Ball Valves. BV & BT Series. Features. Pressure vs. Temperature. Technical Data. Pressure Ratings
|
|
- Marybeth Norman
- 5 years ago
- Views:
Transcription
1 Ball Valves & Series Features Any end type and size combination available upon request Adjustable stem seal can be maintained in-line Panel mountable Bi-directional flow All valves are 00% factory tested with nitrogen at or above 000psig(9bar), % valves have another hydrostatic test at. times maximum working pressure at 00 o F with pure water Technical Data Pressure Ratings 000 psig(bar) with PK 000 psig(0bar) with PCTF 00 psig(0bar) with 000 psig(0bar) with PK or PCTF 00 psig(0bar) with Pressure(psig) Pressure vs. Temperature Temperature( o C) Temperature( o F) PK Seats PCTF Seats Seats SS Valve Body Valves Body Pressure(bar)
2 series D C C H T L L Materials of Construction Item Part Handle Handle Pin Stem Packing Nut Lock Nut Packing Stem Washer nd Connector Connector Seal Seat Ball Body Valve Body Materials SS PCTF PK PCTF PK CFM/A
3 Table of Dimensions for Series Basic Model Number -ML- -FL- -FNS- -NS- -NS-FNS- -NS-FL- -NS- -FO- -FR- -FL- -ML- -ML8- -FL- -FNS- -FRT- -NS- -NS-FNS- -NS- -FNS-ML- -NS-FL- -FNS-FL- -FO- -FR- -FL- -ML0- -ML- -FRT- -FNS- -FRT8- -FNS8- -FO8- -FR8- -MS0- -FMS0- -FL8- -FL- -ML- -ML- -ML8- -ML0- mm FITOK /8" FITOK /8" Female NPT /8" Male NPT /8" Male NPT /" Male FO /" Male FR mm FITOK 8mm FITOK /" Female BSPT /8" Male NPT /8" Male FO /8" Male FR /8" FITOK 0mm FITOK mm FITOK /8" Female BSPT /8" Female NPT /" Female BSPT /" Female NPT /" Male FO /" Male FR M0X. Male ISO M0X. Female ISO /" FITOK /" FITOK mm FITOK mm FITOK 8mm FITOK 0mm FITOK Connection Size Port Port mm FITOK /8" FITOK /8" Female NPT /8" Male NPT /8" Female NPT /" Male FO /" Male FR mm FITOK 8mm FITOK /" Female BSPT /8" Male NPT mm FITOK /8" Male FO /8" Male FR /8" FITOK 0mm FITOK mm FITOK /8" Female BSPT /8" Female NPT /" Female BSPT /" Female NPT /" Male FO /" Male FR M0X. Male ISO M0X. Female ISO /" FITOK /" FITOK mm FITOK mm FITOK 8mm FITOK 0mm FITOK Orifice in. Cv 0.09 (.) (.) (.) (0.).0 L L C H T PHD D in..8 (.).0 (.9). (9.)..0 (9.). (.0). (8.). (.).. (.) (8.). (.)..80 (8.) (.).. (.). (8.). (.0). (.0).8 (.).8 (.). (8.8). (.). (.).8 (.).80 (.).9 (8.).9 (9.). (.).99 (0.). (.).00 (0.8). (9.). (9.9). (9.). (9.9).9 (0.) (.9).8 (.) (.). (.) 0. (8.) 0.8 (.) 0.0 (.8) 0.9 (.). (8.9). (.) 0.8 (.) 0. (.) 0.8 (9.0) 0.8 (.) 0. (9.) 0.9 (.9).88 (.8).0 (.).00 (0.) 0. (9.). (9.). (8.) Remarks: a. FITOK means FITOK double ferrule tube fittings, Fo means O-ring seal fitting, FR means metal gasket seal fittings, there are interchangeable with Swagelok/Parker products b. Dimensions shown are for FITOK nut finger-tight. All dimensions are for reference only, subject to change. For dimension not shownabove, consult the factory please c. The sizes and types listed are standard. Other sizes and types are available upon request, see ordering information d. PHD: panel hole drill e. T: Maximun panel thickness
4 series D H C T L C L L Materials of Construction Item Part Handle Handle Pin Stem Packing Nut Lock Nut Packing Stem Washer nd Connector Connector Seal Seat Ball Body Insert Body SS PCTF CFM/A Valve Body Materials PK PCTF PK
5 Table of Dimensions for Series Basic Model Number -ML- -FL- -FNS- -NS- -FL- -ML- -NS- -ML- -ML8- -FL- -FRT- -FNS- -FO- -FR- -NS- -NS- -FL- -ML0- -FL-FL-NS- -FL8-FL8-FNS8- -FRT- -FNS- -FO- -FR- -FRT8- -FNS8- -FO8- -FR8- -FMS0- -MS0- -FL8- -FL- -ML- -ML- -ML8- -ML0- Connection Size Port Port Port mm FITOK /8" FITOK /8" Female NPT /8" Male NPT mm FITOK mm FITOK 8mm FITOK /" Female BSPT /" Male FO /" Male FR /8" Male NPT /8" FITOK 0mm FITOK /" FTIOK /" FTIOK /8" Female BSPT /8" Female NPT /8" Male FO /8" Male FR /" Female BSPT /" Female NPT /" Male FO /" Male FR M0X. Female ISO M0X. Male ISO /" FITOK /" FITOK mm FITOK mm FITOK 8mm FITOK 0mm FITOK /" Female NPT Orifice in. Cv 0.09 (.) (.) (.) (0.).0 L L C H T PHD D in..8 (.).0 (.9). (9.).8 (.). (.0). (.).8 (.). (.8). (.). (.).8 (.0). (.). (9.).8 (.9).0 (0.).80 (.). (.).9 (9.). (.).00 (0.8). (9.).9 (0.). (.). (9.). (.0). (9.9). (.).8 (.).0 (0.). (.8).89 (.). (.).9 (9.). (.).9 (.).9 (.).80 (.).00 (0.8).8 (.0).8 (.9). (.0). (9.).8 (8.). (0.) 0. (8.) 0.8 (.) 0.0 (.8) 0.9 (.). (8.9). (.) 0.8 (.) 0. (.) 0.8 (9.0) 0.8 (.) 0. (9.) 0.9 (.9).88 (.8).0 (.).00 (0.) 0. (9.). (9.). (8.) Remarks: a. FITOK means FITOK double ferrule tube fittings, Fo means O-ring seal fitting, FR means metal gasket seal fittings, there are interchangeable with Swagelok/Parker products b. Dimensions shown are for FITOK nut finger-tight. All dimensions are for reference only, subject to change. For dimension not shown above, consult the factory please c. The sizes and types listed are standard. Other sizes and types are available upon request, see ordering information d. PHD: panel hole drill e. T: Maximun panel thickness
6 Ordering Information Series Body Material Port Type Port Size Port / Type Port / Size Orifice Size Seat Material Handle Two way SS SS FNS Three Way B NS FRT RT FMS MS FRP BP FL ML FO FR Female NPT Male NPT Female BSP Tapered Male BSP Tapered Female ISO (metric) Male (metric) Female BSP Paralle Male BSP Parallel Fractional FITOK Metric FITOK Male FO Fitting Male FR Fitting /8" /" /8" or mm /" or 8mm 0mm /" or mm mm or Mx.(M) " or mm or Mx.(M) 8mm 0mm or M0x.(M) same with port Specified by the same way with the port type and size 0.09" (.mm) 0." (.mm) 0." (.mm) 0.8" (.mm) 0.0" (.mm) 0.0" (0.mm) K PCTF P PK Black R Red B Blue Y Yellow xample A xample B Remark: Standard thread pitch for metric thread as follows: Model: SS-FNS8- SS: series ball valve Two way Body material is SS FNS8: Port type is female NPT Port size is /" Port type and size are same with Port : Orifice is 0.0"(0.mm) Seat material is Handle is black Model: B-FNS-FNS-MS- B: series ball valve Three way Body material is brass FNS: Port type is female NPT Port size is /" FNS: Port type is female NPT Port size is /" MS: Port type is male ISO Port size is Mx. : Orifice is 0.8"(.mm) Seat material is Handle is black M0 and below: mm M and below:.mm M and below: mm Standard thread pitch should be ignored in the model
Union Bonnet Valves - VU6 Series
BlowOur Proof Back Seating Hardened Stem Thread Mountable Panel nut Metal Seal Bonnet Union Bonnet Valves VU6 Series Features Pressure rating up to 6000psig (13bar) @38 C (100 F) Temperature rating from
More informationINTEGRAL-BONNET NEEDLE VALVES H-300 SERIES
INTEGRAL-BONNET NEEDLE VALVES SERIES INTEGRAL-BONNET NEEDLE VALVES SERIES FEATURES n Straight and angle pattern n Stainless Steel and Brass construction n MAWP 5000 psi (345 bar) n MAWT 446 F (230 C) n
More informationNeedle Valves. We deliver confidence through quality products
We deliver confidence through quality products INTRODUCTION NEEDLE VALVES SD range of Needle valves come in various sizes, sealing styles, end connections and stem types. They are available in bar stock
More informationJapanese Industrial Standard 30 Flare (BSPP Threads)
Japanese Industrial Standard () Connection Types / Identification Japanese Industrial Standard hydraulic connections include 30 flare and 30 cone connections (both internal sealing), parallel and tapered
More informationNeedle Valves Catalog 4110-NV December 2010
Needle Valves Catalog 4110-NV December 2010 Series Needle Valves Catalog 4110-NV Introduction Parker Series nion onnet Valves have been engineered for use at pressures up to 6,000 (414 bar) and temperatures
More informationneedle valves 3700, 3800, 3900 Series Forged Body, Integral Bonnet Needle Valves
orged ody, Integral onnet Needle Valves Offered in four different body materials, this group of valves can handle a wide range of general purpose liquid and gas applications. Six types of stem tips are
More informationInline Filters (F Series) Catalog 4130-F July 2005
Inline Filters (F Series) Catalog 4130-F July 2005 Catalog 4130-F Introduction Parker are designed for protection of instrumentation systems from undesirable materials. Component changes or repair and
More informationMisc: Interchange Coupling
Wing Style Interchange Coupling Misc: Interchange Coupling Series: W Interchange: Parker 6100 - Seals: Nitrile - Threaded sleeve allows connection/disconnection under pressure - Coupler: brass material
More informationIn-Line Accessories. In-Line Pressure Gauges. Pressure Gauges. In-Line Accessories
Pressure Gauges Pressure gauges for monitoring system pressure Hoses and test points for sampling oil and determining ISO cleanliness levels Flanges to connect components Valves for system control In-Line
More information12 series (Pneufit) Push-in fittings
> > Port size: Ø /8... /2, Ø 4... 2 mm tube size, SP and NPT threads > > Very compact units > > asy tube insertion for rapid assembly of pneumatic circuits > > Positive tube anchorage > > ll taper threads
More informationFittings, Tubing & Nipples
s, Tubing & Nipples P Series Pipe s s to 15,000 psi (1034 bar) Since 1945 utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and manufacturing
More information12 series (Pneufit) Push-in fittings Ø 1/8... 1/2, Ø mm tube size, BSP and NPT threads
2 series (Pneufit) Push-in fittings Ø /8... /2, Ø 4... 2 mm tube size, SP and NPT threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage ll taper
More informationFITTINGS. Pneufit C composite and Pneufit M fittings Inch Ø 1/8" to 1/2" O/D tube
Pneufit C composite and Pneufit M fittings Ø 1/8" to 1/2" Ready to use. Over 1,000 composite push-in pneumatic fittings. Releasable stainless-steel grab-ring to grip nylon or polyurethane (8 or 9 durometer).
More informationImpact resistant PBT body in black for Pneufit C and light gray for Pneufit M.
Pneufit C composite and Pneufit M fittings Ø Â" to Ë" Ready to use. Over 1,000 composite push-in pneumatic fittings. Releasable stainless-steel grab-ring to grip nylon or polyurethane (85 or 95 durometer).
More informationFasMate Quick Connectors Industry Applications:
FasMate Quick Connectors Industry Applications: The FasMate Series instantly seals threaded ports from vacuum up to 344.7 bar. The patented proprietary design makes sealing threaded ports as easy as 1,
More informationContents. Coming soon from Teryair!!
Technical products for the ship suppl y industry Contents Teryair is a specialist manufacturer of precision pneumatic tools and marine industrial equipment. Our factories in Mumbai, India are certified
More informationAnamet galvanised steel fi ttings for Sealtite.
namet galvanised steel fi ttings for Sealtite. NMT The galvanised steel namet fi ttings can be used with all types of naconda Sealtite (except NP) and are particularly used where a wider temperature range
More informationDURASEAL. High Integrity, Double Block and Bleed Plug Valve.
DURASEAL High Integrity, Double Block and Bleed Plug Valve www.franklinvalve.com How the DuraSeal Works An improved valve with a proven history We took an alternative path. Unlike many valve manufacturers
More informationProduct Index by Coupler Style & Interchange
Product Index by Coupler Style & Interchange Flat Face Style Series Description Page # A Premier ISO 16028 Interchange Flat Face Coupling In accordance with ISO 16028 for Interchange and Performance. s:
More informationJ320, J330 and J340 PLUMBING PARTS CATALOG
PREMIUM J0, J0 and J0 PLUMBING PARTS CATALOG PREMIUM PUMP Pump/Motor # Location (for the J0 and J0) Pump/Motor # Location (for the J0) * 9 0 * 00- HOUSING: FRONT 00-90 O-RING: FRONT HOUSING 00-9 IMPELLER:.9
More informationIn-Line Check Valves. Features. Valves. Working Pressures to: Flow Ranges to:
Valves In-Line Check Valves Working Pressures to: Flow Ranges to: 5700 psi/393 bar 200 gpm 757 lpm Features Steel constructed check valves are compatible with all non-corrosive liquids. Valves contain
More informationTru-Fit 10k Fittings
Tru-Fit 10k Fittings TruFit 10K Pipe and Adapter Fittings are designed and manufactured to provide a reliable connection in high pressure systems running to 10,000 psi. Manufactured from fully-traceable
More informationDill Air Controls Gauge and Air Chuck Catalog
Air Controls Gauge and Air Chuck Catalog Member of Tire and Rim Association ISO Registered Organization 1903 2009 Dill # Range Comments Finish Pack Available in various colors or 5600 10-75 PSI your company
More informationPlant, components and devices for very high and high pressures (7000 bar and over)
Plant, components and devices for very high and high pressures (7000 bar and over) VALVES AND FITTINGS UP TO 1035 BAR MATERIALS All fittings are manufactured from EN 1.4404 / AISI 316L stainless steel
More informationROTARY UNION 9000 SERIES GENERAL PURPOSE MODELS ADDED MODELS ADDED. Operating Parameters FEATURES & BENEFITS MEDIA PRESSURE* TEMPERATURE* SPEED*
ROTARY UNION 9 SERIES GENERAL PURPOSE Operating Parameters Steam, Hot Oil, Water MEDIA PRESSURE* 25 psi (Water), 75 psi (Steam), psi (Hot Oil) MODELS ADDED MODELS ADDED TEMPERATURE* 6 F (Hot Oil), 378
More informationTECH 2 Dew Point Retrofit Kit
TECH 2 Dew Point Retrofit Kit THORESON McCOSH TECH II Instruction Manual 412765A THORESON-McCOSH INC 1885 Thunderbird St. Troy MI. 48084 Phone 1-248-362-0960 Fax 1-248-362-5270 sales@thoresonmccosh.com
More informationAdapters, Couplers and Fittings.
Adapters, Couplers and Fittings www.alliedhpi.com 1 Table of Contents QUICK-CONNECT ADAPTERS AND COUPLERS Chemetron Quick-Connect Adapters 3 Chemetron Quick-Connect Adapters ISO 4 Chemetron Quick-Connect
More informationD.O.T Fittings. Version 2015
D.O.T Fittings Version 2015 Revised 3/18/2015 Fax your order to: (763) 398-2590. customerservice@polyconn.com. www.polyconn.com. Questions call: (763)559-0388 3062 Ranchview Lane North. Plymouth, MN 55447
More informationAG INTERCHANGE IR I IRV I IRS SERIES POPPET INTERCHANGE COUPLERS Ag Style Interchange
G INTERCHNGE IR I IRV I IRS SERIES POPPET INTERCHNGE COUPLERS g Style Interchange The griculture IR Series Hydraulic Quick Couplings offer automatic shut-off during disconnection. The IR features a variety
More informationBGS MODEL HP-165M FLUID END PARTS LIST
BGS MODEL HP-165M FLUID END PARTS LIST ITEM PART NUMBER REQ'D PART DESCRIPTION NO. QTY 001 BGS 008-024179-350 1 POWER FRAME 007 BGS 170-012005-353 1 PIPE PLUG, MAGNETIC 014 BGS 001-013059-999 1 FILTER/BREATHER
More informationMechanically actuated valves
Mechanically actuated valves /2-5/2 spool valves with /8 NPT threaded ports Installation in any position Comprehensive range of actuations, direct or servo-piloted Special versions on request Materials
More informationInstallation and Maintenance Instructions
Limited One Year Warranty T&S warrants to the original purchaser (other than for purposes of resale) that such product is free from defects in material and workmanship for a period of one (1) year from
More informationSUN VALLEY STOVE COMPANY
LO HI ON PILOT LO HI ON PILOT SUN VALLEY STOVE COMPANY VENT-FREE NATURAL GAS STOVE HEATER ILLUSTRATED PARTS BREAKDOWN MSVFBNR 1 2 6 21 3 7 4 21 11 22 9 12 23 10 13 OFF 1 17 24 14 16 17 1 19 OFF 12 OWNER
More informationCheck Valves PRODUCT DESCRIPTION FEATURES & BENEFITS TECHNICAL SPECIFICATIONS
Check Valves PRODUCT DESCRIPTION CPI check valves are designed for high pressure applications where reverse flow and leakage must be kept to a minimum. Typical applications include engine, pump and compressor
More informationTECHNICAL SPECIFICATIONS. Carbon Steel / Stainless Steel One piece design BALL. Stainless Steel MAXIMUM OPERATING TEMPERATURE CRACKING PRESSURE
Check Valves PRODUCT DESCRIPTION CPI check valves are designed for high pressure applications where reverse flow and leakage must be kept to a minimum. Typical applications include engine, pump and compressor
More informationFittings & Accessories
Fittings & Accessories Adalet offers a range of fittings and accessories for use in general purpose or industrial locations. These fittings and accessories are used in conjunction with our industrial electrical
More informationAssembly Instruction for Fiber Optic Series FOH Fischer Connectors
Assembly Instruction for Fiber Optic Series FOH Fischer Connectors Table des matières 1 Introduction... 3 2 Document history... 3 3 Definitions and Acronyms... 3 4 FOH Plugs & Receptacles with Potting
More informationInterchange Coupling. Poppet: Interchange Coupling
griculture Overview Stucchi griculture Series couplings are offered with a choice of either ball or poppet valve mechanisms for automatic shut-off during disconnection. The ball mechanism is the IR series,
More informationlimbsandthings.com Advanced Catheterisation Trainer User Guide For more skills training products visit Limbs & Things Ltd.
Advanced Catheterisation Trainer Product No: 60150 User Guide For more skills training products visit limbsandthings.com Limbs & Things Ltd. Sussex Street, St Philips Bristol, BS2 0RA, UK sales@limbsandthings.com
More informationJ350, J360 and J370 PLUMBING PARTS CATALOG
PREMIUM J0, J0 and J0 PLUMBING PARTS CATALOG PUMP Pump/Motor # * 0 * 00- HOUSING: FRONT 00-0 O-RING: FRONT HOUSING 00- IMPELLER:. DIA 00-0 PUMP: SEAL ASSY / VITON 00- HOUSING: REAR BRACKET 00-0 MOTOR:.HP
More informationQuick Sealing with a Twist to Connect Actuation Method
- Finger tighten seals up to 689 bar (10,000 psi) for pneumatic and hydraulic testing - Safe and Reliable leak tight connections to male and female threads - Eliminate thread damage, sealant and wrenches
More informationAxi+LineTM Proximal Bunion CorrectionSystem. Surgical Technique
Axi+LineTM Proximal Bunion CorrectionSystem Surgical Technique A i Line Proximal Bunion Correction System TM Desired angle correction is built into the plate, providing a self-reducing, 5-hole construct
More informationPEEK SS Columns & Guard Columns
PEEK SS Columns & Guard Columns ~ Stainless Steel Analytical Columns ~ PEEK Columns ID 2.1, 4.0, 4.6 & 7.5 mm ~ Jour-Guard Cartridges Stainless Steel or PEEK ~ Stainless Steel End Fittings 1/4 OD Columns
More informationAll dimensions are in mm. Plug: Coding Pin: HOODS TOP ENTRY HOODS. NPT Part # NP NP 10.
HA 3&4 Plugs & Receptacles HA 3&4 Housings: Single Lever on Base SCREW TERMINATED INSERTS HA 3 HA 4 All dimensions are in mm. HA 3 HA 4 Plug: 10.40 10.4310 Receptacle: 10.40 10.43 Coding Pin: 10.4513 TOP
More informationTable of Contents Table of Contents
9000 Table of ontents Table of ontents Introduction...................................................................9000. 9000 Scope of esign...........................................................9000.3
More informationMEDICAL GAS FITTINGS & CONNECTIONS Quick Reference Guide
MEDICAL GAS FITTINGS & CONNECTIONS Quick Reference Guide www.baycorporation.com ISO 9001 ISO 13485 Follow us: 867 Canterbury Rd., Westlake, OH 44145 USA P: 440.835.2212 888.835.3800 F: 440.835.1377 E:
More informationChoose for Your Instrument. GC Supplies - Shimadzu Instrument Quick Pick Guide
Choose for Your Instrument GC Supplies - Shimadzu Instrument Quick Pick Guide Syringes Septa Inlet Liners O-rings and Sealing Rings SilTite FingerTite Ferrules Ferrules Replacement Parts Your chromatography
More informationCOST, PROCESS & QUALITY IMPROVEMENT
COST, PROCESS & QUALITY IMPROVEMENT - Finger tighten seals up to 10,000 psi (689 bar) for pneumatic and hydraulic testing - Safe and Reliable leak tight connections to male and female threads - Eliminate
More informationOriginal Chiksan Swivel Joints
Original hiksan Swivel Joints Steamlined bore minimizes flow restrictions Smooth, round bore design minimizes turbulence and pressure drop, Longsweep and TripleStep swivel joints have extralong radius
More informationTHOMAFLUID - Handbook III
Reichelt Chemietechnik GmbH + Co. THOMAFLUID - Handbook III Capillary Connectors Micro Connectors Macro Connectors Pipe Connectors Welding Sleeves Bonded Socket Joints Plug-in Connectors HPLC Connectors
More informationINTRAMEDULLARY NAILING TIBIA AND FEMUR 1.3 TIBIAL AND FEMORAL NAILING FEMORAL NAILING WITH RETROGRADE INSERTION IMPLANTS AND OPERATING MANUAL
1.3 TIBIA AND FEMORA NAIING FEMORA NAIING WITH RETROGRADE INSERTION IMPANTS AND OPERATING MANUA INTRAMEDUARY NAIING TIBIA AND FEMUR Medical Products Manufacturing and Trading td. General informations
More informationExploded diagram and spare parts list - CN990 - Santos Cold Press Juicer
1 P a g e CN990 - Santos Cold Press Juicer 65101 AH280 PUSHER CN990 - Santos Cold Press Juicer 65102 AH281 FEEDING TUBE CN990 - Santos Cold Press Juicer 65103 PULP CONTAINER CN990 - Santos Cold Press Juicer
More informationCam & Groove Fittings. King Nipples
Cam & Groove Fittings King Nipples Index Aluminum Type A, Male Adapter x Female NPT...3 Type B, Female Coupler x Male NPT...3 Type C, Female Coupler x Hose Shank...4 Type D, Female Coupler x Female NPT...4
More informationRoss Brown Sales Pty. Ltd. Portable Pressure/Vacuum Comparator
Ross Brown Sales Pty. Ltd. Portable Pressure/Vacuum Comparator The data provided above is for information purposes only and no warranty of accuracy or reliability is given. Page 17 of 30 Pressure Generating
More informationSkydrol Crystal Pressure Fittings CPF
Common Specifications (applies to all CPF fittings in this datasheet) DESCRIPTION CPF is an improved cone type fitting system that adds a unique o-ring sealing system which permits leak free connections
More informationaccessories that make a difference
THE SERIES Here below all the parts of the XFit series. By assembling them you will be able to set your own custom XFit structure. You can decide by your own how many Rigs and/or Racks and which options
More informationDescription The 4000 Series offers up to 8600 in-lb of torque and 25 gpm (continuous ratings). This is the corner stone of the Char-Lynn line.
Highlights Features ety of mounting flanges and output shafts options Benefits motor into a system tough applications Applications Description The 0 Series offers up to 0 in-lb of torque and gpm (continuous
More informationTable of Contents. Mark 3, SPA 3 & PA 3 Series
Table of Contents...3-9 NSI Symbols... 3 Technical and Operating Data.... How to Order....5-6 Valve with ase....7-8 Manifold lock ssembly...9-0 Sandwich ressure Regulator.... Regulator Service Kits....
More informationEasy assembly with standard tools. Fully insulated for direct mounting to steel panels
Cam-Lok J Series Connectors or NEMA 4 Cam-Lok J Series Connectors are specifically designed to meet the needs of demanding portable applications. J Series Plugs and Receptacles are the proven industry
More informationHeight* FC width Prep depth RC width 4.0mm+ 4.3mm N/A 6.3mm
STERN ERA IMPLANT ABUTMENT Summary Resilient precision overdenture attachment. Universal hinge with vertical movement. Titanium abutment, nylon male. Manufactured for most popular screw and cylinder implants.
More informationLongevity Offset and Oblique Liners. Surgical Technique
Longevity Offset and Oblique Liners Surgical Technique Longevity Offset & Oblique Liners Surgical Technique 1 Introduction Complete Acetabular System Joint instability is an important issue in both primary
More informationClick the column to open specific parts pages FLOAT KITS MACHINE
Click the column to open specific parts pages FLOAT KITS LIFT FLOAT KITS ANGLE FLOAT KITS MACHINE 7434571 8126346 8126326 8126327 8126355 8126356 8126335 8126336 8126337 8126351 8126338 8126352 8126261
More informationinjections. Needle Tip 1 µl Cone 1BR
s General Purpose Manual s 0.5-5 µl Nano With the ability to inject down to 50 nl with high precision and accuracy, SGE Nano s are perfect for Nano capillary chromatography injection as well as making
More informationOPTIONAL/ADDITIONAL INSTRUMENTS
20 Elevated 6320-36-22 20 Elevated Rim Liner, 36mm OD x 22mm ID 6320-80-22 20 Elevated Rim Liner, 80mm OD x 22mm ID 6320-42-26 20 Elevated Rim Liner, 42mm OD x 26mm ID 6320-80-26 20 Elevated Rim Liner,
More informationSUMMARY UNITS INTRODUCTION PAGE 2-4 KEY TO CODES PAGE 2-7 FILTER PAGE 2-8 DEPURATOR PAGE 2-11 ACTIVE CARBON FILTER PAGE 2-14.
SUMMARY INTRODUCTION PAGE - KEY TO CODES PAGE -7 FILTER PAGE -8 DEPURATOR PAGE - SUMMARY Syntesi ACTIVE CARBON FILTER PAGE - REGULATOR PAGE -7 IN-SERIES REGULATOR PAGE - FILTER-REGULATOR PAGE - LUBRICATOR
More informationP SERIES. 250 psi NFPA Pneumatic Cylinder TECHNICAL BROCHURE. Bore Sizes from 11/2 to 14
Actuation Solutions and Systems for the P SERIES 250 psi NFPA Pneumatic Cylinder Bore Sizes from 11/2 to 14 Actuation Solutions and Systems for the Design & Materials Temperature Ratings Low Temp. -54
More informationlimbsandthings.com Advanced Female Catheterisation Trainer User Guide For more skills training products visit Limbs & Things Ltd.
Advanced Female Catheterisation Trainer Product No: 60155 User Guide For more skills training products visit limbsandthings.com Limbs & Things Ltd. Sussex Street, St Philips Bristol, BS2 0RA, UK sales@limbsandthings.com
More informationRing Type Joints are widely used by the Oil, Gas, Petrochemical and Offshore Industries in applications subject to high pressures and temperatures.
Type Joints Noble Engineers is an independent company manufacturing and supplying a variety of high quality sealing products designed for flange applications in the industrial and manufacturing sectors.
More informationSERIES HYDRAULIC MOTORS
DT SERIES HYDRULIC MOTORS DT overview The most amazing aspect of the DT Series motor is its huge torque potential from its relatively small size. The DT Series motor is capable of producing output torque
More informationDouble Block and Bleed ball valve have evolved to replace the process of bolting together individual valves to provide dual isolation.
Bleed valve Double Block and Bleed ball valve have evolved to replace the process of bolting together individual valves to provide dual isolation. This new assembly provides great savings in weight, space
More informationTrilogy Acetabular System
Trilogy Acetabular System Surgical Technique Versatility in a proven design Trilogy Acetabular System 1 Trilogy Acetabular System Surgical Technique Table of Contents Acetabular Reaming 2 Component Sizing
More informationTXV, EXPANSION VALVES (12- )
Section V: Table of Contents TXV - Expansion Valves Basic Information EXPANSION VALVES (TXV) The expansion valve is the carburetor of the A/C system. It is one of the dividing lines between the high and
More informationMFD Filters (MGF Series) 8.3. MFD Mini Regulators (MSR Series) 8.4. MFD General Purpose Regulators (MGR Series) 8.5
ir Preparation Equipment MFD Filters (MGF Series) 8.3 MFD Mini Regulators (MSR Series) 8.4 MFD General Purpose Regulators (MGR Series) 8.5 MFD General Purpose Lubricators (MGL Series) 8.6 MFD Filter -
More informationAl and AlCu terminals and connectors mm²
Al and AlCu terminals and connectors 16-1200 ² General information 2 Al terminals 16-1200 ² 3 Through connectors with partition 16-1200 ² 4 Through connectors without partition 0-240 ² Through connectors
More informationTrilogy Acetabular System
Trilogy Acetabular System Surgical Technique Versatility in a proven design Trilogy Acetabular System 1 Trilogy Acetabular System Surgical Technique Table of Contents Acetabular Reaming 2 Component Sizing
More informationC O M P R E H E N S I V E S A F E T Y W I T H A T E X B Y C O N T R O L W E L L
C O M P R E H E N S I V E S A F E T Y W I T H A T E X B Y C O N T R O L W E L L The current international regulations for machine manufacturers (94/9/EC) and operators (99/9/EC) prescribe high safety levels.
More informationAdvanced Catheterisation Trainer User Guide
Advanced Catheterisation Trainer User Guide Also for Advanced Male Catheterisation Trainer Part No: 605 Advanced Female Catheterisation Trainer Part No: 6055 Designed and manufactured by Limbs & Things
More information- RESTORATIVE PRODUCT CATALOG
- RESTORATIVE PRODUCT CATALOG MADE IN USA Others make Implants to sell... Tatum Surgical makes Implants to treat your Patients. Your Source for Implants To Meet Every Clinical Need Tatum... 4 Angled Post
More informationDescription The 4000 Series offers up to 8600 in-lb of torque and 25 gpm (continuous ratings). This is the corner stone of the Char-Lynn line.
Highlights Features displacements, a variety of mounting flanges and output shafts Reliable, proven design High efficiency Environmental protection options Benefits Flexiblilty in designing this motor
More informationControl Panel Regulators
Control Panel Regulators Modular design for service & interchangeability Non-rising adjustment knob with push-pull lock ring feature Small package size and light weight construction Competitively priced
More information1 Study the drawings and the installation. 2 Ensure that you have the correct components. 3 Follow the manufacturer s instructions
1 Study the drawings and the installation plan ahead of time. Consider laying the components out in the approximate order in which they will be installed. This will help workers become familiar with the
More informationBUSHINGS: GENERAL INFORMATION
BUSHINGS: GENERAL INFORMATION 1.0 Electrical characteristics (Ir = rated current; Ur = rated voltage) 1.1Standard insulation levels Rated voltage Ur kv (r.m.s.) 1 3,6 12 24 36 52 One minute power frequency
More informationADAPTER IECEx-ATEX, RNC, IP66 / 68, NICKEL PLATED BRASS
ADAPTER IECEx-ATEX, RNC, IP66 / 68, NICKEL PLATED BRASS Anamet IECEx-ATEX adapter fitting, type RNC and RAC, nickel plated brass Type RNC IECEx-ATEX approved 45 or 90 nickel plated brass adapter, male
More informationBee Valve Inc. has stood the test of time.
IO 9001:2008 Bee Valve Inc. has stood the test of time. Bee Valve Inc. traces its origin back a half-a-century to the beginning of the modern plastics industry. The company was on the developmental forefront
More informationCrystal Pressure Fittings CPF
Common Specifications (applies to all CPF fittings in this datasheet) DESCRIPTION CPF is an improved cone type fitting system that adds a unique o-ring sealing system which permits leak free connections
More informationIsn t it worth two bags?
Isn t it worth two bags? NEW from Miltenyi Biotec CryoMACS Freezing Bag CryoMACS Freezing Bag Designed for freezing and cryopreservation of blood components Overwrap bag protects both sample and freezing
More information4766 Research Dr. San Antonio, TX insightdentalsystems.com
OVERVIEW OF THE INSIGHT DENTAL IMPLANT DELIVERY SYSTEM The IDS system comes in a unit dose implant system where its advantage provides sterile instrumentation in one single-use kit. It is organized to
More informationEXPANSION VALVES (TXV)
Table of Contents Basic Information (TXV) The expansion valve (also referred to as TXV) is located at the evaporator inlet; controlling the flow of refrigerant entering the evaporator based on the cooling
More informationCompressor Accessories
Compressor Accessories Series 11 Superior quality for superior performance COMPRESSOR OIL Description MINERAL 11.1100 1 litre container 11.1400 4 litre container SYNTHETIC 11.1200 1 litre container 11.1500
More informationHydraulic Motor & Brake
whitedriveproducts SERIES 00-0 - 0 - HEVY DUTY Hydraulic Motor & rake DT DT (ll Series) For Heavy Duty pplications whitedriveproducts Overview series descriptions The most amazing aspect of the DT Series
More informationHigh current plug-in connector
2017.12 High current plug-in connector with a wrong insertion prevention mechanism Plug-in Connector (A Wrong Insertion Prevention Mechanism) Features of the high current plug-in connector with a wrong
More informationPRIMARY POROUS PATELLA WITH TRABECULAR METAL. Surgical Technique
PRIMARY POROUS PATELLA WITH TRABECULAR METAL Surgical Technique 1 SURGICAL TECHNIQUE FOR NEXGEN PRIMARY POROUS PATELLA * WITH TRABECULAR METAL CONTENTS PREPARE THE PATELLA............... 2 Patella Reamer
More information1105 Windham Parkway Romeoville, IL USA stucchiusa.com. Stucchi USA YOUR NEXT GREAT SOLUTION Product Catalog REV018
1105 Windham Parkway Romeoville, IL 60446 USA 847.956.9720 stucchiusa.com Stucchi USA YOUR NEXT GREAT SOLUTION Product Catalog REV018 YOUR NEXT GREAT SOLUTION Stucchi, Inc. provides high-quality hydraulic
More informationProducts for a Fast and Reliable Fill
o bt u r at i o n Products for a Fast and Reliable Fill A Look Inside: 2Seal and 2Seal easymix Paste Carrier Gutta Percha Finger Pluggers Paper Points Finger Spreaders Now with Slim, 360º Flex Tip.......................
More informationCALL TODAY C302 Rivnut & Plusnut Header Operating Instructions & Parts List ISO CERTIFIED
C302 Rivnut & Plusnut Header Operating Instructions & Parts List Table of Contents Page. Introduction 3 General 3 Preliminary Adjustment 3 Air Supply 3 Lubrication 3 2. Operation and Adjustment 3 Operating
More informationCrystal Pressure Fittings CPF
Common Specifications (applies to all CPF fittings in this datasheet) DESCRIPTION CPF is an improved cone type fitting system that adds a unique o-ring sealing system which permits leak free connections
More informationGraftLink All-Inside ACL
Surgical Technique GraftLink All-Inside ACL GraftLink All-Inside ACL Reconstruction with ACL TightRope ABS GraftLink Minimally Invasive ACL Reconstruction The GraftLink technique provides the ultimate
More informationSPARE PARTS LIST BRUSHCUTTERS/CLEARING SAWS 345 FR,
SPARE PARTS LIST BRUSHCUTTERS/CLEARING SAWS 345 FR, 2012-12 ACCESSORIES 345 FR, 2012-12 ACCESSORIES 345 FR, 2012-12 Ref Part no. Description Remark Qty Kit 1 502 15 70-02 SUPPORT CUP 1 2 544 35 91-01 TRANSPORT
More informationDELUXE HOME GYM HG Model HG Retain This Manual for Reference OWNER'S MANUAL
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Important Assembly Information DELUXE HOME GYM HG 8250 Care and Maintenance Parts List Warranty Ordering
More information747 Series Stopper Plugs Cable Gland Accessories Flameproof.
747 Series Stopper Plugs Flameproof. Class I, Groups, A, B, C, D Type 4X; Ex d II Component Equipment Stopper plug is designed for use from the outside of the Idea for use on flameproof electrical equipment
More information