(Xi;R36,R38,R43) Talc

Transcription

1 Resin Systems Limited Material Safety Data Sheet Printed: 25/10/ :18 Page 1/5 1 Substance Identification (Synonym:) Material Name : Repair Putty Company : Resin Systems Limited Address : Unit 15, The Grove Trading Estate, Dorchester, Dorset DT1 1 ST Telephone : Fax : Emergency Telephone : 2 Composition Substance %Wt. Cas. Number Eec Number Bisphenol A Epoxy Resin (Xi;R36,R38,R43) Talc Hazard Identification! a) Hazard Symbols: IRRITANT b) Risk & Safety: R36/38 IRRITATING TO EYES AND SKIN MAY CAUSE SENSITIZATION BY SKIN CONTACT If swallowed, seek medical advice and show this sheet After contact with skin, wash immediately with plenty of water Wear suitable gloves Avoid contact with eyes 4 First-aid Measures a) Inhalation: Not applicable b) Eyes: Flush with water for at least 15 minutes hold eyelid away from eyeball If irritation persists then consult a doctor c) Skin: Remove contaminated clothing and launder before re-use Wash with soap/cleanser and rinse with plenty of water If irritation persists, obtain medical attention d) Ingestion: Do not induce vomiting Give plenty of water to drink Seek medical attention immediately

2 Resin Systems Limited Material Safety Data Sheet Printed: 25/10/ :19 Page 2/5 5 Fire-fighting Measures a) Suitable Extinguishers: Dry Powder Blue Foam Cream Carbon Dioxide (Co2) Black Water Fog Red b) Unsuitable Extinguishers: Do not use water jets c) Hazardous Decomposition: Toxic fumes are produced when substance is involved in a fire d) Special Procedures: Wear fire retardant clothing Use approved self-contained breathing apparatus Use water spray to cool containers 6 Accidental Release Measures a) Exposure Controls: Not applicable b) Personal Protection: Wear impervious gloves c) Disposal Considerations: Scoop up and place in plastic container to await transfer Dispose of in accordance with Local Authority Regulations 7 Handling and Storage a) Handling: Avoid skin contact Avoid eye contact Wear suitable protective clothing (See Section 8) b) Storage: Store in original containers Avoid extremes of temperatures

3 Resin Systems Limited Material Safety Data Sheet Printed: 25/10/ :18 Page 3/5 8 Exposure Controls Occupational Exposure Limit: Biological Exposure Limit: Protect Hands: Not assigned Not determined Wear polyethylene gloves Wash after using product 9- Physical & Chemical Properties Appearance Odour PH Boiling Point/Range Melting Point/Range Flash Point Flammability Autoflammability Explosive Properties Oxidising Properties Vapour Pressure Relative Density Solubility Partition Coefficient Misceibility Vapour Density Evaporation Rate Viscosity White coloured putty Non-flammable not applicable not determined 10 Stability and Reactivity Stability: Stable Hazardous Polymerisation: Will not occur Conditions to Avoid: None reasonably foreseeable Materials to Avoid: Oxidising agents Materials to Avoid: Acids Hazardous Decomposition Products: Oxides of Carbon 11 Toxicological Information Routes of Exposure: Ingestion Health Effects: Irritating to eyes Health Effects: Irritating to skin Health Effects: Repeated skin contact may cause dermatitis Acute Effects: Irritation and redness at the site of skin contact Acute Effects: Conjunctivitis Chronic Effects: None know

4 Resin Systems Limited Material Safety Data Sheet Printed: 25/10/ :18 Page 4/5 12 Ecological Information 13 Disposal Considerations 14 Transport Information Mobility: Not determined Not readily biodegradable Bioaccumulative Potential: No specific data available Toxic to fish in low concentrations Do not discharge into drains or watercourses Dispose of by incineration or landfill Dispose of in accordance with Local Authority Regulations UN/SI Number: N/e Packing Grp: n/e Marine Pollutant: NO IMO: N/e Packing Grp: n/e IATA/ICAO: N/e Item: n/e ADR/RID: N/e Transport Name: UK Road NON-HAZARDOUS Hazchem/Kemler Code: n/e N/e none established 15 Regulatory Information a) Hazard Symbols:! IRRITANT b) Risk & Safety: R36/38 IRRITATING TO EYES AND SKIN MAY CAUSE SENSITITZATION BY SKIN CONTACT If swallowed, seek medical advice and show this sheet After contact with skin, wash immediately with plenty of water Wear suitable gloves Avoid contact with eyes c) Other Regulations: Health & Safety At Work Act 1974 Control of Substances Hazardous To Health Regulations 1988 Environmental Protection Act 1990 d) Transport Information: UN/SI Number: N/e Packing Grp: n/e Marine Pollutant: NO IMO: N/e Packing Grp: n/e IATA/ICAO: N/e Item: n/e ADR/RID: N/e Transport Name: UK Road NON-HAZARDOUS Hazchem/Kemler Code: n/e N/e none established

5 Resin Systems Limited Material Safety Data Sheet Printed: 25/10/ :18 Page 5/5 16 Other Information Not Applicable This data sheet is complied to be of assistance but is without guarantee. Users are responsible for safe working.

6 Resin Systems Limited Material Safety Data Sheet Printed: 25/10/ :20 Page 1/5 1 Substance Identification (Synonym:) Material Name : Repair Putty Company : Resin Systems Limited Address : Unit 15, The Grove Trading Estate, Dorchester, Dorset DT1 1 ST Telephone : Fax : Emergency Telephone : 2 Composition Substance %Wt. Cas. Number Eec Number Polyaminoamide (XI/R36,R38,R43) N/e Talc Polyaminoamide contains: Triethylenetertramine (C;R21,R34,R43) < N/e none established 3 Hazard Identification! a) Hazard Symbols: IRRITANT b) Risk & Safety: R36/38 IRRITATING TO EYES AND SKIN MAY CAUSE SENSITIZATION BY SKIN CONTACT If swallowed, seek medical advice and show this sheet After contact with skin, wash immediately with plenty of water Wear suitable gloves Avoid contact with eyes 4 First-aid Measures a) Inhalation: If symptoms persist, obtain medical advice b) Eyes: Flush with water for at least 15 minutes hold eyelid away from eyeball If irritation persists then consult a doctor c) Skin: Wash with soap/cleanser and rinse with plenty of water If irritation persists, obtain medical attention d) Ingestion: Do not induce vomiting Give plenty of water to drink Seek medical attention immediately

7 Resin Systems Limited Material Safety Data Sheet Printed: 25/10/ :21 Page 2/5 5 Fire-fighting Measures a) Suitable Extinguishers: Dry Powder Blue Foam Cream Carbon Dioxide (Co2) Black Water Fog Red b) Unsuitable Extinguishers: Do not use water jets c) Hazardous Decomposition: Toxic fumes are produced when substance is involved in a fire d) Special Procedures: Wear fire retardant clothing Use approved self-contained breathing apparatus Use water spray to cool containers 6 Accidental Release Measures a) Exposure Controls: Isolate the spillage b) Personal Protection: Wear impervious gloves c) Disposal Considerations: Scoop up and place in plastic container to await transfer Do not allow spill to enter drains/sewers/water courses Dispose of in accordance with Local Authority Regulations 7 Handling and Storage a) Handling: Avoid inhalation of vapour Ensure adequate ventilation Avoid skin contact Avoid eye contact Wear suitable protective clothing (See Section 8) b) Storage: Store in original containers Avoid extremes of temperatures

8 Resin Systems Limited Material Safety Data Sheet Printed: 25/10/ :21 Page 3/5 8 Exposure Controls Occupational Exposure Limit: Biological Exposure Limit: Protect Hands: Not assigned Not determined Wear polyethylene gloves Wash after using product 9- Physical & Chemical Properties Appearance Odour PH Boiling Point/Range Melting Point/Range Flash Point Flammability Autoflammability Explosive Properties Oxidising Properties Vapour Pressure Relative Density Solubility Partition Coefficient Misceibility Vapour Density Evaporation Rate Viscosity not applicable not determined 10 Stability and Reactivity Off white coloured putty Amine-like Non-flammable Insoluble in water Stability: Stable Hazardous Polymerisation: Will not occur Conditions to Avoid: Heat Materials to Avoid: Acids Materials to Avoid: Oxidising Agents Hazardous Decomposition Products: Oxides of Carbon Hazardous Decomposition Products: Oxides of Nitrogen Hazardous Decomposition Products: Oxides of Sulphur 11 Toxicological Information Routes of Exposure: Ingestion Health Effects: Irritating to eyes Health Effects: Irritating to skin Health Effects: Repeated skin contact may cause dermatitis Acute Effects: Irritation and redness at the site of skin contact Acute Effects: Conjunctivitis Chronic Effects: None know

9 Resin Systems Limited Material Safety Data Sheet Printed: 25/10/ :21 Page 4/5 12 Ecological Information 13 Disposal Considerations 14 Transport Information Mobility: Not determined Persistence: No specific data available Bioaccumulative Potential: No specific data available Ecotoxicity: No specific data available Do not discharge into drains or watercourses Dispose of by incineration or landfill Dispose of in accordance with Local Authority Regulations UN/SI Number: N/e Packing Grp: n/e Marine Pollutant: NO IMO: N/e Packing Grp: n/e IATA/ICAO: N/e Item: n/e ADR/RID: N/e Transport Name: UK Road NON-HAZARDOUS Hazchem/Kemler Code: n/e N/e none established 15 Regulatory Information a) Hazard Symbols:! IRRITANT b) Risk & Safety: R36/38 IRRITATING TO EYES AND SKIN MAY CAUSE SENSITITZATION BY SKIN CONTACT Keep out of reach of children If swallowed, seek medical advice and show this sheet After contact with skin, wash immediately with plenty of water Wear suitable gloves Avoid contact with eyes c) Other Regulations: Health & Safety At Work Act 1974 Control of Substances Hazardous To Health Regulations 1988 Environmental Protection Act 1990 d) Transport Information: UN/SI Number: N/e Packing Grp: n/e Marine Pollutant: NO IMO: N/e Packing Grp: n/e IATA/ICAO: N/e Item: n/e ADR/RID: N/e Transport Name: UK Road NON-HAZARDOUS Hazchem/Kemler Code: n/e N/e none established

10 Resin Systems Limited Material Safety Data Sheet Printed: 25/10/ :21 Page 5/5 16 Other Information Not Applicable This data sheet is complied to be of assistance but is without guarantee. Users are responsible for safe working.