Safety Data Sheet according to Regulation (EC) No 1907/2006

Transcription

1 Safety Data Sheet according to Regulation (EC) No 1907/2006 Page 1 of 14 LOCTITE EA 9395 AERO PART A QT known as EA 9395 PART A SDS No. : Revision: printing date: Replaces version from: SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Contains: 1.2. Relevant identified uses of the substance or mixture and uses advised against Intended use: Part A of 2-K-Epoxy Adhesive 1.3. Details of the supplier of the safety data sheet Henkel Ireland Operations and Research Limited Tallaght Business Park Dublin 24 Ireland Phone: +353 ( ) Fax-no.: +353 ( ) ua-productsafety.uk@henkel.com 1.4. Emergency telephone number 24 Hours Emergency Tel: +44 (0) Classification of the substance or mixture SECTION 2: Hazards identification Classification (CLP): Skin irritation Category 2 H315 Causes skin irritation. Serious eye irritation Category 2 H319 Causes serious eye irritation. Skin sensitizer Category 1 H317 May cause an allergic skin reaction. Chronic hazards to the aquatic environment Category 2 H411 Toxic to aquatic life with long lasting effects Label elements Label elements (CLP):

2 Page 2 of 14 Hazard pictogram: Signal word: Hazard statement: Warning H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H411 Toxic to aquatic life with long lasting effects. Precautionary statement: Prevention Precautionary statement: Response P273 Avoid release to the environment. P280 Wear protective gloves. P302+P352 IF ON SKIN: Wash with plenty of soap and water. P333+P313 If skin irritation or rash occurs: Get medical advice/attention. P337+P313 If eye irritation persists: Get medical advice/attention Other hazards None if used properly. Not fulfilling Persistent, Bioaccumulative and Toxic (PBT), very Persistent and very Bioaccumulative (vpvb) criteria Mixtures General chemical description: Epoxy Adhesive Base substances of preparation: resins Filler SECTION 3: Composition/information on ingredients Declaration of the ingredients according to CLP (EC) No 1272/2008: average molecular weight EC Number REACH-Reg No content Classification % Skin Sens. 1 H317 Aquatic Chronic 2 H % Skin Irrit. 2 H315 Skin Sens. 1 H317 Eye Irrit. 2 H319 Aquatic Chronic 2 H411 For full text of the H - statements and other abbreviations see section 16 "Other information". Substances without classification may have community workplace exposure limits available Description of first aid measures Inhalation: Move to fresh air. If symptoms persist, seek medical advice. SECTION 4: First aid measures

3 Page 3 of 14 Skin contact: Rinse with running water and soap. Obtain medical attention if irritation persists. Eye contact: Rinse immediately with plenty of running water (for 10 minutes), seek medical attention from a specialist. Ingestion: Rinse mouth, drink 1-2 glasses of water, do not induce vomiting, consult a doctor Most important symptoms and effects, both acute and delayed EYE: Irritation, conjunctivitis. SKIN: Redness, inflammation. SKIN: Rash, Urticaria Indication of any immediate medical attention and special treatment needed See section: Description of first aid measures 5.1. Extinguishing media Suitable extinguishing media: Foam, extinguishing powder, carbon dioxide. Fine water spray SECTION 5: Firefighting measures Extinguishing media which must not be used for safety reasons: High pressure waterjet 5.2. Special hazards arising from the substance or mixture In the event of a fire, carbon monoxide (CO), carbon dioxide (CO2) and nitrogen oxides (NOx) can be released Advice for firefighters Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear. Additional information: In case of fire, keep containers cool with water spray. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Avoid contact with skin and eyes. Ensure adequate ventilation. Wear protective equipment Environmental precautions Do not empty into drains / surface water / ground water Methods and material for containment and cleaning up Scrape up as much material as possible. Sweep up spilled material. Avoid creating dust. Store in a partly filled, closed container until disposal Reference to other sections See advice in section 8 SECTION 7: Handling and storage

4 Page 4 of Precautions for safe handling Ensure good ventilation/suction at the workplace. Avoid skin and eye contact. See advice in section 8 Do not spray against flames or glowing bodies. Keep away from sources of ignition - no smoking. Hygiene measures: Wash hands before work breaks and after finishing work. Do not eat, drink or smoke while working. Good industrial hygiene practices should be observed Conditions for safe storage, including any incompatibilities Store in sealed original container. Store in a cool, dry place. Ensure that storage and workrooms are adequately ventilated. Must be stored in a room with spill collection facilities. Keep away from heat and direct sunlight. Refer to Technical Data Sheet 7.3. Specific end use(s) Part A of 2-K-Epoxy Adhesive SECTION 8: controls/personal protection 8.1. Control parameters Occupational Limits Valid for Great Britain Ingredient [Regulated substance] ppm mg/m 3 Value type Short term exposure limit category / Remarks Silica, vitreous 0,08 Time Weighted Average (TWA): [SILICA, FUSED, RESPIRABLE DUST] Regulatory list EH40 WEL Occupational Limits Valid for Ireland Ingredient [Regulated substance] ppm mg/m 3 Value type Short term exposure limit category / Remarks Silica, vitreous 0,08 Time Weighted Average (TWA): [SILICA, FUSED, RESPIRABLE DUST] Regulatory list IR_OEL

5 Page 5 of 14 Predicted No-Effect Concentration (PNEC): Name on list Environmental Compartment aqua (freshwater) aqua (marine water) aqua (intermittent releases) sewage treatment plant (STP) sediment (freshwater) sediment (marine water) Air period Value mg/l ppm mg/kg others 0,005 mg/l 0 mg/l 0,047 mg/l 1000 mg/l 0,017 mg/kg 0,002 mg/kg soil 0,011 mg/kg Predator aqua (freshwater) aqua (marine water) sewage treatment plant (STP) sediment (freshwater) sediment (marine water) 0,006 mg/l 0,001 mg/l 10 mg/l 0,996 mg/kg 0,1 mg/kg soil 0,196 mg/kg oral 11 mg/kg Remarks

6 Page 6 of 14 Derived No-Effect Level (DNEL): Name on list Application Area Route of Health Effect Workers dermal Long term Workers dermal Acute/short term Workers Inhalation Acute/short term Workers dermal Long term Workers Inhalation Long term General population General population General population General population General population General population dermal dermal oral oral inhalation inhalation Acute/short term Long term Acute/short term Long term Acute/short term Long term Time Value 0,5 mg/kg 8,33 mg/kg 12,25 mg/m3 8,33 mg/kg 12,25 mg/m3 3,571 mg/kg 3,571 mg/kg 0,75 mg/kg 0,75 mg/kg 0,75 mg/m3 0,75 mg/m3 Remarks Biological Indices: None 8.2. controls: Engineering controls: Ensure good ventilation/extraction. Respiratory protection: Ensure adequate ventilation. An approved mask or respirator fitted with an organic vapour cartridge should be worn if the product is used in a poorly ventilated area Filter type: A (EN 14387)

7 Page 7 of 14 Hand protection: Chemical-resistant protective gloves (EN 374). Suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to > 30 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness) Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness) This information is based on literature references and on information provided by glove manufacturers, or is derived by analogy with similar substances. Please note that in practice the working life of chemical-resistant protective gloves may be considerably shorter than the permeation time determined in accordance with EN 374 as a result of the many influencing factors (e.g. temperature). If signs of wear and tear are noticed then the gloves should be replaced. Eye protection: Safety glasses with sideshields or chemical safety goggles should be worn if there is a risk of splashing. Protective eye equipment should conform to EN166. Skin protection: Wear suitable protective clothing. Protective clothing should conform to EN for liquid splashes or to EN for dusts. Advices to personal protection equipment: The information provided on personal protective equipment is for guidance purposes only. A full risk assessment should be conducted prior to using this product to determine the appropriate personal protective equipment to suit local conditions. Personal protective equipment should conform to the relevant EN standard. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Appearance solid, paste blue Odor Slight Odour threshold ph Melting point Solidification temperature Initial boiling point (1.013 hpa) Flash point Evaporation rate Flammability Explosive limits Vapour pressure Relative vapour density: Density (20 C (68 F)) Bulk density Solubility Solubility (qualitative) (20 C (68 F); Solvent: Water) Solubility (qualitative) (20 C (68 F); Solvent: ketones) Partition coefficient: n-octanol/water Auto-ignition temperature Decomposition temperature Viscosity Viscosity (kinematic) Explosive properties Oxidising properties > 93 C (> F) > 93 C (> F) 1,25 g/cm3 Negligible Partially miscible

8 Page 8 of Other information SECTION 10: Stability and reactivity Reactivity Reacts with alcohols and amines. Reacts with oxidants, acids and lyes Reaction with some curing agents may produce an exothermic reaction which in large masses could cause runaway polymerization Chemical stability Stable under recommended storage conditions Possibility of hazardous reactions See section reactivity Conditions to avoid Danger of decomposition if exposed to heat. Avoid mixing resin (Part A) and curing agent (Part B) unless you plan to use immediately. Failure to observe these precautions may result in excessive heat build-up causing an exotherm Incompatible materials See section reactivity Hazardous decomposition products Hydrocarbons Irritating vapors. Rapid polymerisation may generate excessive heat and pressure. May produce fumes when heated to decomposition. Fumes may contain carbon monoxide and other toxic fumes. See section Information on toxicological effects SECTION 11: Toxicological information General toxicological information: The mixture is classified based on the available hazard information for the ingredients as defined in the classification criteria for mixtures for each hazard class or differentiation in Annex I to Regulation (EC) No 1272/2008. Relevant available health/ecological information for the substances listed under Section 3 is provided in the following. Oral toxicity: May cause irritation to the digestive tract. Inhalative toxicity: May cause irritation to respiratory system. Skin irritation: Causes skin irritation. Eye irritation: Causes serious eye irritation. Sensitizing: May cause an allergic skin reaction.

9 Page 9 of 14 Acute oral toxicity: 4,4'-Methylenebis[N,N- bis(2,3- Value type Value Route of application time Species Method LD50 > mg/kg oral rat OECD Guideline 401 (Acute Oral Toxicity) LD50 > mg/kg oral rat OECD Guideline 420 (Acute Oral Toxicity) Acute inhalative toxicity: 4,4'-Methylenebis[N,N- bis(2,3- Value Value Route of Species Method type application time LC50 4 h rat not specified Acute dermal toxicity: 4,4'-Methylenebis[N,N- bis(2,3- Value type Value Route of application time Species Method LD50 > mg/kg dermal rabbit not specified LD50 > mg/kg dermal rat not specified Skin corrosion/irritation: 4,4'-Methylenebis[N,N- bis(2,3- Result time Species Method slightly irritating rabbit OECD Guideline 404 (Acute Dermal Irritation / Corrosion) moderately irritating 24 h rabbit Draize Test Serious eye damage/irritation: Result time Species Method not irritating rabbit OECD Guideline 405 (Acute Eye Irritation / Corrosion) Respiratory or skin sensitization: 4,4'-Methylenebis[N,N- bis(2,3- Sensitizing sensitising Result Test type Species Method Mouse local lymphnod e assay (LLNA) Mouse local lymphnod e assay (LLNA) mouse mouse OECD Guideline 429 (Skin Sensitisation: Local Lymph Node Assay) OECD Guideline 429 (Skin Sensitisation: Local Lymph Node Assay)

10 Page 10 of 14 Germ cell mutagenicity: 4,4'-Methylenebis[N,N- bis(2,3- Result Type of study / Route of administration Metabolic activation / time Species Method negative oral: gavage mouse OECD Guideline 474 (Mammalian Erythrocyte Micronucleus Test) negative bacterial reverse mutation assay (e.g Ames test) with and without negative oral: gavage mouse not specified OECD Guideline 472 (Genetic Toxicology: Escherichia coli, Reverse Mutation Assay) Carcinogenicity: Reproductive toxicity: Result Species Sex timefrequenc y of treatment not carcinogenic mouse male 2 y daily not carcinogenic rat male/female 2 y daily Route of application Method dermal OECD Guideline 453 (Combined Chronic Toxicity / Carcinogenicity Studies) oral: gavage OECD Guideline 453 (Combined Chronic Toxicity / Carcinogenicity Studies) Hazardous substances Result / Classification Species time NOAEL P = >= 50 mg/kg NOAEL F1 = >= 750 mg/kg NOAEL F2 = >= 750 mg/kg Two generation study oral: gavage Species Method 238 d rat OECD Guideline 416 (Two- Generation Reproduction Toxicity Study) Repeated dose toxicity Result Route of application time / Frequency of treatment Species Method NOAEL=50 mg/kg oral: gavage 14 wdaily rat OECD Guideline 408 (Repeated Dose 90-Day Oral Toxicity in Rodents) SECTION 12: Ecological information General ecological information: The mixture is classified based on the available hazard information for the ingredients as defined in the classification criteria for mixtures for each hazard class or differentiation in Annex I to Regulation (EC) No 1272/2008. Relevant available health/ecological information for the substances listed under Section 3 is provided in the following Toxicity Ecotoxicity: Toxic to aquatic life with long lasting effects. Do not empty into drains / surface water / ground water.

11 Page 11 of 14 4,4'-Methylenebis[N,Nbis(2,3-4,4'-Methylenebis[N,Nbis(2,3-4,4'-Methylenebis[N,Nbis(2,3-4,4'-Methylenebis[N,Nbis(2,3- average molecular weight average molecular weight average molecular weight average molecular weight average molecular weight Value type Value Acute Toxicity Study time Species Method LC50 7 mg/l Fish 96 h Cyprinus carpio OECD Guideline 203 (Fish, Acute Toxicity Test) EC50 6,7 mg/l Daphnia 48 h Daphnia magna OECD Guideline 202 (Daphnia sp. Acute Immobilisation Test) NOEC 0,32 mg/l Algae 72 h Pseudokirchneriella subcapitata OECD Guideline 201 (Alga, Growth Inhibition Test) EC50 > 100 mg/l Algae 72 h Pseudokirchneriella subcapitata OECD Guideline 201 (Alga, Growth Inhibition Test) IC50 > mg/l Bacteria 24 h Pseudomonas sp. DIN 38412, part 8 (Pseudomonas Zellvermehrungshe mm-test) LC50 1,75 mg/l Fish 96 h Oncorhynchus mykiss OECD Guideline 203 (Fish, Acute Toxicity Test) EC50 1,7 mg/l Daphnia 48 h Daphnia magna OECD Guideline 202 (Daphnia sp. Acute Immobilisation Test) EC50 > 11 mg/l Algae 72 h Scenedesmus capricornutum OECD Guideline 201 (Alga, Growth Inhibition Test) NOEC 4,2 mg/l Algae 72 h Scenedesmus capricornutum OECD Guideline 201 (Alga, Growth Inhibition Test) IC50 > 100 mg/l Bacteria 3 h activated sludge, industrial other guideline: NOEC 0,3 mg/l chronic Daphnia 21 d Daphnia magna OECD 211 (Daphnia magna, Reproduction Test) Persistence and degradability Persistence and Biodegradability: The product is not biodegradable. 4,4'-Methylenebis[N,Nbis(2,3- average molecular weight Result Route of application Degradability Method not readily biodegradable. aerobic 48 % OECD Guideline 301 F (Ready Biodegradability: Manometric Respirometry Test) aerobic 5 % OECD Guideline 301 F (Ready Biodegradability: Manometric Respirometry Test) Bioaccumulative potential / Mobility in soil Mobility: Cured adhesives are immobile. Bioaccumulative potential: No data available. LogPow Bioconcentration factor (BCF) time Species Temperature Method

12 Page 12 of 14 4,4'-Methylenebis[N,Nbis(2,3- average molecular weight 2,12 22 C OECD Guideline 107 (Partition Coefficient (noctanol / water), Shake Flask Method) 3, C EU Method A.8 (Partition Coefficient) Results of PBT and vpvb assessment PBT/vPvB Not fulfilling Persistent, Bioaccumulative and Toxic (PBT), very Persistent and very Bioaccumulative (vpvb) criteria. Not fulfilling Persistent, Bioaccumulative and Toxic (PBT), very Persistent and very Bioaccumulative (vpvb) criteria Other adverse effects No data available. SECTION 13: Disposal considerations Waste treatment methods Product disposal: Collection and delivery to recycling enterprise or other registered elimination institution. Dispose of in accordance with local and national regulations. Special waste incineration with the approval of the responsible local authority. Disposal of uncleaned packages: After use, tubes, cartons and bottles containing residual product should be disposed of as chemically contaminated waste in an authorised legal land fill site or incinerated. Packaging that cannot be cleaned are to be disposed of in the same manner as the product. Waste code waste adhesives and sealants containing organic solvents and other dangerous substances The valid EWC waste code numbers are source-related. The manufacturer is therefore unable to specify EWC waste codes for the articles or products used in the various sectors. The EWC codes listed are intended as a recommendation for users. We will be happy to advise you.

13 Page 13 of 14 SECTION 14: Transport information UN number ADR 3077 RID 3077 ADN 3077 IMDG 3077 IATA UN proper shipping name ADR RID ADN IMDG IATA ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (Tetraglycidyl diaminodiphenylmethane,bisphenol-a Epichlorhydrin resin) ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (Tetraglycidyl diaminodiphenylmethane,bisphenol-a Epichlorhydrin resin) ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (Tetraglycidyl diaminodiphenylmethane,bisphenol-a Epichlorhydrin resin) ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (Tetraglycidyl diaminodiphenylmethane,bisphenol-a Epichlorhydrin resin) Environmentally hazardous substance, solid, n.o.s. (Tetraglycidyl diaminodiphenylmethane,bisphenol-a Epichlorhydrin resin) Transport hazard class(es) ADR 9 RID 9 ADN 9 IMDG 9 IATA Packing group ADR RID ADN IMDG IATA III III III III III Environmental hazards ADR RID ADN IMDG IATA Marine pollutant Special precautions for user ADR

14 Page 14 of 14 RID ADN IMDG IATA Tunnelcode: The transport classifications in this section apply generally to packed and bulk goods alike. For containers with a net volume of no more than 5 L for liquid substances or a net mass of no more than 5 kg for solid substances per individual or inner package, the exemptions SP 375 (ADR), 197 (IATA), 969 (IMDG) may be applied, which can result in a deviation from the transport classification for packed goods Transport in bulk according to Annex II of Marpol and the IBC Code SECTION 15: Regulatory information Safety, health and environmental regulations/legislation specific for the substance or mixture VOC content < 3 % (2010/75/EC) Chemical safety assessment A chemical safety assessment has not been carried out. SECTION 16: Other information The labelling of the product is indicated in Section 2. The full text of all abbreviations indicated by codes in this safety data sheet are as follows: H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H411 Toxic to aquatic life with long lasting effects. Further information: This information is based on our current level of knowledge and relates to the product in the state in which it is delivered. It is intended to describe our products from the point of view of safety requirements and is not intended to guarantee any particular properties. Relevant changes in this safety data sheet are indicated by vertical lines at the left margin in the body of this document. Corresponding text is displayed in a different color on shadowed fields.