HENKEL LOCTITE CORPORATION Date of Preparation: 07/26/01. MATERIAL SAFETY DATA SHEET Page 01 of 06

Size: px

Start display at page:

Download "HENKEL LOCTITE CORPORATION Date of Preparation: 07/26/01. MATERIAL SAFETY DATA SHEET Page 01 of 06"

Tracy Harris
5 years ago
Views:

1 MATERIAL SAFETY DATA SEET Page 01 of PRODUCT AND COMPANY IDENTIFICATION Product name: FIXMASTER ALUMINUM PUTTY ARDENER Item number: Part of kit: Product Type: Epoxy ardener Company Address: Loctite Corporation 1001 Trout Brook Crossing Rocky ill, Connecticut Medical Emergency Number: (860) Fax: (860) COMPOSITION/INFORMATION ON INGREDIENTS Ingredient CAS Number % Exposure Limits Triethylenetetramine Not established. Amine resin Not established. N-(2-Aminoethyl)piperazin Not established. 4,4'-Isopropylidenediphen TWA: 10 mg/m3 Other Nonylphenol Not established. Benzyl alcohol Not established. Glyceryl Not established. poly(oxypropylene) triamine Silica, amorphous, fumed, TWA: 6 mg/m3 OSA crystalline-free TWA: 3 mg/m3 ACGI respirable TWA: 10 mg/m3 ACGI TWA: 6 mg/m3 NIOS Aluminum flake TWA: 10 mg/m3 ACGI TWA: 5 mg/m3 OSA respirable TWA: 15 mg/m3 OSA total 3. AZARDS IDENTIFICATION ****EMERGENCY OVERVIEW**** PYSICAL STATE:Paste. COLOR:Silvery. ODOR: Slight Ammonia-like. DANGER! CAUSES EYE AND SKIN BURNS. MAY CAUSE ALLERGIC SKIN AND RESPIRATORY REACTION. MAY BE ARMFUL IF SWALLOWED OR ABSORBED TROUG SKIN. MAY CAUSE RESPIRATORY TRACT IRRITATION Potential ealth Effects Eye: Causes eye burns. Blurred vision. Excess tearing. Pain and discomfort. Tissue damage. May cause blindness. May cause necrosis or permanent injury. Liquid, vapors and mist of this product are irritating and can cause tearing, redding and swelling of the eyes, possibly accompanied by a stinging sensation. Corneal edema may give rise to a perception of "blue haze" or "fog" around lights.

2 MATERIAL SAFETY DATA SEET Page 02 of 06 FIXMASTER ALUMINUM PUTTY ARDE Skin: May be harmful if absorbed through skin. Allergic skin reaction. Itching. Causes skin burns. Pain and discomfort. Tissue damage. May cause necrosis or permanent injury. Ingestion: May be harmful if swallowed. Irritating and corrosive to mouth, stomach, and digestive tract. Aspiration hazard if swallowed. Material can enter lungs especially if swallowed causing damage such as chemical pneumonia. Inhalation: Allergic respiratory reaction. Sensitization. Moderate respiratory tract irritation. Shortness of breath. Coughing. Conditions Aggravated by Exposure: Respiratory disorders. Skin disorders. Eye disorders. Asthma. Chronic: Detailed information provided in section FIRST AID MEASURES Eye: Skin: Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention. Immediately flush skin with plenty of water (using soap, if available) for at least 15 minutes while removing contaminated clothing and shoes. Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and shoes. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention. Ingestion: Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention. Inhalation: Remove to fresh air. If symptoms develop and persist, get medical attention. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Note to Physician: 5. FIRE FIGTING MEASURES Flash Point: CLOSED CUP : igher than 200.F (93.3.C). (estimated) Extinguishing Media: In case of fire, use water spray (fog), foam, dry chemicals, or CO2.

3 MATERIAL SAFETY DATA SEET Page 03 of 06 FIXMASTER ALUMINUM PUTTY ARDE Flammable Limits: Special Fire Fighting Procedures: Fire fighters should wear positive pressure self-contained breathing apparatus (SCBA) and full turnout gear. azardous Combustion Products: Nitric acid. Oxides of carbon. Oxides of nitrogen. Ammonia. Aldehydes. Ketones. Phenolics. Unusual Fire or Explosion azards: 6. ACCIDENTAL RELEASE MEASURES In Case of Spill or Leak: Soak up with inert absorbent. Store in closed container until disposal. 7. ANDLING AND STORAGE andling: Do not get on skin. Avoid contact with eyes, skin, and clothing. Do not breathe vapor or mist. Do not get in eyes. Keep container closed. Use only with adequate ventilation. Wash thoroughly after handling. Storage: Keep container tightly closed. Keep in a cool and well-ventilated area. For information on product shelf life, contact Loctite Customer Service at 1(800) EXPOSURE CONTROLS/PERSONAL PROTECTION Engineering Controls: Use local exhaust ventilation if the potential for airborne exposure exists. Eye/Face Protection: Chemical splash goggles or safety glasses with side shields. Full face shield should be used if the potential exists for splashing or spraying of product. Skin Protection: Use chemical resistant, impermeable clothing including gloves and either an apron or body suit to prevent skin contact. Butyl gloves. Neoprene gloves. Nitrile gloves. Viton gloves. Respiratory Protection: Use a NIOS approved air purifying respirator with an organic cartridge if there is potential to exceed exposure limits. See Section 2 COMPOSITION/INFORMATION ON INGREDIENTS for exposure limits

4 MATERIAL SAFETY DATA SEET Page 04 of 06 FIXMASTER ALUMINUM PUTTY ARDE 9. PYSICAL AND CEMICAL PROPERTIES Color: Silvery. Material State: Paste. Odor: Slight Ammonia-like. Boiling point: p: Solubility in Water: Partially soluble Specific gravity: 1.5 VOC: Vapor Pressure: Vapor density: Not Available Evaporation Rate: 10. STABILITY AND REACTIVITY Stability: Stable. Conditions to Avoid: Incompatibility: Oxidizing agents. Mineral acids. Organic acids Oxidizing agents. Sodium hypochlorite. Calcium hypochlorite. Copper. Aluminum. Zinc Nitrites. Nitrosating agents. azardous Polymerization: Will not occur. azardous Decomposition Products: 11. TOXICOLOGY INFORMATION Product Toxicology Data: Carcinogen Ingredient NTP IARC OSA Triethylenetetramine No No No Amine resin No No No N-(2-Aminoethyl)piperazine No No No 4,4'-Isopropylidenediphenol No No No Nonylphenol No No No Benzyl alcohol No No No Glyceryl poly(oxypropylene) triamine No No No Silica, amorphous, fumed, No N/A No crystalline-free Aluminum flake No No No Key to abbreviations: IARC N/A - Not applicable.

5 MATERIAL SAFETY DATA SEET Page 05 of 06 Ingredient FIXMASTER ALUMINUM PUTTY ARDE ealth Effects/Target organs Triethylenetetramine Amine resin N-(2-Aminoethyl)piperazine 4,4'-Isopropylidenediphenol Nonylphenol Benzyl alcohol Glyceryl poly(oxypropylene) triamine Silica, amorphous, fumed, crystalline-free Aluminum flake Allergen. Developmental. Irritant. Mutagen. No Records. Irritant. Allergen. Irritant. Blood. Kidney. Spleen. Allergen. Corrosive. Irritant. Kidney. Allergen. Corrosive. Irritant. Central nervous system. No Records. Nuisance dust Irritant. Lung. Central nervous system. 12. ECOLOGICAL INFORMATION Ecological Information: 13. DISPOSAL CONSIDERATIONS Recommended Method of Disposal: Dispose according to EPA and local governmental regulations. EPA azardous Waste Number: Not applicable. 14. TRANSPORTATION INFORMATION Domestic Transportation (D.O.T. 49 CFR)-GROUND Shipping Description: Shipping name: (More than 1 liter) Amines, liquid, corrosive, n.o.s. (aminoethylpiperzine, triethylenetetramine) Class/Division: 8 IDENTIFICATION Number: UN2735 Packing group: II Exceptions: (Not more than 1L) Consumer Commodity ORM-D International Air Transportation (ICAO/IATA)- Shipping description: Shipping name: Amines, liquid, corrosive, n.o.s. (aminoethylpiperzine, triethylenetetramine) Class/Division: 8 Identification Number: UN2735 Packing group: II Exceptions:

6 MATERIAL SAFETY DATA SEET Page 06 of 06 FIXMASTER ALUMINUM PUTTY ARDE Marine pollutant: 15. REGULATORY INFORMATION SARA Title III Section 313 Chemicals: 4,4'-Isopropylidenediphenol, Aluminum flake SARA Title III Section 311/312: Immediate health hazard, Delayed health hazard Toxic Substances Control Act: All components are listed on or are exempt from listing on the Toxic Substances Control Act Inventory. TSCA Section 12(b) annual: TSCA Section 12(b) one time: Canadian Inventory Status: One or more components are not listed on or exempt from listing on the Canadian Domestic Substances List or have not been fully investigated. Contains a component(s) listed on the Non-Domestic Substances List. California Proposition 65: No California Proposition 65 chemicals are known to be present. 16. OTER INFORMATION NFPA Code: ealth: 3 Flammability: 1 Reactivity: 1 Special: Corrosive MIS Code: ealth: 3 * Flammability: 1 Reactivity: 1 Protective Equipment: See Section 8. Prepared by: Safety, ealth and Regulatory Affairs - North America

HENKEL CONSUMER ADHESIVES 08/02/05 AVON, OH TELEPHONE: (440) MATERIAL SAFETY DATA SHEET Page 01 of 07

HENKEL CONSUMER ADHESIVES 08/02/05 AVON, OH TELEPHONE: (440) MATERIAL SAFETY DATA SHEET Page 01 of 07 MATERIAL SAFETY DATA SHEET Page 01 of 07 1. PRODUCT AND COMPANY IDENTIFICATION Product name: Product Type: EPOXY HARDENER 2. COMPOSITION/INFORMATION ON INGREDIENTS Ingredient CAS Number % Exposure Limits