VALVES. Nugget 200 Spool Valves 1/4", 3/8", 1/2" NPT Air Pilot Actuated 3/2, 5/2, & 5/3 Inline Valves
|
|
|
- Laureen Potter
- 6 years ago
- Views:
Transcription
1 Nugget 00 Spool Valves 1/", 3/8", 1/" NPT Air Pilot Actuated 3/, 5/, & 5/3 Inline Valves Long lasting spool design High flow compact valves Three functional types: available in 3/, 5/, and 5/3 configurations Low pressure operators Technical data Medium: Filtered and lubricated or nonlubricated compressed air or vacuum. Operation: Spool valve air pilot actuated. Mounting: Inline through holes in valve body. Port Size: NPT 1/", 3/8", 1/" ISO G 1/", 3/8". Operating Pressure: 10 Hg vacuum to 150 psig (10.3 bar). For details see overleaf. Operating Temperature: -0 to 160 F (-9 to 71 C) Consult Technical Service for use below 35 F ( C). Materials: Body: Aluminum Spool: Anodized aluminum Elastomers: Nitrile and special nitrile based low-friction elastomers. Minimum Pilot Pressures Operator Return Nondetent psig (bar) Detented psig (bar) Spring Centered psig (bar) Large Air Large Air 15 (1.0) 5 (1.7) 5 (3.1) Large Air Small Air 35 (.) Small Air Small Air 5 (1.7) Large Air Spring 35 (.) Low Pressure Spring (.7) Air Small Air Spring 65 (.5) Air Bleed Air Bleed 15 (1.0) 5 (1.7) Air Bleed Spring 35 (.) Pressure applied simultaneously to both operators. The piston area of the KA operator is approximately twice that of the KA1 operator. Pressure applied to port B of KA6 operator (port A open). A minimum vacuum of 6.1 inches Hg (KS1 return) applied to A (port B open) will also operate the valve. The KA6 operator can also be used as a differential pressure operator with or without return spring. The differential pressure required to shift the valve without return spring is less than 1 psig (" Hg). To reduce the possibility of internal contamination, it is suggested that a filter/breather be installed in the port. Average Flow Factors in Cv (l/min) Valve Port Size Flow Path Port 1 to 1 to Port to 3 to 5 3-Port, Inline 1/" 1.6 (1600) 1.7 (1700) 3/8" 1.6 (1600) 1.7 (1700) 5-Port, Inline 1/" 1.6 (1600) 1.7 (1700) 3/8" 1.6 (1600) 1.7 (1700) 1/" 1.6 (1600) 1.7 (1700) Flow Rating determined in accordance with NFPA/T3.1.3, Pneumatic fluid power Flow test procedure and reporting method For fixed orifice components. VAL-186
2 Nugget 00 Spool Valves 1/", 3/8", 1/" NPT Air Pilot Actuated 3/, 5/, & 5/3 Inline Valves 3/ Air Pilot/Spring return Normaly Open K1DA00KA1KS6 1/" NPT Small Air 1/8" NPT 10" Hg K1DA00KAKS6 1/" NPT Large Air 1/8" NPT 10" Hg K1DA00KA6KS6 1/" NPT Low Pressure Operator 1/8" NPT 10" Hg K1DA00KA8KS6 1/" NPT Air Bleed 1/8" NPT 10" Hg K1EA00KA1KS6 3/8" NPT Small Air 1/8" NPT 10" Hg K1EA00KAKS6 3/8" NPT Large Air 1/8" NPT 10" Hg K1EA00KA6KS6 3/8" NPT Low Pressure Operator 1/8" NPT 10" Hg K1EA00KA8KS6 3/8" NPT Air Bleed 1/8" NPT 10" Hg / Air Pilot/Spring return Normaly Closed K1DA00KS6KA1 1/" NPT Small Air 1/8" NPT 10" Hg K1DA00KS6KA 1/" NPT Large Air 1/8" NPT 10" Hg K1DA00KS6KA6 1/" NPT Low Pressure Operator 1/8" NPT 10" Hg K1DA00KS6KS8 1/" NPT Air Bleed 1/8" NPT 10" Hg K1EA00KS6KA1 3/8" NPT Small Air 1/8" NPT 10" Hg K1EA00KS6KA 3/8" NPT Large Air 1/8" NPT 10" Hg K1EA00KS6KA6 3/8" NPT Low Pressure Operator 1/8" NPT 10" Hg K1EA00KS6KS8 3/8" NPT Air Bleed 1/8" NPT 10" Hg / Air Pilot/Air Pilot K1DA00KA1KA1 1/" NPT Small Air 1/8" NPT 10" Hg K1DA00KAKA 1/" NPT Large Air 1/8" NPT 10" Hg K1DA00KAAKAA 1/" NPT Yes Large Air 1/8" NPT 10" Hg K1DA00KA1KA 1/" NPT Air Bias 1/8" NPT 10" Hg K1DA00KA6KA6 1/" NPT Low Pressure Operator 1/8" NPT 10" Hg K1DA00KA8KA8 1/" NPT Air Bleed 1/8" NPT 10" Hg K1EA00KA1KA1 3/8" NPT Small Air 1/8" NPT 10" Hg K1EA00KAKA 3/8" NPT Large Air 1/8" NPT 10" Hg K1EA00KAAKAA 3/8" NPT Yes Large Air 1/8" NPT 10" Hg K1EA00KA1KA 3/8" NPT Air Bias 1/8" NPT 10" Hg K1EA00KA6KA6 3/8" NPT Low Pressure Operator 1/8" NPT 10" Hg K1EA00KA8KA8 3/8" NPT Air Bleed 1/8" NPT 10" Hg / Air Pilot /Spring Return K71DA00KS6KA1 1/" NPT Small Air 1/8" NPT 10" Hg K71DA00KS6KA 1/" NPT Large Air 1/8" NPT 10" Hg K71DA00KS6KA6 1/" NPT Low Pressure Operator 1/8" NPT 10" Hg K71DA00KS6KA8 1/" NPT Air Bleed 1/8" NPT 10" Hg K71EA00KS6KA1 3/8" NPT Small Air 1/8" NPT 10" Hg K71EA00KS6KA 3/8" NPT Large Air 1/8" NPT 10" Hg K71EA00KS6KA6 3/8" NPT Low Pressure Operator 1/8" NPT 10" Hg K71EA00KS6KA8 3/8" NPT Air Bleed 1/8" NPT 10" Hg K71FA00KS6KA1 1/" NPT Small Air 1/8" NPT 10" Hg K71FA00KS6KA 1/" NPT Large Air 1/8" NPT 10" Hg K71FA00KS6KA6 1/" NPT Low Pressure Operator 1/8" NPT 10" Hg K71FA00KS6KA8 1/" NPT Air Bleed 1/8" NPT 10" Hg VAL-187
3 Nugget 00 Spool Valves 1/", 3/8", 1/" NPT Air Pilot Actuated 3/, 5/, & 5/3 Inline Valves 5/ Double Air Pilot K71DA00KA1KA1 1/" NPT Small Air 1/8" NPT 10" Hg K71DA00KAKA 1/" NPT Large Air 1/8" NPT 10" Hg K71DA00KAAKAA 1/" NPT Yes Large Air 1/8" NPT 10" Hg K71DA00KA1KA 1/" NPT Air Bias 1/8" NPT 10" Hg K71DA00KA6KA6 1/" NPT Low Pressure Operator 1/8" NPT 10" Hg K71DA00KA8KA8 1/" NPT Air Bleed 1/8" NPT 10" Hg /3 All Ports Blocked K71EA00KA1KA1 3/8" NPT Small Air 1/8" NPT 10" Hg K71EA00KAKA 3/8" NPT Large Air 1/8" NPT 10" Hg K71EA00KAAKAA 3/8" NPT Yes Large Air 1/8" NPT 10" Hg K71EA00KA1KA 3/8" NPT Air Bias 1/8" NPT 10" Hg K71EA00KA6KA6 3/8" NPT Low Pressure Operator 1/8" NPT 10" Hg K71EA00KA8KA8 3/8" NPT Air Bleed 1/8" NPT 10" Hg K71FA00KA1KA1 1/" NPT Small Air 1/8" NPT 10" Hg K71FA00KAKA 1/" NPT Large Air 1/8" NPT 10" Hg K71FA00KAAKAA 1/" NPT Yes Large Air 1/8" NPT 10" Hg K71FA00KA1KA 1/" NPT Air Bias 1/8" NPT 10" Hg K71FA00KA6KA6 1/" NPT Low Pressure Operator 1/8" NPT 10" Hg K71FA00KA8KA8 1/" NPT Air Bleed 1/8" NPT 10" Hg K81DA00KACKAC 1/" NPT Large Air 1/8" NPT 10" Hg K81EA00KACKAC 3/8" NPT Large Air 1/8" NPT 10" Hg K81FA00KACKAC 1/" NPT Large Air 1/8" NPT 10" Hg /3 Center Open to Exhaust K81DA06KACKAC 1/" NPT Large Air 1/8" NPT 10" Hg K81EA06KACKAC 3/8" NPT Large Air 1/8" NPT 10" Hg K81FA06KACKAC 1/" NPT Large Air 1/8" NPT 10" Hg /3 Center Open to Pressure K81DA05KACKAC 1/" NPT Large Air 1/8" NPT 10" Hg K81EA05KACKAC 3/8" NPT Large Air 1/8" NPT 10" Hg K81FA05KACKAC 1/" NPT Large Air 1/8" NPT 10" Hg VAL-188
4 Nugget 00 Spool Valves 1/", 3/8", 1/" ISO G Air Pilot Actuated 3/, 5/, & 5/3 Inline Valves 3/ Air Pilot/Spring return Normaly Open K1DG00KAKS6 1/" ISO G Small Air 1/8" ISO G 10" Hg K1DG00KA5KS6 1/" ISO G Large Air 1/8" ISO G 10" Hg K1EG00KAKS6 3/8" ISO G Small Air 1/8" ISO G 10" Hg K1EG00KA5KS6 3/8" ISO G Large Air 1/8" ISO G 10" Hg / Air Pilot/Spring return Normaly Closed K1DG00KS6KA 1/" ISO G Small Air 1/8" ISO G 10" Hg K1DG00KS6KA5 1/" ISO G Large Air 1/8" ISO G 10" Hg K1EG00KS6KA 3/8" ISO G Small Air 1/8" ISO G 10" Hg K1EG00KS6KA5 3/8" ISO G Large Air 1/8" ISO G 10" Hg / Air Pilot/Air Pilot K1DG00KAKA 1/" ISO G Small Air 1/8" ISO G 10" Hg K1DG00KA5KA5 1/" ISO G Large Air 1/8" ISO G 10" Hg K1DG00KABKAB 1/" ISO G Yes Large Air 1/8" ISO G 10" Hg K1DG00KAKA5 1/" ISO G Air Bias 1/8" ISO G 10" Hg K1EG00KAKA 3/8" ISO G Small Air 1/8" ISO G 10" Hg K1EG00KA5KA5 3/8" ISO G Large Air 1/8" ISO G 10" Hg K1EG00KABKAB 3/8" ISO G Yes Large Air 1/8" ISO G 10" Hg K1EG00KAKA5 3/8" ISO G Air Bias 1/8" ISO G 10" Hg / Air Pilot /Spring Return K71DG00KS6KA 1/" ISO G Small Air 1/8" ISO G 10" Hg K71DG00KS6KA5 1/" ISO G Large Air 1/8" ISO G 10" Hg K71EG00KS6KA 3/8" ISO G Small Air 1/8" ISO G 10" Hg K71EG00KS6KA5 3/8" ISO G Large Air 1/8" ISO G 10" Hg K71FG00KS6KA 1/" ISO G Small Air 1/8" ISO G 10" Hg K71FG00KS6KA5 1/" ISO G Large Air 1/8" ISO G 10" Hg / Double Air Pilot K71DG00KAKA 1/" ISO G Small Air 1/8" ISO G 10" Hg K71DG00KA5KA5 1/" ISO G Large Air 1/8" ISO G 10" Hg K71DG00KABKAB 1/" ISO G Yes Large Air 1/8" ISO G 10" Hg K71DG00KAKA5 1/" ISO G Air Bias 1/8" ISO G 10" Hg K71EG00KAKA 3/8" ISO G Small Air 1/8" ISO G 10" Hg K71EG00KA5KA5 3/8" ISO G Large Air 1/8" ISO G 10" Hg K71EG00KABKAB 3/8" ISO G Yes Large Air 1/8" ISO G 10" Hg K71EG00KAKA5 3/8" ISO G Air Bias 1/8" ISO G 10" Hg K71FG00KAKA 1/" ISO G Small Air 1/8" ISO G 10" Hg K71FG00KA5KA5 1/" ISO G Large Air 1/8" ISO G 10" Hg K71FG00KABKAB 1/" ISO G Yes Large Air 1/8" ISO G 10" Hg K71FG00KAKA5 1/" ISO G Air Bias 1/8" ISO G 10" Hg /3 All Ports Blocked K81DG00KADKAD 1/" ISO G Large Air 1/8" ISO G 10" Hg K81EG00KADKAD 3/8" ISO G Large Air 1/8" ISO G 10" Hg K81FG00KADKAD 1/" ISO G Large Air 1/8" ISO G 10" Hg VAL-189
5 Nugget 00 Spool Valves 1/", 3/8", 1/" ISO G Air Pilot Actuated 3/, 5/, & 5/3 Inline Valves 5/3 Center Open to Exhaust K81DG06KADKAD 1/" ISO G Large Air 1/8" ISO G 10" Hg K81EG06KADKAD 3/8" ISO G Large Air 1/8" ISO G 10" Hg K81FG06KADKAD 1/" ISO G Large Air 1/8" ISO G 10" Hg /3 Center Open to Pressure K81DG05KADKAD 1/" ISO G Large Air 1/8" ISO G 10" Hg K81EG05KADKAD 3/8" ISO G Large Air 1/8" ISO G 10" Hg K81FG05KADKAD 1/" ISO G Large Air 1/8" ISO G 10" Hg Replacement Parts Model Pilot Port size Description Positions KA1 1/8" NPT Small Air -position KA 1/8" NPT Large Air -position KA6 1/8" NPT Low Pressure Air -position KA8 1/8" NPT Air Bleed -position KAA 1/8" NPT Large Air Detented -position KAC 1/8" NPT Large Air 3-postion KA 1/8" ISO G Small Air -position KA5 1/8" ISO G Large Air -position KAB 1/8" ISO G Large Air Detented -position KAD 1/8" ISO G Large Air 3-postioon KS6 Spring Return -position KAA/KAF KA, KA5 KA8, KA9 LARGE AIR 1.51 (38.) 1.16 (9.5) 1/8-7 PTF o G 1/8 ISO.59 (15.0) Air Bleed Operators Constantly bleeds a small amount of air to atmosphere. The valve spool shifts when air bleed is stopped by a customer-supplied on-off valve. 1/8-7 PTF or G 1/8 ISO KA1, KA SMALL AIR (AIR BIAS).5 (13.) KA1 Air Bias Operator When pressure is applied to the KA1 operator the valve spool shifts to the KA end. When pressure is applied to both the KA1 and KA operators the valve spool shifts to the KA1 end. 1/8-7 PTF or G 1/8 ISO ( Places) KA6, KA7 LOW PRESSURE 1.5 (31.8).53 (115.0).85 (1.6) KA6 Low Pressure Operator (inline valves only) Operator shifts the valve spool with only psig (.8 bar) applied to Port B (Port A open). A minimum vacuum of 6.1" Hg (with KS1 spring return) applied to port A (Port B open) will also operate the valve. Can also be used as a differential pressure operator with or without spring return. Dimensions in inches (mm) VAL-190
6 Nugget 00 Spool Valves 1/", 3/8", 1/" Air Pilot Actuated 3/, 5/, & 5/3 Inline Valves Replacement Parts NTP ISO G Thread Function Port Size Replacement Spool K1DA00 K1DG00 3-ported / position 1/" K1ED00 K1ED00 3-ported / position 3/8" K71DA00 K71DG00 5-ported / position 1/" K71EA00 K71EG00 5-ported / position 3/8" K71FA00 K71FG00 5-ported / position 1/" K81DA00 K81DG00 5-ported / 3 position APB 1/" K81EA00 K81EG00 5-ported / 3 position APB 3/8" K81FA00 K81FG00 5-ported / 3 position APB 1/" K81DA06 K81DG06 5-ported / 3 position COE 1/" K81EA06 K81EG06 5-ported / 3 position COE 3/8" K81FA06 K81FG06 5-ported / 3 position COE 1/" K81DA05 K81DG05 5-ported / 3 position COP 1/" K81EA05 K81EG05 5-ported / 3 position COP 3/8" K81FA05 K81FG05 5-ported / 3 position COP 1/" Inline Bodies 3-WAY 1/" & 3/8" PORTS K1 -WAY 1/", 3/8", 1/" PORTS K71 or K81.56 (1.).8 (63.0).56 (1.) 1.09 (7.7) 3.5 (89.9) 1.09 (7.7) 1.08 (7.).16 (5.8).8 (1.3) MOUNTING HOLES.6 (6.6) DIA. ( Places).16 (5.8) 1.08 (7.).8 (1.3) (17.5) 1. (31.5).69 (17.5) (7.9) (7.9).6 (6.6) DIA. ( Places) 1.6 (3.0) 1/ or 3/8 PTF G 1/ or G 3/8 ISO (3 Places) 1.77 (5.0).55 (1.0).55 (1.0) 1/, 3/8 or 1/ PTF G 1/ or G 3/8 ISO (5 Places) 1.6 (3.0) Dimensions in inches (mm) VAL-191
VAL-212. Super X Manually & mechanically actuated spool valve In-line 3/2, 5/2 & 5/3, 1/8" & 1/4" NPT VALVES. 1/8" NPT 3/2 Mechanical Valves
3/, 5/ & 5/3, /8" & /4" NPT PRODUCTS FOR SAFE SYSTEMS* Wide range of operators Suitable for multi-directional flow and dual supply applications High flow capacity Lightweight corrosion resistant materials
Mechanically actuated valves
Mechanically actuated valves /2-5/2 spool valves with /8 NPT threaded ports Installation in any position Comprehensive range of actuations, direct or servo-piloted Special versions on request Materials
INTEGRAL-BONNET NEEDLE VALVES H-300 SERIES
INTEGRAL-BONNET NEEDLE VALVES SERIES INTEGRAL-BONNET NEEDLE VALVES SERIES FEATURES n Straight and angle pattern n Stainless Steel and Brass construction n MAWP 5000 psi (345 bar) n MAWT 446 F (230 C) n
AIR PREPARATION UNITS 3/4" NPT & 1" NPT SERIES
PNEUMATIC GROUP AIR PREPARATION UNITS 3/" NPT & " NPT SERIES 6 0, 0,6 0, 0,8 8 0,0 0 0 bar 6 0, 0,6 0, 0,8 8 0,0 0 0 bar 83 6 0, 0,6 0, 0,8 8 0,0 0 0 bar 6 0, 0,6 0, 0,8 0,0 0 0 bar 8 Port size Recommended
Compressor Accessories
Compressor Accessories Series 11 Superior quality for superior performance COMPRESSOR OIL Description MINERAL 11.1100 1 litre container 11.1400 4 litre container SYNTHETIC 11.1200 1 litre container 11.1500
Control Panel Regulators
Control Panel Regulators Modular design for service & interchangeability Non-rising adjustment knob with push-pull lock ring feature Small package size and light weight construction Competitively priced
Needle Valves Catalog 4110-NV December 2010
Needle Valves Catalog 4110-NV December 2010 Series Needle Valves Catalog 4110-NV Introduction Parker Series nion onnet Valves have been engineered for use at pressures up to 6,000 (414 bar) and temperatures
Inline Filters (F Series) Catalog 4130-F July 2005
Inline Filters (F Series) Catalog 4130-F July 2005 Catalog 4130-F Introduction Parker are designed for protection of instrumentation systems from undesirable materials. Component changes or repair and
service Quality Delivery NorgrenExpress.com EXPrEss PLUS M/50 switches Mounts c/ Ø 25 to 63 mm ACT-31
M/50 switches switch P/N cable Material type M/50/lsU/*v pvc reed led M/50/eaN/*v pvc solid state sinking (NpN) led M/50/eap/*v pvc solid state sourcing (pnp) led Mounts bore Foot Mounts center support
DURASEAL. High Integrity, Double Block and Bleed Plug Valve.
DURASEAL High Integrity, Double Block and Bleed Plug Valve www.franklinvalve.com How the DuraSeal Works An improved valve with a proven history We took an alternative path. Unlike many valve manufacturers
Check Valves PRODUCT DESCRIPTION FEATURES & BENEFITS TECHNICAL SPECIFICATIONS
Check Valves PRODUCT DESCRIPTION CPI check valves are designed for high pressure applications where reverse flow and leakage must be kept to a minimum. Typical applications include engine, pump and compressor
Air Preparation Equipment
FRLS Improve system efficiency Side-by-side and stacking units available Modular design for easy connection and maintenance Variety of port sizes from #10-30 to 1" NPT pp. 170-174 FILTERS Capture solid
TECHNICAL SPECIFICATIONS. Carbon Steel / Stainless Steel One piece design BALL. Stainless Steel MAXIMUM OPERATING TEMPERATURE CRACKING PRESSURE
Check Valves PRODUCT DESCRIPTION CPI check valves are designed for high pressure applications where reverse flow and leakage must be kept to a minimum. Typical applications include engine, pump and compressor
MFD Filters (MGF Series) 8.3. MFD Mini Regulators (MSR Series) 8.4. MFD General Purpose Regulators (MGR Series) 8.5
ir Preparation Equipment MFD Filters (MGF Series) 8.3 MFD Mini Regulators (MSR Series) 8.4 MFD General Purpose Regulators (MGR Series) 8.5 MFD General Purpose Lubricators (MGL Series) 8.6 MFD Filter -
FasMate Quick Connectors Industry Applications:
FasMate Quick Connectors Industry Applications: The FasMate Series instantly seals threaded ports from vacuum up to 344.7 bar. The patented proprietary design makes sealing threaded ports as easy as 1,
Table of Contents. Mark 3, SPA 3 & PA 3 Series
Table of Contents...3-9 NSI Symbols... 3 Technical and Operating Data.... How to Order....5-6 Valve with ase....7-8 Manifold lock ssembly...9-0 Sandwich ressure Regulator.... Regulator Service Kits....
HE Manual On/Off Valves D Series, NPT Technical Data
HE Manual On/Off Valves D Series, NPT Technical Data Function Flow rate 000 6500 l/min Temperature range 0 +60 C Operating pressure 0 6bar 3/2-way manual shut-off valve The unit is vented when switched
In-Line Accessories. In-Line Pressure Gauges. Pressure Gauges. In-Line Accessories
Pressure Gauges Pressure gauges for monitoring system pressure Hoses and test points for sampling oil and determining ISO cleanliness levels Flanges to connect components Valves for system control In-Line
Compressed Air Cleaning Filter Series
Compressed Air Cleaning Filter For Water, Solid/Oil Separation and Deodorization Modular connection, Space-saving design, Labor-saving in piping! AMG C, AFF C, AM C, AMD C AMH C, AME C, AMF C Uses the
Advanced in vitro exposure systems VITROCELL VC 10 S-TYPE SMOKING ROBOT
Advanced in vitro exposure systems VITROCELL VC 10 S-TYPE SMOKING ROBOT Platform concept conventional cigarettes e-cigarettes fast cleaning VITROCELL SMOKING ROBOT VC 10 S-TYPE Features all special requirements
Misc: Interchange Coupling
Wing Style Interchange Coupling Misc: Interchange Coupling Series: W Interchange: Parker 6100 - Seals: Nitrile - Threaded sleeve allows connection/disconnection under pressure - Coupler: brass material
Union Bonnet Valves - VU6 Series
BlowOur Proof Back Seating Hardened Stem Thread Mountable Panel nut Metal Seal Bonnet Union Bonnet Valves VU6 Series Features Pressure rating up to 6000psig (13bar) @38 C (100 F) Temperature rating from
AIR PREPARATION uality DOES matter!
Qu ali ty DO E AIR PREPARATION S m at! r te AIR FILTER-REGULATOR-LUBRICATOR COMBINATION NAC 2000 01 D Model Range Body Size Port Size Manual Drain 2000 01: 1/8 NPT D Auto Drain 3000 02: 1/4 NPT 4000 03:
SUMMARY UNITS INTRODUCTION PAGE 2-4 KEY TO CODES PAGE 2-7 FILTER PAGE 2-8 DEPURATOR PAGE 2-11 ACTIVE CARBON FILTER PAGE 2-14.
SUMMARY INTRODUCTION PAGE - KEY TO CODES PAGE -7 FILTER PAGE -8 DEPURATOR PAGE - SUMMARY Syntesi ACTIVE CARBON FILTER PAGE - REGULATOR PAGE -7 IN-SERIES REGULATOR PAGE - FILTER-REGULATOR PAGE - LUBRICATOR
12 series (Pneufit) Push-in fittings Ø 1/8... 1/2, Ø mm tube size, BSP and NPT threads
2 series (Pneufit) Push-in fittings Ø /8... /2, Ø 4... 2 mm tube size, SP and NPT threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage ll taper
TEKNOCRAFT INC. Proportional Valves. Mini Valves. Outlet Balanced Valves. Standard Valves. Your Proportional Valve Specialists
TEKNOCRAFT INC. Your Proportional Valve Specialists Proportional Valves Mini Valves Outlet Balanced Valves Standard Valves Table of Contents Teknocraft Unique Designs... 3 Mini Valves... 6 Outlet Balanced
3/4" NPT 3080 MF 185-3/4-US 1" NPT 3080 MF US
Port size Recommended flow Page No. (l/min) 1/8" NPT 125 MF 007-1/8-US 111-112 1/4" NPT 125 MF 007-1/4-US 1/8" NPT 200 MF 012-1/8-US 113-114 1/4" NPT 200 MF 012-1/4-US 3/8" NPT 200 MF 012-3/8-US 3/8" NPT
12 series (Pneufit) Push-in fittings
> > Port size: Ø /8... /2, Ø 4... 2 mm tube size, SP and NPT threads > > Very compact units > > asy tube insertion for rapid assembly of pneumatic circuits > > Positive tube anchorage > > ll taper threads
FITTINGS. Pneufit C composite and Pneufit M fittings Inch Ø 1/8" to 1/2" O/D tube
Pneufit C composite and Pneufit M fittings Ø 1/8" to 1/2" Ready to use. Over 1,000 composite push-in pneumatic fittings. Releasable stainless-steel grab-ring to grip nylon or polyurethane (8 or 9 durometer).
Impact resistant PBT body in black for Pneufit C and light gray for Pneufit M.
Pneufit C composite and Pneufit M fittings Ø Â" to Ë" Ready to use. Over 1,000 composite push-in pneumatic fittings. Releasable stainless-steel grab-ring to grip nylon or polyurethane (85 or 95 durometer).
Description The 4000 Series offers up to 8600 in-lb of torque and 25 gpm (continuous ratings). This is the corner stone of the Char-Lynn line.
Highlights Features ety of mounting flanges and output shafts options Benefits motor into a system tough applications Applications Description The 0 Series offers up to 0 in-lb of torque and gpm (continuous
EZ Inline Series. Air Control Valves. Section D
Z Inline Series Air ontrol Valves Section www.parker.com/pneu/zinline AX Viking Z asic Valve unctions...2- asic Valve eatures...4-5 Solenoid Operated Valves ommon Part umbers...6 odel umber Index...7 Remote
FILTREC SUCTION FILTERS SECTION 19B. FilTers. FA-1 suction spin-on Fs-1 suction strainers Fs-7 in tank mounted suction strainers...
FILTREC SUCTION FILTERS SECTION 19B suction FilTers FA-1 suction spin-on...688 Fs-1 suction strainers...694 Fs-7 in tank mounted suction strainers...699 50% off all prices 636-770 Harrier Catalogue 14
Valve terminals VTOC
Overview Valve terminals Design Type code Description Valve terminal VTOC with multi-pin plug connection, Sub-D SD Sub-D, 25-pin Sub-D, 44-pin Page/ Internet 25 Valve terminal VTOC with multi-pin plug
ROTARY UNION 9000 SERIES GENERAL PURPOSE MODELS ADDED MODELS ADDED. Operating Parameters FEATURES & BENEFITS MEDIA PRESSURE* TEMPERATURE* SPEED*
ROTARY UNION 9 SERIES GENERAL PURPOSE Operating Parameters Steam, Hot Oil, Water MEDIA PRESSURE* 25 psi (Water), 75 psi (Steam), psi (Hot Oil) MODELS ADDED MODELS ADDED TEMPERATURE* 6 F (Hot Oil), 378
Quick Sealing with a Twist to Connect Actuation Method
- Finger tighten seals up to 689 bar (10,000 psi) for pneumatic and hydraulic testing - Safe and Reliable leak tight connections to male and female threads - Eliminate thread damage, sealant and wrenches
Advanced in vitro exposure systems VITROCELL VC 1 SMOKING MACHINE
Advanced in vitro exposure systems VITROCELL VC 1 SMOKING MACHINE Options for e-cigarettes VITROCELL VC 1 SMOKING MACHINE Manual smoking machine with high tech features square puff profiles higher puff
Flow - diaphragm / limiter
GHM Messtechnik GmbH Hans-Sachs-Str. 26 93128 Regenstauf Germany Fon +49 () 942-9383 - Fax - 33 www.ghm-messtechnik.de info@ghm-messtechnik.de Flow - diaphragm / limiter System Flow Diaphragm limiter Nominal
Advanced in vitro exposure systems
Advanced in vitro exposure systems VITROCELL VC 1/7 SMOKING MACHINE Features for e-cigarettes VITROCELL VC 1/7 SMOKING MACHINE Linear smoking machine with high tech features square puff profiles higher
Ball Valves. BV & BT Series. Features. Pressure vs. Temperature. Technical Data. Pressure Ratings
Ball Valves & Series Features Any end type and size combination available upon request Adjustable stem seal can be maintained in-line Panel mountable Bi-directional flow All valves are 00% factory tested
Fundamentals of Pressure Transducers
print close Fundamentals of Pressure Transducers (Unpublished) Hydraulics & Pneumatics Alan Hitchcox Tue, 2013 09 17 (All day) Pressure is a key factor in almost every fluid power circuit. Pressure transducers
COST, PROCESS & QUALITY IMPROVEMENT
COST, PROCESS & QUALITY IMPROVEMENT - Finger tighten seals up to 10,000 psi (689 bar) for pneumatic and hydraulic testing - Safe and Reliable leak tight connections to male and female threads - Eliminate
Needle Valves. We deliver confidence through quality products
We deliver confidence through quality products INTRODUCTION NEEDLE VALVES SD range of Needle valves come in various sizes, sealing styles, end connections and stem types. They are available in bar stock
Today s Improved Compressed Air Piping Method
STEP 1 STEP 2 STEP 3 (see page 8 for detailed instructions) Today s Improved Compressed Air Piping Method FAST INSTALLATION TIME -Aluminum piping is easy to cut and lift -O-ring seals ensure a leak free
LF Filters D Series, NPT Technical Data
LF Filters D Series, NPT Technical Data Function Condensate drain turned manually Flow rate 70 5300 l/min Temperature range 0 +60 C semi- or fully automatic Pressure 0 6bar Good particle and condensate
Vacuum pumps. Vacuum pumps
For over 50 years, PIAB has been developing a range of vacuum solutions that cover the widely varying needs of the market. We constantly strive to improve our products and adapt them to market needs by
XRAY Series Includes
XRAY Series 2 Finger 1250N, 2200N, 2500N, 4400N XRAY Series Includes XRAY 1250 XRAY 1250 LBR XRAY S 2200 Tandem XRAY 1250 Tandem XRAY S 2200 XRAY Applications: An XRAY S is used to handle a transmission
P SERIES. 250 psi NFPA Pneumatic Cylinder TECHNICAL BROCHURE. Bore Sizes from 11/2 to 14
Actuation Solutions and Systems for the P SERIES 250 psi NFPA Pneumatic Cylinder Bore Sizes from 11/2 to 14 Actuation Solutions and Systems for the Design & Materials Temperature Ratings Low Temp. -54
Premium Chemical Free Iron/Sulphur Filter Installation Manual
Premium Chemical Free Iron/Sulphur Filter Installation Manual 220 Bayview Avenue Unit 18 Barrie, Ontario, Canada, L4N 4Y8 www.excaliburwater.com EXCALIBUR PREMIUM CHEMICAL FREE IRON/SULPHUR FILTER INSTALLATION
Liquid level transmitter Type AKS 41 / 41U REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Liquid level transmitter Type AKS 41 / 41U REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction........................................................................................3
FILTER REGULATORS AND PARTS
COMPRESSED AIR ACCESSORIES PRICING 5-2017 WWW.RAPIDAIRPRODUCTS.COM 800-954-3310 FILTER REGULATORS AND PARTS 175psi MAX INLET, 0-150psi adjustment range PRICE QUANTITY K93210 INLINE REGULATOR W/GAUGE, 1/4"
needle valves 3700, 3800, 3900 Series Forged Body, Integral Bonnet Needle Valves
orged ody, Integral onnet Needle Valves Offered in four different body materials, this group of valves can handle a wide range of general purpose liquid and gas applications. Six types of stem tips are
300 PRO FILTER VALVE OPERATING MANUAL. S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0028 Rev.
300 PRO FILTER VALVE OPERATING MANUAL S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0028 Rev. C Pag 1 di 27 300 PRO FILTER SERVICING MANUAL Document Revision Revision Note Date MAN0028
Description The 4000 Series offers up to 8600 in-lb of torque and 25 gpm (continuous ratings). This is the corner stone of the Char-Lynn line.
Highlights Features displacements, a variety of mounting flanges and output shafts Reliable, proven design High efficiency Environmental protection options Benefits Flexiblilty in designing this motor
RBL High-pressure AISI 316L stainless steel. For all fluids
RBL High-pressure AISI 316L stainless steel For all fluids Connections in high-pressure circuits carrying corrosive liquids and gases... Applications - High-pressure hydrogen circuits - High-pressure circuits
In-Line Check Valves. Features. Valves. Working Pressures to: Flow Ranges to:
Valves In-Line Check Valves Working Pressures to: Flow Ranges to: 5700 psi/393 bar 200 gpm 757 lpm Features Steel constructed check valves are compatible with all non-corrosive liquids. Valves contain
V New HGP 20. Standard grippers 7.5. Economical and versatile. Self centring. Choice of gripping action. Standard grippers.
V New HGP 20 Economical and versatile Self centring Choice of gripping action 2004/10 Subject to change Products 2004/2005 1 / 1 Key features HGD HGP 06 HGP... B HGR HGW System product for handling and
The most energy efficient compressed air filters in the world.
The most energy efficient compressed air filters in the world www.domnickhunter.com The most en compressed air f Don t drive your compr Old filtration technology Ordinary compressed air filters can consume
SERIES HYDRAULIC MOTORS
DT SERIES HYDRULIC MOTORS DT overview The most amazing aspect of the DT Series motor is its huge torque potential from its relatively small size. The DT Series motor is capable of producing output torque
Fittings, Tubing & Nipples
s, Tubing & Nipples P Series Pipe s s to 15,000 psi (1034 bar) Since 1945 utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and manufacturing
Calibration Flow meters for liquids and gases. Testo Industrial Services More assurance, better service.
Calibration Flow meters for liquids and gases Testo Industrial Services More assurance, better service. www.testotis.com Flow rate calibration Calibration of flow meters Due to the requirements of a constant
Submersible. Pumps Motors. 60Hz 4 Submersible Pump. Pumping Solution
Submersible Pumps Motors Hz Submersible Pump Pumping Solution Product data Submersible bore well pumps Construction Submersible motor & pumps for deep wells of (DN mm). Sized for connection to the motor
PROBE CONDITIONING SYSTEM- P/N FOR BATCH FURNACES
December 3, 2007 PROBE CONDITIONING SYSTEM- P/N 13011 FOR BATCH FURNACES INSTRUCTION MANUAL M4505E SSi SUPER SYSTEMS INC. 7205 Edington Drive Cincinnati, Ohio 45249 1-513- 772-0060 1-800- 666-4330 FAX
Model 9306A Six-Jet Atomizer
Particle Instruments Model 9306A Six-Jet Atomizer Instruction Manual P/N 1930099, Revision B February 2003 Manual History The following is a manual history of the Model 9306A Six-Jet Atomizer Instruction
Flowmeters and. Specialty Products
Flowmeters and Specialty Products Chrome Flowmeter Durable, Accurate, Precise, Dependable 1MFA9005 4MFA1001 1MFA2001 1MFA1101 6MFA1001 1MFA3001 1MFA3501 1MFA1001 Specifications Model Gas Scale Increments
S51 Series. Thread Together, Maximum Flow with Minimum Spillage
S51 Series S A F E W A Y H Y D R A U L I C S Document No. 7951 rev. 003 Thread Together, Maximum Flow with Minimum Spillage Minimum Spill, High Flow, Heavy-Duty Quick Coupling SafeWay s S51 Series is a
Adapters, Couplers and Fittings.
Adapters, Couplers and Fittings www.alliedhpi.com 1 Table of Contents QUICK-CONNECT ADAPTERS AND COUPLERS Chemetron Quick-Connect Adapters 3 Chemetron Quick-Connect Adapters ISO 4 Chemetron Quick-Connect
Product Specifications and Usage Information P4405, P4410, & P4420 Genesys 30 Dosimeter Holder System
DESCRIPTION The Thermo Genesys 30 Spectrophotometer (G30) is supplied with specially designed dosimeter holders to fit a variety of dosimeters, including the B3 DoseStix and B3 WINdose dosimeters. The
Plant, components and devices for very high and high pressures (7000 bar and over)
Plant, components and devices for very high and high pressures (7000 bar and over) VALVES AND FITTINGS UP TO 1035 BAR MATERIALS All fittings are manufactured from EN 1.4404 / AISI 316L stainless steel
Cam & Groove Fittings. King Nipples
Cam & Groove Fittings King Nipples Index Aluminum Type A, Male Adapter x Female NPT...3 Type B, Female Coupler x Male NPT...3 Type C, Female Coupler x Hose Shank...4 Type D, Female Coupler x Female NPT...4
FIRG-QSERIES INTERCHANGE > ISO NFPA T HTMA (size 3/8 )
RQSRS NTRAN > SO 128 NPA T3..1 TMA (size ) SO 128 TNAL ATURS AN OPTONS nterchange SO 128 NPA T3..1 TMA (size ) Available sizes Sealing description Nitrile NRKM (VTON )PM KALRZ Material /treatment onnection
CANADA SENSORS TECHNOLOGY INC.
CANADA SENSORS TECHNOLOGY INC. Manufacturer of Advanced Technology Pressure & Level Transmitters PRESSURE TRANSMITTER PROCESS 1 HART Enabled Intrinsically Safe Model Canada Sensors intelligent transmitters
components IC, PB PSCK Pressure switches Digital pressure gauges Pressure gauges GA, GS NV, FM Gauge accessories A, AH/R HLS, H, T
Pressure switches t series IC, PB PSCK t page 188 Digital pressure gauges DG 189 Pressure gauges Gauge accessories Manifolds, couplers, hoses, tubing G GA, GS NV, FM A, AH/R HLS, H, T 190 191 192 High
NELES ROTARYGLOBE CONTROL VALVE, SERIES ZX
NLS ROTRYGLOB CONTROL VLV, SRIS ZX Metso's Neles RotaryGlobe control valve is designed to control a wide range of process liquids, gases and vapors. Its reliable and rugged construction with variety of
Double Block and Bleed ball valve have evolved to replace the process of bolting together individual valves to provide dual isolation.
Bleed valve Double Block and Bleed ball valve have evolved to replace the process of bolting together individual valves to provide dual isolation. This new assembly provides great savings in weight, space
CORESTA RECOMMENDED METHOD N 22
CORESTA RECOMMENDED METHOD N 22 ROUTINE ANALYTICAL CIGARETTE-SMOKING MACHINE SPECIFICATIONS, DEFINITIONS AND STANDARD CONDITIONS (August 1991) 0. INTRODUCTION This CORESTA Recommended Method includes the
Advanced Research Systems, Inc.
4/17/01 Page 1 Huber Goniometer Interface 6.5K to 800K Closed Cycle Cryostat DESCRIPTION The DE-202G has been designed for applications requiring movement of the refrigerator, specifically for goniometers.
BROEN UNIFLEX FITTINGS FOR NON-BURNING 2.0 GASES / VACUUM
BROEN UNIFLEX FITTINGS FOR NON-BURNING 2.0 GASES / ACUUM LAB TABLE OF CONTENTS Content Page Table of Content 2 Product Overview 3 BROEN UniFlex TM BASIC 4-5 Fittings for Non-burnig 2.0 Gases/acuum Turret
Installation, operation and service manual BMA 04
BMA 04 Please read this manual carefully before installing and using the BMA 04 safe measuring coupling. Wigersma & Sikkema warranty obligations do not apply in case of non-observance of this manual. 1
Choose smart valves for balancing Flow
Choose smart valves for balancing Flow For easy balancing of the flow NC Flow balancing valves NC Flow is designed for balancing heating and cooling systems. Incorrectly balanced flow is a common cause
ORIFICE FLOW METERS WITH CHAMBERS MEASURING RINGS
Bulletin E79 rev0 02/03/03 ORIFICE FLOW METERS WITH CHAMBERS MEASURING RINGS POP-U-S SERIES FEATURES UNI PN6 flanges: iron Chamber measuring rings: iron Disc: AISI30 Max. operating temperature: 00 C Max.
Description. Specifications and Ordering Information Proximitor Sensor / interface module/ VDC Housings
Specifications and Ordering Information Proximitor Sensor / interface module/ VDC Housings R Description Although Proximitor and interface are rugged by design, these units and their electrical connections
Dynamic Hollow Cylinder System Proposal
Dynamic Hollow Cylinder System Proposal from Wykeham Farrance Limited Weston Road Slough SL1 4HW England Tel:+44 (0)1753 571241 Fax: +44 (0)1753 811313 E-mail: sales@wfi.co.uk Advanced Soils Testing 2
Original Chiksan Swivel Joints
Original hiksan Swivel Joints Steamlined bore minimizes flow restrictions Smooth, round bore design minimizes turbulence and pressure drop, Longsweep and TripleStep swivel joints have extralong radius
Model Filter. Lubricator PL2000 PL3000 PL4000 PL5000 Port size (NPT) Max. Supply Pressure Max. Operating Pressure Regulating Range.
Filter, Regulator, Lubricator Combinations PC2 PC3 MODULAR DESIGN EASY ASSEMBLY/DISASSEMBLY EASY MATENANCE FE OIL ADJUSTMENT (ONE-TOUC) BOWL GUARD ON UPC4, UPC5 REFILL UNDER PRESSURE Standard Specifications
Dimensions (Pneumatic) In.
Sheet No.: CBPI 3.01 Rev. C Double-Acting s CBBXXX A B C D E F G H J/K L M N CBB315 14.16 7.38 3.25 1.00 1.88 3.46 0.94 0.94 1/4 NPT.313-18 UNC 0.38 2.250 CBB420 16.43 8.57 4.25 1.44 2.13 4.37 1.10 1.10
Installation, operation and service manual BMA 05
BMA 05 Please read this manual carefully before installing and using the BMA 05 safe measuring coupling. Wigersma & Sikkema warranty obligations do not apply in case of non-observance of this manual. 1
Signet 2850 Conductivity/Resistivity Sensor Electronics and Integral Systems
Signet 2850 Conductivity/Resistivity Sensor Electronics and Integral Systems Features Certificate of calibration supplied with all sensors. Universal Mount Custom cell constant programmed into the electronics.
Side Channel R ing Blower
Side Channel R ing Blower ------------------------------------- INSTRUCTION MNUL ------------------------------------ RB20../ 30../ 40../ 50../ 60 / 80.. SERIES CONTENT PGE 1. SFETY REQUIREMENT... 1 2.
MEDICAL GAS FITTINGS & CONNECTIONS Quick Reference Guide
MEDICAL GAS FITTINGS & CONNECTIONS Quick Reference Guide www.baycorporation.com ISO 9001 ISO 13485 Follow us: 867 Canterbury Rd., Westlake, OH 44145 USA P: 440.835.2212 888.835.3800 F: 440.835.1377 E:
SMAC CABLE CATALOGUE. SMAC, the innovative elastomer expert FIT/10/05B
SMAC CABLE CATALOGUE SMAC, the innovative elastomer expert FIT/10/05B SMAC CABLE The SMAC CABLE wire rope isolators are entirely metallic and possess multi-axis characteristics. They are well adapted for
Contents. Coming soon from Teryair!!
Technical products for the ship suppl y industry Contents Teryair is a specialist manufacturer of precision pneumatic tools and marine industrial equipment. Our factories in Mumbai, India are certified
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
oratory locations: 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Folgate House Folgate Road North Walsham Norfolk NR28 0AJ Contact: Mr P C A Marks Tel: +44 (0)1692 500555 Fax: +44 (0)1692
Signet 2850 Conductivity/Resistivity Sensor Electronics and Integral Systems with PVDF Sensor
Signet 2850 Conductivity/Resistivity Sensor Electronics and Integral Systems with PVDF Sensor Features Test certificate supplied with all sensors Universal Mount Custom cell constant programmed into the
Dimensions (Pneumatic) In.
Sheet No.: CPI 3.01 RevB Double-Acting s CBAXXX A B C D E F G H J/K L M N CBA315 14.16 7.38 3.25 1.09 1.88 3.46 0.94 0.94 1/4 NPT.313-18 UNC 0.38 2.250 CBA420 16.43 8.57 4.25 1.38 2.13 4.37 1.10 1.10 3/8
Dill Air Controls Gauge and Air Chuck Catalog
Air Controls Gauge and Air Chuck Catalog Member of Tire and Rim Association ISO Registered Organization 1903 2009 Dill # Range Comments Finish Pack Available in various colors or 5600 10-75 PSI your company
Fittings & Accessories
Fittings & Accessories Adalet offers a range of fittings and accessories for use in general purpose or industrial locations. These fittings and accessories are used in conjunction with our industrial electrical
Direct Vent Energy Saver Models DS Series
RESIDENTIAL GAS REPLACEMENT PARTS LIST Direct Vent Energy Saver Models DS Series Includes Hydrojet Total Performance System Effective: September, 2009 ECO 7439 NOTE: BOTH MODEL AND SERIAL NUMBERS ARE REQUIRED
Safe. Clean. Rapid. DAC UNIVERSAL cleans, lubricates and sterilizes at the touch of a button
CAD/CAM SYSTEMS INSTRUMENTS HYGIENE SYSTEMS TREATMENT CENTERS IMAGING SYSTEMS DAC UNIVERSAL cleans, lubricates and sterilizes at the touch of a button Safe. Clean. Rapid. DAC UNIVERSAL The hygiene formula