Dr. D. R. Nandanwar Principal. Date:- 11/04/2018

Transcription

1 GOVRNMNT POLYTCHNIC, PUN (An Autonomous Institute of Govt. of Maharashtra) University Road, Pune INDIA Phone: , Fax: Web Address: Dr. D. R. Nandanwar Principal No.GPP/xam/18/ Date:- 11/04/2018 Important Notice Subject: Provisional Theory Time Table of ven 2017 Term (Summer 2018 xamination) Theory Time Table of ven 2017 Term (summer 2018 xamination) is displayed on notice board & institute s website. Students should check their course code in the time table. Students should check separate time table for online theory examination. In case of any discrepancy / no appearance of theory course in time table / clash of two papers at a time in one slot should immediately communicated to xamination Section up to 13 th Apr till 4.30 pm. No complaints will be entertained later. The capital letter written in front of course name stands for equivalence & the paper printed will be of 180s curriculum. Principal Govt. Polytechnic Pune Notice Board Main, xam, New Building, lectronics Building, Boys Hostel, Girls Hostel

2 Government Polytechnic Pune (An Autonomous Institute of Government of Maharashtra) VN-2017 Theory xamination Provisional Time Table (10 APR. 2018) DAT WK FROM TO COD COURS NAM 24-Apr-18 Tuesday C385 C464 HYDRAULICS HYDRAULICS * 24-Apr-18 Tuesday 387 LCTRICAL MACHINS - I 463 DC MACHIN TRANSFORMR 24-Apr-18 Tuesday T482 AUDIO VIDO NGINRING T 24-Apr-18 Tuesday M382 M461 THRMODYNAMICS AND HAT NGINS THRMODYNAMICS AND HAT NGINS 24-Apr-18 Tuesday MT384 MT463 MTALLURGICAL ANALYSIS MTALLURGICAL ANALYSIS 24-Apr-18 Tuesday CM381 CM461 OPRATING SYSTMS OPRATING SYSTMS 24-Apr-18 Tuesday CM583 WB TCHNOLOGY USING JAVASCRIPT 24-Apr-18 Tuesday IT383 DATA COMMUNICATION AND NTWORKING 25-Apr-18 Wednesday C281 C261 CONSTRUCTION MATRIAL AND PROCSS C CONSTRUCTION MATRIAL AND PROCSS C 25-Apr-18 Wednesday BASIC LCTRICAL NGINRING BASIC LCTRICAL NGINRING 25-Apr-18 Wednesday FUNDAMNTALS OF LCTRICAL NGINRI T,CM,IT LCTRICALTCHNOLOGY T,CM,IT Apr-18 Wednesday Apr-18 Wednesday AM482 AM567 LCTRICAL TCHNOLOGY M, MT LMNTS OF LCTRICAL NGINRING M, MT ANALYSIS AND DSIGN OF RC STRUCTURS ANALYSIS AND DSIGN OF R.C.STRUCTUR 25-Apr-18 Wednesday MA481 CONSTRUCTION MANAGMNT C 484 TSTING AND MAINTNANC OF LCTRICAL QUIP. 25-Apr-18 Wednesday TSTING AND MAINTNANC OF 567 LCTRICAL QUIP. TSTING AND MAINTNANC OF 571 LCTRICAL QUIP. 4/11/ :35 AM 1/13

3 DAT WK FROM TO COD COURS NAM MA Apr-18 Wednesday MA662 NTRPRNURSHIP DVLOPMNT T NTRPRNURSHIP DVLOPMNT T, 25-Apr-18 Wednesday M484 PRODUCTION PLANING AND CONTROL 25-Apr-18 Wednesday M563 PRODUCTION PLANING AND CONTROL 25-Apr-18 Wednesday MT582 MT762 SLCTION OF MATRIALS AND FAILUR A SLCTION OF MATRIALS AND FAILUR A 25-Apr-18 Wednesday CM482 CM761 JAVA PROGRAMMING-II CM &IT ADVANCD JAVA PROGRAMMING 25-Apr-18 Wednesday DD583 RTAIL PROMOTION 25-Apr-18 Wednesday CM281 COMPUTING SSNTIALS 25-Apr-18 Wednesday 25-Apr-18 Wednesday T461 T469 LCTRONIC MATRIALS AND COMPONNTS MICROPROCSSOR AND MICROCONTROLLR F 26-Apr-18 Thursday C384 C463 SURVYING - II SURVYING - II 26-Apr-18 Thursday T386 T464 LINAR INTGRATD CIRCUIT LINAR INTGRATD CIRCUIT M383 FLUID MCHANICS AND FLUID MACHINRY 26-Apr-18 Thursday M462 FLUID MCHANICS AND FLUID MACHINRY M469 FLUID MCHANICS AND FLUID MACHINRY 26-Apr-18 Thursday CM382 MICROPROCSSOR PROGRAMMING 26-Apr-18 Thursday IT384 RLATIONAL DATABAS MANAGMNT SYST 27-Apr-18 Friday HU182 HU162 COMMUNICATION SKILLS C T M MT CM IT DD COMMUNICATION SKILLS C 27-Apr-18 Friday T543 MICROPROCSSOR & INTRFACING 27-Apr-18 Friday CM Apr-18 Friday CM464 C Apr-18 Friday C563 COMPUTR PRIPHRALS AND HARDWAR MA COMPUTR PRIPHRALS & HARDWAR MAIN IRRIGATION NGINRING IRRIGATION NGINRING 4/11/ :35 AM 2/13

4 DAT WK FROM TO COD COURS NAM 27-Apr-18 Friday SWITCHGAR AND PROTCTION SWITCHGAR AND PROTCTION 27-Apr-18 Friday T581 T761 WIRLSS COMMUNICATION T WIRLSS AND MOBIL COMMUNICTION MA486 TOTAL QUALITY MANAGMNT M 27-Apr-18 Friday MA666 TOTAL QUALITY MANAGMNT M 27-Apr-18 Friday MT585 MT765 ADVANCD PHYSICAL MTALLURGY ADVANCD PHYSICAL MTALLURGY 27-Apr-18 Friday CM485 CM764 COMPUTR SCURITY COMPUTR SCURITY 27-Apr-18 Friday DD581 FASHION FORCASTING AM383 2-May-18 Wednesday AM469 2-May-18 Wednesday 2-May-18 Wednesday 2-May-18 Wednesday SOIL MCHANICS SOIL MCHANICS TRANSMISSION AND DISTRIBUTION OF LCTRICAL POWR INDUSTRIAL CONTROLS AND CONTROL PANNL GNRATION AND TRANCMISSION OF LCT. POWR 2-May-18 Wednesday T387 POWR LCTRONICS M385 THORY OF MACHINS AND MCHANISMS 2-May-18 Wednesday M465 THORY OF MACHINS AND MCHANISMS M467 THORY OF MACHINS AND MCHANISMS 2-May-18 Wednesday MT482 MT467 LMNTS OF PHYSICAL MTALLURGY LMNTS OF PHYSICAL MTALLURGY 2-May-18 Wednesday CM386 COMPUTR NTWORKS 2-May-18 Wednesday IT482 CLINT SID SCRIPTING USING JAVASCRI MA488 APPARL MANAGMNT 2-May-18 Wednesday DD550 APPARL MANAGMNT 3-May-18 Thursday SC182 3-May-18 Thursday SC162 APPLID MATHMATICS - II C T M MT CM IT APPLID MATHMATICS - II C T M CM IT 4/11/ :35 AM 3/13

5 DAT WK FROM TO COD COURS NAM 3-May-18 Thursday T544 COMMUNICATION SYSTM 3-May-18 Thursday DD285 DD243 HISTORY OF FASHION-I INDIAN COSTUM 3-May-18 Thursday C485 C565 CONTRACTS AND ACCOUNTS CONTRACTS AND ACCOUNTS 581 INDUSTRIAL AUTOMATION 3-May-18 Thursday 762 INDUSTRIAL AUTOMATION 769 INDUSTRIAL AUTOMATION 3-May-18 Thursday T586 MBDDD SYSTM TCHNOLOGY T 3-May-18 Thursday M584 M773 AUTOMOBIL NGINRING AUTOMOBIL NGINRING 3-May-18 Thursday MT586 MT766 MODRN FOUNDRY NGINRING MODRN FOUNDRY NGINRING 3-May-18 Thursday CM486 CM765 SOFTWAR TSTING CM&IT SOFTWAR TSTING CM&IT 4-May-18 Friday SC281 APPLID MATHMATICS -III C M MT 4-May-18 Friday SC361 APPLID MATHMATICS -III C M MT 4-May-18 Friday SC282 NGINRING MATHMATICS,T,CM,IT 4-May-18 Friday SC362 APPLID MATHMATICS -III,T,CM,IT 4-May-18 Friday DD484 MBROIDRIS OF INDIA 5-May-18 Saturday SC184 NGINRING CHMISTRY C T M 5-May-18 Saturday SC166 NGINRING CHMISTRY 5-May-18 Saturday SC165 APPLID CHMISTRY 5-May-18 Saturday SC169 CHMISTRY 5-May-18 Saturday CM467 DATA COMMUNICATION & NTWORKING 5-May-18 Saturday T741 SWITCHING SYSTM & NTWORK M483 5-May-18 Saturday M562 INDUSTRIAL HYDRAULICS AND PNUMATICS INDUSTRIAL HYDRAULICS AND PNUMATICS 4/11/ :35 AM 4/13

6 DAT WK FROM TO COD COURS NAM 5-May-18 Saturday C582 C762 ADVANCD CONSTRUCTION TCHNIQUS ADVANCD CONSTRUCTION TCHNIQUS 5-May-18 Saturday 583 LCTRICAL MACHIN DSIGN 5-May-18 Saturday T487 T565 COMPUTR NTWORK T COMPUTR NTWORKING 5-May-18 Saturday M581 M763 RFRIGRATION AND AIR CONDITIONING RFRIGRATION AND AIR CONDITIONING MT385 5-May-18 Saturday MT464 5-May-18 Saturday CM581 XTRACTION OF FRROUS MTALS XTRACTION OF FRROUS MTALS TRMINAL QUIPMNT APP DVLOPMNT U AM481 7-May-18 Monday AM566 THORY OF STRUCTURS THORY OF STRUCTURS DIGITAL LCTRONICS AND T390 7-May-18 Monday MICROPROCSS DIGITAL LCTRONICS AND 466 MICROPROCSS MICROCONTROLLR AND APPLICATIONS 7-May-18 Monday T389 T 7-May-18 Monday M486 MTROLOGY AND QUALITY CONTROL 7-May-18 Monday M565 MTROLOGY AND QUALITY CONTROL 7-May-18 Monday MT484 MT563 POWDR MTALLURGY POWDR MTALLURGY 7-May-18 Monday CM388 CM565 OBJCT ORINTD PROGRAMMING :C++ CM & IT OBJCT ORINTD PROGRAMMING :C++ CM & IT 8-May-18 Tuesday AM281 NGINRING MCHANICS C M MT AM261 NGINRING MCHANICS 8-May-18 Tuesday CM567 IT484 SOFTWAR NGINRING SOFTWAR NGINRING 8-May-18 Tuesday T388 T466 DIGITAL LCTRONICS DIGITAL LCTRONICS 8-May-18 Tuesday T744 OPTICAL COMMUNICATION 8-May-18 Tuesday T562 COMMUNICATION SYSTMS-II 4/11/ :35 AM 5/13

7 DAT WK FROM TO COD COURS NAM 8-May-18 Tuesday C583 C763 RAILWAY AND TUNNL NGINRING RAILWAY AND TUNNL NGINRING 8-May-18 Tuesday T584 INDUSTRIAL AUTOMATION T 8-May-18 Tuesday 8-May-18 Tuesday WS581 CNC AND ADVANCD MANUFACTURING WS562 CM585 CM CNC AND UNCONVNTIONAL ADVANCD MANU SCRIPTING TCHNOLOGY USING JSP ADVANCD WB PROGRAMMING USING JSP A.C. MACHINS 8-May-18 Tuesday 562 A.C. MACHINS 569 A.C. MACHINS 8-May-18 Tuesday IT561 NTWORK MANAGMNT SC183 NGINRING PHYSICS 8-May-18 Tuesday SC163 APPLID PHYSICS SC164 NGINRING PHYSICS 9-May-18 Wednesday LCTRICAL STIMATION AND COSTING LCTRICAL WIRING AND STIMATION 9-May-18 Wednesday C461 CIVIL NGG. DRAWING 9-May-18 Wednesday AU361 NVIRONMNTAL SCINC 9-May-18 Wednesday IT382 MULTIMDIA AND ANIMATION 9-May-18 Wednesday IT463 DIGITAL TCHNIQUS AND MICROPROCSSO 9-May-18 Wednesday T765 INDUSTRIAL AUTOMATION 9-May-18 Wednesday LCTRIFICATION OF BUILDINGS C 9-May-18 Wednesday LCTRICAL MACHIN DSIGN 9-May-18 Wednesday T486 INSTRUMNTATION AND CONTROL 9-May-18 Wednesday AM382 AM468 CONCRT TCHNOLOGY CONCRT TCHNOLOGY 9-May-18 9-May-18 Wednesday Wednesday AU483 AU363 CM487 RNWABL & SUSTAINABL NRGY,T,M,MT RNWABL & SUSTAINABL NRGY,T,M,MT RLATIONAL DATABAS MANAGMNT SYST 4/11/ :35 AM 6/13

8 DAT WK FROM TO COD COURS NAM 9-May-18 Wednesday RLATIONAL DATABAS MANAGMNT CM465 SYST 10-May May-18 Thursday Thursday C C462 T T262 SURVYING - I SURVYING - I LMNTS OF LCTRONICS NGINRING M MT LMNTS OF LCTRONICS NGINRING M MT 10-May-18 Thursday T287 BASIC LCTRONICS MT 10-May-18 Thursday T284 FUNDAMNTALS OF LCTRONICS CM&IT 10-May-18 Thursday T485 T563 DIGITAL COMMUNICATION DIGITAL COMMUNICATION 10-May-18 Thursday T484 OPTICAL COMMUNICATION C584 CONSTRUCTION QUIPMNTS AND MACHINR 10-May-18 Thursday C767 CONSTRUCTION QUIPMNTS AND MACHINR C770 CONSTRUCTION QUIPMNTS AND MACHINR 10-May-18 Thursday CM586 NTWORK MANAGMNT AND ADMINISTRATIO CM&IT 10-May-18 Thursday MICROCONTROLLR AND APPLICATIONS MICROCONTROLLR AND APPLICATIONS 10-May-18 Thursday SC283 SC463 ADVANCD PHYSICS ADVANCD PHYSICS 11-May-18 Friday C484 C564 NVIRONMNTAL NGINRING NVIRONMNTAL NGINRING CM282 PROGRAMMING IN C IT,CM 11-May-18 Friday CM263 PROGRAMMING IN C IT,CM T286 PROGRAMMING IN C T 11-May-18 Friday INSTRUMNTATION AND CONTROL INSTRUMNTATION AND CONTROL 11-May-18 Friday WS481 PRODUCTION TCHNOLOGY WS561 PRODUCTION TCHNOLOGY AND CAM 11-May-18 Friday MT386 XTRACTION OF NON FRROUS MTALS 4/11/ :35 AM 7/13

9 DAT WK FROM TO COD COURS NAM 11-May-18 Friday MT465 XTRACTION OF NON FRROUS MTALS 11-May-18 Friday T561 COMMUNICATION SYSTMS -I 14-May-18 Monday M281 NGINRING GRAPHICS C M MT M262 NGINRING GRAPHICS 14-May-18 Monday M583 TOOL NGINRING 14-May-18 Monday T281 BASIC LCTRONICS T 14-May-18 Monday DISTRIBUTION AND UTILIZATION OF LC 14-May-18 Monday T483 MICROWAV COMMUNICATION 14-May-18 Monday AU486 -COMMRC 14-May-18 Monday IT465 MULTIMDIA TCHNIQUS 14-May-18 Monday DD281 DD241 LMNTS OF TXTIL LMNTS OF TXTIL 14-May-18 Monday AU484 AU364 NGINRING CONOMICS MT NGINRING CONOMICS MT T 14-May-18 Monday AU365 INDUSTRIAL PSYCHOLOGY 14-May-18 Monday CM462 C482 MICROPROCSSOR FUND. PRG. &APPLICATIONS CM STIMATION AND COSTING (GS1) 14-May-18 Monday C562 STIMATION AND COSTING (GS1) C566 STIMATION AND COSTING (GS1) 14-May-18 Monday 470 LCTRIC M/CS & CONTROLS M 14-May-18 Monday T261 FUNDAMNTALS OF LCTRONICS NGG. &T 14-May-18 Monday T283 INDUSTRIAL MSURMNTS 14-May-18 Monday T384 T467 LCTRONICS INSTRUMNTATION LCTRONIC MASURING INSTRUMNTS 14-May-18 Monday T764 MBDDD SYSTMS TCHNOLOGY 14-May-18 Monday HU181 NGLISH 14-May-18 Monday IT483 PROGRAMMING USING.NT TCHNOLOGY 14-May-18 Monday IT461 COMPUTR NTWORK 14-May-18 Monday IT281 BASICS OF INFORMATION TCHNOLOGY 4/11/ :35 AM 8/13

10 DAT WK FROM TO COD COURS NAM 14-May-18 Monday HU281 INDUSTRIAL PSYCHOLOGY 15-May-18 Tuesday AU482 AU362 COMMUNITY DVLOPMNT COMMUNITY DVLOPMNT AM384 STRNGTH OF MATRIALS 15-May-18 Tuesday AM462 STRNGTH OF MATRIALS AM470 STRNGTH OF MATRIALS 15-May-18 Tuesday MT483 MT562 FOUNDRY NGINRING FOUNDRY NGINRING 15-May-18 Tuesday CM387 CM566 DATA STRUCTURS CM&IT DATA STRUCTURS CM&IT 15-May-18 Tuesday DD388 DD446 FASHION STUDIS FASHION MRCHANDISING 15-May-18 Tuesday T385 T468 ANALOG COMMUNICATION PRINCIPLS OF COMMUNICATION 15-May-18 Tuesday 487 UTILISATION OF LCTRICAL NRGY 15-May-18 Tuesday T766 AUTOMOTIV MCHATRONICS 15-May-18 Tuesday IT581 DATABAS ADMINISTRATION 16-May-18 Wednesday SC181 SC161 APPLID MATHMATICS - I APPLID MATHMATICS - I 488 NRGY AUDIT AND CONSRVATION 16-May-18 Wednesday NRGY CONSRVATION AND AUDIT 768 MT May-18 Wednesday MT763 NRGY CONSRVATION AND AUDIT WLDING AND MODRN FORMING PROCSSS WLDING AND MODRN FORMING PROCSSS 16-May-18 Wednesday AM581 DSIGN OF STL STRUCTURS 16-May-18 Wednesday LCTRICAL CIRCUITS AND NTWORKS AC AND DC CIRCUITS 16-May-18 Wednesday T382 NTWORK ANALYSIS 4/11/ :35 AM 9/13

11 DAT WK FROM TO COD COURS NAM 16-May-18 Wednesday T462 NTWORK ANALYSIS 16-May-18 Wednesday M384 M464 MCHANICAL MASURMNT MCHANICAL MASURMNT 16-May-18 Wednesday MT383 MT462 MATRIAL TSTING AND QUALITY ASSURAN MATRIAL TSTING AND QUALITY ASSURAN 16-May-18 Wednesday CM385 CM466 DIGITAL TCHNIQUS DIGITAL TCHNIQUS 16-May-18 Wednesday IT385 OPRATING SYSTMS 16-May-18 Wednesday IT762 DATABAS ADIMINISTRATION 16-May-18 Wednesday DD544 DD584 CRATIV FASHION PRSNTATION CRATIV FASHION PRSNTATION 17-May-18 Thursday May-18 Thursday MA482 INDUSTRIAL ORGANISATION AND MANAGMNT,MT MA661 PRINCIPLS OF MANAGMNT IT582 SRVR SID SCRIPTING USING PHP IT761 PROGRAMMING IN PHP 17-May-18 Thursday SC142 APPLID MATHS II 17-May-18 Thursday CM262 PROGRAMMING IN C T 17-May-18 Thursday C382 C467 CIVIL NGINRING DRAWING CIVIL NGINRING DRAWING 17-May-18 Thursday WS381 MANUFACTURING PROCSSS WS461 MANUFACTURING PROCSSS 17-May-18 Thursday MT485 MT564 MTAL WORKING PROCSSS MTAL WORKING PROCSSS 17-May-18 Thursday CM483 SOFTWAR NGINRING 17-May-18 Thursday CM562 LINUX: OPRATING SYSTM 17-May-18 Thursday DD182 GARMNT FINISHING TCHNIQUS 17-May-18 Thursday IT584 GRAPHICS AND GAMING TCHNOLOGY 18-May-18 Friday MA487 MANAGMNT INFORMATION SYSTM CM&IT 18-May-18 Friday MA641 NTRPRNURSHIP DDGM 4/11/ :35 AM 10/13

12 DAT WK FROM TO COD COURS NAM 18-May-18 Friday MA663 PROJCT MANAGMNT C 18-May-18 Friday MA665 SUPRVISORY MANAGMNT MT 18-May-18 Friday M381 M May-18 Friday M May-18 Friday M May-18 Friday M287 MACHIN DRAWING MACHIN DRAWING MACHIN DRAWING &COMPUTR GRAPHICS LMNTS OF MCHANICAL NGINRING MT FUNDAMNTALS OF MCHANICAL NGINRI 18-May-18 Friday M466 BASIC MCHANICAL NGINRING 18-May-18 Friday MA668 MANAGMNT INFORMATION SYSTM CM&IT 18-May-18 Friday C387 CONSTRUCTION TCHNOLOGY 18-May-18 Friday C468 CONSTRUCTION TCHNOLOGY May-18 Friday 464 LCTRICAL MASURMNTS LCRICAL MASURMNT AND INSTRUMNT 18-May-18 Friday T383 APPLID LCTRONICS 18-May-18 Friday T465 POWR LCTRONICS MT May-18 Friday MT468 MCHANICAL NGINRING MATRIALS M NGINRING MATRIALS M 18-May-18 Friday MT281 FURNAC TCHNOLOGY 18-May-18 Friday MT566 FURNAC TCHNOLOGY 18-May-18 Friday MT466 NON CONVNTIONAL MACHINING PROCSSS CM May-18 Friday CM563 JAVA PROGRAMMING-I JAVA PROGRAMMING 18-May-18 Friday IT464 PROGRAMMING IN.NT TCHNOLOGIS 18-May-18 Friday DD485 INTRODUCTION TO FASHION MARKTING AN 18-May-18 Friday DD286 TXTILS OF INDIA () 19-May-18 Saturday CM484 CM564 ADVANCD COMPUTR NTWORK ADVANCD COMPUTR NTWORK 19-May-18 Saturday CM468 WB DSIGNING 19-May-18 Saturday DD184 QUIPMNT AND MACHINRY OF APPARL C 4/11/ :35 AM 11/13

13 DAT WK FROM TO COD COURS NAM 482 POWR LCTRONICS AND DRIVS 19-May-18 Saturday INDUSTRIAL LCTRONICS T449 AM May-18 Saturday AM467 LMNTS OF INDUSTRIAL LCTRONICS MCHANICS OF MATRIAL AND STRUCTURS MCHANICS OF MATRIALS AND STRUCTUR 19-May-18 Saturday T463 APPLID LCTRONICS 19-May-18 Saturday T566 M485 INSTRUMNTATION AND CONTROL SYSTMS DSIGN OF MACHIN LMNTS 19-May-18 Saturday M564 MACHIN DSIGN AND CADD M566 MACHIN DSIGN AND CADD 19-May-18 Saturday MT382 BASIC MTALLURGY 19-May-18 Saturday C386 C465 HIGHWAY AND BRIDG NGINRING HIGHWAY AND BRIDG NGINRING M May-18 Saturday M561 MT May-18 Saturday MT May-18 Saturday 19-May-18 Saturday CM383 CM463 IT381 POWR NGINRING POWR NGINRING HAT TRATMNT OF MTALS AND ALLOYS HAT TRATMNT OF MTALS AND ALLOYS COMPUTR GRAPHICS USING C CM&IT COMPUTR GRAPHICS CM&IT DIGITAL TCHNIQUS AND MICROPROCSSO 19-May-18 Saturday IT462 WB DSIGNING USING HTML/DHTML 19-May-18 Saturday 384 LCTRICAL POWR GNRATION 19-May-18 Saturday 563 T May-18 Saturday T564 INDUSTRIAL CONTROLS AND CONTROL PANL PRIFRRAL INTRFAC CONTROLLR MICROCONTROLLR BASD SYSTMS 19-May-18 Saturday MA648 MARKTING MANAGMNT Note :- (*- MANS SUBJCT AR QUIVALNT FOR THORY XAM.) 1. Candidates should provide themselves if necessary with scale, mathematical instruments, mini drafte 2. very student must bring hall ticket, Identity card, exam fees receipt & must be in uniform. 3. Use of reference books etc. is strictly prohibited except where otherwise stated. 4/11/ :35 AM 12/13

14 DAT WK FROM TO COD COURS NAM 4. Use of pocket calculator permitted however, programmable calculators are not allowed. 5. Candidates shall be allowed to enter examination hall upto half an hour after the start of examination, but not later than that. 6. If before, during or after examination it is found that candidate has been found to have copied or atte to copy, action will be taken against the candidate according to rules. 7. The candidate should bring Identity card, Hall Ticket, Fee-receipt along with them at the time of exam for duplicate hall ticket Student need to pay fine Rs.100/- 8. Use of pagers & Cellular phones etc. is strictly prohibited. 9. Figures to the right shows approximate no. of students eligible for exam. Principal Government Polytechnic Pune 4/11/ :35 AM 13/13