IMAGE 350 ELLIPTICAL TRAINER IMAGE 350 CARE INSTRUCTION AND ASSEMBLY MANUAL. FITNESS #1 HOME

Transcription

1 TROJAN MY SPACE MY TIME IMAGE 350 ELLIPTICAL TRAINER IMAGE 350 CARE INSTRUCTION AND ASSEMBLY MANUAL CAUTION READ ALL PRECAUTIONS AND INSTRUCTIONS IN THIS MANUAL BEFORE USING THIS EQUIPMENT KEEP THIS MANUAL FOR FUTURE REFERENCE WARRANTY TROJAN #1 HOME SOUTH AFRICA S FITNESS SINCE

2 INDEX PAGE 1. SAFETY INSTRUCTIONS 3 2. PRE ASSEMBLY CHECK LIST 5 3. HARDWARE LIST 6 4. ASSEMBLY STEPS 8 5. COMPUTER FUNCTIONS FITNESS TIPS & TECHNIQUES CONDITIONING GUIDELINES WARM -UP AND COOL-DOWN FREQUENTLY ASKED QUESTIONS PARTS LIST EXPLODED DRAWING TROJAN 1 YEAR WARRANTY TROJAN REPAIRS PROCEDURE 22

3 1. SAFETY INSTRUCTIONS It is the sole responsibility of the purchaser of TROJAN products to read the owner s manual, warning labels and instruct all individuals, on proper usage of the equipment. Understanding each and every warning to the fullest is important. If any of these instructions or warnings are unclear please contact Trojan Customer Services on (0861 Trojan), within the Republic of South Africa. The equipment is only intended for HOME USE and is NOT INTENDED FOR COMMERCIAL, INSTITUTIONAL AND/OR STUDIO FACILITIES USE. Contact TROJAN with any questions regarding this classification. It is recommended that all users of TROJAN be informed of the following information prior to use. HEALTH WARNING Before starting any exercise or conditioning program you should consult with your personal physician to see if you require a complete physical exam. This is especially important if you are over the age of 35 or have never exercised, are pregnant or suffer from any illness. If at any time during exercise you feel faint, dizzy or experience pain, stop exercising immediately and consult your physician. To avoid muscular pain and strain, begin each workout by stretching and warming up and end each session by cooling down and stretching. ACCESS CONTROL TROJAN recommends that all fitness equipment be used in a supervised area. It is recommended that the equipment be located in an access controlled area. Control is the responsibility of the owner. Keep children away from all equipment. Parents or other supervising adults must provide close supervision of children if the equipment is used in the presence of children. INSTALLATION TROJAN recommends that all equipment: Be secured to or set up on a solid, level surface to stabilize and eliminate rocking or tipping over during training. Be set up inside your home away from moisture and dust (the equipment is not designed for outdoor use). Be set up with sufficient ventilation to ensure proper operation. Be set up with sufficient space around the equipment so that all exercises can be completed safely. It is recommended that there should be at least 1m of space around the equipment where access is required to exercise. For treadmills it is recommended that you have 2 m of space behind the running deck. Be installed by our team of installers. PROPER USAGE Do not use the equipment in any way other than as designed or intended by the manufacturer. It is imperative that TROJAN equipment is used properly to avoid injury. Injuries may result from exercising improperly or excessively. Your TROJAN equipment should only be used by one person at a time. Be careful to maintain your balance while using, mounting, dismounting, folding, unfolding or assembling your TROJAN equipment to avoid injury. Do not attempt to adjust any seats / pads / pulleys etc. while you are on your TROJAN equipment. Servicing other than the procedures in this manual should be performed by an authorized service representative only. DANGER: Always unplug the power cord before cleaning any equipment powered by electricity

4 SAFETY INSTRUCTIONS INSPECTION Do not use or permit use of any equipment that is damaged or has worn or broken parts. For all TROJAN equipment use only replacement parts supplied by TROJAN. Always make sure that all nuts and bolts are tightened prior to each use. Cables and belts pose an extreme liability if used when frayed. Always replace any cable at first sign of wear. Routinely inspect all accessory clips that join attachments to the cables and replace at the first sign of wear. Maintain labels and nameplates do not remove labels for any reason. They contain important information. Equipment maintenance Preventative maintenance is the key to smooth operating equipment. Please ensure that you follow our maintenance tips to ensure the continued correct function of your TROJAN equipment. Before any use, examine all accessories approved for use with the TROJAN equipment for damage or wear. Should your Trojan equipment appear damaged or worn do not attempt to use or repair the equipment yourself. Please contact our service department on (0861 Trojan) to arrange a repair. OPERATING WARNINGS It is the purchaser s responsibility to instruct all users as to the proper operating procedures of all TROJAN equipment. Keep children away from all moving parts and away from all strength equipment. Parents must provide close supervision of children if the equipment is used in the presence of children. Do not wear loose fitting clothing or jewellery when using the equipment. Proper footware should be worn at all times. It is also recommended that users tie up long hair to avoid contact with moving parts. Ensure that anyone not using the equipment stays clear of the user, accessories and moving parts while the machine is in operation. USER WEIGHT LIMITATIONS This TROJAN IMAGE 350 may not be used by persons weighing more than 110kg. ELECTRICAL SAFETY Keep the power cord away from heated surfaces. Never use the equipment if the power cable or plug is frayed or damaged. Never use the equipment if the cord, equipment or surrounding floor area is wet or damp. All electrical products must be grounded. This product is supplier with the necessary grounding connections. Do not modify the plug provided with the product. If the plug will not fit into the power outlet, have a proper outlet installed by a qualified electrician. SAVE THIS INSTRUCTION MANUAL FOR FUTURE USE AND REFERENCE If any of these instructions or warnings are unclear please contact Trojan Customer Services on (0861 Trojan), within the Republic of South Africa or visit

5 2. PRE ASSEMBLY CHECK LIST Thank you for choosing the TROJAN IMAGE 350. We take great pride in producing this quality product and hope it will provide many hours of quality exercise to make you feel better, look better and enjoy life to its fullest. Yes, it is a proven fact that a regular exercise program can improve your physical and mental health. Too often, our busy lifestyles limit our time and opportunity to exercise. The TROJAN IMAGE 350 provides a convenient and simple method to begin your assault on getting your body in shape and achieving a healthier lifestyle. Before reading further, please familiarise yourself with the parts that are labelled. Read this manual carefully before using the TROJAN IMAGE 350. HAND PULSE SENSOR SMALL HANDLE BAR CONSOL HANDLE BAR CONSOL MAST MAIN FRAME PEDAL CONNECTING ARM REAR STABILIZER FRONT STABILIZER

6 3. HARDWARE LIST

7 HARDWARE LIST NO DESCRIPTION QUANTITY 1/29R&L/2 Main Frame with Chain Cover, Pedal Tube Weld 1 set 7/46/48/12/9/19 Front Post/Axle Decolation/Washer/Screw/ Hand Pulse Wire 1 set 3R&L/27/28/24/25R&L Upper Handle Bar (R&L) with Foam Grip,End Cap, Hand Pulse Wire, Hand Pulse 1 set 4 Bottom Handle Bar 2 11/51 Monitor with Sensor Wire, 4 Screws 1 40R&L Foot Pedal (R&L) 1 pair 10/90/12/18 Handlebar Weld with Foam Grip, 2 Spring Washer, 2 Screws 1 set 81 Transportation Wheel 2 44 End Cap 2 22/23/8 Handlebar Decoration/ Round Head Screw/Pivot Cover 2 sets NO Description Q ty Specification Drawings 9 Allen Head Screw 4 M8 x 20mm 12 Spring Washer 4 M8 14 Machine Screw 8 M4 x15mm 21 Allen Head Screw 4 M6 x16mm 36 Axle Cover 4 25*10.5*2mm 39 Pedal Axle 2 41 Hex Head Screw 4 M6 x 35mm 42 Nut 4 M6 82 Adjustable Knob 4 M6 102 Allen Wrench 2 4mm 103 Allen Wrench 1 6mm 104 Universal Wrench

8 4. ASSEMBLY STEPS Instructions for assembly Unpack the carton and using the parts list check that all parts are accounted for. Do not dispose of the packaging material until assembly is completed. An Allen Wrench is provided for use in assembly. Step 1 Attach 2 Transportation Wheels (81) to the Front Stabilizer of Main Frame (1) and secure with 4 Screws (14) and 2 Adjustable Knobs (82). Attach 2 End Caps (44) to the Rear Stabilizer of Main Frame (1) and secured with 4 Screws (14) and 2 Adjustable Knobs (82). Note: you can use the Adjustable Knobs (82) to level the bike. Step 2 Remove the 6 pre-assembled Allen Head Bolts (34), 6 Spring Washers (12), 4 Flat Washers (48) and 2 Curved Washers (47) from the Mounting Post Tube of Main Frame (1). Pull Upper Cable (87) through the Front Post using Link Wire (88) and join to Lower Cable (87). Throw away Link Wire (91). Put Front Post (7) into the Mounting Post of Main Frame and secure with 6 Allen Head Bolts (34), 6 Spring Washers (12), 4 Flat Washers (48) and 2 Curved Washers (47). Caution: Ensure that cables are not damaged during assembly or when tightening screws

9 ASSEMBLY STEPS Step 3 Attach the Left Upper Swing Bar (3L) to the Left Lower Handlebar (4) and secure with 2 Nuts (42), and 2 Hex Head Bolts (41). Repeat the same procedure for Right Swing Bar (3R) and the Right Lower Handlebar (4) connection. Step 4 Remove the pre-assembled Allen Head Bolt (9), Spring Washer (12) and Flat Washer (48) from the left side Axle of Front Post (7). Slide the Plastic Sleeve (46) and Washer (45) onto the left side of Axle of Front Post (7). Attach the Left Swing Bar (3L) to the left side of Axle (7) and secure with Allen Head Bolt (9), Spring Washer (12) and Flat Washer (48). Please tighten the Round Head Bolts (9) well after all parts are assembled. Do the same procedure for Right Swing Bar (3R) and Axle of Front Post (7) connection. Place Pivot Cover (8) on the end of both Round Head Bolts (9). Attach the Handle Bar Decoration (22) to Left and Right Swing Bar, securing with 2 Round Head Screws (23) on each side. Step 5 Attach Left Pedal (40L) to the Left Pedal Arm (2L) with 2 Bolts (9) and 2 Spring Washers (12). Repeat the same procedure for Right Pedal (40R), Right Pedal Tube (2R)

10 ASSEMBLY STEPS Step 6 Apply a small amount of grease to Pedal Tube Axle (39). A second person must hold the Left Pedal Tube (2L) inside the bracket on the Left Lower Handlebar (4). Insert the Pedal Tube Axle (39) through Lower Handlebar (4) and the Pedal Tube (2L). Place an Axle Cover (36) into each of the Pedal Tubes (39). and insert and tighten Screw (21). Repeat the same procedure for Right Lower Handlebar (4) and Right Pedal Tube (2R). Step 7 Insert Batteries into Consol (see page 11). Remove the 4 pre-assembled Screws (51) from the bottom of Monitor (11). Connect the plug of Middle Section Sensor Wire (87) to the Sensor Socket of Monitor (11). Connect the plug of Hand Pulse Wire (19) to the Monitor (11). Attach the Monitor (11) to the Monitor Bracket of Front Post (7) with 4 Screws (51). Caution: Ensure that cables are not damaged during assembly or when tightening screws Step 8 Remove the 2 pre-assembled Screws (18) and 2 Spring Washer (12) from the Small Handlebar (10). Secure the Small Handlebar (10) to the welded handlebar bracket on the Front Post (7) with 2 Screws (18) and 2 Spring Washers (12). Recheck all bolts and nuts are tightened securely before using the machine

11 5. COMPUTER FUNCTIONS 7 DISPLAY FUNCTIONS: TIME: SPEED: RPM: DISTANCE: CALORIES: WATT: HEART RATE: Displays the exercise time 00:00-99:59 (Count up) or :00 (Count down). Displays the current speed in kph ( KPH / MPH). Displays the number of pedal revolutions per minute. Displays the distance covered ( Kilometers /Miles). Displays the calories burnt off ( K.cal). Displays the resistance level. Displays heart rate in beats per minute. When entering your AGE, the limits are set at 1-99 years OPERATING PROCEDURES When the power is first switched on, the LCD window will be illuminated for 2 seconds and the Exercise Monitor s CPU will set the resistance level to Level 1. The system is now in Initial Mode. DATA INPUT KEYS UP: DOWN: ENTER: MODE: START/PAUSE: RESET: Use to select a program or increase the resistance level, time or age. Use to select a program or decrease the resistance level, time or age. In Initial Mode, press the ENTER key to enter Time or Age settings. In Initial Mode, press the MODE key to select Speed/RPM and Calorie/Watt modes. Use to start or stop exercising. Holding this button for 3 seconds will reset all values to zero and return the Exercise Monitor to its standby power-on mode. To erase the data values to zero. Note: The computer will shut off automatically after four minutes of inactivity. All function values will be kept. Push the MODE button and hold it down for three seconds to reset all functions to zero. BATTERY INSTALLATION: The consol requires 4 AA batteries (Alkaline batteries are recommended). Press the tab on the battery cover and remove it. Insert 4 batteries into the consol. Make sure that the batteries are oriented as shown in the diagram on the battery cover. Then, re-attach the battery cover

12 COMPUTER FUNCTIONS LCD DISPLAY UNIT This system provides 12 different Exercise Programs. When you preset the workout time, the system will divide the time into 10 regular intervals, which will become your Exercise Time Segments. If you do not preset your intended workout time, the system program will count up the workout time in one-second increments. OPERATING PROGRAMS 1-10 Press the START/PAUSE key for 3 seconds to enter the initial mode. Press the +/UP or -/DOWN key to choose the exercise program you want. The program profiles will be displayed on the LCD screen. When you have completed the Program setting, press the ENTER key to enter Time setting. Press +/UP or -/DOWN key to increase or decrease your Exercise Program resistance. OPERATING PROGRAM These are unique programs. They allow the Exercise Monitor to automatically adjust the workout resistance according to your heart rate. If your current heart rate is higher than your Target Heart Rate, the Exercise Monitor CPU will automatically decrease the workout resistance. If your current heart rate is lower than your Target Heart Rate, the Exercise Monitor CPU will automatically increase the workout resistance. PROGRAM NO % HEART RATE CONTROL PROGRAM To program your target heart rate correctly please use the following formula YOUR MAXIMUM HEART RATE = 220 -YOUR AGE. TARGET HEART RATE = 60% x YOUR MAXIMUM HEART RATE PROGRAM NO % HEART RATE CONTROL PROGRAM To program your target heart rate correctly please use the following formula YOUR MAXIMUM HEART RATE = 220 YOUR AGE. TARGET HEART RATE = 85% x YOUR MAXIMUM HEART RATE NOTE: If there is no input signal for over 256 seconds, the system will enter Sleep Mode and all displays will turn off automatically. Simply re-starting or pressing any button will result in the LCD screen powering up again. To conserve power, in Programs P2 P10, if you do not set your intended exercise time, please remember to push the START/PAUSE key to stop the system when your have completed your exercise routine. The Target Heart Rate will only be visible on the LCD screen when either of the two Heart Rate Control programs are selected. There are 2 possible types of pulse sensor attachments; Hand Pulse and Ear Pulse. Each pulse rate signal will be accompanied by a flashing symbol. As an additional power saving facility, if there is no Pulse input for more than 4 seconds, the Exercise Monitor CPU will turn off the pulse circuit automatically. Press the START/PAUSE key to restart pulse function

13 6. FITNESS TIPS AND TECHNIQUES AEROBIC EXERCISE Aerobic exercise is any sustained activity that sends oxygen to your muscles via your heart and lungs. Aerobic exercise improves the fitness of your lungs and heart - your body s most important muscle. Aerobic exercise fitness is promoted by any activity that uses your large muscles (arms, legs, or buttock, for example). Your heart beats quickly and you breathe deeply. An aerobic exercise should be part of your entire exercise routine. WEIGHT TRAINING Along with aerobic exercising which helps get rid of and keep off the excess fat that our bodies can store, weight training is an essential part of the exercise routine process. Weight training helps tone, build and strengthen muscle. If you are working above your target zone, you may want to do a lesser amount of reps. And as always consult your physician before beginning any exercise program. MUSCLE CHART ELLIPTICAL The exercise routine that is performed on the elliptical will develop the lower and upper body muscle group as well as condition the circulatory system and provide a good aerobic workout. These muscle groups are highlighted on the muscle chart below

14 7. CONDITIONING GUIDELINES How you begin your exercise program depends on your physical condition. If you have been inactive for several years, or are severely overweight, you must start slowly and increase your time on the equipment; a few minutes per workout. Initially, you may be able to exercise only for a few minutes in your target zone, however, your aerobic fitness will improve over the next six to eight weeks. Don t be discouraged if it takes longer. It s important to work at your own pace. Ultimately, you ll be able to exercise continuously for 30 minutes. The better your aerobic fitness, the harder you will have to work to stay in your target zone. Please remember these essentials : Have your doctor review your training and diet programs to advise you of a workout routine you should adopt. Begin your training program slowly with realistic goals that have been set by you and your doctor. Monitor your pulse frequently. Establish your target heart rate based on your age and condition. Set up your equipment on a flat, even surface at least 3 feet from walls and furniture. EXERCISE INTENSITY To maximize the benefits of exercising, it is important to exercise with the proper intensity. The proper intensity level can be found by using your heart rate as a guide. For effective aerobic exercise, your heart rate should be maintained at a level between 65% and 85% of your maximum heart rate as you exercise. This is known as your target zone. You can find your target zone in the table below. During the first few months of your exercise program, keep your heart rate near the low end of your target zone as you exercise. After a few months, your heart rate can be increased gradually until it is near the middle of your target zone as you exercise. To measure your heart rate, stop exercising but continue moving your legs or walking around and place two fingers on your wrist. Take a six-second heartbeat count and multiply the results by 10 to find your heart rate. For example, if your six-second heartbeat count is 14, your heart rate is 140 beats per minute. (A six-seconds count is used because your heart rate will drop rapidly when you stop exercising.) Adjust the intensity of your exercise until your heart rate is at the proper level. For more information visit

15 8. WARM-UP AND COOL-DOWN WORKOUT GUIDELINES Each workout should include the following three parts: A warm-up, consisting of 5 to 10 minutes of stretching and light exercise. A proper warm-up increases your body temperature, heart rate, and circulation in preparation for exercise. Training zone exercise, consisting of 20 to 30 minutes of exercising with your heart rate in your training zone. (Note: During the first few weeks of your exercise program, do not keep your heart rate in your training zone for longer than 20 minutes.) A cool-down, with 5 to 10 minutes of stretching. This will increase the flexibility of your muscles and will help to prevent post-exercise problems. EXERCISE FREQUENCY To maintain or improve your condition, plan three workouts each week, with at least one day of rest between workouts. After a few months of regular exercise, you may complete up to five workouts each week, if desired. Remember, the key to success is make exercise a regular and enjoyable part of your everyday life. 1 SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch, never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible. Hold for 15 counts, then relax. Repeat 3 times. Stretches: Hamstrings, back of knees and back Hamstring Stretch Sit with one leg extended. Bring the sole of the opposite foot toward you and rest it against the inner thigh of your extended leg. Reach toward your toes as far as possible. Hold for 15 counts, then relax. Repeat 3 times for each leg. Stretches: Hamstrings, lower back and groin Calf/Achilles Stretch With one leg in front of the other, reach forward and place your hands against a wall. Keep your back leg straight and your back foot flat on the floor. Bend your front leg, lean forward and move your hips toward the wall. Hold for 15 counts, then relax. Repeat 3 times for each leg. To cause further stretching of the achilles tendons, bend your back leg as well. Stretches: Calves, achilles tendons and ankles Quadriceps Stretch With one hand against a wall for balance, reach back and grasp one foot with your other hand. Bring your heel as close to your buttocks as possible. Hold for 15 counts, then relax. Repeat 3 times for each leg. Stretches: Quadriceps and hip muscles. 5. Inner Thigh Stretch Sit with the soles of your feet together and your knees outward. Pull your feet toward your groin area as far as possible. Hold for 15 counts, then relax. Repeat 3 times. Stretches: Quadriceps and hip muscles. For more information visit

16 9. FREQUENTLY ASKED QUESTIONS IMAGE The consol is showing the incorrect reading. Check that the connector on the back of the consol is plugged in correctly. Check the batteries in the consol are inserted in the correct orientation and that they are in working condition Press the reset button to test if the error has corrected itself. 2. The functions are not working properly or display incorrectly. Check that the connector on the back of the consol is plugged in correctly. Press the reset button to test if the error has corrected itself. 3. There is no pulse reading or the data displayed is unstable. Check that there is a proper connection between your hands and the hand pulse connector (the hand pulse sensors will not operate correctly if your skin is extremely dry. Moisten your hands and try again). Check that the connected wire is not broken. Reset and carefully follow the instructions in the manual. Note Avoid moving your hands while exercising and hold the hand pulse sensors firmly while exercising. If you do move your hands while exercising, give the computer a few seconds to resample and display your correct heart pulse rate. 4. My LCD is dim Check if the unit is in direct sunlight. Move if necessary. If display does not improve, please contact Maintenance and cleaning. Use a clean, damp, soft rag to clean the surface. Use a mild detergent to clean the dirty spots. Do not use a steel brush or emery cloth to clean the surface. Immediately after exercise wipe off any sweat from the surface of the equipment. Perspiration contains salt which could ruin the equipment

17 10. PARTS LIST NO Q TY Description 1 1 Main Frame NO Q TY Description 26 2 Ø12.5 Protect Cable Plug 2R/L 1Pair Pedal Tube Weld 27 2 Ø32 x 460 x 5.0mm Foam Grip 3R/L 1Pair Upper Handlebar Weld 28 2 Ø50 x Ø29 Ball Cap 4 2 Bottom Handlebar Weld 29R/L 1Pair Chain Cover 5 1 Left Crank Bracket M4 x 25mm Machine Screw 6 1 Right Crank Bracket 31R/L 1Pair Disc 7 1 Front Post Weld 32 3 M8 x 1.25P x 12mm Allen Head Screw 8 4 Pivot Cover 34 6 M8 x 15mm Allen Head Screw 9 8 M8 x 20mm Allen Head Bolt 35 5 Ø16 x Ø5 x 1.0mm Flat Washer 10 1 Handlebar 36 4 Axle Cover 11 1 SC1641 Monitor 37 4 Ø22.23 x Ø9.5 x 12.7mm Bushing M8 Spring Washer 38 4 Pedal Tube Sleeve 13 2 Ø22 x Ø8.4 x 2.0mm Flat Washer 39 2 Ø9.3 x 60.5mm Pedal Axle 14 8 M4 x 15mm Machine Screw 40R/L 1Pair Pedal RS Bearing 41 4 M6 x 35mm Hex Head Bolt 16 2 Ø40 Clip 42 4 M6 x 6mm Nut 17 2 Sleeve 43 2 M10 x 1.5P x 7mm Nylon Nut 18 2 M8 x 25mm Allen Head Screw 44 2 Rear Cap Handle Pulse Wire 45 2 Ø15.5 x 0.5mm Butterfly Washer 20 4 M3 x 15mm Round Head Screw 46 2 Ø19 x Ø8.4 x 2.0mm Axle Decoration 21 4 M6 x 1.0P x 16mm Allen Head Screw 47 2 Ø19 x Ø8.4 x 2.0mm Curved Washer 22R/L 2 Pairs Handlebar Decoration 48 6 Ø19 x Ø8.4 x 2.0mm Flat Washer 23 4 M4 x 25mm Round Head Screw 49 1 Ø16 x Ø10.3 x 1.0mm Flat Washer 24 2 Handle Pulse Cable Z Bearing 25 R/L 1Pair Handle Pulse

18 PARTS LIST NO Q TY Description 51 4 M5 x 12mm Across Head Screw 52 8 M5 x 15mm Machine Screw 53 2 M5 x 10mm Screw 54 1 M8 x 1.25P x 74mm Axle 55 2 Ø16 x Ø10.3 x 4.8mm Spacer Adjustable Washer Z Bearing 57 1 M8 x 1.25P x 70mm Shoulder Bolt 58 1 Ø18.5 x Ø10.5 x 11mm Bushing 59 2 R12Z Bearing 60 1 Ø26 x Ø19.84 x 23.6mm Bushing 61 1 M10 x 20mm Allen Head Screw 62 1 Sensor Fixation 63 7 M4 x 15mm Machine Screw 64 1 Ø254 x 45.4 Magnetic Fly Wheel J4 Belt 66 2 M8 x 8mm Nylon Nut 67 1 C Magnet 68 1 Idle Wheel Bracket 69 2 Ø14 x Ø10.5 x 1.5mm Flat Washer 70 1 Idle Wheel 71 1 Resistance Arm 72 1 Ø26 x 1.8mm Resistance Washer 73 1 M6 x 1.0P x 9mm Allen Head Bolt 74 1 ¼ x 1.0P x 44mm Allen Head bolt 75 1 M6 x 1.0P x 5mm Nut 76 1 Ø26 x Ø19.84 x 2.8mm Sleeve 77 4 M5 x 4.5mm Motor Nut NO Q TY Description 78 1 Motor Bracket 79 1 Motor 80 4 M5 x 12mm Screw 81 2 Transportation Wheel 82 4 M8*1.25P x 18mm Adjustable Knob 83 6 M5 x 20mm Machine Screw x 6.35 x 12mm Key 85 1 Ø12.57 x 4.57 Magnet 86 1 M5 x 15mm Screw mm Upper Cable mm Link Wire 89 1 Sensor 90 1 Ø25.4 x 1200mm Small Handlebar Foam Grip mm Link Wire 92 1 M4 x 10mm Machine Screw 93 2 Disc Cover 94 1 Ø28 x Ø6.2 x 2.5H Flat Washer 95 1 M6 x 18mm Head Screw Z Bearing 97 1 Ø15.7 x Ø10.2 x 28mm Spacer 98 7 Ø10 x Ø5.3 x 0.6 Lock Washer 99 2 M5 x 10mm Machine Screw M8 x 40mm Allen Head Screw Ø16 x Ø10.4 x 1.0mm Flat Washer mm Allen Wrench mm Allen Wrench Universal Wrench

19 11. EXPLODED DRAWING

20 12. TROJAN 1 YEAR WARRANTY The Manufacturer hereby provides a warranty to the original purchaser of this product ( the Consumer ) that this product will be free of manufacturing defects in materials and workmanship which under normal, personal, family or household use (commercial use expressly excluded) manifest themselves within the 1 year from the date of purchase. Exclusions The warranty does not include and will not be construed to cover products damaged as a result of disaster; misuse; commercial use; use not in accordance within the written instructions included with the product; abuse and/or any non-authorized modification of the product, incorrect installation of the product or normal wear and tear. All demo models carry a 3 month warranty. Waiver The warranty provided herein and the obligations of the Manufacturer in lieu of, and the Consumer, waives all other warranties, guarantees, conditions or liabilities, express or implied, arising by law or otherwise, including without limitation, any obligation of the Manufacturer in respect of any injury, loss or damage (direct, indirect or consequential) arising out of the use of, or inability to use this product and whether or not occasioned by the Manufacturer s negligence or any act or omission on its part

21 Proof of Purchase Any claim in terms of the warranty must be supported by a proof of purchase or a warranty number. Warranty numbers can be issued through contacting our call centre on 0861 Trojan ( ), or online at If such proof is not available, then notwithstanding anything to the contrary herein, the service agent s prevailing charges for services/repairs including call-out and/or spares will be payable by the Consumer upon collection or delivery of the repaired product. The Consumer does not need to return the product to the store. The Consumer shall phone the Trojan hotline on 0861 Trojan ( ) and the Manufacturer s authorized agent will at its discretion either repair the item at the Consumer s residence or collect and repair the item at their premises. During the warranty period the product may only be serviced and/or repaired by the Manufacturer s duly authorized agent(s). Masstores (Pty) Ltd 16 Peltier Drive, Sunninghill Sandton, Johannesburg, South Africa

22 13. TROJAN REPAIRS PROCEDURE 1. Procedure for repairs Should you experience any faults or breakdowns on your Trojan equipment, please adhere to the following procedure to have the fault rectified speedily and professionally. Do not return the product to the store* Call 0861 Trojan ( ) to log the faulty product (under warranty or out of warranty) The operator or technical advisor will try identify the fault, and will book a service team call out. The service team will endeavour to fix the problem in your home on an agreed date and time. Only if the fault cannot be repaired in the convenience of your home, will the service team take the faulty product back to the service centre. Items repaired in our service centre will be returned to your home on an agreed date and time. * Note: Should you live in an outlying area, it may be necessary to return the product to the store nearest to you. Our service operator will advise you of your repair procedure. 2. Cost of Repairs 2.1 Under warranty Any items still under warranty will be repaired free of charge, as long as it complies with the terms and conditions of the warranty. (refer to warranties section in this manual) Any items that need to be repaired that are NOT covered in the warranty will be for the consumer s expense. A quote for the repair/replacement of these items will be provided to the consumer for approval prior to repairs being conducted. 2.2 Out of Warranty Any items that need to be repaired once the warranty has expired will be for the consumer s expense including call out fees. A quote for the repair/replacement of these items will be provided to the consumer for approval prior to repairs being conducted