Manhattan Massage Chair LC7800. Owner s Manual

Transcription

1 Manhattan Massage Chair LC7800 Owner s Manual

2 Thank you for choosing the Manhattan Edition Massage Chair to complement your lifestyle and comfort needs. Carefully and thoroughly read this manual before using this product to ensure proper operation. We recommend keeping this manual for regular review and future reference. This Owner s Manual should be kept on hand for easy reference. This product is intended for indoor use only. Product is subject to change. Color may have slight variation. Pictures used throughout this Owner s Manual are for representation purposes only and may not be exact to your specific model. Contents Safety Precautions Features and Functions Components and Descriptions Before Use Adjusting The Massage Chair Starting The Massage Chair Turning On The Main Power Switch Start The Automatic Vitality Massage Mode Roller Massage Air Massage Foot Massage Heat Therapy Smart Automatic Mode Adjustment D Smart Manual Mode Adjustment Massage Chair Customize Massage Chair Customization Storage Massage Chair Angle Adjustment Massage Chair Switching Modes Massage Chair Navi Keys Massage Chair Operation Indication Massage Chair - End of Use Massage Chair - Emergency Stop Massage Chair - Troubleshooting Massage Chair - Care and Storage Massage Chair - Specifications Warranty Warranty Card The recommended massage session is 15 minutes. Do not use the massage chair for longer than 15 minutes and do not continue to massage a specific area for longer than 15 minutes. You must rest for at least 30 minutes before using the massage chair again. Usage greater than 15 minutes without a 30 minute rest period can result in over-stimulation of muscles and nerves. This product is not a medical device and is not intended to cure ailments. If you feel any discomfort at any time during use, discontinue use immediately. If you find any abnormal condition, stop using the massage chair immediately.

3 Safety Precautions Carefully and thoroughly read this manual before using this product. The Owner s Manual should be kept in an easily accessible place for future reference. Please pay special attention to all caution and warning symbols and labels throughout this manual and on the massage chair. The Owner s Manual contains important information about how to use the massage chair safely and correctly avoiding any possible damage to property and injury to users. If you feel any discomfort at any time during use, discontinue use immediately. This action could result in serious injury or death. This action could result in personal injury or damage to personal property. This symbol means DO NOT DISASSEMBLE. This action means to UNPLUG THE CHAIR. This action mean PROHIBITED USE. If you find any abnormal condition, stop using the massage chair immediately. o If you find that the massage chair is malfunctioning, stop operation immediately, unplug the massage chair cord from the wall receptacle and contact your dealer. If you continue to operate the massage chair, it can lead to damage of the massage chair, electric shock, fire, and/or serious bodily injury. o If there is a lightning storm, do not use the massage chair and unplug the massage chair cord from the wall receptacle. o If any liquid is spilled onto the massage chair, any abnormal noise heard from the massage chair, any obstacle placed onto the massage chair, or the massage chair is drooping down, tipping over, or has broken parts, stop any and all operation of the massage chair and unplug the massage chair cord from the wall receptacle. -1-

4 o If you become uncomfortable at any time when using the massage chair, stop stop using the chair immediately. o Only use the massage chair when it is placed on a level floor. o When operating the massage chair, make sure the switches are operation with reference to their intended functions. o Any persons having the following conditions must not use the massage chair: Persons who have thrombosis, severe aneurism, acute varicosity, or skin infections including inflammation of the hypodermis Persons who feel discomfort when using the massage chair o Any persons with any of the following conditions should seek medical advice from his/her medical physician: Persons who have electronic medical devices or have electronic medical devices easily susceptible to electromagnetic interference Persons with malignant tumors Persons with serious heart disease Woman who are in their menstrual period or pregnant Persons with sensory disturbance caused by peripheral circulatory disorder due to diabetes Persons with sensory disturbance caused by other medical disorders Persons being treated for personal injuries Persons with a high fever greater than 100 o F/38 o C Persons with medical conditions such as acute inflammation, high blood pressure, or chills Persons with sickness or under bed rest orders Persons with Osteoporosis, spinal fractures, or acute pain Persons with inflammation due to sprains or muscle strain -2-

5 Do not use the massage chair when your hands or body is wet as it could result in electric shock and personal injury. Do not spill water or other liquid onto the massage chair. Do not place massage chair in a humid environment such as a bathroom. Placing the massage chair in a humid environment could result in electric shock and personal injury. Do not operate the massage chair with children or pets playing on or near the massage chair. Make sure before operating the massage chair that you can do so when children and pets are a safe distance away. Do not attempt to disassemble or repair the massage chair, power cord, or controller on your own. It may result in electric shock, personal injury, or malfunction of the massage chair. Do not tamper with or manipulate the power cord. The power cord should not be damaged in any way when operating the massage chair. Do not bend, stretch, twist, or wrap the power cord. Do not hang the power cord up on objects or furniture. A damage power cord could result in electric shock, fire, and/or personal injury. o This product is not intended for use by children or persons with reduced mental capabilities. Keep children, persons with reduced mental capabilities and pets away from the massage chair when in use. o Do not use this product with any other power source other than AC 110V-120V. Do not wrap the power cord around the power chair as this can result in electric shock, fire and/or personal injury. o Do not let children or pets sit and play on or near the massage chair as this can result in physical injury or malfunction. -3-

6 o When the massage chair is in use, do not place your fingers into the gap between the housing and cushion of the massage chair as this can result in physical injury. o Do not use the massage chair to massage the head or stomach as this can result in nausea and/or physical injury. o Do not use the massage chair without its cloth cover. o Do not use the massage chair if the cloth becomes damaged or ripped. In the event of a power failure, switch the main power switch to OFF. Then disconnect the power cord from the wall receptacle. This will prevent any unexpected sudden operation when the power failure is restored. Do not touch the wall receptacle, plug, or power cord with wet hands. When not using or if a power failure occurs when the massage chair is in operation, turn the main power switch OFF and disconnect the power cord from the wall receptacle to prevent electric shock or accidental injury. In the event of cleaning the massage chair, turn the main power switch OFF on the massage chair and disconnect the power cord from the wall receptacle to prevent electric shock or accidental injury. When disconnecting the massage chair power cord, please do so by removing the plug and not by grabbing the massage chair power cord and pulling. Pulling on the massage chair power cord can result in electric shock, short circuit, fire, and/or physical injury. Do not use the massage chair immediately after a meal or drinking fluids as this may result in discomfort. Do not hang any object using the massage chair power cord. Handle the controller with care. Do not drop the controller as it could result in electric shock, fire, and/or personal injury. Do not use the massage chair near any open flames, such as a fire place, or any other heating device. Do not place the massage chair near floor heating systems as it could result in fire. Do not smoke while operating the massage chair and do not place the massage chair where there is underfloor heating. -4-

7 o Do not rip, tear, or cut the massage chair fabric cover. This could result in personal injury and malfunction of the massage chair. o Do not bend, twist, or stretch the power cord as this could result in electric shock and/or fire. o Do not operate the massage chair if the power cord shows any signs of damages. Do not plug the massage chair cord into a loose or damaged wall receptacle as this could result in electric shock, fire, and/or personal injury. o Do not force any overloading of each function setting as it will result in malfunction of the massage chair and possible personal injury. o Do not operate the massage chair if you are drowsy or sleepy. Do not fall asleep while the massage chair is operating as this can lead to unconsciousness and result in discomfort and/or personal injury. o Do not drag the massage chair over the floor as this can damage your floor and cause the massage chair to malfunction. Carry or roll the massage chair (if it has wheels) carefully so as to not damage the massage chair or scratch your flooring. o This product is designed for home use and not for commercial purposes. o Do not operate the massage chair under any cloth materials, such as a blanket. This could lead to excessive heating of the massage chair and could result in a fire and/or personal injury. o Make sure the massage chair power cord fits snuggly into the wall receptacle. Be sure there is not dust obstructing the connection between the massage chair power cord and wall receptacle. o Do not stand or tread on the massage chair. Do not force overloading the massage chair as this could lead to personal injury. -5-

8 o Do not use the massage chair near any open flames or flammable gas. This could result in a possible fire, personal injury, or malfunction and damage of the massage chair. o Do not use the massage chair near areas where aerosol spray products are used as this can damage the massage chair. o Do not clean or spray the massage chair with abrasive cleaning agents such as detergent, alcohol, or other chemical based agents as this can lead to fire, electric shock and/or damage the massage chair. o Keep children and persons with reduced mental capabilities away from the massage chair when it is being operated. o This product is not to be used by children, persons on bed rest, or persons with reduced mental capabilities unless directed by a medical physician. Features and Functions 1. Sensor Fit: Figure Scanning Measurement and Shoulder Detecting System Before starting the massage process, this system will automatically detect the user s upper body configuration including the curvature of the user s body from the head to the caudal vertebra. This information is collected through feedback of the pressure valve of the massage wheel. The system can detect the shoulder position and the upper body figure based on the user s height. In addition, the system can sense the user s weight and physical feedback as well. The system can offer a massage of medium intensity for the human body through the collaboration of the dual core. 2. 3D Core: The Dual Core and control system is the original system created by Jiugong (Jiugong is considered to be at the forefront in leadership of manufactured health-care products), with the latest in three invention patents. -6-

9 3. Best Position: Sitting at 118 degrees, you will relieve your body and relax your muscles and emotional mind to the fullest while achieving the most optimized massage. The hip/back integrated structure can ensure that the user will get the most precise positioning massage with this erogonmic massage chair. The massage chair coordinates all massaging functions and operations as well as enhancing its massaging function to the highest benchmark in the massage chair industry. 4. Hip Shape: As the pioneer of hip shaping in the industry, Jiugong has taken the lead in using the pelvic shaping system with a sales volume of over 500,000 sets in Japan. The 3D aero hip shaping, comprised of three groups of airbags at both sides of the hips, tightens up, rectifies, and conducts hip massage as a process of hip shaping. 5. Human Touch Screen: The fashionable and simple to use high-tech sub-controller is the large LCD with touch screen operation. It is user friendly for users aged 20 through 80 (may be subject to consultation with your medical physician). The touch screen computer has a human interface system that allows users to enjoy thousands of massaging methods. 6. Auto Program: The customized automatic program has been developed by the leading figure-shaping Japanese master. The most professional massaging techniques have been incorporated into the massage chair replicating massage by finger-pressing, rubbing, patting, pounding, massaging, rotating, and other massaging methods. This program integrates the judo barometric pressure massage system from head to foot. You have the option of combining and modifying different massaging techniques creating your own favorite massage program. 7. Magunnes: Our mini-type electric motors are being used by over 60% of the major high-end massage chair manufactures throughout the world. Magunnes, which has been developed based on professional experience and highest performance, is the exclusive mini-type electric motor designed by LITEC. These motors have strong power with minimal noise, surpassing performance of similar motors produced by competitor companies. 8. Aeroslim: The aero system is made up of flexible airbags that have strong performance and an extensive moving range. With this technology, the massage chair realizes the capability of shaping and slimming the body. This flexible airbag technology of Jiugong has application usage with many Japanese massage products. You will assume the benefits of this cuttingedge equipment when using LITEC designed products. -7-

10 9. Carbon Fiber Heat Treatment: Targeted for a healthier lifestyle, this massage chair introduces foot, leg, and waist heat treatment. The most advanced carbon fiber heating technology has been adopted into the massage chair. The heat is safe and highly effective, taking only 10 seconds to reach up to 113 o F/45 o C. 10. Shiatsu for Head and Hand: Designed to relieve stress and tiredness from the head to the hands, this massage chair has taken the lead in innovative technological methods. The integrated design provides immediate comfort in the ergonomic design of the head and hand placement. After the massage chair has completed the detecting function, it will adapt to gently massaging those areas of the head and hands surpassing other massage chairs with similar functions. Components and Descriptions -8-

11 1. Power Cord and Receptacle: One end of the power cord with be connect to the applicable connection on the massage chair, usually at the lower rear of the massage chair. The other end will be connected to the wall receptacle. Make sure the main power switch on the massage chair is turned OFF before plugging the end into the wall receptacle. Do not attempt to make any modifications or repairs on the massage chair on your own. Conact your dealer for any needed repairs. 2. Main Power Switch Turn the main power switch to the ON position on the massage chair, usually at the lower rear of the massage chair. After you turn the main power switch to the ON position, the massage chair will go into standby mode. Prior to pressing the START button, you will only be able to adjust the seat angle and the leg part angle. 3. Controller A. Switch: Allows you to enter or exit the standby mode. When the main power switch is pressed to ON, the red indicator light will illuminate. When the main power switch is pressed again to OFF, red light will L --- turn off. B. Emergency Stop: The Emergency Stop button should be pressed in the case of an emergency or if you feel discomfort or if the massage chair malfunctions. Once pressed, the airbags will deflate and moving parts will stop operating. A B C. Automatic Mode: There are 8 optional automatic massage settings. Press any of the buttons and C --- the corresponding automatic massage setting will start to operate. You will be able to adjust the --- D massage strength, 3D smart function, and the heat. E F D. Manual Mode: There are 4 optional manual modes. G --- You can choose the massage strength, judo massage, foot massage, and hot compressing base on your H I preference. You will be able to adjust the massage strength, 3D smart function, judo strength, force J K strength, massage width, and the massage range. -9-

12 E. 3D Smart Function: You can enter the 3D Smart Function interface when you press this button. The strength can be adjusted while in this function. F. Customization: This function allows you to customize and save the manual mode settings to your preference. G. Navigation and Enter Button: The Navigation and Enter Button allows you to enter or browse the menu, move the cursor, make choices/confirmations, adjust the 3D Smart function, adjust the massage speed, adjust the massage width, adjust the massage strength, set the massage range, and adjust the strength and range of optional settings. H. Force Strength: In the manual mode, the Force Strength is adjustable. I. Judo Strength: In the manual mode, the Judo Strength is adjustable. J. Seat Angle Adjustment: You can adjust the Seat Angle Adjustment to ascend and descend when you press this button. K. Leg Angle Adjustment: You can adjust the Leg Angle Adjustment to ascend and descend when you press this button. L. Liquid Crystal Display (LCD): The LCD allows you to see the operating menu functions. 4. Audio Wire and Audio Jack The massage chair comes with the capability of connecting audio devices to the speaker system on the massage chair. You can connect one end of the Audio Wire to your musical device and the other end to the massage chair Audio Jack. o Do not splash water or any other liquid onto the massage chair or controller. o Do not operate the massage chair with wet hands. o To not sit, drop, or tamper/dismantle the controller. Do not pull excessively on the controller wire. o Do not bring the controller, including the LCD monitor, within contact of any sharp objects as it may cause damage. -10-

13 Before Use Please carefully and thoroughly follow the instructions for assembling the massage chair. The massage chair is packaged with the massage chair back lying flat. Before operation, the massage chair back will need to be put to the upright position using the controller. When using the massage chair, do not operate the massage chair in a humid environment. Be sure not to drastically change the room temperature in which the massage chair resides. Drastic changes in room temperature can lead to rusting of the metal parts and greatly affect the operation of the massage chair causing damage. Massage Chair Placement Please be sure to have a clearance in front and behind the massage chair of approximately 20 /50 cm to prevent it from touching any objects or walls in the declined position. o Do not use the massage chair in the bathroom or any other humid environment. o Make sure the massage chair is assembled and operated on a flat level, non-slippery floor. o Do not use the massage chair in dusty and high ambient temperature environments. The ambient room temperature needs to be below 104 o F/40 o C. o Do not place the massage chair in direct sunlight or near heating equipment. o Do not smoke or operate the massage chair near any open flames. Proceed in laying a rug (or cardboard) under the massage chair to prevent damages to your floor. This is optional and will reduce operational noises. Never place the massage chair on and electric blanket/rug. Make sure the floor which the massage chair will be placed on can support the massage chair. Be careful not to damage your floor by dragging the massage chair. The placement of the massage chair needs to be at least 3.5 ft away from any and all audio devices such as a television or radio to avoid product interference. The weight limit of the massage chair is 220lbs/100kgs. -11-

14 Confirm Product Contents Installing The Footrest The footrest will need to be installed using the two Philip s screws and two Hex screws. First, connect the air hose line and the harness connection. Next, the footrest has guides that must be slid into the metal frame and then attached using the two Philip s screws on the top of the metal rail and the two Hex screws on the side of the metal rail. -12-

15 How to Move When moving the massage chair, make sure the main power switch is in the OFF position and the massage chair cord is unplugged from the wall receptacle. When moving the massage chair using the caster wheels, straighten the massage chair to the upright position and grab hold of the two sides of the leg supports at the front of the massage chair. Lift and roll the massage chair to the desired location. When lifting and moving the massage chair, lay the back of the massage chair flat into the reclined position and grab hold of the sides of the massage chairs at the armrests. Now lift and move the massage chair to the desired location. To prevent damages to your floor, you can lay something over your floor such as a blanket or cardboard. Be sure not to drop the massage chair as this may cause damage to the massage chair as well as your floor. -13-

16 o The massage chair cannot be moved through doorways that measure less than 32 (in most cases). o Due to the weight of the massage chair, do not attempt to lift the massage chair if it is to heavy. Be cautious when lifting so that you do not injury yourself. o Be careful to not damage or drop the controller as it is attached to the massage chair. o Do not lift the massage chair when someone is sitting in it. o Make sure the massage chair power cord is disconnected from the wall receptacle before attempting to move the massage chair. How to Connect the Power Source 1. Connect the massage chair power 2. Turn the main power switch ON at the cord to the back of the massage rear of the massage chair. chair and plug the other end into the wall receptacle. Please Note: If the massage chair rollers get stuck, turn the main power switch ON and press the START button to return the massage chair to its default position. o Do not plug the massage chair power cord into an external transformer. o Make sure the massage chair main power switch is in the OFF position before plugging the massage power cord into the wall receptacle. o Make sure the massage chair power cord fits snug and tight into the wall receptacle. -14-

17 Connect the Power Cord and Controller If you have not used the massage chair for an extended amount of time, please examine the massage power cord to make sure it is in operable condition before plugging it into the wall receptacle. After you have plugged in the massage chair power cord to the wall receptacle, you can proceed to connecting the controller to the rear of the massage chair. Confirm the Material Before using the massage chair, make sure the massage chair leather and other massage chair coverings are not damaged: 1. Unzip the back cushion. 2. Make sure the massage chair material is not damaged by placing your hands into the area between the back cushion and the massage chair back. -15-

18 o Before using the massage chair, make sure there are no damages to the leather material/cloth material/plastic material of the massage chair. Even if a small tear is located, do not operate the massage chair and contact your dealer. Any damaged material is a safety hazard and the massage chair must not be operated. Adjusting The Massage Chair Please follow the instructions for adjusting the massage chair. Failure to do so can result in damaging the massage chair. Sitting in the Massage Chair In the default setting, the massage chair back rollers are displaced at the left and right side of the massage chair back and the footrest are position at the lowest position. For safety reasons, please make sure that the rollers are situated in the correct position before sitting in the massage chair. If the positions are incorrect, restart the massage chair using the controller. After the rollers return to their default positions, proceed in slowly sitting in the massage chair and placing your feet all the way back in the footrest. Please note: Before exiting the massage chair, make sure to first remove your feet from the footrest. o Once you have raised the footrest using the controller, do not sit in the massage chair. You must only sit in the massage chair once the footrest are lowered. o Before entering the massage chair, make sure the massage chair is in the upright position. Once you are in the massage chair, you can adjust the angle of the chair using the controller. o Never stand on the footrest as this can damage the massage chair. -16-

19 Adjusting the Angle of the Massage Chair You can adjust the angle of the massage chair by pressing the corresponding button on the controller. If you hold the button for over 3 seconds and then let go with the indicator light flashing, the massage chair will adjust to your position preference until the button or reverse button is pressed again. Please note: The main power switch at the rear of the chair overrides the controller. If the ON/OFF button on the controller is OFF, you will still be able to adjust the angle of the massage chair. If you press the STOP button, you will not be able to adjust the angle of the massage chair. o Be sure children and pets are kept away from the massage chair when it is in use. Do not adjust the massage chair angles when children or pets are near the massage chair. Make sure you have enough clearance at the front and rear of the massage chair when adjusting the angle of the massage chair back and footrest. -17-

20 Adjusting the Footrest While in the reclined position, you can stretch your legs by pushing your feet to lengthen the footrest. The footrest can expand outward by 160mm/6.3. Once the massage chair is returned back to its upright position, the footrest will adjust itself back to its original position. o Be sure children and pets are kept away from the massage chair when you descend the massage chair back and footrest. Never place your hands, fingers or objects under the footrest. Adjusting the Headrest The position of the headrest can only be adjusted upward or downward. It keeps in position based on the counterbalance attached to the headrest on the backside. Make sure to make any headrest adjustments before you operate the massage chair. -18-

21 If you want a more intense neck massage, lift the headrest over the top and this will expand the range of the 3D travel of the rollers. If you want a more intense back massage, remove the back cushion and roll it onto the top of the massage chair. This will intensify the 3D travel of the rollers. l o Once the headrest is lifted over the top of the massage chair, this will create more pressure on the back. The recommended massage time in this case should be less than the 15 minutes. Please note: There is a counterbalance in the inside of the headrest. Do not tamper with the counterbalance or headrest as this can result in physical injury. -19-

22 Starting The Massage Chair I. Turning on the Main Power Switch Once the Main Power Switch is turned ON, the red light will flash on the Controller. You will now be able to adjust the angle of the chair and footrest. Please follow the instructions in the previous section Adjusting The Massage Chair. Pressing the ON/OFF Button on the Controller Now you can turn ON the Controller by pressing the ON/OFF button. The functions on the Controller are now operable. Flashing of the Display The flashing of the display indicates that the automatic/manual mode is optional. You can now choose between 8 different modes of massage in the automatic mode and 4 different modes in the manual mode. You can also store the customized mode and adjust the massage chair back and footrest. -20-

23 Automatic Mode Pressing the Vitality button will begin the body scanning process. Be sure to seat all the way back and stay still as the scanning process completes itself. Self Body Scan Completed After completion of the body scanning process, the available features of the Vitality massage mode will be displayed on the Controller. After about 3 seconds, the automatic mode will be displayed on the Controller. -21-

24 II. Start the Automatic Vitality Massage Mode The Vitality massage mode has started. During this mode of massage, the display will show different massaging features. You will be able to adjust these features to your preference. When operating in the Automatic mode, the roller massage, air massage, and foot massage should be allowed to complete the program. You will not be able to change the range of the functions in this mode. You will need to set the heat compressing to your preference. When you modify the heat compressing feature, it will not interrupt the 15 minute massage cycle. Once the Automatic mode is completed, the heat compressing feature will also be completed. When operating the Automatic model, the speed and range of the roller massage and the speed of the foot massage are set. You will not be able to adjust these settings in the Automatic mode. The strength intensity is default to the medium settings, but you can adjust this to your preference. During the operation of the Automatic mode, the 3D strength can be adjusted. This adjustment will also affect the intensity of the pressure of the massage chair back rollers. The massage speed, range of the massage rollers, strength of the air massage, and the speed of the foot massage will be displayed at the bottom of the display screen while in the Automatic mode. The massage chair will have many health benefits including, but are not limited to: relaxation, health preservation, soothing sleep, body shaping, bone strengthening, waist shaping, enhance blood flow circulation, and more. You can try each function of the massage features to find what compliments you. Individual results will vary. -22-

25 III. Manual Massage Mode ROLLER MASSAGE A. Press the Roller Massage button and the Controller will display the menu for the massage chair back roller including kneading, shiatsu, and tap. Once you make a selection, the massage chair will proceed. B. Press the Enter button, press the button, and then the Enter button again. This will stop the current operating massage function. -23-

26 C. Press the button and the massage chair and the Controller will enter the selected massage mode process. You can move the cursor to select the massage range which includes the whole range, partial range, or fixed position. Once your selection is chosen, press the Enter button. D. Press the button and then the Enter button. This will allow you to change the massage range of the massage chair. In addition, you can adjust the massage intensity. -24-

27 E. Press the buttons and then press the Enter button. This will allow you to change the location of the back roller of the massage chair. These buttons will move the massage rollers up and down to accommodate your preference. Then press the Enter button again. E2. Press the buttons and then press the Enter button. This will allow you to change the massage roller range from Wide to Narrow. Then press the Enter button again. -25-

28 F. Press the button and then press the Enter button. This mode will allow you to change the massage change range. You can also adjust specific mode features. F2. Press the buttons and then press the Enter button. This will allow you to change the massage rollers to a fix point. Then press the Enter button again. -26-

29 G. Press the button and then press the buttons. This will allow you to adjust the width function. H. Press the Roller Pressure button and then press. Then you can adjust the strength by selecting the. -27-

30 H2. Press the button twice to adjust the roller pressure to the maximum. The above give you different applications of the massage chair controller. With the controller, you can make many adjustments with regards to the range, width, and speed. In addition, you can combine and adjust massage programs to customize and utilize different massages according to your own preference. The front kneading, shiatsu, and tapping can be selected concurrently. The shiatsu selection can only be selected individually and cannot work in tandem with the front CCW kneading, CW kneading, or the tapping. You should turn OFF the roller pressure button so that all of the roller massage functions will stop all at the same time. The massage range refers to the distance between the upper part to the lower end of the massage chair. The complete approximate range is 22 inches. The massage width range refers to the distance between the two rows of massage which are divided into 3 levels. The approximate measurements are wide = 7 inches, medium = 5 inches, and narrow = 3 inches. The roller pressure is divided into 5 levels which adjust the transmission of the tapping and kneading functions: Strength Tapping (times/minute) Kneading (times/minute)

31 Manual Massage Mode AIR MASSAGE A. Press the Air massage button and the massage chair enters the judo menu on the controller and the massage chair will begin massaging in the default mode (medium strength). On the controller, you will be able to select massaging positions for the head, shoulder, hip, back, waist, leg, foot, arms, and pelvis. When your selection is complete, press the Enter button to select ON or OFF. These options can be chosen concurrently. B. Press the and then press the Enter button. This will stop the massage of the head, shoulder, hip, arms, and pelvis. -29-

32 C. Press the Air Pressure and then the to adjust the strength. Medium strength is the default setting. D. Press the button to adjust the strength to the minimum pressure setting. -30-

33 The above indicates that you can select other massaging positions, adjust the massage strength, and select/combine/adjust the functions to your own preference. When the air massage button is pressed, the judo massage function will massage all of the body parts. When you select air massage, the massage chair will air massage all of the body parts. The strength will be set to default (medium). When you press OFF, the air massage will stop. The air massage strength has to do with the inflated pressure of the air bag. The strength is realized by the voltage exerted by the air pump. The air strength is divided into 3 levels: Air Strength Strong Medium Weak Voltage exerted by the pump (V) Inflated pressure of the air bags (kpa) Manual Massage Mode FOOT MASSAGE A. Press the Foot massage button and the menu will display on the controller. The massage mode will begin and run for 15 minutes. The speed will be set to the default speed of medium. In this mode, you can move the cursor on the controller to select the massage direction. You can move the position forward and backward. You can stop this function by pressing the OFF button. -31-

34 B. Press the button and then press and the massage chair will enter the Foot massage mode menu on the controller. By pressing the, you will be able to adjust the massage speed. C. Press the button and the Foot massage speed will be at the minimum setting. -32-

35 The above mentions that you can select and adjust the Foot massage speed. You can also combine functions and adjust functions based on your own preference. After the Foot massage button is pressed, the chosen setting will be set in the massage chair. If you want to stop the Foot massage function, you can press the Foot massage button. The Foot massage speed is changed by the adjustment of the Foot massage rollers. The speed is divided into three levels: Foot Massage Speed Speed of rolling wheel (times/minute) Manual Massage Mode HEAT THERAPY A. Press the Heat Therapy button and the menu will display on the controller. You can move the cursor to adjust the heating position. The areas include the waist, legs, and feet. Press the Enter button and this function can run concurrently with other massage functions. -33-

36 B. Press the and then press Enter. The waist will have been selected. The above indicates that you can select other heating positions combined with other massage functions. After the Heat Therapy button is pressed, the chosen setting will be set in the massage chair. You will be able adjust the heat setting or stop the heat altogether by pressing the OFF button. The heating temperature refers to the surface temperature of the heater. The comfortability of the heat function will vary by user. Under normal conditions, the surface temperature of the heater can increase within a short period of time. The temperature will not increase past 151 o Fahrenheit. Be sure not to use the massage chair for more than 15 minutes. Once the session is over, you should turn the Heat Therapy function OFF. IV. 3D Smart Automatic Mode Adjustment A. Press the 3D smart button and the menu will display on the controller. By default, the strength is set to 3. The strength level runs from 1 to 5 with 5 being the maximum strength. -34-

37 B. Press the button to increase the strength level. -35-

38 C. Press the to decrease the strength level. IV. 3D Smart Manual Mode Adjustment A. Press the 3D smart button and the menu will display on the controller. -36-

39 B. Press the button to increase the strength. C. Press the button to decrease the strength. -37-

40 The above indicates that you can adjust the 3D smart strength in both the manual and automatic modes. The 3D smart function allows you to adjust the pressure of the back rollers for comfort. The pressure should be soft to ensure the user can get the most comfort from the massage strength. In the automatic mode, the 3D smart function will test/scan the body of the user to sense their weight and the pressure needed for a comfortable massage. It will further measure the curvature of the user s back. The reason for the 3D intelligent intensity test/scan is to adjust the constant pressure value to accommodate the user s body type. This mode has 5 levels. In the manual mode, the 3D smart function will test/scan the body of the user under the direction of the user. The maximum range of the 3D smart massage wheel is approximately 3.5 inches. V. Massage Chair Customize A. Press the Customize button and the menu will display on the controller. You can move the cursor to select customization of the selected massage functions in combination under the manual mode or select massage functions that have been stored. -38-

41 B. Press the Enter button and select the operation function. C. Press the button and the menu will display on the controller. Then press to select. -39-

42 D. The customized operation will massage for 15 minutes. You will have three users in the customization function. They are: User 1 User 2 User 3 User User User Experience 1 Experience 2 Experience 3 You can select the customized massage combination in the customization function. -40-

43 V. Massage Chair Customization Storage A. Press the customize button and the menu will display on the controller. You can move the cursor to select and create massage function combinations in the manual mode. B. Press the buttons to select customize and then press Enter. -41-

44 C. Press the buttons and you will be taken back to the menu display. D. Press the and select 2. Then press Enter. You have selected the customization for User

45 The above indicates that you can select different combinations of massage functions in the customize selection. You also can store your combinations in the memory. Force massage, air massage, foot massage, heat therapy, and other manual modes can be selected and stored as well. The automatic massage functions cannot be selected and stored in the customize selection. You cannot adjust the angle of the massage chair and legs and store them in the customize selection. VI. Massage Chair Angle Adjustment A. Press the Back Rising button. The back of the massage chair will begin to rise. If you press and hold the button for at least 3 seconds, the back of the massage chair will rise continuously to the minimum angle until you release the button or press the lying flat button. B. Press the Lying Flat button. The back of the massage chair will begin to flatten out. If you press and hold the button for at least 3 seconds, the back of the massage chair will flatten out continuously to the maximum angle until you release the button or press the leg rising button. -43-

46 C. Press the Leg Rising button. The legs of the massage chair will begin to rise. If you press and hold the button for at least 3 seconds, the legs of the massage chair will rise continuously to the maximum angle until you release the button or press the leg lowering button. D. Press the Leg Lowering button. The legs will begin to lower. If you press and hold the button for at least 3 seconds, the legs of the massage chair will lower continuously and the button indicator light will flash. If you press the Stop button, you will not be able to adjust the angle of the seat or legs. o When adjusting the angle of the massage chair, please be sure children and pets are kept away from the massage chair while it is in use. Do not adjust the massage chair angles when children or pets are near the massage chair. Make sure you have enough clearance at the front and rear of the massage chair when adjusting the angle of the massage chair back and footrest. E. Adjustment of the Footrest If you feel that you cannot fully extend your legs, you can stretch your legs out as the footrest is designed to expand. The footrest can extend up to approximately 6.3. When the massage chair is returned to its upright position, the footrest will readjust itself back to its original configuration. -44-

47 o When adjusting the angle of the footrest, please be sure children and pets are kept away from the massage chair. Do not adjust the footrest angles when children or pets are near the massage chair. Please make sure not to place your hands or other body parts under the footrest when adjusting the footrest downward. VII. Massage Chair Switching Modes There are 8 automatic massage processes in the automatic mode. When certain processes are selected, you will be able to switch between processes in this mode. When a process is selected in the automatic mode, you can press a process in the manual mode and the automatic mode will stop. The massage chair controller will switch from the automatic mode to the manual mode. o Do not over use the switching function. Continual and excessive use of this function can cause failure to the massage chair. Please operate the massage chair with care. VIII. Massage Chair Navi Keys You can adjust the roller positions by pressing the adjust the brightness of the controller by pressing the buttons. You can buttons. -45-

48 A. Adjusting the Massage Chair Roller Position You can adjust the rollers upward by pressing the button. B. You can adjust the rollers downward by pressing the button. -46-

49 C. You can adjust the brightness of the massage chair controller. To increase the brightness, you can press the button. D. To decrease the brightness of the massage chair controller, you can press the button. -47-

50 IX. Massage Chair Operation Indication Indicates that the massage chair Indicates that the process is Indicates that some buttons will has been continuously used for completed and the massage is be viewed as invalid in certain more than 30 minutes. The user over. You can choose other massage processes. After 3 should not massage for more programs as the massage chair seconds, the indicator will than 15 minutes. Once the Enter has operated for less than 15 vanish. button is pressed, the indicator minutes. will vanish. Indicates that the massage chair Indicates that the Main Power Indicates that the massage chair will switch back to the initial state. Switch needs to be switched to is entering the standby status. OFF. You will need to switch the Main Power Switch to OFF. -48-

51 The massage chair comes with built-in speakers. You can connect your audio device to the massage chair using the AUX wire. Adding music will promote the massaging effect. o When listening to music, make sure the volume is turned down low and gradually increased to your listening preference. X. Massage Chair End Of Use Once you have concluded your massage session, you will need to raise the back of the massage chair and lower the legs completely. Proceed to press the ON/OFF button. The massage chair will return back to its initial position and the airbags will deflate completely, the massage rollers will move to the top of the back of the massage chair, the foot massage will stop, and the hot compressing will stop. You can now remove your feet from the footrest and stand up. Please note: Do not stand up while your feet are in the footrest. Now you can turn off the Main Power Switch and unplug the massage chair cord from the wall outlet. -49-

52 o After you have concluded your use of the massage chair, make sure the back of the massage chair is raised completely and the footrest is lowered completely. o After you have concluded your use of the massage chair, turn OFF the Main Power Switch and unplug the massage chair from the wall outlet. It is especially recommended to unplug the massage chair when children and pets are near and around the massage chair for safety. When unplugging the massage chair cord, be sure to do so cautiously and by holding onto the plug and not pulling on the massage chair cord. Do not leave the massage chair cord lying around as it can be a hazard and cause injury. o Please maintain the massage chair by keeping it clean and free of dust. XI. Massage Chair Emergency Stop When you press the Emergency Stop button, the massage chair will stop operating. The movement of the massage chair parts will no longer move and the airbags will deflate. Again, the mechanical parts of the massage chair will stop operating and the airbags will deflate as a safety measure. -50-

53 Once the situation causing you to press the Emergency Stop button has been resolve and there are no safety concerns, then you can press the ON/OFF button and the massage chair will return back to its initial state. o The Emergency Stop button was designed for the safety of users and to protect users from any harmful situations. Only press the Emergency Stop button in emergency situations. Do not use the Emergency Stop button to switch between massage modes and processes, to remove settings, or to reset functions. XII. Massage Chair Troubleshooting If you encounter any issues with the operation of the massage chair, please refer to the troubleshooting guidelines below. If you are not able to resolve the issue, stop using the massage chair immediately and contact your dealer. Make sure to unplug the massage chair cord from the wall outlet. 1. Problem The right and left rollers are out of alignment. Solution The rollers are designed with an alternating tapping mechanism and sometimes the rollers will be in the stopped position and out of alignment. This is how they were designed. -51-

54 2. Problem The rollers move up to the top of the massage chair and stop. Solution The auto timer will cause the rollers to move up to the top of the massage chair when the massage time of 15 minutes has expired. Do not interfere with this function at the conclusion of your massage session as this is part of the design of the massage chair. 3. Problem There is noise during the massage chair operation. Solution You will hear noises during the tapping function, during the kneading as the rollers rub up against the massage chair cover, during the roller operation as the rollers raise and lower, during the air massage as air inflates and deflates, during the air massage from the pump, and during the raising and lowering of the massage chair back. This noises are part of the design of the massage chair. 4. Problem The rollers stop during the massage chair operation. Solution If the rollers experience too much pressure, they will sometimes stop moving temporally. You can slightly lift your body or raise the massage chair back on the controller. This issue may occur when the user is greater than 220 pounds. 5. Problem The massage chair has no power and will not respond to the controller. Solution Check to make sure the massage chair power cord is properly connected to the wall outlet. Check to make sure the Main Power Switch is turned ON. Be sure not to press 2 buttons at the same time on the controller. 6. Problem The massage chair power cord is overheating. Solution Stop using the massage chair immediately and unplug the massage chair power cord from the wall outlet. Contact your dealer for assistance. If the massage chair is experiencing any of the following, stop operating the massage chair and contact your dealer: The massage chair does not start when the Main Power Switch is ON The massage chair power cord is damaged The massage chair cord becomes unusually hot The auto timer function is not working Other failures of the massage chair o If after reviewing the above troubleshooting guidelines and the problem has not been resolved, contact your dealer. Do not attempt to disassemble or make repairs to the massage chair on your own as this could void the warranty and also cause possible injury. -52-