SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Transcription

1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SHERWIN-WILLIAMS AUTOMOTIVE FINISHES CORP. Testing Laboratory 4440 Warrensville Center Road Warrensville Heights, OH David Allerton Phone: MECHANICAL Valid To: April 30, 2019 Certificate Number: In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following tests on paints: Test Description: Abrasion / Scuff / Wear Resistance ASTM D4060; FLTM BN , FLTM BN ; GMW 3208; SAE J365, SAE J948; Toyota TSH3130G (4.14); GMW (Appendix K) Accelerated Artificial Weathering ASTM G151, ASTM G154, ASTM G155, ASTM D4587; FLTM BO , FLTM BO ; GM9125P (Inactive 2013) 1 ; SAE J1885 (Inactive 2008) 1, SAE J1960 (Inactive 2008) 1, SAE J2020, SAE J2527, SAE J2412; Toyota TSH 3130 (4.17) Adhesion ASTM D3359; FLTM BI , FLTM BI ; GMW 14829; ISO 2409; JIS D0202; John Deere JDH 612; Navistar GT-5A, Navistar GT-5C; Toyota TSH 1503G; Volvo STD ; Appearance Evaluation ASTM D714, ASTM D1654, ASTM D610; ISO , ISO ; Volvo STD Brittleness Evaluation Freightliner ; GM9506P (Inactive 2013) 1 (A2LA Cert. No ) 07/20/2017 Page 1 of 4

2 Chemical Resistance / Spot Tests ASTM D1308, ASTM D5402, ASTM D4752; Chrysler: LP-463KC-21-01, LP-463PB-31-01; Ford: FLTM BI , FLTM BI , FLTM BI , FLTM BI , FLTM BI , FLTM BI , FLTM BO ; Ford: WSS-M15J14-A (3.5.13), WSS-M99J385-A (3.7.16), WSSM-M15J15-A (3.5.13), WSSM-M15J16-A (3.5.13), WSSM2P188-A (3.4.14); GM9240P (Inactive 2013) 1, GM9500P (Inactive 2010) 1, GM9501P (Inactive 2010) 1, GM9517P (Inactive 2012) 1, GM9736P (Inactive 2011) 1, GMN10033 (Inactive 2011) 1 ; GMW 14333, GMW 14701, GMW 14864, GMW (Effect of Cleaners), GMW (Effect of Cleaners), GMW 14445, GMW 14334, GMW 15891; ISO ; Mack Truck 617GS120; Navistar CEMS GT-14A; Paccar CS0033 (9.23.2); Toyota: TSH1509G, TSH3130G, TSH1508G (2.1.1 and 2.1.2); Volvo STD Chip Resistance (Gravelometer) ASTM D3170; GMW (Methods B and C); SAE J400; Volvo STD Conductivity / ph ASTM E70; Navistar GT-18; Paccar CS0033 (9.24) Crockmeter Evaluation FLTM BN , FLTM BN ; ISO 20433; SAE J861 Environmental Cycles Chrysler LP-463PB-22-01; FLTM BQ ; Ford: WSS-M15J14-A (3.5.7), WSS-M15J15-A (3.5.7), WSS-M15J16-A (3.5.7), WSS-M2P188-A (3.4.8), WSS-M99J385-A (3.7.7); GMW 14124; Volvo STD Evaluation of Color Differences ASTM D2244; ISO 7724/3, 2, 1; JIS L0805 (A2LA Cert. No ) 07/20/2017 Page 2 of 4

3 Flexibility Resistance (Mandrel) ASTM D522; Ford WSS-M15J15-A (3.5.20); GM9503P; ISO 6860; Toyota TSH 1504G Fogging Resistance GMW 3235; SAE J1756; Toyota TSM 0503G Gloss ASTM D523; FLTM BI ; ISO 2813; JIS Z8741; Navistar CEMS GT-6B; Toyota TSH1519G; Volvo STD Hardness Evaluation ASTM D3363; FLTM BN ; GM9507P (Inactive 2011) 1 ; LP-463-DD-18-01; Navistar CEMS GT-4D; Toyota TSH 1539G Impact Resistance ASTM D2794, ASTM D3763 (-30 C to 0 C), ASTM D5420; FLTM BO ; ISO ; Toyota TSH 1504G (2.1) Mar Resistance Chrysler LP-463PB-54-01; FLTM BI ; GMN3943; GMW 14698; Navistar GT-12 Measurement of Dry Film Thickness ASTM D4138 (Method B) Migration Staining / Print Resistance / Soiling & Cleanability FLTM BN , FLTM BN ; GM9141P; Toyota TSH 3111G, Toyota TSH 1501G (2.1) Odor Evaluation / Mildew Growth FLTM BO , FLTM BO ; GMW 3205; SAE J1351 (A2LA Cert. No ) 07/20/2017 Page 3 of 4

4 Oven Aging / Heat Resistance GMW (Oven Age), GMW (Oven Age); Ford: WSS-M15J14-A (3.5.6), WSS-M15J15-A (3.5.6), WSSM-M15J16-A (3.5.6), WSS-M2P188-A (3.7), WSS-M99J385-A (3.7.6) Salt Fog (Spray) / Corrosion ASTM B117, ASTM G1; FLTM BI , FLTM BI ; GM4298P; SAE J2334 Water Fog / Humidity / Condensation Exposure ASTM D1735, ASTM D2247, ASTM D4585; GMW 14729; Navistar CEMS GT-7E; Toyota TSH 3130G (4.7) Water Immersion ASTM D870; FLTM BI ; ISO ; Navistar CEMS GT-7G; Toyota TSH1505G The laboratory is only accredited for the test methods listed above. The accredited test methods are used in determining compliance with the material specifications listed below. The inclusion of these material specifications on this Scope does not confer laboratory accreditation to the material specifications nor does it confer accreditation for the method(s) embedded within the specifications: Material Specifications Ford: WSS-M15J14-A, WSS-M15J15-A, WSS-M15J16-A, WSS-M2P188-A; Freightliner , ; GMW14867; Mack Truck 617GS120; Toyota TSH 3130G 1 This laboratory s Scope contains inactive, withdrawn or superseded methods. As a clarifier, this indicates that the applicable method itself has been withdrawn or is now considered historical and not that the laboratory s accreditation for the method has been withdrawn. (A2LA Cert. No ) 07/20/2017 Page 4 of 4

5 Accredited Laboratory A2LA has accredited SHERWIN-WILLIAMS AUTOMOTIVE FINISHES CORP. Warrensville Heights, OH for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009). Presented this 25 th day of May President and CEO For the Accreditation Council Certificate Number Valid to April 30, 2019 For the tests to which this accreditation applies, please refer to the laboratory s Mechanical Scope of Accreditation.