Installation Instructions GOOSENECK MOUNTING KIT Ford F-250/F-350 Super Duty Will not fit Cab-on-Chassis vehicles

Size: px

Start display at page:

Download "Installation Instructions GOOSENECK MOUNTING KIT Ford F-250/F-350 Super Duty Will not fit Cab-on-Chassis vehicles"

Lesley James
5 years ago
Views:

1 Instlltion Instuctions od -250/-350 Sup Duty Will not fit Cb-on-Chssis vhicls Pt Nubs: Equipnt Rquid: stn Kit: Wnchs: 7/16, 9/16, 5/8, /16, 3/4, /16, 13 Dill Bits: 1/4 Oth Tools: Dill WARNING: Und no cicustncs do w cond xcding th towing vhicl nufctus condd d vhicl towing cpcity. 9460/9470 HIDE-A-GOOSE HITCH INSTALLATION Pssng s sid U-Bolt instlld vhicl fowd of shock ount Vhicl owd 5/8 stns o Hitch stn Kit NOTE Vhicl bd coss-bs not shown fo clity. All hols nd slots typicl on both sids of vhicl igu 1 Qty. (2) U-Bolt, 1/2-13 Qty. (2) lt Wsh, 1/4 Qty. (4) lt Wsh, 1/2 12 Qty. (1) Nylock Nut, 1/4 Qty. (4) Lock Wsh, 1/2 13 Qty. (1) Hx Bolt with Wsh, M8 X 1.25 X 35 Qty. (4) Hx Nut, 1/2 Qty. (2) Hx Nut, M8 Qty. (6) 5/8 Conicl Toothd Wsh Qty. (2) Conicl Wsh, 3/8 Qty. Qy (1) Cbl Ti (not shown) 16 Qty. Qy (2) Spc, 3/8 X 1.50 X 2.00 Qty. (6) Hx Nut, 5/8 17 Qty. (2) Locknut, 7/16- Qty. (2) Cig Bolt, 5/8- X 2.50 GR5 18 Qty. (2) Hx Bolt, 7/16- X 1.50 Qty. (2) Block, 5/8 X 1.50 X Qty. (4) Shis, 1/4 X 2.00 X 1.00 Qty. (1) Hx Bolt, 1/4-20 X 1.25

Wning: Instlltion Instuctions od -250/-350 Sup Duty Will not fit Cb-on-Chssis vhicls NOTES: This il kit cn b usd with 9460 o 9470 hd only. Alwys k su th bll is fully lockd bfo towing.

2 Wning: Instlltion Instuctions od -250/-350 Sup Duty Will not fit Cb-on-Chssis vhicls NOTES: This il kit cn b usd with 9460 o 9470 hd only. Alwys k su th bll is fully lockd bfo towing. Kp th bll nd bll slv wll lubictd. Piodiclly -toqu ll th hitch fstns. Chck bll, hitch coupl, sfty chins nd oth connctions fo pop option vy ti you tow. Th tow vhicl nufctus condd towing cpcitis should UNDER NO CIRCUMSTANCES b xcdd. Pt Nubs: Chck fo dqut clnc btwn th goosnck til nd th of th cb nd th of th tuck box bfo instlling hitch. All tucks hv ful lins, bk lins nd lcticl wiing loctd long th vhicl f wh th il kit instlls. Cfully xin th loction of ful lins, bk lins nd lcticl wis bfo instlltion nd b ctin not to dg ths whn positioning th hitch coponnts. B cful whn dilling hols, cutting sht tl nd tightning fstns s to not liit th intgity of ths systs. Hid-A-Goos Only Dilld hol in bd loction (s stp 8). Shot Box & Long Box 46-3/16 inchs Hid-A-Goos Instlltion Instuctions 1. Low th vhicl xhust. 2. Us th povidd cbl ti to loct th lins connctd to th bckt on th div s sid of th vhicl, shown in igu 2. 2b. On Gs Engin Vhicls Only. Th vpo tub unning long th insid of th div s sid f il ust b loctd pio to instlling th div s sid bckt (s igu 2b). Rov th flng nut fo th outsid of th f nd kp fo lt us (s igu 2c). Rott th tubs up nd out of th wy. Instll th L-bckt with 1/4 hdw, s shown in igu 2d. Tightn th L-bckt to th f, but lv th tub hold loos to id bckt instlltion. Th tub hold will b tightnd onto th L-bckt in Stp 12. Rloct Lins ul Tnk Div s sid f il flng nut Div s sid f il 12 igu 2 3. Plc 5/8 GR8 cig bolts fo th 9460/9470 fstn kit into th squ hols on th fowd nd wd coss bs fo th top pointing towds th gound. Th fowd coss b hs two dditionl hols (s figu 3). 4. o undnth th vhicl, instll th wd hitch coss b by plcing on nd bov th vhicl f nd nuving th notchd sction of th opposit nd, bov th vhicl f. Tpoily position th wd hitch coss b ginst th ht chnnl of th vhicl. 5. o undnth th vhicl instll th fowd hitch coss b by plcing th div s sid notchd nd bov th vhicl f nd nuving th opposit notchd nd bov th xhust nd bov th vhicl f. Vpo tub Tub hold igu 2b Insid of f il igu 2c igu 2d flng nut L-bckt ont Ht Chnnl ont Ht Chnnl Cig Bolts Cig Bolts Additionl Hols R Ht Chnnl R Ht Chnnl R Coss Mb Instlltion igu 3 owd Coss Mb Instlltion

3 Instlltion Instuctions od -250/-350 Sup Duty Will not fit Cb-on-Chssis vhicls Pt Nubs: 6. Loosly instll th div s sid nd pssng s sid hitch sid bckts by ttching th 5/8 hdw to th thdd studs. Instll th 5/8 X 2.50 cig bolts though th hitch sid bckts, 5/8 blocks nd th lg slots in th vhicl f ils. Loosly, instll th 5/8 Conicl Toothd Wshs nd 5/8 hx nuts to th cig bolts (s igu 1). 7. Us th supplid U-Bolt fo th fowd ttchnt of th bckt to th f (s igu 4). Position th U-Bolt fo th insid of th vhicl f pointing towds th hitch sid bckt. On th pssng s sid of th vhicl, th U-Bolt ust b positiond to th vhicl fowd sid of th shock ount nd instlld on n ngl though th ounting slots on th hitch sid bckt. U-Bolt Vhil Vhicl owd igu 4 8. Whn instlling th 9460/9470 Hid-A-Goos hitch, hol ust b dilld in th bd of th tuck. Mk nd dill 1/4 inch hol 46-3/16 inchs (shot & long box) fo th of th bd nd cntd btwn th whl wlls. Using hol sw nlg th pilot hol to finl dit hol siz. Rf to th 9460/9470 Hid-A-Goos hitch instuction sht fo hol siz. 9. Loosly instll th 9460/9470 Hid-A-Goos hitch. Rf to th 9460/9470 instuction sht fo fstns nd loctions.. Aft loosly instlling th Hid-A-Goos hitch nd ounting kit, lin up th hitch bll slv with th opning in th tuck bd. Toqu ll 5/8- GR5 fstns to 0 ft.-lb. (203 N-), 1/2-13 GR5 fstns to 75 ft.-lb. (2 N-), nd 5/8- GR8 fstns on th hitch to 212 ft.-lb. (287 N-). Us th following squnc: ) toqu f bckts to th f of th vhicl, b) toqu coss bs to th f bckts, c) toqu hitch to coss bs.. On Gs Engin Vhicls Only Us th fctoy flng nut tht ws ovd in Stp 2 to tightn th tub hold onto th L- bckt s shown in igu 2d. 12. On so vhicls th Hid-A-Goos hndl y contct th gncy bk cbl. Th bk cbl bckt should b djustd to povid clnc. 13. Ri Rinstll xhust s shown blow. bl Exhust instlltion:. If th is lss thn ½ clnc btwn th xhust pip nd th Hid-A-Goos coss bs, th xhust bckt supplid with th ounting kit ust b usd (S figu 5 nd 5b). o th ttchnt (igu 5), fstn th supplid bckt xtnsion to th fctoy bckt with th fctoy M8 bolts, thn fstn th xtnsion to th f with th supplid hdw. Rttch th xhust bckt fowd of th xl to th f coss b with 3/8 spcs sndwichd btwn th bckt nd coss b. Exhust bckt 13 coss b 16 ctoy nuts Mounting bckt igu 5 R Attchnt ctoy bolts igu 5b Cnt Attchnt

4 Instlltion Instuctions od -250/-350 Sup Duty Will not fit Cb-on-Chssis vhicls Pt Nubs: Equipnt Rquid: stn Kit: Wnchs: 7/16, 9/16, 5/8, /16, 3/4, /16, 13 Dill Bits: 1/4 Oth Tools: Dill WARNING: Und no cicustncs do w cond xcding th towing vhicl nufctus condd d vhicl towing cpcity. 6300/8339/83391/83399 GOOSENECK HITCH INSTALLATION 5/8 stns o Hitch stn Kit Vhicl owd NOTE Vhicl bd coss-bs not shown fo clity. All hols nd slots typicl on both sids of vhicl igu 1 Qty. (2) U-Bolt, 1/2-13 Qty. (2) lt Wsh, 1/4 Qty. (4) lt Wsh, 1/2 12 Qty. (1) Nylock Nut, 1/4 Qty. (4) Lock Wsh, 1/2 13 Qty. (1) Hx Bolt with Wsh, M8 X 1.25 X 35 Qty. (4) Hx Nut, 1/2 Qty. (2) Hx Nut, M8 Qty. (6) 5/8 Conicl Toothd Wsh Qty. (2) Conicl Wsh, 3/8 Qty. Qy (1) Cbl Ti (not shown) 16 Qty. Qy (2) Spc, 3/8 X 1.50 X 2.00 Qty. (6) Hx Nut, 5/8 17 Qty. (2) Locknut, 7/16- Qty. (2) Cig Bolt, 5/8- X 2.50 GR5 18 Qty. (2) Hx Bolt, 7/16- X 1.50 Qty. (2) Block, 5/8 X 1.50 X Qty. (4) Shis, 1/4 X 2.00 X 1.00 Qty. (1) Hx Bolt, 1/4-20 X 1.25

5 Instlltion Instuctions od -250/-350 Sup Duty Will not fit Cb-on-Chssis vhicls Pt Nubs: Wning: NOTES: This il kit cn b usd with 6300, 8339, 83391, hd only. Alwys k su th bll is fully lockd bfo towing. Kp th bll nd bll pockt wll lubictd. Piodiclly -toqu ll th hitch fstns. Chck bll, hitch coupl, sfty chins nd oth connctions fo pop option vy ti you tow. Th tow vhicl nufctus condd towing cpcitis should UNDER NO CIRCUMSTANCES b xcdd. Chck fo dqut clnc btwn th goosnck til nd th of th cb nd th of th tuck box bfo instlling hitch. All tucks hv ful lins, bk lins nd lcticl wiing loctd long th vhicl f wh th il kit instlls. Cfully xin th loction of ful lins, bk lins nd lcticl wis bfo instlltion nd b ctin not to dg ths whn positioning th hitch coponnts. B cful whn dilling hols, cutting sht tl nd tightning fstns s to not liit th intgity of ths systs Rov-A-Bll nd 8339, 83391, old Down Goosnck Instlltion 1. Low th vhicl xhust. 2. On Gs Engin Vhicls Only. Th vpo tub unning long th insid of th div s sid f il ust b loctd pio to instlling th div s sid bckt (s igu 2). Rov th flng nut fo th outsid of th f nd kp fo lt us (s igu 2b). Rott th tubs up nd out of th wy. Instll th L-bckt with 1/4 hdw, s shown in igu 2c. Tightn th L-bckt to th f, but lv th tub hold loos to id bckt instlltion. Th tub hold will b tightnd onto th L-bckt in Stp 18. Div ssid sid Div s sid f il f il flng nut 12 Tub hold Vpo tub flng nut L-bckt igu 2 igu 2b igu 2c Insid of f il 3. o undnth th vhicl, instll th wd hitch coss b by plcing on nd bov th vhicl f nd nuving th notchd sction of th opposit nd bov th vhicl f. Th fowd coss b hs two dditionl hols (s igu 3). Tpoily position th wd hitch coss b ginst th ht chnnl of th vhicl. 4. o undnth th vhicl instll th fowd hitch coss b by plcing th div s sid notchd nd bov th vhicl f nd nuving th opposit notchd nd bov th xhust nd bov th vhicl f. ont Ht Chnnl ont Ht Chnnl Additionl Hols R Ht Chnnl R Coss Mb Instlltion igu 3 R Ht Chnnl owd Coss Mb Instlltion

6 Instlltion Instuctions od -250/-350 Sup Duty Pt Nubs: Will not fit Cb-on-Chssis vhicls 5. Loosly instll th div s sid nd pssng s sid hitch sid bckts by ttching th 5/8 hdw to th thdd studs. Instll th 5/8 X 2.50 cig bolts though th hitch sid bckts, 5/8 blocks nd th lg slots in th vhicl f ils. Loosly, instll th 5/8 Conicl Toothd Wshs nd 5/8 hx nuts to th cig bolts (s igu 1). 6. Us th supplid U-Bolt fo th fowd ttchnt of th bckt to th f (s igu 4). Position U-Bolt fo th insid of th vhicl f pointing towds th hitch sid bckt. On th pssng s sid of th vhicl, th U-Bolt ust b positiond to th vhicl fowd sid of th shock ount nd instlld on n ngl though th ounting slots on th hitch sid bckt. U-Bolt Vhicl owd igu 4 7. Toqu th 5/8 - GR5 fstns conncting th fowd coss b to th bckts to 0 ft.-lb. (203 N-). Toqu th 1/2-13 U-Bolt fstns to 75 ft.-lb (2 N-). Toqu th 5/8 nuts to th 5/8 X 2.50 cig bolts to 0 ft.-lb. (203 N-). Th wd coss b should b lft loos until stp o 6300 & 8339 us th out dgs of th long slots in th fowd coss b s tplt to dill 5/8 dit hols though th tuck bd s shown in igu 5. Not ll hols cn b dilld fo und th vhicl, but will b don lt fo insid th bd. 8b. o & us th inn dgs of th long slots in th fowd coss b s tplt to dill 5/8 dit hols though th tuck bd s shown in igu 5b. Not ll hols cn b dilld fo und th vhicl, but will b don lt fo insid th bd. 9. Align th hols on th tplt (povidd with th goosnck hitch) with th hols pviously dilld though th bd. B su tht th tplt is poply ointd towd th font of th vhicl. Cnt punch th hols tht will b usd to cut th opning in th bd. If th vhicl is quippd with bd lin, sction of th bd lin ust b cut wy so tht th goosnck hitch cn contct th bd cougtions.. Dill 1/4 pilot hols (siz will dpnd on width of bld in sb sw). Cut out th tuck bd, fil th dgs s ndd.. Instll th hitch into th opning. Tplt p/n 5978 fo us with 6300 hd Tplt p/n 1234 fo us with 8339 hd Tplt p/n 1523 fo us with 83399/83391 hds Dubl nd usbl stinlss stl tplts lso vilbl. A ti sv fo cutting bd lin nd bd. Tplt p/n 6467 fo us with 6300 hd Tplt p/n 6425 fo us with 8339 hd Tplt p/n fo us with 83399/83391 hds WARNING Th ful tnk nd/o oth vhicl coponnts loctd blow so of th hols. A wood o tl shild ust b plcd btwn th f nd th ful tnk to pvnt punctuing th ful tnk whn th dill bks though th bd. 12. Us th hitch s guid to dill th 5/8 dit hols fo th wd coss b. Also, dill 5/8 dit U-Bolt hols if instlling 6300 o 8339 goosnck hitch. 13. Bfo instlling th 5/8 cig bolts though th hitch, th U-Block shis (Pt Nub 5994) ust b plcd btwn th hitch nd th bd nd btwn th coss bs nd th botto of th bd. Ths shis ncssy to pvnt th bd cougtions fo collpsing whn th bolts tightnd.. Align th wd coss b with th 5/8 dit dilld hols. 6300/8339 Hol Loctions 83399/83391 Hol Loctions Us out dgs to dill 5/8 hols owd coss b Us inn dgs to dill 5/8 hols owd coss b igu 5 Rwd coss b igu 5b Rwd coss b

7 Instlltion Instuctions od -250/-350 Sup Duty Will not fit Cb-on-Chssis vhicls Pt Nubs: 19 5/8 X 2.50 GR5 Cig Bolt Lockwsh Hx Nut 4 Plcs. Instll th 5/8 X 2.50 GR5 cig bolts though h th hitch, h shis nd coss bs. Scu with lock wshs nd nuts. Toqu nuts to 0 Lb.-t. 16. o 6300 nd 8339 Instlltions: Instll th (2) U-Bolts though th hitch. o und th vhicl instll lg flt wsh ov th U-Bolt followd by sping, noth lg flt wsh nd scu with thin 5/8 j nut. Rpt fo oth lgs of th U-Bolts. Th 5/8 j nuts tightnd until 3 thds visibl pst th botto of th j nut. 17. Toqu th 5/8- GR5 fstns conncting th wd coss b to th bckts to 0 ft.-lb. (203 N-). 18. On gs vhicls only: Us th fctoy flng nut tht ws ovd in stp 2 to tightn th tub hold onto th L-bckt nd shown in figu 2c. 19. Rinstll xhust s shown blow. Exhust instlltion: 20. If th is lss thn ½ clnc btwn th xhust pip nd th coss bs, th xhust bckt supplid with th ounting kit ust b usd (S figu 6 nd 6b). o th ttchnt (igu 6), fstn th supplid bckt xtnsion to th fctoy bckt with th fctoy M8 bolts, thn fstn th xtnsion to th f with th supplid hdw. Rttch th xhust bckt fowd of th xl to th f coss b with 3/8 spcs sndwichd btwn th bckt nd coss b. Exhust bckt 13 coss b 16 ctoy nuts Mounting bckt igu 6 R Attchnt ctoy bolts igu 6b Cnt Attchnt CEQUENT TRAILER HITCHES HITCH MOUNTS

Alternate Mount and Location for a Trolling Motor. Print in Landscape Mode with ¼ inch borders.

Alternate Mount and Location for a Trolling Motor. Print in Landscape Mode with ¼ inch borders. SIDE MOTOR MOUNT Altrnat Mount and Location for a Trolling Motor Drawn 09-15-2013 Rv. 07-11-2016 Print in Landscap Mod with ¼ inch bordrs. Th primary purpos of locating th trolling motor nxt to th oprator