AG INTERCHANGE IR I IRV I IRS SERIES POPPET INTERCHANGE COUPLERS Ag Style Interchange
|
|
|
- Johnathan Thomas
- 5 years ago
- Views:
Transcription
1 G INTERCHNGE IR I IRV I IRS SERIES POPPET INTERCHNGE COUPLERS g Style Interchange The griculture IR Series Hydraulic Quick Couplings offer automatic shut-off during disconnection. The IR features a variety of connection mechanisms: ball (IR), poppet (IRV), push-pull (IRS), or push-pull sleeve connectable under residual pressure (IRS PC). Protective Caps & Plugs page 103 FETURES Size range: 1/4 thru 1 Port options: NPT Interchanges with griculture/iso 5675 Working pressure: MPa/ psi range Carbon steel with zinc plating Hardened steel nipple Ball or poppet sealing valve PPLICTIONS nywhere automatic shut-off during disconnection is required Where interchangeability with existing equipment is necessary gricultural equipment 94
2 PRESSURE DROP POPPET INTERCHNGE COUPLERS OIL = ISO VG32, TEMP = 40C, VISCOSITY = MM²/S OIL = ISO VG32, TEMP = 40C, VISCOSITY = MM²/S Single-action sleeve for simpler connection/disconnection Valve gasket prevents extrusion at high flow rates Ball valves for auto shut-off during disconnection Hardened surface area and locking balls reduce brinelling Single-action sleeve for simpler connection/disconnection Hardened surface area and locking balls reduce brinelling stucchiusa.com fax:
3 G INTERCHNGE IR I IRV I IRS SERIES POPPET INTERCHNGE COUPLERS g Style Interchange SIZE DIGRM FE I E J H HEX. C F HEX. B D G DESCRIPTION BODY SIZE UNIT B C D E F G H I J UNIT IR14 1/4 1/4 IR38 3/8 3/8 IR12 1/2 1/2 IR34 3/4 3/4 IR WEIGHT FE mm kg inch lb mm kg inch lb mm kg inch lb mm kg inch lb mm kg inch lb PERFORMNCE MX. OPERTING PRESSURE COUPLED BURST PRESSURE COUPLED FE SPILLGE* DESCRIPTION SIZE ISO SIZE MPa psi MPa psi MPa psi MPa psi ml IR SERIES IR14 1/ IR38 3/ IR12 1/ IR34 3/ IR * Spillage is an indicative value of the fluid loss per couple-uncouple cycle. 96
4 SIZE DIGRM FE I E J H HEX. C F HEX. B D POPPET INTERCHNGE COUPLERS G DESCRIPTION BODY SIZE UNIT B C D E F G H I J UNIT IR14V 1/4 1/4 IR38V 3/8 3/8 IR12V 1/2 1/2 IR34V 3/4 3/4 IR100V 1 1 WEIGHT FE mm kg inch lb mm kg inch lb mm kg inch lb mm kg inch lb mm kg inch lb PERFORMNCE MX. OPERTING PRESSURE COUPLED BURST PRESSURE COUPLED FE SPILLGE* DESCRIPTION SIZE ISO SIZE MPa psi MPa psi MPa psi MPa psi ml IRV SERIES IR14V 1/ IR38V 3/ IR12V 1/ IR34V 3/ IR100V * Spillage is an indicative value of the fluid loss per couple-uncouple cycle. stucchiusa.com fax:
5 G INTERCHNGE IR I IRV I IRS SERIES POPPET INTERCHNGE COUPLERS g Style Interchange IRV NPT and SE Thread Poppet Style Interchange Coupling IRV NPT THRED COUPLER 1/4 1/4 NPT F. IR 14V NPT NIPPLE 1/4 1/4 NPT M. IR 14V NPT COUPLER 3/8 3/8 NPT F. IR 38V NPT NIPPLE 3/8 3/8 NPT M. IR 38V NPT COUPLER 1/2 1/2 NPT F. IR 12V NPT NIPPLE 1/2 1/2 NPT M. IR 12V NPT COUPLER 3/4 3/4 NPT F. IR 34V NPT NIPPLE 3/4 3/4 NPT M. IR 34V NPT COUPLER 1 1 NPT F. IR 100V NPT NIPPLE 1 1 NPT M. IR 100V NPT COUPLER 3/4 3/4 NPT F. IR 34V F NPT* NIPPLE 3/4 3/4 NPT M. IR 34V F NPT* IRV SE THRED COUPLER 1/4 3/8 SE F. IR 14V 38 SE NIPPLE 1/4 3/8 SE M. IR 14V 38 SE Nipple * Faster Interchange Only IRS V Poppet Valve griculture Push / Pull Sleeve VP NPT THRED COUPLER 1/2 1/2 NPT F. IRS 12V NPT COUPLER 1/2 1/2 SE F. I 12V SE IRS PC Poppet Valve griculture Push / Pull Sleeve Connect Under Pressure VP NPT THRED COUPLER 1/2 1/2 NPT F. IRS 12V PC NPT COUPLER 1/2 1/2 SE F. I 12V PC SE IRS TIC Ball Valve NPT Thread griculture Nipple with Seal Retainer IR TIC BLL VLVE NPT THRED NIPPLE 1/2 1/2 NPT M. IR 12 TIC NPT Nipple 98
6 IR Ball Valve NPT Thread Poppet Style Interchange Coupling IR BLL VLVE NPT THRED COUPLER 1/4 1/4 NPT F. IR 14 NPT NIPPLE 1/4 1/4 NPT M. IR 14 NPT COUPLER 3/8 3/8 NPT F. IR 38 NPT NIPPLE 3/8 3/8 NPT M. IR 38 NPT COUPLER 1/2 1/2 NPT F. IR 12 NPT NIPPLE 1/2 1/2 NPT M. IR 12 NPT COUPLER 3/4 3/4 NPT F. IR 34 NPT NIPPLE 3/4 3/4 NPT M. IR 34 NPT COUPLER 1 1 NPT F. IR 100 NPT NIPPLE 1 1 NPT M. IR 100 NPT COUPLER 3/4 3/4 NPT F. IR 34 F NPT* NIPPLE 3/4 3/4 NPT M. IR 34 F NPT* * Faster Interchange Only Nipple POPPET INTERCHNGE COUPLERS IRS Ball Valve NPT Thread Poppet Valve griculture Push/Pull Sleeve IRS BLL VLVE NPT THRED COUPLER 1/2 1/2 NPT F. IRS 12 NPT IR and IRV ccessories Dust Plug Nipple Dust Cap PRT ORDER CODE DESCRIPTION ORDER CODE DESCRIPTION IR & IRV COUPLER DUST PLUGS IR & IRV COUPLER DUST CPS 1/ CP F. IR14/IR14V CP M. IR14/IR14V 3/ CP F. IR38/IR38V CP M. IR38/IR38V 1/ CP F. IR12/IRS12/F. BIR CP M. IR1/M. BIR12 3/ CP F. IR 34/IR34V CP M. IR34/IR34V CP F. IR 100/IR100V CP M. IR100/IR100V Plug Cap stucchiusa.com fax:
Interchange Coupling. Poppet: Interchange Coupling
griculture Overview Stucchi griculture Series couplings are offered with a choice of either ball or poppet valve mechanisms for automatic shut-off during disconnection. The ball mechanism is the IR series,
Misc: Interchange Coupling
Wing Style Interchange Coupling Misc: Interchange Coupling Series: W Interchange: Parker 6100 - Seals: Nitrile - Threaded sleeve allows connection/disconnection under pressure - Coupler: brass material
1105 Windham Parkway Romeoville, IL USA stucchiusa.com. Stucchi USA YOUR NEXT GREAT SOLUTION Product Catalog REV018
1105 Windham Parkway Romeoville, IL 60446 USA 847.956.9720 stucchiusa.com Stucchi USA YOUR NEXT GREAT SOLUTION Product Catalog REV018 YOUR NEXT GREAT SOLUTION Stucchi, Inc. provides high-quality hydraulic
Product Index by Coupler Style & Interchange
Product Index by Coupler Style & Interchange Flat Face Style Series Description Page # A Premier ISO 16028 Interchange Flat Face Coupling In accordance with ISO 16028 for Interchange and Performance. s:
S51 Series. Thread Together, Maximum Flow with Minimum Spillage
S51 Series S A F E W A Y H Y D R A U L I C S Document No. 7951 rev. 003 Thread Together, Maximum Flow with Minimum Spillage Minimum Spill, High Flow, Heavy-Duty Quick Coupling SafeWay s S51 Series is a
MFD Filters (MGF Series) 8.3. MFD Mini Regulators (MSR Series) 8.4. MFD General Purpose Regulators (MGR Series) 8.5
ir Preparation Equipment MFD Filters (MGF Series) 8.3 MFD Mini Regulators (MSR Series) 8.4 MFD General Purpose Regulators (MGR Series) 8.5 MFD General Purpose Lubricators (MGL Series) 8.6 MFD Filter -
FITTINGS. Pneufit C composite and Pneufit M fittings Inch Ø 1/8" to 1/2" O/D tube
Pneufit C composite and Pneufit M fittings Ø 1/8" to 1/2" Ready to use. Over 1,000 composite push-in pneumatic fittings. Releasable stainless-steel grab-ring to grip nylon or polyurethane (8 or 9 durometer).
FIRG-QSERIES INTERCHANGE > ISO NFPA T HTMA (size 3/8 )
RQSRS NTRAN > SO 128 NPA T3..1 TMA (size ) SO 128 TNAL ATURS AN OPTONS nterchange SO 128 NPA T3..1 TMA (size ) Available sizes Sealing description Nitrile NRKM (VTON )PM KALRZ Material /treatment onnection
Cam & Groove Fittings. King Nipples
Cam & Groove Fittings King Nipples Index Aluminum Type A, Male Adapter x Female NPT...3 Type B, Female Coupler x Male NPT...3 Type C, Female Coupler x Hose Shank...4 Type D, Female Coupler x Female NPT...4
Impact resistant PBT body in black for Pneufit C and light gray for Pneufit M.
Pneufit C composite and Pneufit M fittings Ø Â" to Ë" Ready to use. Over 1,000 composite push-in pneumatic fittings. Releasable stainless-steel grab-ring to grip nylon or polyurethane (85 or 95 durometer).
components IC, PB PSCK Pressure switches Digital pressure gauges Pressure gauges GA, GS NV, FM Gauge accessories A, AH/R HLS, H, T
Pressure switches t series IC, PB PSCK t page 188 Digital pressure gauges DG 189 Pressure gauges Gauge accessories Manifolds, couplers, hoses, tubing G GA, GS NV, FM A, AH/R HLS, H, T 190 191 192 High
Mechanically actuated valves
Mechanically actuated valves /2-5/2 spool valves with /8 NPT threaded ports Installation in any position Comprehensive range of actuations, direct or servo-piloted Special versions on request Materials
In-Line Check Valves. Features. Valves. Working Pressures to: Flow Ranges to:
Valves In-Line Check Valves Working Pressures to: Flow Ranges to: 5700 psi/393 bar 200 gpm 757 lpm Features Steel constructed check valves are compatible with all non-corrosive liquids. Valves contain
FILTER REGULATORS AND PARTS
COMPRESSED AIR ACCESSORIES PRICING 5-2017 WWW.RAPIDAIRPRODUCTS.COM 800-954-3310 FILTER REGULATORS AND PARTS 175psi MAX INLET, 0-150psi adjustment range PRICE QUANTITY K93210 INLINE REGULATOR W/GAUGE, 1/4"
Check Valves PRODUCT DESCRIPTION FEATURES & BENEFITS TECHNICAL SPECIFICATIONS
Check Valves PRODUCT DESCRIPTION CPI check valves are designed for high pressure applications where reverse flow and leakage must be kept to a minimum. Typical applications include engine, pump and compressor
Fittings, Tubing & Nipples
s, Tubing & Nipples P Series Pipe s s to 15,000 psi (1034 bar) Since 1945 utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and manufacturing
ROTARY UNION 9000 SERIES GENERAL PURPOSE MODELS ADDED MODELS ADDED. Operating Parameters FEATURES & BENEFITS MEDIA PRESSURE* TEMPERATURE* SPEED*
ROTARY UNION 9 SERIES GENERAL PURPOSE Operating Parameters Steam, Hot Oil, Water MEDIA PRESSURE* 25 psi (Water), 75 psi (Steam), psi (Hot Oil) MODELS ADDED MODELS ADDED TEMPERATURE* 6 F (Hot Oil), 378
Needle Valves. We deliver confidence through quality products
We deliver confidence through quality products INTRODUCTION NEEDLE VALVES SD range of Needle valves come in various sizes, sealing styles, end connections and stem types. They are available in bar stock
In-Line Accessories. In-Line Pressure Gauges. Pressure Gauges. In-Line Accessories
Pressure Gauges Pressure gauges for monitoring system pressure Hoses and test points for sampling oil and determining ISO cleanliness levels Flanges to connect components Valves for system control In-Line
12 EEx d-conduit Material
12 EEx d-conduit Conduit Fittings Conduit fittings, BMF, with female/male union Series Nominal Ordering code Weight RN2095 BMF 1 1 /2" NPT 461 557 0 0,15 BMF 2 3 461 558 0 0,20 BMF 3 1" NPT 461 559 0 0,28
QUICK DISCONNECT COUPLINGS DIAGNOSTIC PRODUCTS
PROUT TLOG P1-10 PRESSURE OMPONENTS IN. QUIK ISONNET OUPLINGS IGNOSTI PROUTS VLVES PIPE, TUE N HOSE LMPS P R O V I I N G Q U L I T Y P R O U T S S I N E 1 9 8 T L E O O N T E N T S QUIK OUPLINGS 1-39 IGNOSTIS
Dill Air Controls Gauge and Air Chuck Catalog
Air Controls Gauge and Air Chuck Catalog Member of Tire and Rim Association ISO Registered Organization 1903 2009 Dill # Range Comments Finish Pack Available in various colors or 5600 10-75 PSI your company
AIR PREPARATION UNITS 3/4" NPT & 1" NPT SERIES
PNEUMATIC GROUP AIR PREPARATION UNITS 3/" NPT & " NPT SERIES 6 0, 0,6 0, 0,8 8 0,0 0 0 bar 6 0, 0,6 0, 0,8 8 0,0 0 0 bar 83 6 0, 0,6 0, 0,8 8 0,0 0 0 bar 6 0, 0,6 0, 0,8 0,0 0 0 bar 8 Port size Recommended
Tru-Fit 10k Fittings
Tru-Fit 10k Fittings TruFit 10K Pipe and Adapter Fittings are designed and manufactured to provide a reliable connection in high pressure systems running to 10,000 psi. Manufactured from fully-traceable
TECHNICAL SPECIFICATIONS. Carbon Steel / Stainless Steel One piece design BALL. Stainless Steel MAXIMUM OPERATING TEMPERATURE CRACKING PRESSURE
Check Valves PRODUCT DESCRIPTION CPI check valves are designed for high pressure applications where reverse flow and leakage must be kept to a minimum. Typical applications include engine, pump and compressor
RBL High-pressure AISI 316L stainless steel. For all fluids
RBL High-pressure AISI 316L stainless steel For all fluids Connections in high-pressure circuits carrying corrosive liquids and gases... Applications - High-pressure hydrogen circuits - High-pressure circuits
NPT (LP) 3000# & 6000# FITTINGS AND SMALL DIAMETRE SCHEDULE FITTINGS A105/LF2/A106/WPB
NPT (LP) 3000# & 6000# FITTINGS AND SMALL DIAMETRE ULE FITTINGS A105/LF2/A106/WPB TYPE X X 1 CAP 20 3/4 6000LB NPT 10 A105N NACE CAP 25 1 6000LB NPT 40 A105N NACE CAP 40 1 1/2 3000LB NPT 60 A105N CAP 40
Description The 4000 Series offers up to 8600 in-lb of torque and 25 gpm (continuous ratings). This is the corner stone of the Char-Lynn line.
Highlights Features ety of mounting flanges and output shafts options Benefits motor into a system tough applications Applications Description The 0 Series offers up to 0 in-lb of torque and gpm (continuous
Adapters Quick Reference Guide
Adapters Quick Reference Guide Minimizing Downtime in a Variety of Industries Construction Demolition Distribution Equipment Rental Excavation Manufacturing Marine Material Handling Municipalities Recycling
H Series Pneumatic Screwdrivers and Nutrunners. Products and Solutions for Assembly
H Series Pneumatic Screwdrivers and Nutrunners Products and Solutions for Assembly About We are personally committed to understanding and exceeding our customers requirements. We are committed to continuously
Eaton Quick Disconnect Couplings
Eaton Quick Disconnect Couplings Eaton Quick Disconnect Couplings Customizing Solutions for the Future Hydraulics and Beyond For over 50 years, Eaton has continued to manufacture and supply the highest
Contents. Coming soon from Teryair!!
Technical products for the ship suppl y industry Contents Teryair is a specialist manufacturer of precision pneumatic tools and marine industrial equipment. Our factories in Mumbai, India are certified
DURASEAL. High Integrity, Double Block and Bleed Plug Valve.
DURASEAL High Integrity, Double Block and Bleed Plug Valve www.franklinvalve.com How the DuraSeal Works An improved valve with a proven history We took an alternative path. Unlike many valve manufacturers
FITTINGS & ACCESSORIES CATALOG
& ACCESSORIES CATALOG 2018/2019 ACCESSORIES ACCESSORIES GAUGES Stainless steel construction Easy to read Precision movement Color-coded gauge faces Glycerin-filled for vibration protection Built in Snubbers
FasMate Quick Connectors Industry Applications:
FasMate Quick Connectors Industry Applications: The FasMate Series instantly seals threaded ports from vacuum up to 344.7 bar. The patented proprietary design makes sealing threaded ports as easy as 1,
Model Filter. Lubricator PL2000 PL3000 PL4000 PL5000 Port size (NPT) Max. Supply Pressure Max. Operating Pressure Regulating Range.
Filter, Regulator, Lubricator Combinations PC2 PC3 MODULAR DESIGN EASY ASSEMBLY/DISASSEMBLY EASY MATENANCE FE OIL ADJUSTMENT (ONE-TOUC) BOWL GUARD ON UPC4, UPC5 REFILL UNDER PRESSURE Standard Specifications
Control Panel Regulators
Control Panel Regulators Modular design for service & interchangeability Non-rising adjustment knob with push-pull lock ring feature Small package size and light weight construction Competitively priced
Compressed Air Cleaning Filter Series
Compressed Air Cleaning Filter For Water, Solid/Oil Separation and Deodorization Modular connection, Space-saving design, Labor-saving in piping! AMG C, AFF C, AM C, AMD C AMH C, AME C, AMF C Uses the
JB90A. FS65 Balanced-Pressure Series
J90 S W I V E L J O I N T S S65 alanced-pressure Series eatures and enefits New eroquip S65 alanced-pressure Series swivel joints answer customer requests for a more cost competitive, compact product.
Description The 4000 Series offers up to 8600 in-lb of torque and 25 gpm (continuous ratings). This is the corner stone of the Char-Lynn line.
Highlights Features displacements, a variety of mounting flanges and output shafts Reliable, proven design High efficiency Environmental protection options Benefits Flexiblilty in designing this motor
Adapters, Couplers and Fittings.
Adapters, Couplers and Fittings www.alliedhpi.com 1 Table of Contents QUICK-CONNECT ADAPTERS AND COUPLERS Chemetron Quick-Connect Adapters 3 Chemetron Quick-Connect Adapters ISO 4 Chemetron Quick-Connect
Compressor Accessories
Compressor Accessories Series 11 Superior quality for superior performance COMPRESSOR OIL Description MINERAL 11.1100 1 litre container 11.1400 4 litre container SYNTHETIC 11.1200 1 litre container 11.1500
Ball Valves. BV & BT Series. Features. Pressure vs. Temperature. Technical Data. Pressure Ratings
Ball Valves & Series Features Any end type and size combination available upon request Adjustable stem seal can be maintained in-line Panel mountable Bi-directional flow All valves are 00% factory tested
Environmental Submersible Pumps
Environmental Submersible Pumps Grundfos 85S Enviro Retrofitted Submersible Pumps These Grundfos submersible pumps are made of stainless steel and retrofitted with PTFE to handle the rigors of contaminated
Quick Sealing with a Twist to Connect Actuation Method
- Finger tighten seals up to 689 bar (10,000 psi) for pneumatic and hydraulic testing - Safe and Reliable leak tight connections to male and female threads - Eliminate thread damage, sealant and wrenches
TEKNOCRAFT INC. Proportional Valves. Mini Valves. Outlet Balanced Valves. Standard Valves. Your Proportional Valve Specialists
TEKNOCRAFT INC. Your Proportional Valve Specialists Proportional Valves Mini Valves Outlet Balanced Valves Standard Valves Table of Contents Teknocraft Unique Designs... 3 Mini Valves... 6 Outlet Balanced
MEDICAL GAS FITTINGS & CONNECTIONS Quick Reference Guide
MEDICAL GAS FITTINGS & CONNECTIONS Quick Reference Guide www.baycorporation.com ISO 9001 ISO 13485 Follow us: 867 Canterbury Rd., Westlake, OH 44145 USA P: 440.835.2212 888.835.3800 F: 440.835.1377 E:
Air Preparation Equipment
FRLS Improve system efficiency Side-by-side and stacking units available Modular design for easy connection and maintenance Variety of port sizes from #10-30 to 1" NPT pp. 170-174 FILTERS Capture solid
3/4" NPT 3080 MF 185-3/4-US 1" NPT 3080 MF US
Port size Recommended flow Page No. (l/min) 1/8" NPT 125 MF 007-1/8-US 111-112 1/4" NPT 125 MF 007-1/4-US 1/8" NPT 200 MF 012-1/8-US 113-114 1/4" NPT 200 MF 012-1/4-US 3/8" NPT 200 MF 012-3/8-US 3/8" NPT
Ross Brown Sales Pty. Ltd. Portable Pressure/Vacuum Comparator
Ross Brown Sales Pty. Ltd. Portable Pressure/Vacuum Comparator The data provided above is for information purposes only and no warranty of accuracy or reliability is given. Page 17 of 30 Pressure Generating
AIR PREPARATION uality DOES matter!
Qu ali ty DO E AIR PREPARATION S m at! r te AIR FILTER-REGULATOR-LUBRICATOR COMBINATION NAC 2000 01 D Model Range Body Size Port Size Manual Drain 2000 01: 1/8 NPT D Auto Drain 3000 02: 1/4 NPT 4000 03:
Environmental Submersible Pumps
Environmental Submersible Pumps Grundfos 230S Enviro Retrofitted Submersible Pumps These Grundfos submersible pumps are made of stainless steel and retrofitted with PTFE to handle the rigors of contaminated
B16.11 FORGED 3000# & 6000# FITTINGS AND SMALL DIAMETRE SCHEDULE FITTINGS A105/LF2/A106/WPB
B16.11 FORGED 3000# & 6000# FITTINGS AND SMALL DIAMETRE ULE FITTINGS A105/LF2/A106/WPB TYPE X X CAP 15 1/2 3000LB NPT 70 A105N CAP 20 3/4 6000LB NPT 10 A105N NACE LAME ITALY CAP 25 1 6000LB NPT 40 A105N
Inline Filters (F Series) Catalog 4130-F July 2005
Inline Filters (F Series) Catalog 4130-F July 2005 Catalog 4130-F Introduction Parker are designed for protection of instrumentation systems from undesirable materials. Component changes or repair and
COST, PROCESS & QUALITY IMPROVEMENT
COST, PROCESS & QUALITY IMPROVEMENT - Finger tighten seals up to 10,000 psi (689 bar) for pneumatic and hydraulic testing - Safe and Reliable leak tight connections to male and female threads - Eliminate
Side Channel R ing Blower
Side Channel R ing Blower ------------------------------------- INSTRUCTION MNUL ------------------------------------ RB20../ 30../ 40../ 50../ 60 / 80.. SERIES CONTENT PGE 1. SFETY REQUIREMENT... 1 2.
Interchange. Updated April 2009 (Rev. I) 4040 Norex Drive Chaska, Minnesota U.S.A. Phone: (952) Fax: (952)
Hydraulic Quick Coupling Interchange Updated April 2009 (Rev. I) Through the years, SafeWay Hydraulics, Inc. has accumulated the interchange information found within this booklet. Although we are reasonably
BGS MODEL HP-165M FLUID END PARTS LIST
BGS MODEL HP-165M FLUID END PARTS LIST ITEM PART NUMBER REQ'D PART DESCRIPTION NO. QTY 001 BGS 008-024179-350 1 POWER FRAME 007 BGS 170-012005-353 1 PIPE PLUG, MAGNETIC 014 BGS 001-013059-999 1 FILTER/BREATHER
Hydraulic Motor & Brake
whitedriveproducts SERIES 00-0 - 0 - HEVY DUTY Hydraulic Motor & rake DT DT (ll Series) For Heavy Duty pplications whitedriveproducts Overview series descriptions The most amazing aspect of the DT Series
12 series (Pneufit) Push-in fittings
> > Port size: Ø /8... /2, Ø 4... 2 mm tube size, SP and NPT threads > > Very compact units > > asy tube insertion for rapid assembly of pneumatic circuits > > Positive tube anchorage > > ll taper threads
type AKS and ESM Introduction
Temperature sensors type AKS and ESM Introduction Temperature sensors AKS and ESM are temperature dependent resistance sensors. The sensor unit consists of a platinum element the resistance value of which
Premium Chemical Free Iron/Sulphur Filter Installation Manual
Premium Chemical Free Iron/Sulphur Filter Installation Manual 220 Bayview Avenue Unit 18 Barrie, Ontario, Canada, L4N 4Y8 www.excaliburwater.com EXCALIBUR PREMIUM CHEMICAL FREE IRON/SULPHUR FILTER INSTALLATION
V-TEK Hygienic Butterfly Valves
STINLSS STLS LT. V-TK Hygienic utterfly Valves V-TK utterfly Valves have proven functionality and reliability. esigned in 1998, the V-TK valve allows full interchangeability of most handles, actuators
J350, J360 and J370 PLUMBING PARTS CATALOG
PREMIUM J0, J0 and J0 PLUMBING PARTS CATALOG PUMP Pump/Motor # * 0 * 00- HOUSING: FRONT 00-0 O-RING: FRONT HOUSING 00- IMPELLER:. DIA 00-0 PUMP: SEAL ASSY / VITON 00- HOUSING: REAR BRACKET 00-0 MOTOR:.HP
THOMAFLUID - Handbook III
Reichelt Chemietechnik GmbH + Co. THOMAFLUID - Handbook III Capillary Connectors Micro Connectors Macro Connectors Pipe Connectors Welding Sleeves Bonded Socket Joints Plug-in Connectors HPLC Connectors
Installation, operation and service manual BMA 05
BMA 05 Please read this manual carefully before installing and using the BMA 05 safe measuring coupling. Wigersma & Sikkema warranty obligations do not apply in case of non-observance of this manual. 1
PRODUCT EQUIVALENT GUIDE
2" LIGHT WEIGHT MINING REFUELLING NOZZLES BNM800L 2" Nozzle with light shut down pressure (25-35kPa@ 400LPM) (Includes Plug & Spring AUS21A029) BNM800ML 2" Nozzle with medium light shut down pressure (45-55kPa@
SE Optimus Combination Shower and Eye And Face Wash System EYEWASH FEATURES: SHOWER FEATURES FINISH: OPTIONS: WARRANTY:
Optimus Combination Shower and Eye And Face Wash System EYEWASH FEATURES: Independent eye wash & face wash integrated into one, multi-functioning safety unit. Aerated sprays for eyewash comfort & innovative
N4i Installation Manual. (picture of N4i screen)
N4i Installation Manual (picture of N4i screen) 1 Table of Contents N4i Computer Parts List... 4 Netpulse Stabilizer Bar Parts List... 6 Hardware List... 7 Tools Needed for Installation... 7 N4i Assembly
Today s Improved Compressed Air Piping Method
STEP 1 STEP 2 STEP 3 (see page 8 for detailed instructions) Today s Improved Compressed Air Piping Method FAST INSTALLATION TIME -Aluminum piping is easy to cut and lift -O-ring seals ensure a leak free
P SERIES. 250 psi NFPA Pneumatic Cylinder TECHNICAL BROCHURE. Bore Sizes from 11/2 to 14
Actuation Solutions and Systems for the P SERIES 250 psi NFPA Pneumatic Cylinder Bore Sizes from 11/2 to 14 Actuation Solutions and Systems for the Design & Materials Temperature Ratings Low Temp. -54
CALL TODAY C302 Rivnut & Plusnut Header Operating Instructions & Parts List ISO CERTIFIED
C302 Rivnut & Plusnut Header Operating Instructions & Parts List Table of Contents Page. Introduction 3 General 3 Preliminary Adjustment 3 Air Supply 3 Lubrication 3 2. Operation and Adjustment 3 Operating
Plant, components and devices for very high and high pressures (7000 bar and over)
Plant, components and devices for very high and high pressures (7000 bar and over) VALVES AND FITTINGS UP TO 1035 BAR MATERIALS All fittings are manufactured from EN 1.4404 / AISI 316L stainless steel
Environmental Submersible Pumps
Environmental Submersible Pumps Grundfos 300S Enviro Retrofitted Submersible Pumps These Grundfos submersible pumps are made of stainless steel and retrofitted with PTFE to handle the rigors of contaminated
...our linkages, your solution. Ball & Socket Joints
...our linkaes, your solution Ball & Socket ov-ball-and-socket-joints-divider - Updated - 12-01-2017 Overview Ball & Socket Ball & Socket Ball and Socket Ball and socket joints to DIN 71802 available in
Installation, operation and service manual BMA 04
BMA 04 Please read this manual carefully before installing and using the BMA 04 safe measuring coupling. Wigersma & Sikkema warranty obligations do not apply in case of non-observance of this manual. 1
ore Mounting XP 9/16" (02) 3/4" (04) $27.15 $28.85 $28.95 $ /16" (09) $ /2" (17) $38.80 $32.85 $ " (31) $60.85 $65.80 ore Mounti
The model number of all P consists of three alphanumeric clusters. These designate product type, bore size and stroke length, and options. Please refer elrin nd ap ylinder ore Size 02 9/16" 04 3/4" 09
D.O.T Fittings. Version 2015
D.O.T Fittings Version 2015 Revised 3/18/2015 Fax your order to: (763) 398-2590. customerservice@polyconn.com. www.polyconn.com. Questions call: (763)559-0388 3062 Ranchview Lane North. Plymouth, MN 55447
12 series (Pneufit) Push-in fittings Ø 1/8... 1/2, Ø mm tube size, BSP and NPT threads
2 series (Pneufit) Push-in fittings Ø /8... /2, Ø 4... 2 mm tube size, SP and NPT threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage ll taper
Areamaster 250/400 Integrally Ballasted Floodlights 100 W to 400 W HID For hazardous and marine locations.
Lighting HID NEC/CEC ENCLOSED AND GASKETED CLASS/ZONE RATED FLOODLIGHT Applications Powerful, efficient weatherproof lighting for medium and large areas such as: Pulp and paper mills Processing plants
SUMMARY UNITS INTRODUCTION PAGE 2-4 KEY TO CODES PAGE 2-7 FILTER PAGE 2-8 DEPURATOR PAGE 2-11 ACTIVE CARBON FILTER PAGE 2-14.
SUMMARY INTRODUCTION PAGE - KEY TO CODES PAGE -7 FILTER PAGE -8 DEPURATOR PAGE - SUMMARY Syntesi ACTIVE CARBON FILTER PAGE - REGULATOR PAGE -7 IN-SERIES REGULATOR PAGE - FILTER-REGULATOR PAGE - LUBRICATOR
Down-the-hole drill strings for CM 700 series
Secoroc Rock Drilling Tools Down-the-hole drill strings for CM 700 series Secoroc high quality DTH drill string equipment Atlas Copco Secoroc offers a complete DTH drill string for the CM 700 series. This
J320, J330 and J340 PLUMBING PARTS CATALOG
PREMIUM J0, J0 and J0 PLUMBING PARTS CATALOG PREMIUM PUMP Pump/Motor # Location (for the J0 and J0) Pump/Motor # Location (for the J0) * 9 0 * 00- HOUSING: FRONT 00-90 O-RING: FRONT HOUSING 00-9 IMPELLER:.9
Celebrating 39 Years!
CATALOG 39 Celebrating 39 Years! of Family Owned, FONTANET American Made Products TABLE OF CONTENTS Ball Valves Bolted Polypropylene Ball Valves 4 Bolt 6 Bolt 8 Bolt Compact Angle Valve Single Union HM
RBE modular quick-release coupling range All fluids
RBE modular quick-release coupling range All fluids The right solution Applications Gas: hydrogen, argon, nitrogen, helium... Steam Solvents, acids Liquids High pressure Process vacuum... In all industrial
Ring Type Joints are widely used by the Oil, Gas, Petrochemical and Offshore Industries in applications subject to high pressures and temperatures.
Type Joints Noble Engineers is an independent company manufacturing and supplying a variety of high quality sealing products designed for flange applications in the industrial and manufacturing sectors.
15K CATALOG. 15K psi Water Blasting Parts and Accessories. Accessories. Control Guns. Fittings. Rigid Lances. Flex Lances. Hoses. Nozzles.
2015 CATALOG Always Providing Service 15K psi Water Blasting Parts and Accessories Accessories Calder Ltd Prescott Drive Warndon Worcester WR4 9NE United Kingdom Control Guns web: email: tel: fax: www.calderltd.com
service Quality Delivery NorgrenExpress.com EXPrEss PLUS M/50 switches Mounts c/ Ø 25 to 63 mm ACT-31
M/50 switches switch P/N cable Material type M/50/lsU/*v pvc reed led M/50/eaN/*v pvc solid state sinking (NpN) led M/50/eap/*v pvc solid state sourcing (pnp) led Mounts bore Foot Mounts center support
Liquid level transmitter Type AKS 41 / 41U REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Liquid level transmitter Type AKS 41 / 41U REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction........................................................................................3
Japanese Industrial Standard 30 Flare (BSPP Threads)
Japanese Industrial Standard () Connection Types / Identification Japanese Industrial Standard hydraulic connections include 30 flare and 30 cone connections (both internal sealing), parallel and tapered
ROTARY UNION 5000 SERIES STAINLESS STEEL - GENERAL PURPOSE MODELS ADDED. Operating Parameters FEATURES & BENEFITS CONFIGURATION OPTIONS
ROTARY UNION 5 SERIES STAINESS STEE - GENERA PURPOSE Operating Parameters SPEED,, 3,6 (MT) PRESSURE 75 psi (Water), psi (Steam), psi (Hot Oil), 3 psi (Air) TEMPERATURE 3 F (Water), 35 F (Steam), 395 F
THIS PRODUCT DOES NOT CONTAIN TOBACCO OR CONCENTRATE MATERIALS.
User Manual Thank you for purchasing the Healthy Rips FURY 2 for dry herb, oil & wax. Read and follow the instructions carefully before your first use of the FURY 2 vaporizer. It is recommended that these
Crystal Pressure Fittings CPF
Common Specifications (applies to all CPF fittings in this datasheet) DESCRIPTION CPF is an improved cone type fitting system that adds a unique o-ring sealing system which permits leak free connections
Air Preparation Equipment
rochure ir Preparation quipment Setting a new standard for: Quality Reliability Value lobal ompatibility ilters M Series M ir Preparation quipment M -8-S-W- MOL imensions (mm, except where noted) RKT INLU
Bee Valve Inc. has stood the test of time.
IO 9001:2008 Bee Valve Inc. has stood the test of time. Bee Valve Inc. traces its origin back a half-a-century to the beginning of the modern plastics industry. The company was on the developmental forefront
RL/B MZ SERIES. Two Stage Light Oil Burners FIRING RATES LIGHT OIL RL 300/B MZ RL 400/B MZ. 600/ kw 1000/ kw
RL/B MZ series burners are characterised by a modular monoblock structure that means all necessary components can be combined in a single unit thus making installation easier, faster and, above all, more
HR-200/300/400/500 Series
Test Equipment Rockwell Hardness Testing Machines HR-200/300/400/500 Series Bulletin No. 2025 Four economical Rockwell Hardness Testing Machines to HR-210MR 963-220-10A Rockwell Hardness Testing Machine
BROEN UNIFLEX FITTINGS FOR NON-BURNING 2.0 GASES / VACUUM
BROEN UNIFLEX FITTINGS FOR NON-BURNING 2.0 GASES / ACUUM LAB TABLE OF CONTENTS Content Page Table of Content 2 Product Overview 3 BROEN UniFlex TM BASIC 4-5 Fittings for Non-burnig 2.0 Gases/acuum Turret
STAR High Pressure Threaded Fittings
STR High ed Fittings NOV Fiber Glass Systems provides a broad range of high pressure fiberglass fittings and accessories to accompany our high pressure line pipe. This allows for a complete corrosion free
Top Performance. Uncompromising from the bottom to the top Eppendorf Varispenser 2 and Varispenser 2x
Top Performance Uncompromising from the bottom to the top Eppendorf Varispenser 2 and Varispenser 2x 2 Varispenser 2/2x Eppendorf Varispenser 2 / 2x For laboratory tasks with aliquots of aggressive solutions