Pneumatic Tie Rod Cylinders

Transcription

1 Tie od ylinders_printerspreads.qxp:layout 1 8/9/16 4:19 PM Pneumatic Tie od ylinders Page 2

2 Table of ontents Pneumatic Tie od ylinder Overview Product Overview...pg. 2 Pneumatic Tie od Interchangeable ylinder (1 1/2 to 4 Bore) How to Order...pg. 3 orce harts...pg. 3 Basic No Mount...pg. 4 od End Styles...pg. 4 lange and Trunnion Mounts...pg. 5 levis, Eye and ngle Mounts...pg. 6 Side Lug, Bottom Tap and Pneumatic Tie od Mounts...pg. 7 ccessories...pg. 8 od Diameter Selection...pg. 9 Dual Piston Selection...pg. 10 pproximate ylinder Weight hart (lbs.)...pg. 10 lignment oupler...pg. 10 Pneumatic Tie od Pin-ct ylinder (1 1/2 to 4 Bore) How to Order...pg. 11 Basic Dimensions (X0 Mount)...pg. 12 od End Styles...pg. 12 one Point Styles...pg. 12 lange and ngle Mounts...pg. 13 Side Lug, Bottom Tap and Pneumatic Tie od Mounts...pg. 14 Pneumatic Tie od Interchangeable ylinder (5 to 10 Bore) How to Order...pg. 15 orce hart...pg. 15 Basic No Mount...pg. 16 od End Styles...pg. 16 lange Mount...pg. 17 levis and Bottom Mounts...pg. 18 Trunnion and Pneumatic Tie od Mount...pg. 19 ccessories...pg. 20 Sensors...pg. 21 utomotive Shot Pin...pg. 22 ir-transfer System Shaker...pg. 22 Special onditions and Limited Warranty...pg. 22 1

3 Pneumatic Tie od ylinder Overview Pneumatic Tie ods Stainless steel material prevents corrosion Piston od High strength, precision chrome plated steel Superior wear resistance Stainless steel rod available Tube High strength hard anodized aluminum Superior wear resistance (Optional) Enersorb Piston (Patented) Innovative design integrates seal, wear band, magnet and bumpers into one component High Energy bsorption Bumpers reduce noise more than 50% od Seal Bubble tight carboxilated nitrile seal Head, ap & etainer High strength anodized aluminum ushions Unique floating cushion seal Needle adjustment changes amount of cushion Seal design provides full flow out of cushion od Wiper Durable urethane prevents contamination from harsh environments Bearing Unique floating design Machine grade bearing bronze material prevents rusting Superior wear characteristics NOTE: Temperature ange -20º to 180º 2

4 How to Order - Pneumatic Tie od Interchangeable ylinders (1 1/2" to 4" Bore) TIE OD BOE OD MOUNT STOKE USHION POT OD END OPTIONS OPTIONS SEIES SIZE TYPE (INHES) TYPE TYPE STYLE (if needed) (if needed) T 20 SS M B26 PS15 1 MP STS T Tie od Interchangeable /2" Bore ylinder 20 2" Bore ylinder /2" Bore ylinder /4" Bore ylinder 40 4" Bore ylinder 3 SS Single End, Std od Size SO Single End, Ovs od Size DS Double End, Std od Size DO Double End, Ovs od Size See od Size and Thread Style hart for description. Port and ushion Position Location Standard Port Positions 1 & 5 Standard ushion Positions 2 & 6 od Size and Thread Style hart orce harts 4 8 Bore od Size *Style #1 *Style #2 Style #3 Male Thread Male Thread emale Thread 1 1/2" Standard (5/8") 7/ /2-20 7/16-20 Oversize (1") 3/4-16 7/8-14 3/4-16 2" Standard (5/8") 7/ /2-20 7/16-20 Oversize (1") 3/4-16 7/8-14 3/ /2" Standard (5/8") 7/ /2-20 7/16-20 Oversize (1") 3/4-16 7/8-14 3/ /4" Standard (1") 3/4-16 7/8-14 3/4-16 Oversize (1 3/8") / " Standard (1") 3/4-16 7/8-14 3/4-16 Oversize (1 3/8") / *Note: Male od Ends are threaded od Studs. M1 M2 MP1 MP2 MP4 MS1 MS2 MS4 MT1 MT2 MX0 MX1 MX2 MX3 5 ront lange Mount ear lange Mount ixed levis Mount Detachable levis Mount Detachable Eye Mount ngle Mount Side Lug Mount Bottom Tap Mount Head Trunnion Mount ap Trunnion Mount Basic No Mount Both Extended Tie od Mount ap Extended Tie od Mount Head Extended Tie od Mount Specify Stroke to Two Decimal Places* Example 1 1/4" = 1.25 Standard Stroke Tolerance ±.031 *or Strokes Exceeding 20 inches onsult actory. N No ushion B15 ushion Both Ends 1 & 5 B26 ushion Both Ends 2 & 6 (STD) B37 ushion Both Ends 3 & 7 B48 ushion Both Ends 4 & 8 5 ushion ap End 5 6 ushion ap End 6 7 ushion ap End 7 8 ushion ap End 8 H1 ushion Head End 1 H2 ushion Head End 2 H3 ushion Head End 3 H4 ushion Head End 4 See Port and ushion Position Location Diagram. PS15 Standard Port Size 1 & 5 (STD) PS26 Standard Port Size 2 & 6 PS37 Standard Port Size 3 & 7 PS48 Standard Port Size 4 & 8 See Port and ushion Position Location Diagram. 1 Style #1 Male Thread (STD) 2 Style #2 Male Thread 3 Style #3 emale Thread See od Size and Thread Style hart for description. EP Enersorb Piston MP Magnetic Piston STS Stainless Steel od VS High Temperature Viton Seals* D02.00 Dual Piston (specify length) od Extension (specify length) T02.00 Thread Extension (specify length) *Not available with EP option The charts below show maximum usable forces. Standard design practices should take factors such as stroke, speed and friction into account when sizing a cylinder. Max Usable ylinder Extend orce, (lbf) Bore 60 psi 80 psi 100 psi 1 1/2" " /2" /4" " Max Usable is 80% of Theoretical. Max Usable ylinder etract orce, (lbf) Bore od Dia. 60 psi 80 psi 100 psi 1 1/2" 5/8" " " 5/8" " /2" 5/8" " /4" 1" /8" " 1" /8"

5 Basic No Mount MX0 BSI NO MOUNT (SINGLE OD END) MX0 BSI NO MOUNT (SINGLE OD) E SQ. E SQ. Y P + STOKE EE NPT (standard) (STNDD) SQ. SQ. SQ. SQ. ØB ØD ØB W (see below) SEE BELOW G LB + STOKE ZB + STOKE J K MX0 BSI NO MOUNT (DOUBLE OD END) Only mounts available for double rod end are: M1, MS1, MS4, MTI, MT4, MXØ, MX1 and MX3. PP + STOKE G LD + STOKE ZM + (2 X STOKE) G Bore od B E G J K P V Y EE LB LD PP D ZB ZM 1 1/2" 2" 2 1/2" 3 1/4" 5/8" / N/ " / N/ /8" / N/ " / N/ /8" / N/ " / N/ " / /8" / " 1" / /8" / od End Styles STNDD MLE OD END (STYLE #1) *STNDD MLE OD END (STYLE #1) D OSS LTS KK THED N LT TUN DOWN V (SEE BOVE) MM OD DI. (SEE BOVE) OVESIZE MLE OD END (STYLE #2) EMLE OD END (STYLE #3) THED E OD END #3) KK THED DEEP W W (SEE BOVE) MM D KK N W 5/8".75 1/2-20 7/ " /8-14 3/ /8" / *Note: Male od Ends are threaded od Studs. 4

6 lange and Trunnion Mounts M1 ONT LNGE MOUNT U T W THU O B BOLT 4 PLES M2 E LNGE MOUNT U T Z + STOKE THU O B BOLT 4 PLES MT1 HED TUNNION MOUNT 1.00 Ø UT XG MT2 P TUNNION MOUNT 1.00 Ø XJ + STOKE UT Bore od W B T U UT XG XJ Z 1 1/2" 2" 5/8" 5/8" /4 5/ " 1" /4 5/ /2" 5/8" / " / /4" 1" / /8" / " 1" / /8" /

7 levis, Eye and ngle Mounts MP1 LEVIS MOUNT L ØD M X + STOKE B Pin included with mount. MP2 DETHBLE LEVIS MOUNT L ØD M L B XD + STOKE Pin included with mount. MP4 DETHBLE EYE MOUNT L ØD M L B XD + STOKE Pin included with mount. MS1 NGLE MOUNT X + STOKE H O O THU O B BOLT 6 PLES S L S + STOKE (dd.88 for Double od End) L T Bore od L M S B H L O T B D L S X X XD 1 1/2" 2" 2 1/2" 3 1/4" 4" 1" / /8" / " / /8" / /8" 5/8" 5/8" /8 3/8 3/ " 1" 1" /8 3/8 3/

8 Side Lug, Bottom Tap and Pneumatic Tie od Mounts MS2 SIDE LUG MOUNT THU O SB BOLT 4 PLES E/ ST TS US XS SS + STOKE (dd for Double od End) MS4 BOTTOM TP MOUNT E/ NT TP TK DEEP 4 PLES TN XT SN + STOKE (Same for Single and Double od End) MX1 BOTH EXTENDED TIE OD MOUNT MX2 P EXTENDED TIE OD MOUNT MX3 HED EXTENDED TIE OD MOUNT W DD THED SQ. BB BB Bore od E/2 BB DD NT SB SN SS ST TK TN TS US W XS XT 1 1/2" 2" 5/8" 5/8" /4-28 5/ /4-20 5/ /8 3/ " 1" /4-28 5/ /4-20 5/ /8 3/ /2" 5/8" / /8-16 3/ " / /8-16 3/ " /8-24 1/2-13 1/ /4" 1 3/8" /8-24 1/2-13 1/ " 1" /8-24 1/2-13 1/ /8" /8-24 1/2-13 1/

9 ccessories OD LEVIS E B OD EYE E B L ØD D ØD H OSS LTS KK THED 2 x D KK THED Part # L B D H E KK KL /16-20 KL /4-16 KL KL /2-20 KL /8-14 KL /4-12 Pin and jam nut included. Part # B D E KK KL /16-20 KL /4-16 KL KL /2-20 KL /8-14 KL /4-12 Pin and jam nut included. EYE BKET L B LEVIS BKET L B L M B SQ. E SQ. L M B SQ. E SQ. ØD M THU O DD BOLT 4 PLES ØD M DD THED THU 4 PLES Description Eye Brackets levis Brackets Pin included. Part# E M B B D DD L L M KL N/ 3/ KL N/ 1/ KL N/ 5/ KL N/ 5/ KL / KL / KL / KL / PIVOT PIN OD STUD ND STEP STUD JM NUT B 2 x B ØD Part# B D KL KL KL KL etaining ings included. KK THD THD Part # KK L /16-20 L /4-16 L L /2-20 7/16-20 L /8-14 3/4-16 L / or Stainless Steel, place the letter S after the Part Number. or example: L648S. D THD Part # B D L /16-20 L /2-20 L /4-16 L /8-14 L L /4-12 or Stainless Steel, place the letter S after the Part Number. or example: L680S. 8

10 od Diameter Selection ylinder thrust load, mounting style and stroke are the three main factors in determining rod diameter. ylinder thrust loads can be determined from the max usable cylinder extend force charts on page 3. The mounting style can be determined using the drawings below. Once the thrust load, mounting style and stroke are known, the rod diameter chart can be used to determine the rod diameter. Example: 2 1/2" cylinder bore 80 psi air pressure ylinder thrust load = 314 pounds (from page 3) M1 mount with od levis 60" stroke Mounting style = Style #2 (from drawings below) rom the rod diameter chart 5/8" rod diameter has a load rating of 122 pounds Therefore, the 1" rod diameter must be used. 1" rod diameter has a load rating of 796 pounds MOUNTING STYLE DWINGS STYLE #1 STYLE #3 OD IXED & SUPPOTED: M1, M2, MS1, MS2, MS4, MX0, MX1, MX2, MX3 MOUNTS OD PIVOTED & SUPPOTED: MT1 MOUNT STYLE #2 STYLE #4 OD PIVOTED & SUPPOTED: M1, M2, MS1, MS2, MS4, MX0, MX1, MX2, MX3 MOUNTS OD PIVOTED & SUPPOTED: MP1, MP2, MP4, MT2 MOUNTS OD UNSUPPOTED: M1, M2, MS1, MS2, MS4, MX0, MX1, MX2, MX3 MOUNTS OD DIMETE HT* Maximum llowable ylinder Thrust Load Stroke Mounting Style #1 Mounting Style #2 Mounting Style #3 Mounting Style #4 Length 5/8" od 1" od 1 3/8" od 5/8" od 1" od 1 3/8" od 5/8" od 1" od 1 3/8" od 5/8" od 1" od 13/8" od 15" " " " " " *or Strokes Exceeding 20 inches; consult factory. 9

11 Dual Piston Selection Dual Pistons (two pistons with a spacer in between) are needed in some cylinders with long strokes. The purpose of a dual piston is to prevent binding or jack-knifing. Below is a chart that shows dual piston length in relation to mounting style (from previous page) and stroke. DUL PISTON HT Stroke Minimum Dual Piston Length Length Mounting Style #1 Mounting Style #2 Mounting Style #3 Mounting Style #4 20" " /2 30" " " /2 4 pproximate ylinder Weight hart (lbs.) Bore 1 1/2" 2" 2 1/2" 3 1/4" 4" MX1, MX2 od MX0 M1 MP1, MP2 MT1 Per inch MX3, MS1, Diameter MS4 M2 MP4 MS2 MT2 of stroke 5/8" " /8" " /8" " " /8" " /8" lignment oupler KK THED G OSS LTS Ø SHNK D KK THED DEEP B E OSS LTS Part # B D E G KK Max Pull Load L / ,500 LB. L /2-20 3,500 LB. L /4-16 8,500 LB. L /8-14 8,500 LB. L ,000 LB. L / ,000 LB. (1/16" DIL LOT) (1º SPHEIL LOT) Sensor information is available on page

12 How to Order: Pneumatic Tie od Pin-ct ylinder (1 1/2" to 4" Bore) SEIES BOE SIZE OD SIZE MOUNT TYPE STOKE (inches) USHION TYPE POT TYPE THED STYLE OPTIONS (if needed) OPTIONS (if needed) PØ B B 1 1 S15 9 P PØ NP Shot Pin ylinder 4 1 ront lange Mount 6 No ushion 2 B D E 1 1/2" Bore ylinder 2" Bore ylinder 2 1/2" Bore ylinder 3 1/4" Bore ylinder 4" Bore ylinder 2 S1 S2 S4 X0 X1 ear lange Mount ngle Mount Side Lug Mount Bottom Tap Mount Basic No Mount Both Extended Tie od Mount B ushion Both Ends 1 & 5 ushion Both Ends 2 & 6 (STD) D ushion Both Ends 3 & 7 E ushion Both Ends 4 & 8 ushion ap End 5 G ushion ap End 6 X2 ap Extended Tie od Mount H ushion ap End 7 3 Single End, Standard od Size* X3 od Extended Tie od Mount I ushion ap End 8 B Single End, Oversize od Size J ushion Head End 1 D Double End, Standard od Size* Double End, Oversize od Size 5 Specify Stroke to Two Decimal Places* Example 1 1/2" = 1 K ushion Head End 2 L ushion Head End 3 *NOTE: 3-1/4 and 4 bore only. Standard Stroke Tolerance +/-.031 M ushion Head End 4 *onsult actory above 4.00 inches stroke. Not available for 1 1/2 Bore. Port and ushion Location Standard Port Position 1 & 5 Standard ushion Position 2 & S15 Standard Port Size 1&5 (STD) S26 Standard Port Size 2 & 6 S37 Standard Port Size 3 & 7 S48 Standard Port Size 4 & od Size and Thread Style hart Bore od Size Style #1 Style #2 Style #3 Style #9 Male Male emale one Point Thread Thread Thread Thread 1 1/2" Oversize (1") 3/4-16 7/8-14 3/4-16 1/2-20 2" Oversize (1") 3/4-16 7/8-14 3/4-16 1/ /2" Oversize (1") 3/4-16 7/8-14 3/4-16 1/ /4" Standard (1") 3/4-16 7/8-14 3/4-16 1/ /4" Oversize (1 3/8") / /8-18 4" Standard (1") 3/4-16 7/8-14 3/4-16 1/2-20 4" Oversize (1 3/8") / /8-18 NOTE: Male rod ends are threaded rod studs. The following chart shows maximum static side loads per rod size and stroke. Standard design practices should take factors such as impact and shot pin friction into account when selecting a cylinder and rod diameter Style #1 Male Thread 2 Style #2 Male Thread 3 Style #3 emale Thread 8 Style #8 Blunt End 9 Style #9 one Point Thread 9 EP Enersorb Piston MP Magnetic Piston P1 45º one Point* P2 60º one Point* STS Stainless Steel od VS Viton Seals Dxx.xx Dual Piston (specify length) xx.xx od Extension (specify length) Txx.xx Thread Extension (specify length) *Style #9 thread required. Not available wih EP option Maximum Side Loads (lbf) od Dia. 1" Stroke 2" Stroke 3" Stroke 4" Stroke 1" /8"

13 Basic Dimensions (X0 Mount) The basic mounting (X0) is shown below; however other mounting styles are available. Special note: 1, S1, X1 mounts are added to the bearing block face. Y EE NPT POTS P K EP SQ. SQ. DD TP X GG DEEP 4 PLES 4.00 G LB + STOKE J ZB + STOKE Bore od Y P G J EE LB EP K ZB DD TP GG DEPTH 1 1/2" 1" / / " 1" / / /2" 1" / / /4" 4" 1" / / /8" / / " / / /8" / / od End Styles D OSS LTS D OSS LTS HH TP X JJ DEEP ØN TUNDOWN OD DI. ØN TUNDOWN ØHJ NOTE: See page 4 for od End Styles #1, #2 and #3. OD DI..250 one Point Styles P PB HH THED P PB HH THED PE D PD D 45 OD DI. ØHK 60 OD DI. ØHK od Dia. D HH HJ HK PB P PD N PE JJ 1".81 1/ /8" /

14 lange and ngle Mounts 1 ONT LNGE MOUNT U T THU O B BOLT 4 PLES 2 E LNGE MOUNT Z + STOKE U T THU O B BOLT 4 PLES S1 NGLE MOUNT X + STOKE H O O THU O B BOLT TYPIL 6 PLES S L S + STOKE L T Bore od E S B B T U Z L O H T S X 1 1/2" 1" /8 1/ " 1" /8 5/ /2" 1" /8 5/ /4" 4" 1" /2 3/ /8" /2 3/ " /2 3/ /8" /2 3/

15 Side Lug, Bottom Tap and Pneumatic Tie od Mounts S2 SIDE LUG MOUNT THU O SB BOLT 4 PLES E/ ST TS US XS SS + STOKE S4 BOTTOM TP MOUNT SQ E/ NT THED TK DEEP TYPIL 4 PLES TN XT SN + STOKE X1 BOTH ENDS EXTENDED TIE ODS X2 P EXTENDED TIE ODS X3 HED EXTENDED TIE ODS DD THED EP SQ. SQ. BB BB Bore od E/2 ST SB TS US XS SS TN NT TK XT SN DD BB 1 1/2" 1" / /4-20 UN /4-28 UN " 1" / /16-18 UN /16-24 UN /2" 1" / /8-16 UN /16-24 UN /4" 4" 1" / /2-13 UN /8-24 UN 1 1 3/8" / /2-13 UN /8-24 UN 1 1" / /2-13 UN /8-24 UN 1 1 3/8" / /2-13 UN /8-24 UN 1 Sensor information is available on page

16 How to Order - Pneumatic Tie od Interchangeable ylinders (5" to 10" Bore) SEIES BOE SIZE OD SIZE MOUNT TYPE STOKE (inches) USHION TYPE POT TYPE OD END STYLE OPTIONS (if needed) OPTIONS (if needed) T 80 SS M1 1 B26 PS15 1 MP STS T NP Interchangeable ylinder 4 ME3 ront Mounting Holes (8"-10") 6 N No ushion ME4 ear Mounting Holes (8"-10") B15 ushion Both Ends 1 & " Bore ylinder M1 ront lange Mount (5"-6") B26 ushion Both Ends 2 & 6 (STD) 60 6" Bore ylinder M2 ear lange Mount (5"-6") B37 ushion Both Ends 3 & " Bore ylinder MP1 ixed levis Mount B48 ushion Both Ends 4 & " Bore ylinder MP2 Detachable levis Mount H1 ushion ap End 5 MS1 ngle Mount (5"-8") H2 ushion ap End 6 3 SS Single End, Standard od Size MS4 Bottom Tap Mount H3 ushion ap End 7 SO Single End, Oversize od Size MT1 Head Trunnion Mount (5"-8") H4 ushion ap End 8 DS Double End, Standard od Size MT2 ap Trunnion Mount (5"-8") 5 ushion Head End 1 DO Double End, Oversize od Size MT4 Mid Trunnion Mount (5"-8") 6 ushion Head End 2 MX0 Basic No Mount 7 ushion Head End 3 Port and ushion Location MX1 Both Extended Tie od Mount Standard Port Position 1 & 5 8 ushion Head End 4 Standard ushion Position 2 & 6 MX2 ap Extended Tie od Mount MX3 Head Extended Tie od Mount 7 PS15 Standard Port Size 1 & 5 (STD) 5 6 PS26 Standard Port Size 2 & Specify Stroke to Two Decimal Places PS37 Standard Port Size 3 & 7 Example 1 1/2" = 1 Standard PS48 Standard Port Size 4 & Stroke Tolerance +/-.031 od Size and Thread Style hart Bore od Size Style #1 Style #2 Style #3 Male Thread Male Thread emale Thread 5 Standard (1") 3/4-16 7/8-14 3/4-16 Oversize (1 3/8") / Standard (1 3/8") / /4 Oversize (1 3/4") 1 1/ / / Standard (1 3/8") / Oversize (1 3/4") 1 1/ / / Standard ( 1 3/4") 1 1/ / /4-12 Oversize (2") 1 1/ / /2-12 orce hart 7 The force charts show maximum usable forces which is 80% of theoretical. Standard design practices should take factors such as stroke, speed and friction into account when sizing a cylinder. 4 3 Max Usable Extend & etract 100 psi Bore 5" od Dia. (in) 1" 1 3/8" Ext. (lbf) 1571 etract (lbf) " 8" 10" 1 3/8" /4" /8" /4" /4" " Style #1 Male Thread (STD) 2 Style #2 Male Thread 3 Style #3 emale Thread 9 OP ir/oil Piston xx.xx djustable Stroke (specify length) BPP Bumper Piston Dxx.xx Dual Piston (specify length) H psi Hydraulic LS Low riction Seals MP Magnetic Piston MS Metallic od Scraper xx.xx od Extension (specify length) ST Steel ylinder Tube SE Studded od End SST Stainless Steel Tie ods & asteners STS Stainless Steel od Txx.xx Thread Extension (specify length) UB Urethane Bumper VS Hi-Temp Viton Seals EP Enersorb Piston 15

17 Basic No Mount MX0 BSI NO MOUNT (SINGLE OD END) MX0 BSI NO MOUNT (DOUBLE OD END) E SQ. Y P + STOKE EE NPT (STNDD) P + STOKE SQ. ØB W K G G ØD SEE BELOW G LB + STOKE J LD + STOKE ZB + STOKE ZM + (2 X STOKE) Only mounts available for double rod end are: ME3, M1, MS1, MS4, MTI, MT4, MXØ, MX1 and MX3. Bore od B E G J K P V Y EE LB LD D W ZB ZM 5" 1" / N/ /8" / N/ " 1 3/8" / N/ /4" / N/ " 1 3/8" / /4" / " 1 3/4" " od End Styles STNDD MLE OD END (STYLE #1) KK THED V (SEE BOVE TBLE) MM OD DI. (SEE BOVE TBLE) MM KK 1" /8-14 3/ /8" / /4" / /4-12 2" / /2-12 (SEE BOVE TBLE) OVESIZE MLE OD END (STYLE #2) EMLE OD END (STYLE #3) THED KK THED DEEP 16

18 ME3 ONT MOUNTING HOLES (8" ND 10" BOE ONLY) E SQ. TE SQ. W Ø D B THU 4 PLES G ZB + STOKE ME4 E MOUNTING HOLES (8" ND 10" BOE ONLY) E SQ. TE SQ. Z + STOKE J B THU 4 PLES M1 ONT LNGE MOUNT (NOT VILBLE 8" ND 10" BOE USE ME3) U T H E B THU 4 PLES W ZB + STOKE M2 E LNGE MOUNT (NOT VILBLE 8" ND 10" BOE USE ME4) H U T E Z + STOKE B THU 4 PLES Bore od E G J W B H D TE T U W Z ZB 5" 1" 5.63 N/ N/ /16.63 N/ N/ N/ /8" 5.63 N/ N/ /16.63 N/ N/ N/ " 1 3/8" 6.63 N/ N/ /16.75 N/ N/ N/ /4" 6.63 N/ N/ /16.75 N/ N/ N/ " 1 3/8" N/ N/ 11/16 N/ N/ N/ /4" N/ N/ 11/16 N/ N/ N/ " 1 3/4" N/ N/ 13/16 N/ N/ N/ " N/ N/ 13/16 N/ N/ N/

19 levis and Bottom Mounts MP1 IXED LEVIS MOUNT (PIN INLUDED WITH MOUNT) 5"- 8" BOES E EXTUDED WITH BEING; 10 BOE IS WELDED L Ø D M M X + STOKE B MP2 DETHBLE LEVIS MOUNT (PIN INLUDED WITH MOUNT) L Ø D M XD + STOKE L B MS1 NGLE MOUNT (5"- 8" BOE ONLY) X + STOKE H O O B THU 6 PLES S L S + STOKE L T NOTE: S dimensions increase 1/2" plus one on double rod cylinders. MS4 BOTTOM TP MOUNT E/2 NT TP TK DEEP 4 PLES TN XT SN + STOKE Bore od E/2 L M S B H L O T B D L NT S SN TK TN X X XD XT 5" 1" / / /8" / / " 1 3/8" / / /4" / / " 1 3/8" / N/ 3/ N/ /4" / N/ 3/ N/ " 1 3/4" N/ N/ N/ N/ N/ N/ N/ 1-8 N/ N/ 10 N/ " N/ N/ N/ N/ N/ N/ N/ 1-8 N/ N/ 10 N/

20 Trunnion & Pneumatic Tie od Mount MT1 HED TUNNION MOUNT (10 BOE NOT VILBLE) TL TYP Ø TD UT XG MT2 P TUNNION MOUNT (10 BOE NOT VILBLE) TL TYP Ø TD XJ + STOKE UT MT4 MID TUNNION MOUNT (10 BOE NOT VILBLE) TL TYP BD EB Ø TD TM UM XI (USTOME TO SPEIY TO TWO DEIML PLES) MX1 BOTH EXTENDED TIE OD MOUNT MX2 P EXTENDED TIE OD MOUNT MX3 HED EXTENDED TIE OD MOUNT W DD THED SQ. BB BB NOTE: ound retainer used to retain bushing, not a full front plate as other bores. BB dimensioned from head for 8" & 10" bores. Bore od BB* BD DD EB TD TL TM UM UT W XG XI XJ 5" 1" / /8" / " 1 3/8" / /4" / " 1 3/8" / /4" / " 1 3/4" N/ 3/4-16 N/ N/ N/ N/ N/ N/ 1.88 N/ N/ N/ 2" N/ 3/4-16 N/ N/ N/ N/ N/ N/ 2.00 N/ N/ N/ ustomer to Specify (2 decimal places) 19

21 ccessories OD LEVIS (PIN ND JM NUT INLUDED) LEVIS BKET (PIN INLUDED) E B L B L E ØD L L M B SQ. E SQ. H OSS LTS KK THED Part # E L B D H E KK KL /4-16 KL KL /4-12 KL /2-12 M ØD DD THED Part # E M B B D DD L L M L KL / KL / KL / OD EYE (PIN ND JM NUT INLUDED) EYE BKET (PIN INLUDED) D E B L ØD L M B SQ. B E SQ. 2 X D KK THED ØD M DD THU Part # B D E KK KL /4-16 KL KL /4-12 KL /4-12 Part # E M B B D DD L L M KL / KL / KL / LIGNMENT OUPLE (1/16" DIL LOT, 1 DEG. SPHEIL LOT) PIVOT PIN (ETINING INGS INLUDED) D B B E OSS LT KK THED ØD G OSS LTS Ø SHNK KK THED DEEP Part # B D E G KK Max Pull Load L /4-16 8,500 LB. L /8-14 8,500 LB. L ,000 LB. L / ,000 LB. L / ,000 LB. L / ,000 LB. Part # B D KL KL KL KL NOTE: Safety factor of four compared to yield point. 20

22 Sensors SWITH PT NUMBES (1 1/2-2 1/2 BOE) Switch type 9 ft. lead 8mm quick connect* eed KL690 KL693 Electronic PNP KL691 KL694 Electronic NPN KL692 KL695 *Supplied with 15 ft. connecting cable. SWITH PT NUMBES (3 1/4-10 BOE) Switch type 9 ft. lead 8mm quick connect* eed KL690-4 KL693-4 Electronic PNP KL691-4 KL694-4 Electronic NPN KL692-4 KL695-4 *Supplied with 15 ft. connecting cable. B.91 Bore B 1 1/ / / eed Switch Specifications unction SPST normally open Switching voltage VD/V 50/60 Hz Switching current.030 mp max..001 mp min. Switching power 4 Watts max. Switching speed.5 ms operate.1 ms release Voltage drop 3.5 volts WIING DIGM Brown (or Pin 1) Supply White (or Pin 3) Load eed Switch Load can be connected as sinking or sourcing. Power supply polarity need not be observed. 8 MM QUIK ONNET BLE PIN DESIGNTION Brown = Pin 1 Blue = Pin 3 Black = Pin 4 Electronic Switch Specifications unction PNP or NPN output Normally open Switching voltage 6-24 VD Switching current 0 mp max. Switching power 12 Watts max. Switching speed 1.5 µs operate.5 µs release Voltage drop 1.0 volts WIING DIGM Supply White (or Pin 3) Green (or Pin 4) + Brown (or Pin 1) Load Power supply polarity must be observed for proper operation. Supply NOTE: The Magnetic Piston option, MP, must be ordered when using switches. + PNP Switch White (or Pin 3) Brown (or Pin 1) Load NPN Switch Green (or Pin 4) 21

23 utomotive Shot Pin The Non-otating Pin-ct is used in many automotive applications, but primarily as a welding shot pin cylinder. The minimal deflection and high repeatability make this product ideal for all pin locating applications. onsult factory for pricing and How to Order. ir-transfer System Shaker Shaker Systems are pneumatically driven eeder/beltless onveyor systems. These systems are ideal for the stamping industry or other parts transfer and scrap removal applications. onsult factory for pricing and How to Order. Special onditions and Limited Warranty Determination of the suitability of any information or product for the application contemplated by any user or the manner of that use is the sole responsibility of the user. ompact utomation Products, LL reserves the right to improve or change designs without notice. ll orders are subject to acceptance by the factory sales department. ompact utomation Products, LL agrees to repair or replace to the original purchaser any standard parts or products for a period of 12 months from date of shipment which ompact utomation Products, LL determines upon inspection to be defective in workmanship or material. Wear components including but not limited to seals and bearings are excluded from this warranty. Under no circumstance may merchandise be returned without written authorization from the factory. This warranty is void in the event the product has been tampered with, altered, or serviced by unauthorized personnel. ompact utomation Products, LL's total responsibility for any claims, damages, losses or liabilities related to the product covered thereunder shall not exceed the purchase price of such product. In no event shall ompact utomation Products, LL be liable for any special, indirect, incidental or consequential damages of any character, including but not limited to loss of use of productive facilities or equipment, lost profit, property damage, transportation, installation or removal or lost production whether suffered by purchaser or third party. ompact utomation Products, LL disclaims all liability for any and all cost, claims demands, charges, expenses, and other damages, either direct or indirect, incident to all property damage arising out of any cause of action based on strict liability. This warranty gives you specific legal rights and you may have other rights, which vary from state to state. 22

24 Turn-ct 105 ommerce Way Westminster, S Tel: ax: T M 07/16