MICRO-TECH Europe. MICRO-TECH Colon and rectum stents. Colon and rectum stents

Transcription

1 MICRO-TECH Europe MICRO-TECH.

2 MICRO-TECH Europe Colon and rectum stents OTW. Maximum hold for maximum patient comfort. Colon stents demand a particularly high positional stability. The OTW colon and rectum stents of MICRO-TECH have a design that guarantees just that. The good hold of the OTW colon stents is achieved by a square-edged transition situated near each end of the stent. This virtually anchors the stent inside the lumen and adapts it optimally to the anatomy and peristalsis of the colon. In contrast, rectum stents are less stimulating and ball-shaped. This ensures that the patient senses less irritations in this sensitive area, thus distinctly increasing the quality of life. The partially sheathed OTW colon and rectum stents produce very high radial forces. They should therefore be placed into straight segments of the colon, and not into the bent segments, such as the right and left flexure of the colon. Specific characteristics: self-expanding Nitinol mesh with atraumatic ends anatomical design excellent positional stability high radial force resistant and elastic covering high radiopacity extraction threads for removal and repositioning guide wire-compatible up to inches also available as TTS systems Spherical end Patient-specific stents are available. We also offer customised dimensions and designs for patients in addition to special sizes as required. Simply contact us! Mushroom design

3 Successful in practical use. The stents are convincing in practice by the good opening behaviour and the special distinctive end shape of the colon stent with which the stents can be firmly anchored in the semilunar folds of the colon. In order to facilitate orientation during release, the stents have additional X-ray markings at all significant points. Control with contrast medium Released colon stent Positionally stable in all sizes. The colon and rectum stents are available in a length of either 80 mm or 100 mm. You can also choose between non-covered and partially covered versions. Colon stents Rectum stents REF Ø centre mm Ø end mm Length mm Covering mm Application End design proximal distal Stents without covering ST Ohne colon mushroom mushroom ST Ohne colon mushroom mushroom ST Ohne rectum spherical spherical ST Ohne rectum spherical spherical Stents with partial covering ST colon mushroom mushroom ST colon mushroom mushroom ST rectum spherical spherical ST rectum spherical spherical Anastomosis stents with end-to-end covering ST colon spherical spherical ST colon spherical spherical REF Ø mm/fr. Length mm Guide wire RM *1 IC *2 Lock *3 Introducer system ST / inch 2 yes yes ST /24 1, inch 2 yes yes Recommended guide wire: (colon): GW ; (rectum): GW *1 RM radiopaque markings / *2 IC irrigation channel / *3 Lock secures the introducer system during storage, transportation and introduction References ST ST Colon Nitinol stent without covering, OTW 102 Colon Nitinol stent with partial covering, OTW 109 Anastomosis stent with end-to-end covering, OTW 111 Rectum Nitinol stent without covering, OTW 112 Rectum Nitinol stent with partial covering, OTW 30 Diameter in mm 100 Length in mm Subject to errors and technical alterations.

4 Colon stents TTS. Secure placement under visual endoscopic control. Whereas OTW systems can be placed over-the-wire, TTS colon stents can be delivered though the working channel of the coloscope. This way, they can be brought much faster and easier to the affected colon segments. Owing to the visible endoscopic control during placement of the stent, release happens in an even more controlled fashion. In comparison with OTW colon and rectum stents, TTS stents are especially flexible and better suited for the curved segments of the colon, e.g. the right and left flexure of the colon. Specific characteristics: Patient-specific stents are available. We also offer customised dimensions and designs for patients in addition to special sizes as required. Simply contact us! self-expanding Nitinol wire mesh with atraumatic ends flexible and positionally stable high radiopacity owing to 10 additional radiopaque markers extraction filaments for removal and repositioning guide wire passable up to inches X-ray marking Extraction threads

5 Always in ideal shape. As a standard among TTS colon stents, you can choose from three different lengths: 80, 100, and 120 mm in case of stents without covering. In all other versions the working diameter amounts to 25mm and to 30mm at the ends. The introducer system for MICRO-TECH TTS colon stents has a diameter of 10 fr. (= 3.3 mm). It therefore fits to all working channels having a diameter of at least 3.6 mm. Recommended guide wire. For stent introduction, we recommend the extremely rigid and bending-resistant guide wire equipped with a 15cm-long radiopaque and hydrophilic tip GW REF Ø centre mm Ø end mm Length mm Covering mm Einsatz end-design Proximal Distal Stents without covering ST without colon spherical spherical ST without colon spherical spherical ST without colon spherical spherical REF Ø mm/fr. Length mm Guide wire RM *1 IC *2 Lock *3 Introducer system ST /10 2, inch 2 yes yes Recommended guide wire: GW extra stiff *1 RM radiopaque markings / *2 IC irrigation channel / *3 Lock secures the introducer system during storage, transportation and introduction References ST ST Colon Nitinol stent without covering, TTS 25 Diameter in mm 080 Length in mm Subject to errors and technical alterations.

6 MICRO-TECH Europe Subject to errors and technical alterations. Rev 02/2013 MICRO-TECH (Nanjing) Co., Ltd, No. 10, Gaoke Third Road National Hi-tech Industrial Development Zone Nanjing, China MICRO-TECH Europe GmbH Mündelheimer Weg Düsseldorf Germany Phone: +49 (0) Fax: +49 (0)