gloves Spirometers Nebulizer & Cannulae Restraint Devices Animal Handling Gloves Student Spirometer and Dry Gas Meter 2

Transcription

1 gloves EC Student Spirometer, see page 2 Products Page No. Spirometers Student Spirometer and Dry Gas Meter 2 Nebulizer & Cannulae Aerosol Nebulizer and Tracheal Cannulae 3 Restraint Devices Collars and Gloves 4 Animal Handling Gloves Gloves and Arm Guards 5 Gloves 6 Tracheal Cannulae, see page 3 Pillow Collars, see page 4 EC Triple-Strength Gloves, see page 5 1

2 spirometers Student Spirometer and Dry Gas Meter EC liter capacity 30 mm ID airways result in nearly 50% greater cross-sectional area than traditional 22 mm bore tubing A one-way air valve with mica disc construction minimizes resistance Counterweight minimizes weight of gas holder For use with the Transducer Interface and the Student Oscillograph, see Section I for more details Student Spirometer The ideal spirometer offers so little resistance to the movement of air to and from the subject s lungs that it does not affect the subject s respiratory movements. As a teaching device, this spirometer has a number of important extra features: Double channel air line valve for open/closed circuit work that connects subject to atmosphere while regulating his/her breathing and becoming accustomed to apparatus. When the valve is turned and the line is connected to the Spirometer, it is possible to determine the exact moment the test starts. 600 ml transparent canister can be placed in or out of circuit and can hold color-indicating absorbent. The Spirometer is equipped with a low inertia potentiometer which provides resistance changes as a function of volume changes. This transducer is activated by the movement of the bell and is powered by two 1-1/2 volt batteries supplied. The 300 mv signal produced is suitable for recording. The Spirometer housing is made of heavy plastic 6.5 mm (1/4 in) thick. It measures, H x W x D, 300 x 375 x 375 mm (12 x 15 x 15 in) overall. This Spirometer is supplied complete with tubing, mouthpiece, nose clip and a battery powered transducer with cable. It is also supplied with three cartridge pens and a pen arm for kymograph recording. EC Student Spirometer 2, EC Color-Indicating CO 2 Absorbent, kg (6.5 lb), 5 to 10 mesh EC Disposable Cartridge Pens, pkg. of EC Spare Pen Arm EC Replacement Transducer Cable, miniature stereo jack to 7-pin Binder; for direct connection of Spirometer s transducer to EC Transducer Interface Dry Gas Meter Ideal for measuring the volume of expired gases collected in Douglas Bags or the volume of gases drawn through a system Dry Gas Meter This industrial Meter has been adapted for experimental use. It is a diaphragm-type, positive displacement Meter that is accurate to ±1.5%. The inlet and outlet tubing connections fit the two most frequently selected hose sizes for gas equipment. Hoses with a nominal bore of 22 mm fit directly onto the first step of the connectors. A tapered fitting accepts the 30 mm airway systems with such equipment as Harvard Apparatus Douglas Bags. An optically-coupled detector drives a 4-digit LED display in cumulative 0.1 liter increments from 0.1 to liters maximum with an electrical zero reset. A 2.5 mm output socket produces a TTL compatible, 5 V pulse with each 0.1 liter increment. This Meter is portable. It measures, H x W x D, 30 x 20 x 17.5 cm (12 x 8 x 7 in), weighs 4 kg (9 lb) and operates on one 9 V transistor battery (included). EC Dry Gas Meter, 115 V 2, EC Dry Gas Meter, 230 V 2, EC Dry Gas Meter, 220 V 2,

3 nebulizers & cannulae Aerosol Nebulizer and Tracheal Cannulae EC Aerosol Nebulizer Low particle sizes (100% of the particles are below 10 µm) No solution warming required Recommended for nebulizing drugs sensitive to ultrasonics Aerosol is automatically transported by compressed air Tracheal Cannulae This Aerosol Nebulizer is used to delivery nebulized substances to an animal or chamber. It requires an operating pressure of approximately 1.5 bar (22 psi) from a compressed air source. All of the particles generated by the Nebulizer are 10 µm or less in size with 60% of the particles being 2.5 µm or less. The data presented below in the bar graph and table list particle sizes obtained when 5 ml of a 0.9% saline solution was nebulized with a gas inlet pressure of 1.5 bar. A special connecting block is required to attach the Nebulizer to the HA-HSE single/double chamber plethysmograph or mouse plethysmograph. The Nebulizer can be also used with the MiniVent or MicroVent using the Multi- Gas Inlet Adapter EC Lastly, the Nebulizer can also be used with a chamber/box. This version EC includes the Nebulizer, stand, tubing, exhaust tubing and EC Tubing Connection Kit. Size Micron Below Band in Micron % in Band to to to to to to to to to to to EC Aerosol Nebulizer EC Aerosol Nebulizer with Multi-Gas Adapter Kit 2, for Chamber/Box Use* EC Multi-Gas Inlet Adapter for MiniVent and 1, MicroVent EC Tubing Connection Kit for Aerosol Nebulizer *Note: To use this kit with a Ventilator, the EC Connection Kit is required. Tracheal Cannulae A tracheal cannula is used in a tracheotomy and is a means of connecting an animal to a ventilator. This Vee form tracheal cannula is normally preferred because it minimizes air/gas dead space. This tracheal cannula consists of two parts which are offered separately: a cannula vee and a cannula nozzle. The cannula vee is offered in two sizes, small and large, depending on the animal species to be ventilated. The nozzles are available in various sizes. They screw onto the vee, and a neoprene O-ring seals the joint. For tracheal cannula selection there are two basic considerations: The outside diameter of the cannula vee must approximately match the outside diameter of the ports of the ventilator to ensure a tight fit of the tubing The outside diameter of the nozzle of the cannula must ensure a tight fit to the inside diameter of the animal s trachea. For the inside diameters of tracheas of various animals. These tracheal cannulae are constructed of heavily nickel-plated brass. The cannula vees and cannula nozzles must be ordered separately. EC Small Cannula Vee, 6.5 mm OD EC Large Cannula Vee, 16 mm OD EC Small Cannula Nozzle, 2 mm OD* EC Small Cannula Nozzle, 3 mm OD* EC Small Cannula Nozzle, 4 mm OD* EC Small Cannula Nozzle, 5 mm OD* EC Small Cannula Nozzle, 6 mm OD* EC Large Cannula Nozzle, 6 mm OD** EC Large Cannula Nozzle, 8 mm OD** EC Large Cannula Nozzle, 11 mm OD** EC Large Cannula Nozzle, 14 mm OD** *Note: For use with EC **Note: For use with EC

4 restraint devices Collars and Gloves EC Bite Not Collar for Cats More comfortable than Elizabethan collars Less restrictive to the animal s natural behavior so animal stays calmer Cervical Collars for Cats and Dogs For canines and cats Similar in function to Elizabethan Collars but more effective for housing space Cervical Collars Bite Not Collars Introducing the first alternative to the Elizabethan collar that s a comfort to wear. These new Bite Not Collars are a revolutionary product that allow dogs and cats to eat, drink, sleep and play, comfortably. Peripheral vision in unimpeded so dogs and cats are calmer and happier. The Bite Not Collar wraps snugly around the animal s neck and should be wide enough to extend from behind the ear to the top of the shoulder. These collars protect the back, rump, base of the tail, flanks, chest, abdomen, genitals and even the feet (not recommended for protecting the eyes or ears). They are made of flexible, polyethylene plastic covered in foam on one side for comfort and to prevent slippage. They are secured by Velcro strips along the edges and have an elastic wraparound strap. Bite Not Collar Collar Weight Collar, Order # Size of Animal W x L Price $ EC Dog, size 1 Under 10 lbs 3.5 x 16 in EC Dog, size 2 10 to 17 lbs 4 x 18 in EC Dog, size 3 18 to 30 lbs 5 x 21 in EC Dog, size 3 31 to 45 lbs 5 x 24 in EC Dog, size 4 46 to 70 lbs 6 x 27 in EC Dog, size 5 71 to 100 lbs 7 x 28 in EC Dog, size to 140 lbs 8 x 32 in EC Cat, size sm under 10 lbs 2.5 x 14 in EC Cat, size lg over 10 lbs 3 x 15 in * Note: The bottom of the collar must touch the animal s shoulder joint for maximum protection. For proper sizing measure from the back of the ear to the shoulder joint and select the collar with a corresponding width. Pillow Collars These Cervical Collars restrict the movement of the animal s head from side-to-side while permitting downward motion for feeding. These pliable Collars are made from low density polyethylene with light padding around the edges to soften the contours. Available with a choice of widths to accommodate different neck heights. The Velcro strip provides continuous adjustment to securely fit the neck. Cervical Collar Animal Collar Size Width Circumference * Price $ Canines EC Sm (3-1/4 in) 8.25 cm (12-1/2 in) 31.8 cm EC Med (3-3/4 in) 9.5 cm (14 in) 35.6 cm EC Lg (5 in) 12.7 cm (15 in) 38.1 cm Cats EC Sm (1-1/4 in) 3.2 cm (5 in) 12.7 cm EC Med (1-1/2 in) 3.8 cm (5-1/2 in) 14.0 cm EC Lg (1-3/4 in) 4.4 cm (6 in) 15.2 cm * Note: Other Collar circumferences available upon request. Polyamid Blend Glove Polyamid Blend Small Animal Handling Gloves Spun ceramic provides extra protection from slashing and tearing Elastic wrist band allows for an accurate, comfortable and safe fit. Pillow Collars These Pillow Collars are designed for a wide range of applications in both dogs and rabbits. They are manufactured from an extremely durable ballistic canvas fabric with a foam pillow inside the casing. These Collars are available for use with dogs and rabbits in either black or white. For complete details and ordering information see Delivery and Sampling page 22. These Small Animal Handling Gloves are a unique and innovative integration of comfort and technology. Spun ceramic material offers three times more slash resistance than Kevlar. These gloves are designed and fabricated for flexibility, accurate touch control, comfort and safety during long periods of wear. They are light weight yet strong and comfortable to safeguard personnel while handling animals. EC Polyamid Blend Glove, Small Pair EC Polyamid Blend Glove, Large Pair

5 animal handling gloves Gloves and Arm Guards EC Triple-Strength Gloves Improved cut resistance Comfortable and lightweight Unmatched durability Not puncture proof Triple-Strength Gloves These Gloves provide excellent protection, less weight and greater dexterity. They are seamless and are knit from a yarn that has a central core of stainless steel wire covered in Kevlar (the material used in bullet proof vests). An additional layer of Spectra nylon increases strength, comfort and durability, while decreasing skin chafing. They are not puncture proof, but are highly cut-resistant. They are machine washable. These five-finger Gloves have a snug, 7.5 cm (3 in) cuff for protection. They are offered in three sizes and are sold in pairs. Wear these gloves over a pair of leather gloves for the utmost protection. EC Triple-Strength Gloves, Small, Pair EC Triple-Strength Gloves, Medium, Pair EC Triple-Strength Gloves, Large, Pair Stainless Steel Mesh Gloves Secure fit with full mobility; autoclavable Cut proof Puncture proof to 1/8 inch Stainless Steel Mesh Gloves These five-finger Stainless Steel Mesh Gloves offer protection against animal bites and knife cuts. Sharp teeth longer than 3.2 mm (1/8 in) will penetrate the Glove. Constructed from individually welded stainless steel links, these Gloves are extremely rugged and durable while allowing full mobility of the hand and wrist. The Gloves are secured by quick-releasing velcro straps. These straps can be removed for autoclaving, or the entire Glove may be cleansed with soap and water. These Gloves are offered in two styles. The first style has a single velcro strap at the wrist. The second style has an additional velcro strap and a 6.5 cm (2-1/2 in) safety cuff for added wrist protection. Both styles are available in left- and right-handed versions and in men s and women s sizes. They are sold individually. Stainless Steel Mesh Glove Glove Size Glove Style Small Price $ Medium Price $ Large Price $ Without Safety Cuff Men s Right Hand EC EC EC Men s Left Hand EC EC EC Women s Right Hand EC EC EC Women s Left Hand EC EC EC With Safety Cuff Men s Right Hand EC EC EC Men s Left Hand EC EC EC Women s Right Hand EC EC EC Women s Left Hand EC EC EC

6 animal handling gloves Gloves Deerskin Gloves Leather Gloves with Kevlar Lining Deerskin leather, thin yet strong and durable Lined with Kevlar for slash resistance Adjustable Velcro wrist strap Soft and form fitting will not crack or harden after wetting Small Animal Handling Deerskin Gloves These Small Animal Handling Deerskin Gloves offer a smart solution for protection during long periods of wear. When handling small animals, dexterity coupled with protection is vital for the security of both the subject and handler. Manufactured from a soft yet durable deerskin, these gloves are adjustable for a secure and comfortable fit and lined with knitted Kevlar to provide extra protection and slash resistance. EC Deerskin Gloves, Small Pair EC Deerskin Gloves, Medium Pair EC Deerskin Gloves, Large Pair EC Deerskin Gloves, X-Large Pair Largest range of sizes of animal handling gloves Kevlar lining provides unparalleled protection against punctures Primate Handling Leather Gloves with Kevlar Lining These 100% full grain cowhide Gloves have split grain cuffs that are 25.5 cm (10 in) long. These rugged Gloves are available in five sizes either with or without the Kevlar lining. They are provided in pairs. Full grain leather Snap- On Over Gloves are available separately and easily attach to the glove via sturdy snaps. These Over Gloves provide a second layer of leather over the thumb and index finger for additional protection when working with primates. With Without Snap-On Glove Size Kevlar Lining $ Kevlar Lining $ Over Glove $ Small EC EC EC Medium EC EC EC Large EC EC EC X-Large EC EC EC XX-Large EC EC EC