Pasin-Pin System. Further properties and characteristics of the Pasin-Pin

Transcription

1 Design by

2 Pasin-Pin System The Pasin-Pin System was developed to provide maximum flexibility in orthodontic therapy. The coupling possibility between implant and anchoring apparatus is not system bound and therefore offers the therapist maximum freedom of treatment. All forms of round and rectangular wires up to a dimension of.5 mm (0.046 inches) can be securely and stably fixed by means of a screwable connection. Pasin-Pin implants are manufactured of Grade 5 titanium (Ti6AL4V) and have a self drilling, self cutting thread. This material above all distinguishes itself through high tensile strength and biocompatibility. Especially for orthodontic implants with a small diameter this material has excellent mechanical properties and sturdiness. Further properties and characteristics of the Pasin-Pin The Pasin-Pin is available in different diameters and lengths for upper jaw and lower jaw. Length Diameter 8 mm 0 mm mm 4 mm mm Upper jaw Lower jaw.0 mm.6 mm The length specification of the Pasin-Pin results from the thread length and trans gingival portion. The head of the Pasin-Pin has a slot width of. mm (0.047 inches). The fixing of the coupling elements (square wires, round wires etc.) is performed by means of the screwable connection Pasin-Pin Fix Cap. In addition with non-slot filling wires, a light curing composite can be used to stabilise the wire. Rotation stability: With a disassembly of the orthodontic apparatus from the Pasin-Pin, respectively when releasing the screwed Pasin-Pin Fix Cap, through stabilisation of the apparatus the implant becomes rotation stable, and unintentional unscrewing of the implant is prevented. The small distance of only 0.4 mm between the trans gingival implant section and anchoring wire ensures low lever and shearing forces, which prevents loosening of the implant. The Pasin-Pin is supplied in sterile condition and guarantees an absolutely clean surface. The surface is free from organic and inorganic particles and toxins to prevent premature implant loss.

3 Pasin-Pin screw structure Slot width:. mm Height:.6 mm Spacing: 0.4 mm Trans gingival portion:. mm Length specification Pasin-Pin: 8, 0, and 4 mm Thread diameter:.6 mm,.0 mm,.3 mm Pasin-Pin diameter.6 mm Pasin-Pin diameter.0 mm Pasin-Pin diameter.3 mm Packaging unit Article No. Pasin-Pin.6 x 8 mm P608 Pasin-Pin.6 x 0 mm P60 Packaging unit Article No. Pasin-Pin.0 x 8 mm P008 Pasin-Pin.0 x 0 mm P00 Pasin-Pin.0 x mm P0 Pasin-Pin.0 x 4 mm P04 Packaging unit Article No. Pasin-Pin.3 x 8 mm P308 Pasin-Pin.3 x 0 mm P30 Pasin-Pin.3 x mm P3 Pasin-Pin,3 x 4 mm P34 Type of delivery: All implants are delivered sterile packed and are intended for single use. 3

4 overview Pasin-Pin System Produkt Packaging unit Verpackungseinheit Article No. Artikel-Nr. SD5 SD35 SD70 SD5G SD35G SD70G LA DR0 P-Screwdriver 5 mm P-Screwdriver 35 mm P-Screwdriver Long P-Screw Holder 5 mm P-Screw Holder 35 mm P-Screw Holder Long Pasin-Pin Laboratory Analog Drill.0 x 5 mm 4

5 overview Pasin-Pin System Packaging unit Bondable Connector Round Article No. BDC Screwdriver FC 0 mm Q4 Screwdriver FC 30 mm Q4L Screwdriver Hex 0 mm Q5 Screwdriver Hex 30 mm Q5L Q-Screw Handle Q6 Activation Lock with Screw AL0 Titanium Fixing Screw 0 TIFS NiTi-Spring 50 cn NS045 Spring 500 cn SS500 BYC M5 0 JH6 according to Dr. Banach for Activation Lock Bayonet Connector Round for lingual Sheath Pasin-Pin Fix Cap according to Dr. Banach Jet Hook 5

6 overview Pasin-Pin System Packaging unit Article No. Torque-Ratchet QX30 P-Sterilization-Box PSB Artikel-Nr. P-Casebox W&H Prosthodontic Screwdriver P-Screw Handle PSB IA-400 Packaging unit L3 Article No. Artikel-Nr. P-Plate T-Type P00 Artikel-Nr. P-Plate H-Type 6 Packaging unit Article No. P0

7 Distalizer-Set A incl. Pasin-Pins Article No. DKS0 x Pasin-Pin as desired x Pasin-Pin Fix Cap z.b. P00 M5 x P-Plate: T-Type oder H-Type as desired P00 P0 x Bayonet Connector x NiTi-Spring x Activation Lock with Screw NS045 AL0 BYC Article No. DKS5 Distalizer-Set B incl. Pasin-Pins x Pasin-Pin Fix Cap x Pasin-Pin as desired x NiTi-Spring z.b. P00 M5 x Activation Lock with Screw x Bayonet Connector NS045 AL0 BYC Pasin-Pin System Starter Set: Pasin-Pin System Starter Set Pasin-Pin System Starter Set: Article No. PPSS x P-Screwdriver 5 mm Artikel-Nr.: PPSS x P-Screw Holder 5 mm Q Screw Handle SD5G SD5 x Screwdriver Hex 0 mm x Screwdriver FC 0 mm Q6 Q5 Produkt Q4 Verpackungseinheit Packaging unit Article No. Artikel-Nr. PTMD Typodont model, (without implants, without apparatus) 7

8 Application examples Distalization appliance without plate with a. mm round wire Implant supported RME Activated distalization mechanism Detail view of the distalistation mechanism Implant anchored TMA spring for impacted canine teeth Lower jaw appliance Lower jaw appliance as distalization appliance 8 Lower jaw appliance as mesialization appliance

9 Application examples T-Plate appliance T-Plate appliance with a Bondable Connector H-Plate appliance M4 appliance without plate with a. round wire Detail view of the TPA Spring Jet TPA Spring Jet 9

10 Description and intended use Pasin-Pin Fix Cap P-Screw Holder P-Screwdriver Pasin-Pin Laboratory Analog Article No. SD5G, SD35G, SD70G The screw holder is available in different lengths. This instrument ensures a secure, sterile removal from the packaging, as well as a secure hold during the implantation. Article No. SD5, SD35, SD70 The screwdriver is available in different lengths. This instrument serves to align the implant, respectively the slot a er the insertion. In contrast to the screw holder the screwdriver thereby does not cause any friction, respectively pulling forces during the removal of the implant screw. Article No. LA A er the implant insertion a impression of the jaw can be performed by means of Alginate, respectively silicone to obtain a negative form of the clinical situation. Thereby the Pasin-Pin is positioned laboratory analog in the impression. Drill.0 x 5 mm Article No. DR0 Pilotvorbohrer P-Screw Handle Article No. L3 Screwdriver handle for screwdriver SD70 and SD70G for a manual insertion of the implants Q Screw Handle Article No. Q6 Screwdriver handle for all dental handpiece screwdriver Screwdriver Hex 0 mm Article No. Q5L Screwdriver for the Titanium Fixing Screw, respectively Activation Lock Screwdriver Hex 30 mm Article No. Q5 Replacement screws for Activation Lock with Screw Screwdriver FC 0 mm Article No. Q4 Screwdriver handle for the die Pasin-Pin Fixing Cap Screwdriver FC 30 mm Article No. Q4L Screwdriver handle for the Pasin-Pin Fixing Cap Titanium Fixing Screw Article No. TIFS Replacement screws for Activation Lock with Screw Torque-Ratchet 0 Article No. M5 Screw nut for the Pasin-Pin Article No. QX30 Torque ratchet, support instrument to insert the implant in the jaw with a certain maximum torque

11 Description and intended use For the application of the following system components, see typodont examples: P-Plate T-Type P-Plate H-Type Activation Lock with Screw NiTi-Spring 50 cn Spring 500 cn Bondable Connector Round Bayonet Connector Round Symbol explanation of the Pasin-Pin screw name Size specification: Diameter and length European Conformity with identification number of the Notified Body Do not use if package is damaged Sterilization by irradiation Prescription, application only with medical prescription Consult instruction for use Batch number Catalog number Expires Manufacturer Manufacturing date Do not reuse DataMatrix-Code Adhesive label for record card: The illustrated products are medical devices according to directive 93/4/EG.

12 0483 Edited 0-PIN-09 0/06 Content controlled, updates and corrections are subject to change without prior notice Distributor: Germany +49 (0) gacde.info@dentsply.com Switzerland +4 (0) gacch.info@dentsply.com Austria +43 (0) planer.office@dentsply.com Manufactured by: Trinon Titanium GmbH, Augartenstr., D-7637 Karlsruhe, Germany 06 BBC-Orthotec GmbH. All rights reserved.