Quick start Prosthetics

Transcription

1 EN Quick start Prosthetics Easy and effective

2 YELLOW PROSTHETIC PLATFORM QN CEMENTED RESTORATIONS ESTHETIC AUTMENTS OPEN TRAY POST IMPLANT ANALOG Indexed components with internal conical connection. 0.7 mm mm mm / mm mm mm Non-indexed components with internal conical connection. Abutments marked with this symbol are not suitable for single tooth restoration. SCREW-RETAINED RESTORATIONS IMPLANTS SCREW-ON AUTMENTS HEALING CAP COPINGS URN-OUT COPING AUTMENT ANALOG S mm mm mm mm mm mm mm mm ATTACHMENT-RETAINED RESTORATIONS 2.0 mm mm mm LOCATOR ATTACHMENTS LOCATOR PROCESSING LOCATOR REPLACEMENT INSERTS COPING AUTMENT ANALOG PACKAGE 0.5 mm mm mm mm mm mm mm INDIVIDUAL PROSTHETIC SOLUTIONS blue red pink orange clear green mm mm mm LASAK CADCAM RIDGES AND AUTMENTS CAST-ON AUTMENT OPEN TRAY POST IMPLANT ANALOG Tightening torque of gingiva former and impression components is 5 10 Ncm light finger force. Tightening torque of Screw-On bridge screw is 15 Ncm. Tightening torque of abutment screw, straight Screw-On abutments and LOCATOR attachments is 25 Ncm. If the torque of 50 Ncm is exceeded, by tightening the QN abutment screw, fracture will occure under the head of the screw. For tightening straight Screw-On abutments, use one of the insertion wrenches. Please, note that the insertion wrench mechanical, short is not suitable for tightening Screw-On abutments. The body of the Screw-On open tray (Ref. No ) is manufactured from titanium and, together with the Screw-On bridge screw (Ref. No ), can be used to create a Screw-On temp base for anchoring a temporary restoration.

3 LUE PROSTHETIC PLATFORM QR Indexed components with internal conical connection. Non-indexed components with internal conical connection. Abutments marked with this symbol are not suitable for single tooth restoration. ridge components with external platform. Abutments marked with this symbol are not suitable for single tooth restoration or linear anchored bridge. CEMENTED RESTORATIONS / mm mm mm ESTHETIC AUTMENTS CERAMIC AUTMENTS TEMPORARY AUTMENTS d5.0 d5.0 d mm mm mm / mm mm mm / mm mm mm mm mm mm / mm mm mm STANDARD AUTMENTS 1.0 mm mm mm mm mm mm d5.0/ mm mm mm mm d mm mm POSTS IMPLANT ANALOG IMPLANTS S mm mm mm mm mm T mm mm mm mm mm S mm mm mm mm mm mm d mm mm mm mm mm mm SCREW-RETAINED RESTORATIONS SCREW-ON AUTMENTS /20 / mm mm mm mm ATTACHMENT-RETAINED RESTORATIONS LOCATOR ATTACHMENTS LOCATOR PROCESSING LOCATOR REPLACEMENT INSERTS COPING AUTMENT ANALOG PACKAGE 0.5 mm mm mm mm mm mm mm mm mm mm mm mm HEALING CAP blue red pink orange COPINGS URN-OUT COPING AUTMENT ANALOG clear green T mm mm mm mm S mm mm mm mm mm ridge d mm mm mm INDIVIDUAL PROSTHETIC SOLUTIONS LASAK CADCAM RIDGES AND AUTMENTS CAST-ON AUTMENT TEMPORARY AUTMENTS POSTS IMPLANT ANALOG d4.0 d mm mm mm mm Tightening torque of gingiva former and impression components is 5 10 Ncm light finger force. Tightening torque of Screw-On bridge screw is 15 Ncm. Tightening torque of abutment screw, ceramic abutment screw, straight Screw-On abutments and LOCATOR attachments is 25 Ncm. For tightening straight Screw-On abutments, use one of the insertion wrenches. Please, note that the insertion wrench mechanical, short is not suitable for tightening Screw-On abutments. The body of the Screw-On open tray (Ref. No ) is manufactured from titanium and, together with the Screw-On bridge screw (Ref. No ), can be used to create a Screw-On temp base for anchoring a temporary restoration.

4 QN impression components overview QR impression components overview AUTMENTS OPEN TRAY CLOSED TRAY AUTMENTS OPEN TRAY CLOSED TRAY Esthetic narrow /15 Esthetic narrow /15 /25 d4.2 Closed tray Attachments LOCATOR LOCATOR Attachments LOCATOR Screw-On /20 /30 Screw-On open tray Screw-On closed tray LOCATOR STANDARD staight, wide d5.0 STANDARD Screw-On straight Screw-On open tray Screw-On closed tray Esthetic wide /15 /25 Ceramic wide Cast-On Cast-On d5.0 d5.0/15 LASAK CadCam custom abutment Closed tray LASAK CadCam custom abutment Temporary d4.0 LASAK CadCam bridges LASAK CadCam bridges ridge d4.9 impression post bridge Temporary bridge d4.0

5 Recommendations Multi-unit superstructures Multi-unit screw-retained superstructures can be made either by using Screw-On abutments or as milled implant-supported LASAK CadCam superstructures. For LASAK CadCam superstructures, use the bridge components marked (bridge). Using bridge gingiva formers, s and temporary abutments allows for optimum soft tissue management and the precise fit of the restoration to the implant surface. The same is true for restorations made with the bridge Cast-On abutments. ridge abutments are not suitable for linear anchored bridges. Turning the indexed component When inserting the implant, ensure to orientate the flat part of the internal hexagon in the vestibular direction to obtain the maximum esthetic effect. efore tightening the pin, make sure the fits well in the internal hexagon of the implant. Tighten the pin with a screwdriver. If in doubt, use OPG to check the situation. The fastening pin can be shortened by 3.5 mm, if necessary. There is a ring marked on the pin where it can be broken with the help of a screwdriver. The body of the can be shortened with a se paration disc. Warning! The body of and the pin can only be shortened extraorally. 3.5 mm LASAK Ltd. Českobrodská 1047/ Prague 9 Hloubětín Czech Republic tel.: fax: info@lasak.com