rainbow Lab System Block Coloring Guide
|
|
- Alan Webb
- 6 years ago
- Views:
Transcription
1 Lab System Block Coloring Guide
2
3 Lab System Block Coloring Indications Coloring Process rainbow High Shine Block rainbow Shine Block rainbow Shade Block rainbow Brushing Liquid Sintering Schedule Transmittance & Strength Test
4
5 Lab System Dentium has embarked in developing lab products to deliver those desired outcomes. Dentium has created its own zirconia block in various shades and flexural strengths to reproduce as closely as possible, the natural human tooth. Dentium has gone even further by developing solutions and substances to provide users the control over the aesthetics in implant restorations. Dentium is one of the very few dental implant companies worldwide with such sophisticated line of dental lab products. 5
6 Indications rainbow Block Indications Case Full-Contour Single Crowns Full-Contour Bridge Single Crown Frameworks Bridge Frameworks Inlay Onlay Veneer Block High Shine Shine Shade LS Block LS Pressing 6
7 Coloring Process Shine Block Dipping 20 seconds STEP 2 Remove the dipping solution (Using tissue) STEP 3 Drying 15 mins / 110 C, (Depends on the condition) 7
8 Coloring Process Shine Block After dipping (20 seconds) Dip A0.5 Dip A1 Dip A2 Dip A3 Dip A4 After drying (15 mins / 110 C, Depends on the conditions) Dip A0.5 Dip A1 Dip A2 Dip A3 Dip A4 8
9 High Shine A0 High Shine A0 A1 A2 A3 A3.5 A4 Dipping (20s) Dip A1 Dip A1 Dip A2 Dip A2 Dip A2 Cervical inner side Orange Brown Brown Brown Step 1 Dip A2(x1) Dip A2(x1) Dip A2(x1) Dip A2(x1) D-Brown(x2) Step 2 Dip A2(x1) Dip A2(x1) Brown(x2) Dip A2(x1) Brown(x1) Step 3 Brown(x2) D-Brown(x1) Sintering * Dark Brown = Brown x 3 9
10 High Shine A0-A1 High Shine Block A0 Dip A1 (20s) After Drying (15 mins / 110 C, Depends on the conditions) Occlusal ~ Cervical Dip A2 STEP 2 Cervical Dip A2 10
11 High Shine A0-A2 Or High Shine Block A0 Dip A1 (20s) After Drying (15 mins / 110 C Depends on the conditions) Cervical Inner Side Incisal ~ Middle Dip A2 STEP 2 Middle Dip A2 STEP 3 Cervical Brown Brushing 2 times 11
12 High Shine A0-A3 Br High Shine Block A0 Dip 2 (20s) After Drying (15 mins / 110 C Depends on the conditions) Cervical Inner Side Middle ~ Cervical Dip A2 s STEP 2 Cervical Brown Brushing 2 times 12
13 High Shine A0-A3.5 Br High Shine Block A0 Dip 2 (20s) After Drying (15 mins / 110 C Depends on the conditions) Cervical Inner Side Incisal ~ Middle Dip A2 STEP 2 Middle Dip A2 STEP 3 Cervical D-Brown 13
14 High Shine A0-A4 Br High Shine Block A0 Dip 2 (20s) After Drying (15 mins / 110 C Depends on the conditions) Cervical Inner Side Incisal ~ Cervical D-Brown Brushing 2 times STEP 2 Middle ~ Cervical Brown 14
15 High Shine A1 High Shine A1 A1 A2 A3 A3.5 A4 Dipping (20s) Dip A0.5 Dip A1 Dip A2 Dip A2 Cervical inner side Orange Brown Brown D-Brown Step 1 Dip A2(x1) Dip A3(x1) Dip A3(x1) Dip A3(x1) D-Brown(x1) Step 2 Dip A3(x1) Brown(x1) Step 3 Brown(x1) Sintering * Dark Brown = Brown x 3 15
16 High Shine A1-A1 High Shine Block A1 Middle ~ Cervical Dip A2 16
17 High Shine A1-A2 Or High Shine Block A1 Dip 0.5 (20s) After Drying (15 mins / 110 C Depends on the conditions) Cervical Inner Side Middle ~ Cervical Dip A3 17
18 High Shine A1-A3 Br High Shine Block A1 Dip 1 (20s) After Drying (15 mins / 110 C Depends on the conditions) Cervical Inner Side Middle ~ Cervical Dip A3 STEP 2 Cervical Dip A3 STEP 3 Cervical Brown 18
19 High Shine A1-A3.5 Br High Shine Block A1 Dip 2 (20s) After Drying (15 mins / 110 C Depends on the conditions) Cervical Inner Side Middle ~ Cervical Dip A3 19
20 High Shine A1-A4 D-Br High Shine Block A1 Dip 3 (20s) After Drying (15 mins / 110 C Depends on the conditions) Cervical Inner Side Middle ~ Cervical D-Brown STEP 2 Cervical Brown 20
21 High Shine A2 High Shine A2 A1 A2 A3 A3.5 A4 Dipping (20s) Dip A0.5 Dip A0.5 Dip A2 Dip A2 Cervical inner side Orange Brown D-Brown D-Brown Step 1 Dip A3(x1) Dip A3(x1) Dip A3(x1) Dip A3(x2) Brown(x2) Step 2 Dip A3(x1) Brown(x1) Brown(x1) Step 3 Brown(x1) Sintering * Dark Brown = Brown x 3 21
22 High Shine A2-A1 High Shine Block A2 Middle ~ Cervical Dip A3 22
23 High Shine A2-A2 Or High Shine Block A2 Dip 0.5 (20s) After Drying (15 mins / 110 C Depends on the conditions) Cervical Inner Side Middle ~ Cervical Dip A3 23
24 High Shine A2-A3 Br High Shine Block A2 Dip 0.5 (20s) After Drying (15 mins / 110 C Depends on the conditions) Cervical Inner Side Middle ~ Cervical Dip A3 STEP 2 Cervical Dip A3 STEP 3 Cervical Brown 24
25 High Shine A2-A3.5 D-Br High Shine Block A2 Dip 2 (20s) After Drying (15 mins / 110 C Depends on the conditions) Cervical Inner Side Middle ~ Cervical Dip A3 Brushing 2 times STEP 2 Cervical Brown 25
26 High Shine A2-A4 D-Br High Shine Block A2 Dip 2 (20s) After Drying (15 mins / 110 C Depends on the conditions) Cervical Inner Side Middle ~ Cervical Brown Brushing 2 times STEP 2 Cervical Brown 26
27 Shine A0 Shine A0 A1 A2 A3 A3.5 A4 Dipping (20s) Dip A1 Dip A1 Dip A2 Dip A3 Dip A3 Cervical inner side Orange Brown D-Brown D-Brown Step 1 Dip A3(x1) Dip A3(x1) Dip A3(x1) Dip A3(x1) D-Brown(x1) Step 2 Orange(x1) Dip A3(x1) Dip A3(x1) Dip A3(x1) Brown(x1) Step 3 Brown(x1) Brown(x1) Sintering * Dark Brown = Brown x 3 27
28 Shine A0-A1 Shine Block A0 Dip 1 (20s) After Drying (15 mins / 110 C Depends on the conditions) Middle ~ Cervical Dip A3 STEP 2 Cervical Orange 28
29 Shine A0-A2 Or Shine Block A0 Dip 1 (20s) After Drying (15 mins / 110 C Depends on the conditions) Cervical Inner Side Incisal ~ Cervical Dip A3 STEP 2 Cervical Dip A3 29
30 Shine A0-A3 Br Shine Block A0 Dip 2 (20s) After Drying (15 mins / 110 C Depends on the conditions) Cervical Inner Side Middle ~ Cervical Dip A3 STEP 2 Cervical Dip A3 30
31 Shine A0-A3.5 Shine Block A0 Dip 3 (20s) After Drying (15 mins / 110 C Depends on the conditions) Cervical Inner Side D-Br Incisal ~ Cervical Dip A3 STEP 2 Middle ~ Cervical Dip A3 STEP 3 Cervical Brown 31
32 Shine A0-A4 Shine Block A0 Dip 3 (20s) After Drying (15 mins / 110 C Depends on the conditions) Cervical Inner Side D-Br Cervical D-Brown STEP 2 Incisal Brown STEP 3 Middle Brown s 32
33 Shine A1 Shine A1 A1 A2 A3 A3.5 A4 Dipping (20s) Dip A0.5 Dip A1 Dip A2 Dip A2 Cervical inner side Orange Brown Brown Brown D-Brown Step 1 Dip A2(x1) Dip A3(x1) Dip A3(x1) Dip A3(x2) Dip A3(x1) Step 2 Orange(x1) Dip A3(x1) Brown(x1) D-Brown(x1) Step 3 Orange(x1) Sintering * Dark Brown = Brown x 3 33
34 Shine A1-A1 Or Shine Block A1 Cervical Inner Side Incisal ~ Cervical Dip A2 STEP 2 Cervical Orange 34
35 Shine A1-A2 Br Shine Block A1 Dip 0.5 (20s) After Drying (15 mins / 110 C Depends on the conditions) Cervical Inner Side Incisal ~ Cervical Dip A3 STEP 2 Middle ~ Cervical Dip A3 STEP 3 Cervical Orange 35
36 Shine A1-A3 Br Shine Block A1 Dip 1 (20s) After Drying (15 mins / 110 C Depends on the conditions) Cervical Inner Side Middle ~ Cervical Dip A3 STEP 2 Cervical Brown 36
37 Shine A1-A3.5 Br Shine Block A1 Dip 2 (20s) After Drying (15 mins / 110 C Depends on the conditions) Cervical Inner Side Middle ~ Cervical Dip A3 Brushing 2 time 37
38 Shine A1-A4 D-Br Shine Block A1 Dip 2 (20s) After Drying (15 mins / 110 C Depends on the conditions) Cervical Inner Side Middle ~ Cervical Dip A3 STEP 2 Cervical D-Brown 38
39 Shine A2 Shine A2 A1 A2 A3 A3.5 A4 Dipping (20s) Brown D-Brown D-Brown Cervical inner side Orange(x1) Orange(x2) Orange(x2) D-Brown(x1) Step 1 Brown(x1) Brown(x1) Brown(x1) D-Brown(x1) Step 2 Brown(x1) Brown(x1) Step 3 D-Brown(x1) Sintering * Dark Brown = Brown x 3 39
40 Shine A2-A2 Shine Block A2 Middle Orange STEP 2 Cervical Brown 40
41 Shine A2-A3 Br Shine Block A2 Cervical Inner Side Middle ~ Cervical Orange Brushing 2 times STEP 2 Cervical Brown 41
42 Shine A2-A3.5 D-Br Shine Block A2 Cervical Inner Side STEP 2 STEP 3 STEP 4 Incisal ~ Cervical Orange Brushing 2 times Incisal ~ Middle Brown Middle Brown Cervical D-Brown 42
43 Shine A2-A4 D-Br Shine Block A2 Cervical Inner Side Incisal l ~ Cervical D-Brown STEP 2 Middle ~ Cervical D-Brown STEP 3 Middle ~ Cervical Brown 43
44 Shade Shade 0.5 Shade 2 Shade A0.5 A2 A3 A3.5 A4 Step 1 Dip A2(x1) Dip A2(x1) Dip A3(x1) Dip A2(x1) Step 2 Dip A2(x1) Dip A3(x1) Dip A3(x2) Step 3 D-Brown(x1) Sintering * Dark Brown = Brown x 3 44
45 Shade A0.5 Shade Block A0.5 Middle ~ Cervical Dip A2 STEP 2 Cervical Dip A2 45
46 Shade A3 Shade Block A2 Middle ~ Cervical Dip A2 46
47 Shade A3.5 Shade Block A2 Middle ~ Cervical Dip A3 s STEP 2 Cervical Dip A3 47
48 Shade A4 Shade Block A2 Occlusal Dip A2 STEP 2 Middle Dip A3 Brushing 2 times STEP 3 Cervical D-Brown s 48
49 Color chart Type Color Art. No. Brushing Liquid-B Brushing Liquid-O Brushing Liquid-W Brushing Liquid-G Brushing Liquid-P Brushing Liquid-V Bottle 11 Brushing Liquid-BL Brushing Liquid-DG Brushing Liquid-DB Brushing Liquid-GV Brushing Liquid-WO Pen 6 Brushing Pen-B Brushing Pen-G Brushing Pen-O Brushing Pen-P Brushing Pen-W Brushing Pen-V 49
50 Anterior process Gray Blue Violet White Orange Brown Incisal 1/3 ridge Incisal 1/3 translucent Incisal 1/3 Marginal ridge white spot Cervical 1/3 Cervical 50
51 Posterior process Orange Brown Gray Violet White Groove Cervical Cusp, Marginal ridge Cusp Cusp tip, Ridge crest 51
52 Anterior process Incisal 1/3 ridge Incisal 1/3 translucent Incisal 1/3 Solution type brush Solution type brush Solution type brush 52
53 Anterior process Marginal ridge white spot Cervical 1/3 Cervical Solution type brush Solution type brush Solution type brush 53
54 Posterior process (Solution type brush) Groove - Orange Cervical - Brown Cusp, Marginal ridge - Grey Solution type brush Solution type brush Solution type brush 54
55 Posterior process (Solution type brush) Cusp - Violet Cusp tip, Ridge crest - White Solution type brush Solution type brush 55
56 Posterior process (Pen type brush) Groove - Orange Cervical - Brown Cusp, Marginal ridge - Grey Pen type Pen type Pen type 56
57 Posterior process (Pen type brush) Cusp - Violet Cusp tip, Ridge crest - White Pen type Pen type 57
58 Sintering Schedule Temp. Temp C ~1550 C 5 C/min 2hrs 1500 C ~1550 C 4 C/min 2hrs 980 C 980 C 5 C/min 8 C/min 5 C/min 3 C/min 200 C Air 200 C Cooling Air Cooling 0 2hrs 3hrs 5hrs 10hrs Time 0 3min 47min 47min 47min 3hrs 16min 5hrs 26min 7hrs 26min 14hrs 40min Time Standard (< 5 unit bridge) Long bridge ( 5 unit bridge) * This sintering schedules apply all kinds of rainbow blocks. Dip A3 : dipping solution Dip A3, Brown : Brushing Liquid-B - Clean the remaining liquid and dry the crown downward itself. - To acheive exact color, brush the crown after dry until 90 C in the sintering machine. 58
59 59
60 Lab System Block Coloring Guide HEAD OFFICE 501 Gyeonggi R&DB Center, 105 Gwanggyo-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea [ ] Tel Fax MANUFACTURER 1F, Gyeonggi R&DB Center / 226, 2F, GSBC, 105 Gwanggyo-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea Tel Fax Specifications are subject to change without any notice. Some products listed in this catalog may not be available in the market due to pending approval. RDLS-1612 [Rev.2]
Dentium Workflow Solution for Labs
lab system 2 Dentium Workflow Solution for Labs Contents Dentium Lab Products Publishing information Dec. 2016, Vol. 1 Publisher Head office 501 Gyeonggi R&DB Center, 105 Gwanggyo-ro, Yeongtong-gu, Suwon-si,
More informationInstructions for use Dental Direkt Color Solutions: DD Basic Shade, DD Art Elements, DD Pro Shade Z & DD Pro Shade C
_ As we are continually developing our products, we reserve the right to change them at any time. The latest digital version of these instructions for use can be found on our homepage at www.dentaldirekt.de
More informationUTML Ultra Translucent Multi-Layered STML Super Translucent Multi-Layered ML Multi-Layered HTHigh-Translucent TECHNICAL GUIDE
Ultra Translucent Multi-Layered STML Super Translucent Multi-Layered ML Multi-Layered HTHigh-Translucent TECHNICAL GUIDE High Esthetic Potential for Zirconia Dental Restorations * New series which features
More informationTechnical Instructions
Technical Instructions Screening Porcelain is to be used in combination with Noritake Super Porcelain EX-3 to make all-ceramic restorations, porcelain laminate veneers and jacket crowns as well as porcelain
More informationDigital Dentistry Solution
Digital Dentistry Solution Digital Dentistry Solution 02 Digital Dentistry Solution CAD/CAM System Optimized for glass ceramic High speed and steady quality in milling Simple and elegant design Bar, Disk
More informationTECHNICAL GUIDE KATANA ZIRCONIA MULTI-LAYERED SERIES
TECHNICAL GUIDE KATANA ZIRCONIA MULTI-LAYERED SERIES HIGH ESTHETIC WITH KATANA ZIRCONIA* New series which features translucency similar to natural tooth enamel is now available. Introducing the new series
More informationThe key to exceptional craft lies in exceptional materials.
Advanced digital materials for superior results. B 16ZX4822_Zirlux Brochure_Cover.indd 2 1/26/16 3:54 PM Today s dental laboratory is faced with a variety of challenges when selecting materials to incorporate
More informationICE ZIRCONIA CERAMIC. The Love of Perfection ENGLISH
ICE ZIRCONIA CERAMIC The Love of Perfection ENGLISH The Love of Perfection Copying nature to perfection is always an exciting challenge. The ingredients for success are talent, tireless effort and personal
More informationDirections For Use. Zirconia. Minimum occlusal wall thickness: 0.5 mm, including a 0.1 mm reserve for occlusal adjustment
Zirconia ht Minimum occlusal wall thickness: 0.5 mm, including a 0.1 mm reserve for occlusal adjustment Conservative circular preparation, minimum wall thickness 0.4 mm Marginal region, minimum wall thickness
More informationPowerful, Affordable 3D Printers for Professionals
Wright products, Wright quality, at the right price Valid September - November 2017 Powerful, Affordable 3D Printers for Professionals Form 2 Complete Package The most advanced desktop 3D printer ever
More informationCERASMART for PlanMill
CERASMART for PlanMill 2 introducing CERASMART for PlanMill the first FORCE ABSORBING FLEXIBLE NANO CERAMIC CERASMART is a revolutionary block. It combines exceptional strength and unparalleled aesthetics.
More informationRegeneration Bone Grafting & Soft Tissue Management
Regeneration Bone Grafting & Soft Tissue Management Human Histology OSTEON II 26.5 months Regeneration Products information Table of contents Bone Graft Material OSTEON II OSTEON OSTEON II Collagen OSTEON
More informationThe product must be only used by specifically trained personnel and under the relevant application by proven techniques.
Instruction manual Intended use: DD Bio ZX² monolith zero Liquids are indicated for coloring of pre-sintered Dental Direkt Zirconia milling blanks for the manufacture of dental restorations. Application:
More informationGUM COLORS INSTRUCTIONS FOR USE
GUM COLORS INSTRUCTIONS FOR USE The natural appearance of gingival parts is very important, especially when producing high-quality telescopic and implant supported supra constructions. The CERAMAGE GUM
More informationCeltra Press Developed to make a difference
Celtra Press Developed to make a difference Information for the dental laboratory Celtra Press The structure makes the difference Celtra is the new generation of high strength glass ceramics, zirconia
More informationBLOCK RANGE CAD. IPS e.max
BLOCK RANGE 682185 / en / 2018-01-24 www.ivoclarvivadent.com Ivoclar Vivadent AG Bendererstr. 2 9494 Schaan Liechtenstein Tel.: +423 235 35 35 Fax: +423 235 33 60 FOR A COMPREHENSIVE RANGE OF INDICATIONS
More informationTizian Blank. Tizian Zirconia Reinforced Composite
Tizian Blank Tizian Zirconia Reinforced Composite Inspired by Nature This innovative combination of materials offers both the advantages of high-performance acrylics and zirconium dioxide: The CAD/CAM
More informationCREATION WILLI GELLER INTERNATIONAL SIMPLY BRILLIANT INSTRUCTIONS FOR USE CREATION ZIRCONIUM OXIDE CERAMICS. MDT Christian Berg ZI/ZI-F
CREATION WILLI GELLER INTERNATIONAL SIMPLY BRILLIANT INSTRUCTIONS FOR USE CREATION ZIRCONIUM OXIDE CERAMICS MDT Christian Berg ZI/ZI-F 1 CONTENT Frame 3 Frame Shade / Neck Dentine 4 Dentine and Enamel
More informationProduct Information. Translucent Zirconium Dioxide For monolithic restorations. Giving a hand to oral health.
Product Information Translucent Zirconium Dioxide For monolithic restorations. Giving a hand to oral health. Zr tr cara Zirconium Dioxide the ideal material for aesthetic restoration. On account of its
More informationTECHNICAL GUIDE. For use with CEREC
TECHNICAL GUIDE For use with CEREC THE FUTURE AND SOLUTION OF INNOVATIVE ZIRCONIA FEATURES TRANSLUCENCY SIMILAR TO NATURAL TOOTH ENAMEL BY SPEED SINTERING The collaboration of Kuraray Noritake Dental s
More informationCeltra, Cercon, Celtra Ceram, Universal Stain and Glaze. All-ceramic solutions for every need. Brochure for the dental laboratory
Celtra, Cercon, Celtra Ceram, Universal Stain and Glaze All-ceramic solutions for every need Brochure for the dental laboratory Content Celtra Ceram High esthetic veneering 4 Celtra Press Monolithic stained
More informationCOMPUTER AIDED OVERPRESS - A SIMPLE PROCESS
COMPUTER AIDED OVERPRESS - A SIMPLE PROCESS HORST KOINIG The simplicity of Computer Aided Overpress (CAO) does not necessarily mean that the daily routine in dental laboratories is just as simple. Looking
More informationCERAMAGE UP. Indirect Flowable with Revolutionary Handling Characteristics. Visit or call
CERAMAGE UP Indirect Flowable with Revolutionary Handling Characteristics Visit www.shofu.com or call 800-827-4638 Revolutionary Handling Informed and educated patients demand treatments that are not only
More informationCOLOURS ON CERAMIC PRODUCTS FOR DENTAL USE
COLOURS ON CERAMIC PRODUCTS FOR DENTAL USE BTEETH : COLOUR LINE FOR DENTAL CERAMICS ZIRCONIA The technological evolution of dental laboratories will be increasingly based on the use of innovative materials
More informationAUGUST 2018 OPTIMIZING. Monolithic Translucent Zirconia. Edward A. McLaren, DDS, MDC
AUGUST 2018 OPTIMIZING Monolithic Translucent Zirconia Edward A. McLaren, DDS, MDC INTERNAL AND EXTERNAL COLOR MODIFICATION AND CUSTOM TEXTURIZING TECHNIQUES This ebook demonstrates very specific techniques
More informationCEREC CONNECT. Omnicam and Bluecam Workflow and Upload Instructions for Sending Cases to the Laboratory
CEREC CONNECT Omnicam and Bluecam for Sending Cases to the Laboratory Send your CEREC Omnicam and Bluecam scans to the laboratory via CEREC Connect portal. The CEREC intra-oral impression file is loaded
More informationCEREC CONNECT. Omnicam and Bluecam Workflow and Upload Instructions for Sending Cases to the Laboratory
CEREC CONNECT Omnicam and Bluecam for Sending Cases to the Laboratory Send your CEREC Omnicam and Bluecam scans to the laboratory via CEREC Connect portal. The CEREC intra-oral impression file is loaded
More informationall ceramic all you need LABSIDE Instructions for Use
all ceramic all you need LABSIDE Instructions for Use Table of Contents 3 IPS e.max System Practical Procedure Product Information 4 IPS e.max ZirCAD Scientific data Material Technical data Uses and safety
More informationNew as of: CEREC SpeedGlaze. Operating Instructions (valid for USA) English
New as of: 03.2018 CEREC SpeedGlaze Operating Instructions (valid for USA) English Table of contents Operating Instructions CEREC SpeedGlaze Table of contents 1 Product description... 3 1.1 Contact information...
More informationYou just get more with
You just get more with Over 5 million restorations delivered through the Authorized BruxZir Laboratory network The #1 prescribed brand of solid zirconia is available at dental laboratories nationwide.
More informationBLOCK RANGE CAD. IPS e.max
BLOCK RANGE 682185 / en / 2015-11-16 www.ivoclarvivadent.com Ivoclar Vivadent AG Bendererstr. 2 9494 Schaan Liechtenstein Tel.: +423 235 35 35 Fax: +423 235 33 60 FOR A COMPREHENSIVE RANGE OF INDICATIONS
More informationRegeneration Bone Grafting & Soft Tissue Management
Regeneration Bone Grafting & Soft Tissue Management 1 Regeneration Bone Grafting & Soft Tissue Management Table of contents Bone Graft Material OSTEON II OSTEON OSTEON II Collagen OSTEON Collagen 5 6
More informationTECHNICAL GUIDE KATANA ZIRCONIA MULTI-LAYER SERIE
TECHNICAL GUIDE KATANA ZIRCONIA MULTI-LAYER SERIE HIGH ESTHETIC WITH KATANA ZIRCONIA New series which features translucency similar to natural tooth enamel is now available. Introducing the new series
More informationLithium Disilicate. Zirconia
e.max CAD e.max Press e.max ZirCAD CadCAM Milled Crystalized Lithium Disilicate Pressed Lithium Disilicate CadCAM Milled Sintered Yttrium Zirconia 360 Lithium Disilicate Zirconia 400 1,000 Esthetic anterior
More informationDentium Implant System. New Product
Dentium Implant System New Product S.L.A. Surface S.L.A. (Sandblasting with Large grit and Acid etching) Higher bone-to-implant contact Faster bone formation on the surface Dentium Implant System Contents
More informationThe cutting edge of natural beauty KATANA ZIRCONIA MULTI-LAYERED SERIES
The cutting edge of natural beauty KATANA ZIRCONIA MULTI-LAYERED SERIES THAT S NATURAL! THE NEW POTENTIAL OF ZIRCONIA Naturalness for all your prosthetics. Our KATANA Zirconia Series brings naturalness
More informationClinical Guideline. for full contour zirconia restorations produced chairside with CEREC Zirconia (milling process).
Clinical Guideline for full contour zirconia restorations produced chairside with CEREC Zirconia (milling process). University of Zurich / University of Michigan CEREC.com/zirconia Clinical workflow step
More informationAcryCette. Beauty & Simplicity
AcryCette Beauty & Simplicity AcryCette Beauty & Simplicity Applications AcryCette is the system of acrylic resin facings that is ideal for restorations of temporary removable and fixed dentures thanks
More informationVITAVM 9 Quickstart Working Instructions
VITAVM 9 Quickstart Working Instructions For veneering zirconia substructures and for individualizing VITABLOCS and VITA PM 9 restorations. Available in VITA SYSTEM 3D-MASTER and VITA classical A1 D4 shades.
More informationLayering Guide for Labs. Lava Ceram. Overlay Porcelain for Lava Zirconia. Esthetic Restorations that are Truly Masterpieces
Layering Guide for Labs Lava Ceram Overlay Porcelain for Lava Zirconia Esthetic Restorations that are Truly Masterpieces The product is the essence, based on experience. An excellent match for your high
More informationAverage scan time is 1.40 minutes for a single crown. Non-contact, optical scanner with fringe projection triangulation for high accuracy
Technical Data Scan Volume Scan Time Scan Type Scan Handling Scanner Size 62*46*46mm³ Average scan time is 1.40 minutes for a single crown Non-contact, optical scanner with fringe projection triangulation
More informationSlimLine Product Catalog & Manual 1. Unit:mm, Scale 1: 1.5 / mm. SlimLine. Product Catalog / Manual
SlimLine Product Catalog & Manual 1 Unit:mm, Scale 1: 1.5 / mm SlimLine Product Catalog / Manual 2 SlimLine Product Catalog & Manual Unit:mm, Scale 1: 1.5 / mm Contents Introduction S.L.A. Surface 04 SlimLine
More informationBRILLIANT AESTHETICS + RELIABLE TECHNOLOGY
BRILLIANT AESTHETICS + RELIABLE TECHNOLOGY THE VENEERING CERAMIC FOR ZIRCONIA FRAMEWORKS There can be no progress without innovation. Ever since zirconia was introduced as a framework material, the aesthetic
More informationInjoy Prospekt eng 06_ :33 Uhr Seite 1. in:joy. Froggin good. in:joy the clever veneering composite.
Injoy Prospekt eng 06_10 01.07.2010 10:33 Uhr Seite 1 Froggin good. the clever veneering composite. Injoy Prospekt eng 06_10 01.07.2010 10:33 Uhr Seite 2 is a light-curing composite designed for high-quality
More informationI N F O R M A T I O N F O R D E N T I S T S. IPS e.max one system for every indication
I N F O R M A T I O N F O R D E N T I S T S IPS e.max one system for every indication all ceramic all you all need you IPS e.max one system for every indication Dental patients of today are looking for
More informationillustrated technique guide
DENTSPLY Caulk 38 West Clarke Avenue Milford, DE 9963 www.dentsply.com www.caulk.com -302-422-45 In Canada call -800-263-437 illustrated technique guide Complete Luting System for: 2006 DENTSPLY International.
More informationBeautiful teeth with CEREC.. in one single visit?
Beautiful teeth with CEREC. in one single visit? Ceramic fillings. With CEREC. Do you want highly aesthetic, tooth-coloured fillings created and placed during a single dental appointment? Would you prefer
More informationRELIABLE CONSISTENT BRILLIANT
Vintage-EP-VA_GB 04.04.2006 9:49 Uhr Seite 1 THE UNIVERSAL PORCELAIN SYSTEM RELIABLE CONSISTENT BRILLIANT INSTRUCTIONS FOR USE Vintage-EP-VA_GB 06.04.2006 11:31 Uhr Seite 2 The VINTAGE Porcelain System
More informationSR Vivodent S PE. Tooth mould chart. The exceptionally esthetic tooth for sophisticated needs. Vivodent. SR Orthotyp S PE
SR S PE Vivodent The exceptionally esthetic tooth for sophisticated needs Tooth mould chart SR Vivodent S PE SR Orthotyp S PE SMALL SR Vivodent S PE A22 A44 9.6 A11 9.3 41.6 7.9 41.3 7.7 41.8 7.9 A3 A4
More informationImplant-supported crowns Working Instructions
VITA ENAMIC Implant-supported crowns Working Instructions VITA shade determination VITA shade communication VITA shade reproduction VITA shade control Date of issue: 11.18 VITA perfect match. VITA ENAMIC
More informationSHOFU BLOCK & DISK CAD/CAM CERAMIC-BASED RESTORATIVE. Visit or call mm x 14mm
SHOFU BLOCK & DISK CAD/CAM CERAMIC-BASED RESTORATIVE 12mm x 14mm x 18mm 98mm x 14mm Visit www.shofu.com or call 8.827.4638 Created through a rigorous manufacturing process, Shofu Blocks & Disks HC demonstrate
More informationGUIDELINES FOR PROCESSING CELTRA DUO
GUIDELINES FOR PROCESSING CELTRA DUO 2 CONTENTS Minimum wall thickness 4 CAD / CAM processing 5 Finishing / polishing 5 Staining and glazing 5 Glaze-firing 7 Firing recommendations 8 Cementing 9 Ordering
More informationDeveloped to make a difference
Developed to make a difference Any block can make a restoration Celtra Duo (ZLS) provides the freedom to work your way Finally, a CEREC block that gives you total control. You choose the processing pathway.
More informationVITABLOCS Mark II for KaVo Everest Working Instructions. Always on the safe side
VITABLOCS Mark II for KaVo Everest Working Instructions Always on the safe side Vertrieb: KaVo Dental GmbH Bismarckring 39 D-88400 Biberach Tel. +49 7351 56-0 Fax +49 7351 56-1488 Hersteller: VITA Zahnfabrik
More informationINSTRUCTIONS FOR USE CREATION CLASSIC GINGIVA CERAMICS
CREATION WILLI GELLER INTERNATIONAL SIMPLY BRILLIANT INSTRUCTIONS FOR USE CREATION CLASSIC GINGIVA CERAMICS MDT Ralf Bahle CC 1 CONTENT Introduction 3 Frame 4 Opaque / 1 st Build-Up 5 Dentine Firing /
More informationSHOFU BLOCK & DISK CAD/CAM CERAMIC-BASED RESTORATIVE. Visit or call mm x 12mm x 16mm. 98mm x 14mm. 12mm x 14mm x 18mm
SHOFU BLOCK & DISK CAD/CAM CERAMIC-BASED RESTORATIVE 1mm x 12mm x 16mm 12mm x 14mm x 18mm 98mm x 14mm Visit www.shofu.com or call 8.827.4638 Created through a rigorous manufacturing process, Shofu Blocks
More informationCeramic Based Aesthetic CAD/CAM Restorative
Ceramic Based Aesthetic CAD/CAM Restorative Create Natural Aesthetics with High-Strength Materials SHOFU Block HC and Disk HC are the latest generation of hybrid-ceramic restorative materials for use with
More informationNote: The short arm of the BLPG tip is of the same length and measurement as the long arm of the T-bar and the Inline tip.
Crown Lengthening CROWN LENGTHENING (CL) GAUGE: The Crown Lengthening Gauge has the Biologic Periogauge (BLPG) tip on one end and the Papilla tip on the opposite end. The BLPG tip is used to achieve the
More informationIPS. Empress Esthetic. NEWS from the IPS Empress Original System
IPS Empress Esthetic NEWS from the IPS Empress Original System A tried-and-tested system with NEW aesthetic properties The IPS Empress pressed ceramic system, which has been clinically proven for more
More informationZirox Guidelines. Supplement to the ZIROX Instructions for Use (dated 07/05)
Zirox Guidelines Supplement to the ZIROX Instructions for Use (dated 07/05) - 03 Technical Hotline Germany +9 60 07 / 9 76-222 Working with ZrO 2 and Zirox Indications and contraindications ZIROX veneering
More informationEmpress *CAD IPS. Confidence. Reliability. Aesthetics. The world s leading all-ceramic
Empress CAD for the CAD/CAM Technology Information for Dentists Confidence Reliability Aesthetics IPS Empress *CAD * The world s leading all-ceramic Empress System A time-tested system. with new possibilities
More informationCOURSE CURRICULUM FOR AESTHETIC DENTISTRY
COURSE CURRICULUM FOR AESTHETIC DENTISTRY Esthetic Dentistry is actually the fourth dimension in clinical dentistry. In addition to biologic, Physiologic, and mechanical factors, all of which must be understood
More informationLava All-Zirconia. What about chipping? Not an issue for us. All-Zirconia Monolithic Restoration
Lava All-Zirconia All-Zirconia Monolithic Restoration What about chipping? Not an issue for us. Your affordable solution to PFM Lava All-Zirconia Lava All-Zirconia an outstanding material Lava Precision
More informationLava Ceram. Overlay Porcelain for Lava Frameworks
Lava Ceram Overlay Porcelain for Lava Frameworks An excellent match for your high standards Developed as a part of the Lava system, Lava Ceram Overlay Porcelain is the choice for restorations that are
More informationCompetence in. All-Ceramics
Competence in All-Ceramics The success story begins All-ceramics have firmly established themselves as the most popular restorative materials in dentistry. Up until the 80s, gold was the material of choice
More informationA lasting connection: Esthetic implantborne single-tooth restorations. Part 1
Clinical A lasting connection: Esthetic implantborne single-tooth restorations. Part 1 Oliver Morhofer, 1 Bernd Kobus 1 Introduction Restoring complex patient cases in such a way that the tooth shades
More informationRegeneration Bone Grafting & Soft Tissue Management
Regeneration Bone Grafting & Soft Tissue Management OSTEON TM II Table of Contents Bone Graft Material OSTEON TM II Collagen 04 OSTEON TM Collagen 06 OSTEON TM II 08 OSTEON TM 12 ORTHOPEDIC OSTEON TM 14
More informationUNIVERSAL SUBMICRON HYBRID COMPOSITE. BRILLIANT EverGlow. Enduring beauty made brilliant
UNIVERSAL SUBMICRON HYBRID COMPOSITE BRILLIANT EverGlow Enduring beauty made brilliant ENDURING BEAUTY MADE BRILLIANT THE DESIRE TO HAVE AN EASY-TO-HANDLE, AESTHETIC AND DURABLE FILLING MATERIAL IS SIGNIFICANT.
More informationFor technical assistance: Tel Working time: 8.30 am pm
I For technical assistance: Tel. +39 059 392827 Working time: 8.30 am - 5.30 pm Index JD Digital solutions for Intraoral Scanning JD Implant Libraries JD Guided Surgery Kit JD Surgical Guide and 3D Model
More informationDigital Dentistry Solution
Digital Dentistry Solution Digital Dentistry Solution 02 Digital Dentistry Solution CAD/CAM System Mill - Clinic Optimized for glass-ceramic High speed and steady quality in milling Simple and elegant
More informationINSTRUCTIONS FOR USE
Light-Curing Flowable Composite for Crowns & Bridges, Inlays and Veneers INSTRUCTIONS FOR USE As a manufacturer of direct and indirect filling as well as crown & bridge composites, SHOFU sets new standards
More informationBEGO COMPETENCE IN CERAMICS. Aesthetic restorations easy, customised and functional. Partners in Progress
BEGO COMPETENCE IN CERAMICS Aesthetic restorations easy, customised and functional Partners in Progress Sandra Tjarks Master Dental Technician, Product Manager BEGO Fabrication of all-ceramic restorations
More informationVITAVM 9 VENEERING MATERIAL. Working Instructions
VENEERING MATERIAL VITAVM 9 Working Instructions For all-ceramic substructure porcelains in the CTE range of approx. 10,5 such as VITA In-Ceram YZ CUBES For individualizing VITABLOCS Mark II for CEREC
More informationPermanent 2 nd Maxillary Molars
Permanent 2 nd Maxillary Molars In comparison to the first max molar First molars appears in the oral cavity at the age of 6 years old.. While 2 nd molar 3 rd molar Max. 2 nd molar have long roots (sometimes
More informationAs a dental ceramist, the trial of new or unfamiliar ceramic materials can be a time
1/2 point CDT documented scientific credit. See Page 37 Great Results, Firing After Firing By Frank Haeuser, CDT As a dental ceramist, the trial of new or unfamiliar ceramic materials can be a time consuming
More informationVeneering system. New Products. Implant prosthetics Metal-free restorations Crowns and bridges From the setup to the definitive veneer
Veneering system New Products Implant prosthetics Metal-free restorations Crowns and bridges From the setup to the definitive veneer The finishing material crea.lign and crea.lign Modifier crea.lign contains
More informationVITA VMK Master Quickstart Instructions
VITA VMK Master Quickstart Instructions For full veneering of metal frameworks in the conventional CTE range (13.8 15.2). Available in VITA SYSTEM 3D-MASTER and VITA classical A1 D4 shades. VITA VMK Master
More informationVITABLOCS Product information
VITABLOCS Product information VITA shade taking VITA shade communication VITA shade reproduction VITA shade control Date of issue: 07.13 VITABLOCS Mark II VITABLOCS TriLuxe VITABLOCS TriLuxe forte VITABLOCS
More informationall ceramic all you need
INFORMATION FOR THE DENTIST all ceramic all you need All you need for all-ceramics PRESS and CAD/CAM techniques Designed with simplicity and versatility in mind, IPS e.max comprises highly aesthetic and
More informationDentium Surgery Kit Dental Implant Surgical Instrument Set
www.dentium.com Dentium Surgery Kit Dental Implant Surgical Instrument Set Dentium Surgery Kit is a cassette of surgical instruments for periodontal and dental implant surgery. The cassette is divided
More information< > INVISALIGN OUTCOME SIMULATOR QUICK REFERENCE GUIDE. Home Contents Overview Important Notes. STEP 1 Scan Patient s Teeth Submit Scan
INVISALIGN OUTCOME SIMULATOR QUICK REFERENCE GUIDE 2012 Align Technology, Inc. All rights reserved. N12653 CONTENTS A STEP-BY-STEP GUIDE FOR THE INVISALIGN OUTCOME SIMULATOR Scan patient s teeth Inspect
More informationthe new dna of high strength glass ceramics
the new dna of high strength glass ceramics 1 the new dna of high strength glass ceramics Together with the Fraunhofer Institute and VITA, DENTSPLY has developed a new class of materials for high-strength
More informationPosterior Adhesive Dentistry
Posterior Adhesive Dentistry Stephen D. Poss DDS Michigan Dental The following pages contain a summary of information designed to assist you with the armamentarium, preparation, and cementation of anterior
More informationCLINICAL GUIDELINE. FOR FULL CONTOUR ZIRCONIA RESTORATIONS PRODUCED CHAIRSIDE WITH CEREC ZIRCONIA (MILLING PROCESS). CEREC.
CEREC.COM/ZIRCONIA CLINICAL GUIDELINE. FOR FULL CONTOUR ZIRCONIA RESTORATIONS PRODUCED CHAIRSIDE WITH CEREC ZIRCONIA (MILLING PROCESS). SIRONA / UNIVERSITY OF ZURICH / UNIVERSITY OF MICHIGAN MAY 2016 CLINICAL
More informationIPS Empress System Information for the. Laboratory. Confidence. Reliability. Esthetics. Empress IPS. System. The ultimate esthetic restorative system
IPS Empress System Information for the Laboratory Confidence Reliability Esthetics IPS Empress The ultimate esthetic restorative system System A time-tested system offers new possibilities For nearly 20
More informationPROPORTION GAUGE T-BAR TIP
Proportion PROPORTION GAUGE The Proportion Gauge has the T-bar tip on one end and an In-line tip on the opposite end. The T-bar tip is used on teeth with normal alignment and the In-line tip is used for
More informationcreamed I HAVE THE CHOICE AMBARINO High Class High-Performance Material enthusiastic in functionality and aesthetics.
I HAVE THE CHOICE AMBARINO High Class AMBARINO High Class High-Performance Material enthusiastic in functionality and aesthetics. Indications: Crown, bridge, inlay, onlay, veneer, tabletop Color: BL2,
More information3D PRINTING WORKFLOW FOR THE INHOUSE MOVEMENT
EN 3D PRINTING WORKFLOW FOR THE INHOUSE MOVEMENT REVOLUTIONARY HIGH-SPEED 3D PRINTING TECHNOLOGY MEETS CERAMILL SYSTEM The revolutionary high-speed Figure 4 TM -3D printing technology with the industry's
More informationPress Impulse. In pursuit of nature. all ceramic all you need
Press Impulse In pursuit of nature all ceramic all you need Press Impulse Ingots with an added Impulse IPS e.max Press: The expanded ingot concept... The IPS e.max Press lithium disilicate (LS 2 ) ingots
More informationLava All-Zirconia. Saving time and money. plus offering supreme reliability. All-Zirconia Monolithic Restoration
Lava All-Zirconia All-Zirconia Monolithic Restoration Saving time and money plus offering supreme reliability Passionate about Passionate about Productivity Lava Precision Solutions the clinical success
More informationEmpress *CAD. Confidence. Reliability. Esthetics. IPS Empress CAD for the CAD/CAM Technology Information for Dentists
Empress CAD for the CAD/CAM Technology Information for Dentists Confidence Reliability Esthetics Empress *CAD * The ultimate esthetic restorative system Empress System A time-tested system. with new possibilities
More informationEmpress * CAD IPS. Confidence. Reliability. Esthetics. IPS Empress CAD for the CAD/CAM Technology Information for Dentists
Empress CAD for the CAD/CAM Technology Information for Dentists Confidence Reliability Esthetics Empress * CAD * The ultimate esthetic restorative system Empress System A time-tested system. with new possibilities
More informationSMILE DESIGN SEVEN KEY AREAS
SMILE DESIGN SEVEN KEY AREAS I SHADING SYSTEM Computerized Shading 1. Unknown Base Shade 2. Additional Dimensions 3. Practice Builder Cervical Shade Incisal Shade Basic Shade Mix Colors Bleached Shades
More informationMetal Ceramic. Perfect shades straight from the bottle. Instruction Manual. Products for better dentistry
Metal Ceramic MC Perfect shades straight from the bottle Instruction Manual Products for better dentistry Metal Ceramic Metal Ceramic MC Perfect shades straight from the bottle is a complete bonded crown
More informationLava Lava Network Open Interface CAD Design: 3M ESPE AG 3M ESPE
Lava Lava Network Open Interface Instructions for Use CAD Design: Lava Frame Lava DVS Lava Wax 3M ESPE AG Dental Products D-82229 Seefeld - Germany 3M ESPE Dental Products St. Paul, MN 55144-1000 U.S.A.
More informationblocs Grandio blocs nano-hybrid composite cad / cam block
blocs Nano-hybrid composite CAD / CAM block NANO-HYBRID EXPERTISE NOW ALSO AVAILABLE FOR CAD / CAM APPLICATIONS Silicate ceramics, lithium disilicate, hybrid ceramics, composite, zirconium dioxide there
More informationEverything. Supplying everything dental for your practice needs
Everything Connect Dental Supplying everything dental for your practice needs henryschein.co.uk Highly accurate, durable and 3D Conebeam digital image ORTHOPHOS XG3D/SL Practice Management Software Secure
More informationScrew-retained implant-supported restoration in the edentulous maxilla
Screw-retained implant-supported restoration in the edentulous maxilla A working document for the production of a milled zirconium dioxide framework Authors: Dr Octavian Fagaras & Milos Miladinov, Romania
More information