B Electrical Connector Subsea / Underwater / Marine
|
|
|
- Marsha Townsend
- 5 years ago
- Views:
Transcription
1 Tel: + 0 ax: mail: sales@r-marine.com lectrical onnector Subsea / Underwater / Marine The most common applications: ROV ive ell onnectors Underwater ameras and ights Underwater Thruster Strain Termination Key eature: Multi size shell body Up to contacts Pressure up to,00 Psi (Mated) Open face pressure up to,00 Psi Oil filled available as standard (O) Up to 000 V Up to amp Revision 0-0
2 Tel: + 0 ax: mail: sales@r-marine.com Options: Pressure balanced Oil illed (PO) ield Installable Mixed contact sizes for power/data requirement espoke design/configuration to suit customer requirements at no extra cost vailable in alternative materials: luminium, Titanium etc. Testing: Pressure testing up to,00 Psi urability testing with 00 mate and re-mate cycles Open face pressure testing up to,00 Psi Notes: or more information s contact R. Part Numbering System - ulkhead xample R 0 M INTR TYP U NUMR NT IN MM (I 00 MM) M - M/- M NUMR O ONTTS ONNTOR SIZ R - UK ONNTOR RPT Part Numbering System-onnector xample P 0 M O Standard Mechanical Specification: OMPONNT Shell ody ontact Insert lectrical ontacts Plating etails Retaining Nut 'O' Rings acking Washer NOTS: ontact R for special order materials. INTR TYP U NUMR NT IN MM (I 00 MM) O-OI I M - M/- M NUMR O ONTTS ONNTOR SIZ P- PU IN IN MTRI Stainless Steel poxy / Peek eaded Nickel opper or K um cid old over.um Nickel opper lash Stainless Steel / luminium ronze Nitrile NI0 lack cetal Revision 0-0
3 Tel: + (0) ax: + (0) 0 mail: sales@r-marine.com '' onnector rawing Ref. Numbers langed ulkhead onnector Receptacle - R N SPOT x P M M J K M J K -'O'Ring M-'O'Ring N P TYP..... N/ N/ N/ S N/ 0./ N/ N/ N/ S S0 0.0/ N/ N/ N/ S N/ 0 0. N/.. N/ N/ S S0 0.0/.0 0 N/ 0 N/.. N/ / N/ N/ N/ S S0./ N/ N/ N/ S N/./ N/ N/ N/ S0 S0./. 0 ll dimension in mm Revision 0-0
4 J MIN. SPOT Tel: + (0) ax: + (0) 0 mail: sales@r-marine.com '' onnector rawing Ref. Numbers 0. ulkhead onnector Receptacle - R 0. x J MIN SPOT 0. Thread to suit ulkhead K 0. To Suit arrel Seal P P M P / M P -ex. J K -'O'Ring M-'O'Ring P TYP 0. N/ N/ N/ N/ S0 N/ /- UN 0 0. N/ N/ N/ S0 N/ /-0 UN 0 0. N/ N/ N/ 0 N/ S0 N/ /- UN 0 0 N/ N/ N/ 0 N/ S0 N/ /- UN 0 0. N/ N/ N/ 0 N/ S0 N/ /- UN 0 0 N/ N/ N/ N/ S0 N/.0- UNS 0 0. N/ N/ N/ 0 N/ S0 N/ /- UN N/. 0./. S0 x. /- UN /. S0 x. /-0 UN N/ N/ N/ 0 N/ S0 N/ /- UN N/.../. S0 S0 /-0 UN / N/ N/ N/ 0 N/ S0 N/ /-0 UN /. 0 N/ /0. S00 S0 /-0 UN P M P ll dimension in mm Revision 0-0
5 J Tel: + (0) ax: + (0) 0 mail: sales@r-marine.com '' onnector rawing Ref. Numbers ulkhead onnector Receptacle - R J x K Min.Spotface Thread / - Thread / -ex. J-'O'Ring K TYP "- UNS S0./ /"- UN S0 0./ /"- UN S0.0/.0 ll dimension in mm Revision 0-0
6 Tel: + 0 ax: mail: sales@r-marine.com Reference imensions '' onnector Oil illed able onnector Receptacle (P) -'O' Ring TYP x. 0 ackshell able onnector Receptacle-Straight (P) -'O' Ring -'O'Ring -'O'Ring TYP.... x. X. X x. x. x 0 ackshell able onnector Receptacle-0 (PR) -'O'Ring -'O'Ring -'O'Ring TYP..... x. x. x x. x. x 0 ll dimension in mm Revision 0-0
7 Tel: + 0 ax: mail: sales@r-marine.com Reference imensions '' onnector ow Profile 0 ulkhead onnector Receptacle - langed (R) J 0 MIN SPOT x K.. J K 'O'Ring TYP S P0 ow Profile 0 ulkhead onnector Receptacle - Threaded (R) K / J M MIN. SPOT 0. Thread to suit Interface J K -'O'Ring M TYP 0 /- UN 0 S0 0 PT0 0 /-0 UN 0 S0 0 PT UNS N/ 0 S0 PT0 0 0 /-0 UN 0 0 S0 0 PT0 ll dimension in mm Revision 0-0
8 Tel: + 0 ax: mail: sales@r-marine.com Reference imensions '' onnector ulkhead lanking Plug - P -'O'Ring.. x. able onnector lanking Plug - R ll dimension in mm Revision 0-0
9 Tel: + 0 ax: mail: sales@r-marine.com Reference imensions '' onnector Moulded ulkhead Receptacle (R) 0 0 Moulded able onnector Receptacle-Straight/0 -'O'Ring. 0. x. ll dimension in mm Revision 0-0
10 Tel: + 0 ax: mail: sales@r-marine.com ssembled imensions '' onnector P R0 R0 R0 R0 R0 R0 PO0 PO0 PO0 PRO0 PRO0 R0 R0 P PR P PO0 PO0 PO0 PRO0 PRO0 P PR R0/0/0/0/ R R0.. 0 R0 0.. ll dimension in mm Revision 0-0 0
11 Tel: + 0 ax: mail: sales@r-marine.com ssembled imensions '' onnector P R0 R0 R0 R0 R0 R0 R0 R0 PO0 PO0 PO0 R0 R0 PRO0 PRO0 R R P R PR ll dimension in mm R R R P PO0 PO0 PO0 PRO0 PRO0 P PR R0/0/0/0/0/0// R0/0/0/ R R R/ Revision 0-0
12 Tel: + 0 ax: mail: sales@r-marine.com Pin ace View WY WY WY-YRI 0 0 WY WY 0 0 WY-YRI WY-YRI 0 WY 0 WY WY-YRI WY-YRI 0 WY WY 0 WY WY WY WY Socket ace View WY WY-YRI WY WY-YRI WY WY-YRI WY WY 0 WY 0 WY-YRI WY WY-YRI WY WY WY WY WY. Pin NOTS: urrent rating maybe impacted by cable selection ifferent pin configurations contact R Standard cable gauge for,, way - W ; & Way - W 0,,,,, way - W Single pin rate: up tomp / Voltage: up to000v Multi pin rate contacts - Please contact engineering@r-marine.com. Pin. Pin.0 Pin ll dimension in mm Revision 0-0
13 Tel: + 0 ax: mail: sales@r-marine.com Pin ace View WY WY WY Socket ace View WY WY WY.0 Pin 0. Pin NOTS: urrent rating maybe impacted by cable selection ifferent pin configurations contact R Standard cable gauge for way- awg,, way - W Single pin rate: up tomp / Voltage: up to000v Multi pin rate contacts - Please contact engineering@r-marine.com ll dimension in mm Revision 0-0
14 Tel: + 0 ax: mail: sales@r-marine.com Pin ace View WY-PO 0 WY-PO WY-PO WY-PO WY-PO Socket ace View WY-PO 0 WY-PO WY-PO WY-PO WY-PO. Pin. Pin.0 Pin NOTS: urrent rating maybe impacted by cable selection ifferent pin configurations contact R Standard cable gauge for way - W 0,, way - W Single pin rate: up tomp / Voltage: up to000v Multi pin rate contacts - Please contact engineering@r-marine.com ll dimension in mm Revision 0-0
A Electrical Connector Subsea / Underwater / Marine
www.r-marine.com Tel: + 0 8 ax: + 0 8 0 mail: sales@r-marine.com lectrical onnector Subsea / Underwater / Marine The most common applications: ROV ive ell onnectors Underwater ameras and Lights Underwater
A Electrical Connector Subsea / Underwater / Marine
www.r-marine.com Tel: + 0 8 ax: + 0 8 0 mail: sales@r-marine.com lectrical onnector Subsea / Underwater / Marine The most common applications: ROV ive ell onnectors Underwater ameras and Lights Underwater
EZ Inline Series. Air Control Valves. Section D
Z Inline Series Air ontrol Valves Section www.parker.com/pneu/zinline AX Viking Z asic Valve unctions...2- asic Valve eatures...4-5 Solenoid Operated Valves ommon Part umbers...6 odel umber Index...7 Remote
Amphenol. Military standard connectors Bayonet coupling connectors High tension connectors. Ampheno. DaeShin. Amphenol Daeshin Korea
mpheno aeshin mphenol Military standard connectors Bayonet coupling connectors High tension connectors mphenol aeshin Korea mpheno aeshin mphenol R The ompany mphenol orporation is one of the world s largest
The Do s and Don ts of Pressure Transducers
The Do s and Don ts of Pressure Transducers ABSTRACT When specifying a pressure transducer for a process measurement, a number of items have to be considered. Some of the more important ones are discussed
MS/Standard B - Class
MS/Standard B lass mphenol R mphenol ML5015 onnectors MS B lass MSB class connector is a general duty standard cylindrical connector. t is a widely used for the automotive machine tool & welding industries,
Air Preparation Equipment
rochure ir Preparation quipment Setting a new standard for: Quality Reliability Value lobal ompatibility ilters M Series M ir Preparation quipment M -8-S-W- MOL imensions (mm, except where noted) RKT INLU
Easy assembly with standard tools. Fully insulated for direct mounting to steel panels
Cam-Lok J Series Connectors or NEMA 4 Cam-Lok J Series Connectors are specifically designed to meet the needs of demanding portable applications. J Series Plugs and Receptacles are the proven industry
12 series (Pneufit) Push-in fittings Ø 1/8... 1/2, Ø mm tube size, BSP and NPT threads
2 series (Pneufit) Push-in fittings Ø /8... /2, Ø 4... 2 mm tube size, SP and NPT threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage ll taper
Fittings, Tubing & Nipples
s, Tubing & Nipples P Series Pipe s s to 15,000 psi (1034 bar) Since 1945 utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and manufacturing
3M Legal Information Privacy Policy
Insulation Resistance >1 X 10^9 Ohms @ 500 Vdc Interface Grid " x " Interface Style Header (Rectangular Plug) Latch/Ejector Type None Markings 3M Logo and Orientation Triangle Mounting Option None Non-Operating
needle valves 3700, 3800, 3900 Series Forged Body, Integral Bonnet Needle Valves
orged ody, Integral onnet Needle Valves Offered in four different body materials, this group of valves can handle a wide range of general purpose liquid and gas applications. Six types of stem tips are
12 series (Pneufit) Push-in fittings
> > Port size: Ø /8... /2, Ø 4... 2 mm tube size, SP and NPT threads > > Very compact units > > asy tube insertion for rapid assembly of pneumatic circuits > > Positive tube anchorage > > ll taper threads
SECTION 5A SWL SERIES CONNECTORS
ECTION 5 W EIE CONNECTO EQUIENT TO THE PHENO/ENDIX QW as well as the ITT Cannon CW eries. HIGH CUENT CPCITY for power distribution network and inputs into large equipment. 5 UGGED CONTUCTION consists of
Instrument Assembly Quick Guide
Instrument ssembly Quick Guide assembly_qg_br.0, 07/8 08 shcroft Inc. assembly_qg_br.0, Rev., 06/8 info@.800.38.858 ssembly Resource ssembly Information LL SHROFT SSEMLIES RE DESIGNED Y OUR ENGINEERS TO
Table of Contents Table of Contents
9000 Table of ontents Table of ontents Introduction...................................................................9000. 9000 Scope of esign...........................................................9000.3
Cam & Groove Fittings. King Nipples
Cam & Groove Fittings King Nipples Index Aluminum Type A, Male Adapter x Female NPT...3 Type B, Female Coupler x Male NPT...3 Type C, Female Coupler x Hose Shank...4 Type D, Female Coupler x Female NPT...4
747 Series Stopper Plugs Cable Gland Accessories Flameproof.
747 Series Stopper Plugs Flameproof. Class I, Groups, A, B, C, D Type 4X; Ex d II Component Equipment Stopper plug is designed for use from the outside of the Idea for use on flameproof electrical equipment
Table of Contents. Mark 3, SPA 3 & PA 3 Series
Table of Contents...3-9 NSI Symbols... 3 Technical and Operating Data.... How to Order....5-6 Valve with ase....7-8 Manifold lock ssembly...9-0 Sandwich ressure Regulator.... Regulator Service Kits....
High current plug-in connector
2017.12 High current plug-in connector with a wrong insertion prevention mechanism Plug-in Connector (A Wrong Insertion Prevention Mechanism) Features of the high current plug-in connector with a wrong
In-Line Accessories. In-Line Pressure Gauges. Pressure Gauges. In-Line Accessories
Pressure Gauges Pressure gauges for monitoring system pressure Hoses and test points for sampling oil and determining ISO cleanliness levels Flanges to connect components Valves for system control In-Line
ADAPTER IECEx-ATEX, RNC, IP66 / 68, NICKEL PLATED BRASS
ADAPTER IECEx-ATEX, RNC, IP66 / 68, NICKEL PLATED BRASS Anamet IECEx-ATEX adapter fitting, type RNC and RAC, nickel plated brass Type RNC IECEx-ATEX approved 45 or 90 nickel plated brass adapter, male
Sep2018 Rev B1
Product Specification 12Sep2018 Rev B1 HD30 Series Connector System 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the TE Connectivity (TE) HD30 Series
Side Channel R ing Blower
Side Channel R ing Blower ------------------------------------- INSTRUCTION MNUL ------------------------------------ RB20../ 30../ 40../ 50../ 60 / 80.. SERIES CONTENT PGE 1. SFETY REQUIREMENT... 1 2.
All dimensions are in mm. Plug: Coding Pin: HOODS TOP ENTRY HOODS. NPT Part # NP NP 10.
HA 3&4 Plugs & Receptacles HA 3&4 Housings: Single Lever on Base SCREW TERMINATED INSERTS HA 3 HA 4 All dimensions are in mm. HA 3 HA 4 Plug: 10.40 10.4310 Receptacle: 10.40 10.43 Coding Pin: 10.4513 TOP
ROTARY UNION 9000 SERIES GENERAL PURPOSE MODELS ADDED MODELS ADDED. Operating Parameters FEATURES & BENEFITS MEDIA PRESSURE* TEMPERATURE* SPEED*
ROTARY UNION 9 SERIES GENERAL PURPOSE Operating Parameters Steam, Hot Oil, Water MEDIA PRESSURE* 25 psi (Water), 75 psi (Steam), psi (Hot Oil) MODELS ADDED MODELS ADDED TEMPERATURE* 6 F (Hot Oil), 378
Original Chiksan Swivel Joints
Original hiksan Swivel Joints Steamlined bore minimizes flow restrictions Smooth, round bore design minimizes turbulence and pressure drop, Longsweep and TripleStep swivel joints have extralong radius
Steri-Oss Compatible Components
Original Non-Hex & Direct To The Implant Impression opings nalogs IMPRESSION OPING To Fit Implant The impression coping for the Steri-Oss Original Non-Hex implant is used to take an impression of the implant
Orthotics. capability from a minimum inventory of interconnecting modular components.
Orthotics The integrated KFO system was designed to give the orthotist maximum prescriptionfilling capability from a minimum inventory of interconnecting modular components. KFO is a completely modular
ore Mounting XP 9/16" (02) 3/4" (04) $27.15 $28.85 $28.95 $ /16" (09) $ /2" (17) $38.80 $32.85 $ " (31) $60.85 $65.80 ore Mounti
The model number of all P consists of three alphanumeric clusters. These designate product type, bore size and stroke length, and options. Please refer elrin nd ap ylinder ore Size 02 9/16" 04 3/4" 09
FIRG-QSERIES INTERCHANGE > ISO NFPA T HTMA (size 3/8 )
RQSRS NTRAN > SO 128 NPA T3..1 TMA (size ) SO 128 TNAL ATURS AN OPTONS nterchange SO 128 NPA T3..1 TMA (size ) Available sizes Sealing description Nitrile NRKM (VTON )PM KALRZ Material /treatment onnection
( 6.48) SECTION S-S LEGS DIMENSION (2X) WIDTH: THICKNESS:
1 3 4 PRT NUMER ONTT RE PLTING 1LF.75um GOL 1FLF GOL FLS 6.65.63 M3.5 1.. 3..38 8.1 ( 9.) OF IM..9 ( 6.48).1 S 11.45 1.45 7.9 R.4.1 7.5 14.5 6.5.9 13.5.9 S Z 1.9 Y 3.3.5 SETION SS SEE ETIL.9 3.18 1.51.1
TECHNICAL CHARACTERISTICS BEHAVIOUR WITH CHEMICAL AND ATMOSPHERIC AGENTS
LE GLNS able glands and plastic accessories Regulatory ompliance: able Glands: EN 50262; IE 62444 Metric pitch: IE/EN 60243 PG pitch: IN 40430 ouplings and cable glands: EN 61386-1 e EN 60670-1 as applicable
Accessories for LV AirGuard Cables Glands, Connectors and Installation Tools.
Accessories for LV AirGuard Cables Glands, Connectors and Installation Tools. A Non-Potted Gland TECHNICAL DATA Design Specification BS 6121:Part 1:1989, IEC 62444, EN 62444 Mechanical Classifications*
Part 2: Internal Tri-Channel Connection. Nobel Biocare Compatible Components. Tri-Channel Internal Connection Implants
Select Part 2 Internal Tri-Channel Connection Replace Select NobelSpeedy Replace NobelReplace and compatible implants listed below Select Part 2 contains only the Tri-Channel Internal Connection compatible
PIPELINE PIGS CLEANING BATCHING GAUGING
PIPELINE PIGS LENING THING GUGING 1.8.9.1 leaning pigs Model GW leaning Pig Sizes 2 to 8 Standard with steel wire wheel brushes. Specify discs for bidirectional operation. Model G leaning pig Sizes 6 to
C6L/C120L Lockbolt Grade 5.8/8.8
T: +44 (0) 1562 513910 F: +44 (0) 1562 69666 E: sales@rivco.co.uk W: www.rivco.co.uk Vibration Resistant Provides total resistance to vibratory loosening giving greataer reliability in service. 6L/120L
Pocket Reference Chart
Pocket Reference Chart Rings and Plates Half Rings (SST) Internal 10-1317 80 mm Internal 10-1300 100 mm 10-1301 110 mm 10-1306 160 mm 10-1302 120 mm 10-1307 180 mm 10-1303 130 mm 10-1308 200 mm 10-1304
JB90A. FS65 Balanced-Pressure Series
J90 S W I V E L J O I N T S S65 alanced-pressure Series eatures and enefits New eroquip S65 alanced-pressure Series swivel joints answer customer requests for a more cost competitive, compact product.
PEEK SS Columns & Guard Columns
PEEK SS Columns & Guard Columns ~ Stainless Steel Analytical Columns ~ PEEK Columns ID 2.1, 4.0, 4.6 & 7.5 mm ~ Jour-Guard Cartridges Stainless Steel or PEEK ~ Stainless Steel End Fittings 1/4 OD Columns
HMS4 and HMSA7 seals. Radial shaft seals
Radial shaft seals HMS4 and HMSA7 seals HMS4 and HMSA7 seals are primarily availale in inch sizes ut are also availale in a very limited numer of metric sizes that are in the process of eing replaced y
GRUNDFOS DATA BOOKLET. BM, BMhp. Booster Modules 50/60 Hz
GRUNDFOS DATA BOOKLET BM, BMhp Booster Modules 5/6 z BM, BMhp Table of contents 1. BM applications 4 Pumped liquids 4 2. BM product introduction 4 Standard pumps 4 Construction 4 Motor 4 3. BM, BMhp performance
MFD Filters (MGF Series) 8.3. MFD Mini Regulators (MSR Series) 8.4. MFD General Purpose Regulators (MGR Series) 8.5
ir Preparation Equipment MFD Filters (MGF Series) 8.3 MFD Mini Regulators (MSR Series) 8.4 MFD General Purpose Regulators (MGR Series) 8.5 MFD General Purpose Lubricators (MGL Series) 8.6 MFD Filter -
C O M P R E H E N S I V E S A F E T Y W I T H A T E X B Y C O N T R O L W E L L
C O M P R E H E N S I V E S A F E T Y W I T H A T E X B Y C O N T R O L W E L L The current international regulations for machine manufacturers (94/9/EC) and operators (99/9/EC) prescribe high safety levels.
ROTARY UNION 5000 SERIES STAINLESS STEEL - GENERAL PURPOSE MODELS ADDED. Operating Parameters FEATURES & BENEFITS CONFIGURATION OPTIONS
ROTARY UNION 5 SERIES STAINESS STEE - GENERA PURPOSE Operating Parameters SPEED,, 3,6 (MT) PRESSURE 75 psi (Water), psi (Steam), psi (Hot Oil), 3 psi (Air) TEMPERATURE 3 F (Water), 35 F (Steam), 395 F
BGS MODEL HP-165M FLUID END PARTS LIST
BGS MODEL HP-165M FLUID END PARTS LIST ITEM PART NUMBER REQ'D PART DESCRIPTION NO. QTY 001 BGS 008-024179-350 1 POWER FRAME 007 BGS 170-012005-353 1 PIPE PLUG, MAGNETIC 014 BGS 001-013059-999 1 FILTER/BREATHER
MOUNTING ACCESSORIES, GAS HEATERS
MOUNTING SSORIS, GS HTRS YLINDR RKTS Wall mount cylinder holders are an essential accessory to all manifolds. or safe containment of cylinders not greater than 9 12 in diameter. quipped with plated safety
2 size; 1 4 NPT lower and back connection available in 2 and sizes; 1 4 NPT lower connection available in size
3 ry auges, Steel ase, ronze Tube, rass Socket, ±3-2-3% ccuracy STNR TURS vailable in 1 2, 2, 2 2 and 3 2 sizes lack fi nish steel case and ring with plastic window Panel gauge case is black fi nish steel
Fieldbus Systems. Fieldbus System: Devicenet
Fieldbus Systems Fieldbus System: Devicenet For a simple choice of outstanding network components, Balluff offers the entire spectrum of high-performance network technology. For applications in the USA,
RLB Series Radial Inductors
*RoHS *RoHS *RoHS OMPLINT OMPLINT OMPLINT eatures our types available High rated current for high current circuits vailable in 12 series RoHS compliant* pplications Power supplies D/D converters General
Anamet galvanised steel fi ttings for Sealtite.
namet galvanised steel fi ttings for Sealtite. NMT The galvanised steel namet fi ttings can be used with all types of naconda Sealtite (except NP) and are particularly used where a wider temperature range
Tru-Fit 10k Fittings
Tru-Fit 10k Fittings TruFit 10K Pipe and Adapter Fittings are designed and manufactured to provide a reliable connection in high pressure systems running to 10,000 psi. Manufactured from fully-traceable
Description. Specifications and Ordering Information Proximitor Sensor / interface module/ VDC Housings
Specifications and Ordering Information Proximitor Sensor / interface module/ VDC Housings R Description Although Proximitor and interface are rugged by design, these units and their electrical connections
KKE 1500 Capsule weighing machine Replacement spare parts
KKE 1500 Capsule weighing machine Replacement spare parts INTERNATIONAL INVENTORY MANAGEMENT 456 MANNING AVENUE ELON, NC 27244 USA TEL 001 336 584 4777 FAX 001 336 584 4950 410 NORTH 1650 WEST SPRINGVILLE,
POWERED BY. 200Watts. Dual Batteries in Series
POWERED BY 200Watts Dual 18650 Batteries in Series 1 1. OVERVIEW 2. STANDARD PACKAGE 3. MAIN FEATURES 4. BASIC OPERATION 5. PRECAUTIONS 6. WARRANTY 2 1. OVERVIEW Fire Button OLED Screen Display 510 Atomizer
Product Catalog. Since 1985» Simple. Predictable. Profitable.
Product Catalog Since 1985» Simple. Predictable. Profitable. 2011 IMPLANTS 3.0mm Well Integra-CP Part No. DIAMETER LENGTH 345-306 4.5mm 6.0mm 345-308 4.5mm 8.0mm 345-311 4.5mm 11.0mm 350-305 5.0mm 5.0mm
Description The 4000 Series offers up to 8600 in-lb of torque and 25 gpm (continuous ratings). This is the corner stone of the Char-Lynn line.
Highlights Features ety of mounting flanges and output shafts options Benefits motor into a system tough applications Applications Description The 0 Series offers up to 0 in-lb of torque and gpm (continuous
...our linkages, your solution. Ball & Socket Joints
...our linkaes, your solution Ball & Socket ov-ball-and-socket-joints-divider - Updated - 12-01-2017 Overview Ball & Socket Ball & Socket Ball and Socket Ball and socket joints to DIN 71802 available in
Mechanically actuated valves
Mechanically actuated valves /2-5/2 spool valves with /8 NPT threaded ports Installation in any position Comprehensive range of actuations, direct or servo-piloted Special versions on request Materials
Needle Valves. We deliver confidence through quality products
We deliver confidence through quality products INTRODUCTION NEEDLE VALVES SD range of Needle valves come in various sizes, sealing styles, end connections and stem types. They are available in bar stock
NELES ROTARYGLOBE CONTROL VALVE, SERIES ZX
NLS ROTRYGLOB CONTROL VLV, SRIS ZX Metso's Neles RotaryGlobe control valve is designed to control a wide range of process liquids, gases and vapors. Its reliable and rugged construction with variety of
type AKS and ESM Introduction
Temperature sensors type AKS and ESM Introduction Temperature sensors AKS and ESM are temperature dependent resistance sensors. The sensor unit consists of a platinum element the resistance value of which
Category 5e Shielded Keystone Panel Mount Coupler
Category 5e Shielded Keystone Panel Mount Coupler Category 5e Shielded Keystone Panel Mount Coupler (FACK2S) Features Designed to fit industry standard keystone outlets, wall plates and patch panels High
V New HGP 20. Standard grippers 7.5. Economical and versatile. Self centring. Choice of gripping action. Standard grippers.
V New HGP 20 Economical and versatile Self centring Choice of gripping action 2004/10 Subject to change Products 2004/2005 1 / 1 Key features HGD HGP 06 HGP... B HGR HGW System product for handling and
RBL High-pressure AISI 316L stainless steel. For all fluids
RBL High-pressure AISI 316L stainless steel For all fluids Connections in high-pressure circuits carrying corrosive liquids and gases... Applications - High-pressure hydrogen circuits - High-pressure circuits
BROEN UNIFLEX FITTINGS FOR NON-BURNING 2.0 GASES / VACUUM
BROEN UNIFLEX FITTINGS FOR NON-BURNING 2.0 GASES / ACUUM LAB TABLE OF CONTENTS Content Page Table of Content 2 Product Overview 3 BROEN UniFlex TM BASIC 4-5 Fittings for Non-burnig 2.0 Gases/acuum Turret
QUALITY WEATHERPROOF ELECTRICAL EQUIPMENT
MIDWEST ELETRI PRODUTS, IN IR ONDITIONIN DISONNETS Metallic & Non-Metallic QULITY WETHERPROOF ELETRIL EQUIPMENT / DISONNETS P065P1 PPLITION INFORMTION rticle 440 of the National Electrical ode applies
Areamaster 250/400 Integrally Ballasted Floodlights 100 W to 400 W HID For hazardous and marine locations.
Lighting HID NEC/CEC ENCLOSED AND GASKETED CLASS/ZONE RATED FLOODLIGHT Applications Powerful, efficient weatherproof lighting for medium and large areas such as: Pulp and paper mills Processing plants
Plant, components and devices for very high and high pressures (7000 bar and over)
Plant, components and devices for very high and high pressures (7000 bar and over) VALVES AND FITTINGS UP TO 1035 BAR MATERIALS All fittings are manufactured from EN 1.4404 / AISI 316L stainless steel
Dieter Marquardt Medizintechnik GmbH 08 Cannulated Screws
Cannulated Screws Product Name: Cannulated Screw Ø 3.5 Screw diameter: 3.5 mm Core diameter: 2.5 mm Head diameter: 5.0 mm Thread: short or full Cannulation: 1.35 mm Inner hexagon: 2.5 mm Screw Length:
P SERIES. 250 psi NFPA Pneumatic Cylinder TECHNICAL BROCHURE. Bore Sizes from 11/2 to 14
Actuation Solutions and Systems for the P SERIES 250 psi NFPA Pneumatic Cylinder Bore Sizes from 11/2 to 14 Actuation Solutions and Systems for the Design & Materials Temperature Ratings Low Temp. -54
The Custom Interconnect Leader
QC Series 1.24 (31.5) 0.93 TYP (23.6) 0.180 (4.6) 0.413 (10.5) 0.112 (2.8) Figure 1: Standard 1.25" Mounting ELECTRICAL Nominal Impedance: Frequency Range: Voltage Rating: Dielectric Withstanding Voltage:
WINSTA-R. Distal Radius System
Distal Radius System Table of Contents Introduction WINSTA-R System 2 Indication 2 Surgical Technique Palmar Access for Radius Plate 3 Dorsal Access for Radius Plate 3 Positioning of the Radius Plate
Modular Structural Parts Knee Joints
Prosthetic knee joint systems are used to replace the missing healthy knee joint. Their design must therefore meet very high technical demands in order to enable the amputee to live a carefree life again.
Compressor Accessories
Compressor Accessories Series 11 Superior quality for superior performance COMPRESSOR OIL Description MINERAL 11.1100 1 litre container 11.1400 4 litre container SYNTHETIC 11.1200 1 litre container 11.1500
Fluid Cooling Shell & Tube HC Series
Fluid Cooling hell & ube HC eries 0916 COPPE & EE CONUCION Performance Notes Preferred for new oil-water applications ugged steel construction ow cost NP, E O-ing, E flange, or PP shell side connections
Axle Counting Cable Accessories
Axle Counting Cable Accessories Cable Joint Kits Earth Bond Kits Moisture Barrier Kits Disaster Recovery Joint Kits Gapping Kits For Electrified & Non Electrified Railway Infrastructure Approval; Network
PRODUCT CATALOG SIMPLE IMPLANT SOLUTIONS FOR THE MODERN DENTIST
SIMPLE IMPLANT SOLUTIONS FOR THE MODERN DENTIST INDEX Index 1 Spare Tools 7 Implant 2 Spare Restoration Tools Cont d Accessories 89 Implant 3 Restoration Implant Motor Accessories 10 9 Restoration 4 Implant
Applications. Projected Area: 1.9 Sq. Ft. Dimensions in Inches/Millimeters
NEC/CEC: Applications Powerful, efficient weatherproof lighting for medium and large areas such as: Shopping malls Parking lots Sports areas New-car lot lighting Security lighting Industrial process lighting
FITTINGS. Pneufit C composite and Pneufit M fittings Inch Ø 1/8" to 1/2" O/D tube
Pneufit C composite and Pneufit M fittings Ø 1/8" to 1/2" Ready to use. Over 1,000 composite push-in pneumatic fittings. Releasable stainless-steel grab-ring to grip nylon or polyurethane (8 or 9 durometer).
9.2 EXTERIOR SECTION. Bottom view 74 CDJ-2000NXS. Refer to 9.3 CONTROL PANEL SECTION. Refer to 9.6 SLOTIN MECHA SECTION. UXJCB. only AXJ5.
1 2 3 4 9.2 XTRIOR STION Refer to 9.3 ONTROL PNL STION. G 1 G H TT N4002 I 1 H 1 ottom view SLM 1 SPN 1 Pickup 1 Stteping motor 1 1 T J Refer to 9.6 SLOTIN MH STION. U 2 H 2 I 2 G 2 K UXJ only 2 2 2 2
TECH 2 Dew Point Retrofit Kit
TECH 2 Dew Point Retrofit Kit THORESON McCOSH TECH II Instruction Manual 412765A THORESON-McCOSH INC 1885 Thunderbird St. Troy MI. 48084 Phone 1-248-362-0960 Fax 1-248-362-5270 sales@thoresonmccosh.com
MICRO-MEGA INDEX. Endodontics. Obturation. Handpieces and Contra-Angles. Surgery Implantology. Air Programme. Hygiene. Maintenance.
MICRO-MEGA EDER René Janouch www.janouch-dental.cz INDEX Endodontics Page Manual root canal instruments - stainless steel 1-2 Apex Locator 2 Giromatic 2 Mecasonic 3 Sonic Air 3 Rotary - NiTi Method 3-4
TABLE OF CONTENTS 1.1. WARRANTY DAMAGED SHIPMENTS SERVICE INTRODUCTION UNPACKING AND INSTALLATION
TABLE OF CONTENTS EDITION 5 Section 1 - WARRANTY & SERVICE 1.1. WARRANTY 2 1.2. DAMAGED SHIPMENTS 2 1.3. SERVICE 2 Section 2 - INTRODUCTION 2.1. INTRODUCTION 3 Section 3 - GENERAL 3.1. UNPACKING AND INSTALLATION
Impact resistant PBT body in black for Pneufit C and light gray for Pneufit M.
Pneufit C composite and Pneufit M fittings Ø Â" to Ë" Ready to use. Over 1,000 composite push-in pneumatic fittings. Releasable stainless-steel grab-ring to grip nylon or polyurethane (85 or 95 durometer).
Installation, operation and service manual BMA 04
BMA 04 Please read this manual carefully before installing and using the BMA 04 safe measuring coupling. Wigersma & Sikkema warranty obligations do not apply in case of non-observance of this manual. 1
2.4 mm LCP Volar Column Distal Radius Plates. Part of the 2.4 mm LCP Distal Radius System.
2.4 mm LCP Volar Column Distal Radius Plates. Part of the 2.4 mm LCP Distal Radius System. 12 anatomically shaped volar plates Multiple screw options for fixedangle support to articular surface Combi holes
Union Bonnet Valves - VU6 Series
BlowOur Proof Back Seating Hardened Stem Thread Mountable Panel nut Metal Seal Bonnet Union Bonnet Valves VU6 Series Features Pressure rating up to 6000psig (13bar) @38 C (100 F) Temperature rating from
ELECTRONIC CIGARETTE KIT USER MANUAL
ELECTRONIC CIGARETTE KIT USER MANUAL Mouthpiece Sliding Top Cap CONGRATULATIONS ON PURCHASING YOUR TOTALLY WICKED OPTIMUS ELECTRONIC CIGARETTE KIT. Airflow Control Ring LED Indicator Light OLED Screen
Figure 1: The EVH board
TQS-PCB Test Kit The kit should contain 1. TriQuint-PCB ( Evaluation Board EVB) 2. Evaluation Host Board (EVH) 3. USB Cable 4. Extra 20-pin header Introduction This application note describes how to control
Needle Valves Catalog 4110-NV December 2010
Needle Valves Catalog 4110-NV December 2010 Series Needle Valves Catalog 4110-NV Introduction Parker Series nion onnet Valves have been engineered for use at pressures up to 6,000 (414 bar) and temperatures
Cannulas, Applicators, Collectors, Accessories and Extras
Cannulas, Applicators, Collectors, Accessories and Extras 2 Cannulas Infiltration Cannulas Infiltration Cannula Infiltration cannulas serve to (minimally) preinfiltrate the suction area with tumescent
Quick Sealing with a Twist to Connect Actuation Method
- Finger tighten seals up to 689 bar (10,000 psi) for pneumatic and hydraulic testing - Safe and Reliable leak tight connections to male and female threads - Eliminate thread damage, sealant and wrenches
OWNERS MANUAL UPPERTONE. Physical Therapy Equipment Model No. UT 93A
OWNERS MNUL UPPERTONE Physical Therapy Equipment Model No. UT 93 GPK Inc., 535 Floyd Smith Dr., El Cajon, C 900, 800-468-89, 69-593-738, Fax: 69-593-754, www.gpk.com TLE OF CONTENTS Uppertone Parts List
Signet 2850 Conductivity/Resistivity Sensor Electronics and Integral Systems
Signet 2850 Conductivity/Resistivity Sensor Electronics and Integral Systems Features Certificate of calibration supplied with all sensors. Universal Mount Custom cell constant programmed into the electronics.
Rexnord Express Weld Program Overview. Rexnord Express Weld Chain Program
Rexnord xpress Weld Program Overview Rexnord xpress Weld hain Program Rexnord xpress Weld Program he Rexnord xpress Weld Program Offering Rexnord has been providing solutions for tough applications for
External Hex 4.1 & 5.0 platform
Biomet 3i System External 4.1 & 5.0 platform Internal Certain 3.4, 4.1 & 5.0 platform Osseotite Standard Osseotite TG Osseotite CERTAIN 3i was founded in 1987 by Dr. Lazarra and Keith Beatty in West Palm
N4i Installation Manual. (picture of N4i screen)
N4i Installation Manual (picture of N4i screen) 1 Table of Contents N4i Computer Parts List... 4 Netpulse Stabilizer Bar Parts List... 6 Hardware List... 7 Tools Needed for Installation... 7 N4i Assembly
Assembly Instruction for Fiber Optic Series FOH Fischer Connectors
Assembly Instruction for Fiber Optic Series FOH Fischer Connectors Table des matières 1 Introduction... 3 2 Document history... 3 3 Definitions and Acronyms... 3 4 FOH Plugs & Receptacles with Potting