EC Massage Chair. Operation manual

Transcription

1 Massage Chair EC800 IMPORTANT SAFETY INSTRUCTIONS... Names and Function... 6 Before Use... 8 Before using the chair... 0 Before using the chair every time... 4 Adjusting the chair... 5 How to use the massage... 7 How to use the recommended course... 8 Adjustment during massaging... 0 How to use the auto course... 4 How to use the basic course... 6 How to use the expert course... 8 Settings... 3 Changing massages during a massage Maintenance and storage Q&A Troubleshooting Inspection Aftersale service Specifications Operation manual Please refer to pages 83 for assembling instructions. Effect / Efficacy Substitution of massage for home use Thank you for purchasing a Fujiiryoki massage chair. Carefully read this operation manual before use and only use as directed. Please read the Safety Precautions on pages 5 before use. Keep this operation manual where it will be readily available for future referral. Please recycle the outer packaging material where possible.

2 IMPORTANT SAFETY INSTRUCTIONS Read these 'Important Safety Instructions' before use and use this product properly. These important safety instructions are prescribed to ensure correct usage of the product, and to prevent injury and damage to the user and other persons. To define the degree of injury and damage which may result from the incorrect handling of this product, these important safety instructions have been segmented into two classifications; WARNING and CAUTION. Both are important matters regarding safety so please abide by both. WARNING Improper usage may result in serious injury or death. CAUTION Improper usage may result in injury or damage to property.* * property refers to houses, household belongings, domestic animals and pets. (Example of pictorial indication) Prohibited actions The prohibited action is illustrated inside the illustration (for example, the illustration on the left refers to 'prohibiting disassembling') Directives, actions which are compulsory The prohibited action is illustrated inside the illustration (for example, the illustration on the left refers to 'unplugging the power plug') Always keep this operation manual where it will be readily available for referral. Attention When disposing of this product and/or its accessories, do so in accordance with local laws and regulations. For details please refer to your local authority.

3 WARNING The following persons must consult a medical physician before using this product.. Persons using a medical electronic device embedded in the body such as a pacemaker susceptible to the electromagnetic disturbances.. Persons with malignant tumors. 3. Persons with heart diseases. 4. Persons who are pregnant or those immediately after childbirth. 5. Persons who suffer from paresthesia related to peripheral circulatory disturbance due to diabetes etc. 6. Persons with wounds on their skin. 7. Persons in need of repose. 8. Persons with body temperatures exceeding 38. (when strong acute inflammation symptoms,malaise, hills, blood pressure fluctuations are observed, when debilitated) 9. Persons who suffer from osteoporosis, spinal column fractures, or acute pains. 0.Persons with abnormalities in the spine, or those whose spines are bent..persons suffering from inflammation such as sprains and muscle strains..persons with herniated disks. 3.Persons who feel an abnormality on the body not prescribed above. If the chair stops moving or any abnormalities occur, unplug the power plug and contact the point of purchase for an inspection/repairs. Electrification, short circuits and fire may occur. Take care of the movements of the knead balls when massaging around the neck. Avoid excessive massaging or massaging the front of the neck. Accidents or injuries may occur. When lowering the footrest, be careful not to get hands or feet caught underneath the footrest. Always check underneath the footrest for people, pets, and other items. Injury may occur. Always check behind the chair, and the area in front of and under the footrest for people, pets and items before reclining the seat back, or lowering/raising the footrest. () Below the chair. () Clearance between the seat backrest, the seat and the armrest. (3) Clearance between the footrest, the seat and the armrest. (4) Below the footrest and backside of the footrest. Otherwise, trouble or injury may be caused. Before use, check underneath the back pad to make sure that there are no rips or tears in the cover cloth of the seat back. (should there be any rips or tears, no matter how small, immediately discontinue use, disconnect the power cord, and ask for repairs to be conducted). Continued use with rips or tears in the cloth of the seat back may cause electric shocks or injuries. The following persons are strongly recommended not to use this product. Certain physical abnormalities may occur. Persons prohibited from receiving a massage by a medical physician. (for example those suffering from thrombosis, severe aneurysm, acute varicose veins, various kinds of dermatitis and skin infections (including inflammations of subcutaneous tissue), etc.) Immediately stop using the product if the cover is torn or holes are in the cover. Do not intentionally remove, tear or cut the cover. Never use the chair with the cover removed or torn as clothes and hair may get caught in the knead balls. Do not use the chair other than on the designated voltage. Fire or electrification many occur. Do not use the chair when the power cord or its plug is damaged, or when the receptacle is loose. Contact your point of purchase for repairs if the power cord or power plug are damaged in anyway. Continued usage may result in electric shocks, shortage, or even fire. Do not damage the power cord. Do not process, unreasonably bend, pull, twist or tie the power cord. Do not place heavy items on the power cord. Do not get the power cord caught, especially when moving the chair. Doing so may cause damage, fire and electrification. Do not allow unattended children or persons unable to declare their own intentions to use this chair. Do not allow infants near the chair. Electrification or injuries may occur. Do not allow children to play or get on the chair. Accidents or injuries may occur. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. 3

4 IMPORTANT SAFETY INSTRUCTIONS WARNING Do not use or store in bathrooms or places of high humidity or moisture. Electrification, fire, accidents, and moulding may occur. Never modify, disassemble nor repair the massage chair by yourself. Otherwise, the chair may catch fire or malfunction, resulting in injury. CAUTION Usage of this product should be limited to 5 minutes for each use. Continual use on the same part of the body should be limited to 5 minutes. Prolonged use may damage muscles and nerves (Only use for 30 minutes per day). The following persons should consult a medical physician before using this product. ) Persons whose muscles have become weak due to increasing age, and those who are of slim build. ) Persons suffering from lower back pain caused by bones or internal organs. 3) Persons easily bruised, susceptible to sprains. 4) Persons who suffer from intense motion sickness. 5) Persons who have undergone internal organ or heart operations. Install the chair carefully. Otherwise, the floor may be damaged. Use the chair on a level surface. Damage or accidents may occur. Make sure operation buttons and timers are operating normally before use. Accidents or injury may occur. Read the operation manual once again and confirm the product is operating normally before using the chair after a prolonged period of nonuse. Accidents or injury may occur. Check the main unit (seat, backrest and footrest) for any wedged foreign matter. An accident or injury may be caused. Sit down slowly after confirming the location of the knead balls. Accidents or injury may occur. Consult a doctor or specialist if no benefits are realized after using the chair. If you feel any physical abnormality during use, stop using the chair immediately and consult a doctor. If any rashes, reddening of the skin, itches or similar symptoms appear after using this product, immediately stop using the product and consult a physician. Accidents and ill health may occur. Turn the power switch OFF and unplug the power cord after use. This may result in accidents due to children's mischief. Turn the power switch OFF and unplug the power cord in times of power shortages. When power is restored accidents may occur. Pull out the power plug by holding the actual power plug and not the cord. This may cause electrification, short circuits, or fire. Unplug the power plug when not using the chair. There is a danger that moisture may lead to insulation aging, which may cause electrification. or fire. When maintaining the chair always unplug the power cord. Do not unplug the power cord with wet hands. This may cause electrification or injury. 4

5 CAUTION Do not overturn the chair or subject the chair to any strong shocks. Damage or injuries may occur. Make sure the power plug is inserted firmly, and that there are no pins or debris on the plug. This may cause electrification, short circuits, or fire. Do not use immediately after eating. Nausea or illness may occur. Do not use the chair after consuming alcohol. Accidents or injury may occur. Do not use close to stoves or other sources of fire, nor smoke whilst using the chair. This may cause fire. Do not stand on the seat, or get on the seat back, footrest, arm or shoulder portion of the chair. The user or the chair may rollover and injury or accidents may result. Do not try to sit or get up from the chair whilst the footrest is elevated. Doing so may result in damage to the chair or injury. Do not use accessories other than those which accompany the chair. Doing so may cause product malfunction. If you massage your hands and arms, remove any accessories such as fake finger nails, wrist watch, finger ring, bracelet, etc. Injury may be caused. Do not use the chair whilst wearing earrings, necklaces, scarfs, or other ornaments. This may cause injury. Do not use the chair whilst wearing hard objects on the head, such as hair ornaments. This may cause injury. Do not use the thigh or hip massages with hard objects in pockets. This may cause accidents or injury. Do not use while naked. Direct massages on the naked body may damage the skin. Do not use on the elbow, knee, head, abdomen areas. Do not get hands or feet caught in the knead balls. Injuries may occur. Do not pull out the power cord, or turn off the power switch whilst using the chair. This may cause injury. Do not sleep whilst using the chair. This may cause ill health or injury. Do not place hands or other parts of the body under the footrest or chair. Accidents or injury may occur. Make sure no more than person is on the chair at any one time. Doing so may result in damage to the chair or injury. Do not stretch the cloth unreasonably or pierce with sharp objects. This may cause accidents or injury. Do not wipe with benzine, paint thinner or alcohol, nor spray with any pharmaceutical sprays. This may cause fire or electrification. Not to be used for purposes other than massage purposes. This may cause damage or accidents. Do not use other therapeutic equipment whilst using this product. Do not move the chair while people or items are on the chair. Damage or injuries may occur. Do not move the chair using the casters on easily scratchable surfaces. Be careful not to scratch the flooring. Do not allow the power cord and the remote control cord to get caught in the legs or casters. Injury may be caused. In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility. 5

6 Names and Functions Chair Back pad Sit back on this in a comfortable position. Shoulder unit Provides an air massage for the shoulders. Arm unit Air massage for the arms. Waist unit Provides an air massage for the waist and both sides of thighs. Pillow Flip over to the back when massaging. Seat back Provides an air massage for the whole back. Remote controller Operates the main unit. Seat Provides an air massage for the hip and thighs (behind). Footrest Provides an air massage for the legs and feet. Remote control stand Ornament Quick operation guide Cord clip Handle Shoulder Waist Massaging points Massage area covered by the mecha (knead ball) massage Arm Hip Thigh (behind) Calf Caster Power cord plug Power cord Power switch Always turn OFF after use. Ankle Feet soles 6

7 Remote control "Power" lamp Turning on the massage chair by pressing the ON/OFF button will light up the power lamp. "STOP" button Stops all operations. (Press this button to stop massages immediately) "ON/OFF" button Prepares and ends massage operations, and moves the kneading balls to the stored position after the end of the massage. LCD screen Information will be displayed. "MENU" button Displays the main menu screen. "CROSS KEY" The selection key for various functions. "OK" button Finalise your selection. "FOOTREST" RAISE and LOWER button Adjusts the angle of the footrest. "RECLINING" RAISE and RECLINE button Adjusts the angle of the seat back and footrest. The footrest moves in concert with the seat back. "RESET" button Raising of the seat back and lowering of the footrest. If the chair is not operated for more than 5 minutes, the display on the LED screen will turn off automatically. If the LED screen is not displayed, press the button. The reclining button, footrest button and storage button are operable when the power switch of the main unit (see page 6) is in the ON position. 7

8 Before Use Remove the chair and the accessories from the carton Chair Accessories Back pad Remote control stand Screws Operation manual and other documents Operation manual Quick operation guide Attention Do not use any accessories other than those which come with the chair. Pillow ( pcs.) Hexagonal wrench (Cross section) 4mm Where to place the chair Place the chair on a level surface with enough surrounding space. Attention When the seat back is reclined, the footrest 40cm or more 45cm or more will elevate. Keep more than 40cm of space in front of the chair and more than 45cm of space behind the chair. Attention Attention Using a mat of some kind underneath the chair is recommended to prevent from scratches in the flooring. Avoid placing the chair in a place exposed to direct sunlight for prolonged hours, or in places susceptible to high temperatures, e.g.. close to heating appliances. There may be a possibility of the chair or the accessories discoloring or transforming. 8

9 How to move the chair < When moving the massage chair by yourself > Lift up the front side of the chair, and push it forward. Lift up the front of the chair. Caster < When moving the massage chair in twos > Lift up and move the massage chair while holding the front bottom and rear back side. CAUTION Do not move the chair with persons or items on the chair as the chair may overturn. Damage or injuries may occur. Do not move the chair using the casters, or drag the chair as this may result in floor damage. Do not hold onto the seat and footrest. Be careful when lifting up the front side of the chair as the chair is very heavy. Do not allow the power cord and the remote control cord to get caught in the legs or casters. Work in twos or more persons when lifting and moving the massage chair. 9

10 Before using the chair Switch on the power Plug in the power cord. Check whether the power cord, remote control cord or power plug are not damaged, and that there are no pins or debris on the plug. Switch on the power switch. The power switch is located to the bottom, behind the chair. WARNING Do not use the chair other than on the designated voltage. Do not use the chair when the power cord or its plug is damaged, or when the receptacle is loose. Contact your point of purchase for repairs if the power cord or power plug are damaged in anyway. Damage or injuries may occur. 0

11 Raising the seat back Press the button of the remote control to raise the seat back. Operate the chair as explained in How to use the reclining feature (see page 5). How to install the back pad and the pillow Attach the back pad to the zipper of the backrest. When massaging, attach the back pad. Back pad Zipper Attach the pillow to the Velcro tape of the back pad. ) Turn up the Velcro tape on the pillow attachment surface of the seat backrest so that the tape faces upward. ) Attach the pillow to the Velcro tape ). ) Pillow Velcro tape ) Use the seat pad and remove the pillow when using the chair. If the massage feels strong, use the pillow. When not using the massage functions of the chair, attach the back pad and pillow, and use as a reclining chair. Pillow attachment surface WARNING Before use, check underneath the back pad to make sure that there are no rips or tears in the cover cloth of the seat back (should there be any rips or tears, no matter how small, immediately discontinue use, disconnect the power cord, and ask for repairs to be conducted). Continued use with rips or tears in the cloth of the seat back may cause electric shocks or injuries.

12 Before using the chair When attaching the remote control stand on the left hand side. How to install the remote control stand Detach the ornament. Left hand side Ornament (with holes) Concave portion Anchor the remote control stand securely with the set screws. Anchor the remote control stand to the arm unit. Anchor the remote control stand in positions using the set screws. CAUTION Attach the remote control stand properly. Failure to do so may result in the remote control stand coming loose which may result in accidents or injuries. Remote control stand Remote control stand screws Hexagonal wrench 3 Attach the ornament (with holes). Ornament (with holes) Attach the ornament without holes on the right hand side. Right hand side Ornament (without holes)

13 How to install the remote control Clamp the remote control cord so that it does not sag. ) Hang the cord on the cord clip from above. ) Clamp the remote control cord with Velcro tape. ) ) Cord clip Cord clip (Remote control cord) Insert the remote control into the remote control stand. ) [Installation] Insert the remote control from the bottom to the top. [Removal] Hold the top of the remote control and remove it while pulling toward you. ) Turn the fixing screw and attach the remote control in a desired position. ) ) Tighten Loosen Fixing screw 3

14 Before using the chair every time Plug in the power cord. Switch on the power Check whether the power cord, remote control cord or power plug are not damaged, and that there are no pins or debris on the plug. Switch on the power switch. The power switch is located to the bottom, behind the chair. Checklist WARNING Do not use the chair other than on the designated voltage. Do not use the chair when the power cord or its plug is damaged, or when the receptacle is loose. Contact your point of purchase for repairs if the power cord or power plug are damaged in anyway. Damage or injuries may occur. Always check the surrounding area of the chair. Always check behind the chair, and the area in front of and under the footrest for people, pets and other items. <the standby position> When the button is pressed to start the massage, the footrest will automatically elevate to the standby position. Check the chair itself. ) Check underneath the back pad and pillow to make sure that there are no rips or tears in the cover cloth of the seat back. * Should there be any rips or tears, no matter how small, immediately discontinue use, disconnect the power cord, and ask for repairs to be conducted. Pillow Back pad <the standby position> 3) Check the position of the seat back and footrest before use. You may be injured if you sit on the chair recklessly with the seat backrest reclined or the footrest raised. Press and hold the button to store the seat backrest and footrest. 3) 4 ) Check whether the power cord, remote control cord or any other items are not caught in the chair. 4) Check the position of the knead balls before use. If the kneading balls are not in the stored position, press the button to move them to the top position. Stored position 4)

15 Adjusting the chair How to use the reclining feature Attention When reclining the seat back while massaging, do so slowly taking the strength of the massage into consideration. If the seat back is reclined while massaging, the massage operation stops. To recline the seat back, press the Stop pressing the button. button at the desired seat back angle. The seat back continues to recline while the button is pressed and held, until a beep sound is emitted. The lower the seat backrest is reclined, the stronger the knead ball pressure becomes. The footrest also moves up and down in conjunction with the seat back movement. The reclining operation is disabled while the kneading balls are stored. Recline the chair again after the kneading balls move to the storage position. WARNING Always check behind the chair, and the area in front of and under the footrest for people, pets and items before reclining the seat back, or lowering/raising the footrest. Not doing so may result in accidents and injury, or damage to property. CAUTION Do not stand on the seat, or seat back, footrest, shoulder or arm units. The user and/or chair may overturn, and may result in accidents or injuries. 5

16 Adjusting the chair How to use the footrest To adjust the footrest, press the button. Stop pressing the button at the desired angle. The footrest continues to rise while the button is pressed and held until a beep sound is emitted. * If the footrest is OFF, a beep sound is emitted also when it passes the standby position. * The footrest will not return to the stored position when the "foot air" option is "ON". * Turn the "foot air" option "OFF" to return the footrest to the stored position (refer to page 3). stored position Push the footrest with the soles of the feet to adjust the footrest extension length. The footrest returns to the original length when you raise your legs. CAUTION Check the footrest for any foreign matter before use. An accident or injury may be caused. Always check behind the chair, and the area in front of and under the footrest for people, pets and items before reclining the seat back, or lowering/raising the footrest. Not doing so may result in accidents and injury, or damage to property. Be careful not to get your feet or hands caught under the footrest when lowering the footrest. This may result in injury. How to use the reset function 6 If you press and hold the button, the footrest lowers and the seat backrest rises. If the button is pressed while massaging, the massage operation ends.

17 How to use the massage Introductory Note Sit deep in the chair and sit in a comfortable position with the head laid back on the seat back. Adjust the reclining angle and the footrest angle (see pages 5 and 6). If the LED screen is not displayed, press the button to display the LED screen. Select the desired massage course from the main menu. Recommended Course Whole body rejuvenation course P8 Auto Course Choose from 9 auto courses P4 Basic Course Basic kneading and tapping massages P6 Expert Course Expert knead massages P8 Settings To adjust strength level and shoulder position P3 The selected course starts with the AIR MASSAGE and FOOT STRETCH ON. To turn "OFF" these options, refer to "Adjustments during massages" (see page ). CAUTION Usage of this product should be limited to 5 minutes for each use. Continual use on the same part of the body should be limited to 5 minutes. Prolonged use may damage muscles and nerves. If you massage your hands and arms, remove any accessories such as fake finger nails, wrist watch, finger ring, bracelet, etc. Injury may be caused. Massage Chair Meister 7

18 How to use the recommended course Select the Recommended Course from the main menu using the buttons, and press the button. Automatic detection of the shoulder position starts. During automatic detection, lean back in the chair so that your head touches the seat back. When automatic detection ends, the main menu screen changes to the massage screen and massaging starts. To manually set the shoulder position If you press the button during the automatic detection of the shoulder position, automatic detection is changed over to the manual setting mode. Using the buttons, set the kneading balls to the desired shoulder position and press the button. If the button is not pressed, the operation changes automatically to the massage operation in the last selected position. The shoulder position can be selected from 9 positions. High Shoulder Position Target shoulder position Position of knead balls Set the knead balls in between the base of the neck and the base of shoulder. Low 8

19 3 The course starts. To set the mechanical/airmassage strength, function and shoulder position, refer to Adustment during massages (see page 0). Mechanical massage strength Status of airoperation Name of current course Remaining time Position of kneading balls Adjustment during massage refer to page 5 refer to page refer to page 4 5 The massage operation ends in about 5 min. The main menu is displayed on the LED screen and the knead balls return to the stored positions. After the knead balls are stored, press the button to raise the seat back and lower the footrest. Turn the power OFF and unplug the power cord from the power outlet after use. This is to prevent misoperation by remote control. CAUTION Turn the power OFF and unplug the power cord from the power outlet after use. This will prevent possible accidents from misuse by children. To discontinue massage immediately Press the button. The knead balls will stop in their present position. To stop the massage during a massage Press the button. The knead balls will return to their stored position. 9

20 Adjustment during massaging To adjust the massage strength Select the massage Strength using the buttons while the massage screen appears, and press the button. 3 Select a region using the buttons and select the desired massage strength using the buttons. To make numerous changes, use the buttons to select the next items without pressing the button. Press the button. Strength Display on remote control 8 levels levels Weak Press the screen. 7 Strong 8 button to return to the course If no buttons are pressed, the screen returns to the massage screen in about 0 seconds.

21 To adjust the shoulder and knead ball positions. Select the Shoulder Position using the buttons while the massage screen appears, and press the button. Set the massage position to the desired shoulder position using the buttons. The knead balls will move to the set position. Press the button to enter the shoulder position. If the button is not pressed, the operation changes automatically to the massage operation in the last selected position. The shoulder position can be selected from 9 positions. If you select the Shoulder Position during the massage, the massage operation stops and the knead balls move to the selected shoulder position. If no buttons are pressed, the screen returns to the massage screen in about 0 seconds. High Shoulder Position Low

22 Adjustment during massaging To turn the FOOTREST and AIR massages ON/OFF Select Status using the buttons while the massage screen appears, and press the button. 3 Select the setting item you wish to change using the buttons, and change the setting item using the buttons. To make numerous changes, use the buttons to select the next items without pressing the button. Move using the buttons. Selection of ON/OFF Change over using buttons 3 When the button is pressed, the screen returns to the massage screen. If no buttons are pressed, the screen returns to the massage screen in about 0 seconds.

23 Setting of the FOOTREST [Foot stretch] The legs are grasped with airbags and pulled down to perform the leg stretching operation. The foot stretch function can be turned ON/OFF. If the foot stretch function is turned ON while the footrest is in the stored position, the footrest is raised automatically up to the standby position. Setting of the AIR The airmassage function can be turned ON/OFF for each part of the body. If the Leg stretch function is turned ON when the footrest is in the stored position, the footrest is raised automatically. 3

24 How to use the auto course Select the Auto Course from the main menu using the buttons, and press the button. Select the desired massage course using the buttons. The desired course can be selected from 9 courses. 3 Move using the buttons. Move using the buttons. 3 4 Select the course and press the button. The auto detection of the shoulder position begins. During auto detection, lean back in the chair so that your head touches the seat back. When auto detection ends, the main menu screen changes to the massage screen and massaging starts. If you want to manually set the shoulder position, refer to To manually set the shoulder position (see page 8). The selected massage course starts. To set the mechanical/airmassage strength, function and shoulder position, refer to Adustment during massages (see page 0). In the Neck / Shoulder Course, the strength of the Waist mecha massage cannot be set. In the Waist course, the strength of the Shoulder mecha massage cannot be set. 4

25 Types of auto courses Whole Body Rejuvenation Kneading and tapping to relieve tiredness Whole Body Relax Kneading massage course Whole Body Soft Soft air massage Whole Body 7 Min Course 7 minute quick massage Neck / Shoulder Rejuvenation Neck and shoulder massage course centered on kneading and tapping to relieve the stiffness and fatigue. Neck / Shoulder Relax Neck and shoulder massage course centered on kneading. Waist Rejuvenation Waist massage course centered on kneading and tapping to relieve the stiffness and fatigue. Waist Relax Waist massage course centered on kneading. Whole Body Stretch Stretch massage course Massage Chair Sommelier 5

26 How to use the basic course Select Basic from the main menu using the buttons, and press the button Set the shoulder position. Set the desired shoulder position using the buttons. The knead balls move to the set position. Press the button to enter the shoulder position. If the button is not pressed, the operation changes automatically to the massage operation in the last selected position. The shoulder position can be selected from 9 positions. High Shoulder Position Low 3 The massage starts. 4 Select Status using the buttons while the massage screen appears, and press the button. 6

27 5 Change the Back setting to the desired settings for Type, Direction, Width, Speed and Rolling. Select the item you want to change using the buttons, and change the item using the buttons. The operation can be selected from Knead Tapping Wavelet OFF. To make numerous changes, use the the button. buttons to select the next items without pressing 6 The item displayed on the screen differs according to the selected massage operation. As for the items displayed on the screen, check the following Table of basic operation settings for the Back. When the screen. button is pressed, the screen returns to the massage If no buttons are pressed, the screen returns to the massage screen in about 0 seconds. To set the mechanical/airmassage strength, status for FOOTREST and AIR, and shoulder position, refer to Adjustments during massages (see page 0). Table of settings for the basic course for the back TYPE Knead Tapping Wavelet Off Direction Width Speed ROLLING Knead Up / Down Automatic / Wide / Normal / Narrow Automatic / Wide / Normal / Narrow Automatic / Fast / Slow Whole Body / Part / Off Automatic / Fast / Slow Whole Body / Part / Off Knead Up / Down Automatic / Fast / Slow Whole Body / Part / Off Whole Body / Part / Off Types of basic courses Knead Tapping Kneads stiff muscles Rhythmically repeated tapping to relieve muscle fatigue Wavelet Rolling Tapping and kneading to alleviate fatigue Stretches your body along the spine 7

28 How to use the expert course Select Expert from the main menu using the buttons, and press the button Select the desired massage technique from Spine, Stretch, Shoulder / Waist, Loop and 3D using the buttons, and press the button. 3 The selected massage technique is displayed. Select the desired massage technique using the buttons, and press the button Set the shoulder position. Set the massage position to the desired shoulder position using the buttons. The knead balls move to the set position. Press the button to enter the shoulder position. If the button is not pressed, the operation changes automatically to the massage operation in the last selected position. The shoulder position can be selected from 9 positions. The massage starts. High Shoulder Position Low

29 6 Select Status using the buttons while the massage screen appears, and press the button. 7 Change the BACK setting to the desired setting for Rolling from Whole Body, PART or OFF. The setting can be changed using the buttons. Rolling may not be selectable according to the selected type of massage. Check the following Table of settings for Expert Course for the Back. The massage Direction, Speed and Width cannot be adjusted. 8 When the button is pressed, the screen returns to the massage screen. If the massage chair is not operated, the screen returns to the massage screen in about 0 sec. To set the mechanical / airmassage strength, moving functions for FOOTREST and AIR and shoulder position, refer to Adjustments during massages (see page 0). Table of settings for the expert course for the back Course Type Whole Body Spine Stretch Shoulder / Waist Loop 3D Spine Care Spine Stretch Wave Rolling Stretch Stretch Knead Up Stretch Knead Down Stretch Tapping Stretch Wavelet Shoulder Blade Shoulder Care KIWAMIKnead Shoulder KIWAMITapping Shoulder KIWAMIKnead Waist KIWAMITapping Waist Loop Knead Up Loop Knead Down Loop Tapping 3D Knead Up 3D Knead Down 3D Tapping 3D Wavelet Part Off 9

30 3D Loop Shoulder / Waist Stretch Spine How to use the expert course Types of expert courses Spine Care Massages the spine at the center of the body, in ascending motion Wave Rolling Kneads the whole back Spine Stretch Massages the entire spine in ascending motion Stretch Presses up the muscles from below and massages your back while stretching Stretch Knead Down Presses down the muscles from above while massaging Stretch Wavelet Presses up the muscles from below with a delicate movement such as tapping, while kneading Stretch Knead Up Presses up the muscles from below while kneading Stretch Tapping Presses up the muscles from below while kneading in a rhythmical movement Shoulder Blade Rolls and massages the upper backside portion of shoulder blades centered on the shoulder position KIWAMIKnead Shoulder Kneads around the shoulder thoroughly from above KIWAMIKnead Waist Kneads around the waist thoroughly Loop Knead Up Kneads the muscles extensively in ascending motion Loop Tapping Massages a wide area while tapping Shoulder Care Kneads the shoulder muscle and presses the base of the shoulder and neck repeatedly with the ascending and descending motion of the kneading balls KIWAMITapping Shoulder Massages around the shoulder from above in a rhythmical movement KIWAMITapping Waist Massages around the waist in a rhythmical movement Loop Knead Down Kneads the muscles extensively in descending motion 3D Knead Up Kneads the muscles with 3D movement while applying a backandforth movement to the ascending kneading motion 3D Tapping Repeatedly taps the region in a rhythmical movement and massages the muscles with additional backandforth 3D movement 3D Knead Down Kneads the muscles with 3D movement while applying a backandforth movement to the descending kneading motion 3D Wavelet Massages the muscles with the backandforth 3D movement in addition to tapping while kneading 30

31 Settings Select Settings using the buttons, and press the button. Select the item you want to change using the buttons, and press the button. 3 Massage Strength setting Select the Configuration using the and press the button. Select the part using the buttons, select the desired massage strength using the buttons and press the button. buttons, Shoulder Position of the knead balls 3 Select Shoulder Position using the buttons, and press the button. Using the buttons, set the knead balls to the desired shoulder position. The knead balls will move set position. Press the button to enter the shoulder position. Shoulder Position If the button is not pressed, the operation changes automatically to the massage operation in the last selected position. The shoulder position can be selected from 9 positions. If you select the Shoulder Position during the massage, the massage operation stops and the kneading balls move to the shoulder position. High Low 3

32 Settings Language settings 4 Select the Language Settings using the button and press the button. Select the desired language from the English, Simple Chinese and Complex Chinese using the button, and press the button. 4 3

33 Changing massages during a massage Press the main menu. button to display the Select the massage you want using the buttons, and press the button. The selected massage starts. The timer continues to count the time. The massage of the shoulder position continues. Recommended Course Whole body rejuvenation course P8 Auto Course Choose from 9 auto courses P4 Basic Course Basic kneading and tapping massages P6 Expert Course Expert knead massages P8 33

34 Maintenance and storage Attention Keep the chair away from high temperature, high humidity and dust. Cover cloth, back pad, pillow and seat pad (made of PU leather) For leather part care, wipe it with a tight squeezed cloth which is water containing detergent. Then wipe it out with a tight squeezed cloth which is water contained. (Overuse of the massage chair may damage the cloth cover.) CAUTION Please take off a power plug from a socket for care. Do not plug in and out with wet hands. Negligence may result in electric shock or injury. Do not wipe it out with benzene, thinner or alcohol. Do not spray any chemicals on it. The use of these chemicals may cause electric shock or catch fire. Do not iron. The cloth cover may be damaged. Plastics parts For plastics parts care, Wipe them out with a tight squeezed cloth which is water containing detergent. Then wipe them out thoroughly with a dry cloth until detergent is totally removed. *Wipe the coated surface with a dry cloth. CAUTION Avoid the use of benzene, thinner, alcohol, solvents or abrasives. The user and/or chair may overturn, and may result in accidents or injuries. Remote controller To clean the remote controller, use a dry cloth. CAUTION Do not use a wet towel. injuries may occur. Storage After cleaning, keep the chair away from humidity. In case of no use over the long time, protect the chair from dust with a cover cloth. CAUTION For storage, avoid the place exposed to direct sunlight for a long time or the place of high temperature. e.g.. close to a stove. Negligence may result discoloration or deterioration of the chair. 34

35 Q&A There is difference in strength between left and right. Massaging position appears not be aligned either left and right not in parallel. Why? Displacement of knead balls Is there no problem in placing a hot carpet under the chair? Never do so. Fire may outbreak. The heat element, if damaged, may cause fire. The shoulder position does not fit in to me, even after my body shape is detected. Why? A mechanism is used to allow the two knead balls tapping alternately for making massage comfortable. As a result, a small gap may be produced in the position between them, and it may give rise to different massaging strength. This phenomenon does not come from the trouble of the chair. Are there any ways to strengthen the massage strength? Try to : Recline the backrest. Be deeply seated, and put your body weight on the backrest. Remove the back pad. Are there any ways to weaken the massage strength? Try to : Raise the seat backrest. Place a back pad or pillow. Put a blanket or leg sheet on the seat backrest. I am a patient under the treatment at a hospital. Are there any problems in using the chair? Please get your physician's advice. Massage relives the muscles' stiffness by giving pressure, and promotes blood circulation. As it may have adverse effects in certain diseases, be sure to consult your physician. The remote controller stand is unstable. Why? Tighten the fixing screws again. Should the remote controller holder be unfastened, loosen the fixing screws first, and then tighten them. Check to make sure that the remote controller stand is not unfastened. If so, tighten it with a hexagonal wrench. Fixing screw Tighten Loosen After body shape is detected, the knead balls are ought to move to the shoulder position as pre programmed. If the shoulder position still does not fit in to you, make fine adjustment for the shoulder position. (See page ) * In manual massage operations, the shoulder position is not automatically detected. Those who less than 50cm(4'9") or more than 85cm(6'")in height can use the chair, can't they? Yes, they can. There is a possibility that the body shape may not be properly detected at the shoulder position, even if it is finely adjusted. Be advised as follows: Those who are not tall : Put the backrest at the upright position, and raise the footrest. Those who are tall : Recline the backrest and lower the footrest. My arm does not reach the armrest. How can I do so? Put the backrest at the upright position, and adjust the arm position. After having airmassage of the shoulders and the arms,my skin becomes red. Why? A massage mark is likely to be left on your shoulder or arm after use. This is because of massage. It will be disappeared time by time. Please avoid shoulder exposed dress in the case of air shoulder massage. Is leg part unable to descend into the stored position? It is unable to descend into the stored position under leg air operation. Turn leg air operation "OFF". (See page ) 35

36 Q&A Q A Please tell me the dimension of the product? Please see the drawings below. Front Maximum width approximately 80mm Product width approximately 70mm Height approximately 50mm Side No reclining position In the case of reclining position Height approximately 50mm Height approximately 830mm Depth (leg part is lower position) approximately 340mm Depth (leg part is upper position) approximately 470mm Maximum depth approximately 600mm Depth (leg part is lower position) approximately 650mm Depth (leg part is upper position) approximately 750mm Maximum depth approximately 890mm 36

37 Troubleshooting You may encounter the following phenomena while in massage. As being due to the mechanical design, they have nothing to do with the product life. A "clatter" noise occurs when the knead balls go up and down. A "creak" of the gear and the motor occurs while in massage. A friction noise occurs when the knead balls rub the cover cloth (particularly while in the process of kneading.) A rattling noise occurs while in the "TAPPING" or "WAVELET" massage. (particularly when the massage moves from the shoulders to the back) In the "KNEAD", "TAPPING" or "WAVELET" massage, massaging speed may vary with the knead balls' strength changes. A noise becomes different when the massaging speed is changed. A roaring noise of the motor occurs when load is given to the chair. The compressor's noise and the air exhausting noise occur while in airmassage. A noise occurs when the air bag is inflated. A screaming noise occurs while in massage of the shoulders. A grinding noise occurs when the backrest is reclined. The knead balls are not aligned in parallel between left and right. WARNING Absolutely do not modify, disassemble or repair by yourself. Negligence may cause fire or mechanical trouble of the chair which may result in hazard on the body. (A mechanism is used to allow the two knead balls tapping alternately. As a result, a small gap may be produced in the position between them. This phenomenon is not due to the trouble of the chair.) Symptoms Check points Troubleshooting Refer to Page The chair does not start up. The chair does not operate and a beep sound is emitted continuously from the remote control. The chair does not operate and the lamp on the remote control flickers. Is the power cord plug connected? Is a power switch bottom of behind the chair turned off? It may be malfunction due to external noise. Please plug a power cord into a power socket. Please switch on the power. Set the power supply switch located under the backside of the main unit in the OFF position, unplug the power cord and then plug it back in The chair stops halfway. (The remote controller does not work.) Is the backrest in touch with the wall or the like? Is there any load given to the knead balls? (Should there be any load given to the knead balls, a safety mechanism works to stop all the functions.) Was the massage chair used continuously for a long time? Move the chair away from the wall or the like. Please turn the power switch under the left armrest on again. Take your body out of backrest for a moment. Turn the power on the bottom of behind the chair again and resume operation from the beginning. If the massage chair is used for a long time, the motor temperature rises until possibly triggering a safety device. Stop using the chair for about hour The backrest cannot be reclined. Attention Is the power cord plug connected? Is the backrest in touch with the wall or the like? Please plug the power cord into the power socket. Move the chair away from the wall or the like If the massage chair does not work normally or the same trouble occurs frequently even when the above measures are taken, set the power supply switch of the main unit in the OFF position, unplug the power cord from the outlet and ask the dealer for assistance. 37

38 Troubleshooting Inspection Inspection Important! Be sure to make inspection for longer use. Are there these symptoms? The chair emits a scorching smell. The power cord or plug is overheated. Electricity runs on or off with the power cord moved. There are some other abnormalities. Discontinue use For prevention of accident or trouble, turn the power switch OFF, disconnect the power cord plug with the receptacle, and contact your dealer. Attention When using the chair after long storage, check to make sure that it operetes properly. Accidents or injury may occur. Aftersale service When any abnormal condition persists checking in accordance with Page 37, stop the use, disconnect the power code plug from the receptacle and consult your dealer. For any other questions. If you have any questions regarding the aftersale services including repair, the warranty period, etc., please contact to your dealer. Time for retention of functional parts for repair. Functional parts for repair of this massage chair are retained six years after the termination of manufacture. The functional parts mean the parts, which are necessary to maintain the functions of product. 38

39 Specifications Product name Model number Generic name Massage Chair EC800 Electric massage chair for home use Rating Mecha (knead balls) massage speed adjustment range Air pressure for airmassage Power supply (50/60 Hz) Rated time Power consumption (50/60 Hz) Rated voltage Knead Tapping Up and down (Varies from country to country) 0 min. 30W 040V~ Slow : approx. 8 cycles/min. Fast : approx. 38 cycles/min. Slow : approx. 30 cycles/min. Fast : approx. 40 cycles/min. Approx..36 cm / sec. Approx. 48kPa Mecha (knead balls) massage strength Air massage strength Shoulder position adjustment Autotimer Seat Back Shoulder / Waist : 8step adjustment seat pad : step adjustment step adjustment 9step adjustment Approx. 5min Approx Reclining angle Footrest When air massage is on When air massage is off Approx Approx Dimensions Upright position Reclining position Approx. W70 D340 H50 (mm) Approx. W70 D890 H830 (mm) Weight Upholstery Country of Origin Approx. 76kg PU leather Made in China * Use only on the designated voltage Country Country 39

40