Wipers. Product Description: Part Numbers: Wipers. Imperial Seals
|
|
- Elisabeth Douglas
- 5 years ago
- Views:
Transcription
1 Imperial Seals Materials: Temp. Range Polyurethane -54 C to 105 C Highly Saturated Nitrile -40 C to 160 C Viton /Fluorocarbon -26 C to 204 C PEEK -70 C to 260 C Hytrel -54 C to 149 C Nitrile -40 C to 120 C DT D DS DX AN K H C Additional style such as Seal Guard, Trailmobile and Hyster are available upon request. Product Description: are primarily designed to stop contaminants from entering a cylinder on the rod, however, they can also act as a secondary rod seal. If contaminants were allowed to enter the cylinder it could lead to damage of your rod and/ or the damage of other sealing components. A properly selected wiper could help reduce the need for unscheduled maintenance and even increase the time between maintenance cycles. It is important to determine the correct style and material for your application. Hi-Tech Seals standard wiper material is urethane, however, Nitrile, HNBR, Viton, PEEK and Hytrel are available. Things that should be considered when selecting the material of your wiper include: required abrasion resistance, elasticity, resilience and fluid compatibility. s: W Wiper Prefix - Material (if other than Urethane) (Nominal) Example: WAN Urethane AN-Style Wiper - Gland with 1-1/4 Nom. I.D. 21
2 Imperial Seals DT, D, DS and DX C R Max. B D A DT Wiper - one piece snap-in type rod wiper designed for medium duty applications. O.D. lip provides improved O.D. ingression resistance. RL wiper lip reduces apparent rod seal leakage with equivalent ingression resistance to a sharp lip wiper. DT, D, DS and DX are all available in the sizes listed below. WD prefix most commonly represents Hi-Tech Seals DT style wiper. * WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD * WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD
3 Imperial Seals DT, D, DS and DX DT D DS DX DT, D, DS and DX are all available in the sizes listed below. WD prefix most commonly represents Hi-Tech Seals DT style wiper. For specific styles or materials please contact Hi-Tech Seals. * WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD * WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD
4 Imperial Seals AN-Style C R Max. B D A AN Wiper Light duty snap-in wiper that will retrofit into glands prescribed in MS WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN
5 Imperial Seals AN-Style WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN WAN
6 Imperial Seals K-Style C R Max. B D A K Style Wiper - one piece snap-in type rod wiper designed for light duty application. Secondary U-Cup x 1/64 Chamfer WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK
7 Imperial Seals H-Style C R Max. H Style Wiper one piece snap-in type rod wiper designed for light duty application. This style also acts as a secondary rod seal. The U-Cup lip provides a reduction in apparent rod seal leakage while maintaining equivalent ingression resistance to a sharp lip wiper. B D A WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH
8 Imperial Seals H-Style WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH
9 Imperial Seals Metal Encased C R Max. Metal Encased Wiper (WC)- Created with a Nitrile (N) or Urethane (U) element encased in a high quality steel metal retainer. The Metal Clad lip is rigid enough to handle tough scraping environments such as dry/wet mud and ice, yet sensitive enough to exclude fine dust and/or moisture. B A Material WC N WC U WC N WC N WC U WC N WC N WC U, N WC U WC N WC N WC U WC N WC N WC N WC N WC U WC N WC N WC N WC U WC U WC N WC N Material WC U, N WC U WC N WC N WC N WC N WC U WC N WC N WC N WC U,N WC U WC U WC U WC N WC U WC N WC U, N WC U WC U WC U WC N WC U WC U 29
10 Imperial Seals Metal Encased Material WC N WC N WC U WC U WC U WC N WC U WC N WC N WC U WC U WC N WC U WC U, N WC U WC U WC N WC U WC U WC U WC U WC U WC N WC N WC U WC U WC U Material WC N WC U WC U WC U WC U WC N WC U WC U WC U WC U WC U WC U WC U WC U WC U WC U WC U WC U WC U WC U WC U WC U WC U WC U WC U WC U WC U Metal encased wipers are typically stocked in Nitrile (N) or Urethane (U), however, additional materials and sizes are available. 30
11 Metric Seals Materials: Temp. Range Polyurethane -54 C to 105 C Nitrile -40 C to 120 C Highly Saturated Nitrile -40 C to 160 C Viton /Fluorocarbon -26 C to 204 C PEEK -70 C to 260 C Hytrel -54 C to 149 C D-Style (WDM) Stepped D-Style (WDM) H-Style (WHM) Stepped H-Style (WHM) Metal Clad (WCM) Metal Clad (WCM) Metal Clad (WCM) Pin Eye (PE) Metal Clad H-Style (WCM) Product Description: are primarily designed to stop contaminants from entering a cylinder on the rod, however, they can also act as a secondary rod seal. If contaminants were allowed to enter the cylinder it could lead to damage of your rod and/ or the damage of other sealing components. A properly selected wiper could help reduce the need for unscheduled maintenance and even increase the time between maintenance cycles. It is important to determine the correct style and material for your application. Things that should be considered when selecting the material of your wiper include: required abrasion resistance, elasticity, resilience and fluid compatibility. 185
12 Metric Seals D-Style H L Primary Design O.D. I.D. Interchangable Design WDM - I.D. O.D. L H Standard Material: Urethane I.D. O.D. L H WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM I.D. O.D. L H WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM
13 Metric Seals D-Style I.D. O.D. L H WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM I.D. O.D. L H WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM
14 Stepped D-Style H Metric Seals L2 L1 O.D. I.D. WDM - Standard Material: Urethane I.D. O.D. L1 L2 H I.D. O.D. L1 L2 H WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM I.D. O.D. L1 L2 H WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM WDM Additional sizes and styles are available upon request. 188
15 Metric Seals H-Style L H I.D. O.D. WHM - I.D. O.D. L H Standard Material: Urethane I.D. O.D. L H WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM I.D. O.D. L H WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM
16 Metric Seals Stepped H-Style H L2 L1 L2 L1 O.D. I.D. O.D. I.D. WHM - I.D. O.D. L1 L2 H Standard Material: Urethane I.D. O.D. L1 L2 H WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM I.D. O.D. L1 L2 H WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM WHM
17 Metric Seals Metal Clad H L O.D. I.D. Primary Design WCM - I.D. O.D. L H Interchangable Design Standard Material: Nitrile sealing element with a steel case. I.D. O.D. L H WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM I.D. O.D. L H WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM
18 Metric Seals Metal Clad I.D. O.D. L H WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM I.D. O.D. L H WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM WCM
19 Metric Seals H Metal Clad Pin Eye O.D. I.D. WCM - PE I.D. O.D. Height Standard Material: Urethane sealing element with a steel case. I.D. O.D. H WCM 15215PE WCM 16235PE WCM 20285PE WCM 25327PE WCM 36467PE WCM 45554PE WCM 50607PE WCM 65757PE WCM 65806PE WCM 65808PE WCM 70807PE WCM 7085PE WCM 70857PE WCM 70858PE WCM 71865PE WCM 75898PE WCM 80907PE WCM 80954PE WCM 80955PE WCM 80957PE WCM 85955PE I.D. O.D. H WCM 85957PE WCM PE WCM PE WCM PE WCM PE WCM PE WCM PE WCM PE WCM PE WCM PE WCM PE WCM PE WCM PE WCM PE WCM PE WCM PE WCM PE WCM PE WCM PE WCM PE WCM PE
Homogenous U-Cups. Product Description: Part Numbers: Homogenous U-Cups. Imperial Seals
Imperial Seals Material: Temp. Range Nitrile -40 C to 120 C Viton /Fluorocarbon -26 C to 204 C Neoprene -40 C to 121 C Product Description: Homogenous U-cups (block vees) are a non-loaded, single material
More informationBuffer Seals. Product Description: Part Numbers: Buffer Seals. Caterpillar Equivalent Styles. Imperial Seals R (TFE)
Imperial Seals Materials: Temp. Range 15% Glass, 5% Moly PTFE -73 C to 260 C 40% Bronze PTFE -73 C to 260 C Nylon -54 C to 121 C Low Temp. Nitrile -54 C to 116 C Nitrile -40 C to 120 C Viton /Fluorocarbon
More informationBuffer Seals. Product Description: Part Numbers: Buffer Seals. Caterpillar Equivalent Styles. Imperial Seals R (TFE)
Materials: Temp. Range 15% Glass, 5% Moly PTFE -73 C to 260 C 40% Bronze PTFE -73 C to 260 C Nylon -54 C to 121 C Low Temp. Nitrile -54 C to 116 C Nitrile -40 C to 120 C Viton /Fluorocarbon -29 C to 204
More informationSYMMETRICAL U-CUPS XP - X-PAC
X-PAC Loaded B-Lip - Symmetrical U-Cup XP - X-Pac Loaded B-Lip Symmetrical U-Cup X-PAC U-Cups are a very versatile reciprocating seal design, for use up to 350 bar (5,000 psi). The rubber expander creates
More informationP SERIES. 250 psi NFPA Pneumatic Cylinder TECHNICAL BROCHURE. Bore Sizes from 11/2 to 14
Actuation Solutions and Systems for the P SERIES 250 psi NFPA Pneumatic Cylinder Bore Sizes from 11/2 to 14 Actuation Solutions and Systems for the Design & Materials Temperature Ratings Low Temp. -54
More informationPEEK Columns & Guard Columns
INDEX PEEK Columns 103 Packing Devices 104 Column Coupler One-Piece Fingertight 105 In-Line Biocompatible Guard Column 106 Column End Plugs 107 Column End Plugs, Logotype 107 Disclaimer The maximum holding
More informationNeedle Valves. We deliver confidence through quality products
We deliver confidence through quality products INTRODUCTION NEEDLE VALVES SD range of Needle valves come in various sizes, sealing styles, end connections and stem types. They are available in bar stock
More informationPEEK SS Columns & Guard Columns
PEEK SS Columns & Guard Columns ~ Stainless Steel Analytical Columns ~ PEEK Columns ID 2.1, 4.0, 4.6 & 7.5 mm ~ Jour-Guard Cartridges Stainless Steel or PEEK ~ Stainless Steel End Fittings 1/4 OD Columns
More informationOriginal Chiksan Swivel Joints
Original hiksan Swivel Joints Steamlined bore minimizes flow restrictions Smooth, round bore design minimizes turbulence and pressure drop, Longsweep and TripleStep swivel joints have extralong radius
More informationservice Quality Delivery NorgrenExpress.com EXPrEss PLUS M/50 switches Mounts c/ Ø 25 to 63 mm ACT-31
M/50 switches switch P/N cable Material type M/50/lsU/*v pvc reed led M/50/eaN/*v pvc solid state sinking (NpN) led M/50/eap/*v pvc solid state sourcing (pnp) led Mounts bore Foot Mounts center support
More informationMisc: Interchange Coupling
Wing Style Interchange Coupling Misc: Interchange Coupling Series: W Interchange: Parker 6100 - Seals: Nitrile - Threaded sleeve allows connection/disconnection under pressure - Coupler: brass material
More informationBGS MODEL HP-165M FLUID END PARTS LIST
BGS MODEL HP-165M FLUID END PARTS LIST ITEM PART NUMBER REQ'D PART DESCRIPTION NO. QTY 001 BGS 008-024179-350 1 POWER FRAME 007 BGS 170-012005-353 1 PIPE PLUG, MAGNETIC 014 BGS 001-013059-999 1 FILTER/BREATHER
More informationRBL High-pressure AISI 316L stainless steel. For all fluids
RBL High-pressure AISI 316L stainless steel For all fluids Connections in high-pressure circuits carrying corrosive liquids and gases... Applications - High-pressure hydrogen circuits - High-pressure circuits
More informationS51 Series. Thread Together, Maximum Flow with Minimum Spillage
S51 Series S A F E W A Y H Y D R A U L I C S Document No. 7951 rev. 003 Thread Together, Maximum Flow with Minimum Spillage Minimum Spill, High Flow, Heavy-Duty Quick Coupling SafeWay s S51 Series is a
More informationSurgical Technique. VISIONAIRE Disposable Instruments for the LEGION Total Knee System
Surgical Technique VISIONAIRE Disposable Instruments for the LEGION Total Knee System VISIONAIRE and LEGION Disposable instrument technique* Note: All disposable instruments are interchangeable with the
More informationCheck Valves PRODUCT DESCRIPTION FEATURES & BENEFITS TECHNICAL SPECIFICATIONS
Check Valves PRODUCT DESCRIPTION CPI check valves are designed for high pressure applications where reverse flow and leakage must be kept to a minimum. Typical applications include engine, pump and compressor
More informationPROBLEMS AND SOLUTIONS
HIGH PRESSURE FLUID SYSTEM FIRE RESISTANT FLUIDS PROBLEMS AND SOLUTIONS General Electric HPU Westinghouse HPU HYDRAULIC FLUID USED Phosphate Ester Fluid Fyrquel Ð Reolube Ð Great Lakes/Forsythe Polyol
More informationPart 2: Internal Tri-Channel Connection. Nobel Biocare Compatible Components. Tri-Channel Internal Connection Implants
Select Part 2 Internal Tri-Channel Connection Replace Select NobelSpeedy Replace NobelReplace and compatible implants listed below Select Part 2 contains only the Tri-Channel Internal Connection compatible
More informationReplacement Parts for Raymond 8300, 8400 and 8500 Series
Replacement Parts for Raymond 8300, 800 and 800 Series Contents Quick Wheel Lookup Electrical System Components Battery Connector, Motor Controllers 6 Drive Unit & Drive Motor 8 Control Handle Arm, Throttle
More informationTECHNICAL SPECIFICATIONS. Carbon Steel / Stainless Steel One piece design BALL. Stainless Steel MAXIMUM OPERATING TEMPERATURE CRACKING PRESSURE
Check Valves PRODUCT DESCRIPTION CPI check valves are designed for high pressure applications where reverse flow and leakage must be kept to a minimum. Typical applications include engine, pump and compressor
More informationore Mounting XP 9/16" (02) 3/4" (04) $27.15 $28.85 $28.95 $ /16" (09) $ /2" (17) $38.80 $32.85 $ " (31) $60.85 $65.80 ore Mounti
The model number of all P consists of three alphanumeric clusters. These designate product type, bore size and stroke length, and options. Please refer elrin nd ap ylinder ore Size 02 9/16" 04 3/4" 09
More informationPIPELINE PIGS CLEANING BATCHING GAUGING
PIPELINE PIGS LENING THING GUGING 1.8.9.1 leaning pigs Model GW leaning Pig Sizes 2 to 8 Standard with steel wire wheel brushes. Specify discs for bidirectional operation. Model G leaning pig Sizes 6 to
More informationXRAY Series Includes
XRAY Series 2 Finger 1250N, 2200N, 2500N, 4400N XRAY Series Includes XRAY 1250 XRAY 1250 LBR XRAY S 2200 Tandem XRAY 1250 Tandem XRAY S 2200 XRAY Applications: An XRAY S is used to handle a transmission
More informationGlove Use Considerations
Glove Use Considerations One of the first lines of defense against laboratory hazards is protective gloves, so it pays to choose your gloves wisely and seek advice if necessary. In a lab setting our hands
More informationH O. 2 Fitness. Pro Rower H 0 2 RX- 750 RX- 850 RX- 950
H O 2 Fitness Pro Rower H 0 2 RX- 750 RX- 850 RX- 950 RX-750 Home Series Bringing Commercial Grade Quality to Your Home at an Affordable Price 170 Using the same dynamics as actual rowing, the user adjusts
More informationA Higher Level of Performance. Data Sheet. Centurion. Guided Radar. CGR Series. For more information, please visit >
A Higher Level of Performance Data Sheet Centurion Guided Radar CGR Series For more information, please visit > www.hawkmeasure.com / Dimensions Centurion Guided Wave Radar Radar Principle of Operation
More informationBy: Stephanie Bendtsen, Joseph Calderan, and Celeste Dupont Team 17 Client: Dr. Sun
By: Stephanie Bendtsen, Joseph Calderan, and Celeste Dupont Team 17 Client: Dr. Sun Flow Loop Design Introduction Purpose: to build a pulsatile flow loop that allows for implementation and testing of mechanical
More informationRumba MELBOURNE SYDNEY CANBERRA BRISBANE PERTH ADELAIDE AUCKLAND WELLINGTON SHANGHAI HONG KONG
Rumba Rumba Rumba employs a clean, simple design language, creating a strong, bold style, further underlined by its firmly grounded stance. Rumba workstation Features Rumba exhibits exceptional stability,
More informationCSPA AEROSOL GUIDE NINTH EDITION TABLE OF CONTENTS. SECTION B INTRODUCTION: CSPA Aerosol Products Division Committees
SECTION A : AEROSOL GUIDE -- 9 th EDITION CD INTRODUCTION A1 A2 SECTION B INTRODUCTION: CSPA Aerosol Products Division Committees Rosters for Aerosol Products Division Committees -- September 2009 B1 B6
More informationVTRY Series Track Roller Assembly V-Grooved Yoke Type Ball & Tapered Roller Bearings
VTRY Series Track Assembly V-d Ball & Tapered Bearings Track A B C G P SD SL T Bore +.0007 -.0000 Center Point +.000 -.001 Length Inner Race +.005 -.010 VTRY-2.50-9 2.50 0.880 0.4380 0.47 1.750 0.9 0.03
More informationneedle valves 3700, 3800, 3900 Series Forged Body, Integral Bonnet Needle Valves
orged ody, Integral onnet Needle Valves Offered in four different body materials, this group of valves can handle a wide range of general purpose liquid and gas applications. Six types of stem tips are
More informationIn-Line Accessories. In-Line Pressure Gauges. Pressure Gauges. In-Line Accessories
Pressure Gauges Pressure gauges for monitoring system pressure Hoses and test points for sampling oil and determining ISO cleanliness levels Flanges to connect components Valves for system control In-Line
More informationHMS4 and HMSA7 seals. Radial shaft seals
Radial shaft seals HMS4 and HMSA7 seals HMS4 and HMSA7 seals are primarily availale in inch sizes ut are also availale in a very limited numer of metric sizes that are in the process of eing replaced y
More informationProduct Index by Coupler Style & Interchange
Product Index by Coupler Style & Interchange Flat Face Style Series Description Page # A Premier ISO 16028 Interchange Flat Face Coupling In accordance with ISO 16028 for Interchange and Performance. s:
More informationRUBBER WATERBLAST HOSES
up to 15, PSI (1 Bar) RUBBER WATERBLAST HOSES These high pressure hose assemblies combine rugged construction, dependability and safe performance. Designed specifically for waterblast applications Lightweight
More informationA Higher Level of Performance. Data Sheet. Centurion. Guided Radar. CGR Series. For more information, please visit >
A Higher Level of Performance Data Sheet Centurion Guided Radar CGR Series For more information, please visit > www.hawkmeasure.com / Dimensions Centurion Guided Wave Radar Radar Principle of Operation
More informationIn-Line Check Valves. Features. Valves. Working Pressures to: Flow Ranges to:
Valves In-Line Check Valves Working Pressures to: Flow Ranges to: 5700 psi/393 bar 200 gpm 757 lpm Features Steel constructed check valves are compatible with all non-corrosive liquids. Valves contain
More informationINTEGRAL-BONNET NEEDLE VALVES H-300 SERIES
INTEGRAL-BONNET NEEDLE VALVES SERIES INTEGRAL-BONNET NEEDLE VALVES SERIES FEATURES n Straight and angle pattern n Stainless Steel and Brass construction n MAWP 5000 psi (345 bar) n MAWT 446 F (230 C) n
More informationDepending on individual compound, between -34 ๐ C and -57 ๐ C
Acrylonitrile-Butadiene (NBR) Nitrile rubber (NBR) is the general term for acrylonitrile butadiene copolymer. The acrylonitrile content of nitrile sealing compounds varies considerably (18% to 50%) and
More informationJB90A. FS65 Balanced-Pressure Series
J90 S W I V E L J O I N T S S65 alanced-pressure Series eatures and enefits New eroquip S65 alanced-pressure Series swivel joints answer customer requests for a more cost competitive, compact product.
More informationPROVIDING SAFETY SOLUTIONS SINCE 1996 OUR MISSION. OUR FOUNDATIONS Quality Service Innovation Compliance. Distributed by: C E R T I F I E D
PROVIDING SAFETY SOLUTIONS SINCE 1996 RONCO is a world-class manufacturer specializing in workplace safety solutions for: HEAD HAND PROTECTION BODY OUR MISSION To provide our customers with consistent
More informationTEKNOCRAFT INC. Proportional Valves. Mini Valves. Outlet Balanced Valves. Standard Valves. Your Proportional Valve Specialists
TEKNOCRAFT INC. Your Proportional Valve Specialists Proportional Valves Mini Valves Outlet Balanced Valves Standard Valves Table of Contents Teknocraft Unique Designs... 3 Mini Valves... 6 Outlet Balanced
More informationThermoplastic Obturation Systems. Our innovation Your success
Our innovation Your success Introduction CMS Dental produces the largest range of endodontic obturators for the final filling of the root canal. More than 20 million root canals have already been filled
More informationInterchange Coupling. Poppet: Interchange Coupling
griculture Overview Stucchi griculture Series couplings are offered with a choice of either ball or poppet valve mechanisms for automatic shut-off during disconnection. The ball mechanism is the IR series,
More informationSavillex Technical Note C-Flow 700d PFA Concentric Nebulizer for ICP-OES
Savillex Technical Note C-Flow 700d PFA Concentric Nebulizer for ICP-OES Summary The Savillex C-Flow 700d (C700d) is a concentric PFA nebulizer designed specifically for ICP-OES, combining extreme matrix
More informationSalto Talaris Total Ankle Prosthesis
Instructions for Use Salto Talaris Total Ankle Prosthesis Federal (USA) law restricts this device to sale by or on the order of a physician. Important The manufacturer recommends that all personnel responsible
More informationSKF bearings with Solid Oil Relubrication-free solutions for harsh environments and tough locations
SKF bearings with Solid Oil Relubrication-free solutions for harsh environments and tough locations 2-4x MORE OIL THAN A GREASE-LUBRICATED BEARING Beneits of Solid Oil Solid oil, which was developed for
More informationQuick Sealing with a Twist to Connect Actuation Method
- Finger tighten seals up to 689 bar (10,000 psi) for pneumatic and hydraulic testing - Safe and Reliable leak tight connections to male and female threads - Eliminate thread damage, sealant and wrenches
More informationMerkel Guide Ring Guivex SBK
Merkel Guide Ring Guivex SBK Merkel Guide Ring Guivex SBK Material range 300 Material Code Colour Fabric-base laminate GW G517 Dark grey Fabric-base laminate GW G650 Red Fig. 1 Merkel Guide Ring Guivex
More informationUnion Bonnet Valves - VU6 Series
BlowOur Proof Back Seating Hardened Stem Thread Mountable Panel nut Metal Seal Bonnet Union Bonnet Valves VU6 Series Features Pressure rating up to 6000psig (13bar) @38 C (100 F) Temperature rating from
More informationAccessories for LV AirGuard Cables Glands, Connectors and Installation Tools.
Accessories for LV AirGuard Cables Glands, Connectors and Installation Tools. A Non-Potted Gland TECHNICAL DATA Design Specification BS 6121:Part 1:1989, IEC 62444, EN 62444 Mechanical Classifications*
More informationCalibration Standards
Calibration Standards/ Calibration Standards TSKgel standards polystyrene TSKgel standards poly(ethylene oxide) PStQuick polystyrene calibration standards TSKgel guard column products Fittings Pre-injector
More informationInstrumentation Tube, Seamless & Welded Pipe Catalogue
Hydraulic & Offshore Supplies Instrumentation Tube, Seamless & Welded Pipe Catalogue YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE Seamless
More informationHands-on Posterior Tooth Preparation. Practical Skills Courses, SWL, 25/11/2016
Hands-on Posterior Tooth Preparation Practical Skills Courses, SWL, 25/11/2016 Hands-On Didactic Teaching A Tooth-Friendly-Approach - Hands-on Tooth Preparation Course - Dental Simulation to include: Posterior
More informationOrthopedic Nursing, Part 2. External Fixation. Nursing Best Practice Guidelines
Orthopedic Nursing, Part 2 External Fixation Nursing Best Practice Guidelines Reasons for External Fixation Device Placement.. a technique of fracture immobilization a series of transfixing pins are inserted
More informationEasy assembly with standard tools. Fully insulated for direct mounting to steel panels
Cam-Lok J Series Connectors or NEMA 4 Cam-Lok J Series Connectors are specifically designed to meet the needs of demanding portable applications. J Series Plugs and Receptacles are the proven industry
More informationFittings & Accessories
Fittings & Accessories Adalet offers a range of fittings and accessories for use in general purpose or industrial locations. These fittings and accessories are used in conjunction with our industrial electrical
More informationSERVICE VALVES. Selecting the Correct Service Valves COMPRESSOR PARTS
COMPRESSOR SERVICE VALVES Table of Contents Selecting the Correct Service Valves 1. Determine Type of Fitting on Compressor Head: HEAD TYPES O Ring 3/4 x 7/8 Tube-O 1-14 Rotalock, or Flange 2. Determine
More informationOptimal. Equipment for the glass professional. T-MAX EVO
Optimal. Equipment for the glass professional. T-MAX EVO Optimal. Equipment for the glass professional. All essential tools at hand! This toolbox with sturdy wheels and a stowable handle is the mobile
More informationSimplicity without compromise The design philosophy of the ASTRA TECH Implant System EV is based on the natural dentition utilizing a site-speciic, cr
Product catalog ASTRA TECH Implant System EV 32671039-USX-1602 Product catalog ASTRA TECH Implant System EV.indd 1 2016-04-19 08:31 Simplicity without compromise The design philosophy of the ASTRA TECH
More informationCOST, PROCESS & QUALITY IMPROVEMENT
COST, PROCESS & QUALITY IMPROVEMENT - Finger tighten seals up to 10,000 psi (689 bar) for pneumatic and hydraulic testing - Safe and Reliable leak tight connections to male and female threads - Eliminate
More informationNASA Space-Qualified Thermistors
NASA Space-Qualified Thermistors YSI 44900 Series Goddard Space Flight Center GSFC S-3-P-8 NASA has qualified YSI epoxy-encapsulated thermistors for use in extended space flight. The Goddard Space Flight
More informationFilter Drier CONTACT WEB. ADDRESS Fremont, CA, TELEPHONE +1 (800) (510)
SUIKA CLIMATE Product Catalog Filter Drier CONTACT WEB Info@suikaclimate.com ADDRESS Fremont, CA, 94555 TELEPHONE +1 (800) 625 0589 +1 (510) 859 8003 SUIKA CLIMATE TOEFLEX ABOUT US Suika Climate (US),
More informationC6L/C120L Lockbolt Grade 5.8/8.8
T: +44 (0) 1562 513910 F: +44 (0) 1562 69666 E: sales@rivco.co.uk W: www.rivco.co.uk Vibration Resistant Provides total resistance to vibratory loosening giving greataer reliability in service. 6L/120L
More informationSavillex Technical Note
Savillex Technical Note C700d PFA Concentric Nebulizer for ICP-OES Summary The Savillex C-Flow 700d (C700d) is a concentric PFA nebulizer designed specifically for ICP-OES, combining extreme matrix tolerance
More informationNaval Support Activity Monterey / Naval Postgraduate School
Background: Bloodborne pathogens are viruses present in human blood and body fluids that can cause disease in humans. Diseases like the hepatitis B virus (HBV), human immunodeficiency virus (HIV) and others
More informationHamilton Syringes. LT N LTN RN TLL TLL with slots. Hamilton Syringe Types Microliter. Hamilton Point Styles
Hamilton LT N LTN RN TLL TLL with slots Hamilton Point Styles Pt. 2 Pt. 3 Pt. 5 Pt. HP Hamilton syringes are designed as precision measuring instruments, and find wide use for sample introduction into
More informationLiquid ring vacuum pumps single-stage
Liquid ring vacuum pumps single-stage LOH 20103, LOH 20107 Pressure range: Suction volume flow: 150 to 1013 mbar 7 to 58 m³/h CONSTRUCTION TYPE Sterling SIHI liquid ring vacuum pumps are displacement pumps
More informationMULTIPOLAR BIPOLAR CUP. Surgical Technique
MULTIPOLAR BIPOLAR CUP Surgical Technique MULTIPOLAR BIPOLAR CUP ASSEMBLY 1PREASSEMBLY (BACK TABLE) TECHNIQUE INSERT FEMORAL HEAD Seat the femoral head securely in the polyethylene liner. The inner split
More informationPreparation and Installation of the SANITRX / SANITRX LP (IS) Rupture Disc for Use With Industry Standard Ferrules
Preparation and Installation of the SANITRX / SANITRX LP (IS) Rupture Disc for Use With Industry Standard Ferrules GEP-6063 Rev. T 102335 Ref. I.D.: 12978 WARNING USER SHOULD READ AND THOROUGHLY UNDERSTAND
More informationSTANDARD SAMPLE INTRODUCTION
STANDARD SAMPLE INTRODUCTION PFA and Polypropylene High-Efficiency MicroFlow Nebulizers MicroFlow nebulizers are resistant to clogging, are reliably self-aspirated or pumped and produce a fi ne aerosol
More informationWear sleeves. General
Wear sleeves General..................................................................... 332 SKF SPEEDI-SLEEVE.......................................................... 333 Features...................................................................
More informationOrdering Information You may contact us via phone, fax, , or through our website.
Elemental Scientific (ESI) designs and produces a range of sample introduction systems for the determination of trace element concentrations and isotope ratios in liquid samples when using inductively
More informationSelection. 1 Service factor Determine the required service factor from tables 9 and 10 on pages 87 and 88.
SKF Couplings SKF FRC Couplings With a higher load capacity than jaw couplings and maintenance-free operation, FRC couplings are designed as a general purpose coupling. They are able to cushion moderate
More informationSteri-Oss Compatible Components
Original Non-Hex & Direct To The Implant Impression opings nalogs IMPRESSION OPING To Fit Implant The impression coping for the Steri-Oss Original Non-Hex implant is used to take an impression of the implant
More informationFor Fast and Stable Fixation of the Sternum. Sternal ZIPFIX. System. Surgical Technique
For Fast and Stable Fixation of the Sternum Sternal ZIPFIX System Surgical Technique TABLE OF CONTENTS INTRODUCTION Sternal ZIPFIX System 2 AO Principles 7 Indications and Contraindications 8 SURGICAL
More informationDescription The 4000 Series offers up to 8600 in-lb of torque and 25 gpm (continuous ratings). This is the corner stone of the Char-Lynn line.
Highlights Features ety of mounting flanges and output shafts options Benefits motor into a system tough applications Applications Description The 0 Series offers up to 0 in-lb of torque and gpm (continuous
More informationSoft-ECC. SFT-2000 Endocervical Curettage Device. Physician and Clinician Primer Ver: July 2012
Soft-ECC SFT-2000 Endocervical Curettage Device Physician and Clinician Primer Ver: July 2012 LLC Histologics LLC 20409 Yorba Linda Blvd. Suite 119 Yorba Linda, CA 92886 Phone Toll Free and FAX: (888)
More informationHEAD & FACE PROTECTION. Technical Data Information Safety Helmet & Spare Parts Browguard and Faceshield Welding Helmet
HEAD & FACE PROTECTION Technical Data Information Safety Helmet & Spare Parts Browguard and Faceshield Welding Helmet Technical Data Information Safety Helmet This is the single most effective way of reducing
More informationLift Accessories. For Hunter Wheel Alignment Lift Racks. Includes Inflation Stati and Fully Inte Alignment Features
Lift Accessories For Hunter Wheel Alignment Lift Racks Includes Inflation Stati on and Fully Inte grated Alignment Features PowerSlide System RX-Series & L441 / L444 Lifts The PowerSlide locking mechanism
More informationDirect Reading (Pocket) Dosimeter
Direct Reading (Pocket) Dosimeter What is a Pocket Dosimeter???? Direct Read Pocket Dosimeters are rugged, precision instruments about the size of a pocket fountain pen, which are used to measure accumulative
More information3229 PRO SERIES INCLINE LEVER ROW
3229 PRO SERIES INCLINE LEVER ROW 57 x 36 x 50 302 lbs Reduces low-back strain during lat work. Handle offers wide and neutral grips. 3229 has adjustable, wheeled footplates for quick adjustments. Main
More informationHeight* FC width Prep depth RC width 4.0mm+ 4.3mm N/A 6.3mm
STERN ERA IMPLANT ABUTMENT Summary Resilient precision overdenture attachment. Universal hinge with vertical movement. Titanium abutment, nylon male. Manufactured for most popular screw and cylinder implants.
More informationRestoration & Prosthetics. Quieter, asts longer NEW
Restoration & Prosthetics Quieter, asts longer NEW The instrument line for the highest demands. Customised straight and contra-angle handpieces with maximum precision, elegance and performance. The efficient
More informationIMPRESSION MATERIALS
IMPRESSION MATERIALS Function of Impression Materials To make a negative copy of an oral structure single tooth, quadrant, or arch edentulous or dentulous Negative copy must be accurate to produce an accurate
More informationYou should ALWAYS store persulfates: The Right Chemistry When Handled Right In a cool, dry area with temperatures below 77ºF (25ºC) for best stability. In a well-ventilated space. Away from incompatible
More informationOWNER S MANUAL and INSTALLATION INSTRUCTIONS
NP-B7520 GLUTE / HAM OWNER S MANUAL and INSTALLATION INSTRUCTIONS Glute / Ham Owner s Manual Copyright 2016. Core Health and Fitness, LLC. All rights reserved, including those to reproduce this book or
More informationSERVING THE DEWATERING MARKETS
ELECTRIC ELECTRIC SERVING THE DEWATERING MARKETS ABOUT MODY, INC..... The Initial Start in India. The roots of Mody Pumps, Inc. began in India in 1957, almost 5 years ago by D.N. Mody; a successful businessman
More informationGuidelines for surface adhesion with. marine DB50 SWISS MADE
0575 Flächenverklebung mit Guidelines for surface adhesion with Merbenit DB50 DB50 Before starting the adhesion process, all assembly parts have to be prepared accordingly. The surface treatment of the
More informationROTARY UNION 5000 SERIES STAINLESS STEEL - GENERAL PURPOSE MODELS ADDED. Operating Parameters FEATURES & BENEFITS CONFIGURATION OPTIONS
ROTARY UNION 5 SERIES STAINESS STEE - GENERA PURPOSE Operating Parameters SPEED,, 3,6 (MT) PRESSURE 75 psi (Water), psi (Steam), psi (Hot Oil), 3 psi (Air) TEMPERATURE 3 F (Water), 35 F (Steam), 395 F
More informationElemental Scientific Semiconductor Catalog for Thermo ELEMENT2
Elemental Scientific Semiconductor Catalog for Thermo ELEMENT2 Ordering Information You may contact us via phone, fax, e-mail, or through our website. EPOND S.A. CP 389 CH-1800 Vevey Switzerland Phone:
More informationDouble Block and Bleed ball valve have evolved to replace the process of bolting together individual valves to provide dual isolation.
Bleed valve Double Block and Bleed ball valve have evolved to replace the process of bolting together individual valves to provide dual isolation. This new assembly provides great savings in weight, space
More informationFree and Total Sulfur Dioxide (SO 2. ) in wine (Ripper method) by automatic titration
APPLICATION NOTE Free and Total Sulfur Dioxide (SO 2 ) in wine (Ripper method) by automatic titration No. T5 Water Analysis Instruments, Thermo Fisher Scientific Key words Sulfite, sulfurous acid, SO 2,
More informationAdjustable Dumbbells selection
We take the hassle out of ordering online and importing into Bermuda... We will get it for you!!!!!! Adjustable Dumbbells selection Bowflex SelectTech 1090s DumbBells $1,110.00 delivered Each dumbbell
More informationSKF SPEEDI-SLEEVE. and large diameter wear sleeves
SKF SPEEDI-SLEEVE and large diameter wear sleeves Contents The SKF rand now stands for more than ever efore, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark
More information15 cm Reservoir Tubing. 210 cm Tubing
12 Aerosol Therapy nebulisers AEROSOL THERAPY MICRO MIST SMALL VOLUME NEBULISER The MICRO MIST small volume nebuliser is designed for performance and economy and can be used for hand-held or in-line treatments.
More informationGeräteblatt Pallazza III PGI
Technische Dokumentation Geräteblatt Pallazza III 535.08 PGI Geräteblatt Pallazza III 535.08 PGI Geräteblatt Pelletofen Fiche technique Poêle à pellets Scheda tecnica Stufe pellet Equipment sheet Pellet
More informationProduct catalog. ASTRA TECH Implant System EV
Product catalog ASTRA TECH Implant System EV 2 CONTENTS Overview Product overview 3.0 4 Product overview 3.6 6 Product overview 4.2 8 Product overview 4.8 10 Product overview 5.4 12 OVERVIEW Surgery Implants
More information