Goniometer WT-85. Goniometer WT-100. Goniometer WT-90. Goniometer WT-120. // West //

Transcription

1 Goniometer Rotation Stages Goniometer WT-85 Goniometer WT-0 Goniometer WT-90 Goniometer WT // // East West //

2 5.192 Goniometer WT-85 FACTS space conditions or where a clear aperture Fx(N) Fy(N) Fz(N) Mx(Nm) My(Nm) Mz(Nm) k x(µrad/nm) k y(µrad/nm) DC-B Phase Load characteristics is needed. Typical applications are metrology tasks in the area of laser technology and radiology. The WT-85 and WT-0 goniometer stages are designed to work together. When mounted orthogonally to each other they have a common center of rotation. The WT-85 has a 30 mm clear aperture. A unique driving mechanism insures a very quiet and smooth motion. The stage is driven directly by a DC or 2-phase stepper motor and can achieve a relatively high speed. The WT-85 goniometer stage is designed The WT-85 stages are available with an for all tasks where conventional rotation optional optical angular scale and are stages cannot be used due to limited equipped with two limit switches. TECHNICAL DATA Travel range ( ) Wobble (Bearings) (µrad) ± 1 Weight (kg) Motor 0.9 DC-B-070 2Phase (RE) (FS) Linear scale KEY FEATURES Speed max. ( /sec) Resolution calculated ( ) Uni-directional repeatability down to Resolution typical ( ) Maximum speed /sec Bi-directional Repeatability ( ) ± 0.00 ± 0.00 ± Uni-directional Repeatability ( ) Nominal Current (A) Load capacity up to 2 kg Integrated mechanical limit switches Voltage Range (V) Clear aperture 30 mm Reduction 675:1 Precise, smooth continuous motion Accuracy on request Option: Integrated angular scale Velocity range ( /sec) Together with WT-0 one centre of rotation Material Aluminum, black anodized Note: FS = full step, RE = rotary encoder More info: Detailed information concerning motors and encoders, see appendix. Error and technical modifications are subject to change

3 Goniometer WT DC-B-070 2Phase x M x6 2x M6 x x nh7 x6 2x nh7 x7 12 2x Ø6. / vø x v.5 / Ø x M6 x8 2.5 n30h7 Order No o 0 o3 DC-B Phase x n6. without 0 2x nh7 x8 x M x8, Angular scale 1 mm // info@pi-usa.us // East West //

4 5.190 Goniometer WT-0 FACTS space conditions or where a clear aperture Fx(N) Fy(N) Fz(N) Mx(Nm) My(Nm) Mz(Nm) k x(µrad/nm) k y(µrad/nm) DC-B Phase Load characteristics is needed. Typical applications are metrology tasks in the area of laser technology and radiology. The WT-0 and WT-85 goniometer stages are designed to work together. When mounted orthogonally to each other they have a common center of rotation. The WT-0 has a 60 x mm clear aperture. A unique driving mechanism insures a very quiet and smooth motion. The stages are driven directly by a DC or 2-phase stepper motor and can achieve a relatively high speed. The WT-0 goniometer stage is designed The WT-0 stage is available with for all tasks where conventional rotation optional optical angular scales and is stages cannot be used due to limited equipped with two limit switches. TECHNICAL DATA Travel range ( ) Wobble (Bearings) (µrad) ± 1 Weight (kg) Motor 0.9 DC-B-070 2Phase (RE) (FS) Linear scale KEY FEATURES Speed max. ( /sec) Resolution calculated ( ) Uni-directional repeatability down to Resolution typical ( ) Maximum speed /sec Bi-directional Repeatability ( ) ± 0.00 ± 0.00 ± Uni-directional Repeatability ( ) Nominal Current (A) Load capacity up to 2 kg Integrated mechanical limit switches Voltage Range (V) Clear aperture 60 x mm Reduction 900:1 Precise, smooth continuous motion Accuracy on request Together with WT-85 one centre of rotation Velocity range ( /sec) Option: Integrated angular scale Material Aluminum, black anodized Note: FS = full step, RE = rotary encoder More info: Detailed information concerning motors and encoders, see appendix. Error and technical modifications are subject to change

5 Goniometer WT DC-B-070 2Phase-020 2x n.8 x M x x nh7 x x n x Ø.5 / vø x v.5 / Ø6. 2x vø8.5 / Ø R Order No DC-B Phase o x n.5 without 0 2x nh7 x6 52 2x M6 x5, Angular scale 1 mm // info@pi-usa.us // East West //

6 5.188 Goniometer WT-90 FACTS Fy(N) Fz(N) Mx(Nm) My(Nm) Mz(Nm) k x(µrad/nm) k y(µrad/nm) DC-B Phase Load characteristics conditions. space Fx(N) applications in Typical the uses area of are laser positioning and radiology. The WT-120 and WT-90 goniometer stages are matched to work together. When mounted orthogonally to each other they have a common center of rotation. The WT-90 is equipped with a ground bearing guide. The ground and hardened worm screw and worm gear combination produces a very quiet and smooth motion. The stages are directly driven by a DC or 2-phase stepper motor and can achieve a relatively high speed. The WT-90 goniometer stage is designed The WT-90 stages can be equipped with an for all tasks where conventional rotation optical angular scale system and have two stages cannot be used due to limited limit switches. TECHNICAL DATA Travel range ( ) 90 Wobble (Bearings) (µrad) ± 1 Weight (kg) Motor 2.8 DC-B-00 2Phase-08 Linear scale Speed max. ( /sec) Resolution calculated ( ) KEY FEATURES Uni-directional repeatability down to (RE) Bi-directional Repeatability ( ) ± 0.02 ± Uni-directional Repeatability ( ) Nominal Current (A) 3.8 Maximum speed /sec Voltage Range (V) 2 Load capacity up to 8 kg Worm gear reduction Integrated mechanical limit switches Accuracy Together with WT-120 one centre of rotation Velocity range ( /sec) Option: Integrated angular scale (FS) Resolution typical ( ) Material :1 on request... Aluminum, black anodized, stainless steel, red brass Note: FS = full step, RE = rotary encoder More info: Detailed information concerning motors and encoders, see appendix. Error and technical modifications are subject to change

7 Goniometer WT DC-B-00 2Phase-08 2x n.5 2x n x M6-6H x12 2x M - 6H x8 3 2x n3h7 x 30 2x nh7 x x M - 6H x8 67 o3 2x M6-6H x Order No DC-B Phase-08 2 without 0, Angular scale M6-6H x mm x M - 6H x8 // info@pi-usa.us // East West //

8 5.186 Goniometer WT-120 FACTS Fy(N) Fz(N) Mx(Nm) My(Nm) Mz(Nm) k x(µrad/nm) k y(µrad/nm) DC-B Phase Load characteristics conditions. space Fx(N) applications in Typical the uses area of are laser positioning and radiology. The WT-120 and WT-90 goniometer stages are matched to work together. When mounted orthogonally to each other they have a common center of rotation. The WT-120 stage is equipped with a ground bearing guide. The ground and hardened worm screw and worm gear combination produces a very quiet and smooth motion. The stages are directly driven by a DC or 2-phase stepper motor and can achieve a relatively high KEY FEATURES The WT-120 goniometer stage is designed speed. The WT-120 stages can be for all tasks where conventional rotation equipped with an optical angular scale stages cannot be used due to limited system and have two limit switches. TECHNICAL DATA Travel range ( ) 90 Uni-directional repeatability down to Wobble (Bearings) (µrad) ± 1 Max. speed 30 /sec Weight (kg) 11.5 Load capacity up to 20 kg Motor integrated Mechanical Limit Switches Linear scale Limit switch adjustable DC-B-082 2Phase Speed max. ( /sec) (RE) 0.01 (FS) Option: angular scale Resolution typical ( ) Uni-directional repeatability down to Bi-directional Repeatability ( ) ± 0.02 ± 0.02 ± Uni-directional Repeatability ( ) Maximum speed 30 /sec Resolution calculated ( ) Nominal Current (A) Load capacity up to 20 kg Voltage Range (V) Integrated mechanical limit switches Worm gear reduction Limit switch adjustable Accuracy Option: angular scale Velocity range ( /sec) Together with WT-90 one centre of rotation Material 8 1:1 on request Aluminum, black anodized, stainless steel, red brass Note: FS = full step, RE = rotary encoder More info: Detailed information concerning motors and encoders, see appendix. Error and technical modifications are subject to change

9 Goniometer WT DC-B-082 2Phase-070 8x n x M6 x x nh7 x6 0 2x n3h7 x6 8x vø11 / Ø x M6 x o3 x M x6 Order No DC-B Phase without x n3h7 x6 2x nh7 x6, Angular scale 1 mm // info@pi-usa.us // East West //

10 5.19 Tip-Tilt Stage TT-65 FACTS Load characteristics Fx (N) Fy (N) Fz (N) Mx (Nm) My (Nm) Mz (Nm) DC-B The TT-65 tip-tilt stage was designed for applications where optical elements have to be remotely tilted in an optical beam path. The tilt range in both axes is 5. The stage can be mounted horizontally on linear stages like LS-65 or vertically, for example in our CAMPUS systems. The tiptilt stage is equipped with a reference switch and is offered with a DC or stepper motor. TECHNICAL DATA Travel range ( ) 5 Weight (kg) 0.5 KEY FEATURES Uni-directional repeatability down to 0.00 Travel range in tip, tilt 5 Maximum speed 0. /sec Load capacity up to 0.5 kg Integrated mechanical limit switches Clear aperture mm diameter Motor DC-B-005 Speed max. ( /sec) 0. Resolution calculated ( ) 8675 (RE) Resolution typical ( ) Bi-directional Repeatability ( ) ± 0.00 Uni-directional Repeatability ( ) 0.00 Nominal Current (A) 0.08 Voltage Range (V) 12 Accuracy on request Velocity range ( /sec) Material Note: FS = full step, RE = rotary encoder More info: Detailed information concerning motors and encoders, see appendix. Aluminum, black anodized Error and technical modifications are subject to change

11 Tip-Tilt Stage TT ~570 DC-B-005 ± ± Ø.5 (x) x M3 x, Ø x Ø2H7 x3,5 x M2.5 x x M3 x x Ø1,5H7 x Order No Montagezubehör: Aufbauplatte x M3 x6 o3 nh7 x7 DC-B OLS-0, Optical limit switches 3 mm // info@pi-usa.us // East West //

12 USA (East) & CANADA USA (West) & MEXICO GERMANY PI (Physik Instrumente) L.P. 16 Albert St. Auburn, MA 001 Tel: +1 (8) Fax: +1 (8) PI (Physik Instrumente) L.P. 520 Trabuco Rd., Suite 0 Irvine, CA Tel: +1 (99) Fax: +1 (99) info@pi-usa.us Headquarters: PI micos GmbH Freiburger Strasse 30 D-7927 Eschbach GERMANY Phone: Fax: home: info@pimicos.com Physik Instrumente (PI) GmbH & Co. KG Auf der Römerstraße Karlsruhe/Palmbach Tel: +9 (721) 86-0 Fax: +9 (721) info@pi.ws Call Us Today (East) (West)