SlimLine Product Catalog & Manual 1. Unit:mm, Scale 1: 1.5 / mm. SlimLine. Product Catalog / Manual

Transcription

1 SlimLine Product Catalog & Manual 1 Unit:mm, Scale 1: 1.5 / mm SlimLine Product Catalog / Manual

2 2 SlimLine Product Catalog & Manual Unit:mm, Scale 1: 1.5 / mm

3 Contents Introduction S.L.A. Surface 04 SlimLine Characteristics 06 SlimLine Fixture 08 Prosthetic Procedure 10 Denture Components 11 Dual Abutment (Fix Type) 12 Angled Abutment (Fix Type) 13 Abutment Level Impression Components 14 Instruments Surgical Kit 15 Drill 16 Instrument 16 Surgical Manual Surgical Drill Sequence 18 Surgical Process 19 Prosthesis Manual Prosthetic Process 20 Prosthetic Manual 21 Prosthetic Manual - Indirect 22 Prosthetic Manual - Direct 23

4 04 SlimLine Product Catalog & Manual In vivo test

5 SlimLine Product Catalog & Manual 05 S.L.A. Surface S.L.A. (Sandblasting with large grit and acid etching) Higher bone-to-implant contact. Faster bone formation on the surface. Human osteoblast Well attached and proliferated human osteoblasts. 1250X 3000X

6 06 SlimLine Product Catalog & Manual SlimLine Characteristics Unit: mm One Body Design S.L.A. surface enables immediate or early loading Mini ball (Ø1.8) & metal socket make denture production easy Wide range of choice for prosthetic options Mini Ball Type Fix Type Ø2.65 Ø2.8 Ø G/H G/H IBS IUS283010

7 SlimLine Product Catalog & Manual 07 SlimLine Characteristics Unit: mm Denture System Mini O-Ring Retention Force Ø4.05 Ø (BFS3) (300~500gf) (BFS2) (500~700gf) Mini O-ring Mini ball size (Ø1.8) Mini o-ring type denture socket Minimal-size denture socket Mini o-ring are replaceable Angled Abutment Selecting direction is easy due to the Octa 45 rotation angles. IUA IUA Slanted implanting is possible with the combination of angled abutment (15, 25 ). Cement the final restoration onto the abutment. Tilting Angle Double-threaded Design Increased thread height helps strengthen the initial stability Up to ±15 degrees of tilting angles to accommodate the pathway of the implant. Double threading helps decrease the chair time of implantation.

8 08 SlimLine Product Catalog & Manual Mini Ball Type Fixture Unit: mm, Scale 1 : 1 / mm Body Ø2.3 Ø2.8 L 06 IBS Ø IBS IBS L 12 IBS IBS Ø2.3 Body Ø2.8 Ø2.8 L 06 IBS Ø IBS IBS L 12 IBS IBS Ø2.8 Body Ø3.3 Ø2.8 L 06 IBS Ø IBS IBS L 12 IBS IBS Ø3.3

9 SlimLine Product Catalog & Manual 09 Fix Type Fixture Unit: mm, Scale 1 : 1 / mm Body Ø2.3 Ø2.65 L 06 IUS IUS IUS IUS L 14 IUS Ø2.3 Body Ø2.8 Ø2.65 L 06 IUS IUS IUS IUS L 14 IUS Ø2.8 Body Ø3.3 Ø2.65 L 06 IUS IUS IUS IUS L 14 IUS Ø3.3

10 10 SlimLine Product Catalog & Manual Prosthetic Procedure Impression Technique and Restoration Selection Mini Ball Type Ø2.3 / Ø2.8 /Ø3.3 Page 08 Fix Type Ø2.3 / Ø2.8 / Ø3.3 Page 09 Impression Coping Ø3.8 Page 11 Impression Coping Ø3.8 Page 11 Analog Page 11 Analog Page 11 Socket Spacer Page 11 Dual Abutment Ø3.5 / Ø4.5 Page 12 Angled Abutment 15 / 25 Page 13 Denture Socket 300~500gf / 500~700gf Ø4.05 / Ø4.85 Page 11 Mini O-ring Page 11

11 SlimLine Product Catalog & Manual 11 Denture Components Unit: mm, Scale 1 : 1.5 / mm Comfort Cap Ø2.9 ICC 5.5 Impression Coping Ø3.8 ICA 7.5 Analog IANF Ball Type Fix Type Socket Spacer BIC3L 4.3 Female Socket Denture Socket + O-ring Ø4.05 BPF3 (300~500gf) BPF2 (500~700gf) (300~500gf) (BFS3) 2.9 (BNO1) Ø4.85 (500~700gf) 3.3 (BFS2) (BNO2)

12 12 SlimLine Product Catalog & Manual Dual Abutment [Fix Type] Unit: mm, Scale 1 : 1.5 / mm Ø G/H 3.0 IUDA3520 and IUS Diameter Ø3.5 G/H H IUDA IUDA IUDA Ø3.5 Ø3.5 Ø G/H 3.0 Diameter Ø4.5 G/H H IUDA IUDA IUDA Ø4.5 Ø4.5 Ø G/H 3.0

13 SlimLine Product Catalog & Manual 13 Angled Abutment [Fix Type] Unit: mm, Scale 1 : 1.5 / mm IUA and IUS Angled 15 IUA IUA

14 14 SlimLine Product Catalog & Manual Abutment Level Impression Components Fix Type Fixture Unit:mm, Scale 1: 1.5 / mm Comfort Cap Ø3.0 FCC 7.3 Comfort Cap Ø4.5 CCC45C 6.8 Impression Coping Ø4.5 CIC45L 10.4 Lab Analog Ø CAN45LL 12.0 Burn-out Cylinder Ø4.5 Ø4.5 Type Single Bridge CBC45SL CBC45BL 12.8

15 SlimLine Product Catalog & Manual 15 Surgical Kit SlimLine Surgical Kit XSLS Kit includes XFDS XFDS XFDS XPP XPP IPST 25 H IPST 25 W XPP XPP XHDHT XDE XRCA1

16 16 SlimLine Product Catalog & Manual Drill / Instrument Unit: mm, Scale 1 : 1 / mm Final Drill Diameter L Ø XFDS Ø XFDS Ø XFDS Ø1.75 Ø2.35 Ø2.90 Implant Driver Type Hand-piece Ratchet IPST 25 H IPST 25 W 25 Driver Type Manual XHDHT Ø12 Parallel Pin XPP Drill Extension XDE 26 Ratchet XRCA1 75

17 SlimLine Product Catalog & Manual 17 Manual Surgical Manual Prosthesis Manual

18 18 SlimLine Product Catalog & Manual Surgical Drill Sequence Drilling Sequence Guide. Final Drill: 1,000rpm / 30~45N. cm Final Drill (1.75) Final Drill (2.35) Final Drill (2.90) Body Ø2.3 Body Ø2.8 Body Ø3.3

19 SlimLine Product Catalog & Manual 19 Surgical Process Implantation Process: By hand-piece By ratchet Use the cap to start the implantation of the fixture. When the linkage between the cap and fixture deforms after reaching 5N cm of tightening force, remove the disengaged cap and continue implantation using the MF tool in the surgical kit. Please make sure that the fixture and the implant driver are engaged completely before loading. Implant driver Complete engagement Incomplete engagement

20 20 SlimLine Product Catalog & Manual Prosthetic Process Fix Type Angled Abutment Cementation:

21 SlimLine Product Catalog & Manual 21 Prosthetic Manual Ball Type Fixture Chairside SlimLine mini ball type ixture. Fixture installation. Produce the individual tray for denture impression Aix the impression coping on the mini ball type ixture. Apply the impression material. Take the inal impression with the prepared individual tray. Remove the tray from the patient's mouth. Image of the set inal impression (with impression coping). Ball analog Lab Side Insert analogs into the coping embedded in impression. Create the master model.

22 22 SlimLine Product Catalog & Manual Prosthetic Manual - Indirect Indirect Lab Side Socket spacer. Fabrication of the denture with conventional method. Secure spaces for the female sockets. Assemble the female sockets onto the ball analogs that are embedded in the master model. Apply the resin to the secured area. Position the denture on the master model and wait for it to set completely. Chairside Female sockets are placed in the denture. Polish the denture. Denture delivery.

23 SlimLine Product Catalog & Manual 23 Prosthetic Manual - Direct Direct Lab Side Socket spacer. Fabrication of the denture with conventional method. Secure spaces for the female sockets. Chairside Connect the female sockets to the Mini Ball Abutments in the intraoral. Apply the resin to the secured area. Position the denture in the intraoral and wait for it to set completely. Female sockets are placed in the denture. Polish the denture.

24

25

26

27 SlimLine Product Catalog & Manual 27 Unit:mm, Scale 1: 1.5 / mm Copyright March, 2015 DENTIUM

28 SlimLine Product Catalog / Manual Specifications are subject to change without notice. Some products listed in this catalog are not available in the market due to pending approval. HEAD OFFICE 504 Gyeonggi R&DB Center, 105 Gwanggyo-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea [ ] T F biz_mail@dentium.com / SPMC-1503 [Rev.1]