MFD Filters (MGF Series) 8.3. MFD Mini Regulators (MSR Series) 8.4. MFD General Purpose Regulators (MGR Series) 8.5

Transcription

1 ir Preparation Equipment MFD Filters (MGF Series) 8.3 MFD Mini Regulators (MSR Series) 8.4 MFD General Purpose Regulators (MGR Series) 8.5 MFD General Purpose Lubricators (MGL Series) 8.6 MFD Filter - Regulators (MGFR Series) 8.7 MFD FRL Combination (MGFC Series) 8.8 MFD FRL ccessories MFD Mounting ccessories 8.12 MFD ir Preparation Equipment List Prices Pneumatic Isolation Valves ir Preparation Equipment

2 ir Preparation Equipment From Filters FRL Combinations Mini Regulators Pressure Relief Valves General Purpose Regulators Soft Start Valves General Purpose Lubricators Distribution locks Filter Regulators Pneumatic Isolation Valves ir Preparation Equipment 8.2

3 MFD ir Preparation Equipment MGF Series Fluid Model MGF-6-S MGF-8-S Filters MGF-8 MGF-8-S MGF- MGF--S MGF-15 MGF-15-S MGF6- MGF6--S MGF6-25 MGF6-25-S Port Size 1/8 NPT 1/4 NPT 1/4 NPT 3/8 NPT 1/2 NPT 3/4 NPT 1 NPT Filtering Pressure Range Proof Pressure Temperature Range Drain owl Capacity ir µ standard (5µ optional) to 1 PSI 215 PSI to 16 F.34 FL OZ 1.35 FL OZ 2.7 FL OZ 7.8 FL OZ owl Material Polycarbonate owl Polycarbonate owl with Metal owl Guard Metal owl with Sight Glass ody Material Mounting luminum Individual racket or Modular Kit Drain lank: uto Drain S: Semi-uto Drain Includes Stamped Steel racket ir Preparation Equipment Manual Pneumatic Isolation Valves - PIV Series Dimensions (mm, except where noted) RCKET INCLUDED H G C F E J K Model C D E F G H J K MGF /8 NPT N/ MGF /4 NPT N/ MGF /4 NPT G 1/ MGF /8 NPT G 1/ MGF /2 NPT G 1/ MGF /4 NPT G 1/ MGF NPT G 1/ D Performance Data MGF Flow Characteristics MGF MGF MGF For Technical ssistance:

4 MFD ir Preparation Equipment MSR Series Mini Regulators Model MSR-6 MSR-8 Fluid ir Port Size 1/8 NPT 1/4 NPT Type Relieving regulators with push to lock adjustment knobs Pressure Range 7 to 1 PSI Proof Pressure 215 PSI Temperature Range to 16 F ody Material luminum Mounting Individual racket Includes Gauge / Stamped Steel racket / Nut / 2 Gauge Ports Dimensions (mm, except where noted) M x GUGE INCLUDED 2 RCKET INCLUDED WHEN DJUSTING KNO LOCKED 26 6: 1/8 8: 1/4 OTH SIDES (2) 1/8 NPT PRESSURE GUGE PORT Performance Data Flow Characteristics MSR Regulation Characteristics MSR Inlet Pressure (psi) Set Point 8.4

5 MFD ir Preparation Equipment MGR Series Fluid Model MGR-6 MGR-6-L MGR-8 MGR-8-L MGR-8 MGR-8-L MGR- MGR--L ir MGR-15 MGR6- MGR6-25 Port Size 1/8 NPT 1/4 NPT 1/4 NPT 3/8 NPT 1/2 NPT 3/4 NPT 1 NPT Type Pressure Range Proof Pressure Temperature Range ody Material Mounting Includes Dimensions (mm, except where noted) RCKET INCLUDED C D H J General Purpose Regulators E F G L M Relieving regulators with push to lock adjustment knobs lank: 7-1 PSI 215 PSI -16 F luminum L: 7-6 PSI Individual racket or Modular Kit Gauge / racket / Nut / 2 Gauge Ports Model C D E F G H J K L M MGR-6 32 M x 1.5 1/8 NPT MGR-8 32 M x 1.5 1/4 NPT MGR M x 1.5 1/4 NPT MGR M x 1.5 3/8 NPT MGR-15 M55 x 2. 1/2 NPT MGR M68 x 1.5 3/4 NPT MGR M68 x NPT ir Preparation Equipment Manual Pneumatic Isolation Valves - PIV Series K Performance Data Flow Characteristics Regulation Characteristics 9 MGR 9 MGR 32 MGR 32 MGR Set Point 29 Set Point Inlet Pressure (psi) Inlet Pressure (psi) 9 MGR 9 MGR6 32 MGR 32 MGR Set Point 29 Set Point Inlet Pressure (psi) Inlet Pressure (psi) 8.5 For Technical ssistance:

6 MFD ir Preparation Equipment MGL Series Fluid Model MGL-6 MGL-8 MGL-8 MGL- MGL-15 MGL6- MGL6-25 Port Size 1/8 NPT 1/4 NPT 1/4 NPT 3/8 NPT 1/2 NPT 3/4 NPT 1 NPT Pressure Range Proof Pressure Temperature Range ir 7-1 PSI 215 PSI -16 F Oil owl Capacity.85 FL OZ 2.5 FL OZ 5.4 FL OZ 12.8 FL OZ owl Material ody Material Recommended Lubricant Mounting Includes General Purpose Lubricators Polycarbonate owl Polycarbonate owl with Metal owl Guard luminum Non-Detergent SE, ISO VG32, or equivalent Individual racket or Modular Kit Stamped Steel racket Metal owl with Sight Glass Dimensions (mm, except where noted) RCKET INCLUDED E D Model C D E F G H J K F J MGL-6 1/8 NPT MGL-8 1/4 NPT MGL /4 NPT H K MGL- 41 3/8 NPT MGL-15 1/2 NPT MGL6-7 3/4 NPT MGL NPT C G Performance Data Flow Characteristics MGL MGL MGL MGL

7 MFD ir Preparation Equipment MGFR Series Fluid Model MGFR-6-S MGFR-8-S MGFR-8 MGFR-8-S MGFR- MGFR--S MGFR-15 MGFR-15-S MGFR6- MGFR6--S MGFR6-25 MGFR6-25-S Port Size 1/8 NPT 1/4 NPT 1/4 NPT 3/8 NPT 1/2 NPT 3/4 NPT 1 NPT Type Filtering Pressure Range Proof Pressure Temperature Range Drain owl Capacity ir Relieving regulators with push to lock adjustment knobs µ standard (5µ optional) to 1 PSI 215 PSI to 16 F.34 FL OZ 1.35 FL OZ 2.7 FL OZ 7.8 FL OZ owl Material Polycarbonate owl Polycarbonate owl with Metal owl Guard Metal owl with Sight Glass ody Material Mounting luminum Individual racket or Modular Kit Drain lank: uto Drain S: Semi-uto Drain Includes Filter - Regulators Stamped Steel racket / Nut ir Preparation Equipment Manual Pneumatic Isolation Valves - PIV Series Dimensions (mm, except where noted) C J K P F G H Model C D E F G H J K L M N P MGFR-6 32 M x 1.5 1/8 NPT N/ MGFR-8 32 M x 1.5 1/4 NPT N/ RCKET INCLUDED M MGFR M x 1.5 1/4 NPT G 1/ D L N MGFR M x 1.5 3/8 NPT G 1/ MGFR-15 M55 x 2. 1/2 NPT G 1/ MGFR M68 x 1.5 3/4 NPT G 1/ MGFR M68 x NPT G 1/ E Performance Data MGFR Flow Characteristics MGFR Regulation Characteristics MGFR MGFR 32 Set Point Inlet Pressure (psi) 32 Set Point Inlet Pressure (psi) MGFR MGFR MGFR 32 Set Point Inlet Pressure (psi) MGFR6 32 Set Point Inlet Pressure (psi) 8.7 For Technical ssistance:

8 MFD ir Preparation Equipment MGFC Series Fluid Model MGFC-6-S MGFC-8-S MGFC-8 MGFC- MGFC-15 Port size 1/8 NPT 1/4 NPT 1/4 NPT 3/8 NPT 1/2 NPT Type Filtering Pressure Range Proof Pressure Temperature Range ir Relieving regulators with push to lock adjustment knobs µ standard (5µ optional) to 1 PSI 215 PSI to 16 F Drain owl Capacity.34 FL OZ 1.35 FL OZ 2.7 FL OZ Oil owl Capacity.85 FL OZ 2.5 FL OZ 5.4 FL OZ owl Material Polycarbonate bowl Polycarbonate owl with Metal owl Guard ody Material Mounting Recommended Lubricant luminum T-racket Non-Detergent SE, ISO VG32, or equivalent Drain Semi-auto uto Includes FRL Combination T-racket / Nut Dimensions (mm, except where noted) T SHPE RCKET INCLUDED F G J K Model C D E F G H J K L MGFC-6-S 62 1/8 NPT N/ M x C D H L MGFC-8-S 62 1/4 NPT N/ M x MGFC /4 NPT G 1/8 M x MGFC /8 NPT G 1/8 M x MGFC /2 NPT G 1/4 M55 x E Performance Data MGFC MGFC Flow Characteristics MGFC Regulation Characteristics MGFC Set Point 26 1 Inlet Pressure (psi) MGFC 32 Set Point Inlet Pressure (psi) MGFC Set Point 26 1 Inlet Pressure (psi) 8.8

9 MFD ir Preparation Equipment MGZ Series Pressure Relief Valve P R Fluid Model MGZ-6-T MGZ-8-T MGZ-8-T MGZ--T MGZ-15-T Port Size 1/8 NPT 1/4 NPT 1/4 NPT 3/8 NPT 1/2 NPT cting Type Valve Type Pressure Range Proof Pressure Temperature Range ody Material Operating ngle Includes FRL ccessories ir Manual 3 ports - 2 position to 1 PSI 215 PSI to 16 F luminum 9 (Twist) T-racket and Stamped Steel racket and Lock ir Preparation Equipment Manual Pneumatic Isolation Valves - PIV Series Dimensions (mm, except where noted) M F C G RCKET INCLUDED T-racket Included H J L K 2 - D E N Model C D E F G H J K L M N MGZ-6-T /8 NPT /4 NPT MGZ-8-T /4 NPT /4 NPT MGZ-8-T /4 NPT /8 NPT MGZ--T /8 NPT /8 NPT MGZ-15-T /2 NPT /2 NPT 8.9 For Technical ssistance:

10 MFD ir Preparation Equipment MGV Series Soft Start-up Valve FRL ccessories Model MGV-6-T-24VDC MGV-8-T-24VDC MGV-8-T-24VDC MGV--T-24VDC MGV-6-T-1VC MGV-8-T-1VC MGV-8-T-1VC MGV--T-1VC MGV-15-T-24VDC MGV-15-T-1VC Fluid ir Port Size 1/8 NPT 1/4 NPT 1/4 NPT 3/8 NPT 1/2 NPT Exhaust Port Size 1/4 NPT 3/8 NPT 1/2 NPT cting Type Solenoid Operated, 3/2 Soft-Start Pressure Range 35 to 1 PSI Proof Pressure 215 PSI Temperature Range to 16 F Power Connection DIN P Voltage 1 VC or 24 VDC Voltage Range -15%~+% R Insulation Power Consumption Class 1 VC: 3.5V / 24 VDC: 2.5W Includes T-racket and Stamped Steel racket Dimensions (mm, except where noted) J K RCKET INCLUDED H G E C (2) T-racket Included D F M L Model C D E F G H J K L M MGV-6 1/8 NPT /4 NPT MGV-8 1/4 NPT /4 NPT MGV-8 1/4 NPT /8 NPT MGV- 3/8 NPT /8 NPT MGV-15 1/2 NPT /2 NPT 8.

11 MFD ir Preparation Equipment MG series ir Distribution lock Dimensions (mm, except where noted) FRL ccessories Model MG214-6-T MG214-8-T MG314-8-T MG314--T MG T Fluid ir Port Size 1/8 NPT 1/4 NPT 1/4 NPT 3/8 NPT 1/2 NPT # of uxiliary Ports 2 Pressure Range to 1 PSI Proof Pressure 215 PSI Temperature Range to 16 F Includes T-racket ir Preparation Equipment Manual Pneumatic Isolation Valves - PIV Series (4) Model C D MG214-6-T 1/8 NPT MG214-8-T 1/4 NPT MG314-8-T 1/4 NPT MG314--T 3/8 NPT MG T 1/2 NPT C D T-racket Included 8.11 For Technical ssistance:

12 MFD ir Preparation Equipment Mounting ccessories T racket Dimensions (mm, except where noted) J E F Model C D E F G H J MG1-P MG1-P MG1-P MG61-P C H G D L racket Model C D E F G H J E J MG2-P MG2-P F MG2-P C D G H MG62-P U racket Model C D E D MG3-P MG3-P C E MG3-P MG63-P Filter Elements Model Description MGF-4-1 Series - Micron Element Filter ronze MGF-4-2 Series - 5 Micron Element Filter Plastic MGF-4-1 Series - Micron Element Filter ronze MGF-4-2 Series - 5 Micron Element Filter Plastic MGF-4-1 Series - Micron Element Filter ronze MGF-4-2 Series - 5 Micron Element Filter Plastic MGF Series - Micron Element Filter ronze MGF Series - 5 Micron Element Filter ronze 8.12

13 MFD ir Preparation Equipment List Prices Filters Model Number Description Nominal List Price MGF-6-S Filter, 1/8 NPT, Semi-uto Drain 18- $14.15 MGF-8-S Filter, 1/4 NPT, Semi-uto Drain MGF-8 Filter, 1/4 NPT, uto Drain MGF-8-S Filter, 1/4 NPT, Semi-uto Drain MGF- Filter, 3/8 NPT, uto Drain MGF--S Filter, 3/8 NPT, Semi-uto Drain MGF-15 Filter, 1/2 NPT, uto Drain MGF-15-S Filter, 1/2 NPT, Semi-uto Drain MGF6- Filter, 3/4 NPT, uto Drain MGF6--S Filter, 3/4 NPT, Semi-uto Drain MGF6-25 Filter, 1 NPT, uto Drain MGF6-25-S Filter, 1 NPT, Semi-uto Drain Regulators ir Preparation Equipment Manual Pneumatic Isolation Valves - PIV Series Model Number Description Nominal List Price MGR-6 Regulator, 1/8 NPT, 1 psi Gauge, racket 18- $22.5 MGR-6-L Regulator, 1/8 NPT, 6 psi Gauge, racket MGR-8 Regulator, 1/4 NPT, 1 psi Gauge, racket MGR-8-L Regulator, 1/4 NPT, 6 psi Gauge, racket MGR-8 Regulator, 1/4 NPT, 1 psi Gauge, racket MGR-8-L Regulator, 1/4 NPT, 6 psi Gauge, racket MGR- Regulator, 3/8 NPT, 1 psi Gauge, racket MGR--L Regulator, 3/8 NPT, 6 psi Gauge, racket MGR-15 Regulator, 1/2 NPT, 1 psi Gauge, racket MGR6- Regulator, 3/4 NPT, 1 psi Gauge, racket MGR6-25 Regulator, 1 NPT, 1 psi Gauge, racket Lubricators Model Number Description Nominal List Price MGL-6 Lubricator, 1/8 NPT, racket 18- $12. MGL-8 Lubricator, 1/4 NPT, racket MGL-8 Lubricator, 1/4 NPT, racket MGL- Lubricator, 3/8 NPT, racket MGL-15 Lubricator, 1/2 NPT, racket MGL6- Lubricator, 3/4 NPT, racket MGL6-25 Lubricator, 1 NPT, racket ll product is sold F.O.. shipping point. Prices are subject to change without notice For Technical ssistance:

14 MFD ir Preparation Equipment List Prices Filter-Regulator Combination Units Model Description Nominal List Price MGFR-6-S Filter/Regulator, 1/8 NPT, Semi-uto Drain 18- $25.19 MFR-8-S Filter/Regulator, 1/4 NPT, Semi-uto Drain MGFR-8 Filter/Regulator, 1/4 NPT, uto Drain MGFR-8-S Filter/Regulator, 1/4 NPT, Semi-uto Drain MGFR- Filter/Regulator, 3/8 NPT, uto Drain MGFR--S Filter/Regulator, 3/8 NPT, Semi-uto Drain MGFR-15 Filter/Regulator, 1/2 NPT, uto Drain MGFR-15-S Filter/Regulator, 1/2 NPT, Semi-uto Drain MGFR6- Filter/Regulator, 3/4 NPT, uto Drain MGFR6--S Filter/Regulator, 3/4 NPT, Semi-uto Drain MGFR6-25 Filter/Regulator, 1 NPT, uto Drain MGFR6-25-S Filter/Regulator, 1 NPT, Semi-uto Drain Filter-Regulator Combo + Lubricator Model Number Description Nominal List Price MGFC-6 Filter/Regulator/Lube, 1/8 NPT, Semi-uto Drain 18- $. MGFC-8 Filter/Regulator/Lube, 1/4 NPT, Semi-uto Drain 18-. MGFC-8 Filter/Regulator/Lube, 1/4 NPT, Semi-uto Drain MGFC- Filter/Regulator/Lube, 3/8 NPT, uto Drain MGFC-15 Filter/Regulator/Lube, 1/2 NPT, uto Drain Solenoid Operated Soft-Start Valves Model Number Description Nominal List Price MGV-6-T-1VC Soft Start Valve, 1/8IN NPT, racket, 1VC 18- $57.78 MGV-6-T-24VDC Soft Start Valve, 1/8IN NPT, racket, 24VDC MGV-8-T-1VC Soft Start Valve, 1/4IN NPT, racket, 1VC MGV-8-T-24VDC Soft Start Valve, 1/4IN NPT, racket, 24VDC MGV-8-T-1VC Soft Start Valve, 1/4IN NPT, racket, 1VC MGV-8-T-24VDC Soft Start Valve, 1/4IN NPT, racket, 24VDC MGV--T-1VC Soft Start Valve, 3/8IN NPT, racket, 1VC MGV--T-24VDC Soft Start Valve, 3/8IN NPT, racket, 24VDC MGV-15-T-1VC Soft Start Valve, 1/2IN NPT, racket, 1VC MGV-15-T-24VDC Soft Start Valve, 1/2IN NPT, racket, 24VDC Manually Operated Shut-Off / Relief Valves Model Number Description Nominal List Price MGZ-6-T Pressure Relief Valve, 1/8IN NPT, Stamped racket 18- $22.6 MGZ-8-T Pressure Relief Valve, 1/4IN NPT, Stamped racket MGZ-8-T Pressure Relief Valve, 1/4IN NPT, Stamped racket MGZ--T Pressure Relief Valve, 3/8IN NPT, Stamped racket MGZ-15-T Pressure Relief Valve, 1/2IN NPT, Stamped racket ll product is sold F.O.. shipping point. Prices are subject to change without notice. 8.14

15 MFD ir Preparation Equipment List Prices uxiliary ir Porting locks Model Number Description List Price MG214-6-T ir Distribution lock, 1/8IN NPT with T racket $.49 MG214-8-T ir Distribution lock, 1/4IN NPT with T racket.49 MG314-8-T ir Distribution lock, 1/4IN NPT with T racket MG314--T ir Distribution lock, 3/8IN NPT, racket MG T ir Distribution lock, 1/2IN NPT, racket ir Preparation Equipment Modular Connector rackets Model Number Description List Price MG1-P1 Series T racket $4.75 MG2-P1 Series L racket 4. MG3-P1 Series U racket 4. MG1-P1 Series T racket 8. MG2-P1 Series L racket 6.9 MG3-P1 Series U racket 6.9 MG1-P1 Series T racket 8.75 MG2-P1 Series L racket 8.5 MG3-P1 Series U racket 8.5 MG61-P1 6 Series T racket.75 MG62-P1 6 Series L racket 9.25 MG63-P1 6 Series U racket 9.25 Manual Pneumatic Isolation Valves - PIV Series Replacement Filter Elements Model Number Description List Price MGF-4-1 Series, Micron Element $1. MGF-4-2 Series, 5 Micron Element 1. MGF-4-1 Series, Micron Element 2. MGF-4-2 Series, 5 Micron Element 2. MGF-4-1 Series, Micron Element 3.75 MGF-4-2 Series, 5 Micron Element 3.75 MGF Series, Micron Element 12. MGF Series, 5 Micron Element 12. For 5 micron filter element, add -W to model number and $3. LIST ll product is sold F.O.. shipping point. Prices are subject to change without notice For Technical ssistance:

16 imba Manual Pneumatic Isolation Valves - PIV Series Pneumatic Isolation Valves are typically the first valve following the FRL components in the line supplying compressed air to pneumatic equipment. FRL PIV Valve Operating Valve Pneumatic System Pneumatic Isolation Valves are the critical component in any safety lockout, tagout system. vailable sizes range from 1/4" inlet/outlet ports with 3/8" exhaust ports up to 1-1/2" inlet/outlet ports with 2" exhaust ports. vailable accessories include air mufflers, pressure switches, and air pressure visual indicators, and connecting hex nipples. List Prices Valves Part Number Inlet/Outlet Port Size Exhaust Port Size Note: The part numbers have been configured to provide information on applicable FRL series and port sizes. There is some overlap in the applicable FRL series. In/Out For example: PIV (Pneumatic Isolation Valve) - 6 (6 series FRL) - (Inlet/Outlet Port Size) - 75 (Exhaust Port Size) Cv Exhaust List Price PIV--25/38 1/4 NPT 3/8 NPT $79.35 PIV--38/38 3/8 NPT 3/8 NPT PIV--38/75 3/8 NPT 3/4 NPT PIV-6-/75 1/2 NPT 3/4 NPT PIV-6-75/75 3/4 NPT 3/4 NPT PIV-6-75/125 3/4 NPT 1-1/4 NPT PIV-7-/125 1 NPT 1-1/4 NPT PIV-7-125/ /4 NPT 1-1/4 NPT PIV-7-1/ 1-1/2 NPT 2 NPT Referenced Standards: ll standards are subject to revision. Parties are encouraged to investigate and apply the most recent editions of the standards indicated below. OSH 29 CFR ISO 14118: CS Z142-2 EN 37 CS Z46-5 NSI/SSE Z ISO NSI/PMMI ll product is sold F.O.. shipping point. Prices are subject to change without notice. 8.16

17 imba Manual Pneumatic Isolation Valves - PIV Series ccessories Part Number Description Port Size verage Cv List Price PIV-SIL-13 ir Muffler 1/8 NPT 2. $13.8 PIV-SIL-25 ir Muffler 1/4 NPT PIV-SIL-38 ir Muffler 3/8 NPT PIV-SIL-38-HF ir Muffler (High Flow) 3/8 NPT PIV-SIL- ir Muffler 1/2 NPT PIV-SIL-75 ir Muffler 3/4 NPT PIV-SIL-75-HF ir Muffler (High Flow) 3/4 NPT PIV-SIL- ir Muffler 1 NPT PIV-SIL-125 ir Muffler 1-1/4 NPT *PIV-SIL- ir Muffler 2 NPT CK-1/8 Hex Nipple 1/8 NPT N/ 3.45 CK-1/4 Hex Nipple 1/4 NPT N/ 4. CK-3/8 Hex Nipple 3/8 NPT N/ 4. CK6-1/2 Hex Nipple 1/2 NPT N/ 5.75 CK6-3/4 Hex Nipple 3/4 NPT N/ 9. CK7-1 Hex Nipple 1 NPT N/ 14.7 CK7-1-1/4 Hex Nipple 1-1/4 NPT N/ CK7-1-1/2 Hex Nipple 1-1/2 NPT N/ 53. ir Preparation Equipment Manual Pneumatic Isolation Valves - PIV Series Caution Note: Mufflers only rated to 1 psi. *Note: This size contains female threads. ll other sizes are male threaded. Dimensions PIV Valves Part Number In-Out Port Size ll dimensions are inches. Exhaust Port Size C D E F G H I J K PIV--25/38 1/4 3/ PIV--38/38 3/8 3/ ll product is sold F.O.. shipping point. Prices are subject to change without notice For Technical ssistance:

18 imba Manual Pneumatic Isolation Valves - PIV Series Dimensions PIV Valves PIV-7-1/ Only E H G PORT 2 (OUTLET) PORT 1 (INLET) PORT 2 (OUTLET) PORT 1 (INLET) F F 2X I THRU D 2X I THRU PORT 3 D (EXHUST) PORT 3 (EXHUST) C H G C Part Number In-Out Port Size Exhaust Port Size (open) (open) C D E F G H I PIV--38/75 3/8 3/ PIV-6-/75 1/2 3/ PIV-6-75/75 3/4 3/ PIV-6-75/125 3/4 1-1/ PIV-7-/ / PIV-7-125/ /4 1-1/ PIV-7-1/ 1-1/ ll dimensions are inches. ir Mufflers Part Number Port Size PIV-SIL-13 1/ PIV-SIL-25 1/ PIV-SIL-38 3/ PIV-SIL-38-HF 3/ PIV-SIL- 1/ PIV-SIL-75 3/ PIV-SIL-75-HF 3/ PIV-SIL PIV-SIL / *PIV-SIL ll dimensions are inches. * Note: The PIV-SIL- contains female threads. ll other sizes are male threaded. Hex Nipples Part Number Thread Size Material CK-1/8 1/8 NPT 1.6 7/16" lack Oxide Steel CK-1/4 1/4 NPT 1. 5/8" lack Oxide Steel CK-3/8 3/8 NPT /4" Zinc Plated Steel CK6-1/2 1/2 NPT /8" Zinc Plated Steel CK6-3/4 3/4 NPT /8" Zinc Plated Steel CK7-1 1 NPT /8" Zinc Plated Steel CK7-1-1/4 1-1/4 NPT /4" Zinc Plated Steel CK7-1-1/2 1-1/2 NPT " Zinc Plated Steel 8.18

19 imba Manual Pneumatic Isolation Valves - PIV Series Pneumatic Energy Release Verification Options Visual Pop-Up Indicator or Pressure Switch (electrical) May be installed on all PIV valves with pressure sensing port Provides a means to verify the release of downstream pressure to next obstruction. Verification Option Model Number Inlet Port Size* List Price Pop-Up Indicator PIV-POI 1/8 $.65 Pressure Switch PIV-PS 1/ * NPT port threads. ir Preparation Equipment Pop-Up Indicator Pressure Switch Manual Pneumatic Isolation Valves - PIV Series Pressure Switch Specifications Parameters Maximum Operating Pressure Set Point Tolerance Diaphragm Material Proof Pressure Specifications 6 psig (41 bar) ±1 psi or 5% (.7 bar) una N Differential 8-16% Current Rating Media Connection (2) Circuit Form (C) Electrical Connection (HR) 18 psi (124 bar) 2 VC VDC (Resistive) 1/8" NPT Male DT (Single Pole - Double Throw) DIN436 Wiring Diagram PIV Sensing Port PIV Sensing Port - imba Pneumatic Isolation Valves are provided with 1/8 NPT sensing ports, enabling installation of a pressure sensing device such as the Pop-Up Indicator or Pressure Switch shown above. Standards suggest that machine design should include a method for verifying the release of energy after lockout. The imba Pop-Up Indicator is constructed for the industrial environment with a brass body and 1/8" NPT connection. It offers 36 visibility and a redundant verification feature. y pushing on the red plunger, the operator can feel the presence of pressure and verify that the indicator is performing its sensing function. The imba Pressure Switch offers an electronic pressure sensing option that can be integrated into a safety monitoring system, which confirms energy isolation throughout the circuit. ll product is sold F.O.. shipping point. Prices are subject to change without notice For Technical ssistance:

20 imba Manual Pneumatic Isolation Valves - PIV Series How it Works 12 2 Manual PIV valve shown in the closed position. The valve can only be locked in the closed position. 3 1 Push/pull operation - Push the handle inward to exhaust downstream air (lockable in this position). Pull the handle outward to supply air downstream. Following any FRL components, an energy isolation valve is usually the first valve in the line supplying compressed air to equipment. The energy isolation valve should provide a quick means of shutting off the supply of air and exhausting the downstream lines. The imba PIV valve has a large red operating handle for high visibility. When the handle is pulled out, there is full line pressure. short, full inward push of the handle closes off the flow of air, and quickly exhausts the pressure in the downstream line. This action is swift and doesn t require a difficult, slow, or confusing twisting action. PIV- Series Valve Operation VLVE CLOSED When the red handle is pushed inward, the flow of supply air is blocked and downstream air is exhausted via the exhaust port. While servicing or maintaining machinery, the PIV valve should be padlocked in this position to prevent the handle from being pulled outward inadvertently where potential for human injury exists. 2 (out) 1 (in) 3 (exhaust) VLVE OPEN When the red handle is pulled outward supply air flows freely from inlet to outlet and flow to exhaust is blocked. detent keeps the handle in the open position. 2 (out) 1 (in) 3 (exhaust) STNDRD SPECIFICTIONS: mbient/media Temperature: to 175 F (4 to 8 C). Flow Media: Filtered air; 5 micron recommended. Inlet Pressure: 15 to 145 psig (1 to bar). Port Threads: NPT standard. Lock Hole Diameter:.27 inch (7.6 mm). Length of Hole:.43 inch (.92 mm). NOTE: Per specifications and regulations, these products are defined as energy isolation devices, NOT S EMERGENCY STOP DEVICES. 8.

21 imba Manual Pneumatic Isolation Valves - PIV Series PIV-6 Series VLVE CLOSED With a short push of the red handle inward, the flow of supply air is blocked and downstream air is exhausted via the exhaust port at the bottom of the valve. The PIV valve should be padlocked in this position to prevent the handle from being pulled outward inadvertently where potential for human injury exists or while servicing machinery. 2 (out) Valve Operation 3 (exhaust) 1 (in) STNDRD SPECIFICTIONS: mbient/media Temperature: o to 175 o F (4 o to 8 o C). Flow Media: Filtered air; 5 micron filter recommended. Inlet Pressure: 15 to psig (1 to bar). VLVE OPEN When the red handle is pulled out, supply air flows freely from inlet to outlet and flow to exhaust is blocked. detent keeps the handle in the open position. The handle is not designed to be locked in this position, thereby providing for ready shut-off when necessary. 2 (out) 3 (exhaust) 1 (in) Port Threads: NPT standard. NOTE: Per specifications and regulations, these products are defined as energy isolation devices, NOT S EMER- GENCY STOP DEVICES. ir Preparation Equipment Manual Pneumatic Isolation Valves - PIV Series PIV-7 Series VLVE CLOSED With a short push of the red handle inward, the flow of supply air is blocked and downstream air is exhausted via the exhaust port while servicing or maintaining machinery. Padlock the PIV valve in this position to prevent the handle from being pulled outward inadvertently to avoid potential for human injury while servicing machinery. VLVE OPEN When the red handle is pulled out, supply air flows freely from inlet to outlet and flow to exhaust is blocked. detent keeps the handle in the open position. The handle is not designed to be locked in this position, thereby providing for ready shut-off when necessary. STNDRD SPECIFICTIONS: mbient/media Temperature: to 175 F (4 to 8 C). Flow Media: Filtered air; 5 micron recommended. Inlet Pressure: 15 to psig (1 to bar). Port Threads: NPT standard. Lock Hole Diameter:.38 inch (9.6 mm). Length of Hole:.75 inch (19.1 mm). NOTE: Per specifications and regulations, these products are defined as energy isolation devices, NOT S EMERGENCY STOP DEVICES For Technical ssistance:

22 imba Manual Pneumatic Isolation Valves - PIV Series Referenced Standards: ll standards are subject to revision. Parties are encouraged to investigate and apply the most recent editions of the standards indicated below. OSH 29 CFR ISO 14118: CS Z142-2 EN 37 CS Z46-5 NSI/SSE Z ISO NSI/PMMI What does this regulation cover? In general terms, the rule requires that energy sources (pneumatic, electric, hydraulic, etc.) be shut off or disconnected while equipment is being serviced. Furthermore, the disconnected valve or switch must be locked to prevent reactivation while anyone is working on the equipment. In the case of air-operated equipment, a lockout valve must be used to cut off the air supply to the equipment and exhaust any stored or residual downstream air. (OSH Regulation 29 CFR lists a number of requirements for the control of hazardous energy sources.) In addition, imba PIV products assist manufacturers in complying with European regulation EN 37 (Safety of Machinery). For complete information, please read the entire regulations. Does this regulation apply to you? n estimated 631, businesses are affected by this OSH regulation. The majority of those affected are in the manufacturing and servicing industries. mong individual workers, equipment operators and those performing service on equipment are at the greatest risk of injury. Workers involved with packaging equipment, presses, and conveyor systems are also said to be at high risk. Who benefits? The Secretary of Labor says the procedures were developed to protect 39 million merican workers from injury, and more than six percent of all workplace deaths can be eliminated in the affected industries. Statistics indicate that implementation of the regulation could prevent 1 deaths and 6, injuries annually. How can this regulation be addressed? Guidelines for a Safe Workplace The rule requires equipment to have energy isolation devices (to isolate the equipment from its energy sources), and that such devices be capable of being locked in the off position. Formal procedures must be established to de-energize the equipment, isolate it, and ensure that any stored energy (for example, air pressure trapped downstream in a system) has been dissipated. Employee training in these procedures is mandatory. If your company uses pneumatically-controlled equipment, or if you are a manufacturer of pneumatically operated equipment, OSH rules can have a substantial effect on your business. s an employer, compliance may involve modifications to the air control systems for equipment in your plant. s a manufacturer, the new machines or equipment you deliver should include lockout-and-exhaust devices as a part of your standard package. 8.22

23 imba Manual Pneumatic Isolation Valves - PIV Series Key points regarding the control of pneumatic energy: Shut-off valve required Each piece of equipment must have a shut-off valve to isolate the equipment from its air supply and so render the equipment inoperative. Shut-off valve should be lockable The valve is lockable if it is designed to allow the use of a padlock to keep the valve in the closed position. Pressurized downstream air must be relieved In addition to locking out the air supply, all downstream air must be depressurized by providing an exhaust to atmosphere. Workers must also verify isolation and de-energizing, while being certain there is no reaccumulation of pressurized air during service or maintenance activities. Tagout may replace lockout only under certain circumstances (1) If energy isolation device cannot be locked out; Guidelines for a Safe Workplace (2) If employer shows that tagout provides safety equivalent to lockout. Whenever major replacement, repair, renovation, or modification of equipment is performed, or when new equipment is installed, energy isolating devices for such equipment must be designed to accept a lockout device. ir Preparation Equipment Manual Pneumatic Isolation Valves - PIV Series The imba PIV dvantage FETURES Teflon Seals Standard Integral Pressure Sensing Port Highest Flow Rates Push/Pull ctivation Valve can only be locked in the Off position Full or oversized exhaust ports ENEFITS Competitor s nitrile seals can extrude into the bore and stick; Teflon insures easy motion even after long periods of non-use. NSI/PMMI compliance; competitors need to T the line and add additional components. Quicker exhaust means more machine up time. Easy operation (NSI/PMMI) NSI/PMMI compliance; competitive rotary models can be locked in the partially on position which is a safety hazard and not in compliance with existing standards. NSI/PMMI compliance requires the exhaust port size to be greater than or equal to the supply port size. Many competitors have exhaust ports smaller than their supply ports. ll product is sold F.O.. shipping point. Prices are subject to change without notice For Technical ssistance:

24 Notes 8.24

25 Notes 8.25

26 Notes 8.26