AQ Matic Valve and Controls Company, Inc.

Size: px
Start display at page:

Download "AQ Matic Valve and Controls Company, Inc."

Transcription

1 J Q Matic Valve and ontrols ompany, Inc.

2 J Q Matic Valve and ontrols ompany, Inc.

3 Q Matic Valve and ontrols ompany, Inc.

4 Q Matic Valve and ontrols ompany, Inc.

5 REVISIONS ZONE EN REV. TE PP' 009 H RERWN IN SOLIWORKS, -WS R NE /"-8 NPT PORT "" /"-8 NPT PORT "" ITEM NO. efault/qty. PRT NUMER R0777 OY, " NPT R07 SET,, RSS R68 NUT,HEX, /6"-,SS R07 PLTE,IS,V,RSS,MH R0779 O-RING, -0, FKM 6 R070 IS,, HYR R07 IS,, TEFLON 7 R070 IS HOLER, V 8 R07786 O-RING, -0, FKM 9 R0779 O-RING, -08, FKM 0 R GUIE, SHFT,, RSS R078 P,,NPT TP TOP,I 6 R0700 SREW, /6-8X /8", HX H, R0796 IPHRGM, SERIES R0797 IPHRGM, OULE OTE 6 R0767 HEX NUT, /6"-8,ZIN PLTE R0766 O-RING, FLS, R07 SHFT,,NO 7 R078 SPER, RSS 8 R079 PLTE, LOWER IPHRGM 9 R079 PLTE, UPPER IPHRGM IPHRGM & SELS KIT ONSIST OF ITEM NO'S (),,6,8(),9,,6() INT. PRTS KIT (NORM. OPEN) ONSIST OF STNR ITEM NO'S,7,0,7,8,9,0 REPIR PRTS KITS (V-R) 0700 (V-RHT) INLUES IS 070 (-JH) IPHRGM 0796 (-F) 0700 (V-RF) INLUES IS 07 (-JT) IPHRGM 0797 (-FV) 6 SET (ITEM NO. ) 07 (-MO) 7 PPLY LOTITE 6 HERE SSEMLY TOOLS FOR INSTLLTION & REMOVL OF SET (ITEM #) (TOOL NOT SHOWN) 07 (6-MT) 8 FOR INSTLLTION & REMOVL OF SHFT GUIE (ITEM #0) (TOOL NOT SHOWN) 0799 (-GT) 6 PPLY LOTITE 6 HERE O NOT PPLY TO 0-RING SELS NOTE:. MERIN NTIONL STNR TPER PIPE THRES (NPT) PER NSI VLVES VILLE WITH.S.P.T. EN ONNETIONS Q Matic Valve and ontrols ompany, Inc. ll rights reserved. THIR NGLE PROJETION Q Matic Valve and ontrols ompany, Inc. R (VVF ) (" NPT) NORMLLY OPEN (STNR) //0 :: PM - - **** WHEN INIVIULLY IS TRIUTE, VERIFY OUMENT REVISION PRIOR TO USE. **** O NOT SLE RWING. IMS. RE IN INHES [mm] INTERPRET IMS N TOLERNES PER SME Y.M -009 UNLESS OTHERWISE SPEIFIE: TOLERNES: NGLES : PLE.X: PLE.XX: PLE.XXX: PPROVLS RWN NE PPROVE HEKE TE 08-- TITLE SIZE SLE : TLOG SHEET, V WG NO. R07767 SHEET OF REV J.

6 REVISIONS ZONE EN REV. TE PP' 0 (/" NPT) NORMLLY LOSE MOEL ITEM NO. efault (normally closed)/qty. PRT NUMER 0 R0798 MLE PIPE PLUGS, R077 VLVE SHFT, STNR, N (/" NPT) 0786 (VVF ) (" NPT) NORMLLY LOSE (/8" NPT) (USE WITH NORMLLY LOSE VLVES ONLY) 7 6 SPRING SSIST LOSE MOEL ITEM NO. efault ( spring assist closed)/qty. PRT NUMER R078 SPRING SSIST OPEN MOEL P,,SPRING SSIST LOSE, I R07677 O-RING,-0,NITRILE R0790 MLE PIPE PLUGS, R079 OMPRESSION SPRING, SERIES 6 R0708 WSHER, 7 R07 SPRING RETINER NUT, & 6 ITEM NO. efault (spring assist open)/qty. PRT NUMER 8 R07869 SPRING, OMPRESSION 9 R076 WSHER, ENTERING,RSS (/" NPT) 078 (VVF ) (" NPT) SPRING SSIST LOSE (/" NPT) 9 8 ONVERSION KITS ONVERSION KIT (SPRING SSIST LOSE) ONSISTS OF STNR ITEM NO'S THRU 7 ONVERSION KIT (SPRING SSIST OPEN) ONSISTS OF STNR ITEM NO'S 8, (V-S) (V-SO) (/" NPT) R888 REPIR PRTS KITS INT. PRTS KIT (NORM. LOSE) ONSISTS OF STNR ITEM NO'S, 7, 0, 8, 9, 0, INT. PRTS KIT (SPRING SSIST LOSE) ONSISTS OF STNR ITEM NO'S,, 6 INT. PRTS KIT (SPRING SSIST OPEN) ONSISTS OF STNR ITEM NO'S 8, (V-RG) (V-S) (V-SO) //0 :: PM - - **** WHEN INIVIULLY ISTRIUTE, VERIFY OUMENT REVISION PRIOR TO USE. **** 078 (VVF ) (" NPT) SPRING SSIST OPEN 06 Q Matic Valve and ontrols ompany, Inc. ll rights reserved. O NOT SLE RWING. IMS. RE IN INHES [mm] INTERPRET IMS N TOLERNES PER SME Y.M -009 UNLESS OTHERWISE SPEIFIE: TOLERNES: NGLES : PLE.X: PLE.XX: PLE.XXX: THIR NGLE PROJETION PPROVLS RWN PPROVE HEKE NE TE 08-- TITLE SIZE SLE Q Matic Valve and ontrols ompany, Inc. : TLOG SHEET, V WG NO. R07767 SHEET OF REV J.

7 REVISIONS ZONE EN REV. TE PP' 007 K RERWN IN SOLI WORKS -WS NE 070 L -WS: 0777, NOW: 8PR TJM R /"-8 NPT PORT "" [MILLIMETERS] INHES 0789 (VVG ) ("NPT) 079 (VVH ) (-/"NPT) NORMLLY OPEN (STNR) /"-8 NPT PORT "" /8/0 0:6: M - - **** WHEN INIVIULLY ISTRIUTE, VERIFY OUMENT REVISION PRIOR TO USE. **** NOTE:. MERIN NTIONL STNR TPER PIPE THRES (NPT) PER NSI VLVES VILLE WITH.S.P.T. EN ONNETIONS. PPLY LOTITE 6 HERE PPLY LOTITE 6 HERE O NOT PPLY TO O-RING SELS 06 Q Matic Valve and ontrols ompany, Inc. ll rights reserved. O NOT SLE RWING. IMS. RE IN INHES [mm] INTERPRET IMS N TOLERNES PER SME Y.M -009 UNLESS OTHERWISE SPEIFIE: LL FINISHE MHINE SURFES OR ETTER. TOLERNES: NGLES : PLE.X:.0 [0.8] PLE.XX:.0 [0.] PLE.XXX:.00 [0.] ITEM NO. IPHRGM & SEL KIT ONSISTS OF ITEM NO'S (),, 6, 8(), 9,, & () INT. PRTS KIT (NORM. OPEN) ONSIST OF STNR ITEM NO'S, 7, 0, 6, 7, 8. 9 *REQUIRES SSEMLY TOOL **FOR USE WITH HYR IS ONLY SSEMLY TOOLS OY, 6 (ST IRON) FOR INSTLLTION & REMOVL OF SET (ITEM #) (TOOL NOT SHOWN) FOR INSTLLTION & REMOVL OF SHFT GUIE (ITEM #0) (TOOL NOT SHOWN) REPIR PRTS KITS PRT NUMER " NPT 07 /" NPT 089 SET, 6, RSS* 0709 NUT,HEX, /6"-,SS 68 IS PLTE, RSS 0796 O-RING, - FKM IS, 6 07 (6-MT) -/6" HEX SOKET (V6-R) 0700 (V6-RHT) INLUES INLUES IS P/N 079 (HYR) IS P/N 079 (TEFLON) N IPHRGM P/N N IPHRGM P/N 077 (UN N) 0776 (FKM) 0700 (V6-RF) SET (ITEM NO. ) 0707 QTY. HYR 079 FKM HOLER,IS, V6, RSS O-RING, -0 FKM O-RING, - FKM GUIE, 6 SHFT* P, 6, NPT, (ST IRON) 0860 SREW,HEX H P,/6-8X-/ IPHRGM, 6 UN 077 FKM 0776 HEX NUT, /6"-8, PLTE O-RING, - LFS SHFT,6,NO SPER, RSS PLTE, IPHRGM, UPPER,SS PLTE, IPHRGM, LOWER,SS LOKWSHER** 079 THIR NGLE PROJETION PPROVLS RWN PPROVE HEKE TE SEE REVERSE SIE FOR ONFIGURTION OPTIONS OMPONENTS / SSEMLIES TO E OMPLINT N OMPTILE WITH EUROPEN UNION IRETIVE 00/9/EE (RoHS) REQUIREMENTS TITLE TLOG SHEET, V6 IPHRGM VLVE STNR MOEL SIZE SLE Q Matic Valve and ontrols ompany, Inc. : WG NO. R07768 SHEET OF REV L

8 REVISIONS ZONE EN REV. TE PP' SEE SHEET ONE FOR LIST OF HNGES. (/" NPT) (/" NPT) 7 6 (/8" NPT) (USE WITH NORMLLY LOSE VLVES ONLY) NORMLLY LOSE MOEL ITEM NO. QTY. PRT NUMER 070 SHFT,6,N 0798 PLUG,PIPE,/" MNPT SPRING SSIST LOSE MOEL ITEM NO. QTY. PRT NUMER 07 SPRING RETINER NUT, & OMPRESSION SPRING 0607 (VVG ) (" NPT) (VVH ) (-/" NPT) NORMLLY LOSE O-RING,-0, UN PLUG,PIPE,/8" MNPT 7 07 P - S (ST IRON) SPRING SSIST OPEN MOEL ITEM NO. QTY. PRT NUMER WSHER, ENTERING,RSS SPRING, OMPRESSION (/" NPT) 8 (/" NPT) 0770 (VVG ) (" NPT) 0798 (VVH ) (-/" NPT) SPRING SSIST LOSE (/" NPT) 9 REPIR PRTS KITS INT. PRTS KIT (NORM. LOSE) ONSISTS OF STNR ITEM NO'S, 7, 0, 7, 8, 9, 070 (V6-RG) R888 INT. PRTS KIT(SPRING SSIST LOSE) ONSISTS OF STNR ITEM NO'S & INT. PRTS KIT(SPRING SSIST OPEN) ONSISTS OF STNR ITEM NO'S 8 & 9 ONVERSION KITS ONVERSION KIT(SPRING SSIST LOSE) ONSISTS OF STNR ITEM NO'S THRU 7 ONVERSION KIT (SPRING SSIST OPEN) ONSISTS OF STNR ITEM NO'S 8 & (V6-S) 070 (V6-SO) 070 (V6-S) 070 (V6-SO) /8/0 0:6: M - - **** WHEN INIVIULLY ISTRIUTE, VERIFY OUMENT REVISION PRIOR TO USE. **** O NOT SLE RWING. IMS. RE IN INHES [mm] INTERPRET IMS N TOLERNES PER SME Y.M -009 UNLESS OTHERWISE SPEIFIE: LL FINISHE MHINE SURFES OR ETTER. TOLERNES: NGLES : PLE.X:.0 [0.8] PLE.XX:.0 [0.] PLE.XXX:.00 [0.] 079 (VVG ) (" NPT) 0797 (VVH ) (-/" NPT) SPRING SSIST OPEN 06 Q Matic Valve and ontrols ompany, Inc. ll rights reserved. THIR NGLE PROJETION PPROVLS RWN PPROVE HEKE TE TITLE SIZE SLE SEE REVERSE SIE FOR STNR NORMLLY OPEN MOEL OMPONENTS / SSEMLIES TO E OMPLINT N OMPTILE WITH EUROPEN UNION IRETIVE 00/9/EE (RoHS) REQUIREMENTS TLOG SHEET, V6 IPHRGM VLVE STNR MOEL Q Matic Valve and ontrols ompany, Inc. : WG NO. R07768 SHEET OF REV L

9 REVISIONS ZONE EN REV. TE PP' K RERWN - FORM # NOW WG # (WS 080), -079-WS:079, WS: NE 9.6. PPROX PPROX ITEM NO. PRT NUMER QTY (VVJ ) " NPT ENS 0778 (VVJ ) FLNGE ENS NOTE:. MERIN NTIONL STNR TPER PIPE THRES (NPT) PER NSI VLVES VILLE WITH.S.P.T. EN ONNETIONS MERIN FLNGE PER.S.. 6. LSS 8X.79[8.] X.70[9.0] OY, 7, ST IRON THREE 076 FLNGE 0898 SET, 7, MHINING RSS 070 NUT,HEX, /6"- SS 68 PLTE, IS (0 SS) 079 O-RING, ORV- FKM IS, 7 HYR 0790 TELFON IS HOLER, LUM/RONZE O-RING, -0 FKM O-RING, -7 FKM SHFT GUIE, MHINING METRI FLNGE PER S0. IN 0 & ISO R 08 LOKWSHER, /6" 079 P, 7, MHINING ST IRON 07 SREW, /8-6 X /", HX H PLTE STEEL IPHRGM SERIES 7, UN-N 077 IPHRGM SERIES 7, FKM 0777 HEX NUT, /8-6 PLTE STEEL O-RING, - LFS SHFT, 7, NO SPER, RSS HEX HE P SREW, /8-6X.00 STINLESS STEEL PLTE, UPPER IPHRGM 077 IPH PLT, 7,LWR, MH SS SSEMLY TOOLS 6 FOR INSTLLTION & REMOVL OF SHFT GUIE (ITEM #0) (NOT SHOWN) -/6" HEX SOKET PPLY LOTITE 6 HERE IPHRGM & SELS KIT ONSISTS OF ITEM NO'S (),,6,8(),9,,6() REPIR PRTS KITS 0700 (V7-R) 0706(V7-RHT) INLUES IS 0790 (7-JH), IPHRGM 077 (7-F) INLUES IS 079 (7-JT), IPHRGM 0777 (7-FV) 7 6 PPLY LOTITE 6 HERE INT. PRTS KIT (NORM. OPEN) ONSISTS OF STNR ITEM NO'S,7,0,,7,8,0, 0707 (V7-RF) O NOT PPLY TO O-RING SELS SET (ITEM NO. ) Q Matic Valve and ontrols ompany, Inc. ll rights reserved. THIR NGLE PROJETION SEE REVERSE SIE FOR ONFIGURTION OPTIONS Q Matic Valve and ontrols ompany, Inc. R888 /6/0 ::0 M - - **** WHEN INIVIULLY ISTRIUTE, VERIFY OUMENT REVISION PRIOR TO USE. **** NORMLLY OPEN (STNR) O NOT SLE RWING. IMS. RE IN INHES [mm] INTERPRET IMS N TOLERNES PER SME Y.M -009 UNLESS OTHERWISE SPEIFIE: TOLERNES: NGLES : PLE.X:.0 [0.8] PLE.XX:.0 [0.] PLE.XXX:.00 [0.] PPROVLS RWN PPROVE HEKE NE TE 0-0- TITLE TLOG SHEET, V7 IPHRGM VLVE STNR MOEL SIZE SLE : WG NO. R07769 SHEET OF REV K

10 (/8" NPT) ZONE REVISIONS EN REV. TE PP' 6 (USE WITH NORMLLY LOSE VLVES ONLY) SEE SHEET FOR LIST OF HNGES (/" NPT) (/" NPT) 8 NORMLLY LOSE MOEL ITEM NO. PRT NUMER QTY. SHFT, 7, N 0799 MLE PIPE PLUG PLTE STEEL SPRING SSIST LOSE MOEL ITEM NO. PRT NUMER QTY. NUT, SPRING RETINER RSS 07 MLE PIPE PLUGS (/8" NPT) RSS OMPRESSION SPRING O-RING,-0 UN P, 7, SPRING SSIST ST IRON (VVJ ) (THREE) 7 (VVJ ) (FLNGE) NORMLLY LOSE (VVJ ) (THREE) (VVJ ) (FLNGE) SPRING SSIST LOSE SPRING SSIST OPEN MOEL ITEM NO. PRT NUMER QTY. 9 SPRING, OMPRESSION WSHER, ENTERING RSS 076 (/" NPT) (/" NPT) 9 0 REPIR PRTS KITS INT. PRTS KIT (NORM. LOSE) ONSISTS OF STNR ITEM NO'S,7,0,,8,0,, INT. PRTS KIT (SPRING SSIST LOSE) ONSISTS OF STNR ITEM NO'S 6,7 INT. PRTS KIT (SPRING SSIST OPEN) ONSISTS OF STNR ITEM NO'S 9, 0 R0708 (V7-RG) R070 (VG-S) R0700 (V7-SO) 070 (VVJ ) (THREE) 0709 (VVJ ) (FLNGE) SPRING SSIST OPEN R888 /6/0 ::0 M - - **** WHEN INIVIULLY ISTRIUTE, VERIFY OUMENT REVISION PRIOR TO USE. **** ONVERSION KITS ONVERSION KIT (SPRING SSIST LOSE) ONSISTS OF STNR ITEM NO'S THRU 8 ONVERSION KIT (SPRING SSIST OPEN) ONSISTS OF STNR ITEM NO'S 9, 0 R0709 (V-S) R0700 (V7-SO) 06 Q Matic Valve and ontrols ompany, Inc. ll rights reserved. O NOT SLE RWING. IMS. RE IN INHES [mm] INTERPRET IMS N TOLERNES PER SME Y.M -009 UNLESS OTHERWISE SPEIFIE: TOLERNES: NGLES : PLE.X:.0 [0.8] PLE.XX:.0 [0.] PLE.XXX:.00 [0.] SEE REVERSE SIE FOR STNR NORMLLY OPEN MOEL THIR NGLE PROJETION PPROVLS RWN PPROVE HEKE TE TITLE TLOG SHEET, V7 IPHRGM VLVE STNR MOEL SIZE SLE : Q Matic Valve and ontrols ompany, Inc. WG NO. R07769 SHEET OF REV K

11 H Q Matic Valve and ontrols ompany, Inc.

12 H Q Matic Valve and ontrols ompany, Inc.

Solar Technology, Inc. P/N (left) (right) REV. Left Hand Flap Shown. Right Hand Flap Opposite.

Solar Technology, Inc. P/N (left) (right) REV. Left Hand Flap Shown. Right Hand Flap Opposite. THE INORMTION ONTINE IN THIS RWING IS THE SOLE PROPERTY O SOLR TEHNOLOGY, IN. NY REPROUTION IN PRT OR WHOLE WITHOUT THE WRITTEN PERMISSION O SOLR TEHNOLOGY, IN. IS PROHIITE. Left Hand lap Shown. Right

More information

AlphaEclipse 3600 Series A Sign Installation Instructions ( C) September 28, 2004

AlphaEclipse 3600 Series A Sign Installation Instructions ( C) September 28, 2004 lphaeclipse 3600 Series Sign Installation Instructions (9711-8001) September 28, 2004 Shop drawings The following drawings are attached: 11800000-04 (1 sheet) Single cube wiring diagram 11800000-05 (2

More information

( 6.48) SECTION S-S LEGS DIMENSION (2X) WIDTH: THICKNESS:

( 6.48) SECTION S-S LEGS DIMENSION (2X) WIDTH: THICKNESS: 1 3 4 PRT NUMER ONTT RE PLTING 1LF.75um GOL 1FLF GOL FLS 6.65.63 M3.5 1.. 3..38 8.1 ( 9.) OF IM..9 ( 6.48).1 S 11.45 1.45 7.9 R.4.1 7.5 14.5 6.5.9 13.5.9 S Z 1.9 Y 3.3.5 SETION SS SEE ETIL.9 3.18 1.51.1

More information

Series OR ISOLATION RING FLOW THRU SEAL PIPE SIZE

Series OR ISOLATION RING FLOW THRU SEAL PIPE SIZE ORR Series OR ISOLTION RING FLOW THRU SEL INSTRUMENTS The REOTEMP Isolation Ring Flow Thru Seal boasts an In-Line Flow-Thru design ideal for waste water, slurries, or abrasives. Mounted between pipe flanges

More information

SMT DDRIII SOCKET ASS'Y

SMT DDRIII SOCKET ASS'Y 1 3 4 4.00 PIN#11 1.30 KE W G 5.80 1.45 + 0.07 PIN#40 7.60 3.60 0.88#0.10 ONTT GP.0 PIN#1 1.000 133.75 0.10 SLOT LENGH PIN#10 E 147.08 REF.(160 M. LTH OPEN) 18.8 MIN. TE OE 7 SETING HEIGHT.30 0.10 0.10

More information

GEMINI PROVIDED CONTROL HARDWARE 2/16/ of 18

GEMINI PROVIDED CONTROL HARDWARE 2/16/ of 18 PROVIDED CONTROL HRDWRE /6/07 of 8 PROVIDED CONTROL HRDWRE /6/07 of 8 PROVIDED CONTROL HRDWRE /6/07 of 8 PROVIDED CONTROL HRDWRE /6/07 of 8 PROVIDED CONTROL HRDWRE /6/07 5 of 8 PROVIDED CONTROL HRDWRE

More information

MATERIAL CODES 303 Stainless Steel 304 Stainless Steel 316 Stainless Steel 17-4 PH Stainless Steel - HH Stainless Steel 6061 Aluminum

MATERIAL CODES 303 Stainless Steel 304 Stainless Steel 316 Stainless Steel 17-4 PH Stainless Steel - HH Stainless Steel 6061 Aluminum PUMP CUTWYS ND DRWINGS On the following pages are external and internal pump drawings with part numbers and material codes. The following table identifies each material code. MTERIL CODES 303 Stainless

More information

QUICK DISCONNECT COUPLINGS DIAGNOSTIC PRODUCTS

QUICK DISCONNECT COUPLINGS DIAGNOSTIC PRODUCTS PROUT TLOG P1-10 PRESSURE OMPONENTS IN. QUIK ISONNET OUPLINGS IGNOSTI PROUTS VLVES PIPE, TUE N HOSE LMPS P R O V I I N G Q U L I T Y P R O U T S S I N E 1 9 8 T L E O O N T E N T S QUIK OUPLINGS 1-39 IGNOSTIS

More information

Diaphragm Seals SANITARY TANK SPUD DIAPHRAGM SEAL. Certified EXTENSION WELD SPUD FIXTURE LENGTH "H" X = Not Included W = Weld Spud Included

Diaphragm Seals SANITARY TANK SPUD DIAPHRAGM SEAL. Certified EXTENSION WELD SPUD FIXTURE LENGTH H X = Not Included W = Weld Spud Included STP0 SPEIFITIONS Materials Process Temperature Limits mbient Temperature Limits Wetted Surface Finish Max Working Pressure iaphragm Seals SNITRY TNK SPU IPHRGM SEL Weld Spud (Optional) ody: 6L iaphragm:

More information

Series W9F FLANGED FLUSH FACE DIAPHRAGM SEALS

Series W9F FLANGED FLUSH FACE DIAPHRAGM SEALS Series W9F FLNGE FLUSH FE IPHRGM SELS REOTEMP s Flanged Flush-Face iaphragm Seals are useful in applications where a continuous flow of process across the diaphragm is required to prevent solids buildup

More information

Needle Valves Catalog 4110-NV December 2010

Needle Valves Catalog 4110-NV December 2010 Needle Valves Catalog 4110-NV December 2010 Series Needle Valves Catalog 4110-NV Introduction Parker Series nion onnet Valves have been engineered for use at pressures up to 6,000 (414 bar) and temperatures

More information

Series T51/V51/T61 THREADED OFFLINE NON-METALLIC DIAPHRAGM SEALS

Series T51/V51/T61 THREADED OFFLINE NON-METALLIC DIAPHRAGM SEALS Series T5/V5/T6 THREE OFFLINE NON-METLLI IPHRGM SELS REOTEMP s Threaded Offline Non-Metallic iaphragm Seals are designed with an upper and lower housing bolted together with a Teflon or Viton diaphragm

More information

AG INTERCHANGE IR I IRV I IRS SERIES POPPET INTERCHANGE COUPLERS Ag Style Interchange

AG INTERCHANGE IR I IRV I IRS SERIES POPPET INTERCHANGE COUPLERS Ag Style Interchange G INTERCHNGE IR I IRV I IRS SERIES POPPET INTERCHNGE COUPLERS g Style Interchange The griculture IR Series Hydraulic Quick Couplings offer automatic shut-off during disconnection. The IR features a variety

More information

Check Valves PRODUCT DESCRIPTION FEATURES & BENEFITS TECHNICAL SPECIFICATIONS

Check Valves PRODUCT DESCRIPTION FEATURES & BENEFITS TECHNICAL SPECIFICATIONS Check Valves PRODUCT DESCRIPTION CPI check valves are designed for high pressure applications where reverse flow and leakage must be kept to a minimum. Typical applications include engine, pump and compressor

More information

Table of Contents Table of Contents

Table of Contents Table of Contents 9000 Table of ontents Table of ontents Introduction...................................................................9000. 9000 Scope of esign...........................................................9000.3

More information

Premier Care Cliner Parts List 1 2

Premier Care Cliner Parts List 1 2 Page of 7 3 4 PRTS LIST 400530 CSTER, NYLON 3" TOTL LOCK, LIGHT GRY 3 400540 CSTER, NYLON 3" DIRECTIONL LOCK, LIGHT GRY 566505 SCREW-MCH /4-0 X /4 RND PHILLIP M/S ZINC 4 56604 NUT-/4-0 HEX NYLON LOCKNUT

More information

Instrument Assembly Quick Guide

Instrument Assembly Quick Guide Instrument ssembly Quick Guide assembly_qg_br.0, 07/8 08 shcroft Inc. assembly_qg_br.0, Rev., 06/8 info@.800.38.858 ssembly Resource ssembly Information LL SHROFT SSEMLIES RE DESIGNED Y OUR ENGINEERS TO

More information

Rotoroll OK! User's Guide

Rotoroll OK! User's Guide Rotoroll Pge Sfety preution. The user must never open Rotoroll to inspet it, reple prts or unertke repirs. The reeling mehnisms spring my pop out of its set n use mge n injury to persons, nimls n ojets

More information

MFD Filters (MGF Series) 8.3. MFD Mini Regulators (MSR Series) 8.4. MFD General Purpose Regulators (MGR Series) 8.5

MFD Filters (MGF Series) 8.3. MFD Mini Regulators (MSR Series) 8.4. MFD General Purpose Regulators (MGR Series) 8.5 ir Preparation Equipment MFD Filters (MGF Series) 8.3 MFD Mini Regulators (MSR Series) 8.4 MFD General Purpose Regulators (MGR Series) 8.5 MFD General Purpose Lubricators (MGL Series) 8.6 MFD Filter -

More information

TECHNICAL SPECIFICATIONS. Carbon Steel / Stainless Steel One piece design BALL. Stainless Steel MAXIMUM OPERATING TEMPERATURE CRACKING PRESSURE

TECHNICAL SPECIFICATIONS. Carbon Steel / Stainless Steel One piece design BALL. Stainless Steel MAXIMUM OPERATING TEMPERATURE CRACKING PRESSURE Check Valves PRODUCT DESCRIPTION CPI check valves are designed for high pressure applications where reverse flow and leakage must be kept to a minimum. Typical applications include engine, pump and compressor

More information

NPT (LP) 3000# & 6000# FITTINGS AND SMALL DIAMETRE SCHEDULE FITTINGS A105/LF2/A106/WPB

NPT (LP) 3000# & 6000# FITTINGS AND SMALL DIAMETRE SCHEDULE FITTINGS A105/LF2/A106/WPB NPT (LP) 3000# & 6000# FITTINGS AND SMALL DIAMETRE ULE FITTINGS A105/LF2/A106/WPB TYPE X X 1 CAP 20 3/4 6000LB NPT 10 A105N NACE CAP 25 1 6000LB NPT 40 A105N NACE CAP 40 1 1/2 3000LB NPT 60 A105N CAP 40

More information

In-Line Accessories. In-Line Pressure Gauges. Pressure Gauges. In-Line Accessories

In-Line Accessories. In-Line Pressure Gauges. Pressure Gauges. In-Line Accessories Pressure Gauges Pressure gauges for monitoring system pressure Hoses and test points for sampling oil and determining ISO cleanliness levels Flanges to connect components Valves for system control In-Line

More information

Interchange Coupling. Poppet: Interchange Coupling

Interchange Coupling. Poppet: Interchange Coupling griculture Overview Stucchi griculture Series couplings are offered with a choice of either ball or poppet valve mechanisms for automatic shut-off during disconnection. The ball mechanism is the IR series,

More information

Inline Filters (F Series) Catalog 4130-F July 2005

Inline Filters (F Series) Catalog 4130-F July 2005 Inline Filters (F Series) Catalog 4130-F July 2005 Catalog 4130-F Introduction Parker are designed for protection of instrumentation systems from undesirable materials. Component changes or repair and

More information

Air Preparation Equipment

Air Preparation Equipment rochure ir Preparation quipment Setting a new standard for: Quality Reliability Value lobal ompatibility ilters M Series M ir Preparation quipment M -8-S-W- MOL imensions (mm, except where noted) RKT INLU

More information

Tru-Fit 10k Fittings

Tru-Fit 10k Fittings Tru-Fit 10k Fittings TruFit 10K Pipe and Adapter Fittings are designed and manufactured to provide a reliable connection in high pressure systems running to 10,000 psi. Manufactured from fully-traceable

More information

BGS MODEL HP-165M FLUID END PARTS LIST

BGS MODEL HP-165M FLUID END PARTS LIST BGS MODEL HP-165M FLUID END PARTS LIST ITEM PART NUMBER REQ'D PART DESCRIPTION NO. QTY 001 BGS 008-024179-350 1 POWER FRAME 007 BGS 170-012005-353 1 PIPE PLUG, MAGNETIC 014 BGS 001-013059-999 1 FILTER/BREATHER

More information

V-TEK Hygienic Butterfly Valves

V-TEK Hygienic Butterfly Valves STINLSS STLS LT. V-TK Hygienic utterfly Valves V-TK utterfly Valves have proven functionality and reliability. esigned in 1998, the V-TK valve allows full interchangeability of most handles, actuators

More information

TECHNICAL CHARACTERISTICS BEHAVIOUR WITH CHEMICAL AND ATMOSPHERIC AGENTS

TECHNICAL CHARACTERISTICS BEHAVIOUR WITH CHEMICAL AND ATMOSPHERIC AGENTS LE GLNS able glands and plastic accessories Regulatory ompliance: able Glands: EN 50262; IE 62444 Metric pitch: IE/EN 60243 PG pitch: IN 40430 ouplings and cable glands: EN 61386-1 e EN 60670-1 as applicable

More information

Table of Contents. Mark 3, SPA 3 & PA 3 Series

Table of Contents. Mark 3, SPA 3 & PA 3 Series Table of Contents...3-9 NSI Symbols... 3 Technical and Operating Data.... How to Order....5-6 Valve with ase....7-8 Manifold lock ssembly...9-0 Sandwich ressure Regulator.... Regulator Service Kits....

More information

FILTER REGULATORS AND PARTS

FILTER REGULATORS AND PARTS COMPRESSED AIR ACCESSORIES PRICING 5-2017 WWW.RAPIDAIRPRODUCTS.COM 800-954-3310 FILTER REGULATORS AND PARTS 175psi MAX INLET, 0-150psi adjustment range PRICE QUANTITY K93210 INLINE REGULATOR W/GAUGE, 1/4"

More information

Mechanically actuated valves

Mechanically actuated valves Mechanically actuated valves /2-5/2 spool valves with /8 NPT threaded ports Installation in any position Comprehensive range of actuations, direct or servo-piloted Special versions on request Materials

More information

UNITED s Tool Holder Bushings and Accessories

UNITED s Tool Holder Bushings and Accessories Tool Holder ushings s Tool Holder ushings and ccessories You Will Want to Hold With These! HT Tool Holder ushing with Long Slots H Split ushing With lat HJ With 4 learance Holes HH Knurled Head ollet HP

More information

J320, J330 and J340 PLUMBING PARTS CATALOG

J320, J330 and J340 PLUMBING PARTS CATALOG PREMIUM J0, J0 and J0 PLUMBING PARTS CATALOG PREMIUM PUMP Pump/Motor # Location (for the J0 and J0) Pump/Motor # Location (for the J0) * 9 0 * 00- HOUSING: FRONT 00-90 O-RING: FRONT HOUSING 00-9 IMPELLER:.9

More information

METROPOLITAN WASHINGTON AIRPORTS AUTHORITY

METROPOLITAN WASHINGTON AIRPORTS AUTHORITY ITM NO. QTY SRIPTION MNUTURR PRT NUMR SSY, LT & RIGHT SKIRTING, PLNMT RR NOPY OPN SOUR 900 SSY, UPPR & LOWR SKIRTING, PLNMT RR NOPY OPN SOUR 900 Polyurethane-oated Nylon abric.0" Thick, Gray (cut to "

More information

PL SkyAir, Packaged Outdoor Units R30NUV1, RU30NUY1 RUR20NY1, RUR20NY1R2, RUR20NY1S, RUR20NY1SR2 RUR20NY1R1, RUR20NY1SR1

PL SkyAir, Packaged Outdoor Units R30NUV1, RU30NUY1 RUR20NY1, RUR20NY1R2, RUR20NY1S, RUR20NY1SR2 RUR20NY1R1, RUR20NY1SR1 Skyir, Packaged Outdoor Units R30NUV1, RU30NUY1 RURNY1, RURNY1R2, RURNY1S, RURNY1SR2 RURNY1R1, RURNY1SR1 eiling assette - OYL Malaysian Products, 25, 30, 40, 50, R, 25R, 30R, 40R, 50R 5D, 5D25, 5D30, 5D40,

More information

Submersible. Pumps Motors. 60Hz 4 Submersible Pump. Pumping Solution

Submersible. Pumps Motors. 60Hz 4 Submersible Pump. Pumping Solution Submersible Pumps Motors Hz Submersible Pump Pumping Solution Product data Submersible bore well pumps Construction Submersible motor & pumps for deep wells of (DN mm). Sized for connection to the motor

More information

J350, J360 and J370 PLUMBING PARTS CATALOG

J350, J360 and J370 PLUMBING PARTS CATALOG PREMIUM J0, J0 and J0 PLUMBING PARTS CATALOG PUMP Pump/Motor # * 0 * 00- HOUSING: FRONT 00-0 O-RING: FRONT HOUSING 00- IMPELLER:. DIA 00-0 PUMP: SEAL ASSY / VITON 00- HOUSING: REAR BRACKET 00-0 MOTOR:.HP

More information

Fittings, Tubing & Nipples

Fittings, Tubing & Nipples s, Tubing & Nipples P Series Pipe s s to 15,000 psi (1034 bar) Since 1945 utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and manufacturing

More information

SuperCaliper SERIES 500 No battery or origin reset needed for IP67 digital caliper

SuperCaliper SERIES 500 No battery or origin reset needed for IP67 digital caliper SuperCliper SERIES 500 No ttery or origin reset neee for IP67 igitl liper With no nnoying origin restortion neessry, mesurement n e strte ny time n there is no restrition on operting spee. Insuffiient

More information

needle valves 3700, 3800, 3900 Series Forged Body, Integral Bonnet Needle Valves

needle valves 3700, 3800, 3900 Series Forged Body, Integral Bonnet Needle Valves orged ody, Integral onnet Needle Valves Offered in four different body materials, this group of valves can handle a wide range of general purpose liquid and gas applications. Six types of stem tips are

More information

Side Channel R ing Blower

Side Channel R ing Blower Side Channel R ing Blower ------------------------------------- INSTRUCTION MNUL ------------------------------------ RB20../ 30../ 40../ 50../ 60 / 80.. SERIES CONTENT PGE 1. SFETY REQUIREMENT... 1 2.

More information

MOUNTING ACCESSORIES, GAS HEATERS

MOUNTING ACCESSORIES, GAS HEATERS MOUNTING SSORIS, GS HTRS YLINDR RKTS Wall mount cylinder holders are an essential accessory to all manifolds. or safe containment of cylinders not greater than 9 12 in diameter. quipped with plated safety

More information

Product Index by Coupler Style & Interchange

Product Index by Coupler Style & Interchange Product Index by Coupler Style & Interchange Flat Face Style Series Description Page # A Premier ISO 16028 Interchange Flat Face Coupling In accordance with ISO 16028 for Interchange and Performance. s:

More information

Original Chiksan Swivel Joints

Original Chiksan Swivel Joints Original hiksan Swivel Joints Steamlined bore minimizes flow restrictions Smooth, round bore design minimizes turbulence and pressure drop, Longsweep and TripleStep swivel joints have extralong radius

More information

TEKNOCRAFT INC. Proportional Valves. Mini Valves. Outlet Balanced Valves. Standard Valves. Your Proportional Valve Specialists

TEKNOCRAFT INC. Proportional Valves. Mini Valves. Outlet Balanced Valves. Standard Valves. Your Proportional Valve Specialists TEKNOCRAFT INC. Your Proportional Valve Specialists Proportional Valves Mini Valves Outlet Balanced Valves Standard Valves Table of Contents Teknocraft Unique Designs... 3 Mini Valves... 6 Outlet Balanced

More information

Misc: Interchange Coupling

Misc: Interchange Coupling Wing Style Interchange Coupling Misc: Interchange Coupling Series: W Interchange: Parker 6100 - Seals: Nitrile - Threaded sleeve allows connection/disconnection under pressure - Coupler: brass material

More information

Cam & Groove Fittings. King Nipples

Cam & Groove Fittings. King Nipples Cam & Groove Fittings King Nipples Index Aluminum Type A, Male Adapter x Female NPT...3 Type B, Female Coupler x Male NPT...3 Type C, Female Coupler x Hose Shank...4 Type D, Female Coupler x Female NPT...4

More information

83. TP, TPE, TPD, TPED

83. TP, TPE, TPD, TPED Service Kit Catalogue 20 50/60 Hz TP Series 100 and 200 TP, TPE, TPD, TPED. TP, TPE, TPD, TPED TP Series 100 and 200 50/60 Hz Shaft seal model A Pos. Pump shaft diameter [mm] 12 25 All 32-50/2-80/2-90/2-30

More information

ROTARY UNION 9000 SERIES GENERAL PURPOSE MODELS ADDED MODELS ADDED. Operating Parameters FEATURES & BENEFITS MEDIA PRESSURE* TEMPERATURE* SPEED*

ROTARY UNION 9000 SERIES GENERAL PURPOSE MODELS ADDED MODELS ADDED. Operating Parameters FEATURES & BENEFITS MEDIA PRESSURE* TEMPERATURE* SPEED* ROTARY UNION 9 SERIES GENERAL PURPOSE Operating Parameters Steam, Hot Oil, Water MEDIA PRESSURE* 25 psi (Water), 75 psi (Steam), psi (Hot Oil) MODELS ADDED MODELS ADDED TEMPERATURE* 6 F (Hot Oil), 378

More information

Plant - 1. Plant - 2. Plant - 3

Plant - 1. Plant - 2. Plant - 3 Plant - Plant - Plant - Declaration of Conformity We Lubi Electricals Limited hereby declare under our responsibility that the products LSS Series Centrifugal Pump is in conformity to the following CE

More information

POLYETHYLENE CHAIN GUIDE RAIL

POLYETHYLENE CHAIN GUIDE RAIL 14 POLYETYLENE CIN GUIE RIL POLYETYLENE CIN GUIE RIL Material: PE-UM igh molecular weight polyethylene (p.m. other 1.000.000). PROFILE T Profile T CIN Size Guide eight for SIMPLE chain P. NUMER CIN ISO

More information

Today s Improved Compressed Air Piping Method

Today s Improved Compressed Air Piping Method STEP 1 STEP 2 STEP 3 (see page 8 for detailed instructions) Today s Improved Compressed Air Piping Method FAST INSTALLATION TIME -Aluminum piping is easy to cut and lift -O-ring seals ensure a leak free

More information

20 Flanges & Fittings - Sales Item

20 Flanges & Fittings - Sales Item 20 s & Fittings - Sales Item 20010710 New s Immediate Delivery at Preferential Prices Available UK ist as Amended / Over Order Prime European Manufacture complete with 3.1 Certificates. Our Client (UK

More information

JB90A. FS65 Balanced-Pressure Series

JB90A. FS65 Balanced-Pressure Series J90 S W I V E L J O I N T S S65 alanced-pressure Series eatures and enefits New eroquip S65 alanced-pressure Series swivel joints answer customer requests for a more cost competitive, compact product.

More information

1 of E 00 PARAPET GUARDRAIL ATTACHMENT STANDARD PLAN NO (MGS SHOWN) 6" ` 12" ` 14 " + " S3 ` 5.7 POST WING PARAPET PLAN VIEW DELINEATOR

1 of E 00 PARAPET GUARDRAIL ATTACHMENT STANDARD PLAN NO (MGS SHOWN) 6 ` 12 ` 14  +  S3 ` 5.7 POST WING PARAPET PLAN VIEW DELINEATOR pproved Date MMM YYYY RODWY DEIGN DIVIION WING PRPET PLN VIEW DELINETOR '-1 " '-1 " '-1 " '-" () PRPET PRPET TNDRD LINE POT MOUNTED POT NOTE: Com puter: DRDEIGN147 CULVERT WLL CULVERT LB ELEVTION (MG HOWN)

More information

OWNERS MANUAL UPPERTONE. Physical Therapy Equipment Model No. UT 93A

OWNERS MANUAL UPPERTONE. Physical Therapy Equipment Model No. UT 93A OWNERS MNUL UPPERTONE Physical Therapy Equipment Model No. UT 93 GPK Inc., 535 Floyd Smith Dr., El Cajon, C 900, 800-468-89, 69-593-738, Fax: 69-593-754, www.gpk.com TLE OF CONTENTS Uppertone Parts List

More information

Ball Valves. BV & BT Series. Features. Pressure vs. Temperature. Technical Data. Pressure Ratings

Ball Valves. BV & BT Series. Features. Pressure vs. Temperature. Technical Data. Pressure Ratings Ball Valves & Series Features Any end type and size combination available upon request Adjustable stem seal can be maintained in-line Panel mountable Bi-directional flow All valves are 00% factory tested

More information

Dimensions (Pneumatic) In.

Dimensions (Pneumatic) In. Sheet No.: CBPI 3.01 Rev. C Double-Acting s CBBXXX A B C D E F G H J/K L M N CBB315 14.16 7.38 3.25 1.00 1.88 3.46 0.94 0.94 1/4 NPT.313-18 UNC 0.38 2.250 CBB420 16.43 8.57 4.25 1.44 2.13 4.37 1.10 1.10

More information

Hydraulic Motor & Brake

Hydraulic Motor & Brake whitedriveproducts SERIES 00-0 - 0 - HEVY DUTY Hydraulic Motor & rake DT DT (ll Series) For Heavy Duty pplications whitedriveproducts Overview series descriptions The most amazing aspect of the DT Series

More information

In-Line Check Valves. Features. Valves. Working Pressures to: Flow Ranges to:

In-Line Check Valves. Features. Valves. Working Pressures to: Flow Ranges to: Valves In-Line Check Valves Working Pressures to: Flow Ranges to: 5700 psi/393 bar 200 gpm 757 lpm Features Steel constructed check valves are compatible with all non-corrosive liquids. Valves contain

More information

FITTINGS. Pneufit C composite and Pneufit M fittings Inch Ø 1/8" to 1/2" O/D tube

FITTINGS. Pneufit C composite and Pneufit M fittings Inch Ø 1/8 to 1/2 O/D tube Pneufit C composite and Pneufit M fittings Ø 1/8" to 1/2" Ready to use. Over 1,000 composite push-in pneumatic fittings. Releasable stainless-steel grab-ring to grip nylon or polyurethane (8 or 9 durometer).

More information

Impact resistant PBT body in black for Pneufit C and light gray for Pneufit M.

Impact resistant PBT body in black for Pneufit C and light gray for Pneufit M. Pneufit C composite and Pneufit M fittings Ø Â" to Ë" Ready to use. Over 1,000 composite push-in pneumatic fittings. Releasable stainless-steel grab-ring to grip nylon or polyurethane (85 or 95 durometer).

More information

Directional Valves electro-hydraulically operated (new series) Huade América 1

Directional Valves electro-hydraulically operated (new series) Huade América 1 Directionl Vlves electro-hydruliclly operted (new series) Hude Améric 1 BEIJING HUADE HYDRAULIC INDUSTRIAL GROUP CO.,LTD. Directionl vlves electro-hydruliclly operted (new series) Size 10 to 32 up to 35

More information

INTEGRAL-BONNET NEEDLE VALVES H-300 SERIES

INTEGRAL-BONNET NEEDLE VALVES H-300 SERIES INTEGRAL-BONNET NEEDLE VALVES SERIES INTEGRAL-BONNET NEEDLE VALVES SERIES FEATURES n Straight and angle pattern n Stainless Steel and Brass construction n MAWP 5000 psi (345 bar) n MAWT 446 F (230 C) n

More information

Directional spool valves hand lever operated type WMM6 rotary knob operated type WMD6 roller operated type WMR6 hydraulically operated type WH6

Directional spool valves hand lever operated type WMM6 rotary knob operated type WMD6 roller operated type WMR6 hydraulically operated type WH6 Directionl spool vlves hnd lever operted type WMM6 rotry kno operted type WMD6 roller operted type WMR6 hydruliclly operted type WH6 3 NS6 up to 31,5 M up to 80 dm /min D SHEE - OERION MNUL WK 421 180

More information

Japanese Industrial Standard 30 Flare (BSPP Threads)

Japanese Industrial Standard 30 Flare (BSPP Threads) Japanese Industrial Standard () Connection Types / Identification Japanese Industrial Standard hydraulic connections include 30 flare and 30 cone connections (both internal sealing), parallel and tapered

More information

Chapter 7. Control and Coordination

Chapter 7. Control and Coordination Chpter 7 Control n Coorintion 1 Whih of the following sttements is orret out reeptors? Gusttory reeptors etet tste while olftory reeptors etet smell Both gusttory n olftory reeptors etet smell Auitory

More information

4/2 and 4/3-way Directional Valves Pilot Operated Model 4 WEH Externally Pilot Operated Model 4 WH

4/2 and 4/3-way Directional Valves Pilot Operated Model 4 WEH Externally Pilot Operated Model 4 WH R 24 75/9.99 R 24 75/9.99 Replces: 6.98 4/2 nd 4/3-wy Directionl Vlves ilot Operted Model 4 WEH Externlly ilot Operted Model 4 WH Sizes to 32 Series 4, 6, 7 Mximum pressure up to 576 SI (35 r) Mximum volume

More information

PARTS CATALOG NOMENCLATURE DES PIÈCES. Pro-Torque Trimmer Attachment. L attachement Coupe-herbe Pro-Torque ECHO, INCORPORATED

PARTS CATALOG NOMENCLATURE DES PIÈCES. Pro-Torque Trimmer Attachment. L attachement Coupe-herbe Pro-Torque ECHO, INCORPORATED ccessories for ECHO products can be found at: Pour obtenir des accessoires pour les produits ECHO, consulter notre catalogue d'accessoires à: http://www.echo.ca/products/catalogs FITS MODELS / POUR LES

More information

ON/OFF zone valves (PN 16) AMZ 112, AMZ 113

ON/OFF zone valves (PN 16) AMZ 112, AMZ 113 ata sheet ON/OFF zone valves (PN 16) MZ 112, MZ 11 escription MZ 112 / 2-port valve N15-N2 MZ 112 / 2-port valve N40-N50 MZ 11 / -port valve The ON / OFF zone valves type MZ 112 and MZ 11 are typical used

More information

4/2 and 4/3-Way Directional Control Valves Pilot Operated Model 4WEH Externally Piloted, Model 4 WH

4/2 and 4/3-Way Directional Control Valves Pilot Operated Model 4WEH Externally Piloted, Model 4 WH 4/2 nd 4/3-Wy Directionl Control Vlves ilot Operted Model 4WEH Externlly iloted, Model 4 WH Size to 32 up to 5 SI (35 r) up to 29 GM ( L/min) R 24 75/6.98 R 24 75/2.95 Replces: 5.94 Fetures: Solenoid pilot

More information

12 EEx d-conduit Material

12 EEx d-conduit Material 12 EEx d-conduit Conduit Fittings Conduit fittings, BMF, with female/male union Series Nominal Ordering code Weight RN2095 BMF 1 1 /2" NPT 461 557 0 0,15 BMF 2 3 461 558 0 0,20 BMF 3 1" NPT 461 559 0 0,28

More information

TABLE 1 - MICRON CODE CODE XX NOM. ABS. 2X AS 1098

TABLE 1 - MICRON CODE CODE XX NOM. ABS. 2X AS 1098 NOTS: 1. 2.. 4.. 6. 7. 1 2 4 MTRIL: ITTING: 04/04L STNR; 16/16L HN -16 IS TO N O P.N. IS: 16/16L STNR; 04L HN SPII. S ROUTR OR PRT MKUP. IS IR SRN MK UP PR N02-04. SSML PR OPM-02. SIGN: PR 1. RITRI; MIN

More information

Compressor Accessories

Compressor Accessories Compressor Accessories Series 11 Superior quality for superior performance COMPRESSOR OIL Description MINERAL 11.1100 1 litre container 11.1400 4 litre container SYNTHETIC 11.1200 1 litre container 11.1500

More information

Direct Vent Energy Saver (DS) Models

Direct Vent Energy Saver (DS) Models RESIDENTIAL GAS REPLACEMENT PARTS LIST Direct Vent Energy Saver (DS) Models Includes Hydrojet Total Performance System Effective: July 31, 2008 ECO 7291-2 NOTE: BOTH MODEL AND SERIAL NUMBERS ARE REQUIRED

More information

Click the column to open specific parts pages FLOAT KITS MACHINE

Click the column to open specific parts pages FLOAT KITS MACHINE Click the column to open specific parts pages FLOAT KITS LIFT FLOAT KITS ANGLE FLOAT KITS MACHINE 7434571 8126346 8126326 8126327 8126355 8126356 8126335 8126336 8126337 8126351 8126338 8126352 8126261

More information

Ross Brown Sales Pty. Ltd. Portable Pressure/Vacuum Comparator

Ross Brown Sales Pty. Ltd. Portable Pressure/Vacuum Comparator Ross Brown Sales Pty. Ltd. Portable Pressure/Vacuum Comparator The data provided above is for information purposes only and no warranty of accuracy or reliability is given. Page 17 of 30 Pressure Generating

More information

SUN VALLEY STOVE COMPANY

SUN VALLEY STOVE COMPANY LO HI ON PILOT LO HI ON PILOT SUN VALLEY STOVE COMPANY VENT-FREE NATURAL GAS STOVE HEATER ILLUSTRATED PARTS BREAKDOWN MSVFBNR 1 2 6 21 3 7 4 21 11 22 9 12 23 10 13 OFF 1 17 24 14 16 17 1 19 OFF 12 OWNER

More information

ET 100 EXTERIOR FRONT DOOR BLACK OUT TAPE INSTALLATION

ET 100 EXTERIOR FRONT DOOR BLACK OUT TAPE INSTALLATION 100 EXTERIOR FRONT DOOR BLCK OUT TPE INSTLLTION The procedure descried elow is for the LH side. Use the sme procedure for oth the RH nd LH sides, unless otherwise specified. 1. INSTLL NO. 2 BLCK OUT TPE

More information

S51 Series. Thread Together, Maximum Flow with Minimum Spillage

S51 Series. Thread Together, Maximum Flow with Minimum Spillage S51 Series S A F E W A Y H Y D R A U L I C S Document No. 7951 rev. 003 Thread Together, Maximum Flow with Minimum Spillage Minimum Spill, High Flow, Heavy-Duty Quick Coupling SafeWay s S51 Series is a

More information

Block and Bleed Valves

Block and Bleed Valves lck and leed Valves M, MD, M, MD and V3, V4 Series www.finelk.cm www.fitkgrup.cm lck and leed Valves lck and leed Valves Maximum wrking pressure: psig (689 bar) Wrking temperature up t 85 F (454 ) with

More information

Adapters Quick Reference Guide

Adapters Quick Reference Guide Adapters Quick Reference Guide Minimizing Downtime in a Variety of Industries Construction Demolition Distribution Equipment Rental Excavation Manufacturing Marine Material Handling Municipalities Recycling

More information

DURASEAL. High Integrity, Double Block and Bleed Plug Valve.

DURASEAL. High Integrity, Double Block and Bleed Plug Valve. DURSEL High Integrity, Double lock and leed Plug Valve www.franklinvalve.com How the DuraSeal Works TLE O ONTENTS 3. Duraseal - Internal View 4. Operation/pplications 5. Standard Materials of onstruction

More information

B16.11 FORGED 3000# & 6000# FITTINGS AND SMALL DIAMETRE SCHEDULE FITTINGS A105/LF2/A106/WPB

B16.11 FORGED 3000# & 6000# FITTINGS AND SMALL DIAMETRE SCHEDULE FITTINGS A105/LF2/A106/WPB B16.11 FORGED 3000# & 6000# FITTINGS AND SMALL DIAMETRE ULE FITTINGS A105/LF2/A106/WPB TYPE X X CAP 15 1/2 3000LB NPT 70 A105N CAP 20 3/4 6000LB NPT 10 A105N NACE LAME ITALY CAP 25 1 6000LB NPT 40 A105N

More information

HAMMER STRENGTH MTSAB ABDOMINAL CRUNCH. Customer Support Services PARTS LIST. Page 1

HAMMER STRENGTH MTSAB ABDOMINAL CRUNCH. Customer Support Services PARTS LIST. Page 1 HAMMER STRENGTH MTSAB ABDOMINAL CRUNCH Page Customer Support Services PARTS LIST Contents PAGE COMPONENT ASSEMBLY COMPONENT ASSEMBLY LEGEND RIGHT SIDE ASSEMBLY RIGHT SIDE ASSEMBLY LEGEND LOWER ARM ASSEMBLY

More information

Fittings. Hose Accessories 70R SERIES 70R0106S REFRIGERANT HOSE FITTING NUMBERING SYSTEM RED DOT

Fittings. Hose Accessories 70R SERIES 70R0106S REFRIGERANT HOSE FITTING NUMBERING SYSTEM RED DOT 70R SERIES Fittings Hose ccessories REFRIGERNT HOSE FITTING NUMERING SYSTEM The first two digits indicate that the part is a fitting or a related fitting component. The sixth digit indicates the fitting

More information

12 series (Pneufit) Push-in fittings Ø 1/8... 1/2, Ø mm tube size, BSP and NPT threads

12 series (Pneufit) Push-in fittings Ø 1/8... 1/2, Ø mm tube size, BSP and NPT threads 2 series (Pneufit) Push-in fittings Ø /8... /2, Ø 4... 2 mm tube size, SP and NPT threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage ll taper

More information

ORIFICE FLOW METERS WITH CHAMBERS MEASURING RINGS

ORIFICE FLOW METERS WITH CHAMBERS MEASURING RINGS Bulletin E79 rev0 02/03/03 ORIFICE FLOW METERS WITH CHAMBERS MEASURING RINGS POP-U-S SERIES FEATURES UNI PN6 flanges: iron Chamber measuring rings: iron Disc: AISI30 Max. operating temperature: 00 C Max.

More information

IIS01_05 PC-1 REVISED TABLE A TO (SEE NOTE 2) IIS01_07 PC-1 REVISED TABLE A TO INCLUDE POLYPROPYLENE PIPE

IIS01_05 PC-1 REVISED TABLE A TO (SEE NOTE 2) IIS01_07 PC-1 REVISED TABLE A TO INCLUDE POLYPROPYLENE PIPE PGE INTERIM STNR REVISION 1. IIS1_ P-1 REVISE TBLE TO (SEE NOTE ) 1. IIS1_ P-1 REVISE PE PIPE HRT REMOVE VITRIFIE LY PIPE E POLYPROPYLENE PIPE REVISE NOTES N N E NOTE. 1.1 IIS1_ P-1 REVISE TBLE TO INLUE

More information

Plant, components and devices for very high and high pressures (7000 bar and over)

Plant, components and devices for very high and high pressures (7000 bar and over) Plant, components and devices for very high and high pressures (7000 bar and over) VALVES AND FITTINGS UP TO 1035 BAR MATERIALS All fittings are manufactured from EN 1.4404 / AISI 316L stainless steel

More information

NELES ROTARYGLOBE CONTROL VALVE, SERIES ZX

NELES ROTARYGLOBE CONTROL VALVE, SERIES ZX NLS ROTRYGLOB CONTROL VLV, SRIS ZX Metso's Neles RotaryGlobe control valve is designed to control a wide range of process liquids, gases and vapors. Its reliable and rugged construction with variety of

More information

Lesions of prefrontal cortex reduce attentional modulation of neuronal responses. and synchrony in V4

Lesions of prefrontal cortex reduce attentional modulation of neuronal responses. and synchrony in V4 Lesions of prefrontl ortex reue ttentionl moultion of neuronl responses n synhrony in V4 Georgi G. Gregoriou,, Anrew F. Rossi, 3 Leslie G Ungerleier, 4 Roert Desimone 5 Deprtment of Bsi Sienes, Fulty of

More information

ROTARY UNION 5000 SERIES STAINLESS STEEL - GENERAL PURPOSE MODELS ADDED. Operating Parameters FEATURES & BENEFITS CONFIGURATION OPTIONS

ROTARY UNION 5000 SERIES STAINLESS STEEL - GENERAL PURPOSE MODELS ADDED. Operating Parameters FEATURES & BENEFITS CONFIGURATION OPTIONS ROTARY UNION 5 SERIES STAINESS STEE - GENERA PURPOSE Operating Parameters SPEED,, 3,6 (MT) PRESSURE 75 psi (Water), psi (Steam), psi (Hot Oil), 3 psi (Air) TEMPERATURE 3 F (Water), 35 F (Steam), 395 F

More information

Quick Sealing with a Twist to Connect Actuation Method

Quick Sealing with a Twist to Connect Actuation Method - Finger tighten seals up to 689 bar (10,000 psi) for pneumatic and hydraulic testing - Safe and Reliable leak tight connections to male and female threads - Eliminate thread damage, sealant and wrenches

More information

Digimatic Caliper. Digimatic Height Gages. Linear Height. Depth Gages

Digimatic Caliper. Digimatic Height Gages. Linear Height. Depth Gages Smll Tool Instruments n t Mngement igimti Cliper igimti Height Gges iner Height epth Gges SuperCliper ABSOUTE Coolnt Proof Cliper ABSOUTE igimti Cliper INEX Cliper SuperCliper -2 ABSOUTE Solr Cliper -3

More information

Contents. Coming soon from Teryair!!

Contents. Coming soon from Teryair!! Technical products for the ship suppl y industry Contents Teryair is a specialist manufacturer of precision pneumatic tools and marine industrial equipment. Our factories in Mumbai, India are certified

More information

12 series (Pneufit) Push-in fittings

12 series (Pneufit) Push-in fittings > > Port size: Ø /8... /2, Ø 4... 2 mm tube size, SP and NPT threads > > Very compact units > > asy tube insertion for rapid assembly of pneumatic circuits > > Positive tube anchorage > > ll taper threads

More information

Premium Chemical Free Iron/Sulphur Filter Installation Manual

Premium Chemical Free Iron/Sulphur Filter Installation Manual Premium Chemical Free Iron/Sulphur Filter Installation Manual 220 Bayview Avenue Unit 18 Barrie, Ontario, Canada, L4N 4Y8 www.excaliburwater.com EXCALIBUR PREMIUM CHEMICAL FREE IRON/SULPHUR FILTER INSTALLATION

More information

Applications. Projected Area: 1.9 Sq. Ft. Dimensions in Inches/Millimeters

Applications. Projected Area: 1.9 Sq. Ft. Dimensions in Inches/Millimeters NEC/CEC: Applications Powerful, efficient weatherproof lighting for medium and large areas such as: Shopping malls Parking lots Sports areas New-car lot lighting Security lighting Industrial process lighting

More information