BML-BL-BFL LOCK NUTS (FLANGED) STANDARD SERIES SW H. Thread Type. H mm. SW mm. Box/Min.OQ. Inner Pack. Metric Thread (Attachment thread : EN 60423)
|
|
|
- Kelley Garrett
- 6 years ago
- Views:
Transcription
1 STANAR SERIES LOCK NUTS (FLANGE) Lock Nut Flammability Operating Temperature Permanent Intermittent BMLBLBFL Polyamide, 0% Glass Fibre Reinforced UL 9 B 0 C up to + C 0 C up to +1 C Remarks Manufactured according to the requirements of IN 0 SW mm Metric (Attachment thread : EN 0) M1x1, M1x1, Mx1, M0x1, Mx1, Mx1, Pg (Attachment thread : IN 00) Pg Pg 9 Pg 11 Pg 1, Pg 1 Pg 1 Pg 9 Pg Pg Pg G(R) (Attachment thread : IN ISO ) G /" G 1/" SW mm mm Ral 001 Ral 0 Ral 900 Box/Min.OQ ,,,,1,,1, BML0S BML01 BML0 BML0 BML0 BML0 BML0 BML0 BML1S BML11 BML1 BML1 BML1 BML1 BML1 BML1 BMLS BML1 BML BML BML BML BML BML ,0,0 BL01 BL0 BL0 BL0 BL0 BL0 BL0 BL0 BL09 BL BL11 BL1 BL1 BL1 BL1 BL1 BL1 BL1 BL19 BL0 BL1 BL BL BL BL BL BL BL BL9 BL ,,, BFL01 BFL0 BFL0 BFL0 BFL11 BFL1 BFL1 BFL1 BFL1 BFL BFL BFL
2 LOCK NUTS (WITOUT FLANGE) Lock Nut Flammability Operating Temperature Permanent Intermittent Polyamide, 0% Glass Fibre Reinforced UL 9 B 0 C up to + C 0 C up to +1 C Remarks Manufactured according to the requirements of IN 0 STANAR SERIES BLMNBLN SW mm Metric (Attachment thread : EN 0) M1x1, M1x1, Mx1, M0x1, Mx1, Mx1, Pg (Attachment thread : IN 00) Pg Pg 9 Pg 11 Pg 1, Pg 1 Pg 1 Pg 9 Pg Pg Pg SW mm mm Ral 001 Ral 0 Ral 900 Box/Min.OQ ,,,,1,,1, BLMN0S BLMN01 BLMN0 BLMN0 BLMN0 BLMN0 BLMN0 BLMN0 BLMN1S BLMN11 BLMN1 BLMN1 BLMN1 BLMN1 BLMN1 BLMN1 BLMNS BLMN1 BLMN BLMN BLMN BLMN BLMN BLMN ,0,0,0 BLN01 BLN0 BLN0 BLN0 BLN0 BLN0 BLN0 BLN0 BLN09 BLN BLN11 BLN1 BLN1 BLN1 BLN1 BLN1 BLN1 BLN1 BLN19 BLN0 BLN1 BLN BLN BLN BLN BLN BLN BLN BLN9 BLN
3 STANAR SERIES ROUN BLIN STOPS Blind Flammability Operating Temperature Permanent Intermittent BMBSBBS PA (Polyamide ) V (According to UL 9) 0 C up to + C 0 C up to +1 C Remarks Manufactured according to the requirements of IN 0 TL 1 T (T) mm Metric (Attachment thread : EN 0) M1x1,, M1x1, 11, 1, 1 Mx1, M0x1, 1, Mx1, Pg (Attachment thread : IN 00) Pg Pg 9, Pg 11, Pg 1,, Pg 1 Pg 1 1,0 Pg 9 11, Pg mm 1 mm TL Ral 001 Ral 0 Ral 900 Box/Min.OQ 1 0,0 0,0 11,0 1, BMBS0S(Y) BMBS01(Y) BMBS0(Y) BMBS0(Y) BMBS0(Y) BMBS0(Y) BMBS0(Y) BMBS1S(Y) BMBS11(Y) BMBS1(Y) BMBS1(Y) BMBS1(Y) BMBS1(Y) BMBS1(Y) BMBSS(Y) BMBS1(Y) BMBS(Y) BMBS(Y) BMBS(Y) BMBS(Y) BMBS(Y) ,0 11, 1 1 1,,,, BBS01(Y) BBS0(Y) BBS0(Y) BBS0(Y) BBS0(Y) BBS0(Y) BBS0(Y) BBS0(Y) BBS11(Y) BBS1(Y) BBS1(Y) BBS1(Y) BBS1(Y) BBS1(Y) BBS1(Y) BBS1(Y) BBS1(Y) BBS(Y) BBS(Y) BBS(Y) BBS(Y) BBS(Y) BBS(Y) BBS(Y)
4 EXAGONAL BLIN STOPS Blind Flammability Operating Temperature Permanent Intermittent PA (Polyamide ) V (According to UL 9) 0 C up to + C 0 C up to +1 C Remarks Manufactured according to the requirements of IN 0 STANAR SERIES BMBS(A) e SW E TL d T d mm TL mm E mm Metric (Attachment thread : EN 0) M1x1, 1,0 M1x1, 11,0, 1 11,0 1, 1,0 1 1,, 1 Mx1,, 1, M0x1, 0,0 1, Mx1, 0,0 1 9, Mx1,,0 1 9, e mm,,,, mm 1 1, 19, 1 1 1,0 1, 0,,,, mm SW mm 1 1,0 19 1,, 0,0 9 Ral 001 BMBS0S (A) BMBS01 (A) TL1 BMBS01 (A) TL1 BMBS0 (A) TL11 BMBS0 (A) TL1 BMBS0 (A) TL1 BMBS0 (A) TL BMBS0 (A) TL1 BMBS0 (A) BMBS0 (A) BMBS0 (A) BMBS0 (A) Ral 0 BMBS1S (A) BMBS11 (A) TL1 BMBS11 (A) TL1 BMBS1 (A) TL11 BMBS1 (A) TL1 BMBS1 (A) TL1 BMBS1 (A) TL BMBS1 (A) TL1 BMBS1 (A) BMBS1 (A) BMBS1 (A) BMBS1 (A) Ral 900 BMBSS (A) BMBS1 (A) TL1 BMBS1 (A) TL1 BMBS (A) TL11 BMBS (A) TL1 BMBS (A) TL1 BMBS (A) TL BMBS (A) TL1 BMBS (A) BMBS (A) BMBS (A) BMBS (A) Box/Min.OQ
5 STANAR SERIES PROTECTION TABS Blind Flammability Operating Temperature Permanent Intermittent BPMBPT PA (Polyamide ) V (According to UL 9) 0 C up to + C 0 C up to +1 C Remarks Manufactured according to the requirements of IN 0 h d d mm h mm mm mm Metric (Attachment thread : EN 0) Pg (Attachment thread : IN 00) Pg /M1x1, 9, Pg 9/M1x1, (EU), 1 Pg 11/M1x1,, 1, 0, Pg 1,/ 1,0 1 1 Pg 1/ 1,, 1 1, Pg 1/ (EU) 1, 0,0 1, Pg 1/ 1,0 1,0 Pg 9/Mx1, (EU) 0, 1,0 Pg 9/Mx1,, Pg /M0x1, (EU), Pg /M0x1,,,, Pg /Mx1, 1, Pg /Mx1, 1,0 Ral 900 BPMS/BPT1 BPME1/BPT BPM1/BPT BPM/BPT BPML/BPT BPME/BPT BPM/BPT BPME/BPT BPM/BPT BPME/BPT BPM/BPT BPM/BPT9 BPM/BPT0 Ral 0 BPM1S/BPT11 BPME11/BPT1 BPM11/BPT1 BPM1/BPT1 BPM1L/BPT1 BPME1/BPT1 BPM1/BPT1 BPME1/BPT1 BPM1/BPT1 BPME1/BPT1 BPM1/BPT1 BPM1/BPT19 BPM1/BPT0 Ral 001 BPM0S/BPT01 BPME01/BPT0 BPM01/BPT0 BPM0/BPT0 BPM0L/BPT0 BPME0/ BPM0/BPT0 BPME0 BPM0/BPT0 BPME0 BPM0/BPT0 BPM0/BPT09 BPM0/BPT Box/Min.OQ
6 Lock Nut STANAR SERIES LOCK NUTS BMBLBSLBPFL Brass, Nickel plated SW SW mm Metric (Attachment thread : EN 0) M1X1, 1 M1X1, 19 M0X1, MX1, 0 MX1, M0X1, MX1, 0 MX1, 0 MX,0 MX,0 0 M0X,0 90 MX,0 9 M90X,0 Pg (Attachment thread : IN 00) Pg 1 Pg 9 1 Pg 11 1 Pg 1, Pg 1 Pg 1 Pg 9 1 Pg 1 Pg 0 Pg G(Pf) (Attachment thread : IN ISO ) G /" G 1/" mm mm,, 1, 1,0 9, 1,0 9, 99,, 11,0 BMBL01 BMBL0 BMBL0 BMBL0 BMBL0 BMBL0 BMBL0 BMBL0 BMBL09 BMBL BMBL11 BMBL1 BMBL1,,,, 1, 0,0,,, 0, BSL01 BSL0 BSL0 BSL0 BSL0 BSL0 BSL0 BSL0 BSL09 BSL, 0,0 BPFL01 BPFL0 BPFL0 BPFL0
7 BMELBSEL EMC SERIES LOCK NUTS Lock Nut Brass, Nickel plated Remarks Special design shape for painted enclosures. SW SW mm Metric (Attachment thread : EN 0) M1X1, M1X1, M0X1, MX1, MX1, M0X1, MX1, MX1, Pg (Attachment thread : IN 00) Pg Pg1, Pg1 Pg1 Pg Pg Pg mm mm ,,,,,,, 1, 1,0 9, 1,0 BMEL01 BMEL0 BMEL0 BMEL0 BMEL0 BMEL0 BMEL0 BMEL ,,,,,,,,,1 1, 0,0,,, 0, BSEL01 BSEL0 BSEL0 BSEL0 BSEL0 BSEL0 BSEL0 BSEL0 BSEL09 BSEL
8 ENLARGERS Enlarger Attachment Metric Pg STANAR SERIES PPEMPEMME Brass, Nickel plated EN 0 IN 00 O IT Index Explanations O Outer diameter I Inner diameter OT Outer thread IT Inner thread OTL Outer thread lenght ITL Inner thread lenght eight ITL OTL I OT OT PgPg Pg Pg1, Pg1, Pg1 Pg1 Pg1 Pg Pg MetricPg M1x1, M1x1, Mx1, M0x1, Mx1, Mx1, MetricMetric M1x1, M1x1, Mx1, M0x1, Mx1, IT ITL mm OTL mm mm O mm I mm Pg1, Pg1, Pg1 Pg1 Pg1 Pg1 Pg1 Pg Pg Pg,,,,, 1 1, 1 19, 1 1 1, 1, 1, 1,0 1 1,0 1,0, 1,0 1 0,0,0,0 0,0 0,0 0,0,0 9, 11, 11, 1, 1, 1, 1, 1, 1, 1, 9, PPE01 PPE0 PPE0 PPE0 PPE0 PPE0 PPE0 PPE0 PPE09 PPE PPE11 PPE1 PPE1 PPE Pg1 Pg1 Pg Pg Pg,, 9, 1 1 1, 1,, 1,0 1 0,0 0,0,0 11, 1 0,0, 0,,, MPE01 MPE0 MPE0 MPE0 MPE0 MPE0 MPE0 MPE M1x1, Mx1, M0x1, Mx1, Mx1,,, 9, 1 1, 1, 19,,, 1, 1,0,0 11, 1 0,0, 0,, MME01 MME0 MME0 MME0 MME0 MME0 MME
9 PPRPMRMMR STANAR SERIES REUCERS Enlarger Brass, Nickel plated Attachment Metric Pg EN 0 IN 00 O Index Explanations O Outer diameter OT Outer thread IT Inner thread OTL Outer thread lenght ITL Inner thread lenght ITL OTL I OT OT PgPg Pg1, Pg1, Pg1, Pg1 Pg1 Pg1 Pg1 Pg1 Pg1 Pg1 Pg Pg Pg Pg Pg Pg PgMetric Pg1 Pg1 Pg1 MetricMetric M1x1, Mx1, Mx1, M0x1, M0x1, Mx1, Mx1, Mx1, Mx1, IT ITL mm OTL mm O mm Pg Pg Pg Pg Pg1, Pg1, Pg1 Pg1, Pg1 Pg1 Pg1 Pg Pg Pg,,, 9, 9, 9, 9, 11, 11, 11, 1, 1, 1 0,0 0,0,0,0,0 0,0 0,0 0,0,0,0 PPR01 PPR0 PPR0 PPR0 PPR0 PPR0 PPR0 PPR0 PPR09 PPR PPR11 PPR1 PPR1 PPR1 PPR1 PPR1 PPR1 PPR1 PPR19 PPR0 PPR1 PPR , 11, 1 0,0 0,0 PMR01 PMR0 PMR0 PMR0 0 0 M1x1, M1x1, M1x1, M1x1, Mx1, Mx1, M0x1, M0x1, Mx1,, 9, 11, 11, 1, 1, 1,0,0 0,0 0,0,0,0 MMR01 MMR0 MMR0 MMR0 MMR0 MMR0 MMR0 MMR0 MMR09 MMR MMR11 MMR1 MMR
10 REUCING SEALS (SINGLE) Seal Color CUSTOMER ORIENTE PROUCTS MS Silicone rubber, NBR, chloroprene rubber, EPM rubber or other according requirements. Black, Red, Transparent. d Cable Gland Size Code For Bimed Glands Clamping Range Ø minmax mm mm d mm mm,1 PG M1x1, NPT 1/" G 1/" MS0S,0,, PG 9 M1x1, (EU) MS01,0,,, M1x1, NPT /" G /" MS01L 1,,,1 PG 1, NPT 1/" G 1/" MS0 1 9,,1 PG 1 NPT 1/" G 1/" MS0L 1,0 1 1, 9, PG 1 NPT /" MS0 1,9 1, 1, (EU) MS0L 1 0, 1,, PG 9 Mx1, MS0 1,0 0,0 0, 0, Mx1, (EU) MS0L 11,0 1, 1, 1, PG M0x1, NPT 1 1/" G 1 1/" MS0 0,0 0,0 1, PG M0x1, (EU) MS0L 1,, 1 Mx1, NPT 1 1/" G 1 1/" MS0 1,0 1, 1 PG Mx1, NPT " G " MS0 1,0, 1
11 MS CUSTOMER ORIENTE PROUCTS REUCING SEAL (OUBLE) Seal Silicone rubber, NBR, chloroprene rubber, EPM rubber or other according requirements. Black, Red, Transparent. Color g h d1 d Cable Gland Size Code mm d mm d1 mm For Bime Glands Clamping Range Ø minmax mm h mm g mm mm 9,1 PG M1x1, NPT 1/" G 1/" MS0S,,,,0,1,0 PG 9 M1x1, (EU) MS01,,,,,0 9, M1x1, NPT /" G /" MS01L 1,,,,1,0 1,1 PG 1, NPT 1/" G 1/" MS0 1 1,,,,,0, PG 1 NPT 1/" G 1/" MS0L 1 1, 11, 11,0 9,,0 11, PG 1 NPT /" MS0,9 1, 1, 1,, 1, (EU) MS0L 0, 1, 1, 1,, 1, PG 9 Mx1, MS0 0,, 0, 1 0,0, 1 Mx1, (EU) MS0L, 1, 1, 11,0 1 1,, 1, PG M0x1, NPT 1 1/" G 1 1/" MS0 0,0, 0,0 1, 19, M0x1, (EU) MS0L,, 1, 1 1,0 1, 19, PG Mx1, NPT 1 1/" G 1 1/" MS0 1, 1,0 1,0 1, 0, PG Mx1, NPT " G " MS0 1,0, 1, 1,
12 FLAT CABLE SEALS Seal Color CUSTOMER ORIENTE PROUCTS MFS NBR or Silicone Black or Red A B d1 Cable Gland Size Code mm mm A mm B mm d1 mm PG 1 NPT /" MFS0,9 1, 1, 1, PG 9 Mx1, MFS0 0, 1,, PG 9 Mx1, MFS0L 0,,0,, PG M0x1, NPT 1 1/" G 1 1/" MFS0 0,0 1 1,0 11,0 PG M0x1, NPT 1 1/" G 1 1/" MFS0L 0,0 1 1,0, PG Mx1, NPT " G " MFS0 1,0 1,,, PG Mx1, NPT " G " MFS0M 1,0 1, 11,0, PG Mx1, NPT " G " MFS0L 1,0 1, 1,,
13 CUSTOMER ORIENTE PROUCTS MULTIOLE SEALS Seal Color MMS NBR Black Ø d1 e x (n) Ød Cable Gland Code mm n e mm mm d1 mm d mm PG 9 M1x1, (EU) MMS011,9,, PG 9 M1x1, (EU) MMS01,9,, PG 9 M1x1, (EU) MMS01,9,, M1x1, NPT /" G /" MMS01 1,,1,, M1x1, NPT /" G /" MMS01 1,,,1,, M1x1, NPT /" G /" MMS01 1,,0,1,, M1x1, NPT /" G /" MMS01 1,,1,, M1x1, NPT /" G /" MMS01 1,,1, M1x1, NPT /" G /" MMS019 1,,1,, PG 1, NPT 1/" G 1/" MMS01 1, 1,, PG 1, NPT 1/" G 1/" MMS0 1, 1, PG 1, NPT 1/" G 1/" MMS0 1, 1, PG 1, NPT 1/" G 1/" MMS0 1, 1, PG 1, NPT 1/" G 1/" MMS0 1, 1, PG 1, NPT 1/" G 1/" MMS0 1, 1, PG 1 NPT 1/" G 1/" MMS0 1 9, 1,, PG 1 NPT 1/" G 1/" MMS0 1 9, 1,, PG 1 NPT 1/" G 1/" MMS09 1 9, 1,, PG 1 NPT 1/" G 1/" MMS0A 1 9, 1, PG 1 NPT 1/" G 1/" MMS0B 1 9, 1,, PG 1 NPT 1/" G 1/" MMS0C 1 9, 1,, PG 1 NPT 1/" G 1/" MMS0 1 9, 1,, PG 1 NPT 1/" G 1/" MMS0E 1 9, 1,, PG 1 NPT /" MMS01,9 1, 1, 9, PG 1 NPT /" MMS0,9, 1, 1, 9, PG 1 NPT /" MMS0,9 1, 1, 11 PG 1 NPT /" MMS0,9 1, 1, 9, PG 1 NPT /" MMS0,9 1, 1, 9, PG 1 NPT /" MMS0,9, 1, 1, 11, PG 1 NPT /" MMS0,9 1, 1,, PG 1 NPT /" MMS0,9 1, 1, 1, PG 1 NPT /" MMS09,9, 1, 1, 11 PG 1 NPT /" MMS0A,9 1, 1, 11, PG 1 NPT /" MMS0B,9 1, 1, 1,,1 (EU) MMS0C 0,, 1,, (EU) MMS0 0,, 1,,
14 MULTIOLE SEALS Seal Color CUSTOMER ORIENTE PROUCTS MMS NBR Black Ø d1 e x (n) Ød Cable Gland Code mm n e mm mm d1 mm d mm (EU) MMS0E 0,, 1, 1,9 (EU) MMS0F 0,, 1,, (EU) MMS0G 0,, 1, 11, (EU) MMS0 0,, 1, 1,9 (EU) MMS0I 0,, 1, 1, (EU) MMS0J 0,, 1, 1, PG 9 Mx1, MMS01 0,,, PG 9 Mx1, MMS0 0,, 1, PG 9 Mx1, MMS0 0,,, 1, PG 9 Mx1, MMS0 0,, 1, PG 9 Mx1, MMS0 0,, 1, PG 9 Mx1, MMS0 0,,, 1, PG 9 Mx1, MMS0 0,, 1, PG 9 Mx1, MMS0 0,,, 1 PG 9 Mx1, MMS09 0,, 1 Mx1, (EU) MMS0A, 1, 1,, Mx1, (EU) MMS0B, 1, 1,, Mx1, (EU) MMS0C, 1, 1,, Mx1, (EU) MMS0, 1, 1, 11, Mx1, (EU) MMS0E, 1, 1, 1, Mx1, (EU) MMS0F, 1, 1, 1 Mx1, (EU) MMS0, 1, 1, 1, Mx1, (EU) MMS0I, 1, 1, 1, Mx1, (EU) MMS0J, 1, 1, 1, Mx1, (EU) MMS0K, 1, 1, 1 Mx1, (EU) MMS0L, 9 1, 1, 1,9 Mx1, (EU) MMS0M, 1, 1, 1,9 Mx1, (EU) MMS0N, 1, 1, 1,9 Mx1, (EU) MMS0O, 9 1, 1, 1,9 M0x1, (EU) MMS01, 1, 1,9 M0x1, (EU) MMS0, 1, 1, M0x1, (EU) MMS0, 1, 19, M0x1, (EU) MMS0, 1, 1,1 M0x1, (EU) MMS0, 1, 1,1 M0x1, (EU) MMS0, 1, 19, M0x1, (EU) MMS0, 1, 0, M0x1, (EU) MMS0, 9 1, 1,
15 BGW CUSTOMER ORIENTE PROUCTS GLAN WRECES Wrench Brass, Nickel plated Benefits ighdensity installations. Lower installation time. Reduced tooling costs. Standard for all sizes. Features Unique slim socket design. Easy to use selfratchet design. One socket rive bar drive 1/" (, mm) Tightens and releases glands Fits one size This unique patent pending wrench can be used even in the applications with a high density of glands side by side.the wrench is self ratcheting so you can lock or unlock the glands very easily.the tool fits to a standard handle bar and one handle bar could be used for all our wrench tools. E C A B A mm B mm C mm E mm BGW 1 SW 1, 19, BGW 1 SW 1, 0, BGW 1 SW 1, 0, BGW 19 SW 19,, BGW 0 SW 0 1,0, BGW SW,,1 BGW SW,, BGW SW 0 1,0, BGW 9 SW 9 1, BGW 0 SW 0, BGW SW,0, BGW SW,,9 BGW SW,, Screwing Position Unscrewing Position
C O M P R E H E N S I V E S A F E T Y W I T H A T E X B Y C O N T R O L W E L L
C O M P R E H E N S I V E S A F E T Y W I T H A T E X B Y C O N T R O L W E L L The current international regulations for machine manufacturers (94/9/EC) and operators (99/9/EC) prescribe high safety levels.
ADAPTER IECEx-ATEX, RNC, IP66 / 68, NICKEL PLATED BRASS
ADAPTER IECEx-ATEX, RNC, IP66 / 68, NICKEL PLATED BRASS Anamet IECEx-ATEX adapter fitting, type RNC and RAC, nickel plated brass Type RNC IECEx-ATEX approved 45 or 90 nickel plated brass adapter, male
Company. Our. Our product range consists of the following groups:
Our Company Bimed begun in 1978 as a manufacturer of medical and mechanical components. Today Bimed is a family owned organization with more than 300 people and a 20,000 square meter facility. The Istanbul,
In-Line Accessories. In-Line Pressure Gauges. Pressure Gauges. In-Line Accessories
Pressure Gauges Pressure gauges for monitoring system pressure Hoses and test points for sampling oil and determining ISO cleanliness levels Flanges to connect components Valves for system control In-Line
Mechanically actuated valves
Mechanically actuated valves /2-5/2 spool valves with /8 NPT threaded ports Installation in any position Comprehensive range of actuations, direct or servo-piloted Special versions on request Materials
P SERIES. 250 psi NFPA Pneumatic Cylinder TECHNICAL BROCHURE. Bore Sizes from 11/2 to 14
Actuation Solutions and Systems for the P SERIES 250 psi NFPA Pneumatic Cylinder Bore Sizes from 11/2 to 14 Actuation Solutions and Systems for the Design & Materials Temperature Ratings Low Temp. -54
RATCHETS RATCHET ACCESSORIES DENTAL PRODUCTS PRODUCT CATALOG A company of the KLINGEL GROUP
RATCHETS RATCHET ACCESSORIES DENTAL PRODUCTS PRODUCT CATALOG 0 A company of the KLINGEL GROUP Contents Universal ratchet without torque function General information All ratchets are available with different
747 Series Stopper Plugs Cable Gland Accessories Flameproof.
747 Series Stopper Plugs Flameproof. Class I, Groups, A, B, C, D Type 4X; Ex d II Component Equipment Stopper plug is designed for use from the outside of the Idea for use on flameproof electrical equipment
type AKS and ESM Introduction
Temperature sensors type AKS and ESM Introduction Temperature sensors AKS and ESM are temperature dependent resistance sensors. The sensor unit consists of a platinum element the resistance value of which
Needle Valves. We deliver confidence through quality products
We deliver confidence through quality products INTRODUCTION NEEDLE VALVES SD range of Needle valves come in various sizes, sealing styles, end connections and stem types. They are available in bar stock
Polyester distribution boxes
for Zone and Zone Description have been of great advantage in many industrial plants. They offer safe protection even when they are exposed to extreme environmental conditions, aggressive chemical media
The Custom Interconnect Leader
QC Series 1.24 (31.5) 0.93 TYP (23.6) 0.180 (4.6) 0.413 (10.5) 0.112 (2.8) Figure 1: Standard 1.25" Mounting ELECTRICAL Nominal Impedance: Frequency Range: Voltage Rating: Dielectric Withstanding Voltage:
Accessories for LV AirGuard Cables Glands, Connectors and Installation Tools.
Accessories for LV AirGuard Cables Glands, Connectors and Installation Tools. A Non-Potted Gland TECHNICAL DATA Design Specification BS 6121:Part 1:1989, IEC 62444, EN 62444 Mechanical Classifications*
Installation, operation and service manual BMA 05
BMA 05 Please read this manual carefully before installing and using the BMA 05 safe measuring coupling. Wigersma & Sikkema warranty obligations do not apply in case of non-observance of this manual. 1
DEBSON TM2 OXYGEN THERAPY FLOWMETERS WITH PRE ADJUSTED FLOWRATES. English version 09/2015
DEBSON TM2 English version 09/2015 RAIL MOUNTING SYSTEMS 2 DIRECT PROBES 3 DEBSON TM2 The DEBSON TM2 is used to set the of a gas that is to be delivered to patients through the respiratory tract. It is
Implant Mountless Package Handling. Instructions for Use
Implant Mountless Package Handling Instructions for Use Implant Mountless Package Handling Each implant is packaged in a carton box labelled Mountless. Two peel-off labels inside the carton can be affixed
We have simplified the. for you! Just a few steps to the articulator system of your choice! choose the perfect articulator for you!
A rticu l ato r s a n d Acc es s o r i es 13 SAM K I T SYS T EM All SAM articulators will be delivered with the same standard equipment from April 2007 on, that is curvature 1 white (with shallow curvature)
TECHNICAL CHARACTERISTICS BEHAVIOUR WITH CHEMICAL AND ATMOSPHERIC AGENTS
LE GLNS able glands and plastic accessories Regulatory ompliance: able Glands: EN 50262; IE 62444 Metric pitch: IE/EN 60243 PG pitch: IN 40430 ouplings and cable glands: EN 61386-1 e EN 60670-1 as applicable
SAFETY LABELS CAUTION: PINCH POINT. Make sure locking pin is fully engaged before beginning forward and side lift exercises.
CONTENTS 3 Important Safety Information 4 Assembly Instructions 6 Adjusting the Seat 6 Getting On and Off the Ab Coaster Pro 7 Ab Coaster Pro Exercises a. Forward Lift b. Side Lift (Obliques) c. Free-Style
CABLE ENTRY SYSTEMS AND ACCESSORIES JACOB AT A GLANCE
CABLE ENTRY SYSTEMS AND ACCESSORIES JACOB AT A GLANCE ÜBER UNS II ABOUT US TRADITION IST EIN BEKENNTNIS. FORTSCHRITT EINE ENTSCHEIDUNG. Dafür steht die Jacob GmbH mit Sitz in Kernen bei Stuttgart: Ein
NETAFIM FLEXIBLE PIPES FLATNET
NETAFIM FLEXIBLE PIPES FLATNET REINFORCED POLYETHYLENE FLEXIBLE PIPE & FITTINGS APPLICATIONS For use in agricultural, horticultural and other portable water application systems. SPECIFICATIONS Available
12 series (Pneufit) Push-in fittings Ø 1/8... 1/2, Ø mm tube size, BSP and NPT threads
2 series (Pneufit) Push-in fittings Ø /8... /2, Ø 4... 2 mm tube size, SP and NPT threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage ll taper
(all beam angles defined as, -3dB or half power inclusive)
Transducers Transducers: Standard Range Encapsulated ATEX ( EEx m) for zones 1 and 2 as standard On NPT threaded versions, FM Class I, Div 1, Group A, B, C and D. Class II, Div 1, Group E, F and G. Class
FITTINGS. Pneufit C composite and Pneufit M fittings Inch Ø 1/8" to 1/2" O/D tube
Pneufit C composite and Pneufit M fittings Ø 1/8" to 1/2" Ready to use. Over 1,000 composite push-in pneumatic fittings. Releasable stainless-steel grab-ring to grip nylon or polyurethane (8 or 9 durometer).
BROEN UNIFLEX FITTINGS FOR NON-BURNING 2.0 GASES / VACUUM
BROEN UNIFLEX FITTINGS FOR NON-BURNING 2.0 GASES / ACUUM LAB TABLE OF CONTENTS Content Page Table of Content 2 Product Overview 3 BROEN UniFlex TM BASIC 4-5 Fittings for Non-burnig 2.0 Gases/acuum Turret
BUSHINGS: GENERAL INFORMATION
BUSHINGS: GENERAL INFORMATION 1.0 Electrical characteristics (Ir = rated current; Ur = rated voltage) 1.1Standard insulation levels Rated voltage Ur kv (r.m.s.) 1 3,6 12 24 36 52 One minute power frequency
SUMMARY UNITS INTRODUCTION PAGE 2-4 KEY TO CODES PAGE 2-7 FILTER PAGE 2-8 DEPURATOR PAGE 2-11 ACTIVE CARBON FILTER PAGE 2-14.
SUMMARY INTRODUCTION PAGE - KEY TO CODES PAGE -7 FILTER PAGE -8 DEPURATOR PAGE - SUMMARY Syntesi ACTIVE CARBON FILTER PAGE - REGULATOR PAGE -7 IN-SERIES REGULATOR PAGE - FILTER-REGULATOR PAGE - LUBRICATOR
Impact resistant PBT body in black for Pneufit C and light gray for Pneufit M.
Pneufit C composite and Pneufit M fittings Ø Â" to Ë" Ready to use. Over 1,000 composite push-in pneumatic fittings. Releasable stainless-steel grab-ring to grip nylon or polyurethane (85 or 95 durometer).
Installation, operation and service manual BMA 04
BMA 04 Please read this manual carefully before installing and using the BMA 04 safe measuring coupling. Wigersma & Sikkema warranty obligations do not apply in case of non-observance of this manual. 1
Union Bonnet Valves - VU6 Series
BlowOur Proof Back Seating Hardened Stem Thread Mountable Panel nut Metal Seal Bonnet Union Bonnet Valves VU6 Series Features Pressure rating up to 6000psig (13bar) @38 C (100 F) Temperature rating from
Ball Valves. BV & BT Series. Features. Pressure vs. Temperature. Technical Data. Pressure Ratings
Ball Valves & Series Features Any end type and size combination available upon request Adjustable stem seal can be maintained in-line Panel mountable Bi-directional flow All valves are 00% factory tested
RiGO801 Laboratory Requirements
RiGO801 Laboratory Requirements 2015-11-25 Air Conditioning According to EN 13032 1 and LM-79-08 the temperature in the environment of the DUT needs to be 25 C +/- 1 C during the measurement. EN 13032-4
SWITCHGEAR PBD. fuse bases
SWITCHGEAR PBD fuse bases designed for distribution of electricity and protection of electrical equipment against short-circuits and overloads with industrial fuse links ENERGY SAFELY SWITCHED SWITCHGEAR
SWITCHGEAR PBD. fuse bases
SWITCHGEAR PBD fuse bases designed for distribution of electricity and protection of electrical equipment against short-circuits and overloads with industrial fuse links ENERGY SAFELY SWITCHED SWITCHGEAR
STRUKTURA T01-A INSTALLATION INSTRUCTIONS TOP INLET AND REAR INLET FLOOR STANDING URINAL K-5889T-ER/K-5889T-ET
STRUKTURA INSTALLATION INSTRUCTIONS TOP INLET AND REAR INLET FLOOR STANDING URINAL K-5889T-ER/K-5889T-ET BEFORE YOU BEGIN Please read these instructions carefully to familiarize yourself with the required
In-Line Check Valves. Features. Valves. Working Pressures to: Flow Ranges to:
Valves In-Line Check Valves Working Pressures to: Flow Ranges to: 5700 psi/393 bar 200 gpm 757 lpm Features Steel constructed check valves are compatible with all non-corrosive liquids. Valves contain
Applications. Projected Area: 1.9 Sq. Ft. Dimensions in Inches/Millimeters
NEC/CEC: Applications Powerful, efficient weatherproof lighting for medium and large areas such as: Shopping malls Parking lots Sports areas New-car lot lighting Security lighting Industrial process lighting
USER'S MANUAL QUESTIONS? CAUTION. Model No. WEEVSY Serial No. Write the serial number in the space above for reference.
Model No. WEEVSY30810.0 Serial No. Write the serial number in the space above for reference. USER'S MANUAL Serial Number Decal (under the seat) QUESTIONS? If you have questions, or if there are missing
MEDICAL GAS FITTINGS & CONNECTIONS Quick Reference Guide
MEDICAL GAS FITTINGS & CONNECTIONS Quick Reference Guide www.baycorporation.com ISO 9001 ISO 13485 Follow us: 867 Canterbury Rd., Westlake, OH 44145 USA P: 440.835.2212 888.835.3800 F: 440.835.1377 E:
Intramedullary Nail Systems
Intramedullary Nail Systems TianJin ZhengTian Medical Instrument Co., td. A Company of NATON Medical Group Facility Add: East of Guihuazhi oad, West of Jingyi oad, Airport Economic Zone, Tianjin, 0008,
Goniometer series 400
User s Manual Huber Diffraktionstechnik GmbH & Co. KG Sommerstrasse 4 D - 83253 Rimsting Phone +49 (0) 8501 6878-0 Fax +49 (0) 8051 6878-10 info@xhuber.com www.xhuber.com series 400 Manual 400_en-A05 2005
R-Group Finland Oy. RLS Lifting Sockets Technical Manual According to Eurocodes, EU Machinery directive 2006/42/EC and VDI/BV-BS 6205 CE Approved
R-Group Finland Oy RLS Lifting Sockets Technical Manual According to Eurocodes, EU Machinery directive 2006/42/EC and VDI/BV-BS 6205 CE Approved 9.1.2017 2 Table of Contents 1 DESCRIPTION OF THE SYSTEM...
accurate perception. Stethoscopes
Sensitivity is the basis of accurate perception. Stethoscopes stethoscopes Riester Stethoscopes there s simply more to hear. Since 1948 the name Riester has stood for the highest quality products, wide-ranging
JNL454 55" STOP. 40kg 88lbs. 140cm. AVF Group Ltd. Hortonwood 30, Telford, Shropshire, TF1 7YE, England. Leaflet No rev00
JNL454 STOP Leaflet No. 465391 rev00 Read through ALL instructions before coencing installation. If you have any questions about this product or issues with installation contact the customer services helpline
The Bowflex Conquest Home Gym Assembly Instructions
The Bowflex Conquest Home Gym Assembly Instructions P/N 001-6841 Rev C (04/2007) Table of Contents Before You Start... 2 Tools You Will Need / Hardware Chart... 3 Parts List... 4 Weight and Multi-carton
Linear Array Transducer
User Guide Type 8809 Linear Array Transducer English BB 0911-H August 2012 For Professional Users Only WORLD HEADQUARTERS Mileparken 34 DK-2730 Herlev Denmark Tel.:+45 44528100 / Fax:+45 44528199 www.bkmed.com
Valencia Pedicle Screw Surgical Technique
Valencia Pedicle Screw Surgical Technique VALENCIA CIRCUIT TABLE OF CONTENTS Design Rationale Indications for Use Surgical Technique 1. Pedicle Preparation 2. Screw Insertion 3. Rod Placement 4. Locking
Japanese Industrial Standard 30 Flare (BSPP Threads)
Japanese Industrial Standard () Connection Types / Identification Japanese Industrial Standard hydraulic connections include 30 flare and 30 cone connections (both internal sealing), parallel and tapered
LEG PRESS ADAPTER KIT FOR GS1/GS2 GYM SYSTEM
LEG PRESS ADAPTER KIT FOR GS/GS GYM SYSTEM WARNING: Read and follow all directions for each step to insure proper assembly of this product. USER S GUIDE CLASS H PART # 780 REV. A Version: GS-LPA-0 Revision:
...our linkages, your solution. Ball & Socket Joints
...our linkaes, your solution Ball & Socket ov-ball-and-socket-joints-divider - Updated - 12-01-2017 Overview Ball & Socket Ball & Socket Ball and Socket Ball and socket joints to DIN 71802 available in
fassier DUVal TelescoPIc IM system s RESCUE SYSTEM 2.0
fassier DUVal TelescoPIc IM system s RESCUE SYSTEM 2.0 The Rescue System was conceived to retrieve components of the Fassier- Duval telescopic IM System after the treatment has been completed or in case
Double Engine Orthopedic Bone Nail System Universal Humeral Nail
Double Engine Orthopedic Bone Nail System ----------- Universal Humeral Nail Surgical Technique Manual Note: The surgical procedures should be performed under the guidance of qualified skilled orthopedic
USER S MANUAL QUESTIONS? CAUTION. Visit our website at.
Model No. NTCCBE950 Serial No. Write the serial number in the space above for future reference. USER S MANUAL Serial Number Decal (under seat) QUESTIONS? As a manufacturer, we are committed to providing
RBL High-pressure AISI 316L stainless steel. For all fluids
RBL High-pressure AISI 316L stainless steel For all fluids Connections in high-pressure circuits carrying corrosive liquids and gases... Applications - High-pressure hydrogen circuits - High-pressure circuits
Installation and Maintenance Instructions
Limited One Year Warranty T&S warrants to the original purchaser (other than for purposes of resale) that such product is free from defects in material and workmanship for a period of one (1) year from
IMPORTANT: Please read and follow all instructions thoroughly before using your AB SHREDDER. Maximum user weight is 100 KG. KEEP BODY PARTS, HANDS AND FEET AWAY FROM THE SEAT, WHEELS AND THE CURVED TRACK
Mini External Fixator.
Mini External Fixator. Assembly and Surgical Technique This publication is not intended for distribution in the USA. Instruments and implants approved by the AO Foundation. Image intensifier control Warning
Round Duct Slot Diffusers Model SKD-13
April 2010 Round Duct Slot Diffusers Round Duct Slot Diffusers Model SKD-13 Features Steel Construction 1 to 14 Slots or 1 to 4 slots Duct diameters of Ø150mm to Ø900mm Cylinder Inner Deflectors Swivel
TECH 2 Dew Point Retrofit Kit
TECH 2 Dew Point Retrofit Kit THORESON McCOSH TECH II Instruction Manual 412765A THORESON-McCOSH INC 1885 Thunderbird St. Troy MI. 48084 Phone 1-248-362-0960 Fax 1-248-362-5270 sales@thoresonmccosh.com
TABLE OF CONTENTS. Warning Label...1. Important Safety Instructions...2. Parts List...5. Assembly Instructions...6. Additional DVD Workouts...
OWNER S MANUAL TABLE OF CONTENTS TABLE OF CONTENTS Warning Label...1 Important Safety Instructions...2 Parts List...5 Assembly Instructions...6 Additional DVD Workouts...11 WARNING LABEL WARNING LABEL
12 EEx d-conduit Material
12 EEx d-conduit Conduit Fittings Conduit fittings, BMF, with female/male union Series Nominal Ordering code Weight RN2095 BMF 1 1 /2" NPT 461 557 0 0,15 BMF 2 3 461 558 0 0,20 BMF 3 1" NPT 461 559 0 0,28
Needle Valves Catalog 4110-NV December 2010
Needle Valves Catalog 4110-NV December 2010 Series Needle Valves Catalog 4110-NV Introduction Parker Series nion onnet Valves have been engineered for use at pressures up to 6,000 (414 bar) and temperatures
NARROW DIAMETER implant
ND NARROW DIAMETER implant TABLE OF CONTENTS ND - NARROW DIAMETER implant Implant characteristics page 04 Dental implant page 05 Open Tray Impression Transfer page 06 Titanium Abutments page 07 O-Ball
Bowflex Home Gym- PR1000
Bowflex Home Gym- PR1000 Prepared for Bowflex Prepared by Christine Pfeiffer April 29, 2013 Table of Contents Table of Contents... iii Introduction... 1 Warnings/Preparation Before Assembly... 3 Basic
Product Information Packet
Product Information Packet Pendulum Full Rack Product Part Number: 410706 Patents: #D562670, Patent Pending Pendulum Full Rack shown with optional pull-up arches. Table of Contents Introduction..... 1
BONE SUBSTITUTION SPECIAL MEMBRANES SCREWS RIVETS
BONE SUBSTITUTION SPECIAL MEMBRANES SCREWS RIVETS 1 Introduction About the company 2 Technology and quality 3 Applied raw materials 5 BIONIKA Titanium membrane meshes Titanium membranes Special membrane
ADEPT Extra Fixation Cup. Operative Technique. Delivering Results Through Performance
ADEPT Extra Fixation Cup Operative Technique Delivering Results Through Performance Contents Section 1 Introduction 3 Section 2 Preparation of the Acetabulum 4 Section 3 Preparation of the Extra Fixation
USER S MANUAL QUESTIONS? CAUTION. For a great selection of new CD and MP3 workouts. Visit our website at. or call
Model No. RBBE950 Serial No. Write the serial number in the space above for future reference. USER S MANUAL Serial Number Decal (Under Seat) QUESTIONS? As a manufacturer, we are committed to providing
THOMAFLUID - Handbook III
Reichelt Chemietechnik GmbH + Co. THOMAFLUID - Handbook III Capillary Connectors Micro Connectors Macro Connectors Pipe Connectors Welding Sleeves Bonded Socket Joints Plug-in Connectors HPLC Connectors
FASSIER DUVAL TELESCOPIC IM SYSTEM S RESCUE SYSTEM 2.0
FASSIER DUVAL TELESCOPIC IM SYSTEM S RESCUE SYSTEM 2.0 The Rescue System was conceived to retrieve components of the Fassier- Duval telescopic IM System after the treatment has been completed or in case
Environmental Submersible Pumps
Environmental Submersible Pumps Grundfos 85S Enviro Retrofitted Submersible Pumps These Grundfos submersible pumps are made of stainless steel and retrofitted with PTFE to handle the rigors of contaminated
Product Specifications and Usage Information P4405, P4410, & P4420 Genesys 30 Dosimeter Holder System
DESCRIPTION The Thermo Genesys 30 Spectrophotometer (G30) is supplied with specially designed dosimeter holders to fit a variety of dosimeters, including the B3 DoseStix and B3 WINdose dosimeters. The
Trinity. Advanced Bearing Acetabular System Surgical technique
Advanced Bearing Acetabular System Surgical technique Contents Operative summary Introduction Pre-operative planning Acetabular preparation Acetabular reaming Reamer guide Acetabular shell trials Acetabular
Extron External Fixator
Operative Technique Extron External Fixator The disposable set for a Distal Radius Fracture The EXTRON-External Fixator made by tantum provides you with a new generation of supply engineering for distal
High-end solution STEP-BY-STEP USER GUIDE
High-end solution STEP-BY-STEP USER GUIDE System Contents REAL TIME Restoration Guided Conical drill Multi-Unit abutment, Conical connection Guided kit for conical connection implant procedure C1 & V3
Introduction to the Taylor Spatial Frame Hardware. Trademark of Smith & Nephew. Certain marks Reg. US Pat. & TM Off.
Introduction to the Taylor Spatial Frame Hardware Trademark of Smith & Nephew. Certain marks Reg. US Pat. & TM Off. What is the Taylor Spatial Frame? Next generation circular fixator capable of 6 axes
EXCELLA ll. Spinal System
EXCELLA ll Spinal System Excella II Spinal System INDICATIONS FOR USE The Innovasis Excella II Spinal System is intended for use in the non-cervical area of the spine. WARNING: The safety and effectiveness
DHS Plate 135º. DHS Platte 135º
Section of hip fixation plate compression system DHS Plate 3º DHS Platte 3º Plaque de DHS 3º Indication : The compression hip plate is primarly indicated for intertrochanteric fractures. However, it can
SelectTech 4.1 Bench Assembly / Owner s Manual
SelectTech 4.1 Bench Assembly / Owner s Manual This product is compliant with the applicable CE requirements. Table of Contents Important Safety Instructions...3 Safety Warning Labels and Serial Number...4
FITNESS #1 HOME
TROJAN MY SPACE MY TIME CAUTION READ ALL PRECAUTIONS AND INSTRUCTIONS IN THIS MANUAL BEFORE USING THIS EQUIPMENT. KEEP THIS MANUAL FOR FUTURE REFERENCE WARRANTY 0861 876526 0861 TROJAN #1 HOME SOUTH AFRICA
NARROW DIAMETER implant
N NARROW IAMETER implant N Precision dental solutions C-Tech Implant is a dynamic company with aggressive growth, producing components and product lines primarily for dental implantology. International
Enclosures & Storage
ON-LINE Enclosures & Storage - contents 51 Electrical / Industrial Enclosures 1172 1193 Industrial 1193 Electrical 1200 53 Knobs, Hinges, Latches & Locks 1217 54 Component Storage & Cases 1257 1192 OM
A Higher Level of Performance. Data Sheet. Centurion. Guided Radar. CGR Series. For more information, please visit >
A Higher Level of Performance Data Sheet Centurion Guided Radar CGR Series For more information, please visit > www.hawkmeasure.com / Dimensions Centurion Guided Wave Radar Radar Principle of Operation
ELEVATE CORE ADJ OWNER S GUIDE
ELEVATE CORE ADJ OWNER S GUIDE TM CONGRATS / TOC 2 CONGRATULATIONS Thank you for choosing Total Gym products and services. As with all of our products, we trust that your ELEVATE Core ADJ will provide
Vibration Limit Switch liquiphant S FTL 70, FTL 71
Technical Information TI 354F/00/en Vibration Limit Switch liquiphant S FTL 70, FTL 71 Level limit switch for all liquids. Version for high medium temperatures. Suitable for use in explosion hazardous
External Skeletal Fixation (ESF)
External Skeletal Fixation (ESF) Technique for fracture repair in animals Introduction External Skeletal Fixation is a versatile and effective technique for fracture repair in animals, rigidly stabilizing
Thank you for purchasing the AB COASTER. Our customer service staff is ready to help and to answer any questions.
Thank you for purchasing the AB COASTER. Our customer service staff is ready to help and to answer any questions. Our phone number is: 908-879-2713 The Ab Coaster Company, 173 Route 206, P.O. Box 9 Chester,
Flex PLI GTR User Manual
Flex PLI GTR User Manual 133-9900 User Manual FLEX PLI GTR Rev C Page 1 of 79 For information on Humanetics products, please visit our web site at www.humaneticsatd.com or contact: Humanetics Innovative
Flow - diaphragm / limiter
GHM Messtechnik GmbH Hans-Sachs-Str. 26 93128 Regenstauf Germany Fon +49 () 942-9383 - Fax - 33 www.ghm-messtechnik.de info@ghm-messtechnik.de Flow - diaphragm / limiter System Flow Diaphragm limiter Nominal
2.0. The Unrivaled Solution for MidFoot Fusion. Reinforced Bone Bridge. Zero Profile. Because Uniform Compression is Better Compression
2.0 The Unrivaled Solution for MidFoot Fusion Uniform Compression Reinforced Bone Bridge Zero Profile Enhanced Implants Refined Instrumentation Efficient Technique Because Uniform Compression is Better
POWERED BY. 200Watts. Dual Batteries in Series
POWERED BY 200Watts Dual 18650 Batteries in Series 1 1. OVERVIEW 2. STANDARD PACKAGE 3. MAIN FEATURES 4. BASIC OPERATION 5. PRECAUTIONS 6. WARRANTY 2 1. OVERVIEW Fire Button OLED Screen Display 510 Atomizer
SaeboMAS (Patent Pending)
SaeboMAS (Patent Pending) Product Manual Maximizing Function While Improving Proximal Strength No Plateau In Sight Introduction SaeboMAS dynamic mobile arm support system is a zero gravity upper extremity
RUBBER WATERBLAST HOSES
up to 15, PSI (1 Bar) RUBBER WATERBLAST HOSES These high pressure hose assemblies combine rugged construction, dependability and safe performance. Designed specifically for waterblast applications Lightweight
NEW NEW. An Extended Solution for Narrow Ridges
NEW mm NEW An Extended Solution for Narrow Ridges NICE System: An Extended Solution for Narrow Ridges Quality Alpha-Bio Tec presents an advanced new NARROW implant solution for narrow alveolar ridges and
Skydrol Crystal Pressure Fittings CPF
Common Specifications (applies to all CPF fittings in this datasheet) DESCRIPTION CPF is an improved cone type fitting system that adds a unique o-ring sealing system which permits leak free connections
12 series (Pneufit) Push-in fittings
> > Port size: Ø /8... /2, Ø 4... 2 mm tube size, SP and NPT threads > > Very compact units > > asy tube insertion for rapid assembly of pneumatic circuits > > Positive tube anchorage > > ll taper threads
SelectTech 4.1 Bench. Assembly Manual
SelectTech 4.1 Bench Assembly Manual Table of Contents Important Safety Instructions...3 Safety Warning Labels and Serial Number...4 Specifications...5 Before Assembly...5 Parts...6 Hardware...7 Tools...7
Features CONSTANT WATTAGE AUTOTRANSFORMER 1.9 SQ FT Lamp Included 0 MOGUL BASE HIGH PRESSURE SODIUM
GAM671L48I2 250W HPS Flood Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit Product Category GAM671L48I2 Appleton/Oz Gedney Floodlight, Mogul Base High Pressure Sodium Lamp; Lamp