Series W9F FLANGED FLUSH FACE DIAPHRAGM SEALS

Transcription

1 Series W9F FLNGE FLUSH FE IPHRGM SELS REOTEMP s Flanged Flush-Face iaphragm Seals are useful in applications where a continuous flow of process across the diaphragm is required to prevent solids buildup and a one-piece, all-welded construction is desired. FETURES / ENEFITS One-piece Seal esign olts irectly to Process Flange enter Instrument Exit IPHRGM SELS W9FF Wetted Flange W9FR Integral Face Non-wetted Flange ommonly Supplied with Flush/alibration Ring Ideal for Gauge or ifferential Pressure Transmitters Threaded Instrument onnection SPEIFITIONS. Wetted Materials Process Temperature Limits mbient Temperature Limits Minimum Recommended Span iaphragm Size.8".".5".".5 &.5 Gauges 0 psi 5 psi 0 psi 0" H O,.5, & 6 Gauges N/ 60 psi 0 psi 0" H O Transmitter (Gauge Pressure) 0 psi 00 H O 0 H O 5" H O Transmitter (ifferential Pressure) N/ 50 H Od 0 H Od 5" H Od ifferential Pressure Gauge N/ N/ N/ 00" H Od vailable iaphragm Sizes Flange: 6SS, 0SS, Monel, lloy 0, or Hast -76. iaphragm: 6SS, Hast -76, Tantalum, Monel, or others -0 to 750 F etermined by the pressure instrument. iaphragm Size.8".".5"." -/" Flange ST N/ N/ N/ " Flange -5 ST N/ N/ " Flange -5-6 ST N/ " Flange -5-6 ST -9 Optional iaphragm sizes are only available in W9FF, standard diaphragm sizes are the same for W9FF and W9FR. Weights and imensions: ½ Flange Rating Low Volume/apillary onnection Maximum Working Pressures at 00ºF: etermined by NSI 6.5 flange ratings. # of olts Weight (Lbs.) # ½ # NOTE: Weights and dimensions are for raised face flanges only. Other flange sizes and sealing face info can be found in NSI 6.5 standards. 7 (800) sales@reotemp.com reotemp.com PT-087

2 Series W9F FLNGE FLUSH FE IPHRGM SELS HOW TO ORER: hoose options to build a part number. For example: W9FFWRS-W0-S-TS // XFRS W9FF W R S SEL TYPE Selections for W9FF > W9FF = Flanged Flush Face (Wetted Flange) INSTRUMENT ONNETION = / Female = / Female W = Low-Volume onnection for Smart Transmitters SELING FE R = Raised-Face J = Ring-Type Joint F = Flat Face PIPE SIZE H = -½ NSI = NSI = NSI = NSI 6 = 6 NSI PRESSURE RTING = 50# = 00# 6 = 600# 9 = 900/500# 7 = 900# 8 = 500# For " pipe size or larger. IPHRGM/ FLNGE MTERIL S = 6L/6L M = Monel/Monel* F = 0/0L* H = Hast -76/Hast -76* *Non-standard configuration. INSTRUMENTS iaphragm Foil W9FF -Piece Flange & iaphragm are Same Material IPHRGM SELS Selections for W9FR > W9FR = Flanged Flush Face, Integral Face (Non- Wetted Flange) = / Female = / Female W = Low-Volume onnection for Smart Transmitters R = Raised-Face J = Ring-Type Joint H = -½ NSI = NSI = NSI = NSI = 50# = 00# 6 = 600# 9 = 900/500# 7 = 900# 8 = 500# For " pipe size or larger. Wetted Insert & iaphragm H = Hast -76 U = Tantalum = uplex 05 J = Titanium I = Inconel Z = Zirconium M = Monel 00 Note: Non-wetted 6SS flange. W9FR -Piece 6 Flange & Wetted Insert, Material as Selected Wetted iaphragm Surface Wetted Surface -W0 -S -TS // XFRS INSTRUMENT MOUNT SYSTEM FILL FLUI OPTIONS FLUSH/LIRTION RINGS (OPTIONL) Selections for oth W9FF & W9FR > -T = irect Mount, Threaded -W = irect Mount, Welded -RTR = 6 ooling Tower -STW = ooling Tower -?? = rmored apillary, Threaded -?? = rmored apillary, Welded -P?? = PV oated rmor, Threaded -W?? = PV oated rmor, Welded Note:?? = Length in Feet (e.g. 05 = 5 feet) See 57 for omplete Mounting Guide -YYY = ry Seal, No Instrument ommon Fills -S = 00 -G = Glycerin USP -H = 70 - = Fomblin Y06 - = Halocarbon 6. See 58 for omplete Fill Guide -XX = No Fill Fluid -OX = leaned for Oxygen Service -U = Gold-Plated iaphragm (0 Microns) -N = NE ertification MRO-75 -T = Teflon-oated iaphragm -TS = SS Tag (9 haracter Max.) -9 =." iaphragm (W9FF " Only) -6 =." iaphragm (Optional on W9FF " and ") XFRS = Pipe, Single / Port, 6SS XFRS = Pipe, ual / Port, 6SS XFRS = Pipe, Single / Port, 6SS XFRS = Pipe, ual / Port, 6SS XFRS = Pipe, Single / Port, 6SS XFRS = Pipe, ual / Port, 6SS XFRS = Pipe, Single / Port, 6SS XFRS = Pipe, ual / Port, 6SS See Page 8 for omplete Offering Wetted See Page 55 for Smart Transmitter ttachment odes PT-087 (800) sales@reotemp.com reotemp.com 7

3 INSTRUMENTS iaphragm Seals SMRT TRNSMITTER TTHMENT HOW TO ORER: Unbalanced System Example W9FFWRS-W-S-R W9FFWRS-0S-S-RL IPHRGM SELS alanced System complete assembly with one part number that includes two diaphragm seals, two capillaries, two fills, and one complete assembly calibration certificate. -RR Identical system on HP and LP s, capillary exit through process connections. apillary mounts only. IFFERENTIL PRESSURE SSEMLY Unbalanced P System Where seal, mount, capillary, or fill is not identical. complete assembly includes one diaphragm seal on the HP side N one diaphragm seal on the LP side. -RH Mount via Process onnections -RL Mount via Process onnections High Pressure Low Pressure -R Identical system on HP and LP sides, capillary exit through face of cover flange. apillary mounts only. Example: W9FFWRS-0-S-R -R Mount via Face of over Flange High Pressure -R Mount via Face of over Flange Low Pressure GUGE PRESSURE SSEMLY In Line Pressure Transmitter Traditional Mount for Gauge Pressure Seal mount on one side only, other side is vented. -R Mount to In-Line Gauge Pressure Transmitter. irect or remote mount. -R Instrument mount through process connections, HP. Use R if mounting to LP side -R Horizontal Mount (Tank Mount) to In-Line Gauge Pressure Transmitter. irect mount only. -R8 Instrument mount through face of cover flange, HP. Use R9 if mounting to LP 55 (800) sales@reotemp.com reotemp.com PT-087

4 iaphragm Seals IPHRGM SEL SSEMLY TO SMRT TRNSMITTERS REOTEMP specializes in the unique craft of assembling diaphragm seals to field transmitters for the purpose of measuring pressure, differential pressure, level, and flow. s a trusted supplier to many of the world's leading transmitter manufacturers, REOTEMP can assemble a diaphragm seal system to virtually any make or model transmitter. Every transmitter mount includes the features below to ensure superior performance and durability for every assembly. REOTEMP also offers repair, refurbishment or replacement of used transmitters with remote seals. STNR FETURES ON LL REOTEMP SSEMLIES Tamper-Proof Inspector Seal on ll Threaded Joints 5pt. NIST-traceable ertificate of alibration of Final ssembly Vacuum Evacuated Fluid and Instrument hamber to x0-8 mbar bsolute IPHRGM SELS ll-welded apillary and Stand-off onnections Static Vacuum and Pressure Test (P ssemblies Only), Verifying Filled System Integrity onfiguration of Transmitter to ustomer Specified Span Helium Leak hecked iaphragm and Post-fill ssembly Leak Test 00% Pure Fill Fluid with Minimum Hour e-gassing ll-welded irect Mount Standoffs (mm I apillary Inside for Fill Fluid Minimization) Low Volume Modification to Factory over Flanges PT-087 (800) sales@reotemp.com reotemp.com PT

5 iaphragm Seals INSTRUMENT MOUNTING ONFIGURTIONS IRET MOUNT REMOTE MOUNT IPHRGM SELS irect Mounting a pressure gauge, switch, or transmitter is the most common diaphragm seal assembly. Threaded Welded llows Replaceability High Quality Thread Sealant Inspector Seal Tamper Proof Rated for High Temps Leak Resistant ode escription Max. Temp -T Threaded Instrument onnection 00 F -W Welded Instrument onnection 600 F ssembly Notes: Welded connection recommended for pressure exceeding,500 psi for purposes of leak prevention. Remote Mounting a pressure instrument using flexible capillary is a common mounting method when the point of measurement is in a hazardous or inconvenient location.??" PV oated SS Flex rmor SS Flex rmor ode escription Max. Temp -P?? PV oated SS rmor, Threaded to Seal 00 F -W?? PV oated SS rmor, Welded to Seal 600 F -?? SS Flexible rmor, Threaded to Seal 00 F -?? SS Flexible rmor, Welded to Seal 750 F Note:?? = Length in feet (e.g. 05 = 5 feet) ssembly Notes: apillary has a mm inner diameter unless specified differently by customer. mbient temp limit of PV coated armor is 50ºF. Standard instrument connection is threaded (Smart Transmitters are welded), unless specified by customer. OOLING ELEMENTS Used in either high temp or cold temp applications, ooling Elements mounted above diaphragm seals quickly normalize fluid temperature toward ambient. This protects the pressure instrument while still maintaining the convenience of a direct mount. TREE SSEMLIES Tree ssemblies offer the ability to mount two pressure instruments onto one diaphragm seal, allowing the user to gain both a local indication and a remote signal without adding an additional pipe insertion. 6" " -RTR -STW ode escription Max. Temp -RTR 6 ooling Tower 750 F -STW ooling Standoff 600 F ssembly Notes: ooling elements are welded to diaphragm seal. Instruments are threaded to cooling element unless specified. ll lengths are nominal. -TRE & -TRX -TRM ode escription Max. Temp -TRE Goal Post, Low Pressure ssembly (Max. 50 psi) 00 F -TRX Goal Post, Heavy uty (Max.,000 psi) 600 F -TRM ompact Tree ssembly (Max.,000 psi) 600 F ssembly Notes: Threaded joints are fully welded for consistent instrument orientation. Instrument connections are threaded unless specified by customer. iaphragm seal must displace enough fluid to drive both instruments. 57 (800) sales@reotemp.com reotemp.com PT-087

6 iaphragm Seals FILL GUIE iaphragm seals are designed to protect pressure instruments from hot process media and corrosive chemicals while minimizing any negative effect on instrument accuracy and durability. well-made diaphragm seal can achieve this goal only if it is properly assembled, filled, and tested. REOTEMP s highly trained technicians use state-of-the-art equipment so that every diaphragm seal assembly is filled and tested to assure optimal instrument performance: -hour Minimum Fluid e-gassing Evacuated Instrument hamber Up to 0-8 mbar bsolute omplete Fill Integrity heck Fill-port Leak Test Post-fill Static Test Part Number ode S H 8 5 G N S P K E Name escription STNR FILL FLUI This is the standard fill fluid for most diaphragm seal applications. HIGH TEMP SILIONE Standard for Smart Transmitters and capillary systems. Performs well in applications with high temperature and a deep vacuum. Highest temperature rating; ideal for gauge seal assemblies. Too thick for capillary assemblies. Response time can become very slow in cold conditions. Low viscosity allows it to perform well in both low and high temperatures. Syltherm Not recommended for vacuum service or at high temperatures when 800 under low static pressure Glycerin USP NEOEE M0 7 Food Grade Propylene Glycol Fomblin Y06 Performs very well in high temperatures when under vacuum. The high viscosity and freezing point of this fluid makes it a poor choice for cold or outdoor installations without heat tracing. Similar high temperature performance as 705, however it performs better at lower temperatures. FOO GRE This is the standard fill fluid for most gauge seal assemblies for food, beverage, and pharmaceutical applications. Its high viscosity will cause very slow response at times in low temperature and outdoor installations. Low viscosity and a wide temperature range makes this the standard sanitary fill fluid for Smart Transmitters and capillary systems. Highest temperature limit for food grade fluids. ecause of its high viscosity it does not perform well in low temperatures. This is the fill fluid used when Glycol is called for on the customer specification. It has a very narrow temperature range. Temperature Range (Vacuum Service <5psia) -0ºF to 00ºF (-0ºF to 50ºF) 0ºF to 650ºF (0ºF to 50ºF) 50ºF to 750ºF (50ºF to 00ºF) -0ºF to 750ºF (-0ºF to 50ºF) 50ºF to 675ºF (50ºF to 550ºF) -0ºF to 575ºF (-0ºF to 00ºF) 60ºF to 50ºF (Not Suitable) -0ºF to 00ºF (-0ºF to 00ºF) 0ºF to 550ºF (0ºF to 50ºF) 0ºF to 00ºF (Not Suitable) Viscosity ~77ºF Note: PulsePlus fill fluids may have different physical properties than specified. hemical composition and temperature ranges do not vary. INSTRUMENTS Specific ~77ºF Thermal Expansion cc/cc/º Yes No Yes No Yes No Yes No Yes No INERT (TYPILLY FOR HLORINE N OXYGEN PPLITIONS OR IN SILIONE-FREE ENVIRONMENTS) Ideal inert fluid for transmitter applications. Relatively high vapor pressure above 00ºF. Not recommended for use in high temperature situations with low static pressure. Halocarbon 6. Standard inert fluid used in gauge seal assemblies. Halocarbon Typically used in low temperature applications because of its low.8 viscosity. Fluorolube FS-5 5 Similar performance to Halocarbon 6., however not suitable for vacuum service. Krytox Specialty fill fluid, inert. Ethylene Glycol Trademark ow orning Trademark The ow hemical ompany Occasionally used in annular (O-ring) seal assemblies. Verification of Instrument alibration High-temp Pipe Sealant Used on ll Threaded Joints (Welded Joints Upon Request) Tamper-proof (Inspection Seal) Lacquer used on ll Threaded Joints Sturdy iaphragm Packaging Protection Trademark Halocarbon Product orporation Trademark USIMONT S.P. SPEILTY -0ºF to 50ºF (0ºF to 50ºF) -0ºF to 00ºF (-0ºF to 00ºF) -0ºF to 0ºF (-00ºF to 00ºF) -0ºF to 50ºF (Not Suitable) -0ºF to 50ºF (-0ºF to 00ºF) -5ºF to 0ºF (Not Suitable) 5 Trademark Hooker hemical ompany 6 Trademark The hemours ompany F, LL No Yes No No No No Trademark Stepan Specialty Products IPHRGM SELS PT-087 (800) sales@reotemp.com reotemp.com 58

7 iaphragm Seals IPHRGM SEL ESSORIES IPHRGM SELS RY PILLRY HOW TO ORER: hoose options to build HOW a part number. TO ORER For example: XMM0-TS X M M 0 Used When Pressure Instrument Needs to be Removed from irect ontact of Installation Point ll-welded 6SS onstruction vailable up to 00 ft. in Length (Max 0 ft. in diaphragm seal assembly) Max Working Pressure of 0,000 psig mm I Standard Note: if capillary is part of a filled diaphragm seal system use digit mounting code per p57 (Example: "5" = 5' of armored capillary, threaded to seal) -TS MOEL INSTRUMENT ONNETION PROESS ONNETION LENGTH IN FEET PROTETION OPTIONS X = apillary M = /" Male F = /" Female M = /" Male F = /" Female M = /" Male F = /" Female M = /" Male F = /" Female 05 = 5 ft. 0 = 0 ft. 0 = 0 ft.?? = Specify, Length in feet = Stainless Steel rmor P = PV oated Stainless Steel rmor = are apillary Tubing (Rare) -M = mm I (0 ft. Max) -TS = Stainless Steel Tag (-0 haracters) FLUSH RINGS Used to Flush Process Fluid or Provide ccess for Field alibrations Machined from Solid ar Stock Pressure Ratings Up to NSI lass 500 For Use with W9FF and W9FR iaphragm Seals (Raised Face) HOW TO ORER: hoose options to build HOW a part number. TO ORER For example: XFRS-PM XFR S -PM MOEL PIPE SIZE PORT SIZE NUMER OF PORTS MTERIL OPTIONS XFR = Flush Ring H = -/" NSI = " NSI = " NSI = " NSI = /" = /" = One Port = Two Ports (80 Opposed) = Four Ports (90 part) S = 6SS H = Hast-76 M = Monel J = Titanium = uplex 05 = lloy 0 -MR = Mill ertification -PM = Positive Material Identification ertification -GS = /" SS Plug -G = /" SS Plug 8 (800) sales@reotemp.com reotemp.com PT-087

8 iaphragm Seals IPHRGM SEL OPTIONS Visit reotemp.com ü heck Stock ü onfigure Part # ü Get Price ü ownload PF ata Sheets IPHRGM SELS MS MS6 MS8 W5 W6 W7 T5 T6 V5 W9FF W9FR W9XT W9FP ST75 ST5 N LRGER STF05 PULSTION PROTETION (ONLY VILLE WITH REOTEMP PRESSURE GUGE MOUNTE TO SEL) STF75 N LRGER -PP Pulse Plus ü ü ü ü ü N/ N/ ü N/ ü ü N/ IPHRGM OTING -U Gold Plated iaphragm N/ ü N/ ü ü ü ü ü ü ü N/ N/ -T Teflon oated iaphragm PTFE N/ ü N/ ü ü ü N/ ü N/ ü N/ N/ -EP Electropolished iaphragm N/ N/ N/ N/ N/ N/ ü ü ü ü N/ N/ -FW Fill Port Welded losed ST ü ü ü ü ü ü ü ü ü N/ N/ -VF Fill for Vacuum Service N/ ü N/ ü ü ü N/ ü N/ ü N/ N/ FILL LENING N FINISH OR XFR -G egreased, Shipped in Sealed ag ü ü ü ü ü ü ü ü ü ü N/ ü -OX -OY leaned for Oxygen Service per SME 0. leaned for Oxygen Service per MIL-ST-0 ü ü N/ ü ü ü ü ü ü ü N/ ü ü ü N/ ü ü ü ü ü ü ü N/ ü PLUG FOR FLUSH PORT -GS / SS Plug Installed ST ST ST N/ N/ N/ N/ N/ N/ N/ N/ ü -JS / SS Plug Installed N/ ST ST N/ N/ N/ N/ N/ N/ N/ N/ ü -GH / Hast Plug Installed ü ü ü N/ N/ N/ N/ N/ N/ N/ N/ ü -JH / Hast Plug Installed N/ ü ü N/ N/ N/ N/ N/ N/ N/ N/ ü -GM / Monel Plug Installed N/ ü ü N/ N/ N/ N/ N/ N/ N/ N/ ü -JM / Monel Plug Installed N/ ü ü N/ N/ N/ N/ N/ N/ N/ N/ ü TG OPTION -TS Stainless Steel Tag (-0 haracters) ü -TM Stainless Steel Tag (-80 haracters) ü -TP Paper Tag ü ERTIFITION OPTIONS -N ertificate of NE ompliance ü ü N/ ü ü ü N/ N/ ü ü N/ ü -M General Material onformance ü ü ü ü ü ü ü ü ü ü ü ü -MR MTR - Mill Test Report ertificate ü ü ü ü ü ü ü ü ü ü N/ ü -PM PMI - Positive Material Identification ertificate ü ü ü ü ü ü ü ü ü ü N/ ü -HT Hydrostatic Test per SME. ü ü ü ü ü ü ü ü ü ü N/ N/ -HL Helium Leak Test ertificate ü ü N/ ü ü ü ü ü ü ü N/ N/ ü N/ Indicates that the option is available Indicates the option is not available Standard on MS8, available on MS & MS6. 8 (800) sales@reotemp.com reotemp.com PT-087