MATERIAL SAFETY DATA SHEET

Size: px

Start display at page:

Download "MATERIAL SAFETY DATA SHEET"

Winfred Joseph
5 years ago
Views:

1 MATERIAL SAFETY DATA SHEET S-360 PART A 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION MANUFACTURER: SUMMITVILLE LABORATORIES, INC. PO BOX ARBOR ROAD MINERVA, OH PROPER SHIPPING NAME: Not Regulated UN NUMBER: UN NUMBER: Not Reg INFORMATION PHONE: HAZARD CLASS: Not Reg EMERGENCY PHONE: PACKING: Not Reg PRODUCT NAME: S-360 PART A HMIS INFORMATION: PRODUCT NUMBER: HEALTH: 2 UPC NUMBER: FLAMMABILITY: 1 PREPARED BY: Safety Manager REACTIVITY: 0 DATE PREPARED: 7/16/12 LAST REVISION: 7/16/12 SYNONYMS: DIGLYCIDYL ETHER OF BISPHENOL A PROTECTIVE: 2. COMPOSITION/INFORMATION ON INGREDIENTS Chemical Name CAS # % OSHA PEL ACGIH TLV bisphenol A Diglycidyl Ether Resin STYRENE POLYMER ALIPHATIC EPOXIDE SILICA, AMORPHOUS, FUMED TLV = 2mg/M3 FOR RESPIRABLE FRACTION OF DUST 3. HAZARDOUS IDENTIFICATION EMERGENCY OVERVIEW: This material is not flammable or rective; but should be stored in a dry area to preserve material. POTENTIAL HEALTH EFFECTS EYE CONTACT: Can cause severe eye irritation C INHALATION: INGESTION: SKIN CONTACT: Inhalation by sensitized individual(s) may cause asthmatic symptoms to occur. May cause severe and permanent damage to mouth, throat, stomach, and digestive tract. Prolonged exposure may cause skin irritation. SIGNS AND SYMPTOMS OF EXPOSURE: Shortness of breathing, confused behavior, redness of skin, swelling of tissues, watery eyes, nausa. S-360 PART A Page 1 of 4

2 4. FIRST AID MEASURES EYE CONTACT: Immediately flush eyes with plenty of water. Get medical attention, if irritation persists. INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention immediately. INGESTION: If swallowed, drink large amounts of water and induce vomitting. Never give anything by mouth to an unconscious person. Seek medical attention immediately. SKIN CONTACT: Wash affected area with soap and water. If irritation persists, get medical attention. AGGRAVATED MEDICAL CONDITIONS: Frequent and prolonged contact with eyes and skin can cause irritation. Inhalation by sensitized persons may cause asthmatic, or other reactions. Sensitized persons may experience eczema reactions with exposure by skin contact. SUPPLEMENTAL HEALTH INFORMATION: This material may cause sensitization from repeated handling without the use of proper protective equipment. Sensitized individuals will have varied allergic reactions to this material or vapors from this material as a life-long, temporary allergic reaction once sensitized. 5. FIRE FIGHTING MEASURES FLAMMABLE PROPERTIES FLASH POINT: 300 F FLASH POINT METHOD USED: Tag Closed Cup AUTO IGNITION: LEL: UEL: EXTINGUISHING MEDIA: Dry chemical, foam, co2. SPECIAL FIRE FIGHTING PROCEDURES: The use of a positive pressure, SCBA is recommended for firefighters. UNUSUAL FIRE AND EXPLOSION HAZARDS: None known. COMBUSTION PRODUCTS: none known 6. ACCIDENTAL RELEASE MEASURES STEPS TO BE TAKEN IN CASE MATERIAL IS SPILLED OR RELEASED: Small spills: Mop up, wipe up or soak up immediately. Remove to out of doors. Large spills: Evacuate area. Contain liquid; transfer to closed metal containers. Keep out of water supply. 7. HANDLING AND STORAGE PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE: Keep container closed when not in use. S-360 PART A Page 2 of 4

3 OTHER PRECAUTIONS: 8. EXPOSURE CONTROL/PERSONAL PROTECTION RESPIRATORY PROTECTION: Proper ventilation required. Wear an appropriate cartridge respirator when strong odor and poor ventilation are present. VENTILATION: Provide adequate ventilation. PROTECTIVE GLOVES: Impervious gloves and splash aprons recommended. EYE PROTECTION: Safety glasses with side shields (or goggles) as appropriate. OTHER PROTECTIVE CLOTHING OR EQUIPMENT: WORK / HYGIENIC PRACTICES: Use good personal hygiene when handling this product. Wash hands after use, before smoking, or using the toilet. ENGINEERING CONTROLS: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. EXPOSURE GUIDELINES: 9. PHYSICAL AND CHEMICAL PROPERTIES SOLUBILITY IN WATER: APPEARANCE AND ODOR: Heavy granular paste with slight ammonia odor. (Color Varies) BOILING POINT: PERCENT VOLATILE: 0 VAPOR PRESSURE: EVAPORATION: PH: MOLECULAR WEIGHT: POUNDS PER GALLON: VAPOR DENSITY: SPECIFIC GRAVITY: 1.3 MELTING POINT: FREEZING POINT: OTHER PROPERTIES: 10. STABILITY AND REACTIVITY STABLE: Stable S-360 PART A Page 3 of 4

4 INCOMPATIBILITY: Amines, Bases, Mercaptans, and Strong acids. HAZARDOUS DECOMPOSITION OR BY PRODUCTS: None HAZARDOUS POLYMERIZATION: Will Not Occur 11. TOXICOLOGY INFORMATION 12. ECOLOGICAL INFORMATION 13. DISPOSAL CONSIDERATIONS The preferred options for disposal are to send to licensed reclaimers, or to permitted incinerators. Any disposal practice must be in compliance with federal, state, and local regulations. Do not dump into sewers, ground, or any body of water. 14. TRANSPORTATION INFORMATION DOT CLASS: HAZARD CLASS: UN NUMBER: PACKING: GUIDE NUMBER: Not Regulated Not Reg Not Reg Not Reg N/R PROPER SHIPPING NAME: Not Regulated 15. REGULATORY INFORMATION No information available. 16. OTHER INFORMATION HMIS INFORMATION: HEALTH: 2 FLAMMABILITY: 1 REACTIVITY: 0 PROTECTIVE: C Disclaimer The information contained herein is based on the data available to us and is believed to be accurate. However, no warranty is expressed or implied regarding the accuracy of this data or the results to be obtained from the use thereof. We assume no responsibility for injuries from the use of the product described herein. Active MSDS statement S-360 PART A Page 4 of 4

5 MATERIAL SAFETY DATA SHEET S-360 PART B 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION MANUFACTURER: SUMMITVILLE TILES, INC. STATE ROUTE 644 P.O. BOX 73 SUMMITVILLE, OH PROPER SHIPPING NAME: Amines, liquid, corrosive, n.o.s. (4,4-Methylenebiscyclohexanamine, No nyl Phenol, Polyoxypropylenediamine) UN NUMBER: UN NUMBER: UN 2735 INFORMATION PHONE: HAZARD CLASS: 8 EMERGENCY PHONE: PACKING: III PRODUCT NAME: S-360 PART B HMIS INFORMATION: PRODUCT NUMBER: HEALTH: 2 UPC NUMBER: FLAMMABILITY: 1 PREPARED BY: Safety Manager REACTIVITY: 1 DATE PREPARED: 5/25/12 LAST REVISION: 5/25/12 SYNONYMS: PROTECTIVE: 2. COMPOSITION/INFORMATION ON INGREDIENTS Chemical Name CAS # % OSHA PEL ACGIH TLV TRADE SECRET ALPHA-(2-AMINOMETHYL)-OMEGA-(2-AMINOMET HYLETHOX)-POLY(OXY(METHYL-1,2-ETHAND X PHENOL, NONYL CYCLOHEXYLAMINE N/E N/E BENZYL ALCOHOL TRIS-2,4,6-(DIMETHYLAMINOMETHYL)PHENOL FORMALDEHYDE POLYMER WITH TOLUENE SILICA, CRYSTALLINE - QUARTZ PEL = SEE TABLE TLV = 0.1mg/M3 Z-3 respirable dust MAGNESIUM OXIDE PEL = Total dust TLV = 10mg/M3 fume, as 15mg/M3 Mg WOLLASTONITE CELLULOSE n/a n/a CALCINED PETROLEUM COKE NOT LISTED NOT LISTED FULLERS EARTH NONE NONE 3. HAZARDOUS IDENTIFICATION EMERGENCY OVERVIEW: If difficulty breathing, remove person to supply fresh air. Contact physician if difficulty of breathing persists. If ingested, seek urgent medical attention. Do not induce vomiting or give any liquids orally when treating an unconscious person. POTENTIAL HEALTH EFFECTS EYE CONTACT: Corrosive to the eyes and may cause severe damage including blindness. INHALATION: INGESTION: SKIN CONTACT: Irritating to the nose, throat, and respiratory tract. Choking, coughing, and headache may occur. Corrosive and may cause severe and permanent damage to mouth, throat, and stomach. Severely irritating; may cause permanent skin damage. Prolonged skin contact may also cause harmful amounts of material to be absorbed into the skin. S-360 B MSDS rtf Page 1 of 4 Rev Date

6 SIGNS AND SYMPTOMS OF EXPOSURE: Shortness of breathing, confused behavior, redness of skin, nausea, headache, burning sensation on skin, eyes, nasal passages, mouth, digestive tract, general body discomfort (ill feeling). 4. FIRST AID MEASURES EYE CONTACT: Immediately flush with plenty of water. If easy to do, remove any contact lenses. Get medical attention if irritation persists. Remove material from skin and clothing INHALATION: INGESTION: SKIN CONTACT: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention immediately. Get medical attention immediately. Immediately flush area with plenty of water. Remove contaminated clothing. Wash skin with a mild soap as soon as possible. Contact a medical physician if irritation persists. Wash cloths before reuse. AGGRAVATED MEDICAL CONDITIONS: Persons with a history of chronic respiratory or skin conditions may be at increased risk of inflammation of their condition from exposure to this product. SUPPLEMENTAL HEALTH INFORMATION: Ammonia sensitized individuals may experience dermatitis, difficulty breathing, or other symptoms from short contact periods. 5. FIRE FIGHTING MEASURES FLAMMABLE PROPERTIES FLASH POINT: 200+ FLASH POINT METHOD USED: (PMCC) AUTO IGNITION: ND LEL: UEL: EXTINGUISHING MEDIA: Dry chemical, foam, Co2. SPECIAL FIRE FIGHTING PROCEDURES: Firefighters should wear proper protective equipment and self-contained breathing apparatus with full face piece in positive pressure mode. Move containers from fire area if it can be done without risk. Use water to keep fire-exposed containers cool. UNUSUAL FIRE AND EXPLOSION HAZARDS: Containers exposed to intense heat from fires should be cooled with water to prevent vapor pressure buildup which could result in container rupture. Container areas exposed to direct flame contact should be cooled with large amounts of water. COMBUSTION PRODUCTS: Mixtures of carbon monoxide, carbon dioxide, and other hydrocarbons. 6. ACCIDENTAL RELEASE MEASURES STEPS TO BE TAKEN IN CASE MATERIAL IS SPILLED OR RELEASED: Ventilate area of leak or spill. Dike material to prevent further spreading. Stop the leak if possible without injury. Remove all sources of ignition. Clean-up personnel require protective clothing and respiratory protection from vapors including SCBA and butyl rubber protective clothing. Use self-contained decontamination area for clean-up personnel. Only specially trained or qualified personnel should handle the emergency. Absorb unrecoverable material and transfer to metal containers for disposal. Flush area with water spray after clean-up. S-360 B MSDS rtf Page 2 of 4 Rev Date

7 7. HANDLING AND STORAGE PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE: Store in a cool, dry, well ventilated area in closed containers. Separate from acids, acidic catalysts, and oxidizers. OTHER PRECAUTIONS: Follow all MSDS/label precautions even after container is emptied because it may retain product residues. 8. EXPOSURE CONTROL/PERSONAL PROTECTION RESPIRATORY PROTECTION: Wear appropriate respirator complying with NIOSH and other appropriate regulations. VENTILATION: Follow OSHA or other applicable exposure guidelines. Use respirator protection based upon anticipated or actual exposure monitoring results. Local exhaust may or may not be sufficient. PROTECTIVE GLOVES: Impervious gloves recommended. EYE PROTECTION: Safety glasses with side shields (or goggles) as appropriate. OTHER PROTECTIVE CLOTHING OR EQUIPMENT: Where splashing is possible, wear protective apron WORK / HYGIENIC PRACTICES: Use good personal hygiene when handling this product. Wash hands after use, before eating, smoking, or using the toilet. ENGINEERING CONTROLS: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Ground and bond all mechanical transfer equipment to avoid static buildup and discharge (spark). Avoid open flame, smoking and sparks when handling of this product creates dust. Always add product to water to minimize dust in air. EXPOSURE GUIDELINES: Not Available 9. PHYSICAL AND CHEMICAL PROPERTIES SOLUBILITY IN WATER: SLIGHT APPEARANCE AND ODOR: Slight yellow coloration with amine-mercaptan like odor BOILING POINT: 400 PERCENT VOLATILE: 0 VAPOR PRESSURE: ND PH: ND EVAPORATION: Not Determined. MOLECULAR WEIGHT: POUNDS PER GALLON: ND VAPOR DENSITY: Not Determined SPECIFIC GRAVITY: ND MELTING POINT: FREEZING POINT: OTHER PROPERTIES: S-360 B MSDS rtf Page 3 of 4 Rev Date

8 10. STABILITY AND REACTIVITY STABLE: Stable INCOMPATIBILITY: Oxidizing materials and acids. HAZARDOUS DECOMPOSITION OR BY PRODUCTS: Carbon dioxides, carbon monoxides, and other hydrocarbons may be released. HAZARDOUS POLYMERIZATION: Will Not Occur 11. TOXICOLOGY INFORMATION Not Available 12. ECOLOGICAL INFORMATION Toxic to fish and other water organisms 13. DISPOSAL CONSIDERATIONS Dispose of in accordance with all Federal, State, and Local regulations. 14. TRANSPORTATION INFORMATION DOT CLASS: Amines, liquid, corrosive, n.o.s. (4,4-Methylenebiscyclohexanamine, Nonyl Phenol, Polyoxypropylenediamine) HAZARD CLASS: 8 UN NUMBER: UN 2735 PACKING: III GUIDE NUMBER: PROPER SHIPPING NAME: Amines, liquid, corrosive, n.o.s. (4,4-Methylenebiscyclohexanamine, Nonyl Phenol, Polyoxypropylenediamine) 15. REGULATORY INFORMATION All of the components of this material are either listed on the TSCA Inventory, or are not subject to notification requirements (exempt). This material may contain trace amounts of chemicals known in the state of California to cause cancer, birth defects, or other reproductive toxicity. 16. OTHER INFORMATION HMIS INFORMATION: HEALTH: 2 FLAMMABILITY: 1 REACTIVITY: 1 PROTECTIVE: X Disclaimer The information contained herein is based on the data available to us and is believed to be accurate. However, no warranty is expressed or implied regarding the accuracy of this data or the results to be obtained from the use thereof. We assume no responsibility for injuries from the use of the product described herein. S-360 B MSDS rtf Page 4 of 4 Rev Date

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET S-300 PART A RESIN 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION MANUFACTURER: PRODUCT NAME: PRODUCT NUMBER: UPC NUMBER: PREPARED BY: DATE PREPARED: 3/29/00 LAST REVISION: 4/6/99