STAR High Pressure Threaded Fittings

Transcription

1 STR High ed Fittings NOV Fiber Glass Systems provides a broad range of high pressure fiberglass fittings and accessories to accompany our high pressure line pipe. This allows for a complete corrosion free piping system. ll of these fittings are manufactured using the filament winding method of fabrication, using premium glass fibers, and quality epoxy resins. This ensures maximum pressure capabilities of these composite elements. Features for these fiberglass pipe fittings include: ratings are per STR Standard Design. For PI 15HR pressure ratings, refer to table below. Multiple pressure classes at design temperature Design temperature of 200 F (93 C) PI 5 EUE or OD rd or 10rd threaded connections Multiple sizes to match all of the manufactured pipe sizes and pressure classes Mill tested to 1.25 times Design Cyclo-aliphatic amine cured epoxy resin system (all fittings unless otherwise shown) General Notes: 1. ll fittings center line to face dimensions are nominal ± ¼ inch (6. mm). 2. ll fittings are filament wound fiberglass reinforced epoxy. 3. sizes correspond to thread types listed in product specifications. ll 1½ EUE 10rd and ½ EUE rd PI threads conform to PI 5 Table 2.6a (L is minimum) and all 5½ OD rd casing threads conform to PI 5 Table 2.3 (L is minimum). The 2-12 Star Super Seal is a proprietary connection.. The insertion depth or make-up length loss is listed by size under ( or X 2 ) as inches per connection. 5. Typical dimensions are listed one time per section. 6. Weights are approximate. 7. Dimensions are U.S. Customary converted to metric.. PI 15HR fittings require higher rated fittings according to the following table. 9. ll fittings are designated by thread size based on pressure class of the pipe. 10. When ordering flanged valves, the NSI bolt pattern should match the bolt pattern of the fiberglass flange. Some high pressure (>3000 ) line pipe use a larger thread size, requiring a different NSI bolt pattern. PI 15HR With Factor Equivalent Standard Design vailable Standard Design Fitting 500 x 1.20 = x 1.20 = x 1.20 = x 1.20 = x 1.20 = x 1.20 = x 1.20 = x 1.20 = x 1.20 = x 1.20 = x 1.20 = x 1.20 = fgspipe@nov.com

2 90 Elbow Female x Female ches (kg) (10,0) 3.0 (76,2) 2.06 (52,) (1,1) 2500 (17,2) 3.2 (1,3).5 (2,0) 3000 (20,7) 3. (6,) 5 (2,27) (96,5) 6 (2,72) (127,0) 3.2 (1,3) 5 (2,27) (91,) 6 (2,72) 2500 (17,2) 3.9 (99,1) 7.5 (3,0) 3000 (20,7).2 (106,7) 9.5 (,31) (119,) 13 (5,90) (16,1) 3.9 (99,1) (2,95) (109,2) (3,63) 2500 (17,2).6 (116,) 10 (,5) 3000 (20,7) 5.0 (127,0) 12 (5,) (17,3) 15 (6,0) 3 ½ (165,1).7 (119,) (3,63) (132,1) 12.5 (5,67) 2500 (17,2) 5.6 (12,2) 17 (7,71) 3000 (20,7) 6.0 (152,) 2 (12,7) (177,) 0 (1,1) ½ (203,2) 5.9 (19,9) 20 (9,07) (170,2) 29 (13,15) 2500 (17,2) 7.2 (12,9) 37 (16,7) 3000 (20,7) 7.7 (195,6) 35 (15,) (21,) 5 (20,1) 5 ½ 00 (5,5) (25,0) 6.3 (160,0).3 2 (12,70) (172,7) 36 (16,33) (195,6) 0 (1,1) 3000 (20,7). (223,5) 52 (23,59) (251,5) 70 (31,75) (5,5).75 (222,3) 7.6 (193,0) 30 (13,61) 1000 (6,9) 7.9 (200,7) 33 (1,97) (20,3) 0 (1,1) (21,) 5 (20,1) (233,7) 67 (30,39) 7 00 (5,5) 9.75 (27,7).1 (205,7) 3 (17,2) (221,0) (21,77) (2,9) 57 (25,5) 2500 (17,2) 10.5 (266,7) 67 (30,39) 5 00 (5,5) (25,0) 9.9 (251,5).5 35 (15,) 1000 (6,9) 10.2 (259,1) 0 (1,1) (271,) 7 (21,32) (21,9) 57 (25,5) (30,) 73 (33,11) (29,5) 12.3 (311,2) 75 (3,02) (337,) 5 (3,56) 2

3 90 Elbow Female x Female (continued) ches SSS 00 (5,5) (266,7) 10.0 (25,0) 37 (16,7) 1000 (6,9) 10.3 (261,6) 5 (20,1) (27,3) 5 (20,1) 10 SSS 500 (3,) (25,0) 12.6 (320,0) 5.0 (137,2) 62 (2,12) 00 (5,5) 13.3 (337,) 75 (3,02) 1000 (6,9) 13. (350,5) 7 (39,6) (365,) 105 (7,63) 12 SSS 500 (3,) (336,6) 1.6 (370,) 6.10 (15,9) 7 (33,57) 00 (5,5) 15. (391,2) 95 (3,09) 1000 (6,9) 16.0 (06,) 10 (7,17) (21,6) 125 (56,7) (kg) 5 Elbow Female x Female ches (kg) (73,7) 2.06 (52,) 3.5 (1,59) 2500 (17,2) 3.1 (7,7) (1,1) 3000 (20,7) 3.3 (3,) 5 (2,27) (9,0) 6 (2,72) (10,0) 3.2 (1,3) 3.5 (1,59) (91,) 5 (2,27) 2500 (17,2) 3. (96,5) 6.2 (2,1) 3000 (20,7).0 (101,6) 7.5 (3,0) (,99) (117,5) 3. (96,5) 2. 6 (2,72) (106,7) 7 (3,1) 2500 (17,2).5 9 (,0) 3000 (20,7). (121,9) 11 (,99) (137,2) 12 (5,) 3 ½ (127,0).6 (116,) (3,63) (129,5) 13 (5,90) 2500 (17,2) 5.5 (139,7) 15 (6,0) 3000 (20,7) 5. (17,3) 25 (11,3) (167,6) 3 (17,2) ½ (152.) 5. (17,3) 16 (7,26) (165,1) 21 (9,53) 2500 (17,2) 7.0 (177,) 25 (11,3) 3000 (20,7) 7.5 (190,5) 30 (13,61) (210,) 0 (1,1) 3

4 5 Elbow Female x Female (continued) 30 Elbow Female x Female ches 5 ½ 00 (5,5).25 (209,6) 6.2 (157,6).3 22 (9,9) (170,2) 30 (13,61) (190,5) 3 (15,2) 2500 (17,2).0 (203,2) 0 (1,1) 3000 (20,7).5 (215,9) 50 (22,6) (23,) 65 (29,) (5,5) (16,3) 7.6 (193,0) 25 (11,3) 1000 (6,9) 7. (197,1) 2 (12,70) (205,7) 3 (15,2) (215,9) 3 (17,2) (231,1) 3 (19,50) 7 00 (5,5) (193,7).0 (203,2) 32 (1,51) (21,) 30 (13,61) (23,) 2 (19,05) 2500 (17,2) 10.2 (259,1) 55 (2,95) 5 00 (5,5) (1,2) 9.9 (251,5) 33 (1,97) 1000 (6,9) 10.2 (259,1) 37 (16,7) (269,2) 5 (20,1) (279,) 50 (22,6) (30,) 67 (30,39) (17,3) 12.3 (312,) 62 (2,12) (335,3) 0 (36,29) SSS (222,25) 10.0 (25,0) 3 (15,2) 1000 (6,9) 10.3 (261,6) 2 (19,05) (27,3) (21,77) 10 SSS 500 (3,) 10.0 (25,0) 12. (315,0) 5.0 (137,2) 3 (17,2) 00 (5,5) (23,13) 1000 (6,9) 13.5 (32,9) 75 (3,02) (35,1) 100 (5,36) 12 SSS 500 (3,) 11.5 (292,1) 1.6 (370,) 6.10 (15,9) 55 (2,95) ches 00 (5,5) 15.3 (3,6) 66 (29,9) 1000 (6,9) 16.0 (06,) 11 (51,71) (21,6) 129 (5,51) (kg) (10,0) 3.2 (1,3) 3.5 (1,59) (91,).5 (2,0) 2500 (17,2) 3. (96,5) 6 (2,72) 3000 (20,7).0 (101,6) (3,63) (,0) 5 00 (5,5) (1,2) 9.9 (251,5) 22 (9,9) 1000 (6,9) 10.2 (259,) 2 (12,70) (269,2) 3 (15,2) (279,) (19,96) (17,3) 12.1 (307,3) 53 (2,0) (27,66) (kg)

5 22.5 Elbow Female x Female ches (101,6) 3.2 (1,3) (6,3) 3 (1,36) (1,1) 2500 (17,2) 3. (96,5) 5 (2,27) 3000 (20,7).0 (101,6) 7 (3,1) (3,6) 3 ½ (116,) 5.5 (2,9) (129,5) 9 (,0) 2500 (17,2) 5. (137,2) 11 (,99) 3000 (20,7) 5.7 (1,) 13.5 (6,12) (162,5) 19 (,62) ½ (127,0) 5. (17,3) 10 (,5) (162,6) 16.5 (7,) 2500 (17,2) 6. (172,7) 21 (9,53) 3000 (20,7) 7.3 (15,) 25.5 (11,57) (205,7) 36.5 (16,56) 5 ½ 00 (5,5).250 (209,6) 6.2 (157,5).3 9 (,0) (167,6) 13.5 (6,12) (1,0) 23. (10,61) 3000 (20,7). (213,) 36.5 (16,56) (236,2) 52 (23,59) (5,5) 5.75 (16,1) 7.5 (190,5) 11 (,99) 1000 (6,9) 7. (19,1) 15 (6,0) (203,2) 1 (,16) (226,1) 30 (13,61) (165,1).5 (215,9) 21 (9,53) (21,3) 36.5 (16,56) 2500 (17,2) 10.1 (256,5) 7.5 (21,55) 5 00 (5,5) 5.75 (19,2) 9. (2,9) 20 (9,07) 1000 (6,9) 10.1 (256,9) 26 (11,79) (266,7) 32 (1,51) (276,9) 0 (1,1) (17,3) 12.1 (307,3) 50 (22,6) (27,) SSS 00 (5,5).75 (222,25) 9. (29,0) 30 (13,60) 1000 (6,9) 10.2 (259,1) 3 (17,2) 1250 (,5) 10.5 (266,7) 2 (19,05) 10 SSS 500 (3,).17 (20,0) 12.5 (317,5) 5.0 (137,2) 25.5 (11,57) 00 (5,5) (19,5) 1000 (6,9) 13.5 (32,9) 50 (22,6) 1250 (,5) 1.1 (35,1) 60 (27,22) 12 SSS 500 (3,) (2,9) 1.5 (36,3) 6.10 (15,9) 30.5 (13,3) 00 (5,5) 15.1 (33,5) 5. (20,77) 1000 (6,9) 15.7 (39,) 63.2 (2,66) 1250 (,5) 16.3 (1,0) 70 (31,75) (kg) 5

6 11.25 Elbow Female x Female ches (1,3) 3 (1,36) (kg) (1,1) 2500 (17,2) 3. (96,5) 5 (2,27) 3000 (20,7).0 (101,6) 7 (10,) (12,7) 3 ½ (139,7).5 5 (2,27) (127,0) (3,63) 2500 (17,2) 5.3 (13,6) 10 (,5) 3000 (20,7) 5.7 (1,) 12 (5,) (160,0) 17 (7,71) ½ (152,) 5.7 (1,) 9 (,0) (162,6) 15 (6,0) 2500 (17,2) 6. (172,7) 19 (,62) 3000 (20,7) 7.2 (12,9) 23 (10,3) (205,7) 33 (1,97) 5 ½ 00 (5,5).250 (209,6) 6.2 (157,5).3 (3,63) (167,6) 12 (5,) (15,) 21 (9,53) 3000 (20,7).3 (210,) 33 (1,97) (236,2) 7 (21,32) (5,5) (16,3) 7.5 (190,5) 10 (,5) 1000 (6,9) 7.7 (195,6) 13 (19,3) (203,2) 16 (7,26) (226,1) 27 (12,25) (193,7).5 (215,9) 19 (,62) (23,) 33 (1,97) 2500 (17,2) 10.0 (25,0) 3 (19,50) 5 00 (5,5) (1,2) 9. (2,9) 1 (,16) 1000 (6,9) 10.1 (256,5) 2 (10,9) (266,7) 29 (13,15) (27,3) 36 (16,33) (17,3) 12.1 (307,3) 39 (17,69) (2,95) 6

7 11.25 Elbow Female x Female (continued) ches SSS 00 (5,5).75 (222,25) 9. (2,9) 27 (12,2) 1000 (6,9) 10.1 (256,5) 35 (15,7) (2,9) 35 (15,) 10 SSS 500 (3,).16 (20,0) 12.5 (317,5) 5.0 (137,2) 22 (9,9) 00 (5,5) 13.2 (335,3) 39 (17,69) 1000 (6,9) 13.5 (32,9) 6 (20,7) (355,6) 5 (26,31) 12 SSS 500 (3,) (25,) 1. (365,) 6.10 (15,9) 3 (17,2) 00 (5,5) 15.2 (36,1) 66 (29,9) 1000 (6,9) 15.6 (396,2) 3 (37,65) (11,) 106 (,0) (kg) Tee Female x Female ches C (123,) 3.0 (76,2) 2.06 (52,) 5.5 (2,9) 2500 (17,2) 3.2 (1,3) 6.5 (2,95) 3000 (20,7) 3. (6,) 7.5 (3,0) (99,1) 10 (,5) (133,) 5.75 (16,1) 3.3 (3,) (3,63) (9,0) 10 (,5) 2500 (17,2).0 (101,6) 11 (,99) 3000 (20,7).2 (106,7) 12 (5,) 000. (121,9) 17 (7,71) (16,) 6.50 (165,1) 3.9 (99,1) (,5) (111,) 12 (5,) 2500 (17,2). (121,9) 1 (6,35) 3000 (20,7) 5.2 (132,1) 1 (,16) (19,9) 2 (12,7) 3 ½ (165,1) 7.25 (1,2). (121,9) 1 (6,35) (137,2) 21 (9,53) 2500 (17,2) 5.9 (19,9) 26 (11,79) 3000 (20,7) 6.3 (160,0) 50 (22,6) (12,9) 65 (29,) ½ 1250 (6,9) 7.50 (190,5).25 (209,6) 6.0 (152,) 25 (11,3) (172,7) 39 (17,69) 2500 (17,2) 7.3 (15,) (21,77) 3000 (20,7) 7.9 (200,7) 75 (3,02) (226,1) 5 (3,56) 5 ½ 00 (5,5) 9.00 (22,6) 9.75 (27,7) 6. (162,7).3 32 (1,51) (175,3) 3 (19,5) (19,1) 70 (31,75) 3000 (20,7) 9.1 (231,1) 100 (5,36) (259,1) 115 (52,16) (kg) 7

8 Tee Female x Female (continued) ches C (kg) (5,5).50 (215,9) 9.25 (235,0) 7.7 (195,6) 36 (16,33) 1000 (6,9).0 (203,2) 2 (19,05) (213,) 60 (27,22) (221,0) 70 (31,75) (21,3) 0 (36,29) 7 00 (5,5) 9.75 (27,7) 10.5 (266,7).2 (20,3) 5 (20,1) (226,1) 65 (29,) (255,3) 75 (3,02) 2500 (17,2) 10.9 (275,6) 100 (5,36) 5 00 (5,5) (25,0) (273,1) 10.1 (261,6) 50 (22,6) 1000 (6,9) 10.5 (266,7) 60 (27,22) (276,9) 70 (31.75) (29,6) 95 (3,09) (30,) 100 (5,36) (266,7) (25,) 12.7 (322,6) 95 (3,1) (3,0) 110 (9,9) SSS 00 (5,5) 11.5 (292,1) 12.5 (317,5) 10.1 (256,5) 50 (22,7) 1000 (6,9) 10.5 (266,7) 65 (19,5) (276,9) 65 (19,5) 10 SSS 500 (3,) 12.0 (30,) (323,9) 12.7 (322,6) 5.0 (137,2) 76 (3,5) 00 (5,5) 13.5 (32,9) 90 (0,) 1000 (6,9) 1.0 (355,6) 122 (55,3) (370,) 160 (72,6) 12 SSS 500 (3,) 1 (37,7) 1 (37,7) 1. (375,9) 6.10 (15,9) 102 (6,3) 00 (5,5) 15.6 (396,2) 15 (65,) 1000 (6,9) 16.2 (11,5) 210 (95,3) (29,3) 20 (10,9)

9 ed Nipples* Male x Male * LIPHTIC MINE CURED EPOXY PRODUCTS ONLY ches Nominal 1 (.305) - Standard Lengths Ft. (m) 1.5 (.57) Weight (KGS) 2 (.610) (36,6) (52,) 1.7 (0,77) 2.5 (1,13) 3. (1,5) (9,3) (0,91) 3.1 (1,1).1 (1,6) (60,2) 3500 (2,1) (1,27).1 (1,6) 5.5 (2,9) 3 ½ 2.37 (60,2) (2,63).6 (3,90) 11.5 (5,22) 3 ½ 2.9 (7,7) 3000 (20,7) 3.6 (1,63) 5. (2,5) 7.2 (3,27) 3.33 (5,6) 3000 (20,7) (,26) ½ 2.9 (7,7) (6,67) 19.6 (,9) ½ 3.33 (,6) (5,9) 16.1 (7,30) ½ 3.5 (97,) 2500 (17,2) (3,9) 10.3 (.67) 5 ½ 3.5 (97,) (7,0) 20. (9,3) 5 ½.7 (120,) (3,76) 11.1 (5,03) (139,7) 2250 (15,5) (6,26) 1. (,35) (150,6) 1000 (6,9) (5,0) 1.9 (6,76) (139,7) 2500 (17,2) (9,39) 27.6 (12,52) (150,6) (6,53) 19.2 (,71) (150,6) (,0) (196,6) (,0) (196,6) (19,2) SSS 7.7 (196,6) (6,17) 27.0 (,23) 10 SSS 9. (29,9) (137,2) (9,27) 0.6 (12,37) 12 SSS 11.1 (300,0) (15,9) (53,) 9

10 ed Nipples* Male x Male * LIPHTIC MINE CURED EPOXY PRODUCTS ONLY ches Nominal 3 (.91) (1.219) - Standard Lengths Ft. (m) 6 (1.29) Weight (KGS) (2.3) 10 (3.0) Repair Nipples (36,6) (2,31) 6. (3,0) 10.1 (,5) 13.5 (6,12) 16.9 (7,67) 9.5 (22,5) (9,3) (2,77).2 (3,72) 12.2 (5,53) 16.3 (7,39) 20. (9,25) 60.5 (27,) (60,2) 3500 (2,1).3 (3,76) 11.0 (,99) 16.5 (7,) 22.0 (9,9) 27.5 (12,7) 1. (37,1) 3 ½ 2.37 (60,2) (7,5) 23.0 (10,3) 3.5 (15,65) 6.0 (20,7) 57.5 (26,0) 16.9 (76,6) 3 ½ 2.9 (7,7) 3000 (20,7) 10. (,90) 1. (6,53) 21.5 (9,75) 2.7 (13,02) 35.9 (16,2) (,2) 3.33 (5,6) 3000 (20,7) 1.1 (6,0) 1. (,53) 2.3 (12,) 37.7 (17,10) 7.1 (21,36) 10. (63,9) ½ 2.9 (7,7) (13,3) 39.2 (17,7) 5.7 (26,63) 7.3 (35,52) 97.9 (,1) 27.2 (130,3) ½ 3.33 (,6) (10,9) 32.2 (1,61). (21,95) 6.5 (29,26) 0.6 (36,56) 23.2 (10,0) ½ 3.5 (97,) 2500 (17,2) 15.5 (7,03) 20.6 (9,3) 31.0 (1,06) 1.3 (1,73) 51.6 (23,1) 15.5 (71,9) 5 ½ 3.5 (97,) (1,15) 1.6 (1,7) 62. (2,30) 3.2 (37,7) 10.0 (7,17) (13,) 5 ½.7 (120,) (7,53) 22.2 (10,07) 33.2 (15,06).3 (20,09) 55. (25,13) (73,9) (139,7) 2250 (15,5) 27.6 (12,52) 36. (16,69) 55.2 (25,0) 73.6 (33,3) 92.0 (1,73) (123,9) (150,6) 1000 (6,9) 22. (10,16) 29. (13,52).7 (20,2) 59.6 (27,03) 7.5 (33,79) 15.1 (,0) (139,7) 2500 (17,2) 1.5 (1,2) 55.3 (25,0) 2.9 (37,60) 96.7 (3,6) 13.2 (62,69) 33.9 (17,1) (150,6) (13,06) 3. (17,2) 57.6 (26,13) 76. (3,) 96.0 (3,5) 23.2 (12,5) (1,7) (13,20) 3. (17,60) 5.3 (26,) 77.7 (35,2) 97.1 (,0) (13,) (196,6) (13,20) 3. (17,60) 5.3 (26,) 77.7 (35,2) 97.1 (,0) (13,) (196,6) (2,9) 5.0 (3,56) 127. (57,79) (77,07) 212. (96,3) (26,2) SSS 7.7 (196,6) (1,3) 53.9 (2,) 0.9 (36,7) 107. (,9) 13. (61,1) (179,2) 10 SSS 9. (29,9) (27,7) 1.3 (36,9) (55,3) (73,9) (92,2) (276,5) 12 SSS 1.1 (300,0) (3,0) 99. (5,3) 19.7 (67,9) (90,5) 29.5 (113,2) 75.9 (33,3) 10

11 ed Nipples* Male x Male * NHYDRIDE EPOXY PRODUCTS ONLY ches Nominal 1 (.305) - Standard Lengths Ft. (m) 1.5 (.57) Weight (KGS) 2 (.610) (3,1) 3000 (20,7) 2.06 (52,) 1.3 (0,59) 1.9 (0,9) 2.6 (1,1) (50,) 3000 (20,7) 1.6 (0,73) 2. (1,10) 3.2 (1,6) (61,7) 3000 (20,7) (0,99) 3.3 (1,). (1,9) (76,2) 2900 (20,7) 2.9 (1,32). (1,9) 5. (2,6) (99,3) 2500 (17,2) 3.9 (1,77) 5. (2,66) 7. (3,5) (95,3) 3000 (19,3) 5.1 (2,31) 7.6 (3,7) 10.2 (,62) 5 1 /2.7 (120,) (3,76) 11.1 (5,03) (1,6) (3,95) 11.6 (5,26) (139,7) (,01) 11. (5,35) (196,6) 2000 (13,7) (10,6) ed Nipples* Male x Male * ROMTIC MINE PRODUCTS ONLY ches Nominal 1 (.305) - Standard Lengths Ft. (m) 1.5 (.57) Weight (KGS) 2 (.610) (3,1) 2500 (19,0) 2.06 (52,) 1.3 (0,6) 1.9 (0,6) 2.6 (1,2) (50,) 2250 (19,0) 1.6 (0,7) 2. (1,1) 3.2 (1,5) (61,7) 2000 (17,2) (1,0) 3.3 (1,5). (2,0) (76,2) 2000 (17,2) 2.9 (1,3). (2,0) 5. (2,6) (76,2) 1750 (15,5) 3.9 (1,) 5. (2,7) 7. (3,5) 1 / (95,2) 2250 (15,5) 3.9 (1,77) 5. (2,66) 7. (3,5) 5 1 /2.7 (120,) (3,76) 11.1 (5,03) (139,7) (,0) 11.6 (5,3) 6 5 / 5.50 (139,7) 1750 (12,1) ---. (,01) 11. (5,35) (196,6) (10,6) 11

12 ed Nipples* Male x Male *NHYDRIDE EPOXY PRODUCTS ONLY ches Nominal 3 (.91) (1.219) - Standard Lengths Ft. (m) 6 (1.29) Weight (KGS) (2.3) 10 (3.0) Repair Nipples (3,1) 3000 (20,7) 3.9 (1,7) 5.2 (2,36) 7. (3,56) 10. (,72) 13.0 (5,9) 1.7 (1,9) (50,) 3000 (20,7). (2,19) 6. (2,92) 9.6 (,3) 12. (5,) 16.0 (7,3) 52. (23,9) (61,7) 3000 (20,7) 6.6 (2,96). (3,96) 13.2 (5,92) 17.6 (7,92) 22.0 (9,9) 3. (3,0) (76,2) 2900 (20,7).7 (3,96) 11.6 (5,2) 17. (7,92) 23.2 (10,6) 29.0 (13,2) 109. (9,6) (99,3) 2500 (17,2) 11.7 (5,31) 15.6 (7,0) 23. (10,6) 31.2 (1,2) 39.0 (17,7) 15. (71,) (95,3) 3000 (19,3) 15.3 (6,9) 20. (9,2) (1,5) 51.0 (23,1) (7,5) 5 1 /2.7 (120,) (7,53) 22.2 (10,07) 33.2 (15,06).3 (20,09) 55. (25,13) 19. (9,9) (1,6) (,03) 23.2 (10,5) 3. (15,) 6. (21,0) 5.0 (26,3) 252. (11,7) (139,7) (,03) 23.6 (10,7) 35.3 (16,0) 7.1 (21,) 5.9 (26,7) (13,1) (196,6) 2000 (13,7) 35.2 (15,9) 6. (21,2) 70. (31,9) 93.6 (2,5) (79,7) 50.6 (20,) ed Nipples* Male x Male *ROMTIC MINE PRODUCTS ONLY ches Nominal 3 (.91) (1.219) - Standard Lengths Ft. (m) 6 (1.29) Weight (KGS) (2.3) 10 (3.0) Repair Nipples (3,1) 2500 (19,0) 3.9 (1,) 5.2 (2,) 7. (3,6) 10. (,7) 13.0 (5,9). (20,1) (50,) 2250 (19,0). (2,2) 6. (2,9) 9.6 (,) 12. (5,) 16.0 (7,3) 61.1 (27,7) (61,7) 2000 (17,2) 6.6 (3,0). (,0) 13.2 (5,9) 17.6 (7.9) 22.0 (9,9) 5. (3,9) (76,2) 2000 (17,2).7 (,0) 11.6 (5,3) 17. (7,9) 23.2 (10,6) 29.0 (13,2) (51,) (76,2) 1750 (15,5) 11.7 (5,3) 15.6 (7,1) 23. (10,6) 31.2 (1,2) 39.0 (17,7) (7,5) (95,2) 2250 (15,5) 15.3 (6,9) 20. (9,2) (1,5) 51.0 (23,1) 17.0 (7,9) 5 1 /2.7 (120,) (7,53) 22.2 (10,07) 33.2 (15,06).3 (20,09) 55. (25,13) (96,6) (139,7) (7,9) 23.2 (10,5) 3. (15,) 6. (21,0) 5.0 (26,3) (10,) (139,7) 1750 (12,1) 17.7 (,03) 23.6 (10,7) 35.3 (16,0) 7.1 (21,) 5.9 (26,7) (12,2) (196,6) (15,9) 6. (21,2) 70. (31,9) 93.6 (2,5) (79,76) 03. (13,1) 12

13 Flanges (2) Female 100 F 200 F Flange O.D. Flange Width C olt Circle No. of olts olt (1) Length olt Hole (kg) NSI (1,9) 260 (1,) 6.0 (152,) 3.06 (77,7) 2.53 (6,3).625 x 10 (15,9 x 25,0).750 (19,1).6 (2,09) (1,9) 260 (1,) 7.0 (177,) 3.3 (5,9) 5.50 (139,7) x 12 (15,9 x 30,).750 (19,1) 7 (3,1) 3 ½ 25 (1,9) 260 (1,) 7.5 (190,5) 3.63 (92,2) 6.00 (152,).625 x 10 (15,9 x 25,0).750 (19,1).1 (3,67) ½ 25 (1,9) 260 (1,) 9.0 (22,6).00 (101,6) 7.50 (190,5).625 x 1 (15,9 x 355,6).750 (19,1) 12.0 (5,) (1,9) 260 (1,) 11.0 (279,) (21,3).75 x 1 (19,1 x 355,6).75 (22,2) 17.5 (7,9) 7 25 (1,9) 260 (1,) 11.0 (279,) 5.00 (127,0) 9.50 (21,3).75 x 1 (19,1 x 355,6).75 (22,2) 1. (,35) 5 25 (1,9) 260 (1,) 13.5 (32,9) 5.00 (127,0) (29,5).75 x 1 (19,1 x 355,6).75 (22,2) 2.5 (12,93) (1,9) 260 (1,) 13.5 (32,9) 5.25 (133,) (29,5).75 x 1 (19,1 x 355,6).75 (22,2) 2. (11,25) SSS 25 (1,9) 260 (1,) 13.5 (32,9) 5.00 (127,0) (29,5).75 x 1 (19,1 x 355,6).75 (22,2) 2.2 (12,79) 10 SSS 25 (1,9) 260 (1,) 16.0 (06,) 5.75 (16,1) 1.25 (362,0) 5.0 (137,2) x 15 (22,2 x 31,0) 1.00 (25,) 37.2 (16,7) 12 SSS 25 (1,9) 260 (1,) 19.0 (2,6) 6.3 (163,3) 17.0 (31,) 6.10 (15,9) x 16 (22,2 x 31,0) 1.00 (25,) 61.1 (27,71) NSI 300 ½ 70 (5,1) 675 (,7) 10.0 (25,0).00 (101,6) 7.75 (200,0).75 x 1 (19,1 x 355,6).75 (22,2) 15. (7,17) 5 ½ 70 (5,1) 675 (,7) 11.0 (279,). (12,0) 9.25 (235,0).3.75 x 1 (19,1 x 355,6).75 (22,2) 22.6 (10,25) (5,1) 675 (,7) 12.5 (317,5) (269,9) x 1 (19,1 x 355,6).75 (22,2) 25.2 (11,3) 7 70 (5,1) 675 (,7) 12.5 (317,5) 5.00 (127,0) (269,9) x 1 (19,1 x 355,6).75 (22,2) 27.2 (12,3) 5 70 (5,1) 675 (,7) 15.0 (31,0) 5.00 (1127,0) x 1 (22,2 x 355,6) 1.00 (25,) 3.7 (17,55) (5,1) 675 (,7) 15.0 (31,0) 5.25 (133,) x 1 (22,2 x 355,6) 1.00 (25,) 35. (16,06) SSS 70 (5,1) 675 (,7) 15.0 (31,0) 5.00 (127,0) x 1 (22,2 x 355,6) 1.00 (25,) 3.3 (17,375) 10 SSS 70 (5,1) 675 (,7) 17.5 (,5) 5.75 (16,1) (37,) 5.0 (137,2) 16 1 x 15 (25, x 31,0) (2,6) 50. (22,6) 12 SSS 70 (5,1) 675 (,7) 20.5 (520,7) 6.3 (163,3) (50,9) 6.10 (15,9) x 16 (2,6 x 06,) 1.25 (31,) 77. (35,10) (1) olt lengths in table are for fiberglass-to-fiberglass flange connections. Fiberglass-to-steel bolt lengths are provided in INS000. (2) Spiral wound gaskets (Flexitalic ) are required in all flange joints 13

14 Flanges (2) Female (continued) 100 F 200 F Flange O.D. Flange Width C olt Circle No. of olts olt (1) Length olt Hole (kg) NSI 300/600 (3) ½ 10 (10,2) 10 (10,2) 10 (10,2) 10 (10,2) 1350 (9,3) 1350 (9,3) 1350 (9,3) 1350 (9,3) (155,6) 6.5 (165,1) 7.5 (190,5).25 (209,6) (66,0) 3.06 (77,7) 3.3 (5,9) 3.63 (92,2) 5.00 (127,0) 5.75 (19,2) (16,3) 2.06 (52,) x 10 (19,1 x 25,0).625 x 10 (15,9 x 25,0).75 x 12 (19,1 x 30,).75 x 10 (19,1 x 25,0).75 (22,2).750 (19,1).75 (22,2).75 (22,2).3 (1,95) 5.3 (2,0) 7.6 (3,5) 9.7 (,0) NSI 600 (3) ½ 10 (10,2) 5 ½ 10 (10,2) (10,2) 7 10 (10,2) 5 10 (10,2) (10,2) SSS 10 (10,2) 10 SSS 10 (10,2) 12 SSS 10 (10,2) 1350 (9,3) 1350 (9,3) 1350 (9,3) 1350 (9,3) 1350 (9,3) 1350 (9,3) 1350 (9,3) 1350 (9,3) 1350 (9,3) (273,1) (355,6) 1.0 (355,6) 16.5 (19,1) 16.5 (19,1) 16.5 (19,1) 20 (50,0) 22 (55,).00 (101,6). (12,0) (127,0) 5.00 (127,0) 5.25 (133,) 5.00 (127,0) 5.75 (16,1) 6.3 (163,3).50 (215,9) (266,7) (292,1) (292,1) (39,3) (39,3) (39,3) 17 (31,) (9,0) (137,2) 6.10 (15,9).75 x 1 (22,2 x 355,6) 1 x 1 (25, x 355,6) 12 1 x 1 (25, x 355,6) 12 1 x 1 (25, x 355,6) x 1 (2,6 x 355,6) x 1 (3,9 x 355,6) x 2 (2,575 x 609,6) x 2 (31,75 x 609,6) x 2 (31,75 x 609,6) 1.00 (25,) (2,6) (2,6) (2,6) 1.25 (31,) 1.25 (31,) 1.25 (31,) (3,9) (3,9) 1. (,53) 3.9 (15,3) 33.3 (15,10) 36.5 (16,56) 9. (22,59) 7.1 (21,36) 9. (22,1) 76.9 (3,) 95. (3,27) NSI 900 (3) 3 ½ 2220 (15,3) ½ 2220 (15,3) 5 ½ () 2220 (15,3) 6 5 () 2220 (15,3) 2025 (1,0) 2025 (1,0) 2025 (1,0) 2025 (1,0) 9.5 (21,3) 11.5 (292,1) (39,3) 15.0 (31,0) 3.63 (92,2).00 (101,6). (12,0) (190,5) 9.25 (235,0) (279,) (317,5) x 10 (22,2 x 25,0) x 1 (2,6 x 355,6) 1.25 x 1 (31, x 355,6) x 1 (2,6 x 355,6) 1.00 (25,) 1.25 (31,) (3,9) 1.25 (31,) 13.7 (6,21) 21.5 (7,75) 3.9 (17,6) 39. (17,7) 7 () 2220 (15,3) 2025 (1,0) 15.0 (31,0) 5.00 (127,0) (317,5) x 1 (2,6 x 355,6) 1.25 (31,) 3.5 (19,73) 9 5 () 2220 (15,3) 2025 (1,0) 1.5 (69,9) 5.25 (133,) (393,7) x 1 (3,9 x 355,6) 1.50 (3,1) 6.9 (29,) (1) olt lengths in table are for fiberglass-to-fiberglass flange connections. Fiberglassto-steel bolt lengths are provided in INS000. (2) Spiral wound gaskets (Flexitalic ) are required in all flange joints () Steel backing plates are required. (3) Spacer rings are required for make-up of NSI when mated to steel raised face flanges. 1

15 Flanges (2) Female (continued) 100 F 200 F Flange O.D. Flange Width C olt Circle No. of olts olt (1) Length olt Hole (kg) NSI 900/1500 (3) (25,6) 3375 (23,3) 7.00 (177,) (65,0).75 (123,) 2.05 (52,1) 1 x 10 (25, x 25,0) (2,6) 5.6 (2,5) (25,6) 3375 (23,3).50 (215,9) 3.06 (77,7) 6.50 (165,1).75 x 10 (22,2 x 25,0) 1.00 (25,) 9.7 (,0) (25,6) 3375 (23,3) (2,5) 3.3 (5,9) 7.50 (190,5) 2. 1 x 12 (25, x 30,) (2,6) 13.6 (6,17) NSI 1500 (3) 3 ½ 3705 (25,6) 3375 (23,3) 10.5 (266,7) 3.63 (92,2).00 (203,2) x 12 (25, x 30,) 1.25 (31,) 16. (7,62) ½ 3705 (25,6) 3375 (23,3) 10.5 (266,7).00 (101,6).00 (203,2) x 12 (25, x 30,) 1.25 (31,) 1. (,53) ½ () 3705 (25,6) 3375 (23,3) (311,2).00 (101,6) 9.50 (21,3) 1.25 x 1 (31, x 355,6) (3,9) 2.9 (11,29) 5 ½ () 3705 (25,6) 3375 (23,3) (311,2). (12,0) 9.50 (21,3) x 1 (31, x 355,6) (3,9) 2.5 (12,93) 5 ½ () 3705 (25,6) 3375 (23,3) 1 (37,7). (12,0) (292,1) x 1 (3,1 x 355,6) (1,3).9 (20,37) 6 5 () 3705 (25,6) 3375 (23,3) 15.5 (393,7) (317,5) x 1 (3,9 x 355,6) 1.50 (3,1) 1.1 (1,6) 7 () 3705 (25,6) 3375 (23,3) 15.5 (393,7) 5.00 (127,0) 12.5 (317,5) x 1 (3,9 x 355,6) 1.50 (3,1) 5. (20,59) 9 5 () 3705 (25,6) 3375 (23,3) 19.0 (2,6) 5.25 (133,) 15.5 (393,7) x 1 (1,3 x 355,6) 1.75 (,5) 72.0 (32,66) olt Torquing Sequence olt Torque vs. olt olt (inch) Torque Grade 2 Grade 5 ft/lb N/m ft/lb N/m (1) olt lengths in table are for fiberglass-to-fiberglass flange connections. Fiberglass-to-steel bolt lengths are provided in INS000. (2) Spiral wound gaskets (Flexitalic ) are required in all flange joints Multiply by 0.9 for plating NOTE: Regardless of bolting material, do not exceed Grade 5 torque. (3) Spacer rings are required for make-up of NSI when mated to steel raised face flanges. () Steel backing plates are required. 15

16 Changeover Couplings Female x NPT Female ches X 2 (kg) 1.90 x 1.50 NPT (127,0) 3.0 (76,2) 2.06 (52,) 1.02 (25,9) 1.5 (0,6) 2 3 x 2 NPT (117,5) 3.7 (9,0) 1.05 (26,7) 2.5 (1,13) 2 7 x 2 ½ NPT (139,7). (111,6) (39,9).5 (2,0) 3 ½ x 3 NPT (152,) 5.3 (13,6) 1.63 (1,) 6 (2,72) ½ x NPT (17,) 6. (172,7) 1.73 (3,9) 1 (6,35) ½ x 2 NPT (121,9) 1.06 (26,9) 1.0 (20,) 5 ½ x 5 NPT (196,9 7.2 (12,9) (9,3) 16 (7,26) 6 5 x 6 NPT 1000 (6,9).0 (203,2).3 (210,) 1.95 (9,5) 20 (9,07) 7 x 6 NPT 1000 (6,9).0 (203,2).9 (226,1) 1.95 (9,5) 25 (11,3) 5 x NPT 1000 (6,9).5 (215,9) 10. (27,3) 2.15 (5,6) 30 (13,61) 9 5 x NPT 1000 (6,9).5 (215,9) 11. (29,6) 2.15 (5,6) 2 (19,05) 16

17 Changeover Nipples and Swages Male x NPT Male ches X 2 (kg) 1.90 x 1.50 NPT (22,6) 2.15 (5,6) 2.06 (52,) 1.02 (25,9) 1.1 (0,50) 2 3 x 2 NPT (25,0) 2.60 (66,0) 1.05 (26,7) 1.7 (0,77) 2 7 x 2 NPT (279,) 3.10 (7,7) (26,9) 3.5 (5,21) 2 7 x 2 ½ NPT (279,) 3.10 (7,7) (39,9) 2.5 (1,13) 3 NPT x (279,) 3.75 (95,3) 1.63 (1,) 5.5 (,1) 3 NPT x (279,) 3.75 (95,3) 1.63 (1,) (10,) 3 ½ x 2 NPT (279,) 3.75 (95,3) 1.06 (26,9) 5.5 (,1) 3 ½ x 2 ½ NPT (279,) 3.75 (95,3) 1.57 (39,9) 7.0 (10,) 3 ½ x 3 NPT (279,) 3.75 (95,3) 1.63 (1,) 3.2 (1,5) NPT x (121,9) 1.73 (3,9) 12.0 (17,9) NPT x 3 ½ (119,6) 1.73 (3,9) 10.6 (15,) ½ x NPT (30,).0 (121,9) 1.9 (9,3) 5.2 (2,36) ½ x 2 NPT (121,9) 1.06 (26,9) 1.0 (20,) ½ x 2 ½ NPT (121,9) 1.57 (39,9) 12.0 (17,9) ½ x 3 NPT (119,6) 1.63 (1,) 10.6 (15,) 5 ½ x 5 NPT (11,0) (3,9) 6.0 (2,72) 6 5 x 6 NPT 1000 (6,9) (16,9) 1.95 (9,5).1 (3,67) 7 x 6 NPT 1000 (6,9) (179,1) 1.95 (9,5) 9. (,5) 5 x NPT 1000 (6,9) (22,) 2.15 (5,6) 11.1 (5,03) 9 5 x NPT 1000 (6,9) (25,1) 2.15 (5,6) 20.2 (9,16) 17

18 Reducing Tee Female ches C X 2 (kg) 2 3 x (133,) 5.75 (16,1) 3. (6,) 2.06 (52,) 11 (,99) 2500 (17,2).0 (101,6) 12 (5,) 3 ½ x (165,1) 7.00 (177,). (121,9) 1 (6,35) (139,7) 21 (9,53) 2500 (17,2) 5.95 (151,1) 26 (11,79) 3000 (20,7) 6. (162,6) 50 (22,6) (15,) 65 (29,) ½ x (190,5) 7.50 (190,5) 6.2 (157,5) 25 (11,3) (177,) 39 (17,69) 2500 (17,2) 7.6 (193,0) (21,77) 3000 (20,7).1 (205,7) 75 (3,02) (22,6) 5 (3,56) ½ x 3 ½ (190,5).50 (215,9) 6.2 (157,5) 25 (11,3) (177,) 39 (17,69) 2500 (17,2) 7.6 (193,0) (21,77) 3000 (20,7).1 (205,7) 75 (3,02) (22,6) 5 (3,56) 6 5 x 3 ½ (215,9) 9.75 (27,7).5 (215,9) 60 (27,22) (21,3) 0 (36,29) 6 5 x ½ (215,9) 9.75 (27,7).5 (215,9) 60 (27,22) 2000 (13,2) 9.5 (21,3) 0 (36,29) 2250 (15,5) 10 (25,0) 100 (1,) 7 x 3 ½ 2000 (13,2) (2,5) 9.50 (21,3) 10.1 (256,5) 75 (3,02) 7 x ½ 2000 (13,2) (25,0) 10.1 (256,5) 75 (3,02) 5 x 3 ½ (25,0) (29,5) 11.0 (279,) 70 (31,75) 5 x ½ (279,) 70 (31,75) 5 x (279,) 55 (2,95) 10 SSS x (5,5) (30,) (30,) 13.5 (32,9) 5.0 (137,2) 5 (3,56) 1000 (6,9) 1.0 (355,6) 103 (6,723) (370,) 120 (5,) 1

19 Reducing Tee Female (continued) ches C X 2 (kg) 10 SSS x 5 00 (5,5) (30,) (30,) 13.5 (32,9) 5. (137,2) 90 (0,2) 1000 (6,9) 1.0 (355,6) 125 (56,70) (370,) 160 (72,5) 10 SSS x SSS 00 (5,5) (30,) 1 (32,9) 13.5 (32,9) 5.0 (137,2) 9 (,5) 1000 (6,9) 1.0 (355,6) 125 (56,70) (370,) 160 (72,5) 12 SSS x (37,7) 1 (37,7) 17.1 (3,3) 6.10 (15,9) 230 (10,33) 12 SSS x SSS (102,06) 12 SSS x 10 SSS (137,2) 25 (111,13) Reducing ushing Male x Female ches C X 2 (kg) 2 7 x (17,2) 10.0 (25,0) 3.1 (7,7) 1. (36,6) (52,) 2.5 (1.13) 3 ½ x (2,1) 10.0 (25,0) 3.75 (95,3) 1. (36,6) 2.06 (52,) 6 (2.72) 3 ½ x (17,2) 10. (276,) 1.9 (9,3) (1.1) ½ x (2,1) 10.0 (25,0).0 (121,9) 1. (36,6) 2.06 (52,) 11 (.99) ½ x (276,) 1.9 (9,3) 10 (,5) ½ x (20,7) 2.36 (59,9) 2..5 (3,6) ½ x 3 ½ (276,).0 (121,9) 2.95 (7,9) 6.0 (2,72) 5½ x (276,) 5.55 (11,0) 1.9 (9,3).3 16 (7,26) 5 ½ x (59,9) 2. 1 (6,35) 5 ½ x 3 ½ (22,7) 2.95 (7,9) 11.5 (5,22) 6 5 x (276,) 6.65 (16,9) 1.95 (9,5) 27 (12,25) 6 5 x (59,9) (11,3) 6 5 x 3 ½ (22,7) 2.9 (7,7) 22 (9,9) 6 5 x ½ (100,3) 16 (7,26) 7 x 3 ½ 2500 (17,2) (22,7) 7.10 (10,3) 2.95 (7,9) 2 (10,9) 7 x ½ 2500 (17,2) 3.95 (100,3) 21 (9,53) 5 x ½ (100,3) (19,96) 19

20 Reducing ushing Male x Female (continued) ches C X 2 (kg) 5 x (30,) 5.95 (151,1) 30 (13,61) 9 5 x (13.) 11.9 (30,3) 9.65 (25,1) 3 (17,2) 10 SSS x (30,) (25,) 5.95 (151,1) 5.0 (137,2) 65 (29,) 10 SSS x (196,6) 50 (22,6) 10 SSS x SS (196,6) 50 (22,6) 12 SSS x (30,) 1. (365,) 7.7 (196,6) 6.10 (15,9) 0 (36,2) 12 SSS x SSS (196,6) 0 (36,2) 12 SSS x 10 SSS (300,0) 5.0 (137,2) 70 (31,77) Reducing Coupling Female x Female ches X 2 (kg) 2 3 x x x x ½ x ½ x ½ x ½ x ½ x ½ x ½ x 3 ½ ½ x ½ x ½ x 3 ½ (16,3) 6. (172,7).2 (106,7) 7.2 (12,9).0 (203,2) (257,2) (263,5) (257,2) (263,5).25 (10,0) 5.25 (133,) 6.0 (152,) 7.5 (19,2).7 (221,0).5 (215,9) (52,) 2.06 (52,) 2.06 (52,) (52,) (1,1) 7 (3,1) 6.0 (,93).5 (3,6) 1 (,16) 13 (5,90) 12 (5,) 2 (12,70) 2 (10,9) 26 (11,79) 20 (9,07) 3 (17,2) 30 (13,61) 3 (15,2) 5 ½ x ½ (13,61) 6 5 x 3 ½ (31,0).5 (215,9) 37 (16,7) 6 5 x ½ (15,2) 20

21 Reducing Coupling Female x Female (continued) ches X 2 (kg) 7 x ½ 2500 (17,2) 15.0 (31,0) 9.5 (21,3) (19,96) 7 x 5 ½ 2500 (17,2).3 0 (1,1) 5 x ½ (31,0) 10.3 (261,6) 55 (2,95) 5 x (20,1) 5 x (31,0) 39 (17,69) 9 5 x ½ (31,0) 12.2 (309,9) (39,92) 9 5 x (3,7) 9 5 x (26,31) SS x ½ (19,1) 10.0 (25,0) 6.10 (15,9) 57 (,) SS x (36,3) 7 (69,) 10 SSS x (95,3) 13. (350,5) 5.0 (137,2) 6 (30,) 10 SSS x (2,5) 10 SSS x SS (31,0) 50 (22,6) 12 SSS x (6,) 16.0 (06,) 6.10 (15,9) 90 (0,2) 12 SSS x (520,7) 90 (0,2) 12 SSS x SSS (95,3) 90 (0,2) 12 SSS x 10 SSS (06,) 5.0 (137,2) 75 (3,02) Swage Nipples Male x Male ches C X 2 (kg) 2 3 x (17,2) 12.0 (30,) 2.60 (66,0) 1.50 (3,1) 2.06 (52,) 3.0 (1,36) 2 7 x (2,1) 12.0 (30,) 3.10 (7,7) 1.50 (3,1) (52,).5 (2,0) 2 7 x (17,2) 2.00 (50,) 3.5 (1,59) 2 7 x (2,1) 3.5 (1,59) 3 ½ x (2,1) 12.0 (30,) 3.75 (95,3) 1.50 (3,1) 2.06 (52,).0 (3,63) 3 ½ x (2,1) 2.00 (50,) 5.5 (2,9) 3 ½ x (20,7) 2.3 (61,7) 2..5 (2,0) 21

22 Swage Nipples Male x Male (continued) ches C X 2 (kg) ½ x (2,1) ½ x (2,1) ½ x 3 ½ 3000 (20,7) 5 ½ x 3 ½ 3000 (20,7) 5 ½ x ½ (355,6) 16 (06,). (121,9).71 (119,6) 5.55 (10,) 2.00 (50,) 2.3 (61,7) 3.00 (76,2) 3.00 (76,2) 3.90 (99,1) (6,35) 12.0 (5,) 10.0 (,5) 1.0 (,16) 12.0 (5,) 6 5 x 3 ½ x ½ x 5 ½ x ½ x 5 ½ x (6,9) 7 x x 5 ½ x (6,9) 5 x x x (6,9) 9 5 x x x SSS x (,2) 10 SSS x (,2) 10 SSS x SSS 1200 (,2) 12 SSS x (,2) 12 SSS x SSS 1200 (,2) 12 SSS x 10 SSS 1200 (,2) 16 (06,) 16.0 (06,) 17.0 (31,) 16.0 (06,) 17.0 (31,) 1.0 (57,2) 17.0 (31,) 1.0 (57,2) 6.65 (16,9) 7.05 (179,1).65 (219,7) 9.65 (25,1) 9. (239,) (25,) (336,6) 3.00 (76,2) 3.90 (99,1).7 (120,) 3.90 (99,1).7 (120,) 5.5 (1,6) 5.5 (1,6).7 (120,) 5.5 (1,6) 5.50 (139,7) 5.5 (1,6) 5.5 (1,6) 5.50 (139,7) 5.5 (1,6) 7.50 (190,5) 5.93 (150,6) 7.7 (196,6) 7.7 (196,6) 7.7 (196,6) 9. (29,9) 5.0 (137,2) 6.10 (15,9) (137,2) 2 (12,70) 26 (11,79) 20 (9,07) 2 (12,70) 21 (9,53) 15 (6,0) 1.5 (,39) 5 (20,1) 0 (1,1) (19,96) 0 (1,1) 35 (15,) 1 (1,60) 50 (22,6) 31 (1,06) 0 (36,29) 55 (2,95) 55 (2,95) 100 (5,36) 100 (5,36) 65 (29,) 22

23 ed Couplings Female x Female ches (kg) (130,2) 2.0 (71,1) 2.06 (52,) 1.1 (0,50) 2500 (17,2) 2.90 (73,7) 1.2 (0,5) 3000 (20,7) 3.00 (76,2) 1. (0,6) 3500 (2,1) 3.15 (0,0) 1.6 (0,7) (3,) 1.9 (0,7) (155,6) 3.25 (2,6) 1. (0,6) (6,) 1. (0,0) 2500 (17,2) 3.60 (91,) 2.2 (1,02) 3000 (20,7) 3.70 (9,0) 2.5 (1,13) 3500 (2,1) 3.90 (99,1) 3.0 (1,37) (10,1) 3.6 (1,61) (171,5) 3.0 (96,5) (0,91) (101,6) 2.6 (1,17) 2500 (17,2).20 (106,7) 3.2 (1,5) 3000 (20,7).0 (111,) 3.9 (1,75) 3500 (2,1).60 (116,).5 (2,05) (121,9) 5.2 (2,37) 3 ½ (1,2).60 (116,) 3.1 (1,1) (121,9) 3.9 (1,76) 2500 (17,2) 5.10 (129,5) 5.1 (2,30) 3000 (20,7) 5.25 (133,) 5.7 (2,5) 3500 (2,1) 5.50 (139,7) 6. (3,0) (16,1) 7.9 (3,59) (222,3) 5.00 (127,0) 3.5 (1,59) (133,). (2,16) 2500 (17,2) 5.55 (11,0) 6.3 (2,) 3000 (20,7) 5.0 (17,3) 7.7 (3,50) ½ (203,2) 5.0 (17,3) 5.3 (2,39) (15,9) 6.9 (3,11) 2500 (17,2) 6.0 (162,6).5 (3,6) 3000 (20,7) 6.70 (170,2) 10.3 (,66) 3500 (2,1) 7.00 (177,) 12.1 (5,9) (12,9) 13. (6,07) 23

24 ed Couplings Female x Female (continued) ches (kg) 5 ½ 1000 (6,9) (27,7) 6.25 (15,) (2,51) (163,) 6.9 (3,1) (167,6).0 (3,62) 1750 (12,1) 6.75 (171,5) 9.1 (,13) (177,) 10.9 (,96) 2500 (17,2) 7.30 (15,) 13.3 (6,02) 3000 (20,7) 7.60 (193,0) 15.7 (7,13) 3500 (2,1) 7.90 (200,7) 1.2 (,27) (20,3) 20.9 (9,6) (5,5).75 (222,3) 7.35 (16,7) 5.6 (2,55) 1000 (6,9) 7.55 (191,) 7.1 (3,21) (195,6).2 (3,71) (200,7) 9.7 (,0) (209,6) 12.5 (5,66) 2500 (17,2).70 (221,0) 16.2 (7,3) 7 00 (5,5) (25,0) 7.5 (199,) 7.7 (3,) 1000 (6,9).00 (203,2) 9.0 (,09) (20,3) 10. (,91) (213,) 12.7 (5,75) (222,3) 16.0 (7,26) 2500 (17,2) 9.20 (233,7) 20.5 (9,31) 5 00 (5,5) (25,0) 9.50 (21,3) 9.9 (,7) 1000 (6,9) 9.70 (26,) 12.0 (5,) (25,0) 15.3 (6,93) (259,1) 17.5 (7,96) (5,5) (266,7) (271,) 13.5 (6,12) 1000 (6,9) (276,9) 16.7 (7,57) (21,9) 19.3 (,7) (292,1) 2.6 (11,1) (302,3) 30.0 (13,63) SSS 00 (5,5) 10 (25,0) 9.60 (23,) 9.0 (,0) (259,1) 15.0 (6,0) 10 SSS 00 (5,5) (2,9) 12. (325,1) 5.0 (137,2) 1.0 (,16) (35,) 30.0 (13,61) 12 SSS 00 (5,5) 12.2 (309,9) 1. (375,9) 6.10 (15,9) 26.0 (11,79) (39,) 2.0 (19,05) 2

25 ed dapter onded ell x Male Pipe X 2 nhydride liphatic romatic ches (mm (kg) STD 15HR STD 15HR 15HR N/ R N/ N/ N/ (10,0) (5,6) (101,6) (59,9) (0,27) 1500 R R R R R 1750 (12,1) R R R R Q 2000 R Q R R Q 2250 (15,5) R Q R Q S 2500 (17,2) Q S R P N/ (5,2) N/ S N/ R N/ (127,0) (6,) (0,1) 00 (5,5) N/ N/ R N/ N/ 1000 (6,9) N/ S R R S 1250 S S R R S 1500 S S R R S 1750 (12,1) S S R S Q 2000 S Q R Q P 2250 (15,5) Q P R P N/ 2500 (17,2) Q P S N/ Q (5,2) N/ T N/ U T (133,) (1,5) (127,0) (0,5) 00 (5,5) N/ N/ U N/ N/ 1000 (6,9) T T U U T 1250 T T U U T 1500 T T U T Q 1750 (12,1) T S U S Q 2000 S Q U Q N/ 2250 (15,5) Q Q T Q N/ 2500 (17,2) Q N/ R Q Q (3,5) N/ T U U T (139,7) (9,) (133,) (0,73) 750 (5,2) N/ T N/ U T 00 (5,5) T N/ U N/ N/ 1000 (6,9) T T U U T 1250 T T U U S 1500 T S U S S 1750 (12,1) T S U S Q 2000 S R S R P 2250 (15,5) S Q S R S 2500 (17,2) R P R Q S (3,5) 5.75 (16,1).9 (12,2) 5.50 (139,7) 2. (1,09) T T U U T 750 (5,2) N/ T N/ U T 00 (5,5) T N/ U N/ N/ 1000 (6,9) T T U U S 1250 T S U T R 1500 S R T R Q 1750 (12,1) S R S Q P 2000 R P R P Q 25

26 ed dapter onded ell x Male (continued) *IMPORTNT NOTICE It is important to know the ID before ordering 6 5 ed dapters. Pipe X 2 nhydride liphatic romatic ches TC (3,5) 6.75 (171,5) 5.55 (11,0) 6.50 (165,1).3 (kg) STD 15HR STD 15HR 15HR 3.2 (1,5) R R R N/ N/ 750 (5,2) N/ R N/ N/ R 00 (5,5) R N/ R N/ N/ 1000 (6,9) R R R N/ Q 1250 R Q R N/ P 1500 Q P T N/ N/ (3,5) 6.25 (15,) 6.77 (172,0) 6.00 (152,) 3.5 (2,0) V V S S V 750* (5,2) N/ V N/ U (5.50 ID) 00* (5,5) V N/ U (5.50 ID) N/ S (5.93 ID) 1000* (6,9) V S U (5.50 ID) R (5.93 ID) S (5.93 ID) N/ T (5.50 ID) R (5.93 ID) 1250 S Q T N/ V (3,5) 6. (17,).77 (222,) 6.63 (16,) 5.3 (2,0) S N/ U U S S U 750 (5,2) N/ U N/ R T 00 (5,5) U N/ S N/ N/ 1000 (6,9) T S R N/ R SSS 500 (3,5).00 (203,2).79 (223,3).00 (203,2) 7.5 (3,2) N/ N/ R N/ N/ 00 (5,5) N/ N/ R N/ N/ 10 SSS 500 (3,5) 10.0 (25,0) 12 SSS 500 (3,5) 10.0 (25,0) (26,3) (337,1) 7.00 (177,) 7.00 (177,) 5.0 (137,2) 6.10 (15,9).7 (3,93) 21.5 (9,7) N/ N/ R N/ N/ N/ N/ R N/ N/ Q Sleeve Coupling onded ell x onded ell ches Pipe nhydride liphatic romatic (57,2) 2.20 (55,9) 3.00 (76,2) (kg) STD 15HR STD 15HR 15HR 2.6 (1,2) N/ R N/ N/ N/ 1500 R R R R R 1750 (12,1) R R R R Q 2000 R Q R R Q (5,2) 1.0 (57,2) 3.00 (76,2) 3.75 (95,3) 5.0 (2,3) N/ S N/ R N/ 00 (5,5) N/ N/ R N/ N/ 1000 (6,9) N/ S R R S 1250 S S R R S 1500 S S R R S 1750 (12,1) S S R S Q 2000 S Q R Q P 26

27 Sleeve Coupling onded ell x onded ell (continued) Pipe nhydride liphatic romatic ches (5,2) 1.0 (57,2) 3.65 (92,7).00 (101,6) (kg) STD 15HR STD 15HR 15HR 7. N/ T N/ U T (3,) 00 (5,5) N/ N/ U N/ N/ 1000 (6,9) T T U U T 1250 T T U U T 1500 T T U T Q 1750 (12,1) T S U S Q 2000 S Q U Q N/ (3,5) 1.0 (57,2) (5,1) N/ T U U T 750 (5,2) N/ T N/ U T 00 (5,5) T N/ U N/ N/ 1000 (6,9) T T U U T 1250 T T U U S 1500 T S U S S (3,5) 1.0 (57,2) 5.75 (16,1) 17. (,1) T T U U T 750 (5,2) N/ T N/ U T 00 (5,5) T N/ U N/ N/ 1000 (6,9) T T U T S 1250 T S U S R TC (3,5) 1.0 (57,1) 7.50 (190,5) 5.50 (139,7) 33. (15,3) R R R N/ N/ 750 (5,2) N/ R N/ N/ R 00 (5,5) R N/ R N/ N/ 1000 (6,9) R R R N/ Q 1250 R Q R N/ P *IMPORTNT NOTICE It is important to know the ID before ordering 6 5 Sleeve Couplings (3,5) 1.0 (57,2) 7.65 (19,3) 5.00 (127,0) 2.3 (11,0) V V S S V 750* (5,2) N/ V N/ (5.50 ID) 750* (5,2) N/ (5.93 ID) 00* (5.5) V N/ U (5.50 ID) 00* (5,5) S (5.93 ID) 1000* V S U (5.50 ID) 1000* S (5.93 ID) U (5.50 ID) S (5.93 ID) N/ (5.93 ID) N/ (5.93 ID) U (5.50 ID) R (5.93 ID) 1250 S Q V (57,2) 10.0 (25,0) 5.3 (136,7) 3.7 (19,) S N/ U U S S U Q 750 N/ U N/ S T 00 U N/ S N/ N/ 27

28 Sleeve Coupling onded ell x onded ell (continued) ches Pipe nhydride liphatic romatic SSS 500 (3,5).00 (203,2).79 (223,3).00 (203,2) (kg) STD 15HR STD 15HR 15HR 7.5 (3,2) N/ N/ R N/ N/ 00 (5,5) N/ N/ R N/ N/ 10 SSS 500 (3,5) 10.0 (25,0) 12 SSS 500 (3,5) 10.0 (25,0) (26,3) (337,1) 7.00 (177,) 7.00 (177,).7 (3,93) 21.5 (9,7) N/ N/ R N/ N/ N/ N/ R N/ N/ National Oilwell Varco has produced this brochure for general information only, and it is not intended for design purposes. lthough every effort has been made to maintain the accuracy and reliability of its contents, National Oilwell Varco in no way assumes responsibility for liability for any loss, damage or injury resulting from the use of information and data herein nor is any warranty expressed or implied. lways cross-reference the bulletin date with the most current version listed at the web site noted in this literature. North merica South merica Europe sia Pacific Middle East San Pedro ve. Suite 200 Estrada de cesso á Zona P.O. ox 6, 190 C No. 7, Tuas venue 3 P.O. ox 1732 San ntonio, Texas 7232 US dustrial Portuária de Suape, s/no. Geldermalsen, The Netherlands Jurong, Singapore Dubai, UE Phone: Recife, PE, razil Phone: Phone: Phone: Phone: fgspipe@nov.com 2015, National Oilwell Varco OG050 June 2015