PRODUCT CATALOG CERALOG IMPLANT SYSTEM

Transcription

1 PRODUCT CTLOG CERLOG IMPLNT SYSTEM Valid from 2018

2

3 SYSTEM INFORMTION The CERLOG Implant System 2 SURGERY Planning 9 Implants 13 CERLOG Surgery Set 15 Surgical instruments 16 Healing caps 21 PROSTHETICS Impression taking 23 Temporary abutments 24 butments PEKK 24 CD/CM prosthetics 25 ccessories for abutments and healing caps 26 Prosthetic instruments 26 Selection abutments 27 INDEX lphabetical 28 rticle numbers 29 CERLOG Product Catalog

4 CERLOG IMPLNT SYSTEM REVERSIBLE With the CERLOG Hexalobe implant, retrievable prosthetics solutions are possible cemented or screw-retained crowns. INNOVTIVE BUTMENT The innovative PEKK high performance polymer abutment is ductile and offers an excellent biological seal. In addition, it has damping properties and reduces the stress concentration on the implant. DUL SURFCE The dual surface texture of CERLOG is unique for achieving optimum soft tissue adaptation and the right level of roughness for optimized osseointegration. This is possible because of the hightech manufacturing process of Ceramic Injection Molding (CIM). The demand for highly esthetic natural prosthetics increases everyday. The trend favors ceramic implant solutions with the highest level of biocompatibility. The high soft tissue compatibility of zirconia is generally recognized. The CERLOG Implant System is a mature system and has been in clinical use for years. The implants offer a high level of predictability and provide exceptional esthetic properties. In 2006, the Swiss company XIS biodental S already began the research for the development of high performance zirconia implants in conjunction with Ceramic Injection Molding (CIM). The first clinical studies were conducted in 2007 and already used the current material composition and surface texture. Commercialisation began with the single piece Monobloc implant. The two-piece Hexalobe implant has been used successfully in the present configuration since early Ceramic implants will establish themselves on the implant market, not only for medical reasons, but above all for highly esthetic aspects. Osseointegration is predictable due to high-tech manufacturing processes and innovative surface textures. 2 CERLOG Product Catalog 2018

5 ESTHETICS The ivory color, which is close to the natural tooth color, and the properties of zirconia support high esthetic results. IDEL CONNECTION Hexalobe the ideal implant-abutment connection for ceramic implants. The torque is transmitted tangentially to the implant which allows a much higher torque compared to hexagonal connections, and also more rotational stability. CERLOG Product Catalog

6 CERLOG HEXLOBE ND CERLOG MONOBLOC From the implant to the crown: perfect natural esthetics, like a natural tooth. Options for treatment planning include the transgingival healing of the CERLOG Monobloc implant and flexible trans- or subgingival healing two-piece CERLOG Hexalobe implant. The CERLOG implant system is simple to use, thanks to the screw-retained abutment and the clearly structured surgical procedure. The ivory color, which is very close to a natural tooth, and the properties of zirconia support high esthetic results. HEXLOBE The implants are available in three lengths (8, 10 and 12 mm) and in one diameter (4 mm). IMPLNT DIMETER 4.0 mm IMPLNT LENGTHS 8 mm 10 mm 12 mm MONOBLOC THE MTERIL Y-TZP HIP ZIRCONI CERLOG implants consist of ultra-pure yttrium stabilized tetragonal zirconia. They are manufactured by Ceramic Injection Molding (CIM), whereby both the outer geometry as well as the surface texture are already created in a mold before the sintering and HIP process. No abrasive treatment of the zirconia is necessary during this process. Only few companies worldwide are capable of managing this high-tech manufacturing process. 100% quality control: every single implant is tested optically, dimensionally and with appropriate mechanical loading in a controlled method. Internal structure of zirconia implant (picture: MEB, magnifying 6000x) DIFFERENT MECHNICL PROPERTIES OF ZIRCONI ND TITNIUM Young s Modulus (GPa) Shear Strength (MPa) Titanium grade 4 Zirconia (Y-TZP HIP) Tensile Strength (MPa) Compressive Strength (MPa) CERLOG Product Catalog 2018

7 THE DUL SURFCE TEXTURE The unique dual surface texture of CERLOG combines two defined roughnesses on a single implant, without the need for post-processing. The endosseal area of the implant body has a micro-roughness with a Ra value of 1.6 μm to enable targeted deposition of bone cells. The neck area of the implant has a lower degree of roughness with a Ra value of 0.5 μm, which additionally optimizes the deposition of soft tissue. Ra 1.6 µm Ra 0.5 µm Crown butment butment screw Upper thread THE HEXLOBE IMPLNT-BUTMENT-CONNECTION Esthetics, quality of life and patient satisfaction are largely based on prosthetic elements. The perfect implant-abutment connection is of significant relevance for the long-term, stable success of the restoration. The CERLOG Hexalobe connection has been designed and perfected specifically for ceramic implants. Forces are transferred tangentially, enabling a higher transfer of force and high rotational stability. Inner thread Implant DVNTGES ND BENEFITS IMPLNT-BUTMENT-CONNECTION High level of user safety thanks to the connection design High positioning precision due to minimal rotational freedom No transfer key for abutments required Ceramic-compatible force transfer when inserting the CERLOG Hexalobe implant CERLOG Product Catalog

8 Type Cam alignment against angulation Type B Cam alignment in the direction of angulation CERLOG BUTMENT The CERLOG Implant System offers straight and angled abutments made of the high performance polyether ketone ketone (PEKK). The abutments are attached to the implant either via a titanium or gold screw. PEKK has a light color and is easy to process with conventional milling equipment. 30 Type Type B Cams with 30 offset THE PEKK HIGH PERFORMNCE POLYMER PEKK belongs to the polyaryl ether ketone (PEK) family. These are high performance thermoplastics, which are required and used for extreme conditions, for example, in automotive engineering, the aerospace industry as well as medical engineering. Due to their chemical structure they offer excellent tensile strength, rigidity and hydrolysis resistance. In addition to its long-standing use in orthopedics, PEKK also covers a broad spectrum of indications in dentistry. For example, in restorations where stress shielding has to be reduced. The ductility of PEKK reduces the stress on the implant. BIOCOMPTIBILITY ND STERILIZTION OF PEKK The biocompatibility of PEKK implant material has been established by Oxford Performance s Inc. for long-term use according to the ISO standard. In an earlier study, it was demonstrated that PEKK particles are relatively free of irritation when compared to well known polymer implant materials such as PMM or polyethylene. PEKK can also be steam sterilized. PEKK PEEK Young s modulus (GPa) Tensile strength (MPa) Flexural strength (MPa) Compressive strength (MPa) Elongation at break (%) > Melting temperature ( C) Water absorption after 24 hrs. (%) < Density (g/cm 3 ) PEEK VS. PEKK The more familiar high performance polymer polyether ether ketone (PEEK) has been used in dental medicine dentistry for many years for temporary restorations, for scanning posts and for standard impression posts. This also belongs to the PEK group of polymers (poly aryl ether ketone). The synthesis of PEKK was started in 1962 by the DuPont chemicals group, which since then has refined polymerization over the following decades. The later PEKK synthesis was adapted by Oxford Performance s and rkema, who initiated market introduction of the material into numerous industry segments. The major advantage of PEKK over PEEK is the higher creep resistance and its contour retention under stress loading. 6 CERLOG Product Catalog 2018

9 CERLOG COMPONENTS FOR SOFT TISSUE MNGEMENT The CERLOG Hexalobe implant set includes a cover cap which can be placed in the Hexalobe connection during the healing time. The implant can also be covered with a cover screw (available separately). With both options, the implant can heal either in a transgingival or submerged method. Healing caps in two heights and two diameters as well as a temporary abutment are available for soft tissue shaping. These components are made of PEEK and they are designed for limited use. CERLOG IMPLNT IMPRESSION TKING With the use of a transfer cap or impression post, impressions of CERLOG Hexalobe implants can be taken both closed as well as open. Impressions of the CERLOG Monobloc implants are taken via the pick-up method with a transfer cap. The impression components are made of the high performance polymer PEEK. CERLOG Product Catalog

10 CERLOG SURGERY The CERLOG Hexalobe and CERLOG Monobloc implants were developed for transgingival healing. The 1.5 mm high region of the implant neck is positioned supracrestally during insertion. The Hexalobe implant can also be placed epicrestally by using the bone profile drill and deepening of the implant bed. Healing can be both submerged as well as transgingival. The surgical set contains all the components necessary for the insertion of the implants. ø 4.8 Note Dimensions are given in millimeters (mm). ø ø 4.0 ø 4.0 CERLOG HEXLOBE IMPLNT with mounted PEKK abutment CERLOG MONOBLOC IMPLNT 8 CERLOG Product Catalog 2018

11 PLNNING X-RY PLNNING FOILS rtikel rt.-nr. X-RY PLNNING FOIL CERLOG Hexalobe Implant EPICRESTL protocol CERLOG Hexalobe and Monobloc Implant SUPRCRESTL protocol Ø 4.5 mm 14 mm Ø 4.5 mm 12 mm 10 mm 8 mm Ø 4.0 mm pical drill excess length 1.75 mm 14 mm 12 mm 10 mm 8 mm Ø 4.5 mm Ø 4.0 mm Ø 4.0 mm pical drill excess length 1.0 mm CTUL SIZE 1 : mm 25% MGNIFICTION 1.25 : 1 8 mm 10 mm 12 mm 14 mm 16 mm CERLOG X-Ray planning foil for CERLOG Hexalobe and Monobloc implants, for the epicrestal and supracrestal surgical protocol I mm 8 mm 10 mm 12 mm 14 mm 16 mm 40% MGNIFICTION 1.4 : 1 8 mm 10 mm mm 12 mm 14 mm 16 mm HEDQURTERS CMLOG Biotechnologies G Margarethenstr Basel Switzerland MNUFCTURER xis biodental S Les Rosées Les Bois Switzerland I1259 Rev. 0 09/2017 CERLOG Product Catalog

12 EXPLNTION OF SYMBOLS EXPLNTION OF BBREVITIONS CE-label Diameter Sterilized using irradiation Enossal diameter Non-sterile Gingival diameter Caution, observe the warning notices Prosthetic platform diameter Use-by date Length Do not re-use Gingival height rticle number Poly ether ether ketone Lot number Poly ether ketone ketone Manufacturer Protect against sun light Maximum speed (clockwise or anti-clockwise) Maximum torque (only clockwise) Consult instructions for use Do not use if package is damaged Do not resterilize Sterilizable up to 134 C GENERL SFETY INSTRUCTIONS ND WRNINGS The descriptions in this product catalog are not sufficient to allow immediate use of the CERLOG Implant System. Instruction by a surgeon experienced in using the CERLOG Implant System is strongly recommended. 10 CERLOG Product Catalog 2018

13 SECONDRY PCKGING Sealed, folding box with product label INNER IMPLNT PCKGING (PRIMRY PCKGING) Sealed EXMPLE OF PRODUCT LBEL FOR EXTERIOR IMPLNT PCKGING Length Implant name Diameter HIBC datamatrix Use-by date CE-label rticle number Lot number CERLOG Product Catalog

14 12 CERLOG Product Catalog 2018

15 CERLOG HEXLOBE IMPLNTS rticle Type rt. No. L1 E M mm L L E CERLOG Hexalobe implant incl. cover cap, sterile Zirconia (Y-TZP HIP) M mm 10 mm M mm 4.0 mm CHIRURGIE CERLOG MONOBLOC IMPLNTS rticle Type rt. No. L1 E M mm L L CERLOG Monobloc implant sterile Zirconia (Y-TZP HIP) M mm 10 mm 4.0 mm E M mm CERLOG Product Catalog

16 CERLOG SURGERY SET C1031 C1030 C1156 B1108 Screwdriver Torque wrench C1031 Wrench adapter C1030 Monobloc implant holder C1029 C1156 Extension C1029 Hexalobe implant holder B1021 Pro le drill Hexalobe implant holder B1021 Cover cap extractor Monobloc implant holder B1108 B1108 B1021 Round bur Ø 1.4 B1212 Pilot drill Ø 2.4 B1013 Gauge B1022 B1170 Drill S Ø 2.9 B1014 C1174 Drill M Ø 3.4 B1015 Depth gauge M B1024 Tap M B1082 B1170 C1174 B1212 B1013 B1022 B1014 B1015 B1024 B CERLOG Product Catalog 2018

17 CERLOG SURGERY SET rticle rt. No. CERLOG Surgery set contains all the necessary surgical instruments, incl. torque wrench B1085 CERLOG Surgery tray without content F1168 CERLOG Product Catalog

18 CERLOG SURGICL INSTRUMENTS rticle rt. No. L Round bur resterilizable B mm 34 mm Point drill resterilizable B mm 30 mm Pilot drill resterilizable B mm 34 mm B mm Form drill S, M resterilizable 34 mm B mm 16 CERLOG Product Catalog 2018

19 rticle rt. No. L Bone profile drill resterilizable B mm 26.5 mm Tap M resterilizable B mm 31 mm CERLOG Product Catalog

20 GENERL SURGICL INSTRUMENTS rticle rt. No. Dimension Handpiece extension resterilizable C mm 26 mm Tissue punch resterilizable B mm (int) 5.0 mm (ext) 23 mm Direction gauge resterilizable B mm 20 mm Depth gauge M resterilizable B mm 27 mm 18 CERLOG Product Catalog 2018

21 rticle rt. No. Dimension Hexalobe implant holder resterilizable B mm Monobloc implant holder resterilizable PEEK, B mm Cover cap extractor resterilizable C mm CERLOG Product Catalog

22 GENERL SURGICL INSTRUMENTS rticle rt. No. Dimension Torque wrench resterilizable C mm Wrench adapter resterilizable C mm R Screwdriver ISO shaft resterilizable C mm 20 CERLOG Product Catalog 2018

23 DDITIONL SURGICL RTICLES rticle rt. No. Dimension 0.5 mm Cover cap PEEK D mm 0.5 mm 0.8 mm Cover screw PEEK/titanium alloy D mm 0.8 mm HELING CPS rticle rt. No. GH D mm 2.5 mm GH Healing caps supplied without screw PEEK D mm 4.0 mm Note: ll additional surgical articles and healing caps are supplied non-sterile. CERLOG Product Catalog

24 22 CERLOG Product Catalog 2018

25 IMPRESSION TKING rticle rt. No mm Hexalobe open tray transfer incl. fixing screw PEEK, titanium alloy D mm 6 mm Hexalobe closed tray transfer cap for supracrestally placed implants PEEK D mm 12 mm Hexalobe implant analog PEEK D Monobloc closed tray transfer cap 6 mm PEEK D mm 17 mm Monobloc implant analog D CERLOG Product Catalog

26 TEMPORRY BUTMENT rticle rt. No. GH 7.5 mm Temporary abutment supplied without screw PEEK D mm - BUTMENTS PEKK rticle rt. No. GH 8 mm PEKK abutment, straight supplied without screw PEKK D mm - 8 mm PEKK abutment, 15 angled, type supplied without screw PEKK D mm - 8 mm PEKK abutment, 15 angled, type B supplied without screw PEKK D mm - Note: ll abutments are supplied non-sterile. 24 CERLOG Product Catalog 2018

27 CD/CM PROSTHETICS rticle rt. No. 8 mm CERLOG Scanbody incl. abutment screw PEEK, titanium alloy D mm Note: ll scanbodies are supplied non-sterile. Not available in all countries. CERLOG Product Catalog

28 CCESSORIES FOR BUTMENTS ND HELING CPS rticle rt. No. Gewinde 7.3 mm Titanium prosthetic screw for the definitive screwing of abutments into the implant titanium alloy D M mm Gold prosthetic screw for the definitive screwing of abutments into the implant Holisticor D M mm Laboratory screw for fixation on the working model, green anodized titanium alloy D M1.6 PROSTHETIC INSTRUMENTS rticle rt. No. L Laboratory screwdriver C mm Note: ll screws are supplied non-sterile. 26 CERLOG Product Catalog 2018

29 SELECTION BUTMENTS rticle rt. No. GH 8 mm Selection abutment, straight POM D mm - 8 mm Selection abutment, 15 angled, type POM D mm - 8 mm Selection abutment, 15 angled, type B POM D mm - CERLOG PROSTHETIC PLNNING SET rticle rt. No. CERLOG Prosthetic planning set incl. laboratory screw, lab screwdriver selection abutment straight,selection abutment 15 angled, type and type B D1161 CERLOG Product Catalog

30 INDEX LPHBETICL B Bone profile drill 17 C Cover cap 21 Cover cap extractor 19 Cover screw 21 D Depth gauge M 18 Direction gauge 18 F Form drill S, M 16 G Gold prosthetic screw 26 H Handpiece extension 18 Healing caps 21 Hexalobe closed tray transfer cap 23 Hexalobe open tray transfer 23 Hexalobe implant holder 19 Hexalobe implant 13 Hexalobe implant analog 23 L Laboratory screw 26 Laboratory screwdriver 26 M Monobloc closed tray, transfer cap 23 Monobloc implant holder 19 Monobloc implant 13 Monobloc implant analog 23 P PEKK abutment, 15 angled, type 24 PEKK abutment, 15 angled, type B 24 PEKK abutment, straight 24 Pilot drill 16 Point drill 16 Prosthetic planning set 27 R R screwdriver, ISO-Shaft 20 Round bur 16 S Scanbody 25 Selection abutment, 15 angled, type 27 Selection abutment, 15 angled, type B 27 Selection abutment, straight 27 Surgery set 15 Surgery tray 15 T Tap M 17 Temporary abutment 24 Tissue punch 18 Titanium prosthetic screw 26 Torque wrench 20 X X-Ray planning foil for CERLOG Hexalobe and Monobloc implants, for the epicrestal and supracrestal surgical protocol 9 W Wrench adapter CERLOG Product Catalog 2018

31 INDEX RTICLE NUMBER Monobloc implant 1074 M8, Ø 4.5 mm, L 8 mm M10, Ø 4.5 mm, L 10 mm M12, Ø 4.5 mm, L 12 mm 13 Hexalobe implant 1078 M8, Ø 4.5 mm, L 8 mm M10, Ø 4.5 mm, L 10 mm M12, Ø 4.5 mm, L 12 mm 13 B1010 Tissue punch 18 B1012 Point drill 16 B1013 Pilot drill 16 Form drill B1014 S, Ø 2.9 mm, L 34 mm 17 B1015 M, Ø 3.4 mm, L 34 mm 17 B1021 Hexalobe implant holder 19 B1022 Direction gauge 18 B1024 Depth gauge M 18 B1082 Tap M 17 B1085 Surgery set 15 B1108 Monobloc implant holder 19 B1170 Bone profile drill 16 B1212 Round bur 16 C1028 Laboratory screwdriver 27 C1029 Handpiece extension 18 C1030 Wrench adapter 20 C1031 Torque wrench 20 C1156 R Screwdriver ISO shaft 20 C1174 Cover cap extractor 19 D1036 Monobloc closed tray 23 transfer cap D1037 Monobloc implant analog 23 D1040 Hexalobe closed tray 23 transfer cap D1042 Hexalobe implant analog 23 D1048 Healing cap, GH 2.5 mm 21 D1131 Temporary abutment 24 D1132 Healing cap, GH 4.0 mm 21 D1149 Titanium prosthetic screw 26 D1152 Hexalobe open tray transfer 23 D1153 Cover screw 21 PEKK abutment D1154 straight 24 D angled, type 24 D angled, type B 24 Selection abutment D1158 straight 25 D angled, type 25 D angled, type B 25 D1161 Prosthetic planning set 25 D1162 Laboratory screw 26 D1165 Gold prosthetic screw 26 D1171 Cover cap 21 D1254 Scanbody 26 F1168 Surgery tray (without content) 15 I1259 X-Ray planning foil for CERLOG Hexalobe and Monobloc implants, for the epicrestal and supracrestal surgical protocol 9 FURTHER DOCUMENTTION FURTHER INFORMTION ON THE CERLOG PRODUCTS CN BE FOUND IN THE FOLLOWING DOCUMENTTION: CERLOG Instructions for use CERLOG Working instructions The documents are available from the local CMLOG representative. See also: TRDE NMES ND COPYRIGHT Protected trade names (trademarks) are not specially indicated. The absence of such indication does not mean that it is not a trademarked name. The publication including all its parts is protected by copyright. ny exploitation beyond the narrow limits of the copyright act is not permissible without the approval of CMLOG Biotechnologies G and is subject to legal sanctions. CERLOG Product Catalog

32 Customer number: rt. No. I1236 Rev.03 05/2018 HEDQURTERS CMLOG Biotechnologies GmbH Margarethenstr Basel Switzerland Phone Fax Manufacturer of CERLOG Products: XIS biodental S Les Rosées Les Bois Switzerland CERLOG is a registered brand in Germany