THS74/75 Industrial Temperature & Humidity Transmitter. Operation Manual
|
|
|
- Olivia West
- 5 years ago
- Views:
Transcription
1 THS74/75 Industrial Temperature & Humidity Transmitter Operation Manual
2 1. Features 2. Security considerations 3. Installation 4. Connection 5. Display and LED instruction 6. Software setting and calibration operation steps 7. Maintenance and exception Oder Code: 1. Features 1.1 Metal quick coupling, repeatable to install. Compact design, good look and easy to install Capable of temperature compensation and linear adjustment. Capable of high anti-pressure, sensor with high accuracy and longterm stability. Option RS Applications Monitoring for industrial process / air conditioning / environmental ventilation control. Environmental monitoring for building / factory / clean room / Lab / weather station. Monitoring for storage room / freezer / agriculture / food industry. Temperature and humidity measuring in hospital / pharmaceutical industry / textile industry. PAGE:2 OF 59
3 2. Security considerations Please read this Specification carefully, prior to use of this, and keep the manual properly, for timely reference. Solemn Statement: This product can not be used for explosion-proof area. Do not use this product in a situation where human life may be affected. This product can not be used for explosion-proof area. Do not use this product in a situation where human life may be affected. EYC-TECH will not bear any responsibility for the results produced by the operators. Warning!! Installation and wring must be performed by qualified personnel in accordance with all applicable safety standards. This product must be operated under the operating conditions specified in manual to prevent equipment damages. Please using the product under the ordinary pressure, or it will influence safe problem. This product must be operated under the operating condition specified in this manual to prevent equipment damages. This product must be operated under the normally atmospheric condition to prevent equipment damages. To prevent products damage, always disconnect the power supply from the product before performing any wiring and installation. All wiring must comply with local codes of indoor wiring and electric installation rules. Please use crimp type terminal. To prevent personal injury, do not touch the moving part of product in operation. It may cause high humidity atmosphere during the product was breakdown. Please take safety strategy. PAGE:3 OF 59
4 3. Installation 3.1 Dimension 3.2 Installation Base Installating cable gauge Fitting thread PAGE:4 OF 59
5 3.3 Option accessory 1. Fixed type Order code Name Desciption Dimension Metal Flange Material Stainless Steel 304 Din-rail board HS-S Material Stainless Steel 304 L board Material SPCC+Zinc plated 2. Filter Order code Name Description Features SUS sintered filter MaterialSUS316L Sinter type HD40μm OD12mm L34.5mm Excellent filterable, and pollution, corrosion and pressure resistance. Max. Temper.200 max PAGE:5 OF 59
6 Metal grid filter MaterialSUS304 OD12mm L32mm Non-protection. Fast response With high temperature resistance, and well permeability Max. temper.200 max 3. Radiation shield Order code Name Description Dimension Radiation shield THSA-0303 Material PS+SPCC 4. Connection 4.1 Wiring 4.2 Communication connection PAGE:6 OF 59
7 5. Display and LED instruction 5.1 LCM display 5.2 LED Indication 1. Power LED P, Green light ON 2. RS-485: LED P, Red light ON 3. LED light position statement: PAGE:7 OF 59
8 6. Software and calibration operation step 6. 1 Application program statement Setting RS-485 connection Scan RS-485 connection Setting RS-485 ModBus Protocol Display and save data Choose parameter of Output Temperature Calibration with two points Humidity Calibration with two points Temperature Calibration with signal points Humidity Calibration with signal point Restore factory setting of signal/two point(s) Temperature Calibration with more points Humidity Calibration with more points Restore factory setting of more points 57 PAGE:8 OF 59
9 PAGE:9 OF 59
10 PAGE:10 OF 59
11 a. b. c. d. e. PAGE:11 OF 59
12 a. a. a. b. PAGE:12 OF 59
13 PAGE:13 OF 59
14 a. b. PAGE:14 OF 59
15 a. b. PAGE:15 OF 59
16 PAGE:16 OF 59
17 a. a. a. b. PAGE:17 OF 59
18 PAGE:18 OF 59
19 c. b. a. PAGE:19 OF 59
20 PAGE:20 OF 59
21 PAGE:21 OF 59
22 PAGE:22 OF 59
23 PAGE:23 OF 59
24 PAGE:24 OF 59
25 PAGE:25 OF 59
26 a. b. c. d. e. PAGE:26 OF 59
27 PAGE:27 OF 59
28 PAGE:28 OF 59
29 PAGE:29 OF 59
30 PAGE:30 OF 59
31 PAGE:31 OF 59
32 PAGE:32 OF 59
33 PAGE:33 OF 59
34 PAGE:34 OF 59
35 PAGE:35 OF 59
36 PAGE:36 OF 59
37 PAGE:37 OF 59
38 PAGE:38 OF 59
39 PAGE:39 OF 59
40 PAGE:40 OF 59
41 PAGE:41 OF 59
42 PAGE:42 OF 59
43 a. b. c. PAGE:43 OF 59
44 a. b. c. d. PAGE:44 OF 59
45 PAGE:45 OF 59
46 a. b. PAGE:46 OF 59
47 b. a. PAGE:47 OF 59
48 c. d. PAGE:48 OF 59
49 a. b. c. PAGE:49 OF 59
50 d. e. PAGE:50 OF 59
51 PAGE:51 OF 59
52 b. PAGE:52 OF 59
53 b. a. PAGE:53 OF 59
54 c. d. PAGE:54 OF 59
55 a. b. c. PAGE:55 OF 59
56 d. e. PAGE:56 OF 59
57 a. b. d. That restore more points temperature of factory setting is done. PAGE:57 OF 59
58 a. b. e. That restore humidity of factory setting is done. PAGE:58 OF 59
59 7. Inspection and maintenance 1. Maintenance Since this product is inspected and calibrated for high accuracy at the factory before shipment, no calibration on the installation site is necessary when this product is installed. For inspection and maintenance follow the instructions below 1) Periodic inspection Periodically inspect this product for its sensing accuracy, and clean the cover. Set the period between inspections based on atmospheric dust and other contaminants in the installation environment. 2) Sensor maintenance Do not damage sensor surface during maintenance process. 3) Troubleshooting If any problem occurs during operation, refer to the table below for appropriate solutions. PAGE:59 OF 59
TEMPERATURE and HUMIDITY TRANSDUCER SUPPLIED P18L TYPE USER S MANUAL. from a CURRENT LOOP
TEMPERATURE and HUMIDITY TRANSDUCER SUPPLIED from a CURRENT LOOP P18L TYPE USER S MANUAL 1 2 Contents 1. Application... 2 2. Basic requirements, operational safety... 2 3. Installation... 2 3.1. Assembly...
Description. Specifications and Ordering Information Proximitor Sensor / interface module/ VDC Housings
Specifications and Ordering Information Proximitor Sensor / interface module/ VDC Housings R Description Although Proximitor and interface are rugged by design, these units and their electrical connections
The Do s and Don ts of Pressure Transducers
The Do s and Don ts of Pressure Transducers ABSTRACT When specifying a pressure transducer for a process measurement, a number of items have to be considered. Some of the more important ones are discussed
TEMPERATURE and HUMIDITY TRANSDUCER SUPPLIED P18L TYPE USER S MANUAL. from a CURRENT LOOP
TEMPERATURE and HUMIDITY TRANSDUCER SUPPLIED from a CURRENT LOOP P18L TYPE USER S MANUAL Contents 1. Application... 2 2. Basic requirements, operational safety... 2 3. Installation... 2 3.1. Assembly...
VISTA400 REMOVABLE FOOT PLATE. Instructions For Use. Step on yellow pedals to close and open legs to go around chairs & ambulate.
VISTA400 Instructions For Use Squeeze the yellow bar & push down/pull up to activate pneumatic stand assist. Step on yellow pedals to close and open legs to go around chairs & ambulate. Pull yellow levers
Signet 2850 Conductivity/Resistivity Sensor Electronics and Integral Systems
Signet 2850 Conductivity/Resistivity Sensor Electronics and Integral Systems Features Certificate of calibration supplied with all sensors. Universal Mount Custom cell constant programmed into the electronics.
Instruction Manual Aerogen, Inc. Part No. AG-AL1010 Rev. C
Instruction Manual 2004 Aerogen, Inc. Part No. AG-AL1010 Rev. C Table of Contents Introduction... 3 System description... 4 Warnings... 5 Cautions... 5 Electromagnetic Susceptibility... 5 Symbols... 6
Signet 2850 Conductivity/Resistivity Sensor Electronics and Integral Systems with PVDF Sensor
Signet 2850 Conductivity/Resistivity Sensor Electronics and Integral Systems with PVDF Sensor Features Test certificate supplied with all sensors Universal Mount Custom cell constant programmed into the
Goniometer series 400
User s Manual Huber Diffraktionstechnik GmbH & Co. KG Sommerstrasse 4 D - 83253 Rimsting Phone +49 (0) 8501 6878-0 Fax +49 (0) 8051 6878-10 info@xhuber.com www.xhuber.com series 400 Manual 400_en-A05 2005
With extended functionality the sensors are also applicable for the detection of air bubbles.
Technical Data Sheet The sensor series designed as clamp-on-sensors detect the flow rate of liquids in plastic tubes of different diameters or materials within a few milliseconds. With extended functionality
4-20 ma Pressure Transducer
4-20 ma Pressure Transducer 56410099 Copyright 2017 Durham Geo Slope Indicator All Rights Reserved. This equipment should be installed, maintained, and operated by technically qualified personnel. Any
There are many varieties of particulate pollutants in our homes and offices. Ones from outside include industrial
Model: IAQ Indoor PM2.5 -PM2.5 Particulate matter (PM) is a particle pollution, which is produced in a great number of ways that can be classified into either mechanical or chemical processes. Traditionally,
BROEN UNIFLEX FITTINGS FOR NON-BURNING 2.0 GASES / VACUUM
BROEN UNIFLEX FITTINGS FOR NON-BURNING 2.0 GASES / ACUUM LAB TABLE OF CONTENTS Content Page Table of Content 2 Product Overview 3 BROEN UniFlex TM BASIC 4-5 Fittings for Non-burnig 2.0 Gases/acuum Turret
Instruction Manual. DSRn. Density & Sound Velocity Transducers
Instruction Manual DSRn Density & Sound Velocity Transducers Instruction Manual DSRn Density & Sound Velocity Transducers While every precaution has been taken in the preparation of this document, Anton
RaySafe i3 INSTALLATION & SERVICE MANUAL
RaySafe i3 INSTALLATION & SERVICE MANUAL 2017.06 Unfors RaySafe 5001104-1.1 All rights are reserved. Reproduction or transmission in whole or in part, in any form or by any means, electronic, mechanical
Technical Data Sheet SONOFLOW CO.55 V1.0
Technical Data Sheet SONOFLOW CO.55 V1.0 The sensor series SONOFLOW CO.55 V1.0 designed as clamp-on-sensors detect the flow rate of liquids in plastic tubes of different diameters or materials within a
Compressor Accessories
Compressor Accessories Series 11 Superior quality for superior performance COMPRESSOR OIL Description MINERAL 11.1100 1 litre container 11.1400 4 litre container SYNTHETIC 11.1200 1 litre container 11.1500
Technical Data Sheet SONOFLOW CO.55/xxx(H) V2.0
The sensor series SONOFLOW CO.55/xxx V2.0 designed as clamp-on-sensors detect the flow rate of liquids in plastic tubes of different diameters or materials within a few milliseconds. For applications on
Side Channel R ing Blower
Side Channel R ing Blower ------------------------------------- INSTRUCTION MNUL ------------------------------------ RB20../ 30../ 40../ 50../ 60 / 80.. SERIES CONTENT PGE 1. SFETY REQUIREMENT... 1 2.
ER75 Electro-Acoustic Ear Simulator. Operating Manual
ER75 Electro-Acoustic Ear Simulator Operating Manual ABOUT THIS MANUAL READ THIS OPERATING MANUAL BEFORE ATTEMPTING TO USE THE INSTRUMENT. Amplivox Ltd. 6 Oasis Park, Eynsham Oxfordshire, OX29 4TP United
SED2 VFD NEMA Type 3R Bypass, and Type 3R Harsh Environment (3RHE) Bypass
Document No. 129-405 SED2 VFD NEMA Type 3R Bypass, and Type 3R Harsh Environment (3RHE) Bypass Product Description The SED2 VFD NEMA Type 3R/3RHE, Bypasses are companion packages for the family of SED2
Gewässer Umwelt Schutz
Gewässer Umwelt Schutz GmbH CUW Oil protector Assembly instructions 2 Foreword Always study this assembly instruction manual before Installation and initial operation. This assembly instruction manual
Most of the Conductivity/Resistivity electrodes used with the 2850 can be installed into standard 3 /4 in. (NPT or ISO 7-R 3 /4) fittings.
InLine Installation Most of the Conductivity/Resistivity electrodes used with the 850 can be installed into standard /4 in. (NPT or ISO 7R /4) fittings. The 8505X models are designed for integral systems,
866-362-2691 www.westernfirstaid.com LAWS, CODES AND... Occupational Safety and Health Administration OSHA 29 CFR 1910.151, Subpart k, Section c Where the eyes or body of any person may be exposed to injurious
HI Total Acidity Mini Titrator for Water Analysis
HI 84530 Total Acidity Mini Titrator for Water Analysis Piston Driven Pump with Dynamic Dosing The HI 84530 incorporates dynamic dosing to provide precison titrant delivery. Dynamic dosing adjusts the
Lift Accessories. For Hunter Wheel Alignment Lift Racks. Includes Inflation Stati and Fully Inte Alignment Features
Lift Accessories For Hunter Wheel Alignment Lift Racks Includes Inflation Stati on and Fully Inte grated Alignment Features PowerSlide System RX-Series & L441 / L444 Lifts The PowerSlide locking mechanism
XRS-5/XRS-5CTRANSDUCER
XRS-5/XRS-5CTRANSDUCER Instruction Manual PL-590 January 2001 33455900 Rev. 2.0 RS-5 TRANSDUCER Safety Guidelines Warning notices must be observed to ensure personal safety as well as that of others, and
Frequently Asked Questions
Frequently Asked Questions How does the SMRT-Y work? The SMRT-Y sensor accurately measures the moisture level in the soil. When the soil is dry, the SMRT-Y allows the irrigation controller to water as
Simrad SP90/SX90/SU90
Simrad SP90/SX90/SU90 Transducer replacement procedure This document explains how to replace the transducer on a Simrad SP90, SX90 and SU90 Series hull unit. Note This procedure is not intended for end
Technical support: +49 (0)7223 /
ISO 9001 certified Technical support: +49 (0)7223 / 9493-0 Technical description ADDIVARIOUS PX 901 Screw terminal board 8 th edition 08/2000 Copyright All rights reserved. This manual is intended for
ADAPTER IECEx-ATEX, RNC, IP66 / 68, NICKEL PLATED BRASS
ADAPTER IECEx-ATEX, RNC, IP66 / 68, NICKEL PLATED BRASS Anamet IECEx-ATEX adapter fitting, type RNC and RAC, nickel plated brass Type RNC IECEx-ATEX approved 45 or 90 nickel plated brass adapter, male
Process lock Dalton. Use: Features: Door and hatches
Process lock Dalton Use: Door and hatches Features: Small and robust Integrated with Eden High enclosure classification IP Withstands harsh enviroments Low current consumption Status information with LED
PORTO 2 VENT CPAP OS. Operator s Manual. PORTO 2VENT CPAP OS System Operator s Manual Part Number Rev I
PORTO 2 VENT CPAP OS Operator s Manual 1 2 TABLE of CONTENTS 1. Introduction 3. Operating Instructions 1a. Definitions 3a. Setting the CPAP Level 1b. General Description 3b. Applying the Breathing Circuit
RLS /M MX SERIES
The RLS/M MX series of burners are characterised by a modular monoblock structure that means all necessary components can be combined in a single unit thus making installation easier, faster and, above
Capacitive Sensors 17
Capacitive Sensors 17 Capacitive Sensors WERNER'S 17 series capacitive sensors offer fully integrated reliable solutions that address the complex and difficult signal processing challenges of high demand
Installation Instructions
Instructions Midrange Self-Contained Unit Accessory: Indeeco Electric Heat Used with Models SCWJ, SCRJ 3, 5, 7.5, 10, 12, and 15 Tons AO and later design sequence SAFETY WARNING Only qualified personnel
Installation, operation and service manual BMA 04
BMA 04 Please read this manual carefully before installing and using the BMA 04 safe measuring coupling. Wigersma & Sikkema warranty obligations do not apply in case of non-observance of this manual. 1
Advanced in vitro exposure systems VITROCELL VC 1 SMOKING MACHINE
Advanced in vitro exposure systems VITROCELL VC 1 SMOKING MACHINE Options for e-cigarettes VITROCELL VC 1 SMOKING MACHINE Manual smoking machine with high tech features square puff profiles higher puff
Allergy Reliever. User Manual. AR 1 Series
Allergy Reliever User Manual AR 1 Series Content Introduction Parts Warnings Using the Allergy Reliever Battery Information Specification Maintenance and Cautions Explanation of Symbols on Unit 2 3 4 5
Active Imaging TM transducers: Active Imaging 3-IN-1 Active Imaging SideScan
Active Imaging TM transducers: Active Imaging 3-IN-1 Active Imaging SideScan Installation manual ENGLISH www.simrad-yachting.com www.lowrance.com 1 Preface Warning: It is your sole responsibility to install
SED2 Variable Frequency Drives Conventional Bypass (C-Bypass) Options
SED2 Variable Frequency Drives Conventional Bypass (C-Bypass) Options Product Description The SED2 Conventional Bypass (C-Bypass) Options are companion packages for the family of SED2 Variable Frequency
TWISTING STAIR STEPPER WITH BANDS
TWISTING STAIR STEPPER WITH BANDS NO. 068 USER MANUAL IMPORTANT! Please retain owner s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN
LEARNING TO USE YOUR FIRST HEARING AID
Hearing Aid User Manual PHLHA46 LEARNING TO USE YOUR FIRST HEARING AID Your hearing aid cannot return your level of hearing to normal or halt further hearing deterioration, but proper use of your hearing
ULTR A SERIES G7-S75
ULTR A SERIES G7-S75 2 PROPER USAGE 1. Do not exceed weight limits of the exercise device. 2. If applicable, set safety stops to appropriate height. 3. If applicable, adjust seat pads, leg pads, foot pads,
Datasheet BR Series UL489/CSA C22.2 No.5-02 (Branch rated) Circuit Breakers UL1077/CSA C22.2 No.235 Supplementary Protectors
Datasheet BR Series /CSA C22.2 No.5-02 (Branch rated) Circuit Breakers UL1077/CSA C22.2 No.235 Supplementary Protectors NEW Compared to traditional fuse installation, the /CSA C22.2 No.5-02, UL1077/CSA
Getting started with Wireless Fitting
Quick Guide Getting started with Wireless Fitting Over the years, hearing aid manufacturers have introduced more cables to the clinic with the launch of new hearing aids. For dispensers, this has become
IECEx Certificate of Conformity CESI
Description of the equipment: Luminaries (pendant lighting fixtures) series EV.., EW.., EWA.., are used in hazardous area, indoor and/or outdoor, where inflammable or explosive vapours gas or dust are
--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB
Translated English of Chinese Standard GB15980-1995 Translated by: www.chinesestandard.net Email: Sales@ChineseStandard.net ICS 11.120.20 C 59 National Standard of the People s Republic of China GB Hygienic
Intrinsically Safe Ultrasonic Testers: How important are they?
Intrinsically Safe Ultrasonic Testers: How important are they? Introduction The use of ultrasonic devices for non-destructive testing (NDT) has become more common in recent years as equipment has increased
Easy assembly with standard tools. Fully insulated for direct mounting to steel panels
Cam-Lok J Series Connectors or NEMA 4 Cam-Lok J Series Connectors are specifically designed to meet the needs of demanding portable applications. J Series Plugs and Receptacles are the proven industry
Liquid level transmitter Type AKS 41 / 41U REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Liquid level transmitter Type AKS 41 / 41U REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction........................................................................................3
Dental ConeBeam Computed Tomography (CBCT) X-ray Systems
Dental ConeBeam Computed Tomography (CBCT) X-ray Systems PROPOSED REVISIONS TO 4732.XXXX, 1.0 4732.#### DENTAL CONEBEAM COMPUTED TOMOGRAPHY (CBCT) X-RAY SYSTEMS; STATIONARY AND MOBILE. Subpart 1. Applicability.
Advanced in vitro exposure systems
Advanced in vitro exposure systems VITROCELL VC 1/7 SMOKING MACHINE Features for e-cigarettes VITROCELL VC 1/7 SMOKING MACHINE Linear smoking machine with high tech features square puff profiles higher
Cerus P-Series General Specifications Section 15172
Cerus P-Series s Section 15172 Variable Frequency Drives PART 1-GENERAL 1.01 SECTION INCLUDES A. Variable Frequency Drive(VFD) 1.02 RELATED SECTIONS A. Section 16195 1.03 REFERENCES A. NEMA250 B. EN 50178
Hyquest Solutions Pty Ltd
INSTRUCTION MANUAL FIELD CALIBRATION DEVICE MODELS FCD 653, FCD 314 & FCD 730 QUALITY SYSTEM ISO: 9001 CERTIFIED HYQUEST SOLUTIONS PTY LTD PO BOX 332, LIVERPOOL B.C NSW 1871, AUSTRALIA Phone:(Int.) 612
Preparation and Installation of the SANITRX / SANITRX LP (IS) Rupture Disc for Use With Industry Standard Ferrules
Preparation and Installation of the SANITRX / SANITRX LP (IS) Rupture Disc for Use With Industry Standard Ferrules GEP-6063 Rev. T 102335 Ref. I.D.: 12978 WARNING USER SHOULD READ AND THOROUGHLY UNDERSTAND
HarmonicGuard Series Drive-Applied Harmonic Filter Installation, Operation, and Maintenance Manual
HarmonicGuard Series Drive-Applied Harmonic Filter Installation, Operation, and Maintenance Manual TCI, LLC W132 N10611 Grant Drive Germantown, Wisconsin 53022 Phone: 414-357-4480 Fax: 414-357-4484 Helpline:
LeadCare BLOOD LEAD ANALYZER. Quick Reference Guide
LeadCare II BLOOD LEAD ANALYZER Quick Reference Guide Precautions Precautions Caution The LeadCare II Blood Lead Analyzer is a CLIA-waived device. Facilities that perform tests with the LeadCare II System
Table of Contents. Introduction Indications For Use Contraindications Warnings Precautions...5
User Manual 3 Table of Contents Introduction....4 1. Indications For Use...4 2. Contraindications...4 3. Warnings...5 4. Precautions...5 5. Adverse Reactions...5 6. Step-By-Step Instructions...6 A. Contents...6
ORIFICE FLOW METERS WITH CHAMBERS MEASURING RINGS
Bulletin E79 rev0 02/03/03 ORIFICE FLOW METERS WITH CHAMBERS MEASURING RINGS POP-U-S SERIES FEATURES UNI PN6 flanges: iron Chamber measuring rings: iron Disc: AISI30 Max. operating temperature: 00 C Max.
HI Total Alkalinity Mini Titrator for Water Analysis
HI 84531 Total Alkalinity Mini Titrator for Water Analysis Piston Driven Pump with Dynamic Dosing The HI 84531 incorporates dynamic dosing to provide precison titrant delivery. Dynamic dosing adjusts the
Air Preparation Equipment
FRLS Improve system efficiency Side-by-side and stacking units available Modular design for easy connection and maintenance Variety of port sizes from #10-30 to 1" NPT pp. 170-174 FILTERS Capture solid
Ultrasonic Transducers
Ultrasonic Transducers XPS10/15F Operating Instructions 08/2013 Safety Guidelines: Warning notices must be observed to ensure personal safety as well as that of others, and to protect the product and the
Instruction Manual January 2001 PS 10/15 F SERIESTRANSDUCER
XPS 10/15 F SERIESTRANSDUCER Instruction Manual January 2001 PS 10/15 F SERIESTRANSDUCER Safety Guidelines Warning notices must be observed to ensure personal safety as well as that of others, and to protect
Solutions at GE Inspection Technologies
Solutions at GE Inspection Technologies Business Overview Paul A. Meyer Our Company A global leader in technology-driven inspection solutions that deliver productivity, quality, and safety to our customers
Low Row. User manual E S S E N T I A L S T R E N G T H
E L E M E N T E S S E N T I A L S T R E N G T H User manual 1 The identification plate of and manufacturer, affixed on the back panel of the weight stack, gives the following details: A B C D E Name and
Description. Modell-Nr Airless ProfessionalLine. According to ISO 1167 ASTM D 1598 ASTM D Simple and safe operation. Reliable test results
Modell-Nr. 1720 Airless ProfessionalLine According to ISO 1167 ASTM D 1598 ASTM D 1599 Description The internal pressure creep test is a test procedure for determining the strength of thermoplastic pipes.
HI Total Alkalinity Mini Titrator for Water Analysis
HI 84531 Total Alkalinity Mini Titrator for Water Analysis Piston Driven Pump with Dynamic Dosing The HI 84531 incorporates dynamic dosing to provide precison titrant delivery. Dynamic dosing adjusts the
MEDIUM-FLOW PNEUMOTACH TRANSDUCER
MEDIUM-FLOW PNEUMOTACH TRANSDUCER SS11LA for MP3x and MP45 System TSD117 & TSD117-MRI for MP150/MP100 System RX117 Replacement Airflow Head See also: AFT series of accessories for airflow and gas analysis
HI Titratable Acidity Mini Titrator for Fruit Juice Analysis
HI 84532 Titratable Acidity Mini Titrator for Fruit Juice Analysis Piston Driven Pump with Dynamic Dosing The HI 84532 incorporates dynamic dosing to provide precison titrant delivery. Dynamic dosing adjusts
3. Dimensions, weights Placement and Assembly Pressure drops Noise data Material... 14
These technical specifications state a row of manufactured sizes and models of smoke extraction dampers - single (further only dampers) SEDS-L. It is valid for production, designing, ordering, delivery,
Double Block and Bleed ball valve have evolved to replace the process of bolting together individual valves to provide dual isolation.
Bleed valve Double Block and Bleed ball valve have evolved to replace the process of bolting together individual valves to provide dual isolation. This new assembly provides great savings in weight, space
Quick Sealing with a Twist to Connect Actuation Method
- Finger tighten seals up to 689 bar (10,000 psi) for pneumatic and hydraulic testing - Safe and Reliable leak tight connections to male and female threads - Eliminate thread damage, sealant and wrenches
Dental Extraoral X-ray Systems
Dental Extraoral X-ray Systems PROPOSED REVISIONS TO 4732.XXXX, 1.0 4732.#### DENTAL EXTRAORAL X-RAY SYSTEMS; STATIONARY AND MOBILE. Subpart 1. Applicability. A registrant s x-ray system used for dental
Liquid ring vacuum pumps single-stage
Liquid ring vacuum pumps single-stage LOH 20103, LOH 20107 Pressure range: Suction volume flow: 150 to 1013 mbar 7 to 58 m³/h CONSTRUCTION TYPE Sterling SIHI liquid ring vacuum pumps are displacement pumps
PROBE CONDITIONING SYSTEM- P/N FOR BATCH FURNACES
December 3, 2007 PROBE CONDITIONING SYSTEM- P/N 13011 FOR BATCH FURNACES INSTRUCTION MANUAL M4505E SSi SUPER SYSTEMS INC. 7205 Edington Drive Cincinnati, Ohio 45249 1-513- 772-0060 1-800- 666-4330 FAX
HI Titratable Acidity Mini Titrator for Fruit Juice Analysis
HI 84532 Titratable Acidity Mini Titrator for Fruit Juice Analysis Piston Driven Pump with Dynamic Dosing The HI 84532 incorporates dynamic dosing to provide precison titrant delivery. Dynamic dosing adjusts
AIR COOLED CONDENSERS
AIR COOLED CONDENSERS SELECTION GUIDE Data Aire, Inc. 230 W. BlueRidge Ave. Orange, CA 92865 www.dataaire.com TABLE OF CONTENTS DARC - Standard outdoor condenser general description... 3 DARC LD - Low
PROFIBUS Products Overview P PROFIBUS Converter/Repeater P PROFIBUS Gateway P6-3-1
.1. Overview P-1-1.2. PROFIBUS Converter/Repeater P-2-1.3. PROFIBUS Gateway P-3-1.4. PROFIBUS Remote I/O Modules P-4-1.5. PROFIBUS I/O Unit P-5-1 Overview.1. Overview PROFIBUS (Process Field Bus) is a
TWISTING STAIR STEPPER WITH BANDS NO. 068 USER MANUAL
TWISTING STAIR STEPPER WITH BANDS NO. 068 USER MANUAL IMPORTANT: Read all instructions carefully before using this product. Retain owner s manual for future reference. For customer service, please contact:
RLS/E-EV MX SERIES. Low NOx Modulating Dual Fuel Burners FIRING RATES
The RLS/E-EV MX series of burners covers a firing range from 350 to 2400 kw, and they have been designed for use in low or medium temperature hot water boilers, hot air or steam boilers, diathermic oil
S E L E C T I O N. Adjustable Bench. User manual. All equipment T H E S T R E N G T H E V O L U T I O N
S E L E C T I O N T H E S T R E N G T H E V O L U T I O N User manual All equipment 1 Contents Identification of the manufacturer and equipment... 3 Description of the equipment... 4 Technical data...
St. Jude Medical 8-Channel Adapter. Clinician's Manual
St. Jude Medical 8-Channel Adapter Clinician's Manual CAUTION: Federal (USA) law restricts this device to sale by or on the order of a physician. For U.S. California Only: Proposition 65, a State of California
WNK5 Series High Precision Pressure Transmitter
WNK5 Series High Precision Pressure Transmitter WNK5 series pressure transmitter is the high performance pressure transmitters provided by nhui WNK Electronic Engineering Co., Ltd. It transforms the physical
Signet 2850 Conductivity/Resistivity Sensor Electronics * *
Signet 850 Conductivity/Resistivity Sensor Electronics *-850.090-* English -850.090- Rev. H 06/ English SAFETY PRECAUTIS. Depressurize and vent system prior to installation or removal.. Confi rm chemical
Agilent 1220 Infinity LC System Performance Specifications
IET International Equipment Trading, Ltd. www.ietltd.com Proudly serving laboratories worldwide since 1979 CALL +847.913.0777 for Refurbished & Certified Lab Equipment Agilent 1220 Infinity LC System Performance
API. Defined Procedure. for. Ultrasonic Thickness Measurement API-UT-21
API Defined Procedure for Ultrasonic Thickness Measurement API-UT-21 This Procedure Defines the Recommended Ultrasonic Methods and Techniques for Thickness Measurements Page 1 1.0 PURPOSE 1.1 This procedure
ULTR A SERIES G7-S23
ULTR A SERIES G7-S3 PROPER USAGE 1. Do not exceed weight limits of the exercise device.. If applicable, set safety stops to appropriate height. 3. If applicable, adjust seat pads, leg pads, foot pads,
ULTR A SERIES G7-S13
ULTR A SERIES G7-S13 PROPER USAGE 1. Do not exceed weight limits of the exercise device.. If applicable, set safety stops to appropriate height. 3. If applicable, adjust seat pads, leg pads, foot pads,
Fundamentals of Pressure Transducers
print close Fundamentals of Pressure Transducers (Unpublished) Hydraulics & Pneumatics Alan Hitchcox Tue, 2013 09 17 (All day) Pressure is a key factor in almost every fluid power circuit. Pressure transducers
AS Medizintechnik GmbH Sattlerstraße Tuttlingen Germany
Before using the intramedullary. please ensure that it is functioning properly and free of any defects. In addition, please follow these instructions, including the information regarding repair as wellas
Compatible with the following products TENS. Replacement Pads. User Manual. Last revised: V Last revised: V
Compatible with the following products TENS Replacement Pads User Manual Last revised: V11-160923 Last revised: V4-170619 Contents Introduction 2-3 Parts 3 General Warnings and Safety 4-10 Using your TENS
Comfortmax Thermax Hot/Cold Water Circulation System. Instructions for Use
Comfortmax Thermax Hot/Cold Water Circulation System Instructions for Use THIS DEVICE CAN BE COLD ENOUGH TO CAUSE SERIOUS INJURY. SERIOUS ADVERSE REACTIONS AND SAFETY HAZARDS MAY OCCUR WHEN USING THIS
JEFFERSON Cabinet Style Transformers Three-Phase 15 to 1000 KVA
JEFFERSON Cabinet Style Transformers Three-Phase 15 to 1000 KVA TYPICAL APPLICATIONS All general loads, indoors or outdoors, including lighting, industrial & commercial Schools Hospitals Factories Office
Surge Arrestor. System The low-voltage surge arrestors are equipped with metaloxide varistors installed in robust and aging-resistant ceramic
As a specialist for safety interfaces, EFEN provides surge arrestors for power distribution grids that respond to power surges within nanoseconds, thereby reliably preventing damage. System The low-voltage
Electric Desk Adjustable
Electric Desk Adjustable Instructions / Manual / Maintenance SAFETY NOTICE Failure to comply with this instruction manual may result in injury or damage of the product. Please keep the product far away
Off-line filter system
Off-line filter system 15 NFT / 35 NFT RE 51431-B/03.10 Replaces: -.- English Operating instructions The data specified above only serve to describe the product. No statements concerning a certain condition
747 Series Stopper Plugs Cable Gland Accessories Flameproof.
747 Series Stopper Plugs Flameproof. Class I, Groups, A, B, C, D Type 4X; Ex d II Component Equipment Stopper plug is designed for use from the outside of the Idea for use on flameproof electrical equipment
COST, PROCESS & QUALITY IMPROVEMENT
COST, PROCESS & QUALITY IMPROVEMENT - Finger tighten seals up to 10,000 psi (689 bar) for pneumatic and hydraulic testing - Safe and Reliable leak tight connections to male and female threads - Eliminate
Humidity Measurement in H 2 O 2 Bio-Decontamination
Humidity Measurement in H 2 O 2 Bio-Decontamination Relative Saturation as the Key Vaisala Meet the Presenters Sanna Lehtinen Product Manager at Vaisala with 20 years of experience in life science applications