Tri-Lobe System Catalog

Transcription

1 Tri-Lobe System Catalog RePlus ReActive TM RePlant

2 Table of Contents Page # Implant Design & Surface Implant Dimensions & Labeling RePlant, RePlus & ReActive TM All-in-One Packaging Procedures for Titanium Temporary Abutment/Fixture-Mount Selection Chart: Implants & Abutments Healing Collars, Transfers, Analogs & Alignment Tools simplycrown & bridge SMART PACKS, Straight Abutments & Ancillary Components Abutments for Partially Edentulous Restorations Procedure for Offset Contoured Abutments & Lab Alignment Tools Gold, Plastic & Titanium Engaging & Non-Engaging Abutments Multi-Unit, Ball, LOCATOR Abutments & Components Surgical & Prosthetic Instruments RePlus & ReActive TM Surgical Drills, Drills Sequence & Trays RePlant Surgical Drills, Drills Sequence & Trays 30-33

3 Implant Design & Surface Mini-Threads with Double-lead Threads for Faster Insertion The bodies of the RePlus and ReActive TM implants are tapered evenly from the top to facilitate insertion into an undersized socket in soft bone providing compression that increases initial stability (G. Niznick: Clinical Oral Health 2000 Achieving Success in Soft Bone ). The RePlant implant is designed with a straight/tapered profile matching that of the NobelReplace * Implant (Nobel Biocare TM ). Minithreads start 1.0mm below the crest of the bone and extend approximately 2.0 mm before transitioning into double-lead threads to the apex of the implant. The mini-threads, half the depth and pitch of the double-lead body threads, reduce stress in the critical crestal bone region, while double-lead threads reduce the number of turns required to seat the implant. Vertical cutting grooves extend halfway up the implant from the apex for self-tapping insertion. All three implants are available with SBM textured surface over the entire implant and HA is an option for ReActive TM. Standard V-Thread Standard V-Thread Buttress Thread Quadruple Lead Mini- Threads 0.3mm All three Implant Direct Tri-Lobe implants have Mini-threads for reduced stress near the crest of bone, and double-lead threads on the body for 2X faster insertion 0.45mm 0.6mm The 1.5 o taper to the OD of the RePlus and ReActive TM implants facilitate bone expansion for increased stability. 0.85mm Double Lead Threads 1.5 Deg. OD Taper RePlant duplicates the body design of NobelReplace 1.5 Deg. OD Taper 1.5 Deg. ID Taper RePlus features threads with the same 1.5 o taper to the inside (ID) and outside (OD) thread diameters for optimum soft bone compression 3.0 Deg. ID Taper ReActive TM offers greater thread engagement by tapering the inside thread diameter (ID) at 3 o while the outside thread diameter (OD) tapers at 1.5 o 1.5 Deg. OD Taper SBM and HA Coated Surface Options SBM surface is created by using a Soluble Blast Media of Hydroxylapatite (HA) crystals to create a medium-rough texture. We use the same vendor for its SBM and HA coated surface treatments as used by Paragon Implant Company from when these studies were conducted. SEM Examination of Our Surfaces Mini-threads textured by blasting with SBM : Blasted with Soluble HA Particles HA Coating: High Crystalline 40u layer ReActive TM Implant has an HA option. Animal Studies Bone Response to SBM Surface SBM Surface 20X SBM Surface 50X HA Surface 20X HA Surface 50X *Registered Trademark of Nobel Biocare 1

4 Implant Design & Dimensions with NobelReplace * Compatible Tri-Lobe Connection RePlus and ReActive TM Implants 3.5mmD Platform 4.3mmD Platform 5.0mmD Platform 3.0mmL 4.0mmL 0.3mm Supra-Crestal 1mm Unthreaded Collar M1.8 Internal Thread M2.0 Internal Thread Implant Length (13mm) SBM Surface Texture 3.7mmD RePlus 3.1mmD Apex 4.2mmD RePlus 3.6mmD Apex 4.7mmD RePlus 4.1mmD Apex 5.7mmD RePlus 5.1mmD Apex RePlant Implants 3.5mmD Platform 4.3mmD Platform 5.0mmD Platform 6.0mmD Platform 1mm Unthreaded Collar 3.0mmL 4.0mmL Implant Length (13mm) M1.8 Internal Thread M2.0 Internal Thread 5.8mmL 6.1mmL 6.5mmL 6.9mmL SBM Surface Texture 3.5mmD RePlant 2.6mmD Apex 4.3mmD RePlant 2.7mmD Apex 5.0mmD RePlant 3.1mmD Apex 6.0mmD RePlant 3.7mmD Apex 2 *Registered Trademark of Nobel Biocare

5 Labeling RePlant Implant Vial and Cap Label 1 60 = RePlant SBM 43 = 4.3mmD body diameter 13 = 13mmL body length RePlant Implant SBM Qty: 1 Size: 4.3mmD x 13mmL, 4.3mmD Platform Use by date XXXX-XX-XX Do not open if damaged Do not re-use Consult instructions for use 11 Made in USA 13 (XX)XXXXXXXXXXXXXX(XX)XXXXXX(XX)XXXXX RePlant Implant XXXXX RePlant Implant XXXXX RePlant Prosthetic Vial and Cap Label 1 60 = RePlant prosthetics 43 = 3.4mmD platform diameter -21= prosthetic specific code RePlant Straight Abutment Includes: Dual-Grip Screw, Transfer & Comfort Cap Size: Platform: 4.3mm Qty: 1 Do not re-use Do not open if damaged Consult instructions for use 10 Made in USA (XX)XXXXXXXXXXXXXX(XX)XXXXXX(XX)XXXXX RePlant Abutment XXXXX RePlant Abutment XXXXX ) Our products carry the CE mark and fulfill the requirements of the Medical Device Directive 93/42/EEC 2) Manufacturer Symbol 3) Product code or reference number 4) Product 5) Item quantity 6) Product dimensions 7) Use by date (XXXX-XX) 8) Tamper proof symbol 9) Refer to Instructions For Use (IFU) 10) Do not re-use symbol 11) Sterilized using gamma irradiation symbol 12) Caution: US law restricts the sale of these devices by or on the order of a dentist or physician 13) Country of origin 14) Unique Device Identification (UDI) barcode and text 15) Lot number (XXXXXX) 16) Implant prosthetic platform diameter (written and color-coded) 17) Implant diameter color reference on surgical tray 18) Non-sterile symbol 3

6 RePlant RePlant Two-Piece Implant System Featuring: Straight/Tapered body design and dimensions match NobelReplace * Tapered Groovy implant allowing insertion with Nobel Biocare s drills Tri-Lobe color-coded platform is compatible with NobelReplace * abutments SBM (Soluble Blast Media) textured surface to top of implant Color-coded Fixture-Mount usable as a transfer and shortened for use as a temporary abutment Use of titanium alloy for an increase in strength compared to Nobel Biocare s Tri-Lobe implants manufactured from CP titanium Carrier/Transfer All-in-One Packaging 3.5mmD Platform 4.3mmD Platform 5.0mmD Platform 6.0mmD Platform Cover Screw 3.5mmD Implant 4.3mmD Implant 5.0mmD Implant 6.0mmD Implant Placing Carrier/Transfers & Making Impressions Color-coded Titanium Fixture-Mount carrier Align flat to labial for indexing of tri-lobe Fixture-Mount is screw-retained Use Fixture-Mount as closed tray transfer 4 *Registered Trademark of Nobel Biocare

7 RePlant RePlant : Two-Piece Implant Use RePlant surgical tray or Nobel Biocare s Tapered Replace * implant drills for insertion of RePlant implant SBM Surface Implants 3.5mmD Includes Fixture-Mount, Dual-Grip Fixation and Cover Screw Diameter Length Platform mmD 8mmL 3.5mmD mmD 10mmL 3.5mmD mmD 11.5mmL 3.5mmD mmD 13mmL 3.5mmD mmD 16mmL 3.5mmD mmD Diameter Length Platform mmD 8mmL 4.3mmD mmD 10mmL 4.3mmD mmD 11.5mmL 4.3mmD mmD 13mmL 4.3mmD mmD 16mmL 4.3mmD mmD Diameter Length Platform mmD 8mmL 5.0mmD mmD 10mmL 5.0mmD mmD 11.5mmL 5.0mmD mmD 13mmL 5.0mmD mmD 16mmL 5.0mmD mmD Diameter Length Platform mmD 8mmL 6.0mmD mmD 10mmL 6.0mmD mmD 11.5mmL 6.0mmD mmD 13mmL 6.0mmD mmD 16mmL 6.0mmD Replacement Surgical Cover Screws Components include Dual-Grip feature for use with 1.25mmD Hex Tool or Nobel Unigrip ScrewDriver Platform mmD mmD mmD mmD *Registered Trademark of Nobel Biocare

8 RePlus RePlus Two-Piece Implant System Featuring: Tri-Lobe color-coded platform is compatible with NobelReplace * abutments Color-coded Fixture-Mount usable as a transfer and shortened for use as a straight final abutment with snap-on comfort cap Surface options: SBM (Soluble Blast Media) Platform-switching with RePlant and NobelReplace * abutments Fixture-Mount Transfer All-in-One Packaging 3.5mmD Platform 4.3mmD Platform 5.0mmD Platform Snap-On Cover Screw Comfort Cap 3.7mmD & 4.2mmD Implant 4.7mmD Implant 5.7mmD Implant Fixture-Mount/Transfer: Shortened for final abutment with Snap-on Comfort Cap and Transfer step 1 step 2 step 3 step 4 6 *Registered Trademark of Nobel Biocare

9 RePlus RePlus : Two-Piece Implant SBM Surface Implants 3.7mmD Includes Fixture-Mount with Dual-Grip Fixation Screw, Cover Screw and Comfort Cap SBM Diameter Length Platform mmD 8mmL 3.5mmD mmD 10mmL 3.5mmD mmD 11.5mmL 3.5mmD mmD 13mmL 3.5mmD mmD 16mmL 3.5mmD mmD SBM Diameter Length Platform mmD 8mmL 3.5mmD mmD 10mmL 3.5mmD mmD 11.5mmL 3.5mmD mmD 13mmL 3.5mmD mmD 16mmL 3.5mmD mmD SBM Diameter Length Platform mmD 8mmL 4.3mmD mmD 10mmL 4.3mmD mmD 11.5mmL 4.3mmD mmD 13mmL 4.3mmD mmD 16mmL 4.3mmD mmD SBM Diameter Length Platform mmD 8mmL 5.0mmD mmD 10mmL 5.0mmD mmD 11.5mmL 5.0mmD mmD 13mmL 5.0mmD mmD 16mmL 5.0mmD

10 ReActive TM ReActive TM Two-Piece Implant System Featuring: Tri-Lobe color-coded platform is compatible with NobelReplace * abutments Color-coded Fixture-Mount usable as a transfer and shortened for use as a platform-switching straight final abutment Surface options: SBM (Soluble Blast Media) or HA-coated Platform-switching with RePlant and NobelReplace * abutments Buttress threads with increased thread depth providing greater surface area for bone attachment and primary implant stability Fixture-Mount Transfer All-in-One Packaging 3.5mmD Platform 4.3mmD Platform 5.0mmD Platform Cover Screw 3.7mmD & 4.2mmD Implant 4.7mmD Implant 5.7mmD Implant Placing Carrier/Transfers & Taking Impressions Fixture-Mount/Transfer: Shortened to fabricate final abutment step 1 step 2 Color-coded titanium Fixture-Mount carrier Align flat to labial for indexing of tri-lobe Fixture-Mount is screw retained Use Fixture-Mount as closed tray transfer 8 *Registered Trademark of Nobel Biocare

11 ReActive TM : Two-Piece Implant ReActive TM SBM and HA Surface Implants 3.7mmD Includes Fixture-Mount with Dual-Grip Fixation Screw and Cover Screw SBM HA Diameter Length Platform mmD 8mmL 3.5mmD mmD 10mmL 3.5mmD mmD 11.5mmL 3.5mmD mmD 13mmL 3.5mmD mmD 16mmL 3.5mmD mmD SBM HA Diameter Length Platform mmD 8mmL 3.5mmD mmD 10mmL 3.5mmD mmD 11.5mmL 3.5mmD mmD 13mmL 3.5mmD mmD 16mmL 3.5mmD mmD SBM HA Diameter Length Platform mmD 8mmL 4.3mmD mmD 10mmL 4.3mmD mmD 11.5mmL 4.3mmD mmD 13mmL 4.3mmD mmD 16mmL 4.3mmD mmD SBM HA Diameter Length Platform mmD 8mmL 5.0mmD mmD 10mmL 5.0mmD mmD 11.5mmL 5.0mmD mmD 13mmL 5.0mmD mmD 16mmL 5.0mmD

12 All-in-One Packaging The RePlant, RePlus and ReActive TM implants are mounted on color-coded Fixture-Mounts, designed for use as implant level transfers or shortened to function as abutments. A cover screw is included in each vial. The RePlus Fixture-Mount is provided with a snap-on comfort cap. Prepare surgical site with double cutting step drill All the implants come in a sterile vial Each label is color-coded with two tear-off labels Each cap is color-coded by platform diameter of implant Drop implant assembly out of vial onto a sterile surface Remove implant assembly with a Fixture-Mount drill or ratchet Insert implant into osteotomy Index Fixture-Mount flat to labial Remove Fixture-Mount The flat of the Fixture-Mount aligned the lobe to the labial Remove the holder containing the cover screw & comfort cap Snap-on comfort cap is located in the top portion of holder Attach Fixture-Mount to corresponding color-coded implant analog Remove colored section from Fixture-Mount through groove to create abutment Attach abutment using 30Ncm in hard bone & finger pressure in soft bone Check for occlusal clearance prior to attaching comfort cap Test retention & rotate if necessary to increase retention Suture soft tissue around comfort cap 10

13 Clinical Procedures for Titanium Temporary Abutment/RePlant Fixture-Mount 1. Unthread the healing collars from the implant using appropriate driver. The top of the implants are exposed. 2. Use the prepared implant Fixture-Mount as a temporary abutment (reshaping of tri-lobe at apex is essential) or select the Titanium Temporary Abutment matching the implant prosthetic platform. 3. Place the fixation screw through the abutment and tighten in place using the appropriate driver. The torque value of the fixation screw is determined by clinician. Standard torque value is 30Ncm. 4. Confirm there is less than 40 degrees of relative divergence between abutments to be splinted together. 5. Mark position of Titanium Temporary Abutments on under surface of denture with indelible marker. 6. Use acrylic trimmer to drill holes through denture corresponding to marked positions. 7. Seat denture over Titanium Temporary Abutment to confirm passive placement. Check occlusion with opposing arch. Occlude screw access hole with cotton pellet. 8. Use autopolymerizing acrylic or similar light cure material to attach prosthesis to Titanium Temporary Abutments. Allow to set prior to removal from mouth. 9. Remove prosthesis from the mouth, flip over to expose tissue side. Use additional autopolymerizing resin to fill in any voids around the processed abutments. 10. Optional step: Attach implant analogs to base of denture. Pour a soft tissue working cast to prevent engagement with undercuts. Articulate with opposing arch. 11. Remove denture and trim the prosthesis to allow access for patient cleaning. The prosthesis is now a fixed restoration, removable by clinician only. 12. Attach prosthesis to implants and tighten in place using the appropriate tooling. Occlude screw access holes with material of choice. 11

14 Selection Chart: Implants & Abutments 3.5mmD Platform 4.3mmD Platform Carrier/Transfer Cover Screws, Healing Collars, Implant Transfers & Analogs N N N N Straight Abutments, Comfort Caps, Transfers & Analogs Straight & Angled Contoured Abutments C 30/60/ C C 30/60/ C 30/60/ C C C C Lab Abutments & Engaging & Non-Engaging Abutments L L Ball, LOCATOR & Multi-Unit Abutments L L L L L L L L L L L 12 non-engaging

15 5.0mmD Platform 6.0mmD Platform Carrier/Transfer Carrier/Transfer Carrier/Transfer N N N N C C C C 30/60/ C C 30/60/ C C C C 30/60/ /60/ L L L L L L L L 13

16 Healing Collars, Transfers, Analogs & Alignment Tools Healing Collars Components include Dual-Grip feature for use with 1.25mmD Hex Tool or Nobel Unigrip ScrewDriver Width Length Platform mmD 3mmL 3.5mmD mmD 5mmL 3.5mmD mmD 3mmL 4.3mmD mmD 5mmL 4.3mmD mmD 3mmL 5.0mmD mmD 5mmL 5.0mmD mmD 3mmL 6.0mmD mmD 5mmL 6.0mmD Narrow Healing Collars Components include Dual-Grip feature for use with 1.25mmD Hex Tool or Nobel Unigrip ScrewDriver Width Length Platform N 3.5mmD 3mmL 3.5mmD N 3.5mmD 5mmL 3.5mmD N 4.3mmD 3mmL 4.3mmD N 4.3mmD 5mmL 4.3mmD N 5.0mmD 3mmL 5.0mmD N 5.0mmD 5mmL 5.0mmD N 6.0mmD 3mmL 6.0mmD N 6.0mmD 5mmL 6.0mmD N N N N N N N N Closed-Tray Implant Transfers Includes Dual-Grip Fixation Screw Platform Replacement Screw - Pack of mmD mmD mmD mmD Open-Tray Implant Transfers Includes Long Fixation Screw [Requires 1.25mmD Hex Tool] Platform Replacement Screw - Pack of mmD mmD mmD mmD Implant Analogs Platform mmD mmD mmD mmD Lab Abutment Alignment Tools Platform mmD mmD mmD mmD

17 simplycrown&bridge SMART PACKS & Straight Abutments simplycrown & bridge SMART PACKS Includes Straight Abutment, Transfer, Analog, Castable Coping, Comfort Cap & Fixation Screw with Dual-Grip Platform Collar Heights Replacement Screw K 3.5mmD 1mm K 3.5mmD 2mm K 3.5mmD 3mm K 4.3mmD 1mm K 4.3mmD 2mm K 4.3mmD 3mm K 5.0mmD 1mm K 5.0mmD 2mm K 5.0mmD 3mm K 6.0mmD 1mm K 6.0mmD 2mm K 6.0mmD 3mm Choose the convenience of a SMART PACK or select individual components Straight Abutments Includes Transfer, Comfort Cap & Fixation Screw with Dual-Grip Platform Collar Heights Use Analog Replacement Screw mmD 1mm mmD 2mm mmD 3mm mmD 1mm mmD 2mm mmD 3mm mmD 1mm mmD 2mm mmD 3mm mmD 1mm mmD 2mm mmD 3mm

18 Straight Abutment Components Straight Abutment Transfers Abutment Width mmD mmD mmD mmD Straight Abutment Comfort Caps Abutment Width mmD mmD mmD mmD Straight Abutment Analogs Includes Castable Coping Abutment Width mmD mmD mmD mmD Straight Abutment Castable Copings 16 Abutment Width mmD mmD mmD mmD

19 Straight & Angled Contoured, Titanium & Zirconia Abutments Straight Titanium Contoured Abutments Includes Dual-Grip Fixation Screw Platform Collar Heights Replacement Screw mmD 1mm mmD 2mm mmD 1mm mmD 2mm mmD 1mm mmD 2mm mmD 1mm mmD 2mm Angled Titanium Contoured Abutments Includes Dual-Grip Fixation Screw Platform Collar Heights Replacement Screw mmD 0.75mm mmD 2mm mmD 0.75mm mmD 2mm mmD 0.75mm mmD 2mm mmD 0.75mm mmD 2mm , 8 & 15 Angled Zirconia Contoured Abutments Includes Dual-Grip Fixation Screw Platform Angulation Collar Heights Replacement Screw C 3.5mmD 0 1mm C 3.5mmD 0 2mm C 3.5mmD 8 1mm C 3.5mmD 8 2mm C 3.5mmD 15 1mm C 3.5mmD 15 2mm CB 3.5mmD - 0.5mm C C C C C C CB Platform Angulation Collar Heights Replacement Screw C 4.3mmD 0 1mm C 4.3mmD 0 2mm C 4.3mmD 8 1mm C 4.3mmD 8 2mm C 4.3mmD 15 1mm C 4.3mmD 15 2mm CB 4.3mmD - 0.5mm C C C C C C CB Platform Angulation Collar Heights Replacement Screw C 5.0mmD 0 1mm C 5.0mmD 0 2mm C 5.0mmD 8 1mm C 5.0mmD 8 2mm C 5.0mmD 15 1mm C 5.0mmD 15 2mm CB 5.0mmD - 0.5mm C C C C C C CB 17

20 Angled, Contoured & Lab Titanium Abutments Straight Contoured Abutments with 30, 60 & 90 Degree offset Tri-Lobe Includes Dual-Grip Fixation Screw Collar Heights Platform Replacement Screw mm 3.5mmD mm 3.5mmD mm 3.5mmD mm 4.3mmD mm 4.3mmD mm 4.3mmD mm 5.0mmD mm 5.0mmD mm 5.0mmD mm 6.0mmD mm 6.0mmD mm 6.0mmD Angled Contoured Abutments with 30, 60 & 90 Degree offset Tri-Lobe Includes Dual-Grip Fixation Screw Collar Heights Platform Replacement Screw mm 3.5mmD mm 3.5mmD mm 3.5mmD mm 4.3mmD mm 4.3mmD mm 4.3mmD mm 5.0mmD mm 5.0mmD mm 5.0mmD Straight Full Contour Abutments Includes Dual-Grip Fixation Screw Collar Heights Platform Replacement Screw L - 3.5mmD L - 4.3mmD L - 5.0mmD L - 6.0mmD L L L L Replacement Fixation Screws Components include Dual-Grip feature for use with 1.25mmD Hex Tool or Nobel Unigrip ScrewDriver Platform mmD - Short - Pack of mmD - Long - Pack of mmD - Pack of , 5.0 and 6.0mmD - Short - Pack of L 4.3, 5.0 and 6.0mmD - Pack of , 5.0 and 6.0mmD - Long - Pack of , 5.0 and 6.0mmD - Pack of L

21 Contoured Abutments with 0, 30, 60 or 90 Degree Tri-Lobe Offset Implant with tri-lobe aligned to labial. Rotate transfer and seat mating tri-lobes. Make transfer impression using vinyl polysiloxane material. Attach transfer to matching colored implant analog. Insert transfer and pour impression. Evaluate rotational position of tri-lobe for selection of straight and Angled contoured abutments 0 degrees offset 30 degrees offset 60 degrees offset 90 degrees offset 1. Tri-Lobe aligned perpendicular to labial. (0 degrees offset) 1. Tri-Lobe aligned 30 degrees counter-clockwise to line perpendicular to labial. 1. Tri-Lobe aligned 60 degrees counter-clockwise to line perpendicular to labial. 1. Tri-Lobe aligned 90 degrees counter-clockwise to line perpendicular to labial. 2. Dimple of Alignment Tool is perpendicular to labial: 0 degree offset of implant tri-lobe. 2. Dimple on the tool is 1 facet (30 degrees) counter-clockwise to line perpendicular to labial. 2. Dimple on the tool is 2 facets (60 degrees) counter-clockwise to line perpendicular to labial. 2. Dimple on the tool is 3 facets (90 degrees) counter-clockwise to line perpendicular to labial. 3. Use 0 degree tri-lobe offset Contoured Abutment when tool is inserted as above. 3. Use 30 degree tri-lobe offset Contoured Abutment when tool is inserted as above. 3. Use 60 degree tri-lobe offset Contoured Abutment when tool is inserted as above. 3. Use 90 degree tri-lobe offset Contoured Abutment when tool is inserted as above. 19

22 Engaging & Non-Engaging Abutments Gold Engaging Cast-to Abutments Includes Dual-Grip Fixation Screw Collar Heights Platform Replacement Screw mm 3.5mmD mm 4.3mmD mm 5.0mmD Gold Non-Engaging Cast-to Abutments Includes Dual-Grip Fixation Screw Collar Heights Platform Replacement Screw mm 3.5mmD mm 4.3mmD mm 5.0mmD Plastic Non-Engaging Castable Abutments Includes Dual-Grip Fixation Screw Collar Heights Platform Replacement Screw mmD mmD mmD mmD Plastic Engaging Temporary Abutments Includes Dual-Grip Fixation Screw Collar Heights Platform Replacement Screw mmD mmD mmD mmD Scan Adapters Collar Heights Platform Replacement Screw P - 3.5mmD P - 4.3mmD P - 5.0mmD P - 6.0mmD P P P P Titanium Non-Engaging Temporary Abutments Includes Dual-Grip Fixation Screw 20 Collar Heights Platform Replacement Screw mmD mmD mmD mmD

23 Selection Chart: Overdenture & Screw-Retained Restorations 3.5mmD Platform 4.3mmD Platform 5.0mmD Platform 6.0mmD Platform Multi-Unit Abutments (*Includes Transfer and Comfort Cap) Multi-Unit Abutment Transfers, Analog & Comfort Cap Open-Tray Transfer Closed-Tray Transfer * * Multi-Unit Copings P Gold Titanium Plastic Gold/Plastic Titanium PEEK Scan Adapter Ball Abutments (**Includes Transfer and Comfort Cap) Ball Attachments ** ** LOCATOR Abutments L L L L L L L L L L L L L L L L L LOCATOR Attachments L L C-L G-L R-L E-L C-L G-L R-L E-L L L L L P-L B-L Z-L L P-L B-L Z-L L S-L S-L SI-L SI-L SI-L L L L Abutments are compatible with Zimmer, BioHorizons (internal) and MIS Implants with 3.5mm, 4.5mmD and 5.7mmD prosthetic platforms 21

24 Multi-Unit & Ball Abutments simplyfixed SMART PACKS Includes Multi-Unit Abutment, Abutment Analog, Transfer, Titanium Temporary Abutment, Comfort Cap, Fixation Screw Collar Heights Platform Angle K 2mm 3.5mmD K 4mm 3.5mmD K 4mm 3.5mmD K 4mm 3.5mmD K 2mm 4.3mmD K 4mm 4.3mmD K 4mm 4.3mmD K 4mm 4.3mmD K 1mm 5.0mmD K 2mm 5.0mmD K 4mm 5.0mmD K 4mm 5.0mmD 30 Choose the convenience of a SMART PACK or select individual components Multi-Unit Abutments Collar Heights Platform mm 3.5mmD mm 3.5mmD mm 3.5mmD mm 4.3mmD mm 4.3mmD mm 4.3mmD mm 5.0mmD mm 5.0mmD mm 5.0mmD mm 6.0mmD mm 6.0mmD mm 6.0mmD Includes Transfer & Comfort Cap [Requires 1.25mmD Hex Tool] & 30 Multi-Unit Angled Abutments Includes Dual-Grip Abutment Screw, Transfer & Comfort Cap [Screw Top requires 2.5mmD Hex Tool] Platform Angled Abutment 3.5mmD Angled Abutment 4.3mmD Angled Abutment 5.0mmD Angled Abutment 3.5mmD Angled Abutment 4.3mmD Angled Abutment 5.0mmD Ball Abutments Includes Transfer & Comfort Cap [Requires 1.25mmD Hex Tool] Collar Heights Platform mm 3.5mmD mm 3.5mmD mm 4.3mmD mm 4.3mmD mm 5.0mmD mm 5.0mmD mm 6.0mmD mm 6.0mmD

25 LOCATOR Abutments & Angled Base Components LOCATOR Abutments Requires LOCATOR insertion tool Collar Heights Platform L 0mm 3.5mmD L 1mm 3.5mmD L 2mm 3.5mmD L 3mm 3.5mmD L 4mm 3.5mmD L 5mm 3.5mmD L 0mm 4.3mmD L 1mm 4.3mmD L 2mm 4.3mmD L 3mm 4.3mmD L 4mm 4.3mmD L 5mm 4.3mmD L 1mm 5.0mmD L 2mm 5.0mmD L 3mm 5.0mmD L 4mm 5.0mmD L 5mm 5.0mmD L L L L L L L L L L L L L L L L L Multi-Unit Abutment Comfort Cap, Transfers & Analog Screws require 1.25mmD Hex Tool Platform mmD Aluminum Analog mmD Open-Tray Transfer plus Fixation Screw mmD Closed-Tray Transfer plus Fixation Screw mmD Plastic Abutment Transfer - Pack of mmD Plastic Comfort Cap - Pack of Replacement Open-Tray Fixation Screw - Pack of Replacement Closed-Tray Fixation Screw - Pack of Replacement Tops for Angled Abutments Includes Transfer & Comfort Cap Replacement Screw Top for Angled Base [Requires 2.5mmD Hex Tool] Replacement Ball Top for Angled Base [Requires 1.25mmD Hex Tool]

26 Ancillary Components for Overdenture & Screw-Retained Restorations Multi-Unit Abutment Components Includes Fixation Screw [ ], optional Dual-Grip Fixation Screw [ ] Platform mmD Gold Coping mmD Titanium Coping mmD Plastic Coping mmD Gold & Plastic Coping mmD Titanium Temporary Coping Coping Fixation Screw - Pack of Dual-Grip Coping Fixation Screw - Pack of P - Multi-Unit Scan Adapter - New P Ball Abutment Components Ball Abutment Housing - Pack of Nylon Liner - Pack of Nylon Liner Transfer - Pack of Ball Abutment Transfer - Pack of Ball Abutment Analog Ball Abutment Tools Ball Abutment Comfort Cap - Pack of Ball Abutment Housing & Nylon Liner LOCATOR Abutment Transfer, Analogs and Alignment Tools L4 Impression Coping - Pack of L20 Impression Coping - Pack of L4 Abutment Analog 4mmD - Pack of L20 Abutment Analog 4mmD - Pack of L4 Abutment Parallel Post - Pack of Comfort Cap - Pack of L Angle Measure Guide L L L L L L20 LOCATOR Abutment Components Retention Pack of 4 Pack of kg Male Blue (up to 20 ) B-L B-L kg Male Pink (up to 20 ) P-L P-L kg Male Clear (up to 20 ) C-L C-L kg Male Gray (up to 40 ) Z-L Z-L kg Male Red (up to 40 ) R-L R-L kg Male Orange (up to 40 ) E-L E-L kg Male Green (up to 40 ) G-L G-L20 - Processing Male Black L L B-L B-L P-L P-L R-L R-L E-L E-L L L10 Retention Pack of 4 Pack of 20 - Block-Out Spacer 0.4mm L L C-L C-L G-L G-L SI-L SI-L SI-L10 Retention Pack of 4 Pack of 10 - Metal Cap + Processing Male Black L L Z-L Z-L L L20 Retention Pack of 1 Pack of 2 Pack of 10 Assorted Male Processing Package (up to 20 ) SI-L SI-L SI-L10 Assorted Male Processing Package (up to 40 ) S-L S-L L L S-L S-L10 24

27 Surgical & Prosthetic Instruments Tapered Hex Tools THT1.25 THT1.25S Straight Hex Tools 1.25mmD Tapered Hex Tool - Long 1.25mmD Tapered Hex Tool - Short HT1.25L 1.25mmD Straight Hex Tool - Extra Long (For use with Torque Wrench) HT mmD Straight Hex Tool - Long (For use with Torque Wrench) HT1.25S 1.25mmD Straight Hex Tool - Short (For use with Torque Wrench) HT mmD Straight Hex Tool - Long HT2.0S 2.0mmD Straight Hex Tool - Short HT mmD Straight Hex Tool - Long (with retentive O-ring) HT2.5S 2.5mmD Straight Hex Tool - Short (with retentive O-ring) HT mmD Straight Hex Tool - Long HT3.0S 3.0mmD Straight Hex Tool - Short HT2.0LG 2.0mm Hex Tool - Long - New HT2.0SG 2.0mm Hex Tool - Short - New HT2.5LG 2.5mm Hex Tool - Long - New HT2.5SG 2.5mm Hex Tool - Short - New HT3.0LG 3.0mm Hex Tool - Long - New HT3.0SG 3.0mm Hex Tool - Short - New HT1.25L THT1.25 THT1.25S HT1.25 HT2.0 HT2.5 HT3.0 HT1.25S HT2.0S HT2.0LG HT2.0SG HT2.5LG HT2.5SG HT2.5S HT3.0S HT3.0LG HT3.0SG Hex Driver HD1.25 HD2.0 HD2.5 HD3.0 HD2.0SG HD2.5SG HD3.0SG Ancillary Instruments 1.25mmD Hex Driver 2.0mmD Hex Driver 2.5mmD Hex Driver (with retentive O-ring) 3.0mmD Hex Driver 2.0mm Hex Driver - Short - New 2.5mm Hex Driver - Short - New 3.0mm Hex Driver - Short - New R Ratchet TW30 30Ncm Torque Wrench TW35 35Ncm Torque Wrench SSH mmD Stainless Steel Handle (with retentive O-ring) FMD Fixture-Mount Drill PAR Paralleling Tool 2.8/2.3 LDRILL Locator Drill DE Drill Extender TWM Multi-Setting Torque Wrench (15, 20, 25, 30, 35, 40, 45, 50 & 60Ncm) ABH Analog Holder LDD LOCATOR Driver 29mm Handpiece LDDS LOCATOR Driver 23mm Handpiece LDT LOCATOR Square Driver 21mm Wrench LDTS LOCATOR Square Driver 15mm Wrench L LOCATOR Core Tool HD1.25 HD2.0 HD2.5 HD3.0 HD2.0SG HD2.5SG HD3.0SG R TW30 TW35 SSH2.5 TWM FMD PAR LDRILL DE ABH LDD - LDDS LDT - LDTS L Surgical Trays ST BST CST RST RBST RCST Empty Surgical Tray for RePlus & ReActive TM System Implants Basic Surgical Tray for RePlus & ReActive TM System Implants Surgical Tray for RePlus & ReActive TM System Implants Empty Surgical Tray for RePlant System Implants Basic Surgical Tray for RePlant System Implants Surgical Tray for RePlant System Implants ST RST BST RBST CST RCST 25

28 Surgical Drills: RePlus & ReActive TM Implants Pilot Drills SD2.3 SD2.3S SD2.8 SD2.8S SD2.3 SD2.3S SD2.8 SD2.8S 2.3/2.0mmD Step Drill with 6-16 markings 2.3/2.0mmD Step Drill with 6-10 markings 2.8/2.3mmD Step Drill with 6-16 markings 2.8/2.3mmD Step Drill with 6-10 markings 3.7mmD Implants SD3.4 SD3.4S CBD3.7 SD3.4 SD3.4S CBD /2.8mmD Step Drill with 6-16 markings 3.4/2.8mmD Step Drill with 6-10 markings Cortical Bone Drill for 3.7mmD Implants 4.2mmD Implants SD3.8 SD3.8S CBD4.2 SD3.8 SD3.8S CBD /3.4mmD Step Drill with 6-16 markings 3.8/3.4mmD Step Drill with 6-10 markings Cortical Bone Drill for 4.2mmD Implants 4.7mmD Implants SD4.4 SD4.4S CBD4.7 SD4.4 SD4.4S CBD /3.8mmD Step Drill with 6-16 markings 4.4/3.8mmD Step Drill with 6-10 markings Cortical Bone Drill for 4.7mmD Implants Optional Drills SD4.8SD4.8S SD4.8 SD4.8S 4.8/4.4mmD Step Drill with 6-16 markings 4.8/4.4mmD Step Drill with 6-10 markings 5.7mmD Implants D5.1 D5.1S SD5.4 SD5.4S CBD5.7 D mmD Straight Drill with 6-16 markings D5.1S 5.1mmD Straight Drill with 6-10 markings SD /4.8mmD Step Drill with 6-16 markings SD5.4S 5.4/4.8mmD Step Drill with 6-10 markings CBD5.7 Cortical Bone Drill for 5.7mmD Implants 26

29 RePlus & ReActive TM Drill Sequence 3.7mmD RePlus & ReActive TM Tapered Implant Soft Bone Final Dense Bone Final Optional Bone Contour SD /2.0mmD SD /2.3mmD SD /2.8mmD CBD mmD RePlus & ReActive TM Tapered Implant Optional Soft Bone Final Dense Bone Final Optional Bone Contour SD /2.0mmD SD /2.3mmD SD /2.8mmD SD /3.4mmD CBD mmD RePlus & ReActive TM Tapered Implant Optional Soft Bone Final Dense Bone Final Optional Bone Contour SD /2.0mmD SD /2.3mmD SD /2.8mmD SD /3.4mmD SD /3.8mmD CBD mmD RePlus & ReActive TM Tapered Implant Optional Optional Optional Soft Bone Final Dense Bone Final Optional Bone Contour SD /2.0mmD SD /2.3mmD SD /2.8mmD SD /3.4mmD SD /3.8mmD SD /4.4mmD D mmD SD /4.8mmD CBD5.7 27

30 Complete Surgical Tray Contents SD2.8 SD2.8S CBD3.2 SD3.4 SD3.4S CBD3.7 SD3.8 SD3.8S CBD4.2 SD4.4 SD4.4S CBD4.7 SD4.8 SD4.8S CBD5.2 D5.1 D5.1S SD2.3 SD2.3S SD5.4 SD5.4S Optional place for InterActive tools (not included) CBD5.7 THT1.25 HT1.25 HT2.0 HT2.5 HT3.0 THT1.25S HT1.25S HT2.0S HT2.5S HT3.0S lower level of surgical tray LDRILL DE R FMD HD1.25 HD2.0 HD2.5 HD3.0 SSH2.5 PAR (4) 28

31 ReActive TM /RePlus Surgical Tray Lid Inside Empty Tray Surgical Tray Contents Complete Tray Basic Tray ST Empty Surgical Tray X X SD /2.0mmD Step Drill-Long X X SD2.3S 2.3/2.0mmD Step Drill-Short X SD /2.3mmD Step Drill-Long X X SD2.8S 2.8/2.3mmD Step Drill-Short X CBD mmD Cortical Drill X SD /2.8mmD Step Drill-Long X X SD3.4S 3.4/2.8mmD Step Drill-Short X CBD mmD Cortical Drill X SD /3.4mmD Step Drill-Long X X SD3.8S 3.8/3.4mmD Step Drill-Short X CBD mmD Cortical Drill X SD /3.8mmD Step Drill-Long X X SD4.4S 4.4/3.8mmD Step Drill-Short X CBD mmD Cortical Drill X SD /4.4mmD Step Drill-Long X X SD4.8S 4.8/4.4mmD Step Drill-Short X CBD mmD Cortical Drill X D mmD Straight Drill-Long X X D5.1S 5.1mmD Straight Drill-Short X SD /4.8mmD Step Drill-Long X X SD5.4S 5.4/4.8mmD Step Drill-Short X CBD mmD Cortical Drill X Hex Tools THT mmD Tapered Hex Tool-Long X X THT1.25S 1.25mmD Tapered Hex Tool-Short X HT mmD Straight Hex Tool-Long X X HT1.25S 1.25mmD Straight Hex Tool-Short X HT mmD Hex Tool-Long X X HT2.0S 2.0mmD Hex Tool-Short X HT mmD Hex Tool-Long X X HT2.5S 2.5mmD Hex Tool-Short X HT mmD Hex Tool-Long X X HT3.0S 3.0mmD Hex Tool-Short X HD mmD Hex Drill X X HD mmD Hex Drill X HD mmD Hex Drill X X HD mmD Hex Drill X Ancillary Instrumentation FMD Fixture-Mount Drill X LDRILL Locator Drill X X DE Drill Extender X X R Ratchet X X PAR (x4) Paralleling Tool 2.8/2.3 X X SSH mmD Stainless Steel Handle X 29

32 Surgical Drills: RePlant & NobelReplace Tapered Groovy Implants* Pilot Drills for All Implants SD2.3 SD2.3S SD2.3 SD2.3S 2.3/2.0mmD Step Drill with 6-16 markings 2.3/2.0mmD Step Drill with 6-10 markings Soft Bone Drills RSB3 RSB3S RSB4 RSB4S RSB5 RSB5S RSB6 RSB6S 2.8/2.3mmD Step Drill for 3.5mmD Implant 2.8/2.3mmD Short Step Drill for 3.5mmD Implant 3.4/2.8mmD Step Drill for 4.3mmD Implant 3.4/2.8mmD Short Step Drill for 4.3mmD Implant 4.2/3.3mmD Step Drill for 5.0mmD Implant 4.2/3.3mmD Short Step Drill for 5.0mmD Implant 5.1/4.2mmD Step Drill for 6.0mmD Implant 5.1/4.2mmD Short Step Drill for 6.0mmD Implant RSB3 RSB3S RSB4 RSB4S RSB5 RSB5S RSB6 RSB6S Dense Bone Drills RDB3 RDB4 RDB5 RDB6 RDB3 RDB4 RDB5 RDB6 3.2mmD Dense Bone Drill for 3.5mmD Implant 4.0mmD Dense Bone Drill for 4.3mmD Implant 4.7mmD Dense Bone Drill for 5.0mmD Implant 5.7mmD Dense Bone Drill for 6.0mmD Implant RePlant Insertion Tools Square connection for use with Ratchet or Torque Wrench RTT3 RTT4 RTT5 RTT6 RTT3 RTT4 RTT5 RTT6 RTT3SG RTT4SG RTT5SG RTT6SG RTT3LG RTT4LG RTT5LG RTT6LG Tri-Lobe Insertion Tool for 3.5mmD Implant Tri-Lobe Insertion Tool for 4.3mmD Implant Tri-Lobe Insertion Tool for 5.0mmD Implant Tri-Lobe Insertion Tool for 6.0mmD Implant Tri-Lobe Insertion Tool for 3.5mmD Implant - Short - New Tri-Lobe Insertion Tool for 4.3mmD Implant - Short - New Tri-Lobe Insertion Tool for 5.0mmD Implant - Short - New Tri-Lobe Insertion Tool for 6.0mmD Implant - Short - New Tri-Lobe Insertion Tool for 3.5mmD Implant - Long - New Tri-Lobe Insertion Tool for 4.3mmD Implant - Long - New Tri-Lobe Insertion Tool for 5.0mmD Implant - Long - New Tri-Lobe Insertion Tool for 6.0mmD Implant - Long - New RTT3SG RTT3LG RTT4SG RTT4LG RTT5SG RTT5LG RTT6SG RTT6LG RePlant Insertion Driver Latch head connection for use with Surgical Motor RTD3 RTD4 RTD5 RTD6 RTD3 RTD4 RTD5 RTD6 RTD3SG RTD4SG RTD5SG RTD6SG Tri-Lobe Insertion Driver for 3.5mmD Implant Tri-Lobe Insertion Driver for 4.3mmD Implant Tri-Lobe Insertion Driver for 5.0mmD Implant Tri-Lobe Insertion Driver for 6.0mmD Implant Tri-Lobe Insertion Driver for 3.5mmD Implant - Short - New Tri-Lobe Insertion Driver for 4.3mmD Implant - Short - New Tri-Lobe Insertion Driver for 5.0mmD Implant - Short - New Tri-Lobe Insertion Driver for 6.0mmD Implant - Short - New RTD3SG RTD4SG RTD5SG RTD6SG 30 *Registered Trademark of Nobel Biocare

33 RePlant Drill Sequence 3.5mmD RePlant Straight / Tapered Implant Soft Bone Final Dense Bone Final SD /2.0mmD RSB3 2.8/2.3mmD RDB3 3.2mmD 4.3mmD Straight / Tapered Implant Optional Soft Bone Final Dense Bone Final SD /2.0mmD RSB3 2.8/2.3mmD RSB4 3.4/2.8mmD RDB4 4.0mmD 5.0mmD Straight / Tapered Implant Optional Soft Bone Final Dense Bone Final SD /2.0mmD RSB3 2.8/2.3mmD RSB4 3.4/2.8mmD RSB5 4.2/3.3mmD RDB5 4.7mmD 6.0mmD Straight / Tapered Implant Optional Soft Bone Final Dense Bone Final SD /2.0mmD RSB3 2.8/2.3mmD RSB4 3.4/2.8mmD RSB5 4.2/3.3mmD RSB6 5.1/4.2mmD RDB6 5.7mmD 31

34 Surgical Tray for RePlant & NobelReplace Tapered Groovy Implants* SD2.3 SD2.3S RSB3 RSB3S RDB3 RSB4 RSB4S RDB4 RSB5 RSB5S RDB5 RSB6 RSB6S RDB6 THT1.25 HT1.25 THT1.25S HT1.25S LDRILL DE FMD HD1.25 PAR (4) HT2.5 lower level of surgical tray HT2.5S RTT3 RTT4 RTT5 RTT6 R HD2.5 RTD3 RTD4 RTD5 RTD6 SSH *Registered Trademark of Nobel Biocare

35 Surgical Trays - RePlant Complete & Basic Lid Inside Empty Tray Surgical Tray Contents Complete Tray Basic Tray RST Empty Surgical Tray X X SD /2.0mmD Step Drill-Long X X SD2.3S 2.3/2.0mmD Step Drill-Short X RSB3 2.8/2.3mmD Step Drill for 3.5mmD Implant X X RSB3S 2.8/2.3mmD Short Step Drill for 3.5mmD Implant X RSB4 3.4/2.8mmD Step Drill for 4.3mmD Implant X X RSB4S 3.4/2.8mmD Short Step Drill for 4.3mmD Implant X RSB5 4.2/3.3mmD Step Drill for 5.0mmD Implant X X RSB5S 4.2/3.3mmD Short Step Drill for 5.0mmD Implant X RSB6 5.1/4.2mmD Step Drill for 6.0mmD Implant X X RSB6S 5.1/4.2mmD Short Step Drill for 6.0mmD Implant X RDB3 3.2mmD Dense Bone Drill for 3.5mmD Implant X X RDB4 4.0mmD Dense Bone Drill for 4.3mmD Implant X X RDB5 4.7mmD Dense Bone Drill for 5.0mmD Implant X X RDB6 5.7mmD Dense Bone Drill for 6.0mmD Implant X X THT mmD Tapered Hex Tool-Long X X THT1.25S 1.25mmD Tapered Hex Tool-Short X HT mmD Straight Hex Tool-Long X X HT1.25S 1.25mmD Straight Hex Tool-Short X HT mmD Straight Hex Tool-Long X HT2.5S 2.5mmD Straight Hex Tool-Short X X HD mmD Hex Drill X X HD mmD Hex Drill X RTT3 Tri-Lobe Insertion Tool for 3.5mmD Implant X X RTT4 Tri-Lobe Insertion Tool for 4.3mmD Implant X X RTT5 Tri-Lobe Insertion Tool for 5.0mmD Implant X X RTT6 Tri-Lobe Insertion Tool for 6.0mmD Implant X X RTD3 Tri-Lobe Insertion Drill for 3.5mmD Implant X RTD4 Tri-Lobe Insertion Drill for 4.3mmD Implant X RTD5 Tri-Lobe Insertion Drill for 5.0mmD Implant X RTD6 Tri-Lobe Insertion Drill for 6.0mmD Implant X FMD Fixture-Mount Drill X X LDRILL Locator Drill X DE Drill Extender X X R Ratchet X X PAR (x4) Paralleling Tool 2.8/2.3 X SSH mmD Stainless Steel Handle X 33

36 CAT-TRILOBE-EN, printed Implant Direct Europe AG Hardturmstrasse 161 CH-8005 Zürich Tollfree Infoline