LIPOSUCTION CANNULAS & ACCESSORIES

Transcription

1 LIPOSUCTION CANNULAS & ACCESSORIES

2 Cleaning & Serilization Instructions Description Surgical instruments are designed to perform specific functions such as cutting, grasping, clamping, dissecting, probing, retracting, draining, aspirating, suturing, or ligating. Surgical instruments may also be used to facilitate the insertion of surgical implants. Contraindication Instruments should not be used for anything other than their intended use. Warning Devices shall be used in accordance with these instructions for use. Read all sections of this insert prior to use. Improper use of this device may cause serious injury. In addition, imporper care and maintenance of the device may render the device non-sterile prior to patient use and cause a serious injury to the patient or health care provider. Caution Surgical instruments are supplied non-sterile, unless otherwise noted and must be cleaned, lubricated (if required) and sterilized prior to use according to hospital protocol and procedures outlined in this document. Inappropriate use of instruments may result in patient injury, damaged or broken instruments. Proper cleaning, handling, sterilization and standard routine maintenance (such as sharpening, lubrication if applicable) will ensure that the instruments perform as intended and will extend their useful life. Delicate surgical/dental instruments require special handling to prevent damaging the tips. Use caution during cleaning and sterilization. Do not expose instruments to phenols or iodophors. Do not use dry heat sterilization for aluminum or plastic made, black coated or ebonized instruments. Do not apply excessive stress or strain at joints; misuse will result in mis alignment or cracks at the box locks or jaws. Rongeurs and bone cutting forceps should only be used to cut bone, never wire or pin. Do not twist or apply excessive stress during use. Wear appropriate protective gloves, eyewear and clothing when handling biologically contaminated instruments. Instruments manufactured from different metals or with special coating, should be processed separately to avoid electrolytic action between the different metals. Before use, inspect the instruments for possible damage, wear or non-func tioning parts. Carefully inspect the critical, inaccessible areas, joints and all movable parts. Damaged or defective instruments should not be used or processed. Care And Handling 1.Precleaning: Keep instruments moist and do not allow blood and/or bodily fluids to dry on the instruments. Remove gross contaminants with steady stream of lukewarm/cool water (below 110 F/43 C). Rinse each instrument thoroughly. Do not use saline or chlorinated solutions. Open jaws of hinged instruments for cleaning. Give special attention to joints and serrations. Instruments having more than one part or piece must be disassembled (if possible) to expose all surfaces to the cleaning process. Retain all parts to facilitate reassembly. Separate sharp and delicate surgical instruments. Avoid processing instruments of different metallic composition together. Keep ebonized instruments separate from other stainless steel instruments to avoid scratches to and removal of the ebonized coating. 2.Rinse: Rinse instruments thoroughly under warm distilled or demineralized water. 3.Cleaning: Cleaning Precautions: If appropriate, disassemble surgical instruments prior to cleaning and sterilization. Do not soak instruments in hot water, alcohol, disinfectants or antiseptics to avoid coagulation of mucus, blood or other body fluids. Do not exceed two hours soaking in any solution. Do not use steel wool, wire brushes, pipe cleaners or abrasive detergents to remove soil as these will damage the instrument and lead to corrosion. Microsurgical, plated and delicate instruments should be cleaned manually and should not be processed in an ultrasonic cleaner. Carefully protect the tips of delicate microsurgical instruments throughout the entire cleaning and sterilization process. To preserve the surface coating of ebonized instruments, keep ebonized instruments separate from other instruments and avoid mechanical cleaning and abrasive cleaners as these processes can scratch the surface and remove the surface coating. Color anodized aluminum instruments may lose their color through the use of conventional, mechanical treatment processes. A. Manual Cleaning: To prevent formation of biofilm, cleaning should occur as soon as possible after instrumentation is used. Choose a cleaning solution appropriate for surgical/dental instruments and follow manufacturer s instructions for use. The use of neutral ph detergents is recommended to avoid corrosion, pitting and breakage. Using a small, clean hand-held brush, remove soil from all surfaces ofi nstrument while fully immersed in solution B. Ultrasonic And Mechanical Cleaning For ultrasonic cleaning, follow manufacturer s specifications for water level, concentration levels of cleaning agent and temperature. Use an ultrasonic cleaner to remove soil from hard to reach surfaces such as grooves, crevices and moving parts after gross soil has been removed. Open or disassemble instruments as appropriate. When using mechanical washer, make sure all instruments stay properly in place and do not touch or overlap each other. Do not allow ebonized instruments to come in contact with each other or other instruments. Always follow the manufacturer s specifications for automatic washer-sterilizers and use a free-rinsing, low-sudsing detergent with a neutral ph ( ). Due to variations in water quality, the type of detergent and its concentration may require adjustment for optimal cleaning. 4.Rinse And Dry: Rinse all instruments thoroughly with distilled, pyrogen-free water to remove all traces of debris and cleansing agents. Make sure all internal lumens and ratchets are thoroughly rinsed. Instruments must be thoroughly dried and all residual moisture must be removed before they are stored. Use a soft, absorbent towel/cloth to dry external surfaces. Compressed air may be used to aid the drying process. 5.Lubricate: The use of a water soluble instrument lubricant that is compatible with the method of sterilization to be used is recommended before instruments are sterilized. After thoroughly cleaning the instruments, proper application of lubricants to all joints and movable mating surfaces will keep them moving freely and aid in protecting surface from mineral deposits. Proper lubrication is required for all instruments, regardless of surface coatings. Note that ultrasonic cleaners remove all lubrication; therefore, this maintenance procedure should be done routinely after ultrasonic cleaning and before sterilization. If following the lubricating procedure, do not rinse after this step.

3 Cleaning & Serilization Instructions 6.Sterilization: All devices must be processed in the completely open position (i.e. flushports, jaws, etc.) to allow sterilant contact of all surfaces. All devices with concave surfaces shall be configured so that water pooling does not occur. Sterilization Method Temperature Exposure Time Dry Time High Vacuum Steam (Pre-vacuum) Wrapped 270 F (132 C) 3 minutes mini- N/A mum High Vacuum Steam (Pre-vacuum) Unwrapped in containers 4 minutes mini- 20 Perforated stacked/ 270 F (132 C) mum minutes unstacked Solid unstacked Gravity Steam Unwrapped in containers 250 F (121 C) 45 minutes 20 minutes Perforated unstacked Gravity Steam Wrapped in cassettes Ethylene Oxide (EtO) Unwrapped in containers Perforated unstacked Solid unstacked 250 F (121 C) 30 minutes 20 minutes 60 minutes (minimum) 131 F (55 C) Concentration: 725 mg/l Humidity: 70% Aerationtime: 8 hours minimum A. Reason you wish to return the goods; B. Quantity, description, product number; C. Date of Receipt of Order; D. Customer s Purchase Order and the Carnegie Surgical invoice number; E. All instruments that have been used must be cleaned and sterilized prior to shipment. 3.Shipment must be returned prepaid by Customer. Freight collect shipments will not be accepted. 4.If Customer intends to return equipment ordered in error, the following restocking charges and terms will apply: A. 25% within 90 days from date of shipment; B. Goods must be returned unused, in the original carton, and in marketable condition; C. Refurbishing and replacement charges will be added to the restocking charges for damaged or missing items; D. No return after 90 days; E. No refund on sterile, single-use disposable products. F. No refund will be made on customized instruments. Warranty Surgical stainless steel instruments are warranted for a period of two (2) years from the original date of purchase. Surgical single patient use products are warranted for 90 days against defects in work-manship or materials that are discovered prior to initial use or expiration. If instruments should fail as the result of a defect in materials or workmanship, Surgical is committed to take steps it believes are necessary to rectify the problem. These steps may include, but are not limited to, repair, replacement or supplying an alternative instrument. This warranty does not cover general maintenance such as cleaning and sharpening services required as a result of normal use. It does not include damage that is caused by misuse, improper care, the use of improper chemicals or cleaning methods, negligence, modification or unauthorized service by non-surgical personnel, or normal wear. Damage to insulating coatings on electro-surgical instruments is excluded from the terms of this warranty. The sole remedy under this warranty shall be repair or replacement as provided above at the sole discretion of Spiral Surgical Instruments. In no event will Spiral Surgical be liable for any damages arising out of loss of use, or any other incidental or consequential damages. The foregoing limited warranty is in lieu of any other warranty with respect to Spiral Surgical products. Spiral Surgical grants no other warranty, express or implied 7.Storage After sterilization, devices must remain in sterilization packaging and be stored in a clean, dry envionment. Returned Goods Policy & Warranty Returned Goods Policy 1.Goods will be accepted for return for the following reasons and must be accompanied by a RGA. A. If shipment was made without Customer s authorization; B. If incorrect items were shipped; C. If defective items were shipped; D. If defective goods are covered by the standard warranty; E. If the goods were sent on evaluation basis. 2.To return goods, contact a Customer Service Representative by telephone for an RGA (Returned Goods Authorization) number. The RGA # must also be clearly indicated on the outside of the returned package. Please have the following information:

4 Table of Contents Liposuction Cannulas In ltration Cannulas 5-7 General Suction Cannulas 8-16 Injecting Cannulas SUPOR Handle Power Cannulas TOOMEY Hub Cannulas 26 Accessories Our Specialized Sets 33

5 Luer Lock Connector: The universal Luer Lock hub enables cannula to attach directly with any Luer Lock Syringe. SUPOR Lock Connector: A modi cation to general Luer Lock hub which is more powerful, more stable,leak proof, free from instability and contamination. Ti. Coated With Cell Friendly Titanium Nitride coating throughout the pipe Standard With regular Stainless Steel pipes with polish nish. 60cc Tommey Connector: An ideal hub style for surgeons why love to handle large fat volumes. This hub style connect cannula to a 60cc Tommey to syringe. SUPOR Handle An ideal power handle style for surgeons why love to handle large fat volumes. Can be used with any aspiration machine via a tube at tubing/connecting end.. 4

6 INFILTRATION CANNULAS s In ltration Cannulas are designed for safe and ef cient delivery of tumescent solution. The spiral micro holes on cannula ensure and even distribution of local anesthetic which results in a longer anesthetic effects this less painful and more pleasent liposuction experience for patient. 5

7 INFILTRATION CANNULAS Infiltrator Cannula Straight This cannula is used specifically for the infusion of tumescent solu on. The configura on of the ports allows even distribu on of the fluid. 2.0mm X 12cm, 18-Holes 2.0mm X 15cm, 18-Holes 2.0mm X 20cm, 18-Holes 2.5mm X 20cm, 18-Holes 2.5mm X 20cm, 22-Holes, 22-Holes, 22-Holes 4.0mm X 25cm, 22-Holes 4.0mm X 30cm, 30-Holes SUPOR T T T T T T T T T T T T T T T T T T Infiltrator Cannula Bayone The bayonet shaped handles allow an easier manipulation STANDARD Ti. Coated SUPOR STANDARD Ti. Coated, 22-Holes, 22-Holes 3.0mm X 30cm, 30-Holes 4.0mm X 20cm, 22-Holes 4.0mm X 25cm, 22-Holes 4.0mm X 30cm, 30-Holes T T T T T T T T T T T T 6

8 INFILTRATION CANNULAS In ltrator Cannulas Angled This cannula is used speci cally for the infusion of tumescent solution. The con guration of the ports allows even distribution of the uid. 2.5mm X 20cm, 18-Holes, 18-Holes, 22-Holes 3.0mm X 30cm, 22-Holes 4.0mm X 25cm, 22-Holes 4.0mm X 30cm, 18-Holes SUPOR T T T T T T T T T T T T Facelift In ltration Cannula This cannula is used speci cally for the infusion of tumescent solution. The con guration of the ports allows even distribution of the uid. SUPOR 2.0mm X 15cm T T 7

9 GENERAL SUCTION CANNULA s General suction cannula are ideal tool for large volume Harvesting with ease perfection. These cannulas are designed to facilitate you to get perfectly designed goals in minimum time. 8

10 GENERAL SUCTION CANNULAS Spiral Three Port Harvesting Cannula Spiral three port design on this Cell Friendly liposuction cannula is effective for multi-plane adipose tissue harvesting. 1.5mm X 10cm 1.5mm X 12cm 2.0mm X 10cm 2.0mm X 15cm 2.5mm X 15cm 2.5mm X 20cm 3.0mm X 15cm SUPOR T T T T T T T T T T T T T T T T T T Spiral Six Port harvesting Cannula Six port spiral con guration on this Cell Friendly liposuction cannula harvests maximum tissue volume in minimal time. 2.5mm X 15cm 2.5mm X 25cm 3.0mm X 15cm SUPOR T T T T T T T T 9

11 GENERAL SUCTION CANNULAS Microport Aggressive Harvester Cannula, Beveled Ports A multiport harvester with elevated 1mm microports which yield small enough aliquots of fat tissue to allow for easy and smooth injection with the Spiral s 0.7, 0.9 and 1.2mm injectors. 2.5mm X 20cm SUPOR T T T T T T Multi Hole Harvester Cannula With Beveled Ports A sophisticated, precision-designed harvester that is truly Patient Friendly. The ports are machined with alternating 60 degree cutting edges. This unique design is less traumatic than other multi-port harvester. 2.5mm X 15cm 2.5mm X 20cm SUPOR T T T T T T T T Microport Aggressive Harvester Cannula A multiport harvester with elevated 1mm microports which yield small enough aliquots of fat tissue to allow for easy and smooth injection with the Spiral s 0.7, 0.9 and 1.2mm injectors. 2.5mm X 20cm SUPOR T T T T T T 10

12 GENERAL SUCTION CANNULAS Single Port Standard Liposuction Cannula This is the most common cell friendly cannula design for soft tissue removal. The single port is located 180 degrees from the thumb rest on the hub. 1.7mm X 12cm 2.0mm X 15cm 2.5mm X 15cm 2.5mm X 20cm 3.0mm X 15cm SUPOR T T T T T T T T T T T T T T Two ports Standard Liposuction Cannula This is the most common cell friendly cannula design for soft tissue removal. The double port is located 180 degrees from the thumb rest on the hub. 1.7mm X 12cm 2.0mm X 15cm 2.5mm X 15cm 2.5mm X 20cm 3.0mm X 15cm SUPOR T T T T T T T T T T T T T T 11

13 GENERAL SUCTION CANNULAS Three Ports Harvesting Cannula This is the most common cell friendly cannula design for soft tissue removal. The triple port is located 180 degrees from the thumb rest on the hub. 1.5mm X 12cm 2.0mm X 15cm 2.5mm X 15cm 2.5mm X 20cm 3.0mm X 15cm SUPOR T T T T T T T T T T T T T T Cobra Style Two ports Cannula More aggressive than the Standard, Pyramid or Mercedes, this cannula has a tapered tip with two ports and works effectively within dense brous tissue. 2.0mm X 15cm 2.5mm X 15cm 2.5mm X 20cm 3.0mm X 15cm SUPOR T T T T T T T T T T T T 12

14 GENERAL SUCTION CANNULAS Mercedes Three Ports Liposuction Cannula This circumferential three port con guration cell friendly liposuction cannula is effective for multi-plane soft tissue harvesting. 2.0mm X 15cm 2.5mm X 15cm 2.5mm X 20cm 3.0mm X 15cm SUPOR T T T T T T T T T T T T Double Mercedes Six Ports Liposuction Cannula This circumferential three port con guration cell friendly liposuction cannula is effective for multi-plane soft tissue harvesting. 2.0mm X 15cm 2.5mm X 15cm 2.5mm X 20cm 3.0mm X 15cm SUPOR T T T T T T T T T T T T 13

15 GENERAL SUCTION CANNULAS Three Port Pyramid Style Cannula This commonly used design has three ports located 180 degrees from the thumb print. It is a slightly more aggressive cannula than the Standard during liposuction procedures. 2.0mm X 15cm 2.5mm X 15cm 2.5mm X 20cm 3.0mm X 15cm SUPOR T T T T T T T T T T T T Reverse Pyramid Cannula This commonly used design has three ports located 180 degrees from the thumb print. It is a slightly more aggressive cannula than the Standard during liposuction procedures. 2.0mm X 15cm 2.5mm X 15cm 2.5mm X 20cm 3.0mm X 15cm SUPOR T T T T T T T T T T T T 14

16 GENERAL SUCTION CANNULAS V-Shaped Dissecting Cannula 1.6mm X 7cm 2.0mm X 15cm 2.5mm X 15cm 2.5mm X 20cm 3.0mm X 15cm SUPOR T T T T T T T T T T T T T T Single Basket Cannula The Cell Friendly Basket Cannula is a versatile liposculpting tool. It can operate as an equalizer with vacuum or without vacuum to treat adipose tissue and skin irregularities in revision liposuction and fat transfer procedures. 4.0mm X 20cm SUPOR T T T T StevensStyleCannula 3.0mm X 15cm SUPOR T T T T T T 15

17 GENERAL SUCTION CANNULAS Flap Dissector Cannula With Single Port The Flap is primarily used as an undermining dissector, and in smaller diameters, for facial tissue removal. The Flap Cannula in a 2.0mm diameter is very useful for undermining the nasolabial fold prior to autologous tissue injections, as well as for tissue removal in this anatomic area. 2.0mm X 15cm 2.5mm X 15cm 2.5mm X 20cm 3.0mm X 15cm SUPOR T T T T T T T T T T T T 16

18 INJECTING CANNULA s Injecting cannulas are simply comes in ideal tips, can be sued for fat grafting at face, neck, breast and buttock area. Available in both luer-lock and SUPOR Luer-Lock tting. 17

19 INJECTING CANNULAS Blunt Tip Single Hole Injecting Cannula Rounded blunt tip design passes through soft tissue easily without the trauma or potential problems of sharp instruments. 0.7mm X 4.5cm 0.9mm X 5.5cm 1.2mm X 7.5cm 1.4mm X 12cm - Curved 1.4mm X 15cm - Curved 1.4mm X 20cm - Curved 1.6mm X 12cm - Curved 1.6mm X 15cm - Curved 1.6mm X 20cm - Curved SUPOR T T T T T T T T T T T T T T T T T T Blunt Tip Small Single Hole Injecting Cannula Open and more pointed blunt tip is very effective in dense and brous tissue. 0.7mm X 4.5cm 0.9mm X 5.5cm 1.2mm X 7.5cm SUPOR T T T T T T 18

20 INJECTING CANNULAS Blunt Spoon Tip Injecting Cannula Blunt spoon-shaped tip designed with a larger port for rapid injection of larger volumes, best for breast and buttock area. 1.4mm X 7.5cm 1.4mm X 10cm 1.6mm X 10cm 1.6mm X 12cm 2.0mm X 15cm 2.0mm X 20cm 2.5mm X 15cm 2.5mm X 20cm 3.0mm X 15cm 1.4mm X 12cm - Curved 1.4mm X 15cm - Curved 1.6mm X 12cm - Curved 1.6mm X 15cm - Curved 1.6mm X 20cm - Curved SUPOR T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T 19

21 INJECTING CANNULAS Sharp Extractor/Injector This tip works well for needle extraction of soft tissue and as a soft tissue reinjection needle. 0.5mm X 4cm 0.7mm X 5cm 0.9mm X 7cm 1.0mm X 10cm 1.2mm X 10cm 1.5mm X 10cm 1.5mm X 12cm 1.8mm X 12cm 1.8mm X 15cm 2.0mm X 15cm 2.0mm X 20cm STANDARD Ti. Coated T T T T T T T T T T T SUPOR STANDARD Ti. Coated T T T T T T T T T T T Blunt Extractor/Injector This tip works well for needle extraction of soft tissue and as a soft tissue reinjection needle. 0.5mm X 4cm 0.7mm X 5cm 0.9mm X 7cm 1.0mm X 10cm 1.2mm X 10cm 1.5mm X 10cm 1.5mm X 12cm 1.8mm X 12cm 1.8mm X 15cm 2.0mm X 15cm 2.0mm X 20cm STANDARD Ti. Coated T T T T T T T T T T T SUPOR STANDARD Ti. Coated T T T T T T T T T T T 20

22 SUPOR HANDLE ONE PIECE CANNULAS s SUPOR HANDLE one piece xed cannulas are best for the Heavy Liposuction, easily adaptable with aspiration machine via a tube. Cannulas comes with Cell Friendly special TITANIUM NITRIDE coating throughout the pipe length. 21

23 SUPOR HANDLE CANNULAS Single Mercedes Three Ports Cannula This circumferential three port con guration cell friendly liposuction cannula is effective for multi-plane soft tissue harvesting mm X 35cm mm X 25cm mm X 30cm mm X 30cm mm X 35cm mm X 35cm mm X 20cm mm X 25cm mm X 25cm mm X 30cm mm X 30cm mm X 35cm Double Mercedes Six Ports Cannula This circumferential three port con guration cell friendly liposuction cannula is effective for multi-plane soft tissue harvesting mm X 35cm mm X 25cm mm X 30cm mm X 30cm mm X 35cm mm X 35cm mm X 20cm mm X 25cm mm X 25cm mm X 30cm mm X 30cm mm X 35cm

24 SUPOR HANDLE CANNULAS Single Basket Liposuction Cannula The Cell Friendly Basket Cannula is a versatile liposculpting tool. It can operate as an equalizer with vacuum or without vacuum to treat adipose tissue and skin irregularities in revision liposuction and fat transfer procedures mm X 35cm mm X 25cm mm X 30cm mm X 30cm mm X 35cm mm X 35cm mm X 20cm mm X 25cm mm X 25cm mm X 30cm mm X 30cm mm X 35cm Double Basket Liposuction Cannula The Cell Friendly Basket Cannula is a versatile liposculpting tool. It can operate as an equalizer with vacuum or without vacuum to treat adipose tissue and skin irregularities in revision liposuction and fat transfer procedures mm X 35cm mm X 25cm mm X 30cm mm X 30cm mm X 35cm mm X 35cm mm X 20cm mm X 25cm mm X 25cm mm X 30cm mm X 30cm mm X 35cm

25 SUPOR HANDLE CANNULAS Pyramid Style Three Ports Cannula This Cell Friendly commonly used design has three ports located 180 degrees from the thumb print. It is a slightly more aggressive cannula than the Standard during liposuction procedures mm X 35cm mm X 25cm mm X 30cm mm X 30cm mm X 35cm mm X 35cm mm X 20cm mm X 25cm mm X 25cm mm X 30cm mm X 30cm mm X 35cm Accelerator Three Port Cannula This Cell Friendly commonly used design has three ports located 180 degrees from the thumb print actually a reverse shape of pyramid style cannulas with pointed tip. It is a slightly more aggressive cannula than the Standard during liposuction procedures mm X 35cm mm X 25cm mm X 30cm mm X 30cm mm X 35cm mm X 35cm mm X 20cm mm X 25cm mm X 25cm mm X 30cm mm X 30cm mm X 35cm

26 SUPOR HANDLE CANNULAS Single Port Standard Cannula This is the most common cell friendly cannula design for soft tissue removal. The single port is located 180 degrees from the thumb rest on the hub mm X 30cm mm X 35cm mm X 30cm mm X 25cm mm X 35cm mm X 30cm mm X 25cm mm X 35cm

27 TOOMEY HUB CANNULAS TOOMEY hub Macro Injecting Cannula s Cell Friendly single hole toomey injecting cannulas are best for fat injecting in volume usually in buttocks reshaping, connects perfectly Toomey Monojet Syringe. * Longer hub ts better over toomey 50/60cc syringes, gives better grip over syringe barrel * Ergonomic raised edge on connector is to avoid slippage due to oily hands during procedure (while surgeons need to change the cannulas again and again) mm X 30cm mm X 35cm mm X 30cm mm X 25cm mm X 35cm mm X 30cm mm X 25cm mm X 35cm Instruments 4.0mm X 30cm 26

28 LIPOSUCTION ACCESSORIES 27

29 ACCESSORIES HANDLES FOR LUER/SUPOR-LUER LOCK CANNULAS Style - 1 Instruments With Interrup ng Hole and a Luer Lock connector at Tubing End Instruments Without Interrup ng Hole and a Luer Lock connector at Tubing End Style - 2 Instruments Standard Handle With Interrup ng Hole Instruments Standard Handle Without Interrup ng Hole

30 ACCESSORIES NanoTransfer Adapter Nano Fat Filtration Unit is highly specialized closed system which is made up of Anodised Aluminum Alloy. The system allows surgeon to get the best quality regraftable adipose tissue which can be used with 0.7mm or 0.9mm injector cannulas Nano Transfer Adapter Anaerobic Transfer Adapters Anaerobic transfers are used to prepare and transfer extracted tissue for reinjection 1.2mm 1.4mm 2.4mm Pocar The Pocar is a percutaneous punch that is used to make a circumferential incision prior to in ltration and tissue extraction. It is designed to maintain a tight seal while minimizing scarring

31 ACCESSORIES Anaerobic Transfer With Stand Anaerobic transfers are used to prepare and transfer extracted tissue for re-injection. The Decant Stand design also allows for a natural gravity decant of extracted tissue. Anaerobic Transfer With Stand Johnie U-Locks holds the plunger under vacuum for easy syringe harvesting Toomey 50/60cc Syringes Syringe Tip Caps Keep the contents of your syringe sealed. Fully Autoclavable and reusable. For Single unit For Pack of 10 units Syringe Stop locks These syringe snap locks t into the plunger anges of the syringe. When the plunger is pulled out the lock snaps open on the barrel lip thus For 10cc Syringes For 20cc Syringes For 50/60cc Syringes

32 ACCESSORIES Universal Injecting Gun The Power Injector allows the surgeon to re-inject soft tissue through large or small diameter injectors with very little effort and maximum control. The Universal Power Injector will hold a 3cc, 10cc or a 20cc BD syringe or a BD syringe or 60cc Monoject syringe. For 10cc Syringes For 20cc Syringes Universal for 10 and 20cc Syringes For 3.0cc Syringes (Micro Inejec ng) Fat Syringe The fat syringe is an ideal tool to help surgeons for manual liposuction by creating negative pressure. For 3cc Syringes For 5cc Syringes For 10cc Syringes For 20cc Syringes For 50cc Syringes

33 ACCESSORIES Storage And Sterilization Boxes For Small Cannulas 10 X 6 X 1.5 With Silicon Ma For Large Cannulas 20 X 8 X 1.5 With Silicon Ma Spare Silicon Ma 10 X 6 X 1.5 Spare Silicon Ma 20 X 8 X Syringe Decanting/Holding Stand For 3cc Syringes only For 5cc Syringes only For 10cc Syringes only For 20cc Syringes only For 50/60cc Syringes only Universal stand (Picture)*

34 SPECIALIZED SUGGESTED SETS s cannulas sets are designed to enhance surgeons capabilities for various procedures. Cell friendly Titanium Nitride coated SUPOR luerlock connector are combined to serve you better. 33

35 CANNULAS SUGGESTED SETS Fat transfer set for face Set Includes 01. In ltrator Cannulas, Straight, SUPOR Luer Lock 2.0mm x 20cm [01 piece] 02. Multi Hole Harvester Cannula With Beveled 2.5mm x 20cm [01 Piece] 03. Blunt Tip Small Single Hole Injecting Cannula, SUPOR Luer-Lock 0.7mm x 4.5cm [01 Piece] 04. Blunt Tip Small Single Hole Injecting Cannula, SUPOR Luer-Lock 0.9mm x 5.5cm [01 Piece] 05. Blunt Tip Small Single Hole Injecting Cannula, SUPOR Luer-Lock 1.2mm x 7.5cm [01 Piece] 06. Decant Stand & Anaerobic Transfer Luer to Luer [01 Piece] 07. Syringe Stop lock for 10cc Syringes [01 Piece] 08. Syringe Stop Lock for 20cc Syringes [01 Piece] Fat transfer set for breasts Set Includes: 01. In ltrator Cannulas, Straight, SUPOR Luer Lock 2.0mm x 20cm [01 piece] 02. Microport Aggressive Harvestor Cannulas With Beveled Ports, SUPOR Luer Lock, [01 Piece] 03. Spoon Tip Injecting Cannula, SUPOR Luer Lock, 1.6mm X 10cm [01 Piece] 04. Spoon Tip Injecting Cannula, SUPOR Luer Lock, 2.0mm X 15cm [01 Piece] 05. Spoon Tip Injecting Cannula, SUPOR Luer Lock, 2.5mm X 20cm [01 Piece] 06. Syringe Stop Lock for 20cc Syringe [01 Piece] 07. Syringe Stop Lock for 50cc Syringe [01 Piece] 08. Decant Stand & Anaerobic Transfer Luer to Luer [01 Piece]

36 CANNULAS SUGGESTED SETS Cannulas Set For Buttock Reshaping And Body Contouring 01. Single Mercedes SUPOR Handle Cannulas, 3.5mm X 20cm [01 Piece] 02. Single Mercedes SUPOR Handle Cannulas, 4.0mm X 25cm [01 Piece] 03. Spoon Tip Injecting Cannula, SUPOR Luer-Lock, 1.6mm X 10cm [01 Piece] 04. Spoon Tip Injecting Cannula, SUPOR Luer-Lock, 2.5mm X 15cm [01 Piece] 05. Spoon Tip Injecting Cannula, SUPOR Luer-Lock, 3.0mm X 15cm [01 Piece] 06. V-Dissector, SUPOR Luer-Lock, 1.6mm X 10cm [01 Piece] 07. V-Dissector, SUPOR Luer-Lock, 3.0mm X 15cm [01 Piece]

37