserted into the Torque Wrench without using an adapter. Hex tip can withstand 35-45Ncm of torque without distorting. L

43 Surgical Components Drill Extension MDE150 No more than 35Ncm torque : May be distorted when excessive force is applied. Extends drills & other handpiece instruments. Direction Indicator Ø2.0 ~ Ø2.8 MDI100 Confirms drilling direction and functions as a parallel guide for additional osteotomies. Each end of the Direction Indicator has a different diameter - Ø2.0 and Ø2.8. Ø2.8 Ø2.0 Path Finder Length(mm) 15 PF After the fixture is placed, a Path Finder may be connected into the fixture and function as a parallel guide for additional osteotomies. Grooves indicate the distance from the fixture platform.the first groove is 0.3mm and the second groove is 1mm especially useful in flapless surgery. 15 Ratchet Wrench MRW040S Used to exert more force than the Handpiece. No bearing system : No breakage and no corrosion problems. Arrow laser marking indicates direction of force.

44 AnyOne 44/45 AnyOne Surgical Kit layout 2) Stopper Drill Kit (KAOSS3000) Ø2.0 Ø2.8 Ø3.3 Ø3.6 Ø4.2 Ø4.8 7mm 8.5mm AnyOne R Stopper Drill Kit 10mm 11.5mm OPTION Stopper Drill * Separate sale item. Length(mm) 7 SD2007M Ø SD2008M 10 SD2010M 11.5 SD2011M 7 SD2807M Ø SD2808M 10 SD2810M 11.5 SD2811M 7 SD3307M Ø SD3308M 10 SD3310M 11.5 SD3311M 7 SD3607M Ø SD3608M 10 SD3610M 11.5 SD3611M 7 SD4207M Ø SD4208M 10 SD4210M 11.5 SD4211M 7 SD4807M Ø SD4808M 10 SD4810M 11.5 SD4811M 7 SD5807M *Ø SD5808M 10 SD5810M 11.5 SD5811M 7 SD6907M *Ø SD6908M 10 SD6910M 11.5 SD6911M L

45 AnyOne Surgical Kit layout 3) Prosthetics Kit (KAOPK3000) Driver Torque Wrench Impression Driver Hand Driver Ball Abutment Driver Solid Driver

46 AnyOne 46/47 Surgical Components Torque Wrench & Adapter * Separate sale item. Solid Driver Torque Wrench *Torque Wrench Adapter(Handpiece) Torque Wrench Adapter(Ratchet) Ø6.5 Type Length(mm) Type MTW300A TTAI100 TTAR100 Torque Wrench has torque options from 15Ncm to 45Ncm and is used for final tightening of the abutment screw into the fixture 6 Short SDS40 12 Long SDL40 6 Short SDS45 12 Long SDL45 6 Short SDS55 12 Long SDL55 6 Short SDS65 12 Long SDL65 For seating the Solid Abutment onto the fixture. Connected to Torque Wrench as well. Color coded for different profile diameters. (Magenta : PD ø4.0, Blue : PD ø4.5, Yellow : PD ø5.5, Green : PD ø6.5) Two different length(6mm/ 12mm). Handpiece Ratchet L Driver Ball Driver Impression Driver Length(mm) 7 MOD300S 13 MOD300L Length(mm) Short Long For seating the Abutment onto the fixture. Connected to Torque Wrench as well. Type Handpiece Connector(Short) Handpiece Connector(Long) Ratchet Extension(Short) Ratchet Extension(Long) Torque Driver(Short) Torque Driver(Long) TCMID TCMIDE For transfer type of Impression Coping. Works with friction only. Small but powerful grip. TBH250S TBH250L TBR250S TBR250L TBT250S TBT250L For seating the Ball Abutment onto the fixture. Can connect to a Handpiece, Ratchet or Torque Wrench. Available in long or short. Handpiece Connector Ratchet Extension Torque Driver L

47 AnyOne Surgical Kit layout 4) BonEx Kit (KBECS3000) Expander Length (mm) Marking line (mm) Ø2.4 TCMBE2413 Ø2.8 TCMBE2813 Ø3.3 7 / 8.5 / 10 / TCMBE Ø3.8 TCMBE3813 Ø4.3 TCMBE4313 Ø4.8 TCMBE4813 Ratchet Connector (TANRES) Handpiece Connector Chisel Tip Chisel Handle (TCMSC403) (TANHCU) (TANHCS) option Lance Drill (MGD100L) Ratchet Connector (TANREL)

48 AnyOne 48/49 Optional Surgical Components Trephine Bur Type Ø3.5(in Ø2.5) TANTBL2535 (in ) Ø6.0(in ) Short (32mm) TANTBL4050 TANTBL5060 Ø7.0(in Ø6.0) Ø3.5(in Ø2.5) (in ) Ø6.0(in ) Long (38mm) TANTBL6070 TANTBE2535 TANTBE4050 TANTBE Ø7.0(in Ø6.0) TANTBE6070 D Minimizes the drilling steps needed - Especially for wider fixtures. Helpful for collecting autogenous bone. Useful for removing failed and fractured fixtures. Depth markings are 7, 8.5, 10, 11.5, 13mm, same depths as fixtures. (No Y dimension so markings are actual length). Markings on the drill shaft represent the inside / outside diameter of Trephine Burs. Trephine Bur Stopper Length (mm) Connection 7.0 TANTSF TANTSF TANTSF TANTSF2311 Controls the depth of trephination with a Stopper placed into the Trephine. Especially useful in cases with limited height bone. L Trephine Bur Stopper Bottom Drill Type Ø3.3 TCMBDS33 Ø3.8 TCMBDS38 Ø4.8 Short (32mm) TCMBDS48 Ø5.8 TCMBDS58 Ø6.8 TCMBDS68 Ø3.3 TCMBDL33 Type Ø3.8 TCMBDL38 Ø4.8 Long (38mm) TCMBDL48 Ø5.8 TCMBDL58 Ø6.8 TCMBDL68 It removes remaining bone in osteotomy socket after trephine drilling. It imprints the sizes of fixtures, for example 7, 8.5, 10, 11.5 and 13mm, by laser marker. D 7 (7.5) 8.5 (9) (12) (10.5) 13 (13.5)

49 Reamer Drill & Center Pin Type Reamer Drill(Ø9.4) Center Pin() Center Pin() Center Pin() Center Pin(Ø6.5) TANRD RDJ40 RDJ45 RDJ55 RDJ65 Removes inner lip of the cast after casting Burn-out- Cylinders of Solid Abutment. Center Pin have 4 different diameters according to the profile diameter of Solid Abutments. Slot Driver (Slotted type) Length(mm) Type 10 Short SDS06 15 Middle SDM06 20 Long SDL06 Multi-unit Driver (2.0 Hex) (For Multi-unit Abutment) Length(mm) Type 10 Short TCMMUDS20 15 Long TCMMUDL20 L Hand Driver (1.6 Hex) Length(mm) Type 10 Short TCMHDS Long TCMHDL1600 L

50 AnyOne 50/51 Extra Option Products 1) i-gen i-gen Screw Type Cuff Height (mm) - Use Hand Driver(1.6 Hex) 1.0 IA2010 C.H M IA IA2030 MegaGen (AnyOne, EZ Plus(R&W) & MegaFix) Straumann (Standard & Standard Plus) : Ø3.3, 4.1, 4.8 Nobel Biocare (Nobel Replace Tapered Groovy) : Ø4.3, 5.0, 6.0 Astra (Osseospeed) :, 5.0, 5.0S Dentium (Superline) : Ø3.6, 4.0, 4.5, 5.0, 6.0, 7.0 Dio (Steady) : Ø3.8, 4.0, 4.5, 5.0, 6.0, 6.5, 7.0 Dio (SM) : Ø3.8, 4.1, 4.5, 5.0, 5.3, 5.9, 6.4, 6.9 Dio (IFI) : Ø3.5, 4.0, 4.8, 6.5 Neobiotech (IS) : Ø3.5, 4.0, 4.5, 5.0 (IT) : Ø3.5, 4.0, 5.0 Osstem (TSⅥ) :, 4.5, 5.0, 6.0, 7.0 (SSⅡ SA) :, 4.5, 5.0 Dentis (S-clean) : Ø3.7, 4.1, 4.3, 4.8 (i-clean) : Ø3.7, 4.1, 4.3, 4.8 i-gen Cover Screw - Use Hand Driver(1.2 Hex) Type Height (mm) Hex ICS i-gen Membrane Type PL Proximal Length BW Buccal width BL Buccal Length BD Buccal Distance LW Lingual width LL Lingual Length A IG1W4509 A IG1W5510 A1 B1 C1 A IG1W6511 B IG2W0918 B IG2W1120 A2 B2 C2 B IG2W1323 C IG3W0921 C IG3W1125 C IG3W1328 A3 B3 C3 BD LL BW PL LW BL

51 i-gen Design concept of i-gen Compatible with other implant brands now! Lingual Extension should be considered for a large defect. Need to have at least 1mm of space above the platform of a fixture: Make this space with a pre-existing abutment, eg, i-gen Screw. 2mm >2.5mm horizontal extension needed to make >2mm labial bone after remodeling. >100 blunt angle with bevel should be made to avoid soft tissue irritation. 0.5~1.0mm shrinkage will occur after removal of membrane. Apical skirt should be adapted to the bone. Ideal regeneration line Ideal + Regeneration membrane i-gen membrane 1. Place an implant into the recipient site. 2. Connect a i-gen Screw to the implant and bone grafting. Usually 1 mm cuff height is good enough for vertical space, but 2 or 3 mm cuff height of i-gen Screw can be chosen according to situation. The amount of graft material should be enough to fill the space between i-gen and the fixture. 3. Selection of i-gen and placement. According to the size and shape of bone defect, an i-gen can be chosen from 9 different shapes. Match the hole of i-gen with the screw hole of i-gen Screw. 4. Fixate i-gen with a i-gen Screw. Choose a i-gen Cover Screw or Flat Healing Abutment to fix i-gen membrane depend on the need of one or two stage surgery. And tight adaptation of soft tissue flap is recommended. * Flat Healing Abutment : P

52 AnyOne 52/53 2) MEG-TORQ / MEGA ISQ The SmartPeg is attached to an implant. It screws effortlessly into the implant s inside thread. The hand-held probe stimulates the SmartPeg magnetically, without actually being connected to it or even touching it. An ISQ value is generated and shown on the display. It reflects the level of stability on the universal ISQ scale from 1 to 100. The higher the ISQ value, the more stable the implant. SmartPeg Thread (mm) 1.8 OSSTELL-AR67 Recommend torque : 8~10Ncm Uses Right Angled Driver (3.0 Hex Driver) 12 MEG-TORQ MEGA-TORQ Right Angle Driver (mm) (3.0 Hex) 4.2 RDI30U MEGA ISQ OSSTELL-ISQ

53 EZ Seal 2.1 Compatible implants MegaGen Astra Nobelbiocare 3mm 2.2 Compatible implants MegaGen Neobiotech Dio Straumann Dentis Nobelbiocare Osstem Neobiotech Dentium Astra Small Change Makes a Big Difference!!! 3mm 2.4 Compatible implants MegaGen Astra Dio 3i Dentis Straumann Osstem Nobelbiocare Neobiotech Small Change Makes a Big Difference!!! 3mm 3.1 Compatible implants MegaGen Dentis Osstem Neobiotech Small Change Makes a Big Difference!!! 3) EZ Seal How to seal a screw hole? Try Easy Seal! Foul odor? Bacterial colony? Metal hue? Hard to remove? Inconvenient process? Easy to fill & Remove Convenient size : (Ø2.1, Ø2.2, Ø2.4, Ø3.1) Length (1, 2, 3, 4, 5mm and free) Convenient tools : EZ carrier Retrievable material (Silicon) Implant completed in a simple and convenient way! IMPLAN T Carrier 1mm 2mm 3mm 1mm2 mm 3mm 4mm5 mm Free 4mm 5mm FREE Resin TIP! EZ Seal Choice Choose EZ Seal length which is Depth 3mm (resin)! Resin 3mm EZ Seal Implant completed in a simple and convenient way! 1. Measure depth 2. Fill the EZ Seal 3. Fill the resin 4. Perfect final prosthetic Choose appropriately for your system! Resin 3mm Carrier 2.1 Resin EZ Seal Carrier 2.2 Resin EZ Seal Carrier 2.4 Resin EZ Seal Carrier 3.1 Implant completed in a simple and convenient way! Implant completed in a simple and convenient way! Implant completed in a simple and convenient way! Implant completed in a simple and convenient way! Ref. C : EZSP21K System : AnyRidge Ref. C : EZSP22K System : AnyOne Ref. C : EZSP24K System : EZ Plus, MegaFix Ref. C : EZSP31K System : Rescue

54 AnyOne 54/55 4) 911kit (KPSCS3000) Hex Hex Kit Fixture Removal Kit (KPSFS3000)

55 911kit Components Fixture Remover Applied Fixture Ø3.0~Ø3.6 Length(mm) 15 FSS FSL3035 Ø3.7~Ø4.6 Ø4.7~Ø FSS FSL FSS FSL4555 L Ø5.7~Ø FSS FSL6080 To remove the broken fixture. When selecting a Fixture Remover, consider the outer diameter of a fixture. In case of AnyRidge Internal Fixture that the thread is formed under platform, select a Fixture Remover according to platform size Fixture Remover Screw Applied Fixture Thread M1.4(MiNi) M1.6(EZ Plus, ExFeel Ø3.3) M1.8(AnyRidge) M2.0(AnyOne, MegaFix, EZ Plus, ExFeel) FSS14 FSS16 FSS18 FSS20 M2.5(Rescue) FSS25 To connect fixture and Fixture Remover. Recommended tightening torque FSS14, FSS16 : 40~50 Ncm FSS18, FSS20, FSS25 : 70~80 Ncm. Torx Driver Length (mm) 5 TD05 15 TD15 20 TD20 To connect fixture to Fixture Remover Screw L Torque Wrench Type 300Ncm TW500 70Ncm TW70 TW500 : To check torque force when removing fixture. TW70 : To check torque force when tightening Fixture Remover Screw.

56 AnyOne 56/57 Abutment Remover Length (mm) 22 ASS 27 ASL On fractured abutment. Use screw size M1.8 & M2.0. L Screw Remover Length (mm) 30 SSS 45 SSL To remove fractured screw. Use screw size M1.8 & M2.0. L Screw Remover Guide Applied Fixture Internal Length(mm) 10 SSIG10 16 SSIG16 22 SSIG22 22 SSIG22W External Hex 2.4 Hex 2.7 SSEG24 SSEG27 Hex 3.3 SSEG33 To secure the Screw Remover from moving side to side when removing the screw. Screw Remover Guide Holder SSGH Tool to supporting the Screw Remover Guide. Hex Remover Length (mm) 22 HSS 27 HSL To remove hex-damaged Abutment Screw, Cover Screw or Healing Abutment. L

57 911kit Fixture Remover Fixture Remover Screw: Single use only Do not use in case of a gap in Fixture Remover Remove the prosthesis of the fi xture to be removed, and the surrounding bone. Select a Fixture Remover Screw of the same size as the fixture internal screw. Use the Torx Driver to turn the screw clockwise (40Ncm~70Ncm) to place in the fixture. (Use of torque less than 40Ncm for M1.6, and 60Ncm for other products may lead to loosening) Select a Fixture Remover that fits the fixture diameter. Turn the fixed Fixture Remover Screw counterclockwise until it touches the fixture. (For a torque of greater than 300Ncm, it is recommended to use a Trephine bur) Fixture and Fixture Remover are tightly connected as rising force and descending force are combined. (Suction is needed; debris may happen on removal of a fixture) Using Torque Wrench, turn counterclockwise and pull out fixture and Fixture Remover. (No more than maximum torque per fixture) Removed fixture can be pulled out, turning Fixture Remover and fixture clockwise, holding onto vice plier. Abutment Remover Can use for abutments that use M1.8 & M2.0 screws. Cannot use for abutment that use M1.6 and M2.5 Insert the Abutment Remover in the fractured abutment hole. Use the Ratchet Wrench to turn clockwise in order to join the abutment and the Abutment Remover as one body. (Ratchet Wrench is included in surgical kit) Move the Abutment Remover sideways while pulling up to remove it. (Use of excessive force may traumatize the fixture or the bone) Secure the separated abutment in a vice or vice pliers. Use the Ratchet Wrench to turn counterclockwise to separate the abutment with the Abutment Remover.

58 AnyOne 58/59 Screw Remover Remove the broken Abutment Screw and the abutment. Select the correct Screw Remover Guide that fits the fixture connection to join. Secure the Screw Remover Guide and insert the Screw Holder in the Screw Remover Guide hole. Push the Screw Remover downwards while rotating counter clockwise to separate it from the fixture internal screw. (rpm:30~50, Torque : 30Ncm) Remove the pieces of broken screw from the fixture internal screw using forceps. When separating the holder from the guide, push in the direction of the arrow to separate. Hex Remover In case Abutment Screw, Cover Screw or Healing Abutment s hex is fractured. Use the Ratchet Wrench to turn counterclockwise to join the abutment with the Abutment Remover as one body. (Use a torque of less than 40Ncm., Ratchet Wrench is included in surgical kit.) Place the removed abutment in the vice. Use the Ratchet Wrench to turn clockwise to separate the abutment with the Hex Remover.